- Alsa-devel - mailman.alsa-project.org

[PATCH v4 1/2] ASoC: tas2781: Add tas2118, tas2x20, tas5825 support
by Baojun Xu 09 Sep '25

09 Sep '25

Add tas2020, tas2118, tas2120, tas2320, tas2570, tas2572, tas5825 tas5827 support in tas2781 driver. Tas2118, tas2x20, tas257x have no on-chip DSP, tas582x have on-chip DSP but have no calibration required stereo smart amplifier. Signed-off-by: Baojun Xu <baojun.xu(a)ti.com> --- v4: - Change description for adding tas2570, tas2572 and tas5827 - Add tas2570, tas2572, tas5827 in device enumerate - Change the check for reset value, from "== TAS5825" to ">= TAS5825" as TAS5827 was added. - Add tas2570, tas2572, tas5827 in i2c_device_id list - Add tas2570, tas2572, tas5827 in of_device_id list - Change max of device ID from TAS2781 to TAS_OTHERS - Change the check for non-DSP chip, from "< TAS2563" to switch case, as TAS2570 and TAS2572 also have no on-chip DSP - Add TAS5827 in comments for calibration check - Change the check for on-chip DSP, from ">= TAS2563" to switch case, as TAS2570 and TAS2572 also have no on-chip DSP - Add tas2570, tas2572, tas5827 initialyze in codec probe - Add tas2570, tas2572, tas5827 in ACPI device id list v3: - No update. v2: - Update the mail list for maintainers of yaml file --- include/sound/tas2781.h | 14 +- include/sound/tas2x20-tlv.h | 259 ++++++++++++++++++++++++++ sound/soc/codecs/tas2781-comlib-i2c.c | 2 + sound/soc/codecs/tas2781-i2c.c | 184 +++++++++++++----- 4 files changed, 410 insertions(+), 49 deletions(-) create mode 100644 include/sound/tas2x20-tlv.h diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h index f0aefc04a957..ddd997ac3216 100644 --- a/include/sound/tas2781.h +++ b/include/sound/tas2781.h @@ -51,7 +51,9 @@ /* Software Reset, compatble with new device (TAS5825). */ #define TASDEVICE_REG_SWRESET TASDEVICE_REG(0x0, 0x0, 0x01) -#define TASDEVICE_REG_SWRESET_RESET (BIT(0) | BIT(4)) +#define TASDEVICE_REG_SWRESET_RESET BIT(0) + +#define TAS5825_REG_SWRESET_RESET (BIT(0) | BIT(4)) /* Checksum */ #define TASDEVICE_CHECKSUM_REG TASDEVICE_REG(0x0, 0x0, 0x7e) @@ -110,8 +112,17 @@ #define TAS2781_RUNTIME_RE_REG TASDEVICE_REG(0x64, 0x63, 0x44) enum audio_device { + TAS2020, + TAS2118, + TAS2120, + TAS2320, TAS2563, + TAS2570, + TAS2572, TAS2781, + TAS5825, + TAS5827, + TAS_OTHERS, }; enum dspbin_type { @@ -194,6 +205,7 @@ struct tasdevice_priv { unsigned char coef_binaryname[64]; unsigned char rca_binaryname[64]; unsigned char dev_name[32]; + const unsigned char (*dvc_tlv_table)[4]; const char *name_prefix; unsigned char ndev; unsigned int dspbin_typ; diff --git a/include/sound/tas2x20-tlv.h b/include/sound/tas2x20-tlv.h new file mode 100644 index 000000000000..6e6bcec4a0a1 --- /dev/null +++ b/include/sound/tas2x20-tlv.h @@ -0,0 +1,259 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +// +// ALSA SoC Texas Instruments TAS2x20/TAS2118 Audio Smart Amplifier +// +// Copyright (C) 2025 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2x20/TAS2118 hda driver implements for one, two, or even multiple +// TAS2x20/TAS2118 chips. +// +// Author: Baojun Xu <baojun.xu(a)ti.com> +// + +#ifndef __TAS2X20_TLV_H__ +#define __TAS2X20_TLV_H__ + +#define TAS2X20_DVC_LEVEL TASDEVICE_REG(0x0, 0x2, 0x0c) +#define TAS2X20_AMP_LEVEL TASDEVICE_REG(0x0, 0x0, 0x07) + +static const __maybe_unused DECLARE_TLV_DB_SCALE(tas2x20_dvc_tlv, 1650, 50, 0); +static const __maybe_unused DECLARE_TLV_DB_SCALE(tas2x20_amp_tlv, 2100, 50, 0); + +/* pow(10, db/20) * pow(2,22) */ +static const __maybe_unused unsigned char tas2x20_dvc_table[][4] = { + { 0X00, 0X00, 0X0D, 0X00 }, /* -110.0db */ + { 0X00, 0X00, 0X0E, 0X00 }, /* -109.5db */ + { 0X00, 0X00, 0X0E, 0X00 }, /* -109.0db */ + { 0X00, 0X00, 0X0F, 0X00 }, /* -108.5db */ + { 0X00, 0X00, 0X10, 0X00 }, /* -108.0db */ + { 0X00, 0X00, 0X11, 0X00 }, /* -107.5db */ + { 0X00, 0X00, 0X12, 0X00 }, /* -107.0db */ + { 0X00, 0X00, 0X13, 0X00 }, /* -106.5db */ + { 0X00, 0X00, 0X15, 0X00 }, /* -106.0db */ + { 0X00, 0X00, 0X16, 0X00 }, /* -105.5db */ + { 0X00, 0X00, 0X17, 0X00 }, /* -105.0db */ + { 0X00, 0X00, 0X18, 0X00 }, /* -104.5db */ + { 0X00, 0X00, 0X1A, 0X00 }, /* -104.0db */ + { 0X00, 0X00, 0X1C, 0X00 }, /* -103.5db */ + { 0X00, 0X00, 0X1D, 0X00 }, /* -103.0db */ + { 0X00, 0X00, 0X1F, 0X00 }, /* -102.5db */ + { 0X00, 0X00, 0X21, 0X00 }, /* -102.0db */ + { 0X00, 0X00, 0X23, 0X00 }, /* -101.5db */ + { 0X00, 0X00, 0X25, 0X00 }, /* -101.0db */ + { 0X00, 0X00, 0X27, 0X00 }, /* -100.5db */ + { 0X00, 0X00, 0X29, 0X00 }, /* -100.0db */ + { 0X00, 0X00, 0X2C, 0X00 }, /* -99.5db */ + { 0X00, 0X00, 0X2F, 0X00 }, /* -99.0db */ + { 0X00, 0X00, 0X31, 0X00 }, /* -98.5db */ + { 0X00, 0X00, 0X34, 0X00 }, /* -98.0db */ + { 0X00, 0X00, 0X37, 0X00 }, /* -97.5db */ + { 0X00, 0X00, 0X3B, 0X00 }, /* -97.0db */ + { 0X00, 0X00, 0X3E, 0X00 }, /* -96.5db */ + { 0X00, 0X00, 0X42, 0X00 }, /* -96.0db */ + { 0X00, 0X00, 0X46, 0X00 }, /* -95.5db */ + { 0X00, 0X00, 0X4A, 0X00 }, /* -95.0db */ + { 0X00, 0X00, 0X4F, 0X00 }, /* -94.5db */ + { 0X00, 0X00, 0X53, 0X00 }, /* -94.0db */ + { 0X00, 0X00, 0X58, 0X00 }, /* -93.5db */ + { 0X00, 0X00, 0X5D, 0X00 }, /* -93.0db */ + { 0X00, 0X00, 0X63, 0X00 }, /* -92.5db */ + { 0X00, 0X00, 0X69, 0X00 }, /* -92.0db */ + { 0X00, 0X00, 0X6F, 0X00 }, /* -91.5db */ + { 0X00, 0X00, 0X76, 0X00 }, /* -91.0db */ + { 0X00, 0X00, 0X7D, 0X00 }, /* -90.5db */ + { 0X00, 0X00, 0X84, 0X00 }, /* -90.0db */ + { 0X00, 0X00, 0X8C, 0X00 }, /* -89.5db */ + { 0X00, 0X00, 0X94, 0X00 }, /* -89.0db */ + { 0X00, 0X00, 0X9D, 0X00 }, /* -88.5db */ + { 0X00, 0X00, 0XA6, 0X00 }, /* -88.0db */ + { 0X00, 0X00, 0XB0, 0X00 }, /* -87.5db */ + { 0X00, 0X00, 0XBB, 0X00 }, /* -87.0db */ + { 0X00, 0X00, 0XC6, 0X00 }, /* -86.5db */ + { 0X00, 0X00, 0XD2, 0X00 }, /* -86.0db */ + { 0X00, 0X00, 0XDE, 0X00 }, /* -85.5db */ + { 0X00, 0X00, 0XEB, 0X00 }, /* -85.0db */ + { 0X00, 0X00, 0XF9, 0X00 }, /* -84.5db */ + { 0X00, 0X01, 0X08, 0X00 }, /* -84.0db */ + { 0X00, 0X01, 0X18, 0X00 }, /* -83.5db */ + { 0X00, 0X01, 0X28, 0X00 }, /* -83.0db */ + { 0X00, 0X01, 0X3A, 0X00 }, /* -82.5db */ + { 0X00, 0X01, 0X4D, 0X00 }, /* -82.0db */ + { 0X00, 0X01, 0X60, 0X00 }, /* -81.5db */ + { 0X00, 0X01, 0X75, 0X00 }, /* -81.0db */ + { 0X00, 0X01, 0X8B, 0X00 }, /* -80.5db */ + { 0X00, 0X01, 0XA3, 0X00 }, /* -80.0db */ + { 0X00, 0X01, 0XBC, 0X00 }, /* -79.5db */ + { 0X00, 0X01, 0XD6, 0X00 }, /* -79.0db */ + { 0X00, 0X01, 0XF2, 0X00 }, /* -78.5db */ + { 0X00, 0X02, 0X10, 0X00 }, /* -78.0db */ + { 0X00, 0X02, 0X2F, 0X00 }, /* -77.5db */ + { 0X00, 0X02, 0X50, 0X00 }, /* -77.0db */ + { 0X00, 0X02, 0X73, 0X00 }, /* -76.5db */ + { 0X00, 0X02, 0X98, 0X00 }, /* -76.0db */ + { 0X00, 0X02, 0XC0, 0X00 }, /* -75.5db */ + { 0X00, 0X02, 0XE9, 0X00 }, /* -75.0db */ + { 0X00, 0X03, 0X16, 0X00 }, /* -74.5db */ + { 0X00, 0X03, 0X44, 0X00 }, /* -74.0db */ + { 0X00, 0X03, 0X76, 0X00 }, /* -73.5db */ + { 0X00, 0X03, 0XAA, 0X00 }, /* -73.0db */ + { 0X00, 0X03, 0XE2, 0X00 }, /* -72.5db */ + { 0X00, 0X04, 0X1D, 0X00 }, /* -72.0db */ + { 0X00, 0X04, 0X5B, 0X00 }, /* -71.5db */ + { 0X00, 0X04, 0X9E, 0X00 }, /* -71.0db */ + { 0X00, 0X04, 0XE4, 0X00 }, /* -70.5db */ + { 0X00, 0X05, 0X2E, 0X00 }, /* -70.0db */ + { 0X00, 0X05, 0X7C, 0X00 }, /* -69.5db */ + { 0X00, 0X05, 0XD0, 0X00 }, /* -69.0db */ + { 0X00, 0X06, 0X28, 0X00 }, /* -68.5db */ + { 0X00, 0X06, 0X85, 0X00 }, /* -68.0db */ + { 0X00, 0X06, 0XE8, 0X00 }, /* -67.5db */ + { 0X00, 0X07, 0X51, 0X00 }, /* -67.0db */ + { 0X00, 0X07, 0XC0, 0X00 }, /* -66.5db */ + { 0X00, 0X08, 0X36, 0X00 }, /* -66.0db */ + { 0X00, 0X08, 0XB2, 0X00 }, /* -65.5db */ + { 0X00, 0X09, 0X36, 0X00 }, /* -65.0db */ + { 0X00, 0X09, 0XC2, 0X00 }, /* -64.5db */ + { 0X00, 0X0A, 0X56, 0X00 }, /* -64.0db */ + { 0X00, 0X0A, 0XF3, 0X00 }, /* -63.5db */ + { 0X00, 0X0B, 0X99, 0X00 }, /* -63.0db */ + { 0X00, 0X0C, 0X49, 0X00 }, /* -62.5db */ + { 0X00, 0X0D, 0X03, 0X00 }, /* -62.0db */ + { 0X00, 0X0D, 0XC9, 0X00 }, /* -61.5db */ + { 0X00, 0X0E, 0X9A, 0X00 }, /* -61.0db */ + { 0X00, 0X0F, 0X77, 0X00 }, /* -60.5db */ + { 0X00, 0X10, 0X62, 0X00 }, /* -60.0db */ + { 0X00, 0X11, 0X5A, 0X00 }, /* -59.5db */ + { 0X00, 0X12, 0X62, 0X00 }, /* -59.0db */ + { 0X00, 0X13, 0X78, 0X00 }, /* -58.5db */ + { 0X00, 0X14, 0XA0, 0X00 }, /* -58.0db */ + { 0X00, 0X15, 0XD9, 0X00 }, /* -57.5db */ + { 0X00, 0X17, 0X24, 0X00 }, /* -57.0db */ + { 0X00, 0X18, 0X83, 0X00 }, /* -56.5db */ + { 0X00, 0X19, 0XF7, 0X00 }, /* -56.0db */ + { 0X00, 0X1B, 0X81, 0X00 }, /* -55.5db */ + { 0X00, 0X1D, 0X22, 0X00 }, /* -55.0db */ + { 0X00, 0X1E, 0XDC, 0X00 }, /* -54.5db */ + { 0X00, 0X20, 0XB0, 0X00 }, /* -54.0db */ + { 0X00, 0X22, 0XA0, 0X00 }, /* -53.5db */ + { 0X00, 0X24, 0XAD, 0X00 }, /* -53.0db */ + { 0X00, 0X26, 0XDA, 0X00 }, /* -52.5db */ + { 0X00, 0X29, 0X27, 0X00 }, /* -52.0db */ + { 0X00, 0X2B, 0X97, 0X00 }, /* -51.5db */ + { 0X00, 0X2E, 0X2D, 0X00 }, /* -51.0db */ + { 0X00, 0X30, 0XE9, 0X00 }, /* -50.5db */ + { 0X00, 0X33, 0XCF, 0X00 }, /* -50.0db */ + { 0X00, 0X36, 0XE1, 0X00 }, /* -49.5db */ + { 0X00, 0X3A, 0X21, 0X00 }, /* -49.0db */ + { 0X00, 0X3D, 0X93, 0X00 }, /* -48.5db */ + { 0X00, 0X41, 0X39, 0X00 }, /* -48.0db */ + { 0X00, 0X45, 0X17, 0X00 }, /* -47.5db */ + { 0X00, 0X49, 0X2F, 0X00 }, /* -47.0db */ + { 0X00, 0X4D, 0X85, 0X00 }, /* -46.5db */ + { 0X00, 0X52, 0X1D, 0X00 }, /* -46.0db */ + { 0X00, 0X56, 0XFA, 0X00 }, /* -45.5db */ + { 0X00, 0X5C, 0X22, 0X00 }, /* -45.0db */ + { 0X00, 0X61, 0X97, 0X00 }, /* -44.5db */ + { 0X00, 0X67, 0X60, 0X00 }, /* -44.0db */ + { 0X00, 0X6D, 0X80, 0X00 }, /* -43.5db */ + { 0X00, 0X73, 0XFD, 0X00 }, /* -43.0db */ + { 0X00, 0X7A, 0XDC, 0X00 }, /* -42.5db */ + { 0X00, 0X82, 0X24, 0X00 }, /* -42.0db */ + { 0X00, 0X89, 0XDA, 0X00 }, /* -41.5db */ + { 0X00, 0X92, 0X05, 0X00 }, /* -41.0db */ + { 0X00, 0X9A, 0XAC, 0X00 }, /* -40.5db */ + { 0X00, 0XA3, 0XD7, 0X00 }, /* -40.0db */ + { 0X00, 0XAD, 0X8C, 0X00 }, /* -39.5db */ + { 0X00, 0XB7, 0XD4, 0X00 }, /* -39.0db */ + { 0X00, 0XC2, 0XB9, 0X00 }, /* -38.5db */ + { 0X00, 0XCE, 0X43, 0X00 }, /* -38.0db */ + { 0X00, 0XDA, 0X7B, 0X00 }, /* -37.5db */ + { 0X00, 0XE7, 0X6E, 0X00 }, /* -37.0db */ + { 0X00, 0XF5, 0X24, 0X00 }, /* -36.5db */ + { 0X01, 0X03, 0XAB, 0X00 }, /* -36.0db */ + { 0X01, 0X13, 0X0E, 0X00 }, /* -35.5db */ + { 0X01, 0X23, 0X5A, 0X00 }, /* -35.0db */ + { 0X01, 0X34, 0X9D, 0X00 }, /* -34.5db */ + { 0X01, 0X46, 0XE7, 0X00 }, /* -34.0db */ + { 0X01, 0X5A, 0X46, 0X00 }, /* -33.5db */ + { 0X01, 0X6E, 0XCA, 0X00 }, /* -33.0db */ + { 0X01, 0X84, 0X86, 0X00 }, /* -32.5db */ + { 0X01, 0X9B, 0X8C, 0X00 }, /* -32.0db */ + { 0X01, 0XB3, 0XEE, 0X00 }, /* -31.5db */ + { 0X01, 0XCD, 0XC3, 0X00 }, /* -31.0db */ + { 0X01, 0XE9, 0X20, 0X00 }, /* -30.5db */ + { 0X02, 0X06, 0X1B, 0X00 }, /* -30.0db */ + { 0X02, 0X24, 0XCE, 0X00 }, /* -29.5db */ + { 0X02, 0X45, 0X53, 0X00 }, /* -29.0db */ + { 0X02, 0X67, 0XC5, 0X00 }, /* -28.5db */ + { 0X02, 0X8C, 0X42, 0X00 }, /* -28.0db */ + { 0X02, 0XB2, 0XE8, 0X00 }, /* -27.5db */ + { 0X02, 0XDB, 0XD8, 0X00 }, /* -27.0db */ + { 0X03, 0X07, 0X36, 0X00 }, /* -26.5db */ + { 0X03, 0X35, 0X25, 0X00 }, /* -26.0db */ + { 0X03, 0X65, 0XCD, 0X00 }, /* -25.5db */ + { 0X03, 0X99, 0X57, 0X00 }, /* -25.0db */ + { 0X03, 0XCF, 0XEE, 0X00 }, /* -24.5db */ + { 0X04, 0X09, 0XC2, 0X00 }, /* -24.0db */ + { 0X04, 0X47, 0X03, 0X00 }, /* -23.5db */ + { 0X04, 0X87, 0XE5, 0X00 }, /* -23.0db */ + { 0X04, 0XCC, 0XA0, 0X00 }, /* -22.5db */ + { 0X05, 0X15, 0X6D, 0X00 }, /* -22.0db */ + { 0X05, 0X62, 0X8A, 0X00 }, /* -21.5db */ + { 0X05, 0XB4, 0X39, 0X00 }, /* -21.0db */ + { 0X06, 0X0A, 0XBF, 0X00 }, /* -20.5db */ + { 0X06, 0X66, 0X66, 0X00 }, /* -20.0db */ + { 0X06, 0XC7, 0X7B, 0X00 }, /* -19.5db */ + { 0X07, 0X2E, 0X50, 0X00 }, /* -19.0db */ + { 0X07, 0X9B, 0X3D, 0X00 }, /* -18.5db */ + { 0X08, 0X0E, 0X9F, 0X00 }, /* -18.0db */ + { 0X08, 0X88, 0XD7, 0X00 }, /* -17.5db */ + { 0X09, 0X0A, 0X4D, 0X00 }, /* -17.0db */ + { 0X09, 0X93, 0X6E, 0X00 }, /* -16.5db */ + { 0X0A, 0X24, 0XB0, 0X00 }, /* -16.0db */ + { 0X0A, 0XBE, 0X8D, 0X00 }, /* -15.5db */ + { 0X0B, 0X61, 0X88, 0X00 }, /* -15.0db */ + { 0X0C, 0X0E, 0X2B, 0X00 }, /* -14.5db */ + { 0X0C, 0XC5, 0X09, 0X00 }, /* -14.0db */ + { 0X0D, 0X86, 0XBD, 0X00 }, /* -13.5db */ + { 0X0E, 0X53, 0XEB, 0X00 }, /* -13.0db */ + { 0X0F, 0X2D, 0X42, 0X00 }, /* -12.5db */ + { 0X10, 0X13, 0X79, 0X00 }, /* -12.0db */ + { 0X11, 0X07, 0X54, 0X00 }, /* -11.5db */ + { 0X12, 0X09, 0XA3, 0X00 }, /* -11.0db */ + { 0X13, 0X1B, 0X40, 0X00 }, /* -10.5db */ + { 0X14, 0X3D, 0X13, 0X00 }, /* -10.0db */ + { 0X15, 0X70, 0X12, 0X00 }, /* -9.5db */ + { 0X16, 0XB5, 0X43, 0X00 }, /* -9.0db */ + { 0X18, 0X0D, 0XB8, 0X00 }, /* -8.5db */ + { 0X19, 0X7A, 0X96, 0X00 }, /* -8.0db */ + { 0X1A, 0XFD, 0X13, 0X00 }, /* -7.5db */ + { 0X1C, 0X96, 0X76, 0X00 }, /* -7.0db */ + { 0X1E, 0X48, 0X1C, 0X00 }, /* -6.5db */ + { 0X20, 0X13, 0X73, 0X00 }, /* -6.0db */ + { 0X21, 0XFA, 0X02, 0X00 }, /* -5.5db */ + { 0X23, 0XFD, 0X66, 0X00 }, /* -5.0db */ + { 0X26, 0X1F, 0X54, 0X00 }, /* -4.5db */ + { 0X28, 0X61, 0X9A, 0X00 }, /* -4.0db */ + { 0X2A, 0XC6, 0X25, 0X00 }, /* -3.5db */ + { 0X2D, 0X4E, 0XFB, 0X00 }, /* -3.0db */ + { 0X2F, 0XFE, 0X44, 0X00 }, /* -2.5db */ + { 0X32, 0XD6, 0X46, 0X00 }, /* -2.0db */ + { 0X35, 0XD9, 0X6B, 0X00 }, /* -1.5db */ + { 0X39, 0X0A, 0X41, 0X00 }, /* -1.0db */ + { 0X3C, 0X6B, 0X7E, 0X00 }, /* -0.5db */ + { 0X40, 0X00, 0X00, 0X00 }, /* 0.0db */ + { 0X43, 0XCA, 0XD0, 0X00 }, /* 0.5db */ + { 0X47, 0XCF, 0X26, 0X00 }, /* 1.0db */ + { 0X4C, 0X10, 0X6B, 0X00 }, /* 1.5db */ + { 0X50, 0X92, 0X3B, 0X00 }, /* 2.0db */ + { 0X55, 0X58, 0X6A, 0X00 }, /* 2.5db */ + { 0X5A, 0X67, 0X03, 0X00 }, /* 3.0db */ + { 0X5F, 0XC2, 0X53, 0X00 }, /* 3.5db */ + { 0X65, 0X6E, 0XE3, 0X00 }, /* 4.0db */ + { 0X6B, 0X71, 0X86, 0X00 }, /* 4.5db */ + { 0X71, 0XCF, 0X54, 0X00 }, /* 5.0db */ + { 0X78, 0X8D, 0XB4, 0X00 }, /* 5.5db */ + { 0X7F, 0XB2, 0X61, 0X00 }, /* 6.0db */ +}; +#endif diff --git a/sound/soc/codecs/tas2781-comlib-i2c.c b/sound/soc/codecs/tas2781-comlib-i2c.c index c078bb0a8437..b3fd7350143b 100644 --- a/sound/soc/codecs/tas2781-comlib-i2c.c +++ b/sound/soc/codecs/tas2781-comlib-i2c.c @@ -320,6 +320,8 @@ void tasdevice_reset(struct tasdevice_priv *tas_dev) for (i = 0; i < tas_dev->ndev; i++) { ret = tasdevice_dev_write(tas_dev, i, TASDEVICE_REG_SWRESET, + tas_dev->chip_id >= TAS5825 ? + TAS5825_REG_SWRESET_RESET : TASDEVICE_REG_SWRESET_RESET); if (ret < 0) dev_err(tas_dev->dev, diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index ea3cdb8553de..1539b70881d1 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -30,8 +30,10 @@ #include <sound/tas2781.h> #include <sound/tas2781-comlib-i2c.h> #include <sound/tlv.h> +#include <sound/tas2x20-tlv.h> #include <sound/tas2563-tlv.h> #include <sound/tas2781-tlv.h> +#include <sound/tas5825-tlv.h> #include <linux/unaligned.h> #define X2563_CL_STT_VAL(xreg, xval) \ @@ -98,16 +100,32 @@ static const struct bulk_reg_val tas2781_cali_start_reg[] = { }; static const struct i2c_device_id tasdevice_id[] = { + { "tas2020", TAS2020 }, + { "tas2118", TAS2118 }, + { "tas2120", TAS2120 }, + { "tas2320", TAS2320 }, { "tas2563", TAS2563 }, + { "tas2570", TAS2570 }, + { "tas2572", TAS2572 }, { "tas2781", TAS2781 }, + { "tas5825", TAS5825 }, + { "tas5827", TAS5827 }, {} }; MODULE_DEVICE_TABLE(i2c, tasdevice_id); #ifdef CONFIG_OF static const struct of_device_id tasdevice_of_match[] = { + { .compatible = "ti,tas2020" }, + { .compatible = "ti,tas2118" }, + { .compatible = "ti,tas2120" }, + { .compatible = "ti,tas2320" }, { .compatible = "ti,tas2563" }, + { .compatible = "ti,tas2570" }, + { .compatible = "ti,tas2572" }, { .compatible = "ti,tas2781" }, + { .compatible = "ti,tas5825" }, + { .compatible = "ti,tas5827" }, {}, }; MODULE_DEVICE_TABLE(of, tasdevice_of_match); @@ -797,7 +815,7 @@ static int tasdev_nop_get( return 0; } -static int tas2563_digital_gain_get( +static int tasdevice_digital_gain_get( struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { @@ -823,15 +841,15 @@ static int tas2563_digital_gain_get( while (r > 1 + l) { mid = (l + r) / 2; - ar_mid = get_unaligned_be32(tas2563_dvc_table[mid]); + ar_mid = get_unaligned_be32(tas_dev->dvc_tlv_table[mid]); if (target < ar_mid) r = mid; else l = mid; } - ar_l = get_unaligned_be32(tas2563_dvc_table[l]); - ar_r = get_unaligned_be32(tas2563_dvc_table[r]); + ar_l = get_unaligned_be32(tas_dev->dvc_tlv_table[l]); + ar_r = get_unaligned_be32(tas_dev->dvc_tlv_table[r]); /* find out the member same as or closer to the current volume */ ucontrol->value.integer.value[0] = @@ -841,7 +859,7 @@ static int tas2563_digital_gain_get( return 0; } -static int tas2563_digital_gain_put( +static int tasdevice_digital_gain_put( struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { @@ -867,7 +885,7 @@ static int tas2563_digital_gain_put( } volrd = get_unaligned_be32(&data[0]); - volwr = get_unaligned_be32(tas2563_dvc_table[vol]); + volwr = get_unaligned_be32(tas_dev->dvc_tlv_table[vol]); if (volrd == volwr) { rc = 0; @@ -876,7 +894,7 @@ static int tas2563_digital_gain_put( for (i = 0; i < tas_dev->ndev; i++) { ret = tasdevice_dev_bulk_write(tas_dev, i, reg, - (unsigned char *)tas2563_dvc_table[vol], 4); + (unsigned char *)tas_dev->dvc_tlv_table[vol], 4); if (ret) { dev_err(tas_dev->dev, "%s, set digital vol error in dev %d\n", @@ -892,11 +910,6 @@ static int tas2563_digital_gain_put( return rc; } -static const struct snd_kcontrol_new tasdevice_snd_controls[] = { - SOC_SINGLE_BOOL_EXT("Speaker Force Firmware Load", 0, - tasdev_force_fwload_get, tasdev_force_fwload_put), -}; - static const struct snd_kcontrol_new tasdevice_cali_controls[] = { SOC_SINGLE_EXT("Calibration Stop", SND_SOC_NOPM, 0, 1, 0, tasdev_nop_get, tasdev_calib_stop_put), @@ -907,6 +920,16 @@ static const struct snd_kcontrol_new tasdevice_cali_controls[] = { SND_SOC_BYTES_EXT("Amp XMA2 Data", 6, tasdev_XMA2_data_get, NULL), }; +static const struct snd_kcontrol_new tas2x20_snd_controls[] = { + SOC_SINGLE_RANGE_EXT_TLV("Speaker Analog Volume", TAS2X20_AMP_LEVEL, + 0, 0, 42, 1, tas2781_amp_getvol, + tas2781_amp_putvol, tas2x20_amp_tlv), + SOC_SINGLE_RANGE_EXT_TLV("Speaker Digital Volume", TAS2X20_DVC_LEVEL, + 0, 0, ARRAY_SIZE(tas2x20_dvc_table) - 1, 0, + tasdevice_digital_gain_get, tasdevice_digital_gain_put, + tas2x20_dvc_tlv), +}; + static const struct snd_kcontrol_new tas2781_snd_controls[] = { SOC_SINGLE_RANGE_EXT_TLV("Speaker Analog Volume", TAS2781_AMP_LEVEL, 1, 0, 20, 0, tas2781_amp_getvol, @@ -916,6 +939,15 @@ static const struct snd_kcontrol_new tas2781_snd_controls[] = { tas2781_digital_putvol, tas2781_dvc_tlv), }; +static const struct snd_kcontrol_new tas5825_snd_controls[] = { + SOC_SINGLE_RANGE_EXT_TLV("Speaker Analog Volume", TAS5825_AMP_LEVEL, + 0, 0, 31, 1, tas2781_amp_getvol, + tas2781_amp_putvol, tas5825_amp_tlv), + SOC_SINGLE_RANGE_EXT_TLV("Speaker Digital Volume", TAS5825_DVC_LEVEL, + 0, 0, 254, 1, tas2781_amp_getvol, + tas2781_amp_putvol, tas5825_dvc_tlv), +}; + static const struct snd_kcontrol_new tas2781_cali_controls[] = { SND_SOC_BYTES_EXT("Amp Latch Data", 3, tas2781_latch_reg_get, NULL), }; @@ -923,7 +955,7 @@ static const struct snd_kcontrol_new tas2781_cali_controls[] = { static const struct snd_kcontrol_new tas2563_snd_controls[] = { SOC_SINGLE_RANGE_EXT_TLV("Speaker Digital Volume", TAS2563_DVC_LVL, 0, 0, ARRAY_SIZE(tas2563_dvc_table) - 1, 0, - tas2563_digital_gain_get, tas2563_digital_gain_put, + tasdevice_digital_gain_get, tasdevice_digital_gain_put, tas2563_dvc_tlv), }; @@ -968,8 +1000,8 @@ static int tasdevice_info_chip_id(struct snd_kcontrol *kcontrol, { uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; uinfo->count = 1; - uinfo->value.integer.min = TAS2563; - uinfo->value.integer.max = TAS2781; + uinfo->value.integer.min = TAS2020; + uinfo->value.integer.max = TAS_OTHERS; return 0; } @@ -1168,9 +1200,9 @@ static int tasdevice_active_num_put(struct snd_kcontrol *kcontrol, static int tasdevice_dsp_create_ctrls(struct tasdevice_priv *tas_priv) { struct snd_kcontrol_new *dsp_ctrls; - char *active_dev_num, *chip_id; + char *active_dev_num, *chip_id, *fw_load; char *conf_name, *prog_name; - int nr_controls = 4; + int nr_controls = 5; int mix_index = 0; /* Alloc kcontrol via devm_kzalloc, which don't manually @@ -1228,6 +1260,19 @@ static int tasdevice_dsp_create_ctrls(struct tasdevice_priv *tas_priv) dsp_ctrls[mix_index].get = tasdevice_get_chip_id; mix_index++; + fw_load = devm_kstrdup(tas_priv->dev, "Speaker Force Firmware Load", + GFP_KERNEL); + if (!fw_load) + return -ENOMEM; + + dsp_ctrls[mix_index].name = fw_load; + dsp_ctrls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER; + dsp_ctrls[mix_index].info = snd_soc_info_bool_ext; + dsp_ctrls[mix_index].put = tasdev_force_fwload_put; + dsp_ctrls[mix_index].get = tasdev_force_fwload_get; + dsp_ctrls[mix_index].private_value = 0UL; + mix_index++; + return snd_soc_add_component_controls(tas_priv->codec, dsp_ctrls, nr_controls < mix_index ? nr_controls : mix_index); } @@ -1587,6 +1632,16 @@ static void tasdevice_fw_ready(const struct firmware *fmw, * failing to load DSP firmware is NOT an error. */ tas_priv->fw_state = TASDEVICE_RCA_FW_OK; + /* There is no DSP firmware required for TAS2118/2X20/257X. */ + switch (tas_priv->chip_id) { + case TAS2020: + case TAS2118: + case TAS2120: + case TAS2320: + case TAS2570: + case TAS2572: + goto out; + } if (tas_priv->name_prefix) scnprintf(tas_priv->coef_binaryname, 64, "%s-%s_coef.bin", tas_priv->name_prefix, tas_priv->dev_name); @@ -1608,34 +1663,37 @@ static void tasdevice_fw_ready(const struct firmware *fmw, dev_err(tas_priv->dev, "dsp controls error\n"); goto out; } - - ret = tasdevice_create_cali_ctrls(tas_priv); - if (ret) { - dev_err(tas_priv->dev, "cali controls error\n"); - goto out; - } - tas_priv->fw_state = TASDEVICE_DSP_FW_ALL_OK; - /* If calibrated data occurs error, dsp will still works with default - * calibrated data inside algo. - */ - for (i = 0; i < tas_priv->ndev; i++) { - if (tas_priv->name_prefix) - scnprintf(tas_priv->cal_binaryname[i], 64, - "%s-%s_cal_0x%02x.bin", tas_priv->name_prefix, - tas_priv->dev_name, - tas_priv->tasdevice[i].dev_addr); - else - scnprintf(tas_priv->cal_binaryname[i], 64, - "%s_cal_0x%02x.bin", tas_priv->dev_name, - tas_priv->tasdevice[i].dev_addr); - ret = tas2781_load_calibration(tas_priv, - tas_priv->cal_binaryname[i], i); - if (ret != 0) - dev_err(tas_priv->dev, - "%s: load %s error, default will effect\n", - __func__, tas_priv->cal_binaryname[i]); + /* There is no calibration required for TAS5825/TAS5827. */ + if (tas_priv->chip_id < TAS5825) { + ret = tasdevice_create_cali_ctrls(tas_priv); + if (ret) { + dev_err(tas_priv->dev, "cali controls error\n"); + goto out; + } + /* If calibrated data occurs error, dsp will still works + * with default calibrated data inside algo. + */ + for (i = 0; i < tas_priv->ndev; i++) { + if (tas_priv->name_prefix) + scnprintf(tas_priv->cal_binaryname[i], 64, + "%s-%s_cal_0x%02x.bin", + tas_priv->name_prefix, + tas_priv->dev_name, + tas_priv->tasdevice[i].dev_addr); + else + scnprintf(tas_priv->cal_binaryname[i], 64, + "%s_cal_0x%02x.bin", + tas_priv->dev_name, + tas_priv->tasdevice[i].dev_addr); + ret = tas2781_load_calibration(tas_priv, + tas_priv->cal_binaryname[i], i); + if (ret != 0) + dev_err(tas_priv->dev, + "%s: load %s error, keep default.\n", + __func__, tas_priv->cal_binaryname[i]); + } } tasdevice_prmg_load(tas_priv, 0); @@ -1659,8 +1717,14 @@ static void tasdevice_fw_ready(const struct firmware *fmw, #endif out: if (tas_priv->fw_state == TASDEVICE_RCA_FW_OK) { - /* If DSP FW fail, DSP kcontrol won't be created. */ - tasdevice_dsp_remove(tas_priv); + switch (tas_priv->chip_id) { + case TAS2563: + case TAS2781: + case TAS5825: + case TAS5827: + /* If DSP FW fail, DSP kcontrol won't be created. */ + tasdevice_dsp_remove(tas_priv); + } } mutex_unlock(&tas_priv->codec_lock); release_firmware(fmw); @@ -1804,13 +1868,30 @@ static int tasdevice_codec_probe(struct snd_soc_component *codec) int rc; switch (tas_priv->chip_id) { + case TAS2020: + case TAS2118: + case TAS2120: + case TAS2320: + case TAS2570: + case TAS2572: + p = (struct snd_kcontrol_new *)tas2x20_snd_controls; + size = ARRAY_SIZE(tas2x20_snd_controls); + tas_priv->dvc_tlv_table = tas2x20_dvc_table; + break; case TAS2781: p = (struct snd_kcontrol_new *)tas2781_snd_controls; size = ARRAY_SIZE(tas2781_snd_controls); break; + case TAS5825: + case TAS5827: + p = (struct snd_kcontrol_new *)tas5825_snd_controls; + size = ARRAY_SIZE(tas5825_snd_controls); + break; default: p = (struct snd_kcontrol_new *)tas2563_snd_controls; size = ARRAY_SIZE(tas2563_snd_controls); + tas_priv->dvc_tlv_table = tas2563_dvc_table; + break; } rc = snd_soc_add_component_controls(codec, p, size); @@ -1850,8 +1931,6 @@ static const struct snd_soc_component_driver soc_codec_driver_tasdevice = { .probe = tasdevice_codec_probe, .remove = tasdevice_codec_remove, - .controls = tasdevice_snd_controls, - .num_controls = ARRAY_SIZE(tasdevice_snd_controls), .dapm_widgets = tasdevice_dapm_widgets, .num_dapm_widgets = ARRAY_SIZE(tasdevice_dapm_widgets), .dapm_routes = tasdevice_audio_map, @@ -1967,7 +2046,16 @@ static void tasdevice_i2c_remove(struct i2c_client *client) #ifdef CONFIG_ACPI static const struct acpi_device_id tasdevice_acpi_match[] = { - { "TAS2781", TAS2781 }, + { "TXNW2020", TAS2020 }, + { "TXNW2118", TAS2118 }, + { "TXNW2120", TAS2120 }, + { "TXNW2320", TAS2320 }, + { "TXNW2563", TAS2563 }, + { "TXNW2570", TAS2570 }, + { "TXNW2572", TAS2572 }, + { "TXNW2781", TAS2781 }, + { "TXNW5825", TAS5825 }, + { "TXNW5827", TAS5827 }, {}, }; -- 2.43.0

