January 2025 - Alsa-devel - mailman.alsa-project.org

Topology: NHLT: Intel: Fix DMA slots config in SSP blob
by GitHub pull_request - opened 16 Jan '25

16 Jan '25

alsa-project/alsa-utils pull request #289 was opened from singalsu: This fixes a mistake in function ssp_calculate_intern_v30(). The rx_dir[0] and tx_dir[0] value was hard-coded to 0x3 for typical stereo slots configuration. It should be instead retrieved from topology parameters for the SSP. Request URL : https://github.com/alsa-project/alsa-utils/pull/289 Patch URL : https://github.com/alsa-project/alsa-utils/pull/289.patch Repository URL: https://github.com/alsa-project/alsa-utils

1 0

no internal sound with snd_hda_intel, ALC256/ Lenovo ThinkCentre M90a Pro Gen4
by Ronny Sattler 15 Jan '25

15 Jan '25

Hello, I have a problem with the snd-hda-intel. There is no sound. Only when I plug in headphones do I hear the sound on the headphones. The speakers are onboard (All in One - PC) and always remain mute. I suspect it is because the amplifier is not activated or a PIN assignment is incorrect. Please let me know if there is anything else I can do for you on the PC. Attached are previous log files and general information. Thank you very much for your work :-) Best regards Ronny

1 0

[RFC PATCH] soc: audio-graph-card2: use correct endpoint when getting link parameters
by Ivaylo Dimitrov 15 Jan '25

