Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.29.1 (root@ivan-laptop) (gcc version 4.4.0-alpha20090407 (prerelease) (Gentoo 4.4.0_alpha20090407) ) #1 SMP PREEMPT Tue Apr 14 21:52:56 YEKST 2009
Command line: quiet real_root=LABEL=laptop-root
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable)
 BIOS-e820: 00000000bfed0000 - 00000000bfee1000 (ACPI NVS)
 BIOS-e820: 00000000bfee1000 - 00000000c0000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0xbfed0 max_arch_pfn = 0x100000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
init_memory_mapping: 0000000000000000-00000000bfed0000
 0000000000 - 00bfe00000 page 2M
 00bfe00000 - 00bfed0000 page 4k
kernel direct mapping tables up to bfed0000 @ 8000-d000
last_map_addr: bfed0000 end: bfed0000
RAMDISK: 3649c000 - 37fef8dc
ACPI: RSDP 000F7AE0, 0024 (r2 PTLTD )
ACPI: XSDT BFED3841, 007C (r1 ACRSYS ACRPRDCT  6040000  LTP        0)
ACPI: FACP BFEDDC2A, 00F4 (r3 INTEL  CRESTLNE  6040000 ALAN        1)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT BFED4DB5, 8E01 (r2 INTEL  CRESTLNE  6040000 MSFT  3000001)
ACPI: FACS BFEE0FC0, 0040
ACPI: APIC BFEDDD1E, 0068 (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
ACPI: HPET BFEDDD86, 0038 (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
ACPI: MCFG BFEDDDBE, 003C (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
ACPI: APIC BFEDDDFA, 0068 (r1 PTLTD  	 APIC    6040000  LTP        0)
ACPI: BOOT BFEDDE62, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
ACPI: SLIC BFEDDE8A, 0176 (r1 ACRSYS ACRPRDCT  6040000 acer        0)
ACPI: SSDT BFED4AD8, 02DD (r1 SataRe SataAhci     1000 INTL 20050624)
ACPI: SSDT BFED3E79, 025F (r1  PmRef  Cpu0Tst     3000 INTL 20050624)
ACPI: SSDT BFED3DD3, 00A6 (r1  PmRef  Cpu1Tst     3000 INTL 20050624)
ACPI: SSDT BFED38BD, 0516 (r1  PmRef    CpuPm     3000 INTL 20050624)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-00000000bfed0000
Bootmem setup node 0 0000000000000000-00000000bfed0000
  NODE_DATA [000000000000b000 - 0000000000022fff]
  bootmap [0000000000023000 -  000000000003afdf] pages 18
(6 early reservations) ==> bootmem [0000000000 - 00bfed0000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0000200000 - 0001413550]    TEXT DATA BSS ==> [0000200000 - 0001413550]
  #3 [003649c000 - 0037fef8dc]          RAMDISK ==> [003649c000 - 0037fef8dc]
  #4 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
  #5 [0000008000 - 000000b000]          PGTABLE ==> [0000008000 - 000000b000]
found SMP MP-table at [ffff8800000f7b10] 000f7b10
 [ffffe20000000000-ffffe20004dfffff] PMD -> [ffff880001600000-ffff8800063fffff] on node 0
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x000bfed0
On node 0 totalpages: 786031
  DMA zone: 104 pages used for memmap
  DMA zone: 104 pages reserved
  DMA zone: 3791 pages, LIFO batch:0
  DMA32 zone: 19857 pages used for memmap
  DMA32 zone: 762175 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
PM: Registered nosave memory: 00000000000d0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Allocating 1892352 bytes of per cpu data
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 765966
Policy zone: DMA32
Kernel command line: quiet real_root=LABEL=laptop-root
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2399.836 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:  8
... MAX_LOCK_DEPTH:          48
... MAX_LOCKDEP_KEYS:        8191
... CLASSHASH_SIZE:          4096
... MAX_LOCKDEP_ENTRIES:     8192
... MAX_LOCKDEP_CHAINS:      16384
... CHAINHASH_SIZE:          8192
 memory used by lock dependency info: 4351 kB
 per task-struct memory footprint: 2688 bytes
allocated 31457280 bytes of page_cgroup
please try cgroup_disable=memory option if you don't want
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2982752k/3144512k available (3828k kernel code, 388k absent, 161372k reserved, 2361k data, 3012k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.67 BogoMIPS (lpj=2399836)
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
[ds] using Core 2/Atom configuration
CPU 0/0x0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
ACPI: Core revision 20081204
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 18582 entries in 147 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz stepping 06
lockdep: fixing up alternatives.
