On 11/12/2014 12:49 PM, Jyri Sarha wrote:
Removes omap-hdmi DAI driver, omap-hdmi-card driver, the related Kconfig options, and Makefile entries. The HDMI DAI drivers has been integrated directly to OMAP4+ HDMI drivers and simple-card driver is used instead of omap-hdmi-card driver.
Signed-off-by: Jyri Sarha jsarha@ti.com
Acked-by: Peter Ujfalusi peter.ujfalusi@ti.com
sound/soc/omap/Kconfig | 13 -- sound/soc/omap/Makefile | 4 - sound/soc/omap/omap-hdmi-card.c | 87 ---------- sound/soc/omap/omap-hdmi.c | 364 --------------------------------------- sound/soc/omap/omap-hdmi.h | 38 ---- 5 files changed, 506 deletions(-) delete mode 100644 sound/soc/omap/omap-hdmi-card.c delete mode 100644 sound/soc/omap/omap-hdmi.c delete mode 100644 sound/soc/omap/omap-hdmi.h
diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig index 2b32b3e..3dfcadf 100644 --- a/sound/soc/omap/Kconfig +++ b/sound/soc/omap/Kconfig @@ -12,9 +12,6 @@ config SND_OMAP_SOC_MCBSP config SND_OMAP_SOC_MCPDM tristate
-config SND_OMAP_SOC_HDMI
- tristate
config SND_OMAP_SOC_HDMI_AUDIO tristate "HDMI audio support for OMAP4+ based SoCs" depends on SND_OMAP_SOC @@ -115,16 +112,6 @@ config SND_OMAP_SOC_OMAP_ABE_TWL6040 - PandaBoard (4430) - PandaBoardES (4460)
-config SND_OMAP_SOC_OMAP_HDMI
- tristate "SoC Audio support for Texas Instruments OMAP HDMI"
- depends on SND_OMAP_SOC && OMAP4_DSS_HDMI && OMAP2_DSS
- select SND_OMAP_SOC_HDMI
- select SND_SOC_HDMI_CODEC
- select OMAP4_DSS_HDMI_AUDIO
- help
Say Y if you want to add support for SoC HDMI audio on Texas Instruments
OMAP4 chips
config SND_OMAP_SOC_OMAP3_PANDORA tristate "SoC Audio support for OMAP3 Pandora" depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_PANDORA diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile index 40688a6..db36fbd 100644 --- a/sound/soc/omap/Makefile +++ b/sound/soc/omap/Makefile @@ -3,14 +3,12 @@ snd-soc-omap-objs := omap-pcm.o snd-soc-omap-dmic-objs := omap-dmic.o snd-soc-omap-mcbsp-objs := omap-mcbsp.o mcbsp.o snd-soc-omap-mcpdm-objs := omap-mcpdm.o -snd-soc-omap-hdmi-objs := omap-hdmi.o snd-soc-omap-hdmi-audio-objs := omap-hdmi-audio.o
obj-$(CONFIG_SND_OMAP_SOC) += snd-soc-omap.o obj-$(CONFIG_SND_OMAP_SOC_DMIC) += snd-soc-omap-dmic.o obj-$(CONFIG_SND_OMAP_SOC_MCBSP) += snd-soc-omap-mcbsp.o obj-$(CONFIG_SND_OMAP_SOC_MCPDM) += snd-soc-omap-mcpdm.o -obj-$(CONFIG_SND_OMAP_SOC_HDMI) += snd-soc-omap-hdmi.o obj-$(CONFIG_SND_OMAP_SOC_HDMI_AUDIO) += snd-soc-omap-hdmi-audio.o
# OMAP Machine Support @@ -22,7 +20,6 @@ snd-soc-am3517evm-objs := am3517evm.o snd-soc-omap-abe-twl6040-objs := omap-abe-twl6040.o snd-soc-omap-twl4030-objs := omap-twl4030.o snd-soc-omap3pandora-objs := omap3pandora.o -snd-soc-omap-hdmi-card-objs := omap-hdmi-card.o
obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o obj-$(CONFIG_SND_OMAP_SOC_RX51) += snd-soc-rx51.o @@ -32,4 +29,3 @@ obj-$(CONFIG_SND_OMAP_SOC_AM3517EVM) += snd-soc-am3517evm.o obj-$(CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040) += snd-soc-omap-abe-twl6040.o obj-$(CONFIG_SND_OMAP_SOC_OMAP_TWL4030) += snd-soc-omap-twl4030.o obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o -obj-$(CONFIG_SND_OMAP_SOC_OMAP_HDMI) += snd-soc-omap-hdmi-card.o diff --git a/sound/soc/omap/omap-hdmi-card.c b/sound/soc/omap/omap-hdmi-card.c deleted file mode 100644 index f649fe8..0000000 --- a/sound/soc/omap/omap-hdmi-card.c +++ /dev/null @@ -1,87 +0,0 @@ -/*
- omap-hdmi-card.c
- OMAP ALSA SoC machine driver for TI OMAP HDMI
- Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- Author: Ricardo Neri ricardo.neri@ti.com
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License
- version 2 as published by the Free Software Foundation.
