June 2025 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] ASoC TDM channel re-mapping
by Edward Cragg 17 Jun '25

17 Jun '25

Hi, We have an ASoC driver in which we have added support for TDM over an I2S interface. We would like to have the capability of re-mapping the channel ordering, for which i know there is a callback in place to start this process, set_channel_map. The only backend implementation of this is using the ALSA API and the .copy handler in an ALSA PCM driver to mutate data copied out of ALSA before it's DMA'd to hardware. This is in sound/soc/blackfin/bf5xx-i2s-pcm.c The problem we have is that the driver we're using currently uses a dmaengine based PCM driver, and i'm not sure whether this is compatible with using the .copy callback, without reimplementing the driver entirely as an ALSA PCM driver. Since there aren't very many examples in mainline, I was hoping to ask for advice for the best way of doing this. I wondered: - Would it be possible to add a functional copy callback using a dmaengine based PCM driver? - Otherwise, would there be a good way to implement channel remapping in a TDM frame using the dmaengine based PCM driver? or - Would the best way indeed be to reimplement the PCM driver as a normal ALSA PCM driver? Thanks, Ed Cragg

2 2

[PATCH] ASoC: qcom: soundwire: Add support for controlling audio CGCR from HLOS
by Srinivasa Rao Mandadapu 17 Jun '25

17 Jun '25

Add support for controlling soundwire audio CGCR interface using clock framework to make hclk ungating with software. As per new hardware changes, software has to always ungate hclk if soundwire is operational and keep it running. This requirement is for latest LPASS chipsets for RX, TX and WSA path to work. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam(a)quicinc.com> Co-developed-by: Venkata Prasad Potturu <quic_potturu(a)quicinc.com> Signed-off-by: Venkata Prasad Potturu <quic_potturu(a)quicinc.com> --- This patch set depends on: -- Clock driver patches with reset control support, yet to be posted. drivers/soundwire/qcom.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index fb183bd..440aad8 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -12,6 +12,7 @@ #include <linux/of_irq.h> #include <linux/of_device.h> #include <linux/regmap.h> +#include <linux/reset.h> #include <linux/slab.h> #include <linux/slimbus.h> #include <linux/soundwire/sdw.h> @@ -129,6 +130,7 @@ struct qcom_swrm_ctrl { struct device *dev; struct regmap *regmap; void __iomem *mmio; + struct reset_control *audio_cgcr; #ifdef CONFIG_DEBUG_FS struct dentry *debugfs; #endif @@ -618,6 +620,8 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl) val = FIELD_PREP(SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_BMSK, ctrl->rows_index); val |= FIELD_PREP(SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_BMSK, ctrl->cols_index); + reset_control_reset(ctrl->audio_cgcr); + ctrl->reg_write(ctrl, SWRM_MCP_FRAME_CTRL_BANK_ADDR(0), val); /* Enable Auto enumeration */ @@ -1269,6 +1273,9 @@ static int qcom_swrm_probe(struct platform_device *pdev) ctrl->bus.ops = &qcom_swrm_ops; ctrl->bus.port_ops = &qcom_swrm_port_ops; ctrl->bus.compute_params = &qcom_swrm_compute_params; + ctrl->audio_cgcr = devm_reset_control_get_exclusive(dev, "swr_audio_cgcr"); + if (IS_ERR(ctrl->audio_cgcr)) + dev_err(dev, "Failed to get audio_cgcr reset required for soundwire-v1.6.0\n"); ret = qcom_swrm_get_port_config(ctrl); if (ret) -- 2.7.4

2 3

[PATCH] ASoC: qcom: x1e80100: Support boards with two speakers
by Krzysztof Kozlowski 17 Jun '25

