The Freescale P1022 is a dual-core e500-based SOC with multimedia capabilities, specifically the same SSI audio controller on the MPC8610. The P1022 DS reference board includes a P1022 and a Wolfson Microelectronics WM8776 codec.
Signed-off-by: Timur Tabi timur@freescale.com --- sound/soc/fsl/Kconfig | 24 ++- sound/soc/fsl/Makefile | 8 +- sound/soc/fsl/p1022_ds.c | 590 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 614 insertions(+), 8 deletions(-) create mode 100644 sound/soc/fsl/p1022_ds.c
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index 9818687..d754d34 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -1,24 +1,36 @@ config SND_MPC52xx_DMA tristate
-# ASoC platform support for the Freescale MPC8610 SOC. This compiles drivers -# for the SSI and the Elo DMA controller. You will still need to select -# a platform driver and a codec driver. -config SND_SOC_MPC8610 +# ASoC platform support for the Freescale PowerPC SOCs that have an SSI and +# an Elo DMA controller, such as the MPC8610 and P1022. You will still need to +# select a platform driver and a codec driver. +config SND_SOC_POWERPC_SSI tristate - depends on MPC8610 + depends on FSL_SOC
config SND_SOC_MPC8610_HPCD tristate "ALSA SoC support for the Freescale MPC8610 HPCD board" # I2C is necessary for the CS4270 driver depends on MPC8610_HPCD && I2C - select SND_SOC_MPC8610 + select SND_SOC_POWERPC_SSI select SND_SOC_CS4270 select SND_SOC_CS4270_VD33_ERRATA default y if MPC8610_HPCD help Say Y if you want to enable audio on the Freescale MPC8610 HPCD.
+config SND_SOC_P1022_DS + tristate "ALSA SoC support for the Freescale P1022 DS board" + # I2C is necessary for the WM8776 driver + depends on P1022_DS && I2C + select SND_SOC_POWERPC_SSI + select SND_SOC_WM8776 + default y if P1022_DS + help + Say Y if you want to enable audio on the Freescale P1022 DS board. + This will also include the Wolfson Microelectronics WM8776 codec + driver. + config SND_SOC_MPC5200_I2S tristate "Freescale MPC5200 PSC in I2S mode driver" depends on PPC_MPC52xx && PPC_BESTCOMM diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile index 7e472a5..b4a38c0 100644 --- a/sound/soc/fsl/Makefile +++ b/sound/soc/fsl/Makefile @@ -2,10 +2,14 @@ snd-soc-mpc8610-hpcd-objs := mpc8610_hpcd.o obj-$(CONFIG_SND_SOC_MPC8610_HPCD) += snd-soc-mpc8610-hpcd.o
-# MPC8610 Platform Support +# P1022 DS Machine Support +snd-soc-p1022-ds-objs := p1022_ds.o +obj-$(CONFIG_SND_SOC_P1022_DS) += snd-soc-p1022-ds.o + +# Freescale PowerPC SSI/DMA Platform Support snd-soc-fsl-ssi-objs := fsl_ssi.o snd-soc-fsl-dma-objs := fsl_dma.o -obj-$(CONFIG_SND_SOC_MPC8610) += snd-soc-fsl-ssi.o snd-soc-fsl-dma.o +obj-$(CONFIG_SND_SOC_POWERPC_SSI) += snd-soc-fsl-ssi.o snd-soc-fsl-dma.o
# MPC5200 Platform Support obj-$(CONFIG_SND_MPC52xx_DMA) += mpc5200_dma.o diff --git a/sound/soc/fsl/p1022_ds.c b/sound/soc/fsl/p1022_ds.c new file mode 100644 index 0000000..f8176e8 --- /dev/null +++ b/sound/soc/fsl/p1022_ds.c @@ -0,0 +1,590 @@ +/** + * Freescale P1022DS ALSA SoC Machine driver + * + * Author: Timur Tabi timur@freescale.com + * + * Copyright 2010 Freescale Semiconductor, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/of_device.h> +#include <linux/slab.h> +#include <sound/soc.h> +#include <asm/fsl_guts.h> + +#include "fsl_dma.h" +#include "fsl_ssi.h" + +/* P1022-specific PMUXCR and DMUXCR bit definitions */ + +#define