August 2025 - Alsa-devel - mailman.alsa-project.org

[PATCH v2] ASoC: amd: acp: Adjust pdm gain value
by Venkata Prasad Potturu 21 Aug '25

21 Aug '25

Set pdm gain value by setting PDM_MISC_CTRL_MASK value. To avoid low pdm gain value. Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu(a)amd.com> --- Changes since v1: - remove pdm gain adjustment using module parameter. sound/soc/amd/acp/amd.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/amd/acp/amd.h b/sound/soc/amd/acp/amd.h index cb8d97122f95..73a028e67246 100644 --- a/sound/soc/amd/acp/amd.h +++ b/sound/soc/amd/acp/amd.h @@ -130,7 +130,7 @@ #define PDM_DMA_INTR_MASK 0x10000 #define PDM_DEC_64 0x2 #define PDM_CLK_FREQ_MASK 0x07 -#define PDM_MISC_CTRL_MASK 0x10 +#define PDM_MISC_CTRL_MASK 0x18 #define PDM_ENABLE 0x01 #define PDM_DISABLE 0x00 #define DMA_EN_MASK 0x02 -- 2.43.0

3 2

Low maximum volume with Plantronics Blackwire 315.1
by Paul Menzel 21 Aug '25

21 Aug '25

Dear Linux folks, On the Intel Kaby Lake laptop Dell XPS 13 9360, using Debian sid/unstable with Debian sid/unstable and Linux 6.17.0-rc2-00053-gb19a97d57c15, connecting the USB headset Plantronics Blackwire 315.1, even turning the volume on the headset control (or GNOME, both are linked) to maximum, the volume is still very low. `pavucontrol` shows everything on 100 %. Is that a driver problem, or somehow a hardware property? I uploaded the files done by `/sbin/alsa-info` [1]. Kind regards, Paul [1]: https://alsa-project.org/db/?f=ccc9945a112e88c7b6bf29ecc072f05e0cb72f3f

1 0

[PATCH v1] ALSA: hda/tas2781: Enable init_profile_id for device initialization
by Shenghao Ding 21 Aug '25

21 Aug '25

Optimize the time consumption of profile switching, init_profile saves the common settings of different profiles, such as the dsp coefficients, etc, which can greatly reduce the profile switching time comsumption and remove the repetitive settings. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- sound/hda/codecs/side-codecs/tas2781_hda_i2c.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c b/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c index 318f8c58ae61..97c33fee9660 100644 --- a/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c +++ b/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c @@ -477,6 +477,12 @@ static void tasdevice_dspfw_init(void *context) if (tas_priv->fmw->nr_configurations > 0) tas_priv->cur_conf = 0; + /* Init common setting for different audio profiles */ + if (tas_priv->rcabin.init_profile_id >= 0) + tasdevice_select_cfg_blk(tas_priv, + tas_priv->rcabin.init_profile_id, + TASDEVICE_BIN_BLK_PRE_POWER_UP); + /* If calibrated data occurs error, dsp will still works with default * calibrated data inside algo. */ @@ -779,6 +785,12 @@ static int tas2781_system_resume(struct device *dev) tasdevice_reset(tas_hda->priv); tasdevice_prmg_load(tas_hda->priv, tas_hda->priv->cur_prog); + /* Init common setting for different audio profiles */ + if (tas_hda->priv->rcabin.init_profile_id >= 0) + tasdevice_select_cfg_blk(tas_hda->priv, + tas_hda->priv->rcabin.init_profile_id, + TASDEVICE_BIN_BLK_PRE_POWER_UP); + if (tas_hda->priv->playback_started) tasdevice_tuning_switch(tas_hda->priv, 0); -- 2.43.0

3 3

[GIT PULL] ASoC fixes for v6.17-rc2
by Mark Brown 21 Aug '25

21 Aug '25

The following changes since commit c17b750b3ad9f45f2b6f7e6f7f4679844244f0b9: Linux 6.17-rc2 (2025-08-17 15:22:10 -0700) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git tags/asoc-fix-v6.17-rc2 for you to fetch changes up to 7c15e4cabfa96ed3cd717a2ed7a9961268ab21f7: ASoC: cs35l56: Fixes for CS35L63 for production (2025-08-20 19:56:20 +0100) ---------------------------------------------------------------- ASoC: Fixes for v6.17 A few fixes that came in during the past week, there's some updates for the CS35L56 which adjust the driver for production silicon and a fix for buggy resume of the ES9389. ---------------------------------------------------------------- Mark Brown (1): ASoC: cs35l56: Fixes for CS35L63 for production Richard Fitzgerald (1): ASoC: cs35l56: Handle new algorithms IDs for CS35L63 Stefan Binding (2): ASoC: cs35l56: Update Firmware Addresses for CS35L63 for production silicon ASoC: cs35l56: Remove SoundWire Clock Divider workaround for CS35L63 Zhang Yi (1): ASoC: codecs: ES9389: Modify the standby configuration include/sound/cs35l56.h | 5 +-- sound/soc/codecs/cs35l56-sdw.c | 69 --------------------------------------- sound/soc/codecs/cs35l56-shared.c | 29 ++++++++++++++-- sound/soc/codecs/cs35l56.c | 2 +- sound/soc/codecs/cs35l56.h | 3 -- sound/soc/codecs/es8389.c | 2 +- 6 files changed, 31 insertions(+), 79 deletions(-)

2 1

Audio garbled when using Multi plugin to record from 2+ USB soundcards on Raspberry Pi
by GitHub issues - opened 21 Aug '25

21 Aug '25

alsa-project/alsa-lib issue #472 was opened from TommyKaneko: I have been trying to use the multi plugin to record multiple channels from mutliple soundcards on the Raspberry Pi. The results are a garbled mess. I have diagnosed the reasons as thus: - current raspberry Pi OS uses alsa v1.2.8+rpt1 - the "fix" for the multi plugin was implemented in v1.2.9 : https://github.com/alsa-project/alsa-lib/commit/369df322577034ea872978d6470… I am aware that the multi plugin was not meant to be used on multiple soundcards that are not in sync, however if the clock drifts over time, this is ok for my application. I am here to seek advice on how I should go about creating a workaround. The limitations are that I need to use cheap USB microphones (it is a weight issue). Without going along the microcontroller route, I thought one way was to make an [external plugin](https://www.alsa-project.org/alsa-doc/alsa-lib/pcm_external_plugins…, based on the newly patched pcm_multi plugin. I am working on this, while climbing the steep learning curve. Perhaps I can contribute an external plugin for the project... In the meantime, does a developer have a better suggestion that I might have success with? Or any tips if you are familiar with the pcm_multi plugin? @perexg ? Issue URL : https://github.com/alsa-project/alsa-lib/issues/472 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

[PATCH v1 1/2] ASoC: tas2781: Add tas2118, tas2x20, tas5825 support
by Baojun Xu 20 Aug '25

