March 2025 - Alsa-devel - mailman.alsa-project.org

Add UCM2 support for ASUS ROG Strix B850-I Gaming WiFi
by GitHub pull_request - edited 28 Mar '25

28 Mar '25

alsa-project/alsa-ucm-conf pull request #537 was edited from austinthiel: Referenced [this guide](https://askubuntu.com/a/1469066) to get SPDIF out working on my ASUS B850-I Gaming WiFi [alsa-info.txt](https://github.com/user-attachments/files/19499096/alsa-info… In case it's relevant, using a sample rate of 48kHz is required. I found that other sample rate produces very low quality, garbled audio. Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/537 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/537.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Add UCM2 support for ASUS ROG Strix B850-I Gaming WiFi
by GitHub pull_request - opened 28 Mar '25

28 Mar '25

alsa-project/alsa-ucm-conf pull request #537 was opened from austinthiel: Referenced [this guide](https://askubuntu.com/a/1469066) to get SPDIF out working on my ASUS B850-I Gaming WiFi [alsa-info.txt](https://github.com/user-attachments/files/19498803/alsa-info… In case it's relevant, using a sample rate of 48kHz is required. I found that other sample rate produces very low quality, garbled audio. Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/537 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/537.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

USB-Audio Add Roland BridgeCast One USB-Audio.conf
by GitHub pull_request - opened 27 Mar '25

27 Mar '25

alsa-project/alsa-ucm-conf pull request #536 was opened from Simon99de: Add Roland BridgeCast One uses the same config as the bridge cast v2 as it has the same outputs and it worked in my test. 0582:030d Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/536 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/536.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

USB-Audio: ALC4080 - add rear microphone support for 0414:a014
by GitHub pull_request - opened 26 Mar '25

26 Mar '25

alsa-project/alsa-ucm-conf pull request #535 was opened from perexg: 0414:a014 Gigabyte B850I Aorus Pro (rev 1.0) Link: https://github.com/alsa-project/alsa-ucm-conf/issues/528 Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/535 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/535.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH 2/3] ASoC: amd: use new ACP dev names for DAI links
by Brady Norander 26 Mar '25