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4800.03 BogoMIPS (lpj=2400017)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
[ds] using Core 2/Atom configuration
CPU 1/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (9599.70 BogoMIPS).
CPU0 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 0 1
CPU1 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 1 0
khelper used greatest stack depth: 5368 bytes left
net_namespace: 2232 bytes
regulator: core version 0.5
Time: 19:07:57  Date: 04/17/09
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: missing confirmations, switch off interrupt mode.
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: No dock devices found.
ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8800bf673068), AE_NOT_FOUND
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f]
pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xf3604800-0xf3604bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf3600000-0xf3603fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x1840-0x185f]
pci 0000:00:1d.1: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1d.2: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xf3604c00-0xf3604fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0600 (mask 003f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0x18a0-0x18af]
pci 0000:00:1f.2: reg 10 io port: [0x18d8-0x18df]
pci 0000:00:1f.2: reg 14 io port: [0x18cc-0x18cf]
pci 0000:00:1f.2: reg 18 io port: [0x18d0-0x18d7]
pci 0000:00:1f.2: reg 1c io port: [0x18c8-0x18cb]
pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xf3604000-0xf36047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xf2000000-0xf2ffffff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xf0000000-0xf1ffffff]
pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xf0000000-0xf2ffffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.0: bridge io port: [0x00-0xfff]
pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0x000000-0x0fffff]
pci 0000:03:00.0: reg 10 32bit mmio: [0xf3100000-0xf3103fff]
pci 0000:03:00.0: supports D1 D2
pci 0000:02:00.0: bridge io port: [0x00-0xfff]
pci 0000:02:00.0: bridge 32bit mmio: [0x000000-0x0fffff]
pci 0000:02:00.0: bridge 64bit mmio pref: [0x000000-0x0fffff]
pci 0000:06:00.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.3: bridge io port: [0x00-0xfff]
pci 0000:00:1c.3: bridge 32bit mmio: [0x000000-0x0fffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0x000000-0x0fffff]
pci 0000:08:00.0: reg 10 64bit mmio: [0x000000-0x00ffff]
pci 0000:08:00.0: PME# supported from D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:00:1c.5: bridge io port: [0x00-0xfff]
pci 0000:00:1c.5: bridge 32bit mmio: [0x000000-0x0fffff]
pci 0000:00:1c.5: bridge 64bit mmio pref: [0x000000-0x0fffff]
pci 0000:0a:09.0: reg 10 32bit mmio: [0xf3300000-0xf33007ff]
pci 0000:0a:09.0: supports D1 D2
pci 0000:0a:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0a:09.0: PME# disabled
pci 0000:0a:09.1: reg 10 32bit mmio: [0xf3300800-0xf33008ff]
pci 0000:0a:09.1: supports D1 D2
pci 0000:0a:09.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0a:09.1: PME# disabled
pci 0000:0a:09.2: reg 10 32bit mmio: [0xf3300c00-0xf3300cff]
pci 0000:0a:09.2: supports D1 D2
pci 0000:0a:09.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0a:09.2: PME# disabled
pci 0000:0a:09.3: reg 10 32bit mmio: [0xf3301000-0xf33010ff]
pci 0000:0a:09.3: supports D1 D2
pci 0000:0a:09.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0a:09.3: PME# disabled
pci 0000:0a:09.4: reg 10 32bit mmio: [0xf3301400-0xf33014ff]
pci 0000:0a:09.4: supports D1 D2
pci 0000:0a:09.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0a:09.4: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xf3300000-0xf33fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8800bf673068), AE_NOT_FOUND
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
pci 0000:00:1c.0: BAR 7: can't allocate resource
pci 0000:00:1c.0: BAR 8: can't allocate resource
pci 0000:00:1c.0: BAR 9: can't allocate resource
pci 0000:02:00.0: BAR 7: can't allocate resource
pci 0000:02:00.0: BAR 8: can't allocate resource
pci 0000:02:00.0: BAR 9: can't allocate resource
pci 0000:00:1c.3: BAR 7: can't allocate resource
pci 0000:00:1c.3: BAR 8: can't allocate resource
pci 0000:00:1c.3: BAR 9: can't allocate resource
pci 0000:00:1c.5: BAR 7: can't allocate resource
