Add code to manage Uniperipheral reader IP instances. These DAIs are dedicated to capture and support I2S and IEC modes.
Signed-off-by: Arnaud Pouliquen arnaud.pouliquen@st.com --- sound/soc/sti/uniperif.h | 3 + sound/soc/sti/uniperif_reader.c | 362 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 365 insertions(+) create mode 100644 sound/soc/sti/uniperif_reader.c
diff --git a/sound/soc/sti/uniperif.h b/sound/soc/sti/uniperif.h index a8d9e94..f396958 100644 --- a/sound/soc/sti/uniperif.h +++ b/sound/soc/sti/uniperif.h @@ -1212,4 +1212,7 @@ int uni_player_init(struct platform_device *pdev, struct uniperif *uni_player); int uni_player_resume(struct uniperif *player);
+/* uniperiph reader */ +int uni_reader_init(struct platform_device *pdev, + struct uniperif *uni_reader); #endif diff --git a/sound/soc/sti/uniperif_reader.c b/sound/soc/sti/uniperif_reader.c new file mode 100644 index 0000000..7d83827 --- /dev/null +++ b/sound/soc/sti/uniperif_reader.c @@ -0,0 +1,362 @@ +/* + * Copyright (C) STMicroelectronics SA 2015 + * Authors: Arnaud Pouliquen arnaud.pouliquen@st.com + * for STMicroelectronics. + * License terms: GNU General Public License (GPL), version 2 + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> + +#include <sound/soc.h> + +#include "uniperif.h" + +/* + * Note: snd_pcm_hardware is linked to DMA controller but is declared here to + * integrate unireader capability in term of rate and supported channels + */ +const struct snd_pcm_hardware uni_reader_pcm_hw = { + .info = SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_MMAP_VALID, + .formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S16_LE, + + .rates = SNDRV_PCM_RATE_CONTINUOUS, + .rate_min = 8000, + .rate_max = 96000, + + .channels_min = 2, + .channels_max = 8, + + .periods_min = 2, + .periods_max = 48, + + .period_bytes_min = 128, + .period_bytes_max = 64 * PAGE_SIZE, + .buffer_bytes_max = 256 * PAGE_SIZE +}; + +/* + * uni_reader_irq_handler + * In case of error audio stream is stopped; stop action is protected via PCM + * stream lock to avoid race condition with trigger callback. + */ +static irqreturn_t uni_reader_irq_handler(int irq, void *dev_id) +{ + irqreturn_t ret = IRQ_NONE; + struct uniperif *reader = dev_id; + unsigned int status; + + if (reader->state == UNIPERIF_STATE_STOPPED) { + /* Unexpected IRQ: do nothing */ + dev_warn(reader->dev, "unexpected IRQ "); + return IRQ_HANDLED; + } + + /* Get interrupt status & clear them immediately */ + status = GET_UNIPERIF_ITS(reader); + SET_UNIPERIF_ITS_BCLR(reader, status); + + /* Check for fifo overflow error */ + if (unlikely(status & UNIPERIF_ITS_FIFO_ERROR_MASK(reader))) { + dev_err(reader->dev, "FIFO error detected"); + + snd_pcm_stream_lock(reader->substream); + snd_pcm_stop(reader->substream, SNDRV_PCM_STATE_XRUN); + snd_pcm_stream_unlock(reader->substream); + + return IRQ_HANDLED; + } + + return ret; +} + +static int uni_reader_prepare(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai); + struct uniperif *reader = priv->dai_data.uni; + struct snd_pcm_runtime *runtime = substream->runtime; + int transfer_size, trigger_limit; + int slot_width; + int count = 10; + + /* The reader should be stopped */ + if (reader->state != UNIPERIF_STATE_STOPPED) { + dev_err(reader->dev, "%s: invalid reader state %d", __func__, + reader->state); + return -EINVAL; + } + + /* Calculate transfer size (in fifo cells and bytes) for frame count */ + transfer_size = runtime->channels * UNIPERIF_FIFO_FRAMES; + + /* Calculate number of empty cells available before asserting DREQ */ + if (reader->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0) + trigger_limit = UNIPERIF_FIFO_SIZE - transfer_size; + else + /* + * Since SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 + * FDMA_TRIGGER_LIMIT also controls when the state switches + * from OFF or STANDBY to AUDIO DATA. + */ + trigger_limit = transfer_size; + + /* Trigger limit must be an even number */ + if ((!trigger_limit % 2) || + (trigger_limit != 1 && transfer_size % 2) || + (trigger_limit > UNIPERIF_CONFIG_DMA_TRIG_LIMIT_MASK(reader))) { + dev_err(reader->dev, "invalid trigger limit %d", trigger_limit); + return -EINVAL; + } + + SET_UNIPERIF_CONFIG_DMA_TRIG_LIMIT(reader, trigger_limit); + + switch (reader->daifmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_IB_IF: + case SND_SOC_DAIFMT_NB_IF: + SET_UNIPERIF_I2S_FMT_LR_POL_HIG(reader); + break; + default: + SET_UNIPERIF_I2S_FMT_LR_POL_LOW(reader); + } + + /* Force slot width to 32 in I2S mode */ + if ((reader->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) + == SND_SOC_DAIFMT_I2S) { + slot_width = 32; + } else { + switch (runtime->format) { + case SNDRV_PCM_FORMAT_S16_LE: + slot_width = 16; + break; + default: + slot_width = 32; + break; + } + } + + /* Number of bits per subframe (i.e one channel sample) on input. */ + switch (slot_width) { + case 32: + SET_UNIPERIF_I2S_FMT_NBIT_32(reader); + SET_UNIPERIF_I2S_FMT_DATA_SIZE_32(reader); + break; + case 16: + SET_UNIPERIF_I2S_FMT_NBIT_16(reader); + SET_UNIPERIF_I2S_FMT_DATA_SIZE_16(reader); + break; + default: + dev_err(reader->dev, "subframe format not supported"); + return -EINVAL; + } + + /* Configure data memory format */ + switch (runtime->format) { + case SNDRV_PCM_FORMAT_S16_LE: + /* One data word contains two samples */ + SET_UNIPERIF_CONFIG_MEM_FMT_16_16(reader); + break; + + case SNDRV_PCM_FORMAT_S32_LE: + /* + * Actually "16 bits/0 bits" means "32/28/24/20/18/16 bits + * on the MSB then zeros (if less than 32 bytes)"... + */ + SET_UNIPERIF_CONFIG_MEM_FMT_16_0(reader); + break; + + default: + dev_err(reader->dev, "format not supported"); + return -EINVAL; + } + + switch (reader->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + SET_UNIPERIF_I2S_FMT_ALIGN_LEFT(reader); + SET_UNIPERIF_I2S_FMT_PADDING_I2S_MODE(reader); + break; + case SND_SOC_DAIFMT_LEFT_J: + SET_UNIPERIF_I2S_FMT_ALIGN_LEFT(reader); + SET_UNIPERIF_I2S_FMT_PADDING_SONY_MODE(reader); + break; + case SND_SOC_DAIFMT_RIGHT_J: + SET_UNIPERIF_I2S_FMT_ALIGN_RIGHT(reader); + SET_UNIPERIF_I2S_FMT_PADDING_SONY_MODE(reader); + break; + default: + dev_err(reader->dev, "format not supported"); + return -EINVAL; + } + + SET_UNIPERIF_I2S_FMT_ORDER_MSB(reader); + + /* Data clocking (changing) on the rising edge */ + SET_UNIPERIF_I2S_FMT_SCLK_EDGE_RISING(reader); + + /* Number of channels must be even */ + + if ((runtime->channels % 2) || (runtime->channels < 2) || + (runtime->channels > 10)) { + dev_err(reader->dev, "%s: invalid nb of channels", __func__); + return -EINVAL; + } + + SET_UNIPERIF_I2S_FMT_NUM_CH(reader, runtime->channels / 2); + + /* Clear any pending interrupts */ + SET_UNIPERIF_ITS_BCLR(reader, GET_UNIPERIF_ITS(reader)); + + SET_UNIPERIF_I2S_FMT_NO_OF_SAMPLES_TO_READ(reader, 0); + + /* Set the interrupt mask */ + SET_UNIPERIF_ITM_BSET_DMA_ERROR(reader); + SET_UNIPERIF_ITM_BSET_FIFO_ERROR(reader); + SET_UNIPERIF_ITM_BSET_MEM_BLK_READ(reader); + + /* Enable underflow recovery