August 2024 - Alsa-devel - mailman.alsa-project.org

[PATCH alsa-lib] pcm: implement snd_pcm_hw_params_get_sync() and obsolete snd_pcm_info_get_sync()
by Jaroslav Kysela 20 Aug '24

20 Aug '24

Use the new clock source mechanism to get information about similar PCM clock sources for PCM streams. Link: https://lore.kernel.org/linux-sound/20240625172836.589380-1-perex@perex.cz/ Signed-off-by: Jaroslav Kysela <perex(a)perex.cz> --- include/pcm.h | 4 ++++ include/sound/uapi/asound.h | 3 ++- src/pcm/pcm.c | 30 ++++++++++++++++++++++++++---- 3 files changed, 32 insertions(+), 5 deletions(-) diff --git a/include/pcm.h b/include/pcm.h index 102ff812..b5c67889 100644 --- a/include/pcm.h +++ b/include/pcm.h @@ -508,6 +508,9 @@ typedef union _snd_pcm_sync_id { unsigned int id32[4]; } snd_pcm_sync_id_t; +/** synchronization ID size (see snd_pcm_hw_params_get_sync) */ +#define SND_PCM_HW_PARAMS_SYNC_SIZE 16 + /** Infinite wait for snd_pcm_wait() */ #define SND_PCM_WAIT_INFINITE (-1) /** Wait for next i/o in snd_pcm_wait() */ @@ -747,6 +750,7 @@ int snd_pcm_hw_params_get_rate_numden(const snd_pcm_hw_params_t *params, unsigned int *rate_den); int snd_pcm_hw_params_get_sbits(const snd_pcm_hw_params_t *params); int snd_pcm_hw_params_get_fifo_size(const snd_pcm_hw_params_t *params); +const unsigned char * snd_pcm_hw_params_get_sync(const snd_pcm_hw_params_t *params); #if 0 typedef struct _snd_pcm_hw_strategy snd_pcm_hw_strategy_t; diff --git a/include/sound/uapi/asound.h b/include/sound/uapi/asound.h index f3b2b94d..012fd890 100644 --- a/include/sound/uapi/asound.h +++ b/include/sound/uapi/asound.h @@ -426,7 +426,8 @@ struct snd_pcm_hw_params { unsigned int rate_num; /* R: rate numerator */ unsigned int rate_den; /* R: rate denominator */ snd_pcm_uframes_t fifo_size; /* R: chip FIFO size in frames */ - unsigned char reserved[64]; /* reserved for future */ + unsigned char sync[16]; /* R: synchronization ID (perfect sync - one clock source) */ + unsigned char reserved[48]; /* reserved for future */ }; enum { diff --git a/src/pcm/pcm.c b/src/pcm/pcm.c index 62e76e7e..f8581191 100644 --- a/src/pcm/pcm.c +++ b/src/pcm/pcm.c @@ -494,8 +494,8 @@ software parameter. There are two functions allowing link multiple streams together. In the case, the linking means that all operations are synchronized. Because the drivers cannot guarantee the synchronization (sample resolution) on hardware -lacking this feature, the #snd_pcm_info_get_sync() function -returns synchronization ID - #snd_pcm_sync_id_t, which is equal +lacking this feature, the #snd_pcm_hw_params_get_sync() function +returns 16-byte synchronization ID, which is equal for hardware synchronized streams. When the #snd_pcm_link() function is called, all operations managing the stream state for these two streams are joined. The opposite function is #snd_pcm_unlink(). @@ -3948,6 +3948,25 @@ int snd_pcm_hw_params_get_fifo_size(const snd_pcm_hw_params_t *params) return params->fifo_size; } +/** + * \brief Get hardware synchronization ID from a PCM info container + * \param params Configuration space + * \return 16-byte synchronization ID (use #SND_PCM_HW_PARAMS_SYNC_SIZE) + * + * This synchronization ID determines the similar clocks for the + * PCM stream between multiple devices (including different cards). + * "All zeros" means "not set". The contents of the ID can be used + * only for a comparison with the contents of another ID returned + * from this function. Applications should not do a comparison with + * hard-coded values, because the implementation generating such + * synchronization IDs may be changed in future. + */ +const unsigned char *snd_pcm_hw_params_get_sync(const snd_pcm_hw_params_t *params) +{ + assert(params); + return params->sync; +} + /** * \brief Fill params with a full configuration space for a PCM * \param pcm PCM handle @@ -7332,7 +7351,7 @@ unsigned int snd_pcm_info_get_subdevices_avail(const snd_pcm_info_t *obj) } /** - * \brief Get hardware synchronization ID from a PCM info container + * \brief (DEPRECATED) Get hardware synchronization ID from a PCM info container * \param obj PCM info container * \return hardware synchronization ID */ @@ -7340,9 +7359,12 @@ snd_pcm_sync_id_t snd_pcm_info_get_sync(const snd_pcm_info_t *obj) { snd_pcm_sync_id_t res; assert(obj); - memcpy(&res, &obj->sync, sizeof(res)); + bzero(&res, sizeof(res)); return res; } +#ifndef DOC_HIDDEN +link_warning(snd_pcm_info_get_sync, "Warning: snd_pcm_info_get_sync is deprecated, consider to use snd_pcm_hw_params_get_sync"); +#endif /** * \brief Set wanted device inside a PCM info container (see #snd_ctl_pcm_info) -- 2.45.2

1 0

[PATCH v2 00/14] ASoC: Intel: Remove skylake driver
by Cezary Rojewski 20 Aug '24

20 Aug '24

A spiritual successor to haswell/baytrail removal series [1]. The avs-driver found in sound/soc/intel/avs is a direct replacement to the existing skylake-driver. It covers all features supported by it and more and aligns with the recommended flows and requirements based on Windows driver equivalent. The skylake-driver related UAPI has been removed with "ASoC: Drop soc-topology ABI v4 support" [2]. For the official kernel tree the deprecation begun with v6.0. Most skylake-drivers users moved to avs- or SOF-driver when AudioDSP capabilities are available on the platform or to snd-hda-intel (sound/pci/hda) when such capabilities are not. For the supported trees the deprecation begun with v5.4 with v5.15 being the first where the skylake-driver is disabled entirely. All machine board drivers that consume this DSP driver have their replacements present within sound/soc/intel/avs/boards/ directory. Changes in v2: - added two new patches (leading the series) - the first moves all device entries previously under the skylake-driver dependency under the avs-driver - the second patch drops struct skl_machine_pdata usage to fix compilation errors as pointed out by IKP - no further changes, retained Acked-by tags for these [1]: https://lore.kernel.org/alsa-devel/20201006064907.16277-1-cezary.rojewski@i… [2]: https://lore.kernel.org/alsa-devel/20240403091629.647267-1-cezary.rojewski@… Cezary Rojewski (14): ALSA: hda: Move SST device entries to AVS ASoC: Intel: Drop skl_machine_pdata usage ASoC: Intel: Remove bxt_rt298 board driver ASoC: Intel: Remove bxt_da7219_max98357a board driver ASoC: Intel: Remove kbl_rt5663_rt5514_max98927 board driver ASoC: Intel: Remove kbl_rt5663_max98927 board driver ASoC: Intel: Remove kbl_rt5660 board driver ASoC: Intel: Remove kbl_da7219_max98927 board driver ASoC: Intel: Remove kbl_da7219_max98357a board driver ASoC: Intel: Remove skl_rt286 board driver ASoC: Intel: Remove skl_nau88l25_ssm4567 board driver ASoC: Intel: Remove skl_nau88l25_max98357a board driver ASoC: Intel: Remove skylake driver ASoC: Intel: avs: Enable by default for all SST configurations sound/hda/intel-dsp-config.c | 111 +- sound/soc/intel/Kconfig | 120 - sound/soc/intel/Makefile | 1 - sound/soc/intel/avs/core.c | 8 +- sound/soc/intel/boards/Kconfig | 152 +- sound/soc/intel/boards/Makefile | 20 - sound/soc/intel/boards/bxt_da7219_max98357a.c | 720 ---- sound/soc/intel/boards/bxt_rt298.c | 670 --- sound/soc/intel/boards/kbl_da7219_max98357a.c | 688 ---- sound/soc/intel/boards/kbl_da7219_max98927.c | 1175 ------ sound/soc/intel/boards/kbl_rt5660.c | 567 --- sound/soc/intel/boards/kbl_rt5663_max98927.c | 1073 ----- .../intel/boards/kbl_rt5663_rt5514_max98927.c | 869 ---- .../soc/intel/boards/skl_nau88l25_max98357a.c | 704 ---- sound/soc/intel/boards/skl_nau88l25_ssm4567.c | 751 ---- sound/soc/intel/boards/skl_rt286.c | 568 --- .../intel/common/soc-acpi-intel-cnl-match.c | 6 - .../intel/common/soc-acpi-intel-ehl-match.c | 1 - .../intel/common/soc-acpi-intel-hda-match.c | 6 - .../intel/common/soc-acpi-intel-icl-match.c | 6 - .../intel/common/soc-acpi-intel-kbl-match.c | 11 - .../intel/common/soc-acpi-intel-skl-match.c | 5 - sound/soc/intel/skylake/Makefile | 15 - sound/soc/intel/skylake/bxt-sst.c | 629 --- sound/soc/intel/skylake/cnl-sst-dsp.c | 266 -- sound/soc/intel/skylake/cnl-sst-dsp.h | 103 - sound/soc/intel/skylake/cnl-sst.c | 508 --- sound/soc/intel/skylake/skl-debug.c | 248 -- sound/soc/intel/skylake/skl-i2s.h | 87 - sound/soc/intel/skylake/skl-messages.c | 1419 ------- sound/soc/intel/skylake/skl-nhlt.c | 269 -- sound/soc/intel/skylake/skl-pcm.c | 1507 ------- sound/soc/intel/skylake/skl-ssp-clk.c | 428 -- sound/soc/intel/skylake/skl-ssp-clk.h | 108 - sound/soc/intel/skylake/skl-sst-cldma.c | 373 -- sound/soc/intel/skylake/skl-sst-cldma.h | 243 -- sound/soc/intel/skylake/skl-sst-dsp.c | 462 --- sound/soc/intel/skylake/skl-sst-dsp.h | 256 -- sound/soc/intel/skylake/skl-sst-ipc.c | 1071 ----- sound/soc/intel/skylake/skl-sst-ipc.h | 169 - sound/soc/intel/skylake/skl-sst-utils.c | 425 -- sound/soc/intel/skylake/skl-sst.c | 599 --- sound/soc/intel/skylake/skl-topology.c | 3605 ----------------- sound/soc/intel/skylake/skl-topology.h | 524 --- sound/soc/intel/skylake/skl.c | 1177 ------ sound/soc/intel/skylake/skl.h | 207 - 46 files changed, 59 insertions(+), 22871 deletions(-) delete mode 100644 sound/soc/intel/boards/bxt_da7219_max98357a.c delete mode 100644 sound/soc/intel/boards/bxt_rt298.c delete mode 100644 sound/soc/intel/boards/kbl_da7219_max98357a.c delete mode 100644 sound/soc/intel/boards/kbl_da7219_max98927.c delete mode 100644 sound/soc/intel/boards/kbl_rt5660.c delete mode 100644 sound/soc/intel/boards/kbl_rt5663_max98927.c delete mode 100644 sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c delete mode 100644 sound/soc/intel/boards/skl_nau88l25_max98357a.c delete mode 100644 sound/soc/intel/boards/skl_nau88l25_ssm4567.c delete mode 100644 sound/soc/intel/boards/skl_rt286.c delete mode 100644 sound/soc/intel/skylake/Makefile delete mode 100644 sound/soc/intel/skylake/bxt-sst.c delete mode 100644 sound/soc/intel/skylake/cnl-sst-dsp.c delete mode 100644 sound/soc/intel/skylake/cnl-sst-dsp.h delete mode 100644 sound/soc/intel/skylake/cnl-sst.c delete mode 100644 sound/soc/intel/skylake/skl-debug.c delete mode 100644 sound/soc/intel/skylake/skl-i2s.h delete mode 100644 sound/soc/intel/skylake/skl-messages.c delete mode 100644 sound/soc/intel/skylake/skl-nhlt.c delete mode 100644 sound/soc/intel/skylake/skl-pcm.c delete mode 100644 sound/soc/intel/skylake/skl-ssp-clk.c delete mode 100644 sound/soc/intel/skylake/skl-ssp-clk.h delete mode 100644 sound/soc/intel/skylake/skl-sst-cldma.c delete mode 100644 sound/soc/intel/skylake/skl-sst-cldma.h delete mode 100644 sound/soc/intel/skylake/skl-sst-dsp.c delete mode 100644 sound/soc/intel/skylake/skl-sst-dsp.h delete mode 100644 sound/soc/intel/skylake/skl-sst-ipc.c delete mode 100644 sound/soc/intel/skylake/skl-sst-ipc.h delete mode 100644 sound/soc/intel/skylake/skl-sst-utils.c delete mode 100644 sound/soc/intel/skylake/skl-sst.c delete mode 100644 sound/soc/intel/skylake/skl-topology.c delete mode 100644 sound/soc/intel/skylake/skl-topology.h delete mode 100644 sound/soc/intel/skylake/skl.c delete mode 100644 sound/soc/intel/skylake/skl.h -- 2.25.1

4 19

[PATCH 00/12] ASoC: Intel: Remove skylake driver
by Cezary Rojewski 20 Aug '24

20 Aug '24

A spiritual successor to haswell/baytrail removal series [1]. The avs-driver found in sound/soc/intel/avs is a direct replacement to the existing skylake-driver. It covers all features supported by it and more and aligns with the recommended flows and requirements based on Windows driver equivalent. The skylake-driver related UAPI has been removed with "ASoC: Drop soc-topology ABI v4 support" [2]. For the official kernel tree the deprecation begun with v6.0. Most skylake-drivers users moved to avs- or SOF-driver when AudioDSP capabilities are available on the platform or to snd-hda-intel (sound/pci/hda) when such capabilities are not. For the supported trees the deprecation begun with v5.4 with v5.15 being the first where the skylake-driver is disabled entirely. All machine board drivers that consume this DSP driver have their replacements present within sound/soc/intel/avs/boards/ directory. [1]: https://lore.kernel.org/alsa-devel/20201006064907.16277-1-cezary.rojewski@i… [2]: https://lore.kernel.org/alsa-devel/20240403091629.647267-1-cezary.rojewski@… Cezary Rojewski (12): ASoC: Intel: Remove bxt_rt298 board driver ASoC: Intel: Remove bxt_da7219_max98357a board driver ASoC: Intel: Remove kbl_rt5663_rt5514_max98927 board driver ASoC: Intel: Remove kbl_rt5663_max98927 board driver ASoC: Intel: Remove kbl_rt5660 board driver ASoC: Intel: Remove kbl_da7219_max98927 board driver ASoC: Intel: Remove kbl_da7219_max98357a board driver ASoC: Intel: Remove skl_rt286 board driver ASoC: Intel: Remove skl_nau88l25_ssm4567 board driver ASoC: Intel: Remove skl_nau88l25_max98357a board driver ASoC: Intel: Remove skylake driver ASoC: Intel: avs: Enable by default for all SST configurations sound/soc/intel/Kconfig | 120 - sound/soc/intel/Makefile | 1 - sound/soc/intel/avs/core.c | 8 +- sound/soc/intel/boards/Kconfig | 152 +- sound/soc/intel/boards/Makefile | 20 - sound/soc/intel/boards/bxt_da7219_max98357a.c | 720 ---- sound/soc/intel/boards/bxt_rt298.c | 670 --- sound/soc/intel/boards/kbl_da7219_max98357a.c | 688 ---- sound/soc/intel/boards/kbl_da7219_max98927.c | 1175 ------ sound/soc/intel/boards/kbl_rt5660.c | 567 --- sound/soc/intel/boards/kbl_rt5663_max98927.c | 1073 ----- .../intel/boards/kbl_rt5663_rt5514_max98927.c | 869 ---- .../soc/intel/boards/skl_nau88l25_max98357a.c | 704 ---- sound/soc/intel/boards/skl_nau88l25_ssm4567.c | 751 ---- sound/soc/intel/boards/skl_rt286.c | 568 --- sound/soc/intel/skylake/Makefile | 15 - sound/soc/intel/skylake/bxt-sst.c | 629 --- sound/soc/intel/skylake/cnl-sst-dsp.c | 266 -- sound/soc/intel/skylake/cnl-sst-dsp.h | 103 - sound/soc/intel/skylake/cnl-sst.c | 508 --- sound/soc/intel/skylake/skl-debug.c | 248 -- sound/soc/intel/skylake/skl-i2s.h | 87 - sound/soc/intel/skylake/skl-messages.c | 1419 ------- sound/soc/intel/skylake/skl-nhlt.c | 269 -- sound/soc/intel/skylake/skl-pcm.c | 1507 ------- sound/soc/intel/skylake/skl-ssp-clk.c | 428 -- sound/soc/intel/skylake/skl-ssp-clk.h | 108 - sound/soc/intel/skylake/skl-sst-cldma.c | 373 -- sound/soc/intel/skylake/skl-sst-cldma.h | 243 -- sound/soc/intel/skylake/skl-sst-dsp.c | 462 --- sound/soc/intel/skylake/skl-sst-dsp.h | 256 -- sound/soc/intel/skylake/skl-sst-ipc.c | 1071 ----- sound/soc/intel/skylake/skl-sst-ipc.h | 169 - sound/soc/intel/skylake/skl-sst-utils.c | 425 -- sound/soc/intel/skylake/skl-sst.c | 599 --- sound/soc/intel/skylake/skl-topology.c | 3605 ----------------- sound/soc/intel/skylake/skl-topology.h | 524 --- sound/soc/intel/skylake/skl.c | 1177 ------ sound/soc/intel/skylake/skl.h | 207 - 39 files changed, 9 insertions(+), 22775 deletions(-) delete mode 100644 sound/soc/intel/boards/bxt_da7219_max98357a.c delete mode 100644 sound/soc/intel/boards/bxt_rt298.c delete mode 100644 sound/soc/intel/boards/kbl_da7219_max98357a.c delete mode 100644 sound/soc/intel/boards/kbl_da7219_max98927.c delete mode 100644 sound/soc/intel/boards/kbl_rt5660.c delete mode 100644 sound/soc/intel/boards/kbl_rt5663_max98927.c delete mode 100644 sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c delete mode 100644 sound/soc/intel/boards/skl_nau88l25_max98357a.c delete mode 100644 sound/soc/intel/boards/skl_nau88l25_ssm4567.c delete mode 100644 sound/soc/intel/boards/skl_rt286.c delete mode 100644 sound/soc/intel/skylake/Makefile delete mode 100644 sound/soc/intel/skylake/bxt-sst.c delete mode 100644 sound/soc/intel/skylake/cnl-sst-dsp.c delete mode 100644 sound/soc/intel/skylake/cnl-sst-dsp.h delete mode 100644 sound/soc/intel/skylake/cnl-sst.c delete mode 100644 sound/soc/intel/skylake/skl-debug.c delete mode 100644 sound/soc/intel/skylake/skl-i2s.h delete mode 100644 sound/soc/intel/skylake/skl-messages.c delete mode 100644 sound/soc/intel/skylake/skl-nhlt.c delete mode 100644 sound/soc/intel/skylake/skl-pcm.c delete mode 100644 sound/soc/intel/skylake/skl-ssp-clk.c delete mode 100644 sound/soc/intel/skylake/skl-ssp-clk.h delete mode 100644 sound/soc/intel/skylake/skl-sst-cldma.c delete mode 100644 sound/soc/intel/skylake/skl-sst-cldma.h delete mode 100644 sound/soc/intel/skylake/skl-sst-dsp.c delete mode 100644 sound/soc/intel/skylake/skl-sst-dsp.h delete mode 100644 sound/soc/intel/skylake/skl-sst-ipc.c delete mode 100644 sound/soc/intel/skylake/skl-sst-ipc.h delete mode 100644 sound/soc/intel/skylake/skl-sst-utils.c delete mode 100644 sound/soc/intel/skylake/skl-sst.c delete mode 100644 sound/soc/intel/skylake/skl-topology.c delete mode 100644 sound/soc/intel/skylake/skl-topology.h delete mode 100644 sound/soc/intel/skylake/skl.c delete mode 100644 sound/soc/intel/skylake/skl.h -- 2.25.1

3 14

[REGRESSION] ALSA: firewire-lib: heavy digital distortion with Fireface 800
by edmund.raile 20 Aug '24

20 Aug '24

Between the kernel releases 6.9.9 and 6.10.0, something changed that causes heavy digital distortion on playback from at least ALSA and PipeWire. The rhythm of the music is discernable in the output, so it isn't just random noise. It sounds a bit like bitcrushing, but not quite. The generated overtones appear to be dependet on the sample rate. I am sorry I can not be more specific, there are no kernel messages this time. As Mr. Sakamoto recently committed all these changes to firewire he might be able to identify the issue easily, which is why I'd like to ask him to look into it. Kind regards, Edmund Raile. #regzbot introduced: v6.9.9..v6.10

2 1

[PATCH v1] ASoc: tas2781: fixed the issue that the chip do not shutdown immediatly after aplay stopped
by Shenghao Ding 20 Aug '24

20 Aug '24

Issue reported from customer that the chip do not shutdown after aplay stopped until 6 mins later. Drop tasdevice_dapm_event and implement .stream_mute in the tasdevice_dai_ops. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v1: - Drop tasdevice_dapm_event and implement .stream_mute in the tasdevice_dai_ops - Remove unnecessary line feed for tasdevice_codec_remove --- sound/soc/codecs/tas2781-i2c.c | 23 ++++++++--------------- 1 file changed, 8 insertions(+), 15 deletions(-) diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index 9a32e0504857..145c45349399 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -557,30 +557,22 @@ static void tasdevice_fw_ready(const struct firmware *fmw, release_firmware(fmw); } -static int tasdevice_dapm_event(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *kcontrol, int event) +static int tasdevice_mute(struct snd_soc_dai *dai, int mute, int stream) { - struct snd_soc_component *codec = snd_soc_dapm_to_component(w->dapm); + struct snd_soc_component *codec = dai->component; struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec); - int state = 0; - /* Codec Lock Hold */ - mutex_lock(&tas_priv->codec_lock); - if (event == SND_SOC_DAPM_PRE_PMD) - state = 1; - tasdevice_tuning_switch(tas_priv, state); - /* Codec Lock Release*/ - mutex_unlock(&tas_priv->codec_lock); + /* Codec Lock/UnLock */ + guard(mutex)(&tas_priv->codec_lock); + tasdevice_tuning_switch(tas_priv, mute); return 0; } static const struct snd_soc_dapm_widget tasdevice_dapm_widgets[] = { SND_SOC_DAPM_AIF_IN("ASI", "ASI Playback", 0, SND_SOC_NOPM, 0, 0), - SND_SOC_DAPM_AIF_OUT_E("ASI OUT", "ASI Capture", 0, SND_SOC_NOPM, - 0, 0, tasdevice_dapm_event, - SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), - SND_SOC_DAPM_SPK("SPK", tasdevice_dapm_event), + SND_SOC_DAPM_AIF_OUT("ASI OUT", "ASI Capture", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_SPK("SPK", NULL), SND_SOC_DAPM_OUTPUT("OUT"), SND_SOC_DAPM_INPUT("DMIC") }; @@ -667,6 +659,7 @@ static const struct snd_soc_dai_ops tasdevice_dai_ops = { .startup = tasdevice_startup, .hw_params = tasdevice_hw_params, .set_sysclk = tasdevice_set_dai_sysclk, + .mute_stream = tasdevice_mute, }; static struct snd_soc_dai_driver tasdevice_dai_driver[] = { -- 2.34.1

3 3

[PATCH v7 2/2] ARM: dts: imx6: update spdif sound card node properties
by Elinor Montmasson 20 Aug '24

20 Aug '24

The merge of imx-spdif driver into fsl-asoc-card brought new DT properties that can be used with the "fsl,imx-audio-spdif" compatible: * The "spdif-controller" property from imx-spdif is named "audio-cpu" in fsl-asoc-card. * fsl-asoc-card uses codecs explicitly declared in DT with "audio-codec". With an S/PDIF, codec drivers spdif_transmitter and spdif_receiver should be used. Driver imx-spdif used instead the dummy codec and a pair of boolean properties, "spdif-in" and "spdif-out". While backward compatibility is kept to support properties "spdif-controller", "spdif-in" and "spdif-out", using new properties has several benefits: * "audio-cpu" and "audio-codec" are more generic names reflecting that the fsl-asoc-card driver supports multiple hardware. They are properties already used by devices using the fsl-asoc-card driver. They are also similar to properties of simple-card: "cpu" and "codec". * "spdif-in" and "spdif-out" imply the use of the dummy codec in the driver. However, there are already two codec drivers for the S/PDIF, spdif_transmitter and spdif_receiver. It is better to declare S/PDIF Tx and Rx devices in a DT, and then reference them with "audio-codec" than using the dummy codec. For those reasons, this commit updates in-tree DTs to use the new properties: * Rename "spdif-controller" property to "audio-cpu". * Declare S/PDIF transmitter and/or receiver devices, and use them with the "audio-codec" property instead of "spdif-out" and/or "spdif-in". These modifications were tested only on an imx8mn-evk board. Note that out-of-tree and old DTs are still supported. Signed-off-by: Elinor Montmasson <elinor.montmasson(a)savoirfairelinux.com> --- arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts | 15 ++++++++++++--- arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts | 15 ++++++++++++--- arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts | 9 +++++++-- arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi | 15 ++++++++++++--- arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi | 9 +++++++-- arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi | 15 ++++++++++++--- arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi | 9 +++++++-- .../boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi | 9 +++++++-- arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi | 9 +++++++-- arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi | 9 +++++++-- arch/arm/boot/dts/nxp/imx/imx6sx-sabreauto.dts | 9 +++++++-- arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi | 9 +++++++-- 12 files changed, 104 insertions(+), 28 deletions(-) diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts index 95b49fc83f7b..299106fbe51c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts @@ -127,12 +127,21 @@ simple-audio-card,codec { }; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + spdif_in: spdif-in { + compatible = "linux,spdif-dir"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-out; - spdif-in; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>, <&spdif_in>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts b/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts index a7d5693c5ab7..8d2b608e0b90 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts @@ -111,12 +111,21 @@ simple-audio-card,codec { }; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + spdif_in: spdif-in { + compatible = "linux,spdif-dir"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-in; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>, <&spdif_in>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts index 7c298d9aa21e..5353a0c24420 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts @@ -90,11 +90,16 @@ sound-sgtl5000 { ssi-controller = <&ssi1>; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "On-board SPDIF"; - spdif-controller = <&spdif>; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi index ea40623d12e5..edf55760a5c1 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi @@ -197,11 +197,20 @@ sound { ssi-controller = <&ssi1>; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + spdif_in: spdif-in { + compatible = "linux,spdif-dir"; + #sound-dai-cells = <0>; + }; + sound_spdif: sound-spdif { compatible = "fsl,imx-audio-spdif"; - spdif-controller = <&spdif>; - spdif-in; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>, <&spdif_in>; model = "imx-spdif"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi index 3a46ade3b6bd..9e97ef5e43f2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi @@ -121,11 +121,16 @@ sound { mux-ext-port = <3>; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi index d3a7a6eeb8e0..b01670cdd52c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi @@ -142,12 +142,21 @@ sound { ssi-controller = <&ssi1>; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + spdif_in: spdif-in { + compatible = "linux,spdif-dir"; + #sound-dai-cells = <0>; + }; + /* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 or 168 */ sound_spdif: sound-spdif { compatible = "fsl,imx-audio-spdif"; - spdif-controller = <&spdif>; - spdif-in; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>, <&spdif_in>; model = "imx-spdif"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi index 761566ae3cf5..bd66430c1d78 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi @@ -100,12 +100,17 @@ v_usb1: regulator-v-usb1 { vin-supply = <&v_5v0>; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "Integrated SPDIF"; /* IMX6 doesn't implement this yet */ - spdif-controller = <&spdif>; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>; }; gpio-keys { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi index a955c77cd499..d1ad65ab6b72 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi @@ -140,12 +140,17 @@ sound_codec: simple-audio-card,codec { }; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "On-board SPDIF"; /* IMX6 doesn't implement this yet */ - spdif-controller = <&spdif>; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi index 0a3deaf92eea..55fb7b904220 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi @@ -143,12 +143,17 @@ sound-cs42888 { "AIN2R", "Line In Jack"; }; + spdif_in: spdif-in { + compatible = "linux,spdif-dir"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-sabreauto-spdif", "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-in; + audio-cpu = <&spdif>; + audio-codec = <&spdif_in>; }; backlight { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi index 38abb6b50f6c..7130b9c3b3aa 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi @@ -26,11 +26,16 @@ sound { mux-ext-port = <3>; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>; }; reg_1p5v: regulator-1p5v { diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sabreauto.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-sabreauto.dts index b0c27b9b0244..dfbfb8119bf3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sx-sabreauto.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sabreauto.dts @@ -97,11 +97,16 @@ sound-cs42888 { "AIN2R", "Line In Jack"; }; + spdif_in: spdif-in { + compatible = "linux,spdif-dir"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-in; + audio-cpu = <&spdif>; + audio-codec = <&spdif_in>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi index 7d4170c27732..277a6e039045 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi @@ -183,12 +183,17 @@ panel_in: endpoint { }; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx6sx-sdb-spdif", "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>; }; }; -- 2.34.1

1 0

[PATCH v7 1/2] arm64: dts: imx8m: update spdif sound card node properties
by Elinor Montmasson 20 Aug '24

20 Aug '24

The merge of imx-spdif driver into fsl-asoc-card brought new DT properties that can be used with the "fsl,imx-audio-spdif" compatible: * The "spdif-controller" property from imx-spdif is named "audio-cpu" in fsl-asoc-card. * fsl-asoc-card uses codecs explicitly declared in DT with "audio-codec". With an S/PDIF, codec drivers spdif_transmitter and spdif_receiver should be used. Driver imx-spdif used instead the dummy codec and a pair of boolean properties, "spdif-in" and "spdif-out". While backward compatibility is kept to support properties "spdif-controller", "spdif-in" and "spdif-out", using new properties has