pci 0000:00:1c.5: BAR 8: can't allocate resource
pci 0000:00:1c.5: BAR 9: can't allocate resource
pci 0000:03:00.0: BAR 0: can't allocate resource
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:06: ioport range 0x680-0x69f has been reserved
system 00:06: ioport range 0x800-0x80f has been reserved
system 00:06: ioport range 0x1000-0x107f has been reserved
system 00:06: ioport range 0x1180-0x11bf has been reserved
system 00:06: ioport range 0x1640-0x164f has been reserved
system 00:06: ioport range 0xfe00-0xfe00 has been reserved
pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0x2000-0x2fff
pci 0000:00:01.0:   MEM window: 0xf0000000-0xf2ffffff
pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
pci 0000:02:00.0:   IO window: disabled
pci 0000:02:00.0:   MEM window: 0xc2000000-0xc20fffff
pci 0000:02:00.0:   PREFETCH window: disabled
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: 0xc2000000-0xc20fffff
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.3:   IO window: disabled
pci 0000:00:1c.3:   MEM window: 0xc2100000-0xc21fffff
pci 0000:00:1c.3:   PREFETCH window: disabled
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08
pci 0000:00:1c.5:   IO window: disabled
pci 0000:00:1c.5:   MEM window: 0xc2200000-0xc22fffff
pci 0000:00:1c.5:   PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: 0xf3300000-0xf33fffff
pci 0000:00:1e.0:   PREFETCH window: disabled
  alloc irq_desc for 16 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0000 -> 0002)
  alloc irq_desc for 17 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:02:00.0: enabling device (0010 -> 0012)
pci 0000:02:00.0: setting latency timer to 64
pci 0000:00:1c.3: enabling device (0000 -> 0002)
  alloc irq_desc for 19 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.5: enabling device (0000 -> 0002)
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io:  [0x2000-0x2fff]
pci_bus 0000:01: resource 1 mem: [0xf0000000-0xf2ffffff]
pci_bus 0000:01: resource 2 mem: [0xd0000000-0xdfffffff]
pci_bus 0000:01: resource 3 mem: [0x0-0x0]
pci_bus 0000:02: resource 0 mem: [0x0-0xfff]
pci_bus 0000:02: resource 1 mem: [0xc2000000-0xc20fffff]
pci_bus 0000:02: resource 2 mem: [0x0-0xfffff]
pci_bus 0000:02: resource 3 mem: [0x0-0x0]
pci_bus 0000:03: resource 0 mem: [0x0-0xfff]
pci_bus 0000:03: resource 1 mem: [0xc2000000-0xc20fffff]
pci_bus 0000:03: resource 2 mem: [0x0-0xfffff]
pci_bus 0000:03: resource 3 mem: [0x0-0x0]
pci_bus 0000:06: resource 0 mem: [0x0-0xfff]
pci_bus 0000:06: resource 1 mem: [0xc2100000-0xc21fffff]
pci_bus 0000:06: resource 2 mem: [0x0-0xfffff]
pci_bus 0000:06: resource 3 mem: [0x0-0x0]
pci_bus 0000:08: resource 0 mem: [0x0-0xfff]
pci_bus 0000:08: resource 1 mem: [0xc2200000-0xc22fffff]
pci_bus 0000:08: resource 2 mem: [0x0-0xfffff]
pci_bus 0000:08: resource 3 mem: [0x0-0x0]
pci_bus 0000:0a: resource 0 mem: [0x0-0x0]
pci_bus 0000:0a: resource 1 mem: [0xf3300000-0xf33fffff]
pci_bus 0000:0a: resource 2 mem: [0x0-0x0]
pci_bus 0000:0a: resource 3 io:  [0x00-0xffff]
pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 10, 4718592 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 27982k freed
Simple Boot Flag at 0x35 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1239995280.010:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 5880
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: setting latency timer to 64
  alloc irq_desc for 24 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
  alloc irq_desc for 25 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.3: setting latency timer to 64
  alloc irq_desc for 26 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.5: setting latency timer to 64
  alloc irq_desc for 27 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8800bf673068), AE_NOT_FOUND
ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8800bf673068), AE_NOT_FOUND
ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8800bf673068), AE_NOT_FOUND
ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8800bf673068), AE_NOT_FOUND
ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8800bf673068), AE_NOT_FOUND
ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8800bf673068), AE_NOT_FOUND
ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8800bf673068), AE_NOT_FOUND
ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8800bf673068), AE_NOT_FOUND
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp_glue: can't get bus number, assuming 0
decode_hpp: Could not get hotplug parameters. Use defaults
acpiphp: Slot [1] registered
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery absent)
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
ACPI: Sleep Button (CM) [SLPB]
ACPI: SSDT BFED4754, 02BC (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
ACPI: SSDT BFED40D8, 05F7 (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT BFED4A10, 00C8 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
ACPI: SSDT BFED46CF, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (61 C)
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
Fixed MDIO Bus: probed
input: Macintosh mouse button emulation as /devices/virtual/input/input4
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  alloc irq_desc for 28 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 28
ata2: SATA max UDMA/133 abar m2048@0xf3604000 port 0xf3604180 irq 28
ata3: SATA max UDMA/133 abar m2048@0xf3604000 port 0xf3604200 irq 28
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ACPI Warning (nspredef-0934): \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer [20081204]
ata1.00: _GTF unexpected object type 0x1
ata1.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC31P, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: _GTF unexpected object type 0x1
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 < sda5 sda6 > sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata_piix 0000:00:1f.1: version 2.12
ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T40N, JP01, max UDMA/33
ata4.00: configured for UDMA/33
isa bounce pool size: 16 pages
scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T40N  JP01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  alloc irq_desc for 18 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf3604800
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.29.1 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
  alloc irq_desc for 23 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf3604c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.29.1 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.29.1 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
  alloc irq_desc for 21 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.29.1 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.29.1 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.29.1 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.29.1 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
Marking TSC unstable due to TSC halts in idle
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
  Magic number: 5:345:142
block ram7: hash matches
acpi device:13: hash matches
Freeing unused kernel memory: 3012k freed
Write protecting the kernel read-only data: 1880k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
ata1: hard resetting link
usb 1-2: new high speed USB device using ehci_hcd and address 2
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: _GTF unexpected object type 0x1
ata1.00: _GTF unexpected object type 0x1
ata1.00: configured for UDMA/133
ata1: EH complete
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: detected capacity change from 0 to 250059350016
usb 1-2: New USB device found, idVendor=064e, idProduct=a101
usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 1-2: Product: Acer CrystalEye webcam
usb 1-2: Manufacturer: SuYin
usb 1-2: SerialNumber: CN0314-OV03-VA-R02.00.00
usb 1-2: configuration #1 chosen from 1 choice
Clocksource tsc unstable (delta = -210315550 ns)
mdev used greatest stack depth: 5312 bytes left
Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1e0b1, caps: 0xc04751/0xe0500f
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input6
Synaptics Touchpad, model: 1, fw: 6.5, id: 0x81a0b1, caps: 0xa04711/0xa04000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
insmod used greatest stack depth: 5264 bytes left
GDT-HA: Storage RAID Controller Driver. Version: 3.05
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
insmod used greatest stack depth: 5184 bytes left
Fusion MPT FC Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Adaptec aacraid driver 1.1-5[2456]-ms
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
QLogic Fibre Channel HBA Driver: 8.03.00-k4
Emulex LightPulse Fibre Channel SCSI driver 8.3.0
Copyright(c) 2004-2008 Emulex.  All rights reserved.