26 Mar '25

The old names used automatic platform device ids, which means they could change. Use the new device names which will never change. Depends on patch: drm/amdgpu: use static ids for ACP platform devs [1] [1] https://lore.kernel.org/all/20250325210517.2097188-1-bradynorander@gmail.co… Signed-off-by: Brady Norander <bradynorander(a)gmail.com> --- sound/soc/amd/acp-da7219-max98357a.c | 8 ++++---- sound/soc/amd/acp-es8336.c | 4 ++-- sound/soc/amd/acp-rt5645.c | 6 +++--- 3 files changed, 9 insertions(+), 9 deletions(-) diff --git a/sound/soc/amd/acp-da7219-max98357a.c b/sound/soc/amd/acp-da7219-max98357a.c index 02b04f355ca6..42aa009c4e13 100644 --- a/sound/soc/amd/acp-da7219-max98357a.c +++ b/sound/soc/amd/acp-da7219-max98357a.c @@ -517,11 +517,11 @@ static const struct snd_soc_ops cz_rt5682_dmic1_cap_ops = { }; SND_SOC_DAILINK_DEF(designware1, - DAILINK_COMP_ARRAY(COMP_CPU("designware-i2s.1.auto"))); + DAILINK_COMP_ARRAY(COMP_CPU("designware-i2s.1"))); SND_SOC_DAILINK_DEF(designware2, - DAILINK_COMP_ARRAY(COMP_CPU("designware-i2s.2.auto"))); + DAILINK_COMP_ARRAY(COMP_CPU("designware-i2s.2"))); SND_SOC_DAILINK_DEF(designware3, - DAILINK_COMP_ARRAY(COMP_CPU("designware-i2s.3.auto"))); + DAILINK_COMP_ARRAY(COMP_CPU("designware-i2s.3"))); SND_SOC_DAILINK_DEF(dlgs, DAILINK_COMP_ARRAY(COMP_CODEC("i2c-DLGS7219:00", "da7219-hifi"))); @@ -533,7 +533,7 @@ SND_SOC_DAILINK_DEF(adau, DAILINK_COMP_ARRAY(COMP_CODEC("ADAU7002:00", "adau7002-hifi"))); SND_SOC_DAILINK_DEF(platform, - DAILINK_COMP_ARRAY(COMP_PLATFORM("acp_audio_dma.0.auto"))); + DAILINK_COMP_ARRAY(COMP_PLATFORM("acp_audio_dma.0"))); static struct snd_soc_dai_link cz_dai_7219_98357[] = { { diff --git a/sound/soc/amd/acp-es8336.c b/sound/soc/amd/acp-es8336.c index 0193b3eae7a6..b16dde0e2987 100644 --- a/sound/soc/amd/acp-es8336.c +++ b/sound/soc/amd/acp-es8336.c @@ -137,11 +137,11 @@ static const struct snd_soc_ops st_es8336_ops = { }; SND_SOC_DAILINK_DEF(designware1, - DAILINK_COMP_ARRAY(COMP_CPU("designware-i2s.2.auto"))); + DAILINK_COMP_ARRAY(COMP_CPU("designware-i2s.1"))); SND_SOC_DAILINK_DEF(codec, DAILINK_COMP_ARRAY(COMP_CODEC("i2c-ESSX8336:00", "ES8316 HiFi"))); SND_SOC_DAILINK_DEF(platform, - DAILINK_COMP_ARRAY(COMP_PLATFORM("acp_audio_dma.1.auto"))); + DAILINK_COMP_ARRAY(COMP_PLATFORM("acp_audio_dma.0"))); static struct snd_soc_dai_link st_dai_es8336[] = { { diff --git a/sound/soc/amd/acp-rt5645.c b/sound/soc/amd/acp-rt5645.c index 72ddad24dbda..11d373169380 100644 --- a/sound/soc/amd/acp-rt5645.c +++ b/sound/soc/amd/acp-rt5645.c @@ -108,15 +108,15 @@ static const struct snd_soc_ops cz_aif1_ops = { }; SND_SOC_DAILINK_DEF(designware1, - DAILINK_COMP_ARRAY(COMP_CPU("designware-i2s.1.auto"))); + DAILINK_COMP_ARRAY(COMP_CPU("designware-i2s.1"))); SND_SOC_DAILINK_DEF(designware2, - DAILINK_COMP_ARRAY(COMP_CPU("designware-i2s.2.auto"))); + DAILINK_COMP_ARRAY(COMP_CPU("designware-i2s.2"))); SND_SOC_DAILINK_DEF(codec, DAILINK_COMP_ARRAY(COMP_CODEC("i2c-10EC5650:00", "rt5645-aif1"))); SND_SOC_DAILINK_DEF(platform, - DAILINK_COMP_ARRAY(COMP_PLATFORM("acp_audio_dma.0.auto"))); + DAILINK_COMP_ARRAY(COMP_PLATFORM("acp_audio_dma.0"))); static struct snd_soc_dai_link cz_dai_rt5650[] = { { -- 2.49.0

2 2

[PATCH 3/3] ASoC: dwc: always enable/disable i2s irqs
by Brady Norander 26 Mar '25

26 Mar '25

Commit a42e988 ("ASoC: dwc: add DMA handshake control") changed the behavior of the driver to not enable or disable i2s irqs if using DMA. This breaks platforms such as AMD ACP. Revert to the old behavior by always enabling and disabling i2s irqs while keeping DMA handshake control. Fixes: a42e988 ("ASoC: dwc: add DMA handshake control") Signed-off-by: Brady Norander <bradynorander(a)gmail.com> --- sound/soc/dwc/dwc-i2s.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/sound/soc/dwc/dwc-i2s.c b/sound/soc/dwc/dwc-i2s.c index 57b789d7fbed..5b4f20dbf7bb 100644 --- a/sound/soc/dwc/dwc-i2s.c +++ b/sound/soc/dwc/dwc-i2s.c @@ -199,12 +199,10 @@ static void i2s_start(struct dw_i2s_dev *dev, else i2s_write_reg(dev->i2s_base, IRER, 1); - /* I2S needs to enable IRQ to make a handshake with DMAC on the JH7110 SoC */ - if (dev->use_pio || dev->is_jh7110) - i2s_enable_irqs(dev, substream->stream, config->chan_nr); - else + if (!(dev->use_pio || dev->is_jh7110)) i2s_enable_dma(dev, substream->stream); + i2s_enable_irqs(dev, substream->stream, config->chan_nr); i2s_write_reg(dev->i2s_base, CER, 1); } @@ -218,11 +216,12 @@ static void i2s_stop(struct dw_i2s_dev *dev, else i2s_write_reg(dev->i2s_base, IRER, 0); - if (dev->use_pio || dev->is_jh7110) - i2s_disable_irqs(dev, substream->stream, 8); - else + if (!(dev->use_pio || dev->is_jh7110)) i2s_disable_dma(dev, substream->stream); + i2s_disable_irqs(dev, substream->stream, 8); + + if (!dev->active) { i2s_write_reg(dev->i2s_base, CER, 0); i2s_write_reg(dev->i2s_base, IER, 0); -- 2.49.0