15 Jan '25

We may have multiple links between ports, with each link having different parameters. Currently, no matter the topology, it is always port endpoint 0 that is used when setting parameters. On a complex sound system, like the one found on Motorola droid4, hifi and voice DAIs require differents formats (i2s vs dsp_a) and curently it is impossible to use DT to set that. Implementing the change leads to partially dropping of at least 0dedbde5062d (ASoC: cpcap: Implement set_tdm_slot for voice call support), as core does most of what is needed to configure voice DAI. We (on Maemo Leste ) use the patch (along with few others) to have voice calls working properly on d4 through UCM. The patch is for linux 6.6, I want to know whether the approach would be accepted before sending a proper patch for current master. the original commit message follows: When link parameters are parsed, it is always endpoint@0 that is used and parameters set to other endpoints are ignored. Fix that by using endpoint that is set in DT when parsing link parameters. Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75(a)gmail.com> --- sound/soc/generic/audio-graph-card2.c | 59 +++++++++++++-------------- 1 file changed, 28 insertions(+), 31 deletions(-) diff --git a/sound/soc/generic/audio-graph-card2.c b/sound/soc/generic/audio-graph-card2.c index b1c675c6b6db..163a20c8ffee 100644 --- a/sound/soc/generic/audio-graph-card2.c +++ b/sound/soc/generic/audio-graph-card2.c @@ -508,17 +508,16 @@ static int __graph_parse_node(struct asoc_simple_priv *priv, static int graph_parse_node(struct asoc_simple_priv *priv, enum graph_type gtype, - struct device_node *port, + struct device_node *ep, struct link_info *li, int is_cpu) { - struct device_node *ep; int ret = 0; + struct device_node *port = of_get_parent(ep); + bool is_multi = graph_lnk_is_multi(port); - if (graph_lnk_is_multi(port)) { + if (is_multi) { int idx; - of_node_get(port); - for (idx = 0;; idx++) { ep = graph_get_next_multi_ep(&port); if (!ep) @@ -532,9 +531,8 @@ static int graph_parse_node(struct asoc_simple_priv *priv, } } else { /* Single CPU / Codec */ - ep = port_to_endpoint(port); + of_node_put(port); ret = __graph_parse_node(priv, gtype, ep, li, is_cpu, 0); - of_node_put(ep); } return ret; @@ -591,22 +589,20 @@ static void graph_parse_daifmt(struct device_node *node, } static void graph_link_init(struct asoc_simple_priv *priv, - struct device_node *port, + struct device_node *ep, struct link_info *li, int is_cpu_node) { struct snd_soc_dai_link *dai_link = simple_priv_to_link(priv, li->link); - struct device_node *ep; + struct device_node *port = of_get_parent(ep); + bool is_multi = graph_lnk_is_multi(port); struct device_node *ports; unsigned int daifmt = 0, daiclk = 0; unsigned int bit_frame = 0; - if (graph_lnk_is_multi(port)) { - of_node_get(port); + if (is_multi) { ep = graph_get_next_multi_ep(&port); port = of_get_parent(ep); - } else { - ep = port_to_endpoint(port); } ports = of_get_parent(port); @@ -642,6 +638,9 @@ static void graph_link_init(struct asoc_simple_priv *priv, dai_link->ops = &graph_ops; if (priv->ops) dai_link->ops = priv->ops; + + of_node_put(port); + of_node_put(ports); } int audio_graph2_link_normal(struct asoc_simple_priv *priv, @@ -650,7 +649,7 @@ int audio_graph2_link_normal(struct asoc_simple_priv *priv, { struct device_node *cpu_port = lnk; struct device_node *cpu_ep = port_to_endpoint(cpu_port); - struct device_node *codec_port = of_graph_get_remote_port(cpu_ep); + struct device_node *codec_ep = of_graph_get_remote_endpoint(cpu_ep); int ret; /* @@ -658,20 +657,20 @@ int audio_graph2_link_normal(struct asoc_simple_priv *priv, * see * __graph_parse_node() :: DAI Naming */ - ret = graph_parse_node(priv, GRAPH_NORMAL, codec_port, li, 0); + ret = graph_parse_node(priv, GRAPH_NORMAL, codec_ep, li, 0); if (ret < 0) goto err; /* * call CPU, and set DAI Name */ - ret = graph_parse_node(priv, GRAPH_NORMAL, cpu_port, li, 1); + ret = graph_parse_node(priv, GRAPH_NORMAL, cpu_ep, li, 1); if (ret < 0) goto err; - graph_link_init(priv, cpu_port, li, 1); + graph_link_init(priv, cpu_ep, li, 1); err: - of_node_put(codec_port); + of_node_put(codec_ep); of_node_put(cpu_ep); return ret; @@ -684,7 +683,6 @@ int audio_graph2_link_dpcm(struct asoc_simple_priv *priv, { struct device_node *ep = port_to_endpoint(lnk); struct device_node *rep = of_graph_get_remote_endpoint(ep); - struct device_node *rport = of_graph_get_remote_port(ep); struct snd_soc_dai_link *dai_link = simple_priv_to_link(priv, li->link); struct simple_dai_props *dai_props = simple_priv_to_props(priv, li->link); int is_cpu = asoc_graph_is_ports0(lnk); @@ -718,7 +716,7 @@ int audio_graph2_link_dpcm(struct asoc_simple_priv *priv, dai_link->dynamic = 1; dai_link->dpcm_merged_format = 1; - ret = graph_parse_node(priv, GRAPH_DPCM, rport, li, 1); + ret = graph_parse_node(priv, GRAPH_DPCM, rep, li, 1); if (ret) goto err; } else { @@ -751,7 +749,7 @@ int audio_graph2_link_dpcm(struct asoc_simple_priv *priv, dai_link->no_pcm = 1; dai_link->be_hw_params_fixup = asoc_simple_be_hw_params_fixup; - ret = graph_parse_node(priv, GRAPH_DPCM, rport, li, 0); + ret = graph_parse_node(priv, GRAPH_DPCM, rep, li, 0); if (ret < 0) goto err; } @@ -761,11 +759,10 @@ int audio_graph2_link_dpcm(struct asoc_simple_priv *priv, snd_soc_dai_link_set_capabilities(dai_link); - graph_link_init(priv, rport, li, is_cpu); + graph_link_init(priv, rep, li, is_cpu); err: of_node_put(ep); of_node_put(rep); - of_node_put(rport); return ret; } @@ -777,7 +774,7 @@ int audio_graph2_link_c2c(struct asoc_simple_priv *priv, { struct snd_soc_dai_link *dai_link = simple_priv_to_link(priv, li->link); struct device_node *port0, *port1, *ports; - struct device_node *codec0_port, *codec1_port; + struct device_node *codec0_ep, *codec1_ep; struct device_node *ep0, *ep1; u32 val = 0; int ret = -EINVAL; @@ -834,31 +831,31 @@ int audio_graph2_link_c2c(struct asoc_simple_priv *priv, ep0 = port_to_endpoint(port0); ep1 = port_to_endpoint(port1); - codec0_port = of_graph_get_remote_port(ep0); - codec1_port = of_graph_get_remote_port(ep1); + codec0_ep = of_graph_get_remote_endpoint(ep0); + codec1_ep = of_graph_get_remote_endpoint(ep1); /* * call Codec first. * see * __graph_parse_node() :: DAI Naming */ - ret = graph_parse_node(priv, GRAPH_C2C, codec1_port, li, 0); + ret = graph_parse_node(priv, GRAPH_C2C, codec1_ep, li, 0); if (ret < 0) goto err2; /* * call CPU, and set DAI Name */ - ret = graph_parse_node(priv, GRAPH_C2C, codec0_port, li, 1); + ret = graph_parse_node(priv, GRAPH_C2C, codec0_ep, li, 1); if (ret < 0) goto err2; - graph_link_init(priv, codec0_port, li, 1); + graph_link_init(priv, codec0_ep, li, 1); err2: of_node_put(ep0); of_node_put(ep1); - of_node_put(codec0_port); - of_node_put(codec1_port); + of_node_put(codec0_ep); + of_node_put(codec1_ep); err1: of_node_put(ports); of_node_put(port0); -- 2.30.2

