- Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH] SOC/davinci: switch DPRINTK to pr_debug()
by Alexander Beregalov 14 Dec '08

14 Dec '08

Signed-off-by: Alexander Beregalov <a.beregalov(a)gmail.com> --- sound/soc/davinci/davinci-pcm.c | 18 ++++++------------ 1 files changed, 6 insertions(+), 12 deletions(-) diff --git a/sound/soc/davinci/davinci-pcm.c b/sound/soc/davinci/davinci-pcm.c index bc83e1c..74abc9b 100644 --- a/sound/soc/davinci/davinci-pcm.c +++ b/sound/soc/davinci/davinci-pcm.c @@ -14,6 +14,7 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/dma-mapping.h> +#include <linux/kernel.h> #include <sound/core.h> #include <sound/pcm.h> @@ -24,13 +25,6 @@ #include "davinci-pcm.h" -#define DAVINCI_PCM_DEBUG 0 -#if DAVINCI_PCM_DEBUG -#define DPRINTK(x...) printk(KERN_DEBUG x) -#else -#define DPRINTK(x...) -#endif - static struct snd_pcm_hardware davinci_pcm_hardware = { .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | @@ -78,8 +72,8 @@ static void davinci_pcm_enqueue_dma(struct snd_pcm_substream *substream) dma_offset = prtd->period * period_size; dma_pos = runtime->dma_addr + dma_offset; - DPRINTK("audio_set_dma_params_play channel = %d dma_ptr = %x " - "period_size=%x\n", lch, dma_pos, period_size); + pr_debug("davinci_pcm: audio_set_dma_params_play channel = %d " + "dma_ptr = %x period_size=%x\n", lch, dma_pos, period_size); data_type = prtd->params->data_type; count = period_size / data_type; @@ -112,7 +106,7 @@ static void davinci_pcm_dma_irq(int lch, u16 ch_status, void *data) struct snd_pcm_substream *substream = data; struct davinci_runtime_data *prtd = substream->runtime->private_data; - DPRINTK("lch=%d, status=0x%x\n", lch, ch_status); + pr_debug("davinci_pcm: lch=%d, status=0x%x\n", lch, ch_status); if (unlikely(ch_status != DMA_COMPLETE)) return; @@ -316,8 +310,8 @@ static int davinci_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream) buf->area = dma_alloc_writecombine(pcm->card->dev, size, &buf->addr, GFP_KERNEL); - DPRINTK("preallocate_dma_buffer: area=%p, addr=%p, size=%d\n", - (void *) buf->area, (void *) buf->addr, size); + pr_debug("davinci_pcm: preallocate_dma_buffer: area=%p, addr=%p, " + "size=%d\n", (void *) buf->area, (void *) buf->addr, size); if (!buf->area) return -ENOMEM;

2 1

[alsa-devel] Bugs on aspire one A150
by Maxim Levitsky 13 Dec '08

13 Dec '08

I have just bought an Aspire one A150, XP version, as it was the only available here, and installed ubuntu on it. Bugs I discovered so far: ** 1 - embedded controler works in polling mode, due to this: [ 0.708571] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 1.224043] ACPI: EC: missing confirmations, switch off interrupt mode. Maybe this is the reason for the fact that gnome power manager freezes when I unplug the AC, and freezes often when I try to see battery status. (Note: same is seen on my acer aspire 5720) ** 2 - wireless: not to mention the fact that ath5k wasn't installed by default in ubuntu... wireless more or less works, but kernel log is full of backtraces. Was able to connect to my WPA2 access point. Sometimes wireless fails completely, especially after suspend to ram. Advanced features like monitor/injection work, but when I changed the card's mac address it stopped working. I also noticed that if I then start airodump, then wireless works with new mac. ** 3 - internal mic doesn't work. tried model=acer, model=auto. Overall it seems that alsa misprograms O/B realteck codec. I talk about this later. Have same issue on my acer 5720 ** 4 - wireless led doesn't work. ath5k devs, can you fix this? ** 5 - coretemp doesn't show cpu temperature, I have seen somewhere that atom support same thermal diode as core2 and only patch to detect it is needed. Please include such path in 2.6.28 if exists. ** 6 - both card readers are missing from lspci, is this normal? ** 7 - opengl is broken, I tried running neverball in fullscreen, but it shows wrong/corrupted textures (compiz is running, and working well thought) Now I installed 2.6.28-rc3 (actually latest -git) Sadly nothing improved. I only found few regressions: * Wireless now drops connection from my WPA2 access point after few minutes. I changed temporarily its wireless protection to WEP and open mode, and both work fine, maybe this is related to periodic key exchange WPA does? * System doesn't reboot/shutdown, just hangs. Best regards, Maxim Levitsky.