2 1

No output when selecting S/PDIF on Asus B850-I with Realtek ALC4080
by GitHub issues - opened 26 Mar '25

26 Mar '25

alsa-project/alsa-ucm-conf issue #534 was opened from bcrescimanno: Motherobard site: https://rog.asus.com/us/motherboards/rog-strix/rog-strix-b850-i-gaming-wifi/ I get no output from the S/PDIF port on this motherboard. I'm able to workaround it using `pavucontrol` and switching the USB Audio device to the "Pro Audio" configuration and then choosing "USB Pro Audio 2" as the output device. Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/534 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

DRAFT: HDA: Handle better Bass speaker including 4 channel mode
by GitHub pull_request - edited 25 Mar '25

25 Mar '25

alsa-project/alsa-ucm-conf pull request #533 was edited from perexg: It's a follow up of #410 . Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/533 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/533.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

HDA: Handle better Bass speaker including 4 channel mode
by GitHub pull_request - opened 25 Mar '25

25 Mar '25

alsa-project/alsa-ucm-conf pull request #533 was opened from perexg: It's a follow up of #410 . Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/533 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/533.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH v1] ALSA: hda/tas2781: Support dsp firmware Alpha and Beta seaies
by Shenghao Ding 25 Mar '25

25 Mar '25

For calibration data, basic version firmware does not contain any calibration addresses, it depends on calibration tool to convey the addresses to the driver. Since Alpha and Beta firmware, all the calibration addresses are saved into the firmware. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v1: - Add updating calibration addresses code into tas2781_apply_calib in case of Alpha and Beta firmware. --- sound/pci/hda/tas2781_hda_i2c.c | 30 ++++++++++++++++++++---------- 1 file changed, 20 insertions(+), 10 deletions(-) diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c index 50c5e5f26589..cb3d683013d9 100644 --- a/sound/pci/hda/tas2781_hda_i2c.c +++ b/sound/pci/hda/tas2781_hda_i2c.c @@ -558,28 +558,38 @@ static int tas2563_save_calibration(struct tasdevice_priv *tas_priv) static void tas2781_apply_calib(struct tasdevice_priv *tas_priv) { - static const unsigned char page_array[CALIB_MAX] = { - 0x17, 0x18, 0x18, 0x13, 0x18, + struct calidata *cali_data = &tas_priv->cali_data; + struct cali_reg *r = &cali_data->cali_reg_array; + unsigned int cali_reg[CALIB_MAX] = { + TASDEVICE_REG(0, 0x17, 0x74), + TASDEVICE_REG(0, 0x18, 0x0c), + TASDEVICE_REG(0, 0x18, 0x14), + TASDEVICE_REG(0, 0x13, 0x70), + TASDEVICE_REG(0, 0x18, 0x7c), }; - static const unsigned char rgno_array[CALIB_MAX] = { - 0x74, 0x0c, 0x14, 0x70, 0x7c, - }; - int offset = 0; int i, j, rc; + int oft = 0; __be32 data; + if (tas_priv->dspbin_typ != TASDEV_BASIC) { + cali_reg[0] = r->r0_reg; + cali_reg[1] = r->invr0_reg; + cali_reg[2] = r->r0_low_reg; + cali_reg[3] = r->pow_reg; + cali_reg[4] = r->tlimit_reg; + } + for (i = 0; i < tas_priv->ndev; i++) { for (j = 0; j < CALIB_MAX; j++) { data = cpu_to_be32( - *(uint32_t *)&tas_priv->cali_data.data[offset]); + *(uint32_t *)&tas_priv->cali_data.data[oft]); rc = tasdevice_dev_bulk_write(tas_priv, i, - TASDEVICE_REG(0, page_array[j], rgno_array[j]), - (unsigned char *)&data, 4); + cali_reg[j], (unsigned char *)&data, 4); if (rc < 0) dev_err(tas_priv->dev, "chn %d calib %d bulk_wr err = %d\n", i, j, rc); - offset += 4; + oft += 4; } } } -- 2.34.1

2 1