17 Jun '25

Some Qualcomm X1E laptops have only two speakers. Regardless whether this sound card driver is suitable for them (we could re-use one for some older SoC), we should set reasonable channel map depending on the number of channels, not always 4-speaker setup. This change is necessary for bringing audio support on Lenovo Thinkpad T14s with Qualcomm X1E78100 and only two speakers. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- sound/soc/qcom/x1e80100.c | 40 ++++++++++++++++++++++++++++++++++----- 1 file changed, 35 insertions(+), 5 deletions(-) diff --git a/sound/soc/qcom/x1e80100.c b/sound/soc/qcom/x1e80100.c index 898b5c26bf1e..8eb57fc12f0d 100644 --- a/sound/soc/qcom/x1e80100.c +++ b/sound/soc/qcom/x1e80100.c @@ -95,23 +95,53 @@ static int x1e80100_snd_hw_params(struct snd_pcm_substream *substream, return qcom_snd_sdw_hw_params(substream, params, &data->sruntime[cpu_dai->id]); } +static int x1e80100_snd_hw_map_channels(unsigned int *ch_map, int num) +{ + switch (num) { + case 1: + ch_map[0] = PCM_CHANNEL_FC; + break; + case 2: + ch_map[0] = PCM_CHANNEL_FL; + ch_map[1] = PCM_CHANNEL_FR; + break; + case 3: + ch_map[0] = PCM_CHANNEL_FL; + ch_map[1] = PCM_CHANNEL_FR; + ch_map[2] = PCM_CHANNEL_FC; + break; + case 4: + ch_map[0] = PCM_CHANNEL_FL; + ch_map[1] = PCM_CHANNEL_LB; + ch_map[2] = PCM_CHANNEL_FR; + ch_map[3] = PCM_CHANNEL_RB; + break; + default: + return -EINVAL; + } + + return 0; +} + static int x1e80100_snd_prepare(struct snd_pcm_substream *substream) { struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream); struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0); struct x1e80100_snd_data *data = snd_soc_card_get_drvdata(rtd->card); struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id]; - const unsigned int rx_slot[4] = { PCM_CHANNEL_FL, - PCM_CHANNEL_LB, - PCM_CHANNEL_FR, - PCM_CHANNEL_RB }; + unsigned int channels = substream->runtime->channels; + unsigned int rx_slot[4]; int ret; switch (cpu_dai->id) { case WSA_CODEC_DMA_RX_0: case WSA_CODEC_DMA_RX_1: + ret = x1e80100_snd_hw_map_channels(rx_slot, channels); + if (ret) + return ret; + ret = snd_soc_dai_set_channel_map(cpu_dai, 0, NULL, - ARRAY_SIZE(rx_slot), rx_slot); + channels, rx_slot); if (ret) return ret; break; -- 2.43.0

2 1

[alsa-devel] Applied "ASoC: tlv320aic32x4: Model CODEC_CLKIN in CCF" to the asoc tree
by Mark Brown 17 Jun '25

