Hi
On Thu, Apr 18, 2019 at 08:50:48AM +0000, S.j. Wang wrote:
And this is according to IMX6DQRM: Limited support for the case when output sampling rates is between 8kHz and 30kHz. The limitation is the supported ratio (Fsin/Fsout) range as between 1/24 to 8
This should cover your 8.125 condition already, even if having an outrate range between [8KHz, 30KHz] check, since an outrate above 30KHz will not have an inrate bigger than 8.125 times of it, given the maximum input rate is 192KHz.
So I think that we can just drop that 8.125 condition from your change and there's no need to error out any more.
No, if outrate=8kHz, inrate > 88.2kHz, these cases are not supported. This is not covered by
if ((outrate > 8000 && outrate < 30000) && (outrate/inrate > 24 || inrate/outrate > 8)) {Good catch. The range should be [8KHz, 30KHz] vs. (8KHz, 32KHz) in the code. Then I think the fix should be at both lines:
if ((outrate > 8000 && outrate < 30000) &&(outrate/inrate > 24 || inrate/outrate > 8)) {
if ((outrate >= 8000 && outrate =< 30000) &&(outrate > 24 * inrate || inrate > 8 * outrate)) {Overall, I think we should fix this instead of adding an extra one, since it is very likely saying the same thing.
Actually if outrate < 8kHz, there will be issue too.
Best regards Wang shengjiu