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- 02110-1301 USA
- */
-#include <linux/module.h> -#include <sound/pcm.h> -#include <sound/soc.h> -#include <asm/mach-types.h> -#include <video/omapdss.h>
-#define DRV_NAME "omap-hdmi-audio"
-static struct snd_soc_dai_link omap_hdmi_dai = {
- .name = "HDMI",
- .stream_name = "HDMI",
- .cpu_dai_name = "omap-hdmi-audio-dai",
- .platform_name = "omap-hdmi-audio-dai",
- .codec_name = "hdmi-audio-codec",
- .codec_dai_name = "hdmi-hifi",
-};
-static struct snd_soc_card snd_soc_omap_hdmi = {
- .name = "OMAPHDMI",
- .owner = THIS_MODULE,
- .dai_link = &omap_hdmi_dai,
- .num_links = 1,
-};
-static int omap_hdmi_probe(struct platform_device *pdev) -{
- struct snd_soc_card *card = &snd_soc_omap_hdmi;
- int ret;
- card->dev = &pdev->dev;
- ret = snd_soc_register_card(card);
- if (ret) {
dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret);
card->dev = NULL;
return ret;
- }
- return 0;
-}
-static int omap_hdmi_remove(struct platform_device *pdev) -{
- struct snd_soc_card *card = platform_get_drvdata(pdev);
- snd_soc_unregister_card(card);
- card->dev = NULL;
- return 0;
-}
-static struct platform_driver omap_hdmi_driver = {
- .driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
- },
- .probe = omap_hdmi_probe,
- .remove = omap_hdmi_remove,
-};
-module_platform_driver(omap_hdmi_driver);
-MODULE_AUTHOR("Ricardo Neri ricardo.neri@ti.com"); -MODULE_DESCRIPTION("OMAP HDMI machine ASoC driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:" DRV_NAME); diff --git a/sound/soc/omap/omap-hdmi.c b/sound/soc/omap/omap-hdmi.c deleted file mode 100644 index eb9c392..0000000 --- a/sound/soc/omap/omap-hdmi.c +++ /dev/null @@ -1,364 +0,0 @@ -/*
- omap-hdmi.c
- OMAP ALSA SoC DAI driver for HDMI audio on OMAP4 processors.
- Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/
- Authors: Jorge Candelaria jorge.candelaria@ti.com
Ricardo Neri <ricardo.neri@ti.com>
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License
- version 2 as published by the Free Software Foundation.