17 Jun '25

The patch ASoC: tlv320aic32x4: Model CODEC_CLKIN in CCF has been applied to the asoc tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From fd2df3aeafa4b4cc468d58e147e0822967034b71 Mon Sep 17 00:00:00 2001 From: Annaliese McDermond <nh6z(a)nh6z.net> Date: Thu, 21 Mar 2019 17:58:46 -0700 Subject: [PATCH] ASoC: tlv320aic32x4: Model CODEC_CLKIN in CCF Model and manage codec clock input as a component in the Core Clock Framework. This should allow us to do some more complex clock management and power control. Also, some of the on-board chip clocks can be exposed to the outside, and this change will make those clocks easier to consume by other parts of the kernel. Signed-off-by: Annaliese McDermond <nh6z(a)nh6z.net> Signed-off-by: Mark Brown <broonie(a)kernel.org> --- sound/soc/codecs/tlv320aic32x4-clk.c | 34 ++++++++++++++++++++++++++++ sound/soc/codecs/tlv320aic32x4.c | 18 +++++++++++---- 2 files changed, 47 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/tlv320aic32x4-clk.c b/sound/soc/codecs/tlv320aic32x4-clk.c index 5e495fc8d931..cded85009c8c 100644 --- a/sound/soc/codecs/tlv320aic32x4-clk.c +++ b/sound/soc/codecs/tlv320aic32x4-clk.c @@ -265,6 +265,30 @@ static const struct clk_ops aic32x4_pll_ops = { .get_parent = clk_aic32x4_pll_get_parent, }; +static int clk_aic32x4_codec_clkin_set_parent(struct clk_hw *hw, u8 index) +{ + struct clk_aic32x4 *mux = to_clk_aic32x4(hw); + + return regmap_update_bits(mux->regmap, + AIC32X4_CLKMUX, + AIC32X4_CODEC_CLKIN_MASK, index << AIC32X4_CODEC_CLKIN_SHIFT); +} + +static u8 clk_aic32x4_codec_clkin_get_parent(struct clk_hw *hw) +{ + struct clk_aic32x4 *mux = to_clk_aic32x4(hw); + unsigned int val; + + regmap_read(mux->regmap, AIC32X4_CLKMUX, &val); + + return (val & AIC32X4_CODEC_CLKIN_MASK) >> AIC32X4_CODEC_CLKIN_SHIFT; +} + +static const struct clk_ops aic32x4_codec_clkin_ops = { + .set_parent = clk_aic32x4_codec_clkin_set_parent, + .get_parent = clk_aic32x4_codec_clkin_get_parent, +}; + static struct aic32x4_clkdesc aic32x4_clkdesc_array[] = { { .name = "pll", @@ -274,6 +298,14 @@ static struct aic32x4_clkdesc aic32x4_clkdesc_array[] = { .ops = &aic32x4_pll_ops, .reg = 0, }, + { + .name = "codec_clkin", + .parent_names = + (const char *[]) { "mclk", "bclk", "gpio", "pll" }, + .num_parents = 4, + .ops = &aic32x4_codec_clkin_ops, + .reg = 0, + }, }; static struct clk *aic32x4_register_clk(struct device *dev, @@ -314,6 +346,8 @@ int aic32x4_register_clocks(struct device *dev, const char *mclk_name) */ aic32x4_clkdesc_array[0].parent_names = (const char* []) { mclk_name, "bclk", "gpio", "din" }; + aic32x4_clkdesc_array[1].parent_names = + (const char *[]) { mclk_name, "bclk", "gpio", "pll" }; for (i = 0; i < ARRAY_SIZE(aic32x4_clkdesc_array); ++i) aic32x4_register_clk(dev, &aic32x4_clkdesc_array[i]); diff --git a/sound/soc/codecs/tlv320aic32x4.c b/sound/soc/codecs/tlv320aic32x4.c index 7cf8c7cedfe1..5496e4e080f4 100644 --- a/sound/soc/codecs/tlv320aic32x4.c +++ b/sound/soc/codecs/tlv320aic32x4.c @@ -735,12 +735,9 @@ static int aic32x4_setup_clocks(struct snd_soc_component *component, aic32x4_set_processing_blocks(component, aic32x4_divs[i].r_block, aic32x4_divs[i].p_block); - /* PLL as CODEC_CLKIN */ - snd_soc_component_update_bits(component, AIC32X4_CLKMUX, - AIC32X4_CODEC_CLKIN_MASK, - AIC32X4_CODEC_CLKIN_PLL << AIC32X4_CODEC_CLKIN_SHIFT); /* DAC_MOD_CLK as BDIV_CLKIN */ - snd_soc_component_update_bits(component, AIC32X4_IFACE3, AIC32X4_BDIVCLK_MASK, + snd_soc_component_update_bits(component, AIC32X4_IFACE3, + AIC32X4_BDIVCLK_MASK, AIC32X4_DACMOD2BCLK << AIC32X4_BDIVCLK_SHIFT); /* NDAC divider value */ @@ -987,6 +984,15 @@ static int aic32x4_component_probe(struct snd_soc_component *component) { struct aic32x4_priv *aic32x4 = snd_soc_component_get_drvdata(component); u32 tmp_reg; + int ret; + + struct clk_bulk_data clocks[] = { + { .id = "codec_clkin" }, + }; + + ret = devm_clk_bulk_get(component->dev, ARRAY_SIZE(clocks), clocks); + if (ret) + return ret; if (gpio_is_valid(aic32x4->rstn_gpio)) { ndelay(10); @@ -999,6 +1005,8 @@ static int aic32x4_component_probe(struct snd_soc_component *component) if (aic32x4->setup) aic32x4_setup_gpios(component); + clk_set_parent(clocks[0].clk, clocks[1].clk); + /* Power platform configuration */ if (aic32x4->power_cfg & AIC32X4_PWR_MICBIAS_2075_LDOIN) { snd_soc_component_write(component, AIC32X4_MICBIAS, -- 2.20.1

2 1

[PATCH] ASoC: amd: acp: Fix support for a Huawei Matebook laptop
by Marian Postevca 17 Jun '25

17 Jun '25

Previous commit that added support for Huawei MateBook D16 2021 with Ryzen 4600H (HVY-WXX9 M1010) was incomplete. To activate support for this laptop, the DMI table in acp3x-es83xx machine driver must also be updated. Fixes: b5338b1b901e ("ASoC: amd: acp: Add support for a new Huawei Matebook laptop") Signed-off-by: Marian Postevca <posteuca(a)mutex.one> --- sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c b/sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c index f85b85ea4be9..2b0aa270a3e9 100644 --- a/sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c +++ b/sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c @@ -354,6 +354,14 @@ static const struct dmi_system_id acp3x_es83xx_dmi_table[] = { }, .driver_data = (void *)(ES83XX_ENABLE_DMIC|ES83XX_48_MHZ_MCLK), }, + { + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "HUAWEI"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HVY-WXX9"), + DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "M1010"), + }, + .driver_data = (void *)(ES83XX_ENABLE_DMIC), + }, { .matches = { DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "HUAWEI"), -- 2.43.0