3 9

[PATCH v2 0/5] Updates for rawmidi / sequencer
by Takashi Iwai 14 Jan '25

14 Jan '25

The kernel 6.14 will receive a few small enhancements for rawmidi and sequencer APIs, and this patch set covers those. v1->v2: sync with the latest rawmidi API change to pass 0 to tied_device as default v1: https://lore.kernel.org/20250114085515.11880-1-tiwai@suse.de Takashi === Takashi Iwai (5): Sync UAPI asound.h with 6.14 kernel Sync UAPI asequencer.h with 6.14 kernel rawmidi: Extensions for tied device and substream inactive flag rawmidi: Make rawmidi flag bits doxygen-style comments seq: Define new events for UMP EP/FB change notifications include/local.h | 1 + include/rawmidi.h | 4 +++- include/seq_event.h | 12 ++++++++++++ include/sound/uapi/asequencer.h | 12 +++++++++++- include/sound/uapi/asound.h | 8 ++++++-- src/rawmidi/rawmidi.c | 16 ++++++++++++++++ 6 files changed, 49 insertions(+), 4 deletions(-) -- 2.43.0

1 5

[PATCH alsa-lib 0/5] Updates for rawmidi / sequencer
by Takashi Iwai 14 Jan '25

14 Jan '25

The kernel 6.14 will receive a few small enhancements for rawmidi and sequencer APIs, and this patch set covers those. Takashi === Takashi Iwai (5): Sync UAPI asound.h with 6.14 kernel Sync UAPI asequencer.h with 6.14 kernel rawmidi: Extensions for tied device and substream inactive flag rawmidi: Make rawmidi flag bits doxygen-style comments seq: Define new events for UMP EP/FB change notifications include/local.h | 1 + include/rawmidi.h | 4 +++- include/seq_event.h | 12 ++++++++++++ include/sound/uapi/asequencer.h | 12 +++++++++++- include/sound/uapi/asound.h | 8 ++++++-- src/rawmidi/rawmidi.c | 22 +++++++++++++++++++++- 6 files changed, 54 insertions(+), 5 deletions(-) -- 2.43.0

1 5

rt722: change output volume of headphone to 0dB
by GitHub pull_request - opened 14 Jan '25

14 Jan '25

alsa-project/alsa-ucm-conf pull request #496 was opened from shumingfan: rt722: change output volume of headphone to 0dB Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/496 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/496.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH v2 1/1] ASoC: codecs: nau8824: fix max volume for Speaker output
by Maxim Kochetkov 13 Jan '25

