Raymond-- Thank you very much! hdajackretask from the alsa-tool-gui worked like a charm! (Had to tunnel X over my SSH terminal, but that's no biggie)
If only I had time to write an XBMC plugin for hdajackretask :-)
Thanks Again! --Scott
On Tue, Jun 17, 2014 at 7:39 AM, Raymond Yau superquad.vortex2@gmail.com wrote:
I have a Lenovo M55 SFF desktop I use for a media center computer (XBMCbuntu). It has the AD1983 chip on it. From the factory, it had 2 ports in the back (mic + speaker) , and 2 ports in the front (mic + speaker). It also has an on-board speaker.
It never shipped with a SPDIF output, but I soldered a wire to the AD1983 and installed an RCA jack on the back of the case. Earlier versions of XBMC shipped with a different version of alsa, and I was able to use this custom SPDIF output without issue for the last year or two, but the current version only enables the 'proper' inputs/outputs
I have tried editing the module options and specifying several different models, but the documentation doesn't list any 'model' options for the AD1983.
I suspect I need to overwrite the pin configs. cat init_pin_configs: 0x05 0x01014010 0x06 0x0221401f 0x07 0x991301f0 0x08 0x02a19020 0x09 0x0181302e 0x0a 0x414511f0
Node 0x0a [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x414511f0: [N/A] SPDIF Out at Ext Rear Conn = Optical, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Connection: 1 0x02
Use hda-jack-retask or early patching to change pin default of node 0x0a from [N/A] to [JACK]