20 Aug '25

Add tas2020, tas2118, tas2120, tas2320, tas5825 support in tas2781 driver. Tas2118, tas2x20 have no on-chip DSP, tas5825 have on-chip DSP but have no calibration required stereo smart amplifier. Signed-off-by: Baojun Xu <baojun.xu(a)ti.com> --- include/sound/tas2781.h | 11 +- include/sound/tas2x20-tlv.h | 259 ++++++++++++++++++++++++++ sound/soc/codecs/tas2781-comlib-i2c.c | 2 + sound/soc/codecs/tas2781-i2c.c | 156 +++++++++++----- 4 files changed, 381 insertions(+), 47 deletions(-) create mode 100644 include/sound/tas2x20-tlv.h diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h index f0aefc04a957..73ac447b9327 100644 --- a/include/sound/tas2781.h +++ b/include/sound/tas2781.h @@ -51,7 +51,9 @@ /* Software Reset, compatble with new device (TAS5825). */ #define TASDEVICE_REG_SWRESET TASDEVICE_REG(0x0, 0x0, 0x01) -#define TASDEVICE_REG_SWRESET_RESET (BIT(0) | BIT(4)) +#define TASDEVICE_REG_SWRESET_RESET BIT(0) + +#define TAS5825_REG_SWRESET_RESET (BIT(0) | BIT(4)) /* Checksum */ #define TASDEVICE_CHECKSUM_REG TASDEVICE_REG(0x0, 0x0, 0x7e) @@ -110,8 +112,14 @@ #define TAS2781_RUNTIME_RE_REG TASDEVICE_REG(0x64, 0x63, 0x44) enum audio_device { + TAS2020, + TAS2118, + TAS2120, + TAS2320, TAS2563, TAS2781, + TAS5825, + TAS_OTHERS, }; enum dspbin_type { @@ -194,6 +202,7 @@ struct tasdevice_priv { unsigned char coef_binaryname[64]; unsigned char rca_binaryname[64]; unsigned char dev_name[32]; + const unsigned char (*dvc_tlv_table)[4]; const char *name_prefix; unsigned char ndev; unsigned int dspbin_typ; diff --git a/include/sound/tas2x20-tlv.h b/include/sound/tas2x20-tlv.h new file mode 100644 index 000000000000..6e6bcec4a0a1 --- /dev/null +++ b/include/sound/tas2x20-tlv.h @@ -0,0 +1,259 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +// +// ALSA SoC Texas Instruments TAS2x20/TAS2118 Audio Smart Amplifier +// +// Copyright (C) 2025 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2x20/TAS2118 hda driver implements for one, two, or even multiple +// TAS2x20/TAS2118 chips. +// +// Author: Baojun Xu <baojun.xu(a)ti.com> +// + +#ifndef __TAS2X20_TLV_H__ +#define __TAS2X20_TLV_H__ + +#define TAS2X20_DVC_LEVEL TASDEVICE_REG(0x0, 0x2, 0x0c) +#define TAS2X20_AMP_LEVEL TASDEVICE_REG(0x0, 0x0, 0x07) + +static const __maybe_unused DECLARE_TLV_DB_SCALE(tas2x20_dvc_tlv, 1650, 50, 0); +static const __maybe_unused DECLARE_TLV_DB_SCALE(tas2x20_amp_tlv, 2100, 50, 0); + +/* pow(10, db/20) * pow(2,22) */ +static const __maybe_unused unsigned char tas2x20_dvc_table[][4] = { + { 0X00, 0X00, 0X0D, 0X00 }, /* -110.0db */ + { 0X00, 0X00, 0X0E, 0X00 }, /* -109.5db */ + { 0X00, 0X00, 0X0E, 0X00 }, /* -109.0db */ + { 0X00, 0X00, 0X0F, 0X00 }, /* -108.5db */ + { 0X00, 0X00, 0X10, 0X00 }, /* -108.0db */ + { 0X00, 0X00, 0X11, 0X00 }, /* -107.5db */ + { 0X00, 0X00, 0X12, 0X00 }, /* -107.0db */ + { 0X00, 0X00, 0X13, 0X00 }, /* -106.5db */ + { 0X00, 0X00, 0X15, 0X00 }, /* -106.0db */ + { 0X00, 0X00, 0X16, 0X00 }, /* -105.5db */ + { 0X00, 0X00, 0X17, 0X00 }, /* -105.0db */ + { 0X00, 0X00, 0X18, 0X00 }, /* -104.5db */ + { 0X00, 0X00, 0X1A, 0X00 }, /* -104.0db */ + { 0X00, 0X00, 0X1C, 0X00 }, /* -103.5db */ + { 0X00, 0X00, 0X1D, 0X00 }, /* -103.0db */ + { 0X00, 0X00, 0X1F, 0X00 }, /* -102.5db */ + { 0X00, 0X00, 0X21, 0X00 }, /* -102.0db */ + { 0X00, 0X00, 0X23, 0X00 }, /* -101.5db */ + { 0X00, 0X00, 0X25, 0X00 }, /* -101.0db */ + { 0X00, 0X00, 0X27, 0X00 }, /* -100.5db */ + { 0X00, 0X00, 0X29, 0X00 }, /* -100.0db */ + { 0X00, 0X00, 0X2C, 0X00 }, /* -99.5db */ + { 0X00, 0X00, 0X2F, 0X00 }, /* -99.0db */ + { 0X00, 0X00, 0X31, 0X00 }, /* -98.5db */ + { 0X00, 0X00, 0X34, 0X00 }, /* -98.0db */ + { 0X00, 0X00, 0X37, 0X00 }, /* -97.5db */ + { 0X00, 0X00, 0X3B, 0X00 }, /* -97.0db */ + { 0X00, 0X00, 0X3E, 0X00 }, /* -96.5db */ + { 0X00, 0X00, 0X42, 0X00 }, /* -96.0db */ + { 0X00, 0X00, 0X46, 0X00 }, /* -95.5db */ + { 0X00, 0X00, 0X4A, 0X00 }, /* -95.0db */ + { 0X00, 0X00, 0X4F, 0X00 }, /* -94.5db */ + { 0X00, 0X00, 0X53, 0X00 }, /* -94.0db */ + { 0X00, 0X00, 0X58, 0X00 }, /* -93.5db */ + { 0X00, 0X00, 0X5D, 0X00 }, /* -93.0db */ + { 0X00, 0X00, 0X63, 0X00 }, /* -92.5db */ + { 0X00, 0X00, 0X69, 0X00 }, /* -92.0db */ + { 0X00, 0X00, 0X6F, 0X00 }, /* -91.5db */ + { 0X00, 0X00, 0X76, 0X00 }, /* -91.0db */ + { 0X00, 0X00, 0X7D, 0X00 }, /* -90.5db */ + { 0X00, 0X00, 0X84, 0X00 }, /* -90.0db */ + { 0X00, 0X00, 0X8C, 0X00 }, /* -89.5db */ + { 0X00, 0X00, 0X94, 0X00 }, /* -89.0db */ + { 0X00, 0X00, 0X9D, 0X00 }, /* -88.5db */ + { 0X00, 0X00, 0XA6, 0X00 }, /* -88.0db */ + { 0X00, 0X00, 0XB0, 0X00 }, /* -87.5db */ + { 0X00, 0X00, 0XBB, 0X00 }, /* -87.0db */ + { 0X00, 0X00, 0XC6, 0X00 }, /* -86.5db */ + { 0X00, 0X00, 0XD2, 0X00 }, /* -86.0db */ + { 0X00, 0X00, 0XDE, 0X00 }, /* -85.5db */ + { 0X00, 0X00, 0XEB, 0X00 }, /* -85.0db */ + { 0X00, 0X00, 0XF9, 0X00 }, /* -84.5db */ + { 0X00, 0X01, 0X08, 0X00 }, /* -84.0db */ + { 0X00, 0X01, 0X18, 0X00 }, /* -83.5db */ + { 0X00, 0X01, 0X28, 0X00 }, /* -83.0db */ + { 0X00, 0X01, 0X3A, 0X00 }, /* -82.5db */ + { 0X00, 0X01, 0X4D, 0X00 }, /* -82.0db */ + { 0X00, 0X01, 0X60, 0X00 }, /* -81.5db */ + { 0X00, 0X01, 0X75, 0X00 }, /* -81.0db */ + { 0X00, 0X01, 0X8B, 0X00 }, /* -80.5db */ + { 0X00, 0X01, 0XA3, 0X00 }, /* -80.0db */ + { 0X00, 0X01, 0XBC, 0X00 }, /* -79.5db */ + { 0X00, 0X01, 0XD6, 0X00 }, /* -79.0db */ + { 0X00, 0X01, 0XF2, 0X00 }, /* -78.5db */ + { 0X00, 0X02, 0X10, 0X00 }, /* -78.0db */ + { 0X00, 0X02, 0X2F, 0X00 }, /* -77.5db */ + { 0X00, 0X02, 0X50, 0X00 }, /* -77.0db */ + { 0X00, 0X02, 0X73, 0X00 }, /* -76.5db */ + { 0X00, 0X02, 0X98, 0X00 }, /* -76.0db */ + { 0X00, 0X02, 0XC0, 0X00 }, /* -75.5db */ + { 0X00, 0X02, 0XE9, 0X00 }, /* -75.0db */ + { 0X00, 0X03, 0X16, 0X00 }, /* -74.5db */ + { 0X00, 0X03, 0X44, 0X00 }, /* -74.0db */ + { 0X00, 0X03, 0X76, 0X00 }, /* -73.5db */ + { 0X00, 0X03, 0XAA, 0X00 }, /* -73.0db */ + { 0X00, 0X03, 0XE2, 0X00 }, /* -72.5db */ + { 0X00, 0X04, 0X1D, 0X00 }, /* -72.0db */ + { 0X00, 0X04, 0X5B, 0X00 }, /* -71.5db */ + { 0X00, 0X04, 0X9E, 0X00 }, /* -71.0db */ + { 0X00, 0X04, 0XE4, 0X00 }, /* -70.5db */ + { 0X00, 0X05, 0X2E, 0X00 }, /* -70.0db */ + { 0X00, 0X05, 0X7C, 0X00 }, /* -69.5db */ + { 0X00, 0X05, 0XD0, 0X00 }, /* -69.0db */ + { 0X00, 0X06, 0X28, 0X00 }, /* -68.5db */ + { 0X00, 0X06, 0X85, 0X00 }, /* -68.0db */ + { 0X00, 0X06, 0XE8, 0X00 }, /* -67.5db */ + { 0X00, 0X07, 0X51, 0X00 }, /* -67.0db */ + { 0X00, 0X07, 0XC0, 0X00 }, /* -66.5db */ + { 0X00, 0X08, 0X36, 0X00 }, /* -66.0db */ + { 0X00, 0X08, 0XB2, 0X00 }, /* -65.5db */ + { 0X00, 0X09, 0X36, 0X00 }, /* -65.0db */ + { 0X00, 0X09, 0XC2, 0X00 }, /* -64.5db */ + { 0X00, 0X0A, 0X56, 0X00 }, /* -64.0db */ + { 0X00, 0X0A, 0XF3, 0X00 }, /* -63.5db */ + { 0X00, 0X0B, 0X99, 0X00 }, /* -63.0db */ + { 0X00, 0X0C, 0X49, 0X00 }, /* -62.5db */ + { 0X00, 0X0D, 0X03, 0X00 }, /* -62.0db */ + { 0X00, 0X0D, 0XC9, 0X00 }, /* -61.5db */ + { 0X00, 0X0E, 0X9A, 0X00 }, /* -61.0db */ + { 0X00, 0X0F, 0X77, 0X00 }, /* -60.5db */ + { 0X00, 0X10, 0X62, 0X00 }, /* -60.0db */ + { 0X00, 0X11, 0X5A, 0X00 }, /* -59.5db */ + { 0X00, 0X12, 0X62, 0X00 }, /* -59.0db */ + { 0X00, 0X13, 0X78, 0X00 }, /* -58.5db */ + { 0X00, 0X14, 0XA0, 0X00 }, /* -58.0db */ + { 0X00, 0X15, 0XD9, 0X00 }, /* -57.5db */ + { 0X00, 0X17, 0X24, 0X00 }, /* -57.0db */ + { 0X00, 0X18, 0X83, 0X00 }, /* -56.5db */ + { 0X00, 0X19, 0XF7, 0X00 }, /* -56.0db */ + { 0X00, 0X1B, 0X81, 0X00 }, /* -55.5db */ + { 0X00, 0X1D, 0X22, 0X00 }, /* -55.0db */ + { 0X00, 0X1E, 0XDC, 0X00 }, /* -54.5db */ + { 0X00, 0X20, 0XB0, 0X00 }, /* -54.0db */ + { 0X00, 0X22, 0XA0, 0X00 }, /* -53.5db */ + { 0X00, 0X24, 0XAD, 0X00 }, /* -53.0db */ + { 0X00, 0X26, 0XDA, 0X00 }, /* -52.5db */ + { 0X00, 0X29, 0X27, 0X00 }, /* -52.0db */ + { 0X00, 0X2B, 0X97, 0X00 }, /* -51.5db */ + { 0X00, 0X2E, 0X2D, 0X00 }, /* -51.0db */ + { 0X00, 0X30, 0XE9, 0X00 }, /* -50.5db */ + { 0X00, 0X33, 0XCF, 0X00 }, /* -50.0db */ + { 0X00, 0X36, 0XE1, 0X00 }, /* -49.5db */ + { 0X00, 0X3A, 0X21, 0X00 }, /* -49.0db */ + { 0X00, 0X3D, 0X93, 0X00 }, /* -48.5db */ + { 0X00, 0X41, 0X39, 0X00 }, /* -48.0db */ + { 0X00, 0X45, 0X17, 0X00 }, /* -47.5db */ + { 0X00, 0X49, 0X2F, 0X00 }, /* -47.0db */ + { 0X00, 0X4D, 0X85, 0X00 }, /* -46.5db */ + { 0X00, 0X52, 0X1D, 0X00 }, /* -46.0db */ + { 0X00, 0X56, 0XFA, 0X00 }, /* -45.5db */ + { 0X00, 0X5C, 0X22, 0X00 }, /* -45.0db */ + { 0X00, 0X61, 0X97, 0X00 }, /* -44.5db */ + { 0X00, 0X67, 0X60, 0X00 }, /* -44.0db */ + { 0X00, 0X6D, 0X80, 0X00 }, /* -43.5db */ + { 0X00, 0X73, 0XFD, 0X00 }, /* -43.0db */ + { 0X00, 0X7A, 0XDC, 0X00 }, /* -42.5db */ + { 0X00, 0X82, 0X24, 0X00 }, /* -42.0db */ + { 0X00, 0X89, 0XDA, 0X00 }, /* -41.5db */ + { 0X00, 0X92, 0X05, 0X00 }, /* -41.0db */ + { 0X00, 0X9A, 0XAC, 0X00 }, /* -40.5db */ + { 0X00, 0XA3, 0XD7, 0X00 }, /* -40.0db */ + { 0X00, 0XAD, 0X8C, 0X00 }, /* -39.5db */ + { 0X00, 0XB7, 0XD4, 0X00 }, /* -39.0db */ + { 0X00, 0XC2, 0XB9, 0X00 }, /* -38.5db */ + { 0X00, 0XCE, 0X43, 0X00 }, /* -38.0db */ + { 0X00, 0XDA, 0X7B, 0X00 }, /* -37.5db */ + { 0X00, 0XE7, 0X6E, 0X00 }, /* -37.0db */ + { 0X00, 0XF5, 0X24, 0X00 }, /* -36.5db */ + { 0X01, 0X03, 0XAB, 0X00 }, /* -36.0db */ + { 0X01, 0X13, 0X0E, 0X00 }, /* -35.5db */ + { 0X01, 0X23, 0X5A, 0X00 }, /* -35.0db */ + { 0X01, 0X34, 0X9D, 0X00 }, /* -34.5db */ + { 0X01, 0X46, 0XE7, 0X00 }, /* -34.0db */ + { 0X01, 0X5A, 0X46, 0X00 }, /* -33.5db */ + { 0X01, 0X6E, 0XCA, 0X00 }, /* -33.0db */ + { 0X01, 0X84, 0X86, 0X00 }, /* -32.5db */ + { 0X01, 0X9B, 0X8C, 0X00 }, /* -32.0db */ + { 0X01, 0XB3, 0XEE, 0X00 }, /* -31.5db */ + { 0X01, 0XCD, 0XC3, 0X00 }, /* -31.0db */ + { 