4 6

ASRock X870 Riptide: extremely low mic capture volume
by GitHub issues - opened 09 Sep '25

09 Sep '25

alsa-project/alsa-ucm-conf issue #611 was opened from jktomer: I'm running with an ASRock X870 Riptide Wifi, which seems to use the same ALC4082 as other ASRock socket AM5 boards: ``` :) 18:00 viola:jkt[3828]alsa% lsusb | grep audio Bus 001 Device 008: ID 26ce:0a08 Generic USB Audio ``` Playback on this device seems to work and the various ports are recognized apparently correctly, but capture from both the front microphone and rear line-input ports is excessively low volume even with the mixer turned up as high as it goes. (The card does still show in `/proc/asound/cards` as "Generic USB Audio", but editing the relevant section in `ALC4080-HiFi.conf` seems to influence the output of `alsaucm -c hw:1 dump text`, so I'm assuming the recognition part works correctly.) Output of `alsa-info.sh` and `alsaucm -c hw:1 dump text` attached. [alsa-info.txt](https://github.com/user-attachments/files/22223994/alsa-info… [alsaucm.txt](https://github.com/user-attachments/files/22223995/alsaucm.txt) Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/611 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

UCM2: Intel: sof-hda-dsp: HiFi: IPC3 mono DMIC is exposed as stereo PCM
by GitHub pull_request - opened 08 Sep '25

08 Sep '25

alsa-project/alsa-ucm-conf pull request #610 was opened from ujfalusi: With IPC3 the DMIC PCM is stereo even in case of a single (mono) DMIC connection. Make the `CaptureChannels 1` conditional to IPC4 only. Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2393552 Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2384324 Closes: https://github.com/thesofproject/linux/issues/5528 Fixes: 56cbdfd04339 ("UCM2: Intel: sof-hda-dsp: HiFi: Fix handling of mono DMICs") Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/610 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/610.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH v4] ALSA: hda/tas2781: Fix the order of TAS2781 calibrated-data
by Shenghao Ding 08 Sep '25

