The headphone jack on buddy was broken with the following commit: commit 6b5da66322c5 ("ASoC: rt5645: read jd1_1 status for jd detection"). This changes the jd_mode for buddy to 4 so buddy can read from the same register that was used in the working version of this driver without affecting any other devices that might use this, since no other device uses jd_mode = 4. To test this I plugged and uplugged the headphone jack, verifying audio works.
Signed-off-by: Jacob Rasmussen jacobraz@google.com --- sound/soc/codecs/rt5645.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index a15e4ecd2a24..046f339a9f00 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -3270,6 +3270,9 @@ static void rt5645_jack_detect_work(struct work_struct *work) snd_soc_jack_report(rt5645->mic_jack, report, SND_JACK_MICROPHONE); return; + case 4: + val = snd_soc_component_read32(rt5645->component, RT5645_A_JD_CTRL1) & 0x002; + break; default: /* read rt5645 jd1_1 status */ val = snd_soc_component_read32(rt5645->component, RT5645_INT_IRQ_ST) & 0x1000; break; @@ -3603,7 +3606,7 @@ static const struct rt5645_platform_data intel_braswell_platform_data = { static const struct rt5645_platform_data buddy_platform_data = { .dmic1_data_pin = RT5645_DMIC_DATA_GPIO5, .dmic2_data_pin = RT5645_DMIC_DATA_IN2P, - .jd_mode = 3, + .jd_mode = 4, .level_trigger_irq = true, };
@@ -4012,6 +4015,7 @@ static int rt5645_i2c_probe(struct i2c_client *i2c, RT5645_JD1_MODE_1); break; case 3: + case 4: regmap_update_bits(rt5645->regmap, RT5645_A_JD_CTRL1, RT5645_JD1_MODE_MASK, RT5645_JD1_MODE_2);