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- 02110-1301 USA
- */
-#include <linux/init.h> -#include <linux/module.h> -#include <linux/device.h> -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/initval.h> -#include <sound/soc.h> -#include <sound/asound.h> -#include <sound/asoundef.h> -#include <sound/dmaengine_pcm.h> -#include <video/omapdss.h> -#include <sound/omap-pcm.h>
-#include "omap-hdmi.h"
-#define DRV_NAME "omap-hdmi-audio-dai"
-struct hdmi_priv {
- struct snd_dmaengine_dai_dma_data dma_data;
- unsigned int dma_req;
- struct omap_dss_audio dss_audio;
- struct snd_aes_iec958 iec;
- struct snd_cea_861_aud_if cea;
- struct omap_dss_device *dssdev;
-};
-static int omap_hdmi_dai_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
-{
- struct hdmi_priv *priv = snd_soc_dai_get_drvdata(dai);
- int err;
- /*
* Make sure that the period bytes are multiple of the DMA packet size.
* Largest packet size we use is 32 32-bit words = 128 bytes
*/
- err = snd_pcm_hw_constraint_step(substream->runtime, 0,
SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 128);
- if (err < 0) {
dev_err(dai->dev, "could not apply constraint\n");
return err;
- }
- if (!priv->dssdev->driver->audio_supported(priv->dssdev)) {
dev_err(dai->dev, "audio not supported\n");
return -ENODEV;
- }
- snd_soc_dai_set_dma_data(dai, substream, &priv->dma_data);
- return 0;
-}
-static int omap_hdmi_dai_prepare(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
-{
- struct hdmi_priv *priv = snd_soc_dai_get_drvdata(dai);
- return priv->dssdev->driver->audio_enable(priv->dssdev);
-}
-static int omap_hdmi_dai_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
-{
- struct hdmi_priv *priv = snd_soc_dai_get_drvdata(dai);
- struct snd_aes_iec958 *iec = &priv->iec;
- struct snd_cea_861_aud_if *cea = &priv->cea;
- int err = 0;
- switch (params_format(params)) {
- case SNDRV_PCM_FORMAT_S16_LE:
priv->dma_data.maxburst = 16;
break;
- case SNDRV_PCM_FORMAT_S24_LE:
priv->dma_data.maxburst = 32;
break;
- default:
dev_err(dai->dev, "format not supported!\n");
return -EINVAL;
- }
- /*
* fill the IEC-60958 channel status word
*/
- /* initialize the word bytes */
- memset(iec->status, 0, sizeof(iec->status));
- /* specify IEC-60958-3 (commercial use) */
- iec->status[0] &= ~IEC958_AES0_PROFESSIONAL;
- /* specify that the audio is LPCM*/
- iec->status[0] &= ~IEC958_AES0_NONAUDIO;
- iec->status[0] |= IEC958_AES0_CON_NOT_COPYRIGHT;
- iec->status[0] |= IEC958_AES0_CON_EMPHASIS_NONE;
- iec->status[0] |= IEC958_AES1_PRO_MODE_NOTID;
- iec->status[1] = IEC958_AES1_CON_GENERAL;
- iec->status[2] |= IEC958_AES2_CON_SOURCE_UNSPEC;
- iec->status[2] |= IEC958_AES2_CON_CHANNEL_UNSPEC;
- switch (params_rate(params)) {
- case 32000:
iec->status[3] |= IEC958_AES3_CON_FS_32000;
break;
- case 44100:
iec->status[3] |= IEC958_AES3_CON_FS_44100;
break;
- case 48000:
iec->status[3] |= IEC958_AES3_CON_FS_48000;
break;
- case 88200:
iec->status[3] |= IEC958_AES3_CON_FS_88200;
break;
- case 96000:
iec->status[3] |= IEC958_AES3_CON_FS_96000;
break;
- case 176400:
iec->status[3] |= IEC958_AES3_CON_FS_176400;
break;
- case 192000:
iec->status[3] |= IEC958_AES3_CON_FS_192000;
break;
- default:
dev_err(dai->dev, "rate not supported!\n");
return -EINVAL;
- }
- /* specify the clock accuracy */
- iec->status[3] |= IEC958_AES3_CON_CLOCK_1000PPM;
- /*
* specify the word length. The same word length value can mean
* two different lengths. Hence, we need to specify the maximum
* word length as well.