interrupts */ + if (reader->info->underflow_enabled) { + SET_UNIPERIF_ITM_BSET_UNDERFLOW_REC_DONE(reader); + SET_UNIPERIF_ITM_BSET_UNDERFLOW_REC_FAILED(reader); + } + + /* Reset uniperipheral reader */ + SET_UNIPERIF_SOFT_RST_SOFT_RST(reader); + + while (GET_UNIPERIF_SOFT_RST_SOFT_RST(reader)) { + udelay(5); + count--; + } + if (!count) { + dev_err(reader->dev, "Failed to reset uniperif"); + return -EIO; + } + + return 0; +} + +static int uni_reader_start(struct uniperif *reader) +{ + /* The reader should be stopped */ + if (reader->state != UNIPERIF_STATE_STOPPED) { + dev_err(reader->dev, "%s: invalid reader state", __func__); + return -EINVAL; + } + + /* Enable reader interrupts (and clear possible stalled ones) */ + SET_UNIPERIF_ITS_BCLR_FIFO_ERROR(reader); + SET_UNIPERIF_ITM_BSET_FIFO_ERROR(reader); + + /* Launch the reader */ + SET_UNIPERIF_CTRL_OPERATION_PCM_DATA(reader); + + /* Update state to started */ + reader->state = UNIPERIF_STATE_STARTED; + return 0; +} + +static int uni_reader_stop(struct uniperif *reader) +{ + /* The reader should not be in stopped state */ + if (reader->state == UNIPERIF_STATE_STOPPED) { + dev_err(reader->dev, "%s: invalid reader state", __func__); + return -EINVAL; + } + + /* Turn the reader off */ + SET_UNIPERIF_CTRL_OPERATION_OFF(reader); + + /* Disable interrupts */ + SET_UNIPERIF_ITM_BCLR(reader, GET_UNIPERIF_ITM(reader)); + + /* Update state to stopped and return */ + reader->state = UNIPERIF_STATE_STOPPED; + + return 0; +} + +static int uni_reader_trigger(struct snd_pcm_substream *substream, + int cmd, struct snd_soc_dai *dai) +{ + struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai); + struct uniperif *reader = priv->dai_data.uni; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + return uni_reader_start(reader); + case SNDRV_PCM_TRIGGER_STOP: + return uni_reader_stop(reader); + default: + return -EINVAL; + } +} + +static void uni_reader_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai); + struct uniperif *reader = priv->dai_data.uni; + + if (reader->state != UNIPERIF_STATE_STOPPED) { + /* Stop the reader */ + uni_reader_stop(reader); + } +} + +static int uni_reader_parse_dt(struct platform_device *pdev, + struct uniperif *reader) +{ + struct uniperif_info *info; + struct device_node *node = pdev->dev.of_node; + + /* Allocate memory for the info structure */ + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + of_property_read_u32(node, "version", &reader->ver); + + /* Save the info structure */ + reader->info = info; + + return 0; +} + +const struct snd_soc_dai_ops uni_reader_dai_ops = { + .shutdown = uni_reader_shutdown, + .prepare = uni_reader_prepare, + .trigger = uni_reader_trigger, + .hw_params = sti_uniperiph_dai_hw_params, + .set_fmt = sti_uniperiph_dai_set_fmt, +}; + +int uni_reader_init(struct platform_device *pdev, + struct uniperif *reader) +{ + int ret = 0; + + reader->dev = &pdev->dev; + reader->state = UNIPERIF_STATE_STOPPED; + reader->hw = &uni_reader_pcm_hw; + reader->dai_ops = &uni_reader_dai_ops; + + dev_err(reader->dev, "%s: enter\n", __func__); + ret = uni_reader_parse_dt(pdev, reader); + if (ret < 0) { + dev_err(reader->dev, "Failed to parse DeviceTree"); + return ret; + } + + ret = devm_request_irq(&pdev->dev, reader->irq, + uni_reader_irq_handler, IRQF_SHARED, + dev_name(&pdev->dev), reader); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to request IRQ"); + return -EBUSY; + } + + return 0; +} +EXPORT_SYMBOL_GPL(uni_reader_init);