0X01, 0XE9, 0X20, 0X00 }, /* -30.5db */ + { 0X02, 0X06, 0X1B, 0X00 }, /* -30.0db */ + { 0X02, 0X24, 0XCE, 0X00 }, /* -29.5db */ + { 0X02, 0X45, 0X53, 0X00 }, /* -29.0db */ + { 0X02, 0X67, 0XC5, 0X00 }, /* -28.5db */ + { 0X02, 0X8C, 0X42, 0X00 }, /* -28.0db */ + { 0X02, 0XB2, 0XE8, 0X00 }, /* -27.5db */ + { 0X02, 0XDB, 0XD8, 0X00 }, /* -27.0db */ + { 0X03, 0X07, 0X36, 0X00 }, /* -26.5db */ + { 0X03, 0X35, 0X25, 0X00 }, /* -26.0db */ + { 0X03, 0X65, 0XCD, 0X00 }, /* -25.5db */ + { 0X03, 0X99, 0X57, 0X00 }, /* -25.0db */ + { 0X03, 0XCF, 0XEE, 0X00 }, /* -24.5db */ + { 0X04, 0X09, 0XC2, 0X00 }, /* -24.0db */ + { 0X04, 0X47, 0X03, 0X00 }, /* -23.5db */ + { 0X04, 0X87, 0XE5, 0X00 }, /* -23.0db */ + { 0X04, 0XCC, 0XA0, 0X00 }, /* -22.5db */ + { 0X05, 0X15, 0X6D, 0X00 }, /* -22.0db */ + { 0X05, 0X62, 0X8A, 0X00 }, /* -21.5db */ + { 0X05, 0XB4, 0X39, 0X00 }, /* -21.0db */ + { 0X06, 0X0A, 0XBF, 0X00 }, /* -20.5db */ + { 0X06, 0X66, 0X66, 0X00 }, /* -20.0db */ + { 0X06, 0XC7, 0X7B, 0X00 }, /* -19.5db */ + { 0X07, 0X2E, 0X50, 0X00 }, /* -19.0db */ + { 0X07, 0X9B, 0X3D, 0X00 }, /* -18.5db */ + { 0X08, 0X0E, 0X9F, 0X00 }, /* -18.0db */ + { 0X08, 0X88, 0XD7, 0X00 }, /* -17.5db */ + { 0X09, 0X0A, 0X4D, 0X00 }, /* -17.0db */ + { 0X09, 0X93, 0X6E, 0X00 }, /* -16.5db */ + { 0X0A, 0X24, 0XB0, 0X00 }, /* -16.0db */ + { 0X0A, 0XBE, 0X8D, 0X00 }, /* -15.5db */ + { 0X0B, 0X61, 0X88, 0X00 }, /* -15.0db */ + { 0X0C, 0X0E, 0X2B, 0X00 }, /* -14.5db */ + { 0X0C, 0XC5, 0X09, 0X00 }, /* -14.0db */ + { 0X0D, 0X86, 0XBD, 0X00 }, /* -13.5db */ + { 0X0E, 0X53, 0XEB, 0X00 }, /* -13.0db */ + { 0X0F, 0X2D, 0X42, 0X00 }, /* -12.5db */ + { 0X10, 0X13, 0X79, 0X00 }, /* -12.0db */ + { 0X11, 0X07, 0X54, 0X00 }, /* -11.5db */ + { 0X12, 0X09, 0XA3, 0X00 }, /* -11.0db */ + { 0X13, 0X1B, 0X40, 0X00 }, /* -10.5db */ + { 0X14, 0X3D, 0X13, 0X00 }, /* -10.0db */ + { 0X15, 0X70, 0X12, 0X00 }, /* -9.5db */ + { 0X16, 0XB5, 0X43, 0X00 }, /* -9.0db */ + { 0X18, 0X0D, 0XB8, 0X00 }, /* -8.5db */ + { 0X19, 0X7A, 0X96, 0X00 }, /* -8.0db */ + { 0X1A, 0XFD, 0X13, 0X00 }, /* -7.5db */ + { 0X1C, 0X96, 0X76, 0X00 }, /* -7.0db */ + { 0X1E, 0X48, 0X1C, 0X00 }, /* -6.5db */ + { 0X20, 0X13, 0X73, 0X00 }, /* -6.0db */ + { 0X21, 0XFA, 0X02, 0X00 }, /* -5.5db */ + { 0X23, 0XFD, 0X66, 0X00 }, /* -5.0db */ + { 0X26, 0X1F, 0X54, 0X00 }, /* -4.5db */ + { 0X28, 0X61, 0X9A, 0X00 }, /* -4.0db */ + { 0X2A, 0XC6, 0X25, 0X00 }, /* -3.5db */ + { 0X2D, 0X4E, 0XFB, 0X00 }, /* -3.0db */ + { 0X2F, 0XFE, 0X44, 0X00 }, /* -2.5db */ + { 0X32, 0XD6, 0X46, 0X00 }, /* -2.0db */ + { 0X35, 0XD9, 0X6B, 0X00 }, /* -1.5db */ + { 0X39, 0X0A, 0X41, 0X00 }, /* -1.0db */ + { 0X3C, 0X6B, 0X7E, 0X00 }, /* -0.5db */ + { 0X40, 0X00, 0X00, 0X00 }, /* 0.0db */ + { 0X43, 0XCA, 0XD0, 0X00 }, /* 0.5db */ + { 0X47, 0XCF, 0X26, 0X00 }, /* 1.0db */ + { 0X4C, 0X10, 0X6B, 0X00 }, /* 1.5db */ + { 0X50, 0X92, 0X3B, 0X00 }, /* 2.0db */ + { 0X55, 0X58, 0X6A, 0X00 }, /* 2.5db */ + { 0X5A, 0X67, 0X03, 0X00 }, /* 3.0db */ + { 0X5F, 0XC2, 0X53, 0X00 }, /* 3.5db */ + { 0X65, 0X6E, 0XE3, 0X00 }, /* 4.0db */ + { 0X6B, 0X71, 0X86, 0X00 }, /* 4.5db */ + { 0X71, 0XCF, 0X54, 0X00 }, /* 5.0db */ + { 0X78, 0X8D, 0XB4, 0X00 }, /* 5.5db */ + { 0X7F, 0XB2, 0X61, 0X00 }, /* 6.0db */ +}; +#endif diff --git a/sound/soc/codecs/tas2781-comlib-i2c.c b/sound/soc/codecs/tas2781-comlib-i2c.c index c078bb0a8437..764304604e2c 100644 --- a/sound/soc/codecs/tas2781-comlib-i2c.c +++ b/sound/soc/codecs/tas2781-comlib-i2c.c @@ -320,6 +320,8 @@ void tasdevice_reset(struct tasdevice_priv *tas_dev) for (i = 0; i < tas_dev->ndev; i++) { ret = tasdevice_dev_write(tas_dev, i, TASDEVICE_REG_SWRESET, + tas_dev->chip_id == TAS5825 ? + TAS5825_REG_SWRESET_RESET : TASDEVICE_REG_SWRESET_RESET); if (ret < 0) dev_err(tas_dev->dev, diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index ea3cdb8553de..cf6bd4d63f31 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -30,8 +30,10 @@ #include <sound/tas2781.h> #include <sound/tas2781-comlib-i2c.h> #include <sound/tlv.h> +#include <sound/tas2x20-tlv.h> #include <sound/tas2563-tlv.h> #include <sound/tas2781-tlv.h> +#include <sound/tas5825-tlv.h> #include <linux/unaligned.h> #define X2563_CL_STT_VAL(xreg, xval) \ @@ -98,16 +100,26 @@ static const struct bulk_reg_val tas2781_cali_start_reg[] = { }; static const struct i2c_device_id tasdevice_id[] = { + { "tas2020", TAS2020 }, + { "tas2118", TAS2118 }, + { "tas2120", TAS2120 }, + { "tas2320", TAS2320 }, { "tas2563", TAS2563 }, { "tas2781", TAS2781 }, + { "tas5825", TAS5825 }, {} }; MODULE_DEVICE_TABLE(i2c, tasdevice_id); #ifdef CONFIG_OF static const struct of_device_id tasdevice_of_match[] = { + { .compatible = "ti,tas2020" }, + { .compatible = "ti,tas2118" }, + { .compatible = "ti,tas2120" }, + { .compatible = "ti,tas2320" }, { .compatible = "ti,tas2563" }, { .compatible = "ti,tas2781" }, + { .compatible = "ti,tas5825" }, {}, }; MODULE_DEVICE_TABLE(of, tasdevice_of_match); @@ -797,7 +809,7 @@ static int tasdev_nop_get( return 0; } -static int tas2563_digital_gain_get( +static int tasdevice_digital_gain_get( struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { @@ -823,15 +835,15 @@ static int tas2563_digital_gain_get( while (r > 1 + l) { mid = (l + r) / 2; - ar_mid = get_unaligned_be32(tas2563_dvc_table[mid]); + ar_mid = get_unaligned_be32(tas_dev->dvc_tlv_table[mid]); if (target < ar_mid) r = mid; else l = mid; } - ar_l = get_unaligned_be32(tas2563_dvc_table[l]); - ar_r = get_unaligned_be32(tas2563_dvc_table[r]); + ar_l = get_unaligned_be32(tas_dev->dvc_tlv_table[l]); + ar_r = get_unaligned_be32(tas_dev->dvc_tlv_table[r]); /* find out the member same as or closer to the current volume */ ucontrol->value.integer.value[0] = @@ -841,7 +853,7 @@ static int tas2563_digital_gain_get( return 0; } -static int tas2563_digital_gain_put( +static int tasdevice_digital_gain_put( struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { @@ -867,7 +879,7 @@ static int tas2563_digital_gain_put( } volrd = get_unaligned_be32(&data[0]); - volwr = get_unaligned_be32(tas2563_dvc_table[vol]); + volwr = get_unaligned_be32(tas_dev->dvc_tlv_table[vol]); if (volrd == volwr) { rc = 0; @@ -876,7 +888,7 @@ static int tas2563_digital_gain_put( for (i = 0; i < tas_dev->ndev; i++) { ret = tasdevice_dev_bulk_write(tas_dev, i, reg, - (unsigned char *)tas2563_dvc_table[vol], 4); + (unsigned char *)tas_dev->dvc_tlv_table[vol], 4); if (ret) { dev_err(tas_dev->dev, "%s, set digital vol error in dev %d\n", @@ -892,11 +904,6 @@ static int tas2563_digital_gain_put( return rc; } -static const struct snd_kcontrol_new tasdevice_snd_controls[] = { - SOC_SINGLE_BOOL_EXT("Speaker Force Firmware Load", 0, - tasdev_force_fwload_get, tasdev_force_fwload_put), -}; - static const struct snd_kcontrol_new tasdevice_cali_controls[] = { SOC_SINGLE_EXT("Calibration Stop", SND_SOC_NOPM, 0, 1, 0, tasdev_nop_get, tasdev_calib_stop_put), @@ -907,6 +914,16 @@ static const struct snd_kcontrol_new tasdevice_cali_controls[] = { SND_SOC_BYTES_EXT("Amp XMA2 Data", 6, tasdev_XMA2_data_get, NULL), }; +static const struct snd_kcontrol_new tas2x20_snd_controls[] = { + SOC_SINGLE_RANGE_EXT_TLV("Speaker Analog Volume", TAS2X20_AMP_LEVEL, + 0, 0, 42, 1, tas2781_amp_getvol, + tas2781_amp_putvol, tas2x20_amp_tlv), + SOC_SINGLE_RANGE_EXT_TLV("Speaker Digital Volume", TAS2X20_DVC_LEVEL, + 0, 0, ARRAY_SIZE(tas2x20_dvc_table) - 1, 0, + tasdevice_digital_gain_get, tasdevice_digital_gain_put, + tas2x20_dvc_tlv), +}; + static const struct snd_kcontrol_new tas2781_snd_controls[] = { SOC_SINGLE_RANGE_EXT_TLV("Speaker Analog Volume", TAS2781_AMP_LEVEL, 1, 0, 20, 0, tas2781_amp_getvol, @@ -916,6 +933,15 @@ static const struct snd_kcontrol_new tas2781_snd_controls[] = { tas2781_digital_putvol, tas2781_dvc_tlv), }; +static const struct snd_kcontrol_new tas5825_snd_controls[] = { + SOC_SINGLE_RANGE_EXT_TLV("Speaker Analog Volume", TAS5825_AMP_LEVEL, + 0, 0, 31, 1, tas2781_amp_getvol, + tas2781_amp_putvol, tas5825_amp_tlv), + SOC_SINGLE_RANGE_EXT_TLV("Speaker Digital Volume", TAS5825_DVC_LEVEL, + 0, 0, 254, 1, tas2781_amp_getvol, + tas2781_amp_putvol, tas5825_dvc_tlv), +}; + static const struct snd_kcontrol_new tas2781_cali_controls[] = { SND_SOC_BYTES_EXT("Amp Latch Data", 3, tas2781_latch_reg_get, NULL), }; @@ -923,7 +949,7 @@ static const struct snd_kcontrol_new tas2781_cali_controls[] = { static const struct snd_kcontrol_new tas2563_snd_controls[] = { SOC_SINGLE_RANGE_EXT_TLV("Speaker Digital Volume", TAS2563_DVC_LVL, 0, 0, ARRAY_SIZE(tas2563_dvc_table) - 1, 0, - tas2563_digital_gain_get, tas2563_digital_gain_put, + tasdevice_digital_gain_get, tasdevice_digital_gain_put, tas2563_dvc_tlv), }; @@ -968,7 +994,7 @@ static int tasdevice_info_chip_id(struct snd_kcontrol *kcontrol, { uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; uinfo->count = 1; - uinfo->value.integer.min = TAS2563; + uinfo->value.integer.min = TAS2020; uinfo->value.integer.max = TAS2781; return 0; @@ -1168,9 +1194,9 @@ static int tasdevice_active_num_put(struct snd_kcontrol *kcontrol, static int tasdevice_dsp_create_ctrls(struct tasdevice_priv *tas_priv) { struct snd_kcontrol_new *dsp_ctrls; - char *active_dev_num, *chip_id; + char *active_dev_num, *chip_id, *fw_load; char *conf_name, *prog_name; - int nr_controls = 4; + int nr_controls = 5; int mix_index = 0; /* Alloc kcontrol via devm_kzalloc, which don't manually @@ -1228,6 +1254,19 @@ static int tasdevice_dsp_create_ctrls(struct tasdevice_priv *tas_priv) dsp_ctrls[mix_index].get = tasdevice_get_chip_id; mix_index++; + fw_load = devm_kstrdup(tas_priv->dev, "Speaker Force