2 1

[PATCH v1] ASoC: tas2781: Move the "include linux/debugfs.h" into tas2781.h
by Shenghao Ding 16 Jun '25

16 Jun '25

Move the include linux/debugfs.h into tas2781.h for code clean. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- include/sound/tas2781.h | 4 ++++ sound/soc/codecs/tas2781-i2c.c | 3 --- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h index 40cd3bd079b5..3875e92f1ec5 100644 --- a/include/sound/tas2781.h +++ b/include/sound/tas2781.h @@ -17,6 +17,10 @@ #ifndef __TAS2781_H__ #define __TAS2781_H__ +#ifdef CONFIG_SND_SOC_TAS2781_ACOUST_I2C +#include <linux/debugfs.h> +#endif + #include "tas2781-dsp.h" /* version number */ diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index c40d8f754d89..9f4d965a1335 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -14,9 +14,6 @@ // #include <linux/crc8.h> -#ifdef CONFIG_SND_SOC_TAS2781_ACOUST_I2C -#include <linux/debugfs.h> -#endif #include <linux/firmware.h> #include <linux/gpio/consumer.h> #include <linux/i2c.h> -- 2.43.0

3 2

add UCM2 support for MSI MAG B850M Mortar Wifi (ALC4080)
by GitHub pull_request - opened 16 Jun '25

16 Jun '25

alsa-project/alsa-ucm-conf pull request #581 was opened from DanielDecker: Solves problems with front panel audio and S/PDIF sound output for MSI MAG B850M Mortar Wifi, which uses the Realtek ALC4080 audio chip. I also tested line in (back side) and microphone input (front panel). [alsa-info.txt](https://alsa-project.org/db/?f=70ed25ea247c3ac8c253755a5c70e… Thanks in advance. Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/581 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/581.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH] ASoC: Intel: Replace deprecated strcpy() with strscpy()
by Sachin Mokashi 16 Jun '25

16 Jun '25

strcpy() is deprecated, use strscpy() instead. As strcpy() performs no bounds checking on the destination buffer. This could result in buffer overflow. The safe replacement is strscpy(). Link: https://github.com/KSPP/linux/issues/88 Signed-off-by: Sachin Mokashi <sachin.mokashi(a)intel.com> --- sound/soc/intel/boards/cht_bsw_rt5672.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/intel/boards/cht_bsw_rt5672.c b/sound/soc/intel/boards/cht_bsw_rt5672.c index aaef212cf44e..54c1894ee96a 100644 --- a/sound/soc/intel/boards/cht_bsw_rt5672.c +++ b/sound/soc/intel/boards/cht_bsw_rt5672.c @@ -14,6 +14,7 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/clk.h> +#include <linux/string.h> #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> @@ -458,7 +459,7 @@ static int snd_cht_mc_probe(struct platform_device *pdev) if (!drv) return -ENOMEM; - strcpy(drv->codec_name, RT5672_I2C_DEFAULT); + strscpy(drv->codec_name, RT5672_I2C_DEFAULT, sizeof(drv->codec_name)); /* find index of codec dai */ for (i = 0; i < ARRAY_SIZE(cht_dailink); i++) { -- 2.34.1 Intel Deutschland GmbH Registered Address: Am Campeon 10, 85579 Neubiberg, Germany Tel: +49 89 99 8853-0, www.intel.de Managing Directors: Sean Fennelly, Jeffrey Schneiderman, Tiffany Doon Silva Chairperson of the Supervisory Board: Nicole Lau Registered Office: Munich Commercial Register: Amtsgericht Muenchen HRB 186928

3 2

[PATCH] ALSA: hda/realtek: Fixup ft alc257 rename alc3328
by wangdicheng 16 Jun '25