2 5

Re: [alsa-devel] [ath5k-devel] Bugs on aspire one A150
by Maxim Levitsky 13 Dec '08

13 Dec '08

On Sat, 2008-12-13 at 16:08 +0200, Nick Kossifidis wrote: > 2008/12/13 Maxim Levitsky <maximlevitsky(a)gmail.com>: > > > > Hi, > > > > Indeed gpio #3 controls the led. > > I patched ath5k to use it, and led works now fine. > > > > > > Please share your patch with the rest and also post an lspci -vnn for > your card so we can handle this in a generic way This just a one liner hack diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 9d2c597..a447937 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -2595,6 +2595,11 @@ ath5k_init_leds(struct ath5k_softc *sc) sc->led_pin = 1; sc->led_on = 1; /* active high */ } + + __set_bit(ATH_STAT_LEDSOFT, sc->status); + sc->led_pin = 3; + sc->led_on = 1; + if (!test_bit(ATH_STAT_LEDSOFT, sc->status)) goto out; lspci -vnn: 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter [168c:001c] (rev 01) Subsystem: Foxconn International, Inc. Device [105b:e008] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at 55200000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath5k Kernel modules: ath5k Best regards, Maxim Levitsky

1 1

Re: [alsa-devel] [ath5k-devel] Bugs on aspire one A150
by Maxim Levitsky 13 Dec '08

13 Dec '08

On Tue, 2008-11-11 at 00:12 +0200, Nick Kossifidis wrote: > 2008/11/10 Maxim Levitsky <maximlevitsky(a)gmail.com>: > > Bob Copeland wrote: > >> On Fri, Nov 7, 2008 at 10:26 PM, Maxim Levitsky <maximlevitsky(a)gmail.com> wrote: > >>> ** 2 - wireless: not to mention the fact that ath5k wasn't installed by > >>> default in ubuntu... > >>> wireless more or less works, but kernel log is full of backtraces. > >> > >> As you've seen, these should at least be gone now... > >> > >>> Was able to connect to my WPA2 access point. > >>> Sometimes wireless fails completely, especially after suspend to ram. > >> > >> Did you get noise calibration failures in dmesg at this point? Felix posted > >> a patch recently that handles them better. > > Yep, but they seems to be gone in latest -git too. > > Wireless work fine now, it seems like my iwl3945. > > > >> > >>> Advanced features like monitor/injection work, but when I changed the card's > >>> mac address it stopped working. > >>> I also noticed that if I then start airodump, then wireless works with new > >>> mac. > > Why it doesn't accept new mac?, can this be fixed? > > > > > >> > >>> ** 4 - wireless led doesn't work. > >>> ath5k devs, can you fix this? > >> > >> Currently all the LED code we have in there is for setting a particular gpio > >> for particular laptops (and they differ between models). We only have quirks > >> for IBM and HP, none for Acer. Also, the legacy-hal seems to have a different > >> strategy for 2425 chips. I can try to hack up some code for you to test. > >> > > > > I have seen on the web that madwifi did support the led with some gpio settings > > > > sysctl -w dev.wifi0.ledpin=3 > > sysctl -w dev.wifi0.softled=1 > > > > from https://help.ubuntu.com/community/AspireOne > > > > Best regards, > > Maxim Levitsky > > i think that some led settings are stored on EEPROM, let me check it out... Hi, Indeed gpio #3 controls the led. I patched ath5k to use it, and led works now fine. What I dislike is the way led blinks: While nether I like constant rate blinking implemented in windows driver, I don't like the fact that led blinks too fast, sometimes the blink time is so short that led doesn't show full brightness. I think there should be a minimal interval for blinking. Also I don't know what is assumed better, when led is always on, but turns off when active of vise versa? (Due to short intervals, when I set it for first option, it is almost always on, and I almost don't see the interval when it is off) Best regards, Maxim Levitsky

1 0

[alsa-devel] EMU releases 0404/0202 MAC driver stack as open source!!
by Klaus Schulz 12 Dec '08

12 Dec '08

Hi folks. FYI - see below. Does this makes live easier to get the ALSA driver developed. THX Klaus ---Quote--- SCOTTS VALLEY, CA - December 1, 2008 - E-MU Systems today announced that for the first time it will release as open source the Macintosh driver stack for its award winning USB 2.0 audio interface products - the 0202USB, 0404USB, and TrackerPre. The Software Developer Kit will be available on the SourceForge developer's website in early December and can be found at: https://sourceforge.net/projects/zaudiodrivermac/. The software will be released under the GNU Lesser General Public License or LGPL v3, which enables developers to commercially redistribute products derived from this code base. The Software Developer Kit will include the E-MU USB 2.0 driver interface specification and necessary source code for adding new features, enhancing performance, or porting to other Operating Systems. "We are releasing this code to the public to enable programming enthusiasts the ability to experiment with and to extend the capabilities of our products, which we find being used in a variety of applications outside of the MI space proper. I'm convinced that our clever user base will come up with innovative variations not addressed by our mainstream activities," said Michael Lee, marketing manager for E-MU Systems. "I'm excited to see the results generated by the OpenSource community." ---End Quote---

3 4

[alsa-devel] [Question] Can I open a substream in kernel space without attach to a file pointer?
by Bryan Wu 12 Dec '08

12 Dec '08

Hi Takashi, I am developing a USB gadget driver compliant to USB Audio Class Spec 2.0. So I want to open a PCM substream and do some playback of capture, then close them? I found snd_pcm_open_substream() is for opening a substream and attach it to a file. But in my application, there is no need to open a file before opening a substream. - Is there any interface for me to open a substream in kernel space without attach to a file? - How to playback and capture in kernel space, use snd_pcm_lib_write and snd_pcm_lib_read? - How to get the snd_pcm_hardware struct from low level driver, because I have to get the hardware configuration of the snd pcm device? And I am reading the code of OSS emulator in ALSA. It provides some info about the kernel space sound card programming. Thanks a lot -Bryan

2 12

[alsa-devel] Macbook Air 2.1 - No sound on main speakers
by Klaus Schulz 12 Dec '08

12 Dec '08

Hi there. Fowarded from my "Ubuntu manual upgrade thread": Another problem with Realtek. No sound on mainspeakers on MACBOOK Air 2.1. A known issue?? See also the different aplay and codec IDs! Klaus Quote: ----------------------- No sound on main internal speaker. Headphones do work fine. Macbook Air 2,1 Ubuntu Intrepid server Kernel 2.6.27-9 Alsa Driver version 1.0.18a GIT snapshot from 12/4/08 Sound card nVidia MCP79 (device id 10de:0ac0) aplay -l: ALC885 /proc/asound/card0/codec#0 CODEC ALC889a lspci -nv 00:08.0 0403: 10de:0ac0 (rev b1) Subsystem: 10de:cb79 ------------------------

2 1

[alsa-devel] HP Pavillion TX2000z - Headphonejack not working
by Klaus Schulz 12 Dec '08

12 Dec '08

Hi folks. Another problem now with HP and realtek AC861VD. The headphone-jack is not working. Known issue? THX \Klaus QUOTE: -------------------------- drivers 1.0.18a HP Pavillion tx2000z, Realtek AC861VD, Alsa version 1.0.18a. Running Ubuntu Studio Intrepid 8.10 Kernel 2.6.27-9-generic options snd-hda-intel model=hp kqian@kkqian:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 0: ALC861VD Analog [ALC861VD Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 1: ALC861VD Digital [ALC861VD Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 6: Si3054 Modem [Si3054 Modem] Subdevices: 1/1 Subdevice #0: subdevice #0 kqian@kkqian:~$ cat /proc/asound/card0/codec#* | grep Codec Codec: Realtek ALC861-VD Codec: Motorola Si3054 Oh, I should also add, headphones do not show up in volume control. I have checked the switches, as well as the main interface. The only things that are there are: Master, PCM, Front, Front Mic, Front Mic Boost, Microphone, Mic Boost, Speaker, Capture, IEC958, IEC958 Default PCM, Caller ID, Off-hook, Input Source, All of them are checked, and none of them are muted.

3 4

[alsa-devel] More notes on HD-audio driver
by Takashi Iwai 11 Dec '08

11 Dec '08

Hi, per popular demand, I wrote a brief document more about HD-audio driver. It's now found in sound git tree as Documentation/sound/alsa/HD-Audio.txt. The git tree is: git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git You can get the text from web: http://git.kernel.org/?p=linux/kernel/git/tiwai/sound-2.6.git;a=blob_plain;… A PDF file is found at: http://ftp.kernel.org/pub/linux/kernel/people/tiwai/docs/HD-Audio.pdf Comments, corrections and additions are appreciated. thanks, Takashi

5 9

[alsa-devel] [PATCH 0/2] ASoC updates
by Mark Brown 11 Dec '08

11 Dec '08

The following changes since commit 6de45d5d776d2a7e7a9adc8ea49d37fe1bd45fb2: Takashi Iwai (1): ALSA: ASoC - Fix DAI registration in s3c2443-ac97.c are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git for-tiwai Mark Brown (1): ASoC: Fix variable name for Blackfin I2S DAI Stanley.Miao (1): ASoC: TWL4030: hands-free start-up sequence. sound/soc/blackfin/bf5xx-i2s.c | 4 ++-- sound/soc/codecs/twl4030.c | 34 ++++++++++++++++++++++++++++++---- sound/soc/codecs/twl4030.h | 6 ++++++ 3 files changed, 38 insertions(+), 6 deletions(-)

2 3