Firmware Load", + GFP_KERNEL); + if (!fw_load) + return -ENOMEM; + + dsp_ctrls[mix_index].name = fw_load; + dsp_ctrls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER; + dsp_ctrls[mix_index].info = snd_soc_info_bool_ext; + dsp_ctrls[mix_index].put = tasdev_force_fwload_put; + dsp_ctrls[mix_index].get = tasdev_force_fwload_get; + dsp_ctrls[mix_index].private_value = 0UL; + mix_index++; + return snd_soc_add_component_controls(tas_priv->codec, dsp_ctrls, nr_controls < mix_index ? nr_controls : mix_index); } @@ -1587,6 +1626,9 @@ static void tasdevice_fw_ready(const struct firmware *fmw, * failing to load DSP firmware is NOT an error. */ tas_priv->fw_state = TASDEVICE_RCA_FW_OK; + /* There is no DSP firmware required for TAS2118/2X20. */ + if (tas_priv->chip_id < TAS2563) + goto out; if (tas_priv->name_prefix) scnprintf(tas_priv->coef_binaryname, 64, "%s-%s_coef.bin", tas_priv->name_prefix, tas_priv->dev_name); @@ -1608,34 +1650,37 @@ static void tasdevice_fw_ready(const struct firmware *fmw, dev_err(tas_priv->dev, "dsp controls error\n"); goto out; } - - ret = tasdevice_create_cali_ctrls(tas_priv); - if (ret) { - dev_err(tas_priv->dev, "cali controls error\n"); - goto out; - } - tas_priv->fw_state = TASDEVICE_DSP_FW_ALL_OK; - /* If calibrated data occurs error, dsp will still works with default - * calibrated data inside algo. - */ - for (i = 0; i < tas_priv->ndev; i++) { - if (tas_priv->name_prefix) - scnprintf(tas_priv->cal_binaryname[i], 64, - "%s-%s_cal_0x%02x.bin", tas_priv->name_prefix, - tas_priv->dev_name, - tas_priv->tasdevice[i].dev_addr); - else - scnprintf(tas_priv->cal_binaryname[i], 64, - "%s_cal_0x%02x.bin", tas_priv->dev_name, - tas_priv->tasdevice[i].dev_addr); - ret = tas2781_load_calibration(tas_priv, - tas_priv->cal_binaryname[i], i); - if (ret != 0) - dev_err(tas_priv->dev, - "%s: load %s error, default will effect\n", - __func__, tas_priv->cal_binaryname[i]); + /* There is no calibration required for TAS5825. */ + if (tas_priv->chip_id < TAS5825) { + ret = tasdevice_create_cali_ctrls(tas_priv); + if (ret) { + dev_err(tas_priv->dev, "cali controls error\n"); + goto out; + } + /* If calibrated data occurs error, dsp will still works + * with default calibrated data inside algo. + */ + for (i = 0; i < tas_priv->ndev; i++) { + if (tas_priv->name_prefix) + scnprintf(tas_priv->cal_binaryname[i], 64, + "%s-%s_cal_0x%02x.bin", + tas_priv->name_prefix, + tas_priv->dev_name, + tas_priv->tasdevice[i].dev_addr); + else + scnprintf(tas_priv->cal_binaryname[i], 64, + "%s_cal_0x%02x.bin", + tas_priv->dev_name, + tas_priv->tasdevice[i].dev_addr); + ret = tas2781_load_calibration(tas_priv, + tas_priv->cal_binaryname[i], i); + if (ret != 0) + dev_err(tas_priv->dev, + "%s: load %s error, keep default.\n", + __func__, tas_priv->cal_binaryname[i]); + } } tasdevice_prmg_load(tas_priv, 0); @@ -1658,7 +1703,8 @@ static void tasdevice_fw_ready(const struct firmware *fmw, comp, &acoustic_ctl_fops); #endif out: - if (tas_priv->fw_state == TASDEVICE_RCA_FW_OK) { + if ((tas_priv->fw_state == TASDEVICE_RCA_FW_OK) && + (tas_priv->chip_id >= TAS2563)) { /* If DSP FW fail, DSP kcontrol won't be created. */ tasdevice_dsp_remove(tas_priv); } @@ -1804,13 +1850,27 @@ static int tasdevice_codec_probe(struct snd_soc_component *codec) int rc; switch (tas_priv->chip_id) { + case TAS2020: + case TAS2118: + case TAS2120: + case TAS2320: + p = (struct snd_kcontrol_new *)tas2x20_snd_controls; + size = ARRAY_SIZE(tas2x20_snd_controls); + tas_priv->dvc_tlv_table = tas2x20_dvc_table; + break; case TAS2781: p = (struct snd_kcontrol_new *)tas2781_snd_controls; size = ARRAY_SIZE(tas2781_snd_controls); break; + case TAS5825: + p = (struct snd_kcontrol_new *)tas5825_snd_controls; + size = ARRAY_SIZE(tas5825_snd_controls); + break; default: p = (struct snd_kcontrol_new *)tas2563_snd_controls; size = ARRAY_SIZE(tas2563_snd_controls); + tas_priv->dvc_tlv_table = tas2563_dvc_table; + break; } rc = snd_soc_add_component_controls(codec, p, size); @@ -1850,8 +1910,6 @@ static const struct snd_soc_component_driver soc_codec_driver_tasdevice = { .probe = tasdevice_codec_probe, .remove = tasdevice_codec_remove, - .controls = tasdevice_snd_controls, - .num_controls = ARRAY_SIZE(tasdevice_snd_controls), .dapm_widgets = tasdevice_dapm_widgets, .num_dapm_widgets = ARRAY_SIZE(tasdevice_dapm_widgets), .dapm_routes = tasdevice_audio_map, @@ -1967,7 +2025,13 @@ static void tasdevice_i2c_remove(struct i2c_client *client) #ifdef CONFIG_ACPI static const struct acpi_device_id tasdevice_acpi_match[] = { - { "TAS2781", TAS2781 }, + { "TXNW2020", TAS2020 }, + { "TXNW2118", TAS2118 }, + { "TXNW2120", TAS2120 }, + { "TXNW2320", TAS2320 }, + { "TXNW2563", TAS2563 }, + { "TXNW2781", TAS2781 }, + { "TXNW5825", TAS5825 }, {}, }; -- 2.43.0

1 0

[tiwai-sound:for-next 17/18] sound/usb/usx2y/us144mkii_midi.c:65 tascam_midi_in_urb_complete() error: we previously assumed 'tascam' could be null (see line 54)
by Dan Carpenter 19 Aug '25

19 Aug '25

tree: https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git for-next head: d9f0633867711cff87c5604a4f90daa8ab986e4f commit: 0ec417aa85467c6fad0563621b74868be0faf00d [17/18] ALSA: usb-audio: Add infrastructure for TASCAM US-144MKII config: powerpc64-randconfig-r073-20250819 (https://download.01.org/0day-ci/archive/20250819/202508192109.lcMrINK1-lkp@…) compiler: clang version 22.0.0git (https://github.com/llvm/llvm-project 93d24b6b7b148c47a2fa228a4ef31524fa1d9f3f) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp(a)intel.com> | Reported-by: Dan Carpenter <dan.carpenter(a)linaro.org> | Closes: https://lore.kernel.org/r/202508192109.lcMrINK1-lkp@intel.com/ smatch warnings: sound/usb/usx2y/us144mkii_midi.c:65 tascam_midi_in_urb_complete() error: we previously assumed 'tascam' could be null (see line 54) vim +/tascam +65 sound/usb/usx2y/us144mkii_midi.c 67afec157fe63d Šerif Rami 2025-08-14 38 67afec157fe63d Šerif Rami 2025-08-14 39 void tascam_midi_in_urb_complete(struct urb *urb) 67afec157fe63d Šerif Rami 2025-08-14 40 { 67afec157fe63d Šerif Rami 2025-08-14 41 struct tascam_card *tascam = urb->context; 67afec157fe63d Šerif Rami 2025-08-14 42 int ret; 67afec157fe63d Šerif Rami 2025-08-14 43 67afec157fe63d Šerif Rami 2025-08-14 44 if (urb->status) { 67afec157fe63d Šerif Rami 2025-08-14 45 if (urb->status != -ENOENT && urb->status != -ECONNRESET && 67afec157fe63d Šerif Rami 2025-08-14 46 urb->status != -ESHUTDOWN && urb->status != -EPROTO) { 67afec157fe63d Šerif Rami 2025-08-14 47 dev_err_ratelimited(tascam->card->dev, ^^^^^^^^^^^^ Unchecked dereference. 67afec157fe63d Šerif Rami 2025-08-14 48 "MIDI IN URB failed: status %d\n", 67afec157fe63d Šerif Rami 2025-08-14 49 urb->status); 67afec157fe63d Šerif Rami 2025-08-14 50 } 67afec157fe63d Šerif Rami 2025-08-14 51 goto out; 67afec157fe63d Šerif Rami 2025-08-14 52 } 67afec157fe63d Šerif Rami 2025-08-14 53 67afec157fe63d Šerif Rami 2025-08-14 @54 if (tascam && atomic_read(&tascam->midi_in_active) && ^^^^^^ Is this required? 67afec157fe63d Šerif Rami 2025-08-14 55 urb->actual_length > 0) { 67afec157fe63d Šerif Rami 2025-08-14 56 kfifo_in_spinlocked(&tascam->midi_in_fifo, urb->transfer_buffer, 67afec157fe63d Šerif Rami 2025-08-14 57 urb->actual_length, &tascam->midi_in_lock); 67afec157fe63d Šerif Rami 2025-08-14 58 schedule_work(&tascam->midi_in_work); 67afec157fe63d Šerif Rami 2025-08-14 59 } 67afec157fe63d Šerif Rami 2025-08-14 60 67afec157fe63d Šerif Rami 2025-08-14 61 usb_get_urb(urb); 67afec157fe63d Šerif Rami 2025-08-14 62 usb_anchor_urb(urb, &tascam->midi_in_anchor); ^^^^^^^^ Unchecked dereference. 67afec157fe63d Šerif Rami 2025-08-14 63 ret = usb_submit_urb(urb, GFP_ATOMIC); 67afec157fe63d Šerif Rami 2025-08-14 64 if (ret < 0) { 67afec157fe63d Šerif Rami 2025-08-14 @65 dev_err(tascam->card->dev, 67afec157fe63d Šerif Rami 2025-08-14 66 "Failed to resubmit MIDI IN URB: error %d\n", ret); 67afec157fe63d Šerif Rami 2025-08-14 67 usb_unanchor_urb(urb); 67afec157fe63d Šerif Rami 2025-08-14 68 usb_put_urb(urb); 67afec157fe63d Šerif Rami 2025-08-14 69 } 67afec157fe63d Šerif Rami 2025-08-14 70 out: 67afec157fe63d Šerif Rami 2025-08-14 71 usb_put_urb(urb); 67afec157fe63d Šerif Rami 2025-08-14 72 } -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki

1 0

Bug 220109 - Audio disappears on HP 15-fc000 after warm boot again
by Kailang 19 Aug '25

19 Aug '25

Hi Takashi, Attach patch will solve issue. BR, Kailang

2 1

[PATCH v2] ALSA: hda/tas2781: Add name prefix tas2781 for tas2781's dvc_tlv and amp_vol_tlv
by Shenghao Ding 18 Aug '25

