19 Mar
2020
19 Mar
'20
3:01 p.m.
Jonghwan
On 3/19/20 9:00 AM, Jonghwan Choi wrote:
According to the tas2562 datasheet,the bits[5:1] represents the amp_level value. So to set the amp_level value correctly,the shift value should be set to 1.
Signed-off-by: Jonghwan Choi charlie.jh@kakaocorp.com
sound/soc/codecs/tas2562.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/codecs/tas2562.c b/sound/soc/codecs/tas2562.c index be52886a5edb..fb2233ca9103 100644 --- a/sound/soc/codecs/tas2562.c +++ b/sound/soc/codecs/tas2562.c @@ -409,7 +409,7 @@ static const struct snd_kcontrol_new vsense_switch = 1, 1);
static const struct snd_kcontrol_new tas2562_snd_controls[] = {
- SOC_SINGLE_TLV("Amp Gain Volume", TAS2562_PB_CFG1, 0, 0x1c, 0,
- SOC_SINGLE_TLV("Amp Gain Volume", TAS2562_PB_CFG1, 1, 0x1c, 0, tas2562_dac_tlv), };
Acked-by: Dan Murphy dmurphy@ti.com