16 Jun '25

Audio ALC3328 recognized as ALC257, updated PCI ID0x10EC12F0 to rename it to 3328 Signed-off-by: wangdicheng <wangdicheng(a)kylinos.cn> --- sound/pci/hda/patch_realtek.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index d3c9ed963588..e18b2a2acba8 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6712,6 +6712,13 @@ static void alc_fixup_disable_mic_vref(struct hda_codec *codec, snd_hda_codec_set_pin_target(codec, 0x19, PIN_VREFHIZ); } +static void alc_fixup_ft_alc257_rename(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + int err; + if (action == HDA_FIXUP_ACT_PRE_PROBE) + err = alc_codec_rename(codec, "ALC3328"); +} static void alc294_gx502_toggle_output(struct hda_codec *codec, struct hda_jack_callback *cb) @@ -7799,6 +7806,7 @@ enum { ALC269_FIXUP_VAIO_VJFH52_MIC_NO_PRESENCE, ALC233_FIXUP_MEDION_MTL_SPK, ALC294_FIXUP_BASS_SPEAKER_15, + ALC257_FIXUP_FT_RENAME, }; /* A special fixup for Lenovo C940 and Yoga Duet 7; @@ -10143,6 +10151,10 @@ static const struct hda_fixup alc269_fixups[] = { .type = HDA_FIXUP_FUNC, .v.func = alc294_fixup_bass_speaker_15, }, + [ALC257_FIXUP_FT_RENAME] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc_fixup_ft_alc257_rename, + }, }; static const struct hda_quirk alc269_fixup_tbl[] = { @@ -10715,6 +10727,7 @@ static const struct hda_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x10cf, 0x1757, "Lifebook E752", ALC269_FIXUP_LIFEBOOK_HP_PIN), SND_PCI_QUIRK(0x10cf, 0x1845, "Lifebook U904", ALC269_FIXUP_LIFEBOOK_EXTMIC), SND_PCI_QUIRK(0x10ec, 0x10f2, "Intel Reference board", ALC700_FIXUP_INTEL_REFERENCE), + SND_PCI_QUIRK(0x10ec, 0x12f0, "BXC NF271B FT board", ALC257_FIXUP_FT_RENAME), SND_PCI_QUIRK(0x10ec, 0x118c, "Medion EE4254 MD62100", ALC256_FIXUP_MEDION_HEADSET_NO_PRESENCE), SND_PCI_QUIRK(0x10ec, 0x119e, "Positivo SU C1400", ALC269_FIXUP_ASPIRE_HEADSET_MIC), SND_PCI_QUIRK(0x10ec, 0x11bc, "VAIO VJFE-IL", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), -- 2.25.1

2 1

[PATCH v1] ALSA: hda/tas2781: Add compatible for hardware id TIAS2781 and TXNW2781
by Baojun Xu 16 Jun '25