18 Aug '25

With some new devices adding into the driver, dvc_tlv and amp_vol_tlv will cause confusion for customers on which devices they support. Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver") Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v2: - Put Fixes tag. --- include/sound/tas2781-tlv.h | 6 +++--- sound/hda/codecs/side-codecs/tas2781_hda_i2c.c | 2 +- sound/hda/codecs/side-codecs/tas2781_hda_spi.c | 6 ++++-- sound/soc/codecs/tas2781-i2c.c | 4 ++-- 4 files changed, 10 insertions(+), 8 deletions(-) diff --git a/include/sound/tas2781-tlv.h b/include/sound/tas2781-tlv.h index ef9b9f19d212..273224df9282 100644 --- a/include/sound/tas2781-tlv.h +++ b/include/sound/tas2781-tlv.h @@ -2,7 +2,7 @@ // // ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier // -// Copyright (C) 2022 - 2024 Texas Instruments Incorporated +// Copyright (C) 2022 - 2025 Texas Instruments Incorporated // https://www.ti.com // // The TAS2781 driver implements a flexible and configurable @@ -15,7 +15,7 @@ #ifndef __TAS2781_TLV_H__ #define __TAS2781_TLV_H__ -static const __maybe_unused DECLARE_TLV_DB_SCALE(dvc_tlv, -10000, 50, 0); -static const __maybe_unused DECLARE_TLV_DB_SCALE(amp_vol_tlv, 1100, 50, 0); +static const __maybe_unused DECLARE_TLV_DB_SCALE(tas2781_dvc_tlv, -10000, 50, 0); +static const __maybe_unused DECLARE_TLV_DB_SCALE(tas2781_amp_tlv, 1100, 50, 0); #endif diff --git a/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c b/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c index 3471b9ab52cb..318f8c58ae61 100644 --- a/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c +++ b/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c @@ -269,7 +269,7 @@ static const struct snd_kcontrol_new tas2770_snd_controls[] = { static const struct snd_kcontrol_new tas2781_snd_controls[] = { ACARD_SINGLE_RANGE_EXT_TLV("Speaker Analog Volume", TAS2781_AMP_LEVEL, 1, 0, 20, 0, tas2781_amp_getvol, - tas2781_amp_putvol, amp_vol_tlv), + tas2781_amp_putvol, tas2781_amp_tlv), ACARD_SINGLE_BOOL_EXT("Speaker Force Firmware Load", 0, tas2781_force_fwload_get, tas2781_force_fwload_put), }; diff --git a/sound/hda/codecs/side-codecs/tas2781_hda_spi.c b/sound/hda/codecs/side-codecs/tas2781_hda_spi.c index 09a5d0f131b2..b9a55672bf15 100644 --- a/sound/hda/codecs/side-codecs/tas2781_hda_spi.c +++ b/sound/hda/codecs/side-codecs/tas2781_hda_spi.c @@ -494,9 +494,11 @@ static int tas2781_force_fwload_put(struct snd_kcontrol *kcontrol, static struct snd_kcontrol_new tas2781_snd_ctls[] = { ACARD_SINGLE_RANGE_EXT_TLV(NULL, TAS2781_AMP_LEVEL, 1, 0, 20, 0, - tas2781_amp_getvol, tas2781_amp_putvol, amp_vol_tlv), + tas2781_amp_getvol, tas2781_amp_putvol, + tas2781_amp_tlv), ACARD_SINGLE_RANGE_EXT_TLV(NULL, TAS2781_DVC_LVL, 0, 0, 200, 1, - tas2781_digital_getvol, tas2781_digital_putvol, dvc_tlv), + tas2781_digital_getvol, tas2781_digital_putvol, + tas2781_dvc_tlv), ACARD_SINGLE_BOOL_EXT(NULL, 0, tas2781_force_fwload_get, tas2781_force_fwload_put), }; diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index e4ca43e006db..ea3cdb8553de 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -910,10 +910,10 @@ static const struct snd_kcontrol_new tasdevice_cali_controls[] = { static const struct snd_kcontrol_new tas2781_snd_controls[] = { SOC_SINGLE_RANGE_EXT_TLV("Speaker Analog Volume", TAS2781_AMP_LEVEL, 1, 0, 20, 0, tas2781_amp_getvol, - tas2781_amp_putvol, amp_vol_tlv), + tas2781_amp_putvol, tas2781_amp_tlv), SOC_SINGLE_RANGE_EXT_TLV("Speaker Digital Volume", TAS2781_DVC_LVL, 0, 0, 200, 1, tas2781_digital_getvol, - tas2781_digital_putvol, dvc_tlv), + tas2781_digital_putvol, tas2781_dvc_tlv), }; static const struct snd_kcontrol_new tas2781_cali_controls[] = { -- 2.43.0

2 1

[PATCH v1] ALSA: hda/tas2781: Add name prefix tas2781 for tas2781's dvc_tlv and amp_vol_tlv
by Shenghao Ding 15 Aug '25

15 Aug '25

With some new devices adding into the driver, dvc_tlv and amp_vol_tlv will cause confusion for customers on which devices they support. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- include/sound/tas2781-tlv.h | 6 +++--- sound/hda/codecs/side-codecs/tas2781_hda_i2c.c | 2 +- sound/hda/codecs/side-codecs/tas2781_hda_spi.c | 6 ++++-- sound/soc/codecs/tas2781-i2c.c | 4 ++-- 4 files changed, 10 insertions(+), 8 deletions(-) diff --git a/include/sound/tas2781-tlv.h b/include/sound/tas2781-tlv.h index ef9b9f19d212..273224df9282 100644 --- a/include/sound/tas2781-tlv.h +++ b/include/sound/tas2781-tlv.h @@ -2,7 +2,7 @@ // // ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier // -// Copyright (C) 2022 - 2024 Texas Instruments Incorporated +// Copyright (C) 2022 - 2025 Texas Instruments Incorporated // https://www.ti.com // // The TAS2781 driver implements a flexible and configurable @@ -15,7 +15,7 @@ #ifndef __TAS2781_TLV_H__ #define __TAS2781_TLV_H__ -static const __maybe_unused DECLARE_TLV_DB_SCALE(dvc_tlv, -10000, 50, 0); -static const __maybe_unused DECLARE_TLV_DB_SCALE(amp_vol_tlv, 1100, 50, 0); +static const __maybe_unused DECLARE_TLV_DB_SCALE(tas2781_dvc_tlv, -10000, 50, 0); +static const __maybe_unused DECLARE_TLV_DB_SCALE(tas2781_amp_tlv, 1100, 50, 0); #endif diff --git a/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c b/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c index 3471b9ab52cb..318f8c58ae61 100644 --- a/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c +++ b/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c @@ -269,7 +269,7 @@ static const struct snd_kcontrol_new tas2770_snd_controls[] = { static const struct snd_kcontrol_new tas2781_snd_controls[] = { ACARD_SINGLE_RANGE_EXT_TLV("Speaker Analog Volume", TAS2781_AMP_LEVEL, 1, 0, 20, 0, tas2781_amp_getvol, - tas2781_amp_putvol, amp_vol_tlv), + tas2781_amp_putvol, tas2781_amp_tlv), ACARD_SINGLE_BOOL_EXT("Speaker Force Firmware Load", 0, tas2781_force_fwload_get, tas2781_force_fwload_put), }; diff --git a/sound/hda/codecs/side-codecs/tas2781_hda_spi.c b/sound/hda/codecs/side-codecs/tas2781_hda_spi.c index 09a5d0f131b2..b9a55672bf15 100644 --- a/sound/hda/codecs/side-codecs/tas2781_hda_spi.c +++ b/sound/hda/codecs/side-codecs/tas2781_hda_spi.c @@ -494,9 +494,11 @@ static int tas2781_force_fwload_put(struct snd_kcontrol *kcontrol, static struct snd_kcontrol_new tas2781_snd_ctls[] = { ACARD_SINGLE_RANGE_EXT_TLV(NULL, TAS2781_AMP_LEVEL, 1, 0, 20, 0, - tas2781_amp_getvol, tas2781_amp_putvol, amp_vol_tlv), + tas2781_amp_getvol, tas2781_amp_putvol, + tas2781_amp_tlv), ACARD_SINGLE_RANGE_EXT_TLV(NULL, TAS2781_DVC_LVL, 0, 0, 200, 1, - tas2781_digital_getvol, tas2781_digital_putvol, dvc_tlv), + tas2781_digital_getvol, tas2781_digital_putvol, + tas2781_dvc_tlv), ACARD_SINGLE_BOOL_EXT(NULL, 0, tas2781_force_fwload_get, tas2781_force_fwload_put), }; diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index e4ca43e006db..ea3cdb8553de 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -910,10 +910,10 @@ static const struct snd_kcontrol_new tasdevice_cali_controls[] = { static const struct snd_kcontrol_new tas2781_snd_controls[] = { SOC_SINGLE_RANGE_EXT_TLV("Speaker Analog Volume", TAS2781_AMP_LEVEL, 1, 0, 20, 0, tas2781_amp_getvol, - tas2781_amp_putvol, amp_vol_tlv), + tas2781_amp_putvol, tas2781_amp_tlv), SOC_SINGLE_RANGE_EXT_TLV("Speaker Digital Volume", TAS2781_DVC_LVL, 0, 0, 200, 1, tas2781_digital_getvol, - tas2781_digital_putvol, dvc_tlv), + tas2781_digital_putvol, tas2781_dvc_tlv), }; static const struct snd_kcontrol_new tas2781_cali_controls[] = { -- 2.43.0

2 1