There are two possible audio setups on MSM8916/APQ8016: Normally the audio is routed through the audio/modem DSP (covered by the qdsp6 driver). During upstreaming for the DragonBoard 410c it was decided to bypass it and instead talk directly to the audio controller using the "lpass" driver.
Bypassing the DSP gives more control about the audio configuration but limits the functionality: For example, routing audio through the audio/modem DSP is strictly required for voice call audio. Also, without the special changes in the DB410c firmware other MSM8916 devices can only use the bypass as long as the modem DSP is not started. Otherwise, the firmware will assume control of the LPASS hardware block and audio is no longer functional.
Add support for using the DSP audio setup instead using a new "qcom,msm8916-qdsp6-sndcard" compatible. It is basically a mixture of the apq8016-sbc-sndcard and the newer sm8250-sndcard, which uses indirect QDSP6 DAI links instead of the direct LPASS DAI links.
Cc: Srinivas Kandagatla srinivas.kandagatla@linaro.org Signed-off-by: Stephan Gerhold stephan@gerhold.net --- .../bindings/sound/qcom,sm8250.yaml | 42 +++++++++++++++++++ 1 file changed, 42 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml index 97f13a0a71a9..e50964c54bb9 100644 --- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml @@ -17,6 +17,7 @@ properties: compatible: enum: - qcom,apq8016-sbc-sndcard + - qcom,msm8916-qdsp6-sndcard - qcom,sm8250-sndcard - qcom,qrb5165-rb5-sndcard
@@ -91,6 +92,7 @@ allOf: contains: enum: - qcom,apq8016-sbc-sndcard + - qcom,msm8916-qdsp6-sndcard then: properties: reg: @@ -239,3 +241,43 @@ examples: }; }; }; + + - | + #include <dt-bindings/sound/qcom,q6afe.h> + #include <dt-bindings/sound/qcom,q6asm.h> + sound@7702000 { + compatible = "qcom,msm8916-qdsp6-sndcard"; + reg = <0x07702000 0x4>, <0x07702004 0x4>; + reg-names = "mic-iomux", "spkr-iomux"; + + model = "msm8916"; + audio-routing = + "AMIC1", "MIC BIAS Internal1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS Internal3"; + aux-devs = <&speaker_amp>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cdc_pdm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus>; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + primary-dai-link { + link-name = "Primary MI2S"; + cpu { + sound-dai = <&q6afedai PRIMARY_MI2S_RX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + };