August 2024 - Alsa-devel - mailman.alsa-project.org

[PATCH 1/8] ASoC: SOF: amd: Fix for incorrect acp error satus register offset
by Vijendar Mukunda 13 Aug '24

13 Aug '24

Adding 'dsp_intr_base' to ACP error status register offset in irq handler points to wrong register offset. ACP error status register offset got changed from ACP 6.0 onwards. Add 'acp_error_stat' descriptor field and update the value based on the ACP variant. Fixes: 0e44572a28a4 ("ASoC: SOF: amd: Add helper callbacks for ACP's DMA configuration") Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda(a)amd.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> --- sound/soc/sof/amd/acp-dsp-offset.h | 3 ++- sound/soc/sof/amd/acp.c | 5 +++-- sound/soc/sof/amd/acp.h | 1 + sound/soc/sof/amd/pci-acp63.c | 1 + sound/soc/sof/amd/pci-rmb.c | 1 + sound/soc/sof/amd/pci-rn.c | 1 + 6 files changed, 9 insertions(+), 3 deletions(-) diff --git a/sound/soc/sof/amd/acp-dsp-offset.h b/sound/soc/sof/amd/acp-dsp-offset.h index 59afbe2e0f42..66968efda869 100644 --- a/sound/soc/sof/amd/acp-dsp-offset.h +++ b/sound/soc/sof/amd/acp-dsp-offset.h @@ -76,7 +76,8 @@ #define DSP_SW_INTR_CNTL_OFFSET 0x0 #define DSP_SW_INTR_STAT_OFFSET 0x4 #define DSP_SW_INTR_TRIG_OFFSET 0x8 -#define ACP_ERROR_STATUS 0x18C4 +#define ACP3X_ERROR_STATUS 0x18C4 +#define ACP6X_ERROR_STATUS 0x1A4C #define ACP3X_AXI2DAGB_SEM_0 0x1880 #define ACP5X_AXI2DAGB_SEM_0 0x1884 #define ACP6X_AXI2DAGB_SEM_0 0x1874 diff --git a/sound/soc/sof/amd/acp.c b/sound/soc/sof/amd/acp.c index 7b122656efd1..d0b7d1c54248 100644 --- a/sound/soc/sof/amd/acp.c +++ b/sound/soc/sof/amd/acp.c @@ -92,6 +92,7 @@ static int config_dma_channel(struct acp_dev_data *adata, unsigned int ch, unsigned int idx, unsigned int dscr_count) { struct snd_sof_dev *sdev = adata->dev; + const struct sof_amd_acp_desc *desc = get_chip_info(sdev->pdata); unsigned int val, status; int ret; @@ -102,7 +103,7 @@ static int config_dma_channel(struct acp_dev_data *adata, unsigned int ch, val & (1 << ch), ACP_REG_POLL_INTERVAL, ACP_REG_POLL_TIMEOUT_US); if (ret < 0) { - status = snd_sof_dsp_read(sdev, ACP_DSP_BAR, ACP_ERROR_STATUS); + status = snd_sof_dsp_read(sdev, ACP_DSP_BAR, desc->acp_error_stat); val = snd_sof_dsp_read(sdev, ACP_DSP_BAR, ACP_DMA_ERR_STS_0 + ch * sizeof(u32)); dev_err(sdev->dev, "ACP_DMA_ERR_STS :0x%x ACP_ERROR_STATUS :0x%x\n", val, status); @@ -404,7 +405,7 @@ static irqreturn_t acp_irq_handler(int irq, void *dev_id) snd_sof_dsp_write(sdev, ACP_DSP_BAR, desc->ext_intr_stat, ACP_ERROR_IRQ_MASK); snd_sof_dsp_write(sdev, ACP_DSP_BAR, base + ACP_SW0_I2S_ERROR_REASON, 0); snd_sof_dsp_write(sdev, ACP_DSP_BAR, base + ACP_SW1_I2S_ERROR_REASON, 0); - snd_sof_dsp_write(sdev, ACP_DSP_BAR, base + ACP_ERROR_STATUS, 0); + snd_sof_dsp_write(sdev, ACP_DSP_BAR, desc->acp_error_stat, 0); irq_flag = 1; } diff --git a/sound/soc/sof/amd/acp.h b/sound/soc/sof/amd/acp.h index ec9170b3f068..6ac853ff6093 100644 --- a/sound/soc/sof/amd/acp.h +++ b/sound/soc/sof/amd/acp.h @@ -203,6 +203,7 @@ struct sof_amd_acp_desc { u32 probe_reg_offset; u32 reg_start_addr; u32 reg_end_addr; + u32 acp_error_stat; u32 sdw_max_link_count; u64 sdw_acpi_dev_addr; }; diff --git a/sound/soc/sof/amd/pci-acp63.c b/sound/soc/sof/amd/pci-acp63.c index 54d42f83ce9e..c3da70549995 100644 --- a/sound/soc/sof/amd/pci-acp63.c +++ b/sound/soc/sof/amd/pci-acp63.c @@ -35,6 +35,7 @@ static const struct sof_amd_acp_desc acp63_chip_info = { .ext_intr_cntl = ACP6X_EXTERNAL_INTR_CNTL, .ext_intr_stat = ACP6X_EXT_INTR_STAT, .ext_intr_stat1 = ACP6X_EXT_INTR_STAT1, + .acp_error_stat = ACP6X_ERROR_STATUS, .dsp_intr_base = ACP6X_DSP_SW_INTR_BASE, .sram_pte_offset = ACP6X_SRAM_PTE_OFFSET, .hw_semaphore_offset = ACP6X_AXI2DAGB_SEM_0, diff --git a/sound/soc/sof/amd/pci-rmb.c b/sound/soc/sof/amd/pci-rmb.c index 4bc30951f8b0..194b7ff37e9e 100644 --- a/sound/soc/sof/amd/pci-rmb.c +++ b/sound/soc/sof/amd/pci-rmb.c @@ -33,6 +33,7 @@ static const struct sof_amd_acp_desc rembrandt_chip_info = { .pgfsm_base = ACP6X_PGFSM_BASE, .ext_intr_stat = ACP6X_EXT_INTR_STAT, .dsp_intr_base = ACP6X_DSP_SW_INTR_BASE, + .acp_error_stat = ACP6X_ERROR_STATUS, .sram_pte_offset = ACP6X_SRAM_PTE_OFFSET, .hw_semaphore_offset = ACP6X_AXI2DAGB_SEM_0, .fusion_dsp_offset = ACP6X_DSP_FUSION_RUNSTALL, diff --git a/sound/soc/sof/amd/pci-rn.c b/sound/soc/sof/amd/pci-rn.c index e08875bdfa8b..bff2d979ea6a 100644 --- a/sound/soc/sof/amd/pci-rn.c +++ b/sound/soc/sof/amd/pci-rn.c @@ -33,6 +33,7 @@ static const struct sof_amd_acp_desc renoir_chip_info = { .pgfsm_base = ACP3X_PGFSM_BASE, .ext_intr_stat = ACP3X_EXT_INTR_STAT, .dsp_intr_base = ACP3X_DSP_SW_INTR_BASE, + .acp_error_stat = ACP3X_ERROR_STATUS, .sram_pte_offset = ACP3X_SRAM_PTE_OFFSET, .hw_semaphore_offset = ACP3X_AXI2DAGB_SEM_0, .acp_clkmux_sel = ACP3X_CLKMUX_SEL, -- 2.34.1

4 16

[PATCH 0/2] Add a driver for the Iron Device SMA1307 Amp
by Kiseok Jo 13 Aug '24

13 Aug '24

This adds basic audio support for the Iron Device SMA1307 amplifier Kiseok Jo (2): ASoC: sma1307: Add driver for Iron Device SMA1307 ASoC: sma1307: Add bindings for Iron Device SMA1307 amplifier .../bindings/sound/irondevice,sma1307.yaml | 66 + sound/soc/codecs/Kconfig | 8 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/sma1307.c | 2630 +++++++++++++++++ sound/soc/codecs/sma1307.h | 456 +++ 5 files changed, 3162 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/irondevice,sma1307.yaml create mode 100644 sound/soc/codecs/sma1307.c create mode 100644 sound/soc/codecs/sma1307.h -- 2.39.2

4 8

[PATCH RESEND 0/8] AMD SOF stack fixes and improvements
by Vijendar Mukunda 12 Aug '24

12 Aug '24

This patch series consists of few fixes and improvments for AMD SOF stack. Link: https://github.com/thesofproject/linux/pull/5103 Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Vijendar Mukunda (8): ASoC: SOF: amd: Fix for incorrect acp error satus register offset ASoC: SOF: amd: fix for acp error reason registers wrong offset ASoC: SOF: amd: move iram-dram fence register programming sequence ASoC: SOF: amd: fix for acp init sequence ASoC: SOF: amd: update conditional check for cache register update ASoC: SOF: amd: modify psp send command conditional checks ASoC: SOF: amd: remove unused variable from sof_amd_acp_desc structure ASoC: amd: acp: Convert comma to semicolon sound/soc/amd/acp/acp-sdw-sof-mach.c | 6 +-- sound/soc/sof/amd/acp-dsp-offset.h | 6 ++- sound/soc/sof/amd/acp-loader.c | 2 +- sound/soc/sof/amd/acp.c | 59 ++++++++++++++++++---------- sound/soc/sof/amd/acp.h | 10 +++-- sound/soc/sof/amd/pci-acp63.c | 3 +- sound/soc/sof/amd/pci-rmb.c | 3 +- sound/soc/sof/amd/pci-rn.c | 3 +- sound/soc/sof/amd/pci-vangogh.c | 1 - 9 files changed, 60 insertions(+), 33 deletions(-) -- 2.34.1

2 9

[PATCH v1] ASoc: tas2781: Add new Kontrol to set tas2563 digital gain
by Shenghao Ding 11 Aug '24

11 Aug '24

Requriment from customer to add new kcontrol to set tas2563 digital gain and set "Speaker Force Firmware Load" as the common kcontrol for both tas27871 and tas2563. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v1: - Changed the copyright year to 2024 in tas2781-tlv.h. - Changed the copyright year to 2024 in tas2781.h. - Set "Speaker Force Firmware Load" as the common kcontrol for for both tas27871 and tas2563, that is tasdevice_snd_controls. - Only tas2781_snd_controls only for gain setting. - Add tas2563_dvc_tlv kcontrol for tas2563 digital gain setting. - In codec probe, for tas2563, loading tas2563 gain control; for tas2781, loading tas2781 gain control. --- include/sound/tas2781-tlv.h | 262 ++++++++++++++++++++++++++++++++- include/sound/tas2781.h | 3 +- sound/soc/codecs/tas2781-i2c.c | 135 ++++++++++++++++- 3 files changed, 392 insertions(+), 8 deletions(-) diff --git a/include/sound/tas2781-tlv.h b/include/sound/tas2781-tlv.h index 1dc59005d241..99c41bfc7827 100644 --- a/include/sound/tas2781-tlv.h +++ b/include/sound/tas2781-tlv.h @@ -2,7 +2,7 @@ // // ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier // -// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// Copyright (C) 2022 - 2024 Texas Instruments Incorporated // https://www.ti.com // // The TAS2781 driver implements a flexible and configurable @@ -17,5 +17,265 @@ static const __maybe_unused DECLARE_TLV_DB_SCALE(dvc_tlv, -10000, 100, 0); static const DECLARE_TLV_DB_SCALE(amp_vol_tlv, 1100, 50, 0); +static const DECLARE_TLV_DB_SCALE(tas2563_dvc_tlv, -12150, 50, 1); +/* pow(10, db/20) * pow(2,30) */ +static const unsigned char tas2563_dvc_table[][4] = { + { 0X00, 0X00, 0X00, 0X00 }, /* -121.5db */ + { 0X00, 0X00, 0X03, 0XBC }, /* -121.0db */ + { 0X00, 0X00, 0X03, 0XF5 }, /* -120.5db */ + { 0X00, 0X00, 0X04, 0X31 }, /* -120.0db */ + { 0X00, 0X00, 0X04, 0X71 }, /* -119.5db */ + { 0X00, 0X00, 0X04, 0XB4 }, /* -119.0db */ + { 0X00, 0X00, 0X04, 0XFC }, /* -118.5db */ + { 0X00, 0X00, 0X05, 0X47 }, /* -118.0db */ + { 0X00, 0X00, 0X05, 0X97 }, /* -117.5db */ + { 0X00, 0X00, 0X05, 0XEC }, /* -117.0db */ + { 0X00, 0X00, 0X06, 0X46 }, /* -116.5db */ + { 0X00, 0X00, 0X06, 0XA5 }, /* -116.0db */ + { 0X00, 0X00, 0X07, 0X0A }, /* -115.5db */ + { 0X00, 0X00, 0X07, 0X75 }, /* -115.0db */ + { 0X00, 0X00, 0X07, 0XE6 }, /* -114.5db */ + { 0X00, 0X00, 0X08, 0X5E }, /* -114.0db */ + { 0X00, 0X00, 0X08, 0XDD }, /* -113.5db */ + { 0X00, 0X00, 0X09, 0X63 }, /* -113.0db */ + { 0X00, 0X00, 0X09, 0XF2 }, /* -112.5db */ + { 0X00, 0X00, 0X0A, 0X89 }, /* -112.0db */ + { 0X00, 0X00, 0X0B, 0X28 }, /* -111.5db */ + { 0X00, 0X00, 0X0B, 0XD2 }, /* -111.0db */ + { 0X00, 0X00, 0X0C, 0X85 }, /* -110.5db */ + { 0X00, 0X00, 0X0D, 0X43 }, /* -110.0db */ + { 0X00, 0X00, 0X0E, 0X0C }, /* -109.5db */ + { 0X00, 0X00, 0X0E, 0XE1 }, /* -109.0db */ + { 0X00, 0X00, 0X0F, 0XC3 }, /* -108.5db */ + { 0X00, 0X00, 0X10, 0XB2 }, /* -108.0db */ + { 0X00, 0X00, 0X11, 0XAF }, /* -107.5db */ + { 0X00, 0X00, 0X12, 0XBC }, /* -107.0db */ + { 0X00, 0X00, 0X13, 0XD8 }, /* -106.5db */ + { 0X00, 0X00, 0X15, 0X05 }, /* -106.0db */ + { 0X00, 0X00, 0X16, 0X44 }, /* -105.5db */ + { 0X00, 0X00, 0X17, 0X96 }, /* -105.0db */ + { 0X00, 0X00, 0X18, 0XFB }, /* -104.5db */ + { 0X00, 0X00, 0X1A, 0X76 }, /* -104.0db */ + { 0X00, 0X00, 0X1C, 0X08 }, /* -103.5db */ + { 0X00, 0X00, 0X1D, 0XB1 }, /* -103.0db */ + { 0X00, 0X00, 0X1F, 0X73 }, /* -102.5db */ + { 0X00, 0X00, 0X21, 0X51 }, /* -102.0db */ + { 0X00, 0X00, 0X23, 0X4A }, /* -101.5db */ + { 0X00, 0X00, 0X25, 0X61 }, /* -101.0db */ + { 0X00, 0X00, 0X27, 0X98 }, /* -100.5db */ + { 0X00, 0X00, 0X29, 0XF1 }, /* -100.0db */ + { 0X00, 0X00, 0X2C, 0X6D }, /* -99.5db */ + { 0X00, 0X00, 0X2F, 0X0F }, /* -99.0db */ + { 0X00, 0X00, 0X31, 0XD9 }, /* -98.5db */ + { 0X00, 0X00, 0X34, 0XCD }, /* -98.0db */ + { 0X00, 0X00, 0X37, 0XEE }, /* -97.5db */ + { 0X00, 0X00, 0X3B, 0X3F }, /* -97.0db */ + { 0X00, 0X00, 0X3E, 0XC1 }, /* -96.5db */ + { 0X00, 0X00, 0X42, 0X79 }, /* -96.0db */ + { 0X00, 0X00, 0X46, 0X6A }, /* -95.5db */ + { 0X00, 0X00, 0X4A, 0X96 }, /* -95.0db */ + { 0X00, 0X00, 0X4F, 0X01 }, /* -94.5db */ + { 0X00, 0X00, 0X53, 0XAF }, /* -94.0db */ + { 0X00, 0X00, 0X58, 0XA5 }, /* -93.5db */ + { 0X00, 0X00, 0X5D, 0XE6 }, /* -93.0db */ + { 0X00, 0X00, 0X63, 0X76 }, /* -92.5db */ + { 0X00, 0X00, 0X69, 0X5B }, /* -92.0db */ + { 0X00, 0X00, 0X6F, 0X99 }, /* -91.5db */ + { 0X00, 0X00, 0X76, 0X36 }, /* -91.0db */ + { 0X00, 0X00, 0X7D, 0X37 }, /* -90.5db */ + { 0X00, 0X00, 0X84, 0XA2 }, /* -90.0db */ + { 0X00, 0X00, 0X8C, 0X7E }, /* -89.5db */ + { 0X00, 0X00, 0X94, 0XD1 }, /* -89.0db */ + { 0X00, 0X00, 0X9D, 0XA3 }, /* -88.5db */ + { 0X00, 0X00, 0XA6, 0XFA }, /* -88.0db */ + { 0X00, 0X00, 0XB0, 0XDF }, /* -87.5db */ + { 0X00, 0X00, 0XBB, 0X5A }, /* -87.0db */ + { 0X00, 0X00, 0XC6, 0X74 }, /* -86.5db */ + { 0X00, 0X00, 0XD2, 0X36 }, /* -86.0db */ + { 0X00, 0X00, 0XDE, 0XAB }, /* -85.5db */ + { 0X00, 0X00, 0XEB, 0XDC }, /* -85.0db */ + { 0X00, 0X00, 0XF9, 0XD6 }, /* -84.5db */ + { 0X00, 0X01, 0X08, 0XA4 }, /* -84.0db */ + { 0X00, 0X01, 0X18, 0X52 }, /* -83.5db */ + { 0X00, 0X01, 0X28, 0XEF }, /* -83.0db */ + { 0X00, 0X01, 0X3A, 0X87 }, /* -82.5db */ + { 0X00, 0X01, 0X4D, 0X2A }, /* -82.0db */ + { 0X00, 0X01, 0X60, 0XE8 }, /* -81.5db */ + { 0X00, 0X01, 0X75, 0XD1 }, /* -81.0db */ + { 0X00, 0X01, 0X8B, 0XF7 }, /* -80.5db */ + { 0X00, 0X01, 0XA3, 0X6E }, /* -80.0db */ + { 0X00, 0X01, 0XBC, 0X48 }, /* -79.5db */ + { 0X00, 0X01, 0XD6, 0X9B }, /* -79.0db */ + { 0X00, 0X01, 0XF2, 0X7E }, /* -78.5db */ + { 0X00, 0X02, 0X10, 0X08 }, /* -78.0db */ + { 0X00, 0X02, 0X2F, 0X51 }, /* -77.5db */ + { 0X00, 0X02, 0X50, 0X76 }, /* -77.0db */ + { 0X00, 0X02, 0X73, 0X91 }, /* -76.5db */ + { 0X00, 0X02, 0X98, 0XC0 }, /* -76.0db */ + { 0X00, 0X02, 0XC0, 0X24 }, /* -75.5db */ + { 0X00, 0X02, 0XE9, 0XDD }, /* -75.0db */ + { 0X00, 0X03, 0X16, 0X0F }, /* -74.5db */ + { 0X00, 0X03, 0X44, 0XDF }, /* -74.0db */ + { 0X00, 0X03, 0X76, 0X76 }, /* -73.5db */ + { 0X00, 0X03, 0XAA, 0XFC }, /* -73.0db */ + { 0X00, 0X03, 0XE2, 0XA0 }, /* -72.5db */ + { 0X00, 0X04, 0X1D, 0X8F }, /* -72.0db */ + { 0X00, 0X04, 0X5B, 0XFD }, /* -71.5db */ + { 0X00, 0X04, 0X9E, 0X1D }, /* -71.0db */ + { 0X00, 0X04, 0XE4, 0X29 }, /* -70.5db */ + { 0X00, 0X05, 0X2E, 0X5A }, /* -70.0db */ + { 0X00, 0X05, 0X7C, 0XF2 }, /* -69.5db */ + { 0X00, 0X05, 0XD0, 0X31 }, /* -69.0db */ + { 0X00, 0X06, 0X28, 0X60 }, /* -68.5db */ + { 0X00, 0X06, 0X85, 0XC8 }, /* -68.0db */ + { 0X00, 0X06, 0XE8, 0XB9 }, /* -67.5db */ + { 0X00, 0X07, 0X51, 0X86 }, /* -67.0db */ + { 0X00, 0X07, 0XC0, 0X8A }, /* -66.5db */ + { 0X00, 0X08, 0X36, 0X21 }, /* -66.0db */ + { 0X00, 0X08, 0XB2, 0XB0 }, /* -65.5db */ + { 0X00, 0X09, 0X36, 0XA1 }, /* -65.0db */ + { 0X00, 0X09, 0XC2, 0X63 }, /* -64.5db */ + { 0X00, 0X0A, 0X56, 0X6D }, /* -64.0db */ + { 0X00, 0X0A, 0XF3, 0X3C }, /* -63.5db */ + { 0X00, 0X0B, 0X99, 0X56 }, /* -63.0db */ + { 0X00, 0X0C, 0X49, 0X48 }, /* -62.5db */ + { 0X00, 0X0D, 0X03, 0XA7 }, /* -62.0db */ + { 0X00, 0X0D, 0XC9, 0X11 }, /* -61.5db */ + { 0X00, 0X0E, 0X9A, 0X2D }, /* -61.0db */ + { 0X00, 0X0F, 0X77, 0XAD }, /* -60.5db */ + { 0X00, 0X10, 0X62, 0X4D }, /* -60.0db */ + { 0X00, 0X11, 0X5A, 0XD5 }, /* -59.5db */ + { 0X00, 0X12, 0X62, 0X16 }, /* -59.0db */ + { 0X00, 0X13, 0X78, 0XF0 }, /* -58.5db */ + { 0X00, 0X14, 0XA0, 0X50 }, /* -58.0db */ + { 0X00, 0X15, 0XD9, 0X31 }, /* -57.5db */ + { 0X00, 0X17, 0X24, 0X9C }, /* -57.0db */ + { 0X00, 0X18, 0X83, 0XAA }, /* -56.5db */ + { 0X00, 0X19, 0XF7, 0X86 }, /* -56.0db */ + { 0X00, 0X1B, 0X81, 0X6A }, /* -55.5db */ + { 0X00, 0X1D, 0X22, 0XA4 }, /* -55.0db */ + { 0X00, 0X1E, 0XDC, 0X98 }, /* -54.5db */ + { 0X00, 0X20, 0XB0, 0XBC }, /* -54.0db */ + { 0X00, 0X22, 0XA0, 0X9D }, /* -53.5db */ + { 0X00, 0X24, 0XAD, 0XE0 }, /* -53.0db */ + { 0X00, 0X26, 0XDA, 0X43 }, /* -52.5db */ + { 0X00, 0X29, 0X27, 0X9D }, /* -52.0db */ + { 0X00, 0X2B, 0X97, 0XE3 }, /* -51.5db */ + { 0X00, 0X2E, 0X2D, 0X27 }, /* -51.0db */ + { 0X00, 0X30, 0XE9, 0X9A }, /* -50.5db */ + { 0X00, 0X33, 0XCF, 0X8D }, /* -50.0db */ + { 0X00, 0X36, 0XE1, 0X78 }, /* -49.5db */ + { 0X00, 0X3A, 0X21, 0XF3 }, /* -49.0db */ + { 0X00, 0X3D, 0X93, 0XC3 }, /* -48.5db */ + { 0X00, 0X41, 0X39, 0XD3 }, /* -48.0db */ + { 0X00, 0X45, 0X17, 0X3B }, /* -47.5db */ + { 0X00, 0X49, 0X2F, 0X44 }, /* -47.0db */ + { 0X00, 0X4D, 0X85, 0X66 }, /* -46.5db */ + { 0X00, 0X52, 0X1D, 0X50 }, /* -46.0db */ + { 0X00, 0X56, 0XFA, 0XE8 }, /* -45.5db */ + { 0X00, 0X5C, 0X22, 0X4E }, /* -45.0db */ + { 0X00, 0X61, 0X97, 0XE1 }, /* -44.5db */ + { 0X00, 0X67, 0X60, 0X44 }, /* -44.0db */ + { 0X00, 0X6D, 0X80, 0X60 }, /* -43.5db */ + { 0X00, 0X73, 0XFD, 0X65 }, /* -43.0db */ + { 0X00, 0X7A, 0XDC, 0XD7 }, /* -42.5db */ + { 0X00, 0X82, 0X24, 0X8A }, /* -42.0db */ + { 0X00, 0X89, 0XDA, 0XAB }, /* -41.5db */ + { 0X00, 0X92, 0X05, 0XC6 }, /* -41.0db */ + { 0X00, 0X9A, 0XAC, 0XC8 }, /* -40.5db */ + { 0X00, 0XA3, 0XD7, 0X0A }, /* -40.0db */ + { 0X00, 0XAD, 0X8C, 0X52 }, /* -39.5db */ + { 0X00, 0XB7, 0XD4, 0XDD }, /* -39.0db */ + { 0X00, 0XC2, 0XB9, 0X65 }, /* -38.5db */ + { 0X00, 0XCE, 0X43, 0X28 }, /* -38.0db */ + { 0X00, 0XDA, 0X7B, 0XF1 }, /* -37.5db */ + { 0X00, 0XE7, 0X6E, 0X1E }, /* -37.0db */ + { 0X00, 0XF5, 0X24, 0XAC }, /* -36.5db */ + { 0X01, 0X03, 0XAB, 0X3D }, /* -36.0db */ + { 0X01, 0X13, 0X0E, 0X24 }, /* -35.5db */ + { 0X01, 0X23, 0X5A, 0X71 }, /* -35.0db */ + { 0X01, 0X34, 0X9D, 0XF8 }, /* -34.5db */ + { 0X01, 0X46, 0XE7, 0X5D }, /* -34.0db */ + { 0X01, 0X5A, 0X46, 0X27 }, /* -33.5db */ + { 0X01, 0X6E, 0XCA, 0XC5 }, /* -33.0db */ + { 0X01, 0X84, 0X86, 0X9F }, /* -32.5db */ + { 0X01, 0X9B, 0X8C, 0X27 }, /* -32.0db */ + { 0X01, 0XB3, 0XEE, 0XE5 }, /* -31.5db */ + { 0X01, 0XCD, 0XC3, 0X8C }, /* -31.0db */ + { 0X01, 0XE9, 0X20, 0X05 }, /* -30.5db */ + { 0X02, 0X06, 0X1B, 0X89 }, /* -30.0db */ + { 0X02, 0X24, 0XCE, 0XB0 }, /* -29.5db */ + { 0X02, 0X45, 0X53, 0X85 }, /* -29.0db */ + { 0X02, 0X67, 0XC5, 0XA2 }, /* -28.5db */ + { 0X02, 0X8C, 0X42, 0X3F }, /* -28.0db */ + { 0X02, 0XB2, 0XE8, 0X55 }, /* -27.5db */ + { 0X02, 0XDB, 0XD8, 0XAD }, /* -27.0db */ + { 0X03, 0X07, 0X36, 0X05 }, /* -26.5db */ + { 0X03, 0X35, 0X25, 0X29 }, /* -26.0db */ + { 0X03, 0X65, 0XCD, 0X13 }, /* -25.5db */ + { 0X03, 0X99, 0X57, 0X0C }, /* -25.0db */ + { 0X03, 0XCF, 0XEE, 0XCF }, /* -24.5db */ + { 0X04, 0X09, 0XC2, 0XB0 }, /* -24.0db */ + { 0X04, 0X47, 0X03, 0XC1 }, /* -23.5db */ + { 0X04, 0X87, 0XE5, 0XFB }, /* -23.0db */ + { 0X04, 0XCC, 0XA0, 0X6D }, /* -22.5db */ + { 0X05, 0X15, 0X6D, 0X68 }, /* -22.0db */ + { 0X05, 0X62, 0X8A, 0XB3 }, /* -21.5db */ + { 0X05, 0XB4, 0X39, 0XBC }, /* -21.0db */ + { 0X06, 0X0A, 0XBF, 0XD4 }, /* -20.5db */ + { 0X06, 0X66, 0X66, 0X66 }, /* -20.0db */ + { 0X06, 0XC7, 0X7B, 0X36 }, /* -19.5db */ + { 0X07, 0X2E, 0X50, 0XA6 }, /* -19.0db */ + { 0X07, 0X9B, 0X3D, 0XF6 }, /* -18.5db */ + { 0X08, 0X0E, 0X9F, 0X96 }, /* -18.0db */ + { 0X08, 0X88, 0XD7, 0X6D }, /* -17.5db */ + { 0X09, 0X0A, 0X4D, 0X2F }, /* -17.0db */ + { 0X09, 0X93, 0X6E, 0XB8 }, /* -16.5db */ + { 0X0A, 0X24, 0XB0, 0X62 }, /* -16.0db */ + { 0X0A, 0XBE, 0X8D, 0X70 }, /* -15.5db */ + { 0X0B, 0X61, 0X88, 0X71 }, /* -15.0db */ + { 0X0C, 0X0E, 0X2B, 0XB0 }, /* -14.5db */ + { 0X0C, 0XC5, 0X09, 0XAB }, /* -14.0db */ + { 0X0D, 0X86, 0XBD, 0X8D }, /* -13.5db */ + { 0X0E, 0X53, 0XEB, 0XB3 }, /* -13.0db */ + { 0X0F, 0X2D, 0X42, 0X38 }, /* -12.5db */ + { 0X10, 0X13, 0X79, 0X87 }, /* -12.0db */ + { 0X11, 0X07, 0X54, 0XF9 }, /* -11.5db */ + { 0X12, 0X09, 0XA3, 0X7A }, /* -11.0db */ + { 0X13, 0X1B, 0X40, 0X39 }, /* -10.5db */ + { 0X14, 0X3D, 0X13, 0X62 }, /* -10.0db */ + { 0X15, 0X70, 0X12, 0XE1 }, /* -9.5db */ + { 0X16, 0XB5, 0X43, 0X37 }, /* -9.0db */ + { 0X18, 0X0D, 0XB8, 0X54 }, /* -8.5db */ + { 0X19, 0X7A, 0X96, 0X7F }, /* -8.0db */ + { 0X1A, 0XFD, 0X13, 0X54 }, /* -7.5db */ + { 0X1C, 0X96, 0X76, 0XC6 }, /* -7.0db */ + { 0X1E, 0X48, 0X1C, 0X37 }, /* -6.5db */ + { 0X20, 0X13, 0X73, 0X9E }, /* -6.0db */ + { 0X21, 0XFA, 0X02, 0XBF }, /* -5.5db */ + { 0X23, 0XFD, 0X66, 0X78 }, /* -5.0db */ + { 0X26, 0X1F, 0X54, 0X1C }, /* -4.5db */ + { 0X28, 0X61, 0X9A, 0XE9 }, /* -4.0db */ + { 0X2A, 0XC6, 0X25, 0X91 }, /* -3.5db */ + { 0X2D, 0X4E, 0XFB, 0XD5 }, /* -3.0db */ + { 0X2F, 0XFE, 0X44, 0X48 }, /* -2.5db */ + { 0X32, 0XD6, 0X46, 0X17 }, /* -2.0db */ + { 0X35, 0XD9, 0X6B, 0X02 }, /* -1.5db */ + { 0X39, 0X0A, 0X41, 0X5F }, /* -1.0db */ + { 0X3C, 0X6B, 0X7E, 0X4F }, /* -0.5db */ + { 0X40, 0X00, 0X00, 0X00 }, /* 0.0db */ + { 0X43, 0XCA, 0XD0, 0X22 }, /* 0.5db */ + { 0X47, 0XCF, 0X26, 0X7D }, /* 1.0db */ + { 0X4C, 0X10, 0X6B, 0XA5 }, /* 1.5db */ + { 0X50, 0X92, 0X3B, 0XE3 }, /* 2.0db */ + { 0X55, 0X58, 0X6A, 0X46 }, /* 2.5db */ + { 0X5A, 0X67, 0X03, 0XDF }, /* 3.0db */ + { 0X5F, 0XC2, 0X53, 0X32 }, /* 3.5db */ + { 0X65, 0X6E, 0XE3, 0XDB }, /* 4.0db */ + { 0X6B, 0X71, 0X86, 0X68 }, /* 4.5db */ + { 0X71, 0XCF, 0X54, 0X71 }, /* 5.0db */ + { 0X78, 0X8D, 0XB4, 0XE9 }, /* 5.5db */ + { 0XFF, 0XFF, 0XFF, 0XFF }, /* 6.0db */ +}; #endif diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h index cd8ce522b78e..3275575f5bfb 100644 --- a/include/sound/tas2781.h +++ b/include/sound/tas2781.h @@ -2,7 +2,7 @@ // // ALSA SoC Texas Instruments TAS2563/TAS2781 Audio Smart Amplifier // -// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// Copyright (C) 2022 - 2024 Texas Instruments Incorporated // https://www.ti.com // // The TAS2563/TAS2781 driver implements a flexible and configurable @@ -50,6 +50,7 @@ #define TASDEVICE_I2CChecksum TASDEVICE_REG(0x0, 0x0, 0x7E) /* Volume control */ +#define TAS2563_DVC_LVL TASDEVICE_REG(0x00, 0x02, 0x0C) #define TAS2781_DVC_LVL TASDEVICE_REG(0x0, 0x0, 0x1A) #define TAS2781_AMP_LEVEL TASDEVICE_REG(0x0, 0x0, 0x03) #define TAS2781_AMP_LEVEL_MASK GENMASK(5, 1) diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index 4d1a0d836e77..4960ab6577f7 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -30,6 +30,7 @@ #include <sound/tas2781.h> #include <sound/tlv.h> #include <sound/tas2781-tlv.h> +#include <asm/unaligned.h> static const struct i2c_device_id tasdevice_id[] = { { "tas2563", TAS2563 }, @@ -103,7 +104,7 @@ static int tas2781_amp_putvol(struct snd_kcontrol *kcontrol, return tasdevice_amp_putvol(tas_priv, ucontrol, mc); } -static int tas2781_force_fwload_get(struct snd_kcontrol *kcontrol, +static int tasdev_force_fwload_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_component *component = @@ -118,7 +119,7 @@ static int tas2781_force_fwload_get(struct snd_kcontrol *kcontrol, return 0; } -static int tas2781_force_fwload_put(struct snd_kcontrol *kcontrol, +static int tasdev_force_fwload_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_component *component = @@ -127,18 +128,114 @@ static int tas2781_force_fwload_put(struct snd_kcontrol *kcontrol, snd_soc_component_get_drvdata(component); bool change, val = (bool)ucontrol->value.integer.value[0]; + mutex_lock(&tas_priv->codec_lock); if (tas_priv->force_fwload_status == val) change = false; else { change = true; tas_priv->force_fwload_status = val; } + mutex_unlock(&tas_priv->codec_lock); dev_dbg(tas_priv->dev, "%s : Force FWload %s\n", __func__, tas_priv->force_fwload_status ? "ON" : "OFF"); return change; } +static int tas2563_digital_gain_get( + struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + unsigned int l = 0, r = mc->max; + unsigned int target, ar_mid, mid, ar_l, ar_r; + unsigned int reg = mc->reg; + unsigned char data[4]; + int ret; + + mutex_lock(&tas_dev->codec_lock); + /* Read the primary device */ + ret = tasdevice_dev_bulk_read(tas_dev, 0, reg, data, 4); + if (ret) { + dev_err(tas_dev->dev, "%s, get AMP vol error\n", __func__); + goto out; + } + + target = get_unaligned_be32(&data[0]); + + while (r > 1 + l) { + mid = (l + r) / 2; + ar_mid = get_unaligned_be32(tas2563_dvc_table[mid]); + if (target < ar_mid) + r = mid; + else + l = mid; + } + + ar_l = get_unaligned_be32(tas2563_dvc_table[l]); + ar_r = get_unaligned_be32(tas2563_dvc_table[r]); + + /* find out the member same as or closer to the current volume */ + ucontrol->value.integer.value[0] = + abs(target - ar_l) <= abs(target - ar_r) ? l : r; +out: + mutex_unlock(&tas_dev->codec_lock); + return 0; +} + +static int tas2563_digital_gain_put( + struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + unsigned int reg = mc->reg; + unsigned int volrd, volwr; + int vol = ucontrol->value.integer.value[0]; + int max = mc->max, i, ret = 1; + unsigned char data[4]; + + vol = clamp(vol, 0, max); + mutex_lock(&tas_dev->codec_lock); + /* Read the primary device */ + ret = tasdevice_dev_bulk_read(tas_dev, 0, reg, data, 4); + if (ret) { + dev_err(tas_dev->dev, "%s, get AMP vol error\n", __func__); + goto out; + } + + volrd = get_unaligned_be32(&data[0]); + volwr = get_unaligned_be32(tas2563_dvc_table[vol]); + + if (volrd == volwr) { + ret = 0; + goto out; + } + + for (i = 0; i < tas_dev->ndev; i++) { + ret = tasdevice_dev_bulk_write(tas_dev, i, reg, + (unsigned char *)tas2563_dvc_table[vol], 4); + if (ret) + dev_err(tas_dev->dev, + "%s, set digital vol error in device %d\n", + __func__, i); + } + +out: + mutex_unlock(&tas_dev->codec_lock); + return ret; +} + +static const struct snd_kcontrol_new tasdevice_snd_controls[] = { + SOC_SINGLE_BOOL_EXT("Speaker Force Firmware Load", 0, + tasdev_force_fwload_get, tasdev_force_fwload_put), +}; + static const struct snd_kcontrol_new tas2781_snd_controls[] = { SOC_SINGLE_RANGE_EXT_TLV("Speaker Analog Gain", TAS2781_AMP_LEVEL, 1, 0, 20, 0, tas2781_amp_getvol, @@ -146,8 +243,13 @@ static const struct snd_kcontrol_new tas2781_snd_controls[] = { SOC_SINGLE_RANGE_EXT_TLV("Speaker Digital Gain", TAS2781_DVC_LVL, 0, 0, 200, 1, tas2781_digital_getvol, tas2781_digital_putvol, dvc_tlv), - SOC_SINGLE_BOOL_EXT("Speaker Force Firmware Load", 0, - tas2781_force_fwload_get, tas2781_force_fwload_put), +}; + +static const struct snd_kcontrol_new tas2563_snd_controls[] = { + SOC_SINGLE_RANGE_EXT_TLV("Speaker Digital Gain", TAS2563_DVC_LVL, 0, + 0, ARRAY_SIZE(tas2563_dvc_table) - 1, 0, + tas2563_digital_gain_get, tas2563_digital_gain_put, + tas2563_dvc_tlv), }; static int tasdevice_set_profile_id(struct snd_kcontrol *kcontrol, @@ -578,6 +680,27 @@ static struct snd_soc_dai_driver tasdevice_dai_driver[] = { static int tasdevice_codec_probe(struct snd_soc_component *codec) { struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec); + int rc; + + if (tas_priv->chip_id == TAS2781) { + rc = snd_soc_add_component_controls(codec, + tas2781_snd_controls, + ARRAY_SIZE(tas2781_snd_controls)); + if (rc < 0) { + dev_err(tas_priv->dev, "%s: Add control err rc = %d", + __func__, rc); + return rc; + } + } else { + rc = snd_soc_add_component_controls(codec, + tas2563_snd_controls, + ARRAY_SIZE(tas2563_snd_controls)); + if (rc < 0) { + dev_err(tas_priv->dev, "%s: Add control err rc = %d", + __func__, rc); + return rc; + } + } tas_priv->name_prefix = codec->name_prefix; return tascodec_init(tas_priv, codec, THIS_MODULE, tasdevice_fw_ready); @@ -605,8 +728,8 @@ static const struct snd_soc_component_driver soc_codec_driver_tasdevice = { .probe = tasdevice_codec_probe, .remove = tasdevice_codec_remove, - .controls = tas2781_snd_controls, - .num_controls = ARRAY_SIZE(tas2781_snd_controls), + .controls = tasdevice_snd_controls, + .num_controls = ARRAY_SIZE(tasdevice_snd_controls), .dapm_widgets = tasdevice_dapm_widgets, .num_dapm_widgets = ARRAY_SIZE(tasdevice_dapm_widgets), .dapm_routes = tasdevice_audio_map, -- 2.34.1

