On Mon, Feb 06, 2023 at 01:11:09PM +0000, Mark Brown wrote:
On Thu, Oct 27, 2022 at 09:38:38PM +1300, Daniel Beer wrote:
In tas5805m_refresh, we switch pages to update the DSP volume control, but we need to switch back to page 0 before trying to alter the soft-mute control. This latter page-switch was missing.
You should just use the register windowing support in regmap, it will take care of this for you, avoiding any further similar errors.
Hi Mark,
Thanks for reviewing.
We did discuss this a while back when the driver first went in. Unfortunately the vendor software tools provide configuration for the part in the form of a sequence of raw register writes, including explicit page changes:
https://lore.kernel.org/lkml/Yd85bjKEX9JnoOlI@sirena.org.uk/
Aside from this, I have two other practical issues.
The first is that I'm not sure how exactly to implement the paging scheme in terms of regmap_range_cfg (assuming this is what you're referring to). This chip has multi-level paging (books/pages), with the book selection register itself requiring paging to access. A sequence of three register writes is therefore required in the general case to select the correct page. I had a quick look at a random assortment of existing regmap_range_cfg uses, but didn't find anything that looked like the same problem.
Secondly, the patches as submitted here have been tested, but I don't currently have access to hardware. I'm very hesitant to make a significant change without retesting and leave the driver in a broken state again.
Cheers, Daniel