CCSR_GUTS_PMUXCR_UART0_I2C1_MASK 0x0001c000 +#define CCSR_GUTS_PMUXCR_UART0_I2C1_UART0_SSI 0x00010000 +#define CCSR_GUTS_PMUXCR_UART0_I2C1_SSI 0x00018000 + +#define CCSR_GUTS_PMUXCR_SSI_DMA_TDM_MASK 0x00000c00 +#define CCSR_GUTS_PMUXCR_SSI_DMA_TDM_SSI 0x00000000 + +#define CCSR_GUTS_DMUXCR_PAD 1 /* DMA controller/channel set to pad */ +#define CCSR_GUTS_DMUXCR_SSI 2 /* DMA controller/channel set to SSI */ + +/* + * Set the DMACR register in the GUTS + * + * The DMACR register determines the source of initiated transfers for each + * channel on each DMA controller. Rather than have a bunch of repetitive + * macros for the bit patterns, we just have a function that calculates + * them. + * + * guts: Pointer to GUTS structure + * co: The DMA controller (0 or 1) + * ch: The channel on the DMA controller (0, 1, 2, or 3) + * device: The device to set as the target (CCSR_GUTS_DMUXCR_xxx) + */ +static inline void guts_set_dmuxcr(struct ccsr_guts_85xx __iomem *guts, + unsigned int co, unsigned int ch, unsigned int device) +{ + unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch)); + + clrsetbits_be32(&guts->dmuxcr, 3 << shift, device << shift); +} + +/* There's only one global utilities register */ +static phys_addr_t guts_phys; + +#define DAI_NAME_SIZE 32 + +/** + * machine_data: machine-specific ASoC device data + * + * This structure contains data for a single sound platform device on an + * P1022 DS. Some of the data is taken from the device tree. + */ +struct machine_data { + struct snd_soc_dai_link dai[2]; + struct snd_soc_card card; + unsigned int dai_format; + unsigned int codec_clk_direction; + unsigned int cpu_clk_direction; + unsigned int clk_frequency; + unsigned int ssi_id; /* 0 = SSI1, 1 = SSI2, etc */ + unsigned int dma_id[2]; /* 0 = DMA1, 1 = DMA2, etc */ + unsigned int dma_channel_id[2]; /* 0 = ch 0, 1 = ch 1, etc*/ + char codec_name[DAI_NAME_SIZE]; + char platform_name[2][DAI_NAME_SIZE]; /* One for each DMA channel */ +}; + +/** + * p1022_ds_machine_probe: initialize the board + * + * This function is used to initialize the board-specific hardware. + * + * Here we program the DMACR and PMUXCR registers. + */ +static int p1022_ds_machine_probe(struct platform_device *sound_device) +{ + struct snd_soc_card *card = platform_get_drvdata(sound_device); + struct machine_data *mdata = + container_of(card, struct machine_data, card); + struct ccsr_guts_85xx __iomem *guts; + + guts = ioremap(guts_phys, sizeof(struct ccsr_guts_85xx)); + if (!guts) { + dev_err(card->dev, "could not map global utilities\n"); + return -ENOMEM; + } + + /* Enable SSI Tx signal */ + clrsetbits_be32(&guts->pmuxcr, CCSR_GUTS_PMUXCR_UART0_I2C1_MASK, + CCSR_GUTS_PMUXCR_UART0_I2C1_UART0_SSI); + + /* Enable SSI Rx signal */ + clrsetbits_be32(&guts->pmuxcr, CCSR_GUTS_PMUXCR_SSI_DMA_TDM_MASK, + CCSR_GUTS_PMUXCR_SSI_DMA_TDM_SSI); + + /* Enable DMA Channel for SSI */ + guts_set_dmuxcr(guts, mdata->dma_id[0], mdata->dma_channel_id[0], + CCSR_GUTS_DMUXCR_SSI); + + guts_set_dmuxcr(guts, mdata->dma_id[1], mdata->dma_channel_id[1], + CCSR_GUTS_DMUXCR_SSI); + + iounmap(guts); + + return 0; +} + +/** + * p1022_ds_startup: program the board with various hardware parameters + * + * This function takes board-specific information, like clock frequencies + * and serial data formats, and passes that information to the codec and + * transport drivers. + */ +static