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
sl811: driver sl811-hcd, 19 May 2005
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
async_tx: api initialized (async)
xor: automatically using best checksumming function: generic_sse
   generic_sse:  8872.000 MB/sec
xor: using function: generic_sse (8872.000 MB/sec)
raid6: int64x1   2085 MB/s
raid6: int64x2   2316 MB/s
raid6: int64x4   1957 MB/s
raid6: int64x8   1523 MB/s
raid6: sse2x1    4250 MB/s
raid6: sse2x2    4191 MB/s
raid6: sse2x4    7320 MB/s
raid6: using algorithm sse2x4 (7320 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
JFS: nTxBlock = 8192, nTxLock = 65536
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
fuse init (API version 7.11)
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
tg3.c:v3.97 (December 10, 2008)
tg3 0000:08:00.0: enabling device (0000 -> 0002)
tg3 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:08:00.0: setting latency timer to 64
tg3 0000:08:00.0: wake-up capability disabled by ACPI
tg3 0000:08:00.0: PME# disabled
eth0: Tigon3 [partno(BCM95787m) rev b002] (PCI Express) MAC address 00:1e:68:3f:33:e0
eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
EXT3-fs: sda6: couldn't mount because of unsupported optional features (240).
EXT4-fs: barriers enabled
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sda6 with ordered data mode
kjournald2 starting: pid 9456, dev sda6:8, commit interval 5 seconds
mkdir used greatest stack depth: 4968 bytes left
init-early.sh used greatest stack depth: 4344 bytes left
mknod used greatest stack depth: 4304 bytes left
udev: starting version 141
acpi device:04: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/device:03/input/input8
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
modprobe used greatest stack depth: 4264 bytes left
udev: renamed network interface eth0 to lan
ACPI: WMI: Mapper loaded
ricoh-mmc: Ricoh MMC Controller disabling driver
ricoh-mmc: Copyright(c) Philip Langdale
ricoh-mmc: Ricoh MMC controller found at 0000:0a:09.2 [1180:0843] (rev 12)
ricoh-mmc: Controller is now disabled.
iTCO_vendor_support: vendor-support=0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /devices/platform/pcspkr/input/input9
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f] conflicts with ACPI region SMBI [0x1c00-0x1c0f]
ACPI: Device needs an ACPI driver
cfg80211: Calling CRDA to update world regulatory domain
firewire_ohci 0000:0a:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
firewire_ohci: Added fw-ohci device 0000:0a:09.0, OHCI version 1.10
Linux video capture interface: v2.00
acer-wmi: Acer Laptop ACPI-WMI Extras
acer-wmi: Brightness must be controlled by generic video driver
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:0a:09.1: SDHCI controller found [1180:0822] (rev 22)
sdhci-pci 0000:0a:09.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
sdhci-pci 0000:0a:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:0a:09.1] using DMA
firewire_core: created device fw0: GUID 00241b00bc6ad300, S400
uvcvideo: Found UVC 1.00 device Acer CrystalEye webcam (064e:a101)
input: Acer CrystalEye webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
usb 7-1: new full speed USB device using uhci_hcd and address 2
usb 7-1: New USB device found, idVendor=0a5c, idProduct=2101
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-1: Product: Acer Module
usb 7-1: Manufacturer: Broadcom Corp
usb 7-1: configuration #1 chosen from 1 choice
Bluetooth: Core ver 2.14
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.4
usbcore: registered new interface driver btusb
  alloc irq_desc for 22 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
nvidia: module license 'NVIDIA' taints kernel.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
HDA Intel 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ALSA /home/ivan/stuff/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_codec.c:3796: autoconfig: line_outs=4 (0xb/0xd/0xc/0xe/0x0)