13 Jan '25

There is no audio output if Speaker volume is set above 25. According to datasheet Rev 2.5 maximum allowed value for the Speaker output is 0b11001 (25) 0x6D CLASSD_GAIN_1/ 0x6E CLASSD_GAIN_2: Left/Right Channel Class-D Driver Gain For DAC Left/Right Input (Step size is 1dB.) 00000 = Mute (DEFAULT) 00001 = 0dB 00002 = 1dB ... 11000 = 23dB 11001 = 24dB So adjust this value in accordance with the datasheet. Signed-off-by: Maxim Kochetkov <fido_max(a)inbox.ru> --- sound/soc/codecs/nau8824.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/nau8824.c b/sound/soc/codecs/nau8824.c index 12540397fd4d..5aaf8c496300 100644 --- a/sound/soc/codecs/nau8824.c +++ b/sound/soc/codecs/nau8824.c @@ -368,13 +368,13 @@ static const struct snd_kcontrol_new nau8824_snd_controls[] = { SOC_ENUM("DAC Oversampling Rate", nau8824_dac_oversampl_enum), SOC_SINGLE_TLV("Speaker Right DACR Volume", - NAU8824_REG_CLASSD_GAIN_1, 8, 0x1f, 0, spk_vol_tlv), + NAU8824_REG_CLASSD_GAIN_1, 8, 0x19, 0, spk_vol_tlv), SOC_SINGLE_TLV("Speaker Left DACL Volume", - NAU8824_REG_CLASSD_GAIN_2, 0, 0x1f, 0, spk_vol_tlv), + NAU8824_REG_CLASSD_GAIN_2, 0, 0x19, 0, spk_vol_tlv), SOC_SINGLE_TLV("Speaker Left DACR Volume", - NAU8824_REG_CLASSD_GAIN_1, 0, 0x1f, 0, spk_vol_tlv), + NAU8824_REG_CLASSD_GAIN_1, 0, 0x19, 0, spk_vol_tlv), SOC_SINGLE_TLV("Speaker Right DACL Volume", - NAU8824_REG_CLASSD_GAIN_2, 8, 0x1f, 0, spk_vol_tlv), + NAU8824_REG_CLASSD_GAIN_2, 8, 0x19, 0, spk_vol_tlv), SOC_SINGLE_TLV("Headphone Right DACR Volume", NAU8824_REG_ATT_PORT0, 8, 0x1f, 0, hp_vol_tlv), -- 2.45.2

2 1

speaker-test.1: Some remarks and a patch with editorial changes for this man page
by Bjarni Ingi Gislason 11 Jan '25

11 Jan '25

Package: alsa-utils Version: 1.2.13-1 Severity: minor Tags: patch * What led up to the situation? Checking for defects with a new version test-[g|n]roff -mandoc -t -K utf8 -rF0 -rHY=0 -rCHECKSTYLE=10 -ww -z < "man page" [Use "groff -e ' $' <file>" to find trailing spaces.] ["test-groff" is a script in the repository for "groff"; is not shipped] (local copy and "troff" slightly changed by me). [The fate of "test-nroff" was decided in groff bug #55941.] * What was the outcome of this action? an.tmac:<stdin>:183: misuse, warning: .BR is for at least 2 arguments, got 1 Use macro '.B' for one argument or split argument. * What outcome did you expect instead? No output (no warnings). -.- General remarks and further material, if a diff-file exist, are in the attachments. -- System Information: Debian Release: trixie/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 6.12.6-amd64 (SMP w/2 CPU threads; PREEMPT) Locale: LANG=is_IS.iso88591, LC_CTYPE=is_IS.iso88591 (charmap=ISO-8859-1), LANGUAGE not set Shell: /bin/sh linked to /usr/bin/dash Init: sysvinit (via /sbin/init) Versions of packages alsa-utils depends on: ii kmod 33+20240816-2 ii libasound2t64 1.2.13-1+b1 ii libatopology2t64 1.2.13-1+b1 ii libc6 2.40-4 ii libfftw3-single3 3.3.10-2+b1 ii libncursesw6 6.5-2+b1 ii libsamplerate0 0.2.2-4+b2 ii libtinfo6 6.5-2+b1 alsa-utils recommends no packages. Versions of packages alsa-utils suggests: pn dialog <none> -- no debconf information