int p1022_ds_startup(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct machine_data *mdata = + container_of(rtd->card, struct machine_data, card); + struct device *dev = rtd->card->dev; + int ret = 0; + + /* Tell the codec driver what the serial protocol is. */ + ret = snd_soc_dai_set_fmt(rtd->codec_dai, mdata->dai_format); + if (ret < 0) { + dev_err(dev, "could not set codec driver audio format\n"); + return ret; + } + + /* + * Tell the codec driver what the MCLK frequency is, and whether it's + * a slave or master. + */ + ret = snd_soc_dai_set_sysclk(rtd->codec_dai, 0, mdata->clk_frequency, + mdata->codec_clk_direction); + if (ret < 0) { + dev_err(dev, "could not set codec driver clock params\n"); + return ret; + } + + return 0; +} + +/** + * p1022_ds_machine_remove: Remove the sound device + * + * This function is called to remove the sound device for one SSI. We + * de-program the DMACR and PMUXCR register. + */ +static int p1022_ds_machine_remove(struct platform_device *sound_device) +{ + struct snd_soc_card *card = platform_get_drvdata(sound_device); + struct machine_data *mdata = + container_of(card, struct machine_data, card); + struct ccsr_guts_85xx __iomem *guts; + + guts = ioremap(guts_phys, sizeof(struct ccsr_guts_85xx)); + if (!guts) { + dev_err(card->dev, "could not map global utilities\n"); + return -ENOMEM; + } + + /* Restore the signal routing */ + clrbits32(&guts->pmuxcr, CCSR_GUTS_PMUXCR_UART0_I2C1_MASK); + clrbits32(&guts->pmuxcr, CCSR_GUTS_PMUXCR_SSI_DMA_TDM_MASK); + guts_set_dmuxcr(guts, mdata->dma_id[0], mdata->dma_channel_id[0], 0); + guts_set_dmuxcr(guts, mdata->dma_id[1], mdata->dma_channel_id[1], 0); + + iounmap(guts); + + return 0; +} + +/** + * p1022_ds_ops: ASoC machine driver operations + */ +static struct snd_soc_ops p1022_ds_ops = { + .startup = p1022_ds_startup, +}; + +/** + * get_node_by_phandle_name - get a node by its phandle name + * + * This function takes a node, the name of a property in that node, and a + * compatible string. Assuming the property is a phandle to another node, + * it returns that node, (optionally) if that node is compatible. + * + * If the property is not a phandle, or the node it points to is not compatible + * with the specific string, then NULL is returned. + */ +static struct device_node *get_node_by_phandle_name(struct device_node *np, + const char *name, const char *compatible) +{ + np = of_parse_phandle(np, name, 0); + if (!np) + return NULL; + + if (!of_device_is_compatible(np, compatible)) { + of_node_put(np); + return NULL; + } + + return np; +} + +/** + * get_parent_cell_index -- return the cell-index of the parent of a node + * + * Return the value of the cell-index property of the parent of the given + * node. This is used for DMA channel nodes that need to know the DMA ID + * of the controller they are on. + */ +static int get_parent_cell_index(struct device_node *np) +{ + struct device_node *parent = of_get_parent(np); + const u32 *iprop; + int ret = -1; + + if (!parent) + return -1; + + iprop = of_get_property(parent, "cell-index", NULL); + if (iprop) + ret = *iprop; + + of_node_put(parent); + + return ret; +} + +/** + * codec_node_dev_name - determine the dev_name for a codec node + * + * This function determines the dev_name for an I2C node. This is the name + * that would be returned by dev_name() if this device_node were part of a + * 'struct device' It's ugly and hackish, but it works. + * + * The dev_name for such devices include the bus number and I2C address. For + * example, "cs4270-codec.0-004f". + */ +static int codec_node_dev_name(struct device_node *np, char *buf, size_t len) +{ + const u32 *iprop; + int bus, addr; + char temp[DAI_NAME_SIZE]; + + of_modalias_node(np, temp, DAI_NAME_SIZE); + + iprop = of_get_property(np, "reg", NULL); + if (!iprop) + return -EINVAL; + + addr = *iprop; + + bus = get_parent_cell_index(np); + if (bus < 0) + return bus; + + snprintf(buf, len, "%s-codec.%u-%04x", temp, bus, addr); + + return 0; +} + +static int get_dma_channel(struct device_node *ssi_np, + const char *compatible, + struct snd_soc_dai_link *dai, + unsigned int *dma_channel_id, + unsigned int *dma_id) +{ + struct resource res; + struct device_node *dma_channel_np; + const u32 *iprop; + int ret; + + dma_channel_np = get_node_by_phandle_name(ssi_np, compatible, + "fsl,ssi-dma-channel"); + if (!dma_channel_np) + return -EINVAL; + + /* Determine the dev_name for the device_node. This code mimics the + * behavior of of_device_make_bus_id(). We need this because ASoC uses + * the dev_name() of the device to match the platform (DMA) device with + * the CPU (SSI) device. It's all ugly and hackish, but it works (for + * now). + * + * dai->platform name should already point to an allocated buffer. + */ + ret = of_address_to_resource(dma_channel_np, 0, &res); + if (ret) + return ret; + snprintf((char *)dai->platform_name, DAI_NAME_SIZE, "%llx.%s", + (unsigned long long) res.start, dma_channel_np->name); + + iprop = of_get_property(dma_channel_np, "cell-index", NULL); + if (!iprop) { + of_node_put(dma_channel_np); + return -EINVAL; + } + + *dma_channel_id = *iprop; + *dma_id = get_parent_cell_index(dma_channel_np); + of_node_put(dma_channel_np); + + return 0; +} + +/** + * p1022_ds_probe: platform probe function for the machine driver + * + * Although this is a machine driver, the SSI node is the "master" node with + * respect to audio hardware connections. Therefore, we create a new ASoC + * device for each new SSI node that has a codec attached. + */ +static int p1022_ds_probe(struct platform_device *pdev) +{ + struct device *dev = pdev->dev.parent; + /* ssi_pdev is the platform device for the SSI node that probed us */ + struct platform_device *ssi_pdev = + container_of(dev, struct platform_device, dev); + struct device_node *np = ssi_pdev->dev.of_node; + struct device_node *codec_np = NULL; + struct platform_device *sound_device = NULL; + struct machine_data *mdata; + int ret = -ENODEV; + const char *sprop; + const u32 *iprop; + + /* Find the codec node for this SSI. */ + codec_np = of_parse_phandle(np, "codec-handle", 0); + if (!codec_np) { + dev_err(dev, "could not find codec node\n"); + return -EINVAL; + } + + mdata = kzalloc(sizeof(struct machine_data), GFP_KERNEL); + if (!mdata) + return -ENOMEM; + + mdata->dai[0].cpu_dai_name = dev_name(&ssi_pdev->dev); + mdata->dai[0].ops = &p1022_ds_ops; + + /* Determine the codec name, it will be used as the codec DAI name */ + ret = codec_node_dev_name(codec_np, mdata->codec_name, DAI_NAME_SIZE); + if (ret) { + dev_err(&pdev->dev, "invalid codec node %s\n", + codec_np->full_name); + ret = -EINVAL; + goto error; + } + mdata->dai[0].codec_name = mdata->codec_name; + + /* We register two DAIs per SSI, one for playback and the