08 Sep '25

A bug reported by one of my customers that the order of TAS2781 calibrated-data is incorrect, the correct way is to move R0_Low and insert it between R0 and InvR0. Fixes: 4fe238513407 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib") Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v4: - Add missing base into cali_cnv(). v3: - Take Tiwai's advice on cali_cnv() to make it more simpler. v2: - Submit to the sound branch maintained by Tiwai instead of linux-next branch - Drop other fix --- sound/hda/codecs/side-codecs/tas2781_hda.c | 25 +++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-) diff --git a/sound/hda/codecs/side-codecs/tas2781_hda.c b/sound/hda/codecs/side-codecs/tas2781_hda.c index f46d2e06c64f..536940c78f00 100644 --- a/sound/hda/codecs/side-codecs/tas2781_hda.c +++ b/sound/hda/codecs/side-codecs/tas2781_hda.c @@ -33,6 +33,23 @@ const efi_guid_t tasdev_fct_efi_guid[] = { }; EXPORT_SYMBOL_NS_GPL(tasdev_fct_efi_guid, "SND_HDA_SCODEC_TAS2781"); +/* + * The order of calibrated-data writing function is a bit different from the + * order in UEFI. Here is the conversion to match the order of calibrated-data + * writing function. + */ +static void cali_cnv(unsigned char *data, unsigned int base, int offset) +{ + struct cali_reg reg_data; + + memcpy(&reg_data, &data[base], sizeof(reg_data)); + /* the data order has to be swapped between r0_low_reg and inv0_reg */ + swap(reg_data.r0_low_reg, reg_data.invr0_reg); + + cpu_to_be32_array((__force __be32 *)(data + offset + 1), + (u32 *)&reg_data, TASDEV_CALIB_N); +} + static void tas2781_apply_calib(struct tasdevice_priv *p) { struct calidata *cali_data = &p->cali_data; @@ -103,8 +120,7 @@ static void tas2781_apply_calib(struct tasdevice_priv *p) data[l] = k; oft++; - for (i = 0; i < TASDEV_CALIB_N * 4; i++) - data[l + i + 1] = data[4 * oft + i]; + cali_cnv(data, 4 * oft, l); k++; } } @@ -130,9 +146,8 @@ static void tas2781_apply_calib(struct tasdevice_priv *p) for (j = p->ndev - 1; j >= 0; j--) { l = j * (cali_data->cali_dat_sz_per_dev + 1); - for (i = TASDEV_CALIB_N * 4; i > 0 ; i--) - data[l + i] = data[p->index * 5 + i]; - data[l+i] = j; + cali_cnv(data, cali_data->cali_dat_sz_per_dev * j, l); + data[l] = j; } } -- 2.43.0

2 1

Feature Request: conf.d for USB-Audio
by GitHub issues - edited 08 Sep '25

08 Sep '25

alsa-project/alsa-ucm-conf issue #609 was edited from FrostyCoolSlug: The release cadence of `alsa-ucm-conf` tends to be a little on the slow side (generally around 6 months between releases), but the problem I'm hitting currently is the requirement for users to manually edit `USB-Audio.conf` in order to get earlier support for their devices (and depending on distribution, support could be delayed upwards of two years). I think a method where a package could be created to drop files into a conf.d style directory would allow for a users device to be configured, without the need for manually editing `USB-Audio.conf` to add support. Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/609 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Feature Request: conf.d for USB-Audio
by GitHub issues - opened 08 Sep '25

08 Sep '25

alsa-project/alsa-ucm-conf issue #609 was opened from FrostyCoolSlug: The release cadence of `alsa-ucm-conf` tends to be a little on the slow side (generally around 6 months between releases), but the problem I'm hitting currently is the requirement for users to manually edit `USB-Audio.conf` in order to get support for their devices (and depending on distribution, support could be delayed upwards of two years). I think a method where a package could be created to drop files into a conf.d style directory would allow for a users device to be configured, without the need for manually editing `USB-Audio.conf` to add support. Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/609 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Mic from audio jack not work on Dell Precision M4800. Please add mic drivers
by GitHub issues - edited 07 Sep '25

07 Sep '25

alsa-project/alsa-lib issue #476 was edited from Slavomir9: Hello, on my Dell Precision M4800 not work mic on headset Koss CS100 audio jack (non USB) version. Please add mic drivers. [Dell Precision M4800 ](https://www.google.com/search?q=%0D%0ADell+Precision+M4800%0D%0A&sca_esv=e618e5e4341fb9f4&) [Headset Koss CS100](https://www.kaufland.sk/product/5373091/) I use dual boot. On Windows 11 work mic only after install drivers from Dell website. On Dell website are drivers for Linux for extremely old version of Ubuntu: Ubuntu® 12.04 More information about bug here https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/2122269 Please add mic drivers. Thanks Issue URL : https://github.com/alsa-project/alsa-lib/issues/476 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

Mic from audio jack not work on Dell Precision M4800. Please add mic drivers
by GitHub issues - edited 07 Sep '25

07 Sep '25

alsa-project/alsa-lib issue #476 was edited from Slavomir9: Hello, on my Dell Precision M4800 not work mic on headset Koss CS100 audio jack (non USB) version. Please add mic drivers. [Dell Precision M4800 ](https://www.google.com/search?q=%0D%0ADell+Precision+M4800%0D%0A&sca_esv=e618e5e4341fb9f4&) [Headset Koss CS100](https://www.kaufland.sk/product/5373091/) I use dual boot. On Windows 11 work mic only after install drivers from Dell website. More information about bug here https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/2122269 Please add mic drivers. Thanks Issue URL : https://github.com/alsa-project/alsa-lib/issues/476 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

Mic from audio jack not work on Dell Precision M4800. Please add mic drivers
by GitHub issues - edited 07 Sep '25

07 Sep '25

alsa-project/alsa-lib issue #476 was edited from Slavomir9: Hello, on my Dell Precision M4800 not work mic on headset Koss CS100 audio jack (non USB) version. Please add mic drivers. [Dell Precision M4800 ](https://www.google.com/search?q=%0D%0ADell+Precision+M4800%0D%0A&sca_esv=e618e5e4341fb9f4&) [Headset Koss CS100](https://www.kaufland.sk/product/5373091/) I use dual boot. On Windows 11 work mic only after install drivers from Dell website. Please add mic drivers. Thanks Issue URL : https://github.com/alsa-project/alsa-lib/issues/476 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

Mic from audio jack not work on Dell Precision M4800
by GitHub issues - edited 07 Sep '25

07 Sep '25

alsa-project/alsa-lib issue #476 was edited from Slavomir9: Hello, on my Dell Precision M4800 not work mic on headset Koss CS100 audio jack (non USB) version. Please add mic drivers. [Dell Precision M4800 ](https://www.google.com/search?q=%0D%0ADell+Precision+M4800%0D%0A&sca_esv=e618e5e4341fb9f4&) [Headset Koss CS100](https://www.kaufland.sk/product/5373091/) I use dual boot. On Windows 11 work mic only after install drivers from Dell website. Please add mic drivers. Thanks Issue URL : https://github.com/alsa-project/alsa-lib/issues/476 Repository URL: https://github.com/alsa-project/alsa-lib

1 0