1 0

[GIT PULL] ASoC fixes for v6.13-rc6
by Mark Brown 10 Jan '25

10 Jan '25

The following changes since commit 32c9c06adb5b157ef259233775a063a43746d699: ASoC: mediatek: disable buffer pre-allocation (2024-12-19 11:15:09 +0000) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git tags/asoc-fix-v6.13-rc6 for you to fetch changes up to 139fa599cea0fd9d38e00246ea9f79af6c59acbd: ASoC: rsnd: check rsnd_adg_clk_enable() return value (2025-01-09 13:17:02 +0000) ---------------------------------------------------------------- ASoC: Fixes for v6.13 A collection of device specific fixes that came in over the holidays, plus a MAINTAINERS update and some documentation to help users debug problems with some of the Cirrus CODECs found in modern laptops. ---------------------------------------------------------------- Charles Keepax (3): ASoC: wm8994: Add depends on MFD core ASoC: samsung: Add missing selects for MFD_WM8994 ASoC: samsung: Add missing depends on I2C Kuninori Morimoto (2): MAINTAINERS: add missing maintainers for Simple Audio Card ASoC: rsnd: check rsnd_adg_clk_enable() return value Maciej Strozek (1): ASoC: cs42l43: Add codec force suspend/resume ops Marian Postevca (1): ASoC: codecs: es8316: Fix HW rate calculation for 48Mhz MCLK Richard Fitzgerald (2): ALSA: doc: cs35l56: Add information about Cirrus Logic CS35L54/56/57 ALSA: doc: Add codecs/index.rst to top-level index Shenghao Ding (1): ASoC: tas2781: Fix occasional calibration failture Zhang Yi (1): ASoC: codecs: ES8326: Adjust ANA_MICBIAS to reduce pop noise Documentation/sound/codecs/cs35l56.rst | 292 +++++++++++++++++++++++++++++++++ Documentation/sound/codecs/index.rst | 9 + Documentation/sound/index.rst | 1 + MAINTAINERS | 2 + sound/soc/codecs/Kconfig | 1 + sound/soc/codecs/cs42l43.c | 1 + sound/soc/codecs/es8316.c | 10 +- sound/soc/codecs/es8326.c | 23 ++- sound/soc/codecs/tas2781-i2c.c | 2 +- sound/soc/renesas/rcar/adg.c | 28 +++- sound/soc/renesas/rcar/core.c | 4 +- sound/soc/renesas/rcar/rsnd.h | 2 +- sound/soc/samsung/Kconfig | 6 +- 13 files changed, 364 insertions(+), 17 deletions(-) create mode 100644 Documentation/sound/codecs/cs35l56.rst create mode 100644 Documentation/sound/codecs/index.rst

2 1

alsactl info fails with exit code 25
by GitHub issues - opened 09 Jan '25

09 Jan '25

alsa-project/alsa-utils issue #287 was opened from z-s-e: Here is the output of running alsactl info on my machine: ``` $ alsactl info 0 # # Sound card # - card: 0 id: Generic name: HD-Audio Generic longname: HD-Audio Generic at 0xb88c8000 irq 87 driver_name: HDA-Intel mixer_name: ATI R6xx HDMI components: HDA:1002aa01,00aa0100,00100800 controls_count: 15 pcm: - stream: PLAYBACK devices: - device: 3 id: HDMI 0 name: G246HYL subdevices: - subdevice: 0 name: subdevice #0 - device: 7 id: HDMI 1 name: HDMI 1 subdevices: - subdevice: 0 name: subdevice #0 alsactl: rawmidi_device_list:105: snd_ctl_rawmidi_next_device $ echo $? 25 ``` Apparently it fails when trying to enumerate raw midi devices. I don't think this is supposed to happen, right? alsa-info for reference: [alsa-info.txt](https://github.com/user-attachments/files/18362369/alsa-info… Issue URL : https://github.com/alsa-project/alsa-utils/issues/287 Repository URL: https://github.com/alsa-project/alsa-utils

1 0