other for + * capture. We support codecs that have separate DAIs for both playback + * and capture. + */ + memcpy(&mdata->dai[1], &mdata->dai[0], sizeof(struct snd_soc_dai_link)); + + /* The DAI names from the codec (snd_soc_dai_driver.name) */ + mdata->dai[0].codec_dai_name = "wm8776-hifi-playback"; + mdata->dai[1].codec_dai_name = "wm8776-hifi-capture"; + + /* Get the device ID */ + iprop = of_get_property(np, "cell-index", NULL); + if (!iprop) { + dev_err(&pdev->dev, "cell-index property not found\n"); + ret = -EINVAL; + goto error; + } + mdata->ssi_id = *iprop; + + /* Get the serial format and clock direction. */ + sprop = of_get_property(np, "fsl,mode", NULL); + if (!sprop) { + dev_err(&pdev->dev, "fsl,mode property not found\n"); + ret = -EINVAL; + goto error; + } + + if (strcasecmp(sprop, "i2s-slave") == 0) { + mdata->dai_format = SND_SOC_DAIFMT_I2S; + mdata->codec_clk_direction = SND_SOC_CLOCK_OUT; + mdata->cpu_clk_direction = SND_SOC_CLOCK_IN; + + /* In i2s-slave mode, the codec has its own clock source, so we + * need to get the frequency from the device tree and pass it to + * the codec driver. + */ + iprop = of_get_property(codec_np, "clock-frequency", NULL); + if (!iprop || !*iprop) { + dev_err(&pdev->dev, "codec bus-frequency " + "property is missing or invalid\n"); + ret = -EINVAL; + goto error; + } + mdata->clk_frequency = *iprop; + } else if (strcasecmp(sprop, "i2s-master") == 0) { + mdata->dai_format = SND_SOC_DAIFMT_I2S; + mdata->codec_clk_direction = SND_SOC_CLOCK_IN; + mdata->cpu_clk_direction = SND_SOC_CLOCK_OUT; + } else if (strcasecmp(sprop, "lj-slave") == 0) { + mdata->dai_format = SND_SOC_DAIFMT_LEFT_J; + mdata->codec_clk_direction = SND_SOC_CLOCK_OUT; + mdata->cpu_clk_direction = SND_SOC_CLOCK_IN; + } else if (strcasecmp(sprop, "lj-master") == 0) { + mdata->dai_format = SND_SOC_DAIFMT_LEFT_J; + mdata->codec_clk_direction = SND_SOC_CLOCK_IN; + mdata->cpu_clk_direction = SND_SOC_CLOCK_OUT; + } else if (strcasecmp(sprop, "rj-slave") == 0) { + mdata->dai_format = SND_SOC_DAIFMT_RIGHT_J; + mdata->codec_clk_direction = SND_SOC_CLOCK_OUT; + mdata->cpu_clk_direction = SND_SOC_CLOCK_IN; + } else if (strcasecmp(sprop, "rj-master") == 0) { + mdata->dai_format = SND_SOC_DAIFMT_RIGHT_J; + mdata->codec_clk_direction = SND_SOC_CLOCK_IN; + mdata->cpu_clk_direction = SND_SOC_CLOCK_OUT; + } else if (strcasecmp(sprop, "ac97-slave") == 0) { + mdata->dai_format = SND_SOC_DAIFMT_AC97; + mdata->codec_clk_direction = SND_SOC_CLOCK_OUT; + mdata->cpu_clk_direction = SND_SOC_CLOCK_IN; + } else if (strcasecmp(sprop, "ac97-master") == 0) { + mdata->dai_format = SND_SOC_DAIFMT_AC97; + mdata->codec_clk_direction = SND_SOC_CLOCK_IN; + mdata->cpu_clk_direction = SND_SOC_CLOCK_OUT; + } else { + dev_err(&pdev->dev, + "unrecognized fsl,mode property '%s'\n", sprop); + ret = -EINVAL; + goto error; + } + + if (!mdata->clk_frequency) { + dev_err(&pdev->dev, "unknown clock frequency\n"); + ret = -EINVAL; + goto error; + } + + /* Find the playback DMA channel to use. */ + mdata->dai[0].platform_name = mdata->platform_name[0]; + ret = get_dma_channel(np, "fsl,playback-dma", &mdata->dai[0], + &mdata->dma_channel_id[0], + &mdata->dma_id[0]); + if (ret) { + dev_err(&pdev->dev, "missing/invalid playback DMA phandle\n"); + goto error; + } + + /* Find the capture DMA channel to use. */ + mdata->dai[1].platform_name = mdata->platform_name[1]; + ret = get_dma_channel(np, "fsl,capture-dma", &mdata->dai[1], + &mdata->dma_channel_id[1], + &mdata->dma_id[1]); + if (ret) { + dev_err(&pdev->dev, "missing/invalid capture DMA phandle\n"); + goto error; + } + + /* Initialize our DAI data structure. */ + mdata->dai[0].stream_name = "playback"; + mdata->dai[1].stream_name = "capture"; + mdata->dai[0].name = mdata->dai[0].stream_name; + mdata->dai[1].name = mdata->dai[1].stream_name; + + mdata->card.probe = p1022_ds_machine_probe; + mdata->card.remove = p1022_ds_machine_remove; + mdata->card.name = pdev->name; /* The platform driver name */ + mdata->card.num_links = 2; + mdata->card.dai_link = mdata->dai; + + /* Allocate a new audio platform device structure */ + sound_device = platform_device_alloc("soc-audio", -1); + if (!sound_device) { + dev_err(&pdev->dev, "platform device alloc failed\n"); + ret = -ENOMEM; + goto error; + } + + /* Associate the card data with the sound device */ + platform_set_drvdata(sound_device, &mdata->card); + + /* Register with ASoC */ + ret = platform_device_add(sound_device); + if (ret) { + dev_err(&pdev->dev, "platform device add failed\n"); + goto error; + } + + of_node_put(codec_np); + + return 0; + +error: + of_node_put(codec_np); + + if (sound_device) + platform_device_unregister(sound_device); + + kfree(mdata); + + return ret; +} + +/** + * p1022_ds_remove: remove the platform device + * + * This function is called when the platform device is removed. + */ +static int __devexit p1022_ds_remove(struct platform_device *pdev) +{ + struct platform_device *sound_device = dev_get_drvdata(&pdev->dev); + struct snd_soc_card *card = platform_get_drvdata(sound_device); + struct machine_data *mdata = + container_of(card, struct machine_data, card); + + platform_device_unregister(sound_device); + + kfree(mdata); + sound_device->dev.platform_data = NULL; + + dev_set_drvdata(&pdev->dev, NULL); + + return 0; +} + +static struct platform_driver p1022_ds_driver = { + .probe = p1022_ds_probe, + .remove = __devexit_p(p1022_ds_remove), + .driver = { + /* The name must match the 'model' property in the device tree, + * in lowercase letters, but only the part after that last + * comma. This is because some model properties have a "fsl," + * prefix. + */ + .name = "snd-soc-p1022", + .owner = THIS_MODULE, + }, +}; + +/** + * p1022_ds_init: machine driver initialization. + * + * This function is called when this module is loaded. + */ +static int __init p1022_ds_init(void) +{ + struct device_node *guts_np; + struct resource res; + + pr_info("Freescale P1022 DS ALSA SoC machine driver\n"); + + /* Get the physical address of the global utilities registers */ + guts_np = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts"); + if (of_address_to_resource(guts_np, 0, &res)) { + pr_err("p1022-ds: missing/invalid global utilities node\n"); + return -EINVAL; + } + guts_phys = res.start; + of_node_put(guts_np); + + return platform_driver_register(&p1022_ds_driver); +} + +/** + * p1022_ds_exit: machine driver exit + * + * This function is called when this driver is unloaded. + */ +static void __exit p1022_ds_exit(void) +{ + platform_driver_unregister(&p1022_ds_driver); +} + +module_init(p1022_ds_init); +module_exit(p1022_ds_exit); + +MODULE_AUTHOR("Timur Tabi timur@freescale.com"); +MODULE_DESCRIPTION("Freescale P1022 DS ALSA SoC machine driver"); +MODULE_LICENSE("GPL v2");