16 Jun '25

TIAS2781 is unofficial hardware id in ACPI for tas2781 in HDA, has been used for several projects. TXNW is the official hardware id for TI, will be used in new projects, including device on SPI bus, which was enumerated by drivers/acpi/scan.c, and probed by smi_probe() in drivers/platform/x86/serial-multi-instantiate.c. This patch will support both TIAS2781 and TXNW2781 in ACPI with tas2781 under HDA. As our I2C driver will handle all of slaver devices, so we probe first device only: "TXNW2781:00-tas2781-hda.0" Signed-off-by: Baojun Xu <baojun.xu(a)ti.com> --- sound/pci/hda/patch_realtek.c | 21 +++++++++++++++++---- sound/pci/hda/tas2781_hda_i2c.c | 6 ++++++ 2 files changed, 23 insertions(+), 4 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index bca725bb8..c5ef5e35e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7323,7 +7323,7 @@ static void alc285_fixup_asus_ga403u(struct hda_codec *cdc, const struct hda_fix alc_fixup_inv_dmic(cdc, fix, action); } -static void tas2781_fixup_i2c(struct hda_codec *cdc, +static void tas2781_fixup_tias_i2c(struct hda_codec *cdc, const struct hda_fixup *fix, int action) { comp_generic_fixup(cdc, action, "i2c", "TIAS2781", "-%s:00", 1); @@ -7334,6 +7334,12 @@ static void tas2781_fixup_spi(struct hda_codec *cdc, const struct hda_fixup *fix comp_generic_fixup(cdc, action, "spi", "TXNW2781", "-%s:00-tas2781-hda.%d", 2); } +static void tas2781_fixup_txnw_i2c(struct hda_codec *cdc, + const struct hda_fixup *fix, int action) +{ + comp_generic_fixup(cdc, action, "i2c", "TXNW2781", "-%s:00-tas2781-hda.%d", 1); +} + static void yoga7_14arb7_fixup_i2c(struct hda_codec *cdc, const struct hda_fixup *fix, int action) { @@ -8001,6 +8007,7 @@ enum { ALC287_FIXUP_CS35L41_I2C_2_THINKPAD_ACPI, ALC287_FIXUP_TAS2781_I2C, ALC245_FIXUP_TAS2781_SPI_2, + ALC287_FIXUP_TXNW2781_I2C, ALC287_FIXUP_YOGA7_14ARB7_I2C, ALC245_FIXUP_HP_MUTE_LED_COEFBIT, ALC245_FIXUP_HP_MUTE_LED_V1_COEFBIT, @@ -10251,7 +10258,7 @@ static const struct hda_fixup alc269_fixups[] = { }, [ALC287_FIXUP_TAS2781_I2C] = { .type = HDA_FIXUP_FUNC, - .v.func = tas2781_fixup_i2c, + .v.func = tas2781_fixup_tias_i2c, .chained = true, .chain_id = ALC285_FIXUP_THINKPAD_HEADSET_JACK, }, @@ -10261,6 +10268,12 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC285_FIXUP_HP_GPIO_LED, }, + [ALC287_FIXUP_TXNW2781_I2C] = { + .type = HDA_FIXUP_FUNC, + .v.func = tas2781_fixup_txnw_i2c, + .chained = true, + .chain_id = ALC285_FIXUP_THINKPAD_HEADSET_JACK, + }, [ALC287_FIXUP_YOGA7_14ARB7_I2C] = { .type = HDA_FIXUP_FUNC, .v.func = yoga7_14arb7_fixup_i2c, @@ -11322,8 +11335,8 @@ static const struct hda_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x3902, "Lenovo E50-80", ALC269_FIXUP_DMIC_THINKPAD_ACPI), SND_PCI_QUIRK(0x17aa, 0x390d, "Lenovo Yoga Pro 7 14ASP10", ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK_PIN), SND_PCI_QUIRK(0x17aa, 0x3913, "Lenovo 145", ALC236_FIXUP_LENOVO_INV_DMIC), - SND_PCI_QUIRK(0x17aa, 0x391f, "Yoga S990-16 pro Quad YC Quad", ALC287_FIXUP_TAS2781_I2C), - SND_PCI_QUIRK(0x17aa, 0x3920, "Yoga S990-16 pro Quad VECO Quad", ALC287_FIXUP_TAS2781_I2C), + SND_PCI_QUIRK(0x17aa, 0x391f, "Yoga S990-16 pro Quad YC Quad", ALC287_FIXUP_TXNW2781_I2C), + SND_PCI_QUIRK(0x17aa, 0x3920, "Yoga S990-16 pro Quad VECO Quad", ALC287_FIXUP_TXNW2781_I2C), SND_PCI_QUIRK(0x17aa, 0x3977, "IdeaPad S210", ALC283_FIXUP_INT_MIC), SND_PCI_QUIRK(0x17aa, 0x3978, "Lenovo B50-70", ALC269_FIXUP_DMIC_THINKPAD_ACPI), SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_FIXUP_PCM_44K), diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c index eb2295b49..b9cdbca95 100644 --- a/sound/pci/hda/tas2781_hda_i2c.c +++ b/sound/pci/hda/tas2781_hda_i2c.c @@ -587,6 +587,11 @@ static int tas2781_hda_i2c_probe(struct i2c_client *clt) device_name = "TIAS2781"; hda_priv->save_calibration = tas2781_save_calibration; tas_hda->priv->global_addr = TAS2781_GLOBAL_ADDR; + } else if (strstarts(dev_name(&clt->dev), + "TXNW2781:00-tas2781-hda.0")) { + device_name = "TXNW2781"; + hda_priv->save_calibration = tas2781_save_calibration; + tas_hda->priv->global_addr = TAS2781_GLOBAL_ADDR; } else if (strstr(dev_name(&clt->dev), "INT8866")) { device_name = "INT8866"; hda_priv->save_calibration = tas2563_save_calibration; @@ -725,6 +730,7 @@ static const struct i2c_device_id tas2781_hda_i2c_id[] = { static const struct acpi_device_id tas2781_acpi_hda_match[] = { {"INT8866", 0 }, {"TIAS2781", 0 }, + {"TXNW2781", 0 }, {} }; MODULE_DEVICE_TABLE(acpi, tas2781_acpi_hda_match); -- 2.43.0

2 1