ALSA /home/ivan/stuff/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_codec.c:3800:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA /home/ivan/stuff/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_codec.c:3804:    hp_outs=1 (0xf/0x0/0x0/0x0/0x0)
ALSA /home/ivan/stuff/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_codec.c:3805:    mono: mono_out=0x0
ALSA /home/ivan/stuff/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_codec.c:3816:    inputs: mic=0x11, fmic=0x0, line=0x0, fline=0x0, cd=0x0, aux=0x0
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kds
iwl3945: Copyright(c) 2003-2008 Intel Corporation
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  180.44  Tue Mar 24 05:46:32 PST 2009
iwl3945 0000:06:00.0: enabling device (0000 -> 0002)
iwl3945 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
iwl3945 0000:06:00.0: setting latency timer to 64
iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
iwl3945: Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:06:00.0: PCI INT A disabled
wmaster0 (iwl3945): not using net_device_ops yet
phy0: Selected rate control algorithm 'iwl-3945-rs'
wlan0 (iwl3945): not using net_device_ops yet
udev: renamed network interface wlan0 to wlan
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 2 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa0fb2080
vboxdrv: fAsync=0 offMin=0x1b0 offMax=0x1494
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 2.1.4 (interface 0x000a0009).
VBoxNetFlt: dbg - g_abExecMemory=ffffffffa114b060
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
EXT4 FS on sda6, internal journal on sda6:8
EXT4-fs: barriers enabled
kjournald2 starting: pid 14005, dev sda4:8, commit interval 5 seconds
EXT4 FS on sda4, internal journal on sda4:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sda4 with ordered data mode
swap_cgroup: uses 16416 bytes of vmalloc for pointer array space and 8404992 bytes to hold mem_cgroup pointers on swap
swap_cgroup can be disabled by noswapaccount boot option.
Adding 4200956k swap on /dev/sda5.  Priority:-1 extents:1 across:4200956k 
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
Bluetooth: L2CAP ver 2.11
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.10
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
ip used greatest stack depth: 4112 bytes left
Bridge firewalling registered
IRQ 16/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
tg3 0000:08:00.0: wake-up capability disabled by ACPI
tg3 0000:08:00.0: PME# disabled
  alloc irq_desc for 29 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
tg3 0000:08:00.0: irq 29 for MSI/MSI-X
ADDRCONF(NETDEV_UP): lan: link is not ready
iwl3945 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
iwl3945 0000:06:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006)
  alloc irq_desc for 30 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
iwl3945 0000:06:00.0: irq 30 for MSI/MSI-X
iwl3945 0000:06:00.0: firmware: requesting iwlwifi-3945-2.ucode
iwl3945 loaded firmware version 15.28.2.8
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
ADDRCONF(NETDEV_UP): wlan: link is not ready
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:1102: Too big adjustment 32
hda-intel: Invalid position buffer, using LPIB read method instead.
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:1102: Too big adjustment 32
wlan: direct probe to AP 00:1e:58:ab:2b:7c try 1
wlan direct probe responded
wlan: authenticate with AP 00:1e:58:ab:2b:7c
wlan: authenticated
wlan: associate with AP 00:1e:58:ab:2b:7c
wlan: RX AssocResp from 00:1e:58:ab:2b:7c (capab=0x431 status=0 aid=1)
wlan: associated
cfg80211: Calling CRDA for country: NA
ADDRCONF(NETDEV_CHANGE): wlan: link becomes ready
wlan: no IPv6 routers present
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
pidgin used greatest stack depth: 4104 bytes left
usb 7-1: USB disconnect, address 2
btusb_intr_complete: hci0 urb ffff8800b7d9aa50 failed to resubmit (19)
btusb_send_frame: hci0 urb ffff8800ba515c60 submission failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed
ALSA /home/ivan/stuff/alsa-driver/acore/pcm_native.c:2040: snd_pcm_hw_constraints_complete failed