On Thu, Aug 20, 2020 at 09:30:13AM +0200, Cezary Rojewski wrote:
On 2020-08-17 1:12 PM, Cezary Rojewski wrote:
On 2020-08-13 8:51 PM, Andy Shevchenko wrote:
On Wed, Aug 12, 2020 at 10:57:42PM +0200, Cezary Rojewski wrote:
...
+#define CATPT_DMA_MAXBURST 0x3
We have DMA engine definitions for that, please avoid magic numbers.
As with most of the dma stuff, based on existing: /sound/soc/intel/common/sst-firmware.c SST_DSP_DMA_MAX_BURST
Ack.
Actually, wasn't able to find anything _MAXBURST related in dmaengine.h. _BUSWIDTH_ have their constants defined there, true, but I'm already making use of these and this is dst/src_maxburst we're talking about. From what I've seen in kernel sources, most usages are direct assignments: xxx_maxburst = Y;
Okay, and how 0x3 bytes can be a burst? Does DMA engine support this?
...
+ /* set D3 */ + catpt_updatel_pci(cdev, PMCS, CATPT_PMCS_PS, CATPT_PMCS_PS_D3HOT); + udelay(50);
Don't we have PCI core function for this?
+ /* set D0 */ + catpt_updatel_pci(cdev, PMCS, CATPT_PMCS_PS, 0); + udelay(100);
Ditto.
+ /* set D3 */ + catpt_updatel_pci(cdev, PMCS, CATPT_PMCS_PS, CATPT_PMCS_PS_D3HOT); + udelay(50);
Ditto.
+ /* set D0 */ + catpt_updatel_pci(cdev, PMCS, CATPT_PMCS_PS, 0);
Ditto.
Thanks to you now I know the correct answer: yes. Ack for all of these. Good advice Andy, again!
Similar situation occurred here. What we're dealing with is: instance of 'struct platform_device' type, found on bus: acpi with PCI set as a parent device.
Scope found in DSDT: _SB_.PCI0.ADSP sysfs device path: /sys/devices/pci0000:00/INT3438:00 Within the latter _no_ standard utility files will be available e.g.: ability to dump PCI config space, bars and such.
I see. Can you dump DSDT somewhere? We are interested in PSx/PRx/PSE/PSW/PSC/PRE/PRW/ON/OFF (x=0..3) methods.
I haven't found any functionality to extract "pci_companion" from a platform_device. What can be made use of is: PCI_D3hot and PCI_D0 enum constants, as pci_set_power_state() does not apply - expects struct pci_dev *.
Perhaps got misled by the function naming? catpt_updatel_xxx helpers: _xxx denotes specific ADSP device's mmio space. Almost all cases are covered by _pci and _shim.
If we really need to use these commands directly, utilize at least definitions from PCI core, e.g. PCI_D0, PCI_D3hot, PCI_PM_CTRL.