*/
- switch (params_format(params)) {
- case SNDRV_PCM_FORMAT_S16_LE:
iec->status[4] |= IEC958_AES4_CON_WORDLEN_20_16;
iec->status[4] &= ~IEC958_AES4_CON_MAX_WORDLEN_24;
break;
- case SNDRV_PCM_FORMAT_S24_LE:
iec->status[4] |= IEC958_AES4_CON_WORDLEN_24_20;
iec->status[4] |= IEC958_AES4_CON_MAX_WORDLEN_24;
break;
- default:
dev_err(dai->dev, "format not supported!\n");
return -EINVAL;
- }
- /*
* Fill the CEA-861 audio infoframe (see spec for details)
*/
- cea->db1_ct_cc = (params_channels(params) - 1)
& CEA861_AUDIO_INFOFRAME_DB1CC;
- cea->db1_ct_cc |= CEA861_AUDIO_INFOFRAME_DB1CT_FROM_STREAM;
- cea->db2_sf_ss = CEA861_AUDIO_INFOFRAME_DB2SF_FROM_STREAM;
- cea->db2_sf_ss |= CEA861_AUDIO_INFOFRAME_DB2SS_FROM_STREAM;
- cea->db3 = 0; /* not used, all zeros */
- /*
* The OMAP HDMI IP requires to use the 8-channel channel code when
* transmitting more than two channels.
*/
- if (params_channels(params) == 2)
cea->db4_ca = 0x0;
- else
cea->db4_ca = 0x13;
- cea->db5_dminh_lsv = CEA861_AUDIO_INFOFRAME_DB5_DM_INH_PROHIBITED;
- /* the expression is trivial but makes clear what we are doing */
- cea->db5_dminh_lsv |= (0 & CEA861_AUDIO_INFOFRAME_DB5_LSV);
- priv->dss_audio.iec = iec;
- priv->dss_audio.cea = cea;
- err = priv->dssdev->driver->audio_config(priv->dssdev,
&priv->dss_audio);
- return err;
-}
-static int omap_hdmi_dai_trigger(struct snd_pcm_substream *substream, int cmd,
struct snd_soc_dai *dai)
-{
- struct hdmi_priv *priv = snd_soc_dai_get_drvdata(dai);
- int err = 0;
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- case SNDRV_PCM_TRIGGER_RESUME:
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
err = priv->dssdev->driver->audio_start(priv->dssdev);
break;
- case SNDRV_PCM_TRIGGER_STOP:
- case SNDRV_PCM_TRIGGER_SUSPEND:
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
priv->dssdev->driver->audio_stop(priv->dssdev);
break;
- default:
err = -EINVAL;
- }
- return err;
-}
-static void omap_hdmi_dai_shutdown(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
-{
- struct hdmi_priv *priv = snd_soc_dai_get_drvdata(dai);
- priv->dssdev->driver->audio_disable(priv->dssdev);
-}
-static const struct snd_soc_dai_ops omap_hdmi_dai_ops = {
- .startup = omap_hdmi_dai_startup,
- .hw_params = omap_hdmi_dai_hw_params,
- .prepare = omap_hdmi_dai_prepare,
- .trigger = omap_hdmi_dai_trigger,
- .shutdown = omap_hdmi_dai_shutdown,
-};
-static struct snd_soc_dai_driver omap_hdmi_dai = {
- .playback = {
.channels_min = 2,
.channels_max = 8,
.rates = OMAP_HDMI_RATES,
.formats = OMAP_HDMI_FORMATS,
- },
- .ops = &omap_hdmi_dai_ops,
-};
-static const struct snd_soc_component_driver omap_hdmi_component = {
- .name = DRV_NAME,
-};
-static int omap_hdmi_probe(struct platform_device *pdev) -{
- int ret;
- struct resource *hdmi_rsrc;
- struct hdmi_priv *hdmi_data;
- bool hdmi_dev_found = false;
- hdmi_data = devm_kzalloc(&pdev->dev, sizeof(*hdmi_data), GFP_KERNEL);
- if (hdmi_data == NULL) {
dev_err(&pdev->dev, "Cannot allocate memory for HDMI data\n");
return -ENOMEM;
- }
- hdmi_rsrc = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!hdmi_rsrc) {
dev_err(&pdev->dev, "Cannot obtain IORESOURCE_MEM HDMI\n");
return -ENODEV;
- }
- hdmi_data->dma_data.addr = hdmi_rsrc->start + OMAP_HDMI_AUDIO_DMA_PORT;
- hdmi_rsrc = platform_get_resource(pdev, IORESOURCE_DMA, 0);
- if (!hdmi_rsrc) {
dev_err(&pdev->dev, "Cannot obtain IORESOURCE_DMA HDMI\n");
return -ENODEV;
- }
- hdmi_data->dma_req = hdmi_rsrc->start;
- hdmi_data->dma_data.filter_data = &hdmi_data->dma_req;
- hdmi_data->dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- /*
* TODO: We assume that there is only one DSS HDMI device. Future
* OMAP implementations may support more than one HDMI devices and
* we should provided separate audio support for all of them.
*/
- /* Find an HDMI device. */
- for_each_dss_dev(hdmi_data->dssdev) {
omap_dss_get_device(hdmi_data->dssdev);
if (!hdmi_data->dssdev->driver) {
omap_dss_put_device(hdmi_data->dssdev);
continue;
}
if (hdmi_data->dssdev->type == OMAP_DISPLAY_TYPE_HDMI) {
hdmi_dev_found = true;
break;
}
- }
- if (!hdmi_dev_found) {
dev_err(&pdev->dev, "no driver for HDMI display found\n");
return -ENODEV;
- }
- dev_set_drvdata(&pdev->dev, hdmi_data);
- ret = snd_soc_register_component(&pdev->dev, &omap_hdmi_component,
&omap_hdmi_dai, 1);
- if (ret)
return ret;
- return omap_pcm_platform_register(&pdev->dev);
-}
-static int omap_hdmi_remove(struct platform_device *pdev) -{
- struct hdmi_priv *hdmi_data = dev_get_drvdata(&pdev->dev);
- snd_soc_unregister_component(&pdev->dev);
- if (hdmi_data == NULL) {
dev_err(&pdev->dev, "cannot obtain HDMi data\n");
return -ENODEV;
- }
- omap_dss_put_device(hdmi_data->dssdev);
- return 0;
-}
-static struct platform_driver hdmi_dai_driver = {
- .driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
- },
- .probe = omap_hdmi_probe,
- .remove = omap_hdmi_remove,
-};
-module_platform_driver(hdmi_dai_driver);
-MODULE_AUTHOR("Jorge Candelaria jorge.candelaria@ti.com"); -MODULE_AUTHOR("Ricardo Neri ricardo.neri@ti.com"); -MODULE_DESCRIPTION("OMAP HDMI SoC Interface"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:" DRV_NAME); diff --git a/sound/soc/omap/omap-hdmi.h b/sound/soc/omap/omap-hdmi.h deleted file mode 100644 index 6ad2bf4..0000000 --- a/sound/soc/omap/omap-hdmi.h +++ /dev/null @@ -1,38 +0,0 @@ -/*
- omap-hdmi.h
- Definitions for OMAP ALSA SoC DAI driver for HDMI audio on OMAP4 processors.
- Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/
- Authors: Jorge Candelaria jorge.candelaria@ti.com
Ricardo Neri <ricardo.neri@ti.com>
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License
- version 2 as published by the Free Software Foundation.
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- 02110-1301 USA
- */
-#ifndef __OMAP_HDMI_H__ -#define __OMAP_HDMI_H__
-#define OMAP_HDMI_AUDIO_DMA_PORT 0x8c
-#define OMAP_HDMI_RATES (SNDRV_PCM_RATE_32000 | \
SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | \
SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 | \
SNDRV_PCM_RATE_176400 | SNDRV_PCM_RATE_192000)
-#define OMAP_HDMI_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \
SNDRV_PCM_FMTBIT_S24_LE)
-#endif