4 3

[PATCH v2] MAINTAINERS: update entries in TEXAS INSTRUMENTS LOW/MIDDLE-POWER AUDIO AMPLIFIER (ASoC/HDA) DRIVERS and add entries for haptic driver
by Shenghao Ding 11 Aug '24

11 Aug '24

Due to internal re-org, Kevin is no longer mnaintaining audio driver. Due to job change to Shenghao Ding and Baojun Xu, drop entries for the audio converter and add entries for both haptics drivers and middle- power audio amplifier drivers. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v2: - Add the detailed information of the maintained drivers. --- MAINTAINERS | 29 +++++++++++------------------ 1 file changed, 11 insertions(+), 18 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index f328373463b0..d1f7e096b270 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -22569,37 +22569,30 @@ S: Maintained F: Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml F: sound/soc/ti/ -TEXAS INSTRUMENTS AUDIO (ASoC/HDA) DRIVERS +TEXAS INSTRUMENTS LOW/MIDDLE-POWER AUDIO AMPLIFIER (ASoC/HDA) & HAPTICS DRIVERS M: Shenghao Ding <shenghao-ding(a)ti.com> -M: Kevin Lu <kevin-lu(a)ti.com> M: Baojun Xu <baojun.xu(a)ti.com> L: alsa-devel(a)alsa-project.org (moderated for non-subscribers) S: Maintained +F: Documentation/devicetree/bindings/input/ti,drv260x.yaml +F: Documentation/devicetree/bindings/input/ti,drv266x.yaml F: Documentation/devicetree/bindings/sound/tas2552.txt +F: Documentation/devicetree/bindings/sound/tas5720.txt F: Documentation/devicetree/bindings/sound/ti,tas2562.yaml F: Documentation/devicetree/bindings/sound/ti,tas2770.yaml +F: Documentation/devicetree/bindings/sound/ti,tas2781.yaml F: Documentation/devicetree/bindings/sound/ti,tas27xx.yaml -F: Documentation/devicetree/bindings/sound/ti,pcm1681.yaml -F: Documentation/devicetree/bindings/sound/ti,pcm3168a.yaml -F: Documentation/devicetree/bindings/sound/ti,tlv320*.yaml -F: Documentation/devicetree/bindings/sound/ti,tlv320adcx140.yaml -F: Documentation/devicetree/bindings/sound/tlv320aic31xx.txt +F: Documentation/devicetree/bindings/sound/ti,tas5086.txt +F: Documentation/devicetree/bindings/sound/ti,tas57xx.yaml +F: Documentation/devicetree/bindings/sound/ti,tas5805m.yaml F: Documentation/devicetree/bindings/sound/tpa6130a2.txt +F: drivers/input/misc/drv2*.c F: include/sound/tas2*.h -F: include/sound/tlv320*.h +F: include/sound/tas5086.h F: include/sound/tpa6130a2-plat.h F: sound/pci/hda/tas2781_hda_i2c.c -F: sound/soc/codecs/pcm1681.c -F: sound/soc/codecs/pcm1789*.* -F: sound/soc/codecs/pcm179x*.* -F: sound/soc/codecs/pcm186x*.* -F: sound/soc/codecs/pcm3008.* -F: sound/soc/codecs/pcm3060*.* -F: sound/soc/codecs/pcm3168a*.* -F: sound/soc/codecs/pcm5102a.c -F: sound/soc/codecs/pcm512x*.* F: sound/soc/codecs/tas2*.* -F: sound/soc/codecs/tlv320*.* +F: sound/soc/codecs/tas5*.* F: sound/soc/codecs/tpa6130a2.* TEXAS INSTRUMENTS DMA DRIVERS -- 2.34.1

1 0

[PATCH 0/3] Add DisplayPort sound support for Fairphone 5 smartphone
by Luca Weiss 10 Aug '24

10 Aug '24

Add the necessary sound card bits and some dts additions to enable sound over DisplayPort-over-USB-C, e.g. to a connected TV or monitor. The UCM files can be found here: https://gitlab.com/postmarketOS/pmaports/-/tree/master/device/testing/devic… Two extra notes: 1. I don't quite understand whether the sound driver should have SoC-specific compatible or device-specific compatible. Some earlier patches by another author for a QCM6490 board and a QCS6490 board use device-specific compatible - but from what I can tell this is not how it's generally done for other sound drivers? 2. Unfortunately DisplayPort enablement itself for Fairphone 5 is not upstream yet. This is blocked by DSI display bringup upstream which is blocked by DSC 1:1:1 not being supported upstream yet and just working with a hacky patch. Nevertheless, DisplayPort audio was validated working with no additional sound-related changes so once DisplayPort gets enabled, sound should also just work upstream. Signed-off-by: Luca Weiss <luca.weiss(a)fairphone.com> --- Luca Weiss (3): ASoC: dt-bindings: qcom,sm8250: Add generic QCM6490 sound card ASoC: qcom: sc8280xp: Add support for generic QCM6490 arm64: dts: qcom: qcm6490-fairphone-fp5: Add DisplayPort sound support .../devicetree/bindings/sound/qcom,sm8250.yaml | 1 + arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 37 ++++++++++++++++++++++ sound/soc/qcom/sc8280xp.c | 1 + 3 files changed, 39 insertions(+) --- base-commit: 6cdb38a56eaf615abc60fbeec0e4ccbdf93468e3 change-id: 20240809-fp5-dp-sound-b3768f3019bd Best regards, -- Luca Weiss <luca.weiss(a)fairphone.com>

4 9

[PATCH AUTOSEL 5.10 02/11] ASoC: Intel: sof_sdw: Add quirks for some new Dell laptops
by Sasha Levin 10 Aug '24

10 Aug '24

From: Charles Keepax <ckeepax(a)opensource.cirrus.com> [ Upstream commit 91cdecaba791c74df6da0650e797fe1192cf2700 ] Add quirks for some new Dell laptops using Cirrus amplifiers in a bridge configuration. Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Signed-off-by: Charles Keepax <ckeepax(a)opensource.cirrus.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Link: https://msgid.link/r/20240527193552.165567-11-pierre-louis.bossart@linux.in… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/boards/sof_sdw.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c index 25bf73a7e7bfa..ad3694d36d969 100644 --- a/sound/soc/intel/boards/sof_sdw.c +++ b/sound/soc/intel/boards/sof_sdw.c @@ -234,6 +234,22 @@ static const struct dmi_system_id sof_sdw_quirk_table[] = { }, .driver_data = (void *)(RT711_JD2_100K), }, + { + .callback = sof_sdw_quirk_cb, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"), + DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "0CE3") + }, + .driver_data = (void *)(SOF_SIDECAR_AMPS), + }, + { + .callback = sof_sdw_quirk_cb, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"), + DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "0CE4") + }, + .driver_data = (void *)(SOF_SIDECAR_AMPS), + }, {} }; -- 2.43.0

2 2

[PATCH] ALSA: pcm: Add xrun counter for snd_pcm_substream
by Norman Bintang 10 Aug '24

10 Aug '24

This patch adds an xrun counter to snd_pcm_substream as an alternative to using logs from XRUN_DEBUG_BASIC. The counter provides a way to track the number of xrun occurences, accessible through the /proc interface. The counter is enabled when CONFIG_SND_PCM_XRUN_DEBUG is set. Example output: $ cat /proc/asound/card0/pcm9p/sub0/status owner_pid : 1425 trigger_time: 235.248957291 tstamp : 0.000000000 delay : 1912 avail : 480 avail_max : 1920 ----- hw_ptr : 672000 appl_ptr : 673440 xrun_counter: 3 # (new row) Signed-off-by: Norman Bintang <normanbt(a)chromium.org> Reviewed-by: Chih-Yang Hsia <paulhsia(a)chromium.org> Tested-by: Chih-Yang Hsia <paulhsia(a)chromium.org> Reviewed-by: David Riley <davidriley(a)chromium.org> --- include/sound/pcm.h | 3 +++ sound/core/pcm.c | 6 ++++++ sound/core/pcm_lib.c | 3 +++ 3 files changed, 12 insertions(+) diff --git a/include/sound/pcm.h b/include/sound/pcm.h index ac8f3aef9205..384032b6c59c 100644 --- a/include/sound/pcm.h +++ b/include/sound/pcm.h @@ -498,6 +498,9 @@ struct snd_pcm_substream { /* misc flags */ unsigned int hw_opened: 1; unsigned int managed_buffer_alloc:1; +#ifdef CONFIG_SND_PCM_XRUN_DEBUG + unsigned int xrun_counter; /* number of times xrun happens */ +#endif /* CONFIG_SND_PCM_XRUN_DEBUG */ }; #define SUBSTREAM_BUSY(substream) ((substream)->ref_count > 0) diff --git a/sound/core/pcm.c b/sound/core/pcm.c index dc37f3508dc7..290690fc2abc 100644 --- a/sound/core/pcm.c +++ b/sound/core/pcm.c @@ -462,6 +462,9 @@ static void snd_pcm_substream_proc_status_read(struct snd_info_entry *entry, snd_iprintf(buffer, "-----\n"); snd_iprintf(buffer, "hw_ptr : %ld\n", runtime->status->hw_ptr); snd_iprintf(buffer, "appl_ptr : %ld\n", runtime->control->appl_ptr); +#ifdef CONFIG_SND_PCM_XRUN_DEBUG + snd_iprintf(buffer, "xrun_counter: %d\n", substream->xrun_counter); +#endif } #ifdef CONFIG_SND_PCM_XRUN_DEBUG @@ -970,6 +973,9 @@ int snd_pcm_attach_substream(struct snd_pcm *pcm, int stream, substream->pid = get_pid(task_pid(current)); pstr->substream_opened++; *rsubstream = substream; +#ifdef CONFIG_SND_PCM_XRUN_DEBUG + substream->xrun_counter = 0; +#endif /* CONFIG_SND_PCM_XRUN_DEBUG */ return 0; } diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index 6e7905749c4a..6eaa950504cf 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -184,6 +184,9 @@ void __snd_pcm_xrun(struct snd_pcm_substream *substream) pcm_warn(substream->pcm, "XRUN: %s\n", name); dump_stack_on_xrun(substream); } +#ifdef CONFIG_SND_PCM_XRUN_DEBUG + substream->xrun_counter++; +#endif } #ifdef CONFIG_SND_PCM_XRUN_DEBUG -- 2.46.0.76.ge559c4bf1a-goog

2 1

[PATCH 0/3] ALSA: update sample rate definition for eARC
by Jerome Brunet 10 Aug '24

10 Aug '24

This patchset updates some sample rate definition for eARC support. Notably it: * adds the definition for 128kHz * update the ASoC spdif codecs to include all supported rates, up to 768kHz * adds missing IEC958 definition for 128k, 352.4k, 384k and 705.6kHz On that last point, as noted in the related commit description, I'd like to stress that I have found the definitions using a testing equipement. I do not have access to the IEC958 specification. It would be best if someone with access to this specification could review/ack patch #2, before applying it. Jerome Brunet (3): ALSA: pcm: add support for 128kHz sample rate ALSA: IEC958 definition for consumer status channel update ASoC: spdif: extend supported rates to 768kHz include/sound/asoundef.h | 6 +++++- include/sound/pcm.h | 13 +++++++------ sound/core/pcm_native.c | 6 +++--- sound/soc/codecs/spdif_receiver.c | 3 ++- sound/soc/codecs/spdif_transmitter.c | 3 ++- 5 files changed, 19 insertions(+), 12 deletions(-) -- 2.43.0

5 15

(Question) Difference between defaults.pcm.srate and defaults.pcm.rate
by GitHub issues - opened 09 Aug '24

09 Aug '24

alsa-project/alsa-lib issue #406 was opened from ViNi-Arco: What is the difference between `defaults.pcm.srate` and `defaults.pcm.rate`? I know there's `defaults.pcm.!rate`, but I couldn't find any information about defaults.pcm.srate I'm asking because I was given this configuration: ![IMG](https://github.com/user-attachments/assets/84316655-2d44-4f54-a842-86bd60a780e3) Issue URL : https://github.com/alsa-project/alsa-lib/issues/406 Repository URL: https://github.com/alsa-project/alsa-lib

1 0