On Thu, Aug 29, 2019 at 10:52 AM Srinivas Kandagatla srinivas.kandagatla@linaro.org wrote:
Thanks for the review!
On 29/08/2019 16:46, Rob Herring wrote:
On Thu, Aug 29, 2019 at 9:45 AM Srinivas Kandagatla srinivas.kandagatla@linaro.org wrote:
This patch adds bindings for WSA8810/WSA8815 Class-D Smart Speaker Amplifier. This Amplifier also has a simple thermal sensor for over temperature and speaker protection.
Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org
.../bindings/sound/qcom,wsa881x.yaml | 41 +++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml
diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml new file mode 100644 index 000000000000..7a486c024732 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0
Dual license please.
Will do that!
+%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,wsa881x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Bindings for Qualcomm WSA8810/WSA8815 Class-D Smart Speaker Amplifier
+maintainers:
- Srinivas Kandagatla srinivas.kandagatla@linaro.org
+description: |
- WSA8810 is a class-D smart speaker amplifier and WSA8815
- is a high-output power class-D smart speaker amplifier.
- Their primary operating mode uses a SoundWire digital audio
- interface. This binding is for SoundWire interface.
+properties:
- compatible:
- const: "sdw10217201000"
No need for quotes.
Did not knew that! Still getting used to yaml stuff :-)
- reg:
- maxItems: 1
- powerdown-gpios:
- description: GPIO spec for Powerdown/Shutdown line to use
- maxItems: 1
- '#thermal-sensor-cells':
- const: 0
Either of these required?
"make dt_binding_check" was complaining when I added this! Let me retry it!
Because the example in soundwire-controller.yaml will no longer be valid... :)