On Fri, Jul 07, 2023 at 02:28:28PM +0200, Gatien CHEVALLIER wrote:
Hello Rob,
On 7/6/23 16:51, Rob Herring wrote:
On Wed, Jul 05, 2023 at 07:27:53PM +0200, Gatien Chevallier wrote:
feature-domains is an optional property that allows a peripheral to refer to one or more feature domain controller(s).
Description of this property is added to all peripheral binding files of the peripheral under the STM32 firewall controllers. It allows an accurate representation of the hardware, where various peripherals are connected to this firewall bus. The firewall can then check the peripheral accesses before allowing it to probe.
Signed-off-by: Gatien Chevallier gatien.chevallier@foss.st.com
Disclaimer: Some error with dtbs_check will be observed as I've considered the property to be generic, as Rob asked
Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml | 4 ++++ Documentation/devicetree/bindings/dma/st,stm32-dma.yaml | 4 ++++ Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml | 4 ++++ Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml | 4 ++++ Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml | 4 ++++ .../devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 4 ++++ Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml | 4 ++++ .../devicetree/bindings/media/cec/st,stm32-cec.yaml | 4 ++++ Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml | 4 ++++ .../bindings/memory-controllers/st,stm32-fmc2-ebi.yaml | 4 ++++ Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml | 4 ++++ Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml | 5 +++++ Documentation/devicetree/bindings/mmc/arm,pl18x.yaml | 4 ++++ Documentation/devicetree/bindings/net/stm32-dwmac.yaml | 4 ++++ Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml | 4 ++++ .../devicetree/bindings/regulator/st,stm32-vrefbuf.yaml | 4 ++++ Documentation/devicetree/bindings/rng/st,stm32-rng.yaml | 4 ++++ Documentation/devicetree/bindings/serial/st,stm32-uart.yaml | 4 ++++ Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml | 4 ++++ Documentation/devicetree/bindings/sound/st,stm32-sai.yaml | 4 ++++ .../devicetree/bindings/sound/st,stm32-spdifrx.yaml | 4 ++++ Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml | 4 ++++ Documentation/devicetree/bindings/spi/st,stm32-spi.yaml | 4 ++++ Documentation/devicetree/bindings/usb/dwc2.yaml | 4 ++++ 24 files changed, 97 insertions(+)
diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml index b767ec72a999..daf8dcaef627 100644 --- a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml +++ b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml @@ -50,6 +50,10 @@ properties: power-domains: maxItems: 1
- feature-domains:
- minItems: 1
- maxItems: 3
What are the 3 entries?
Rob
I thought I was benefiting from the description of the pattern-property in the RIFSC YAML file. But yes anyway, it seems like it needs some description here as the dependency does not appear in this file.
Humm, that should limit the maximum entries to 2, so 3 would never work (if RIFSC is the parent).
I picked 3 as a maxItems for our ST needs, I'll give it some more thought when coming back with something clearer.
I'd expect you have 1 entry for register bus and 1 entry for DMA bus if there is one. It's block specific for how many entries, so the RIFSC schema should not be setting that. You could possibly say that 'feature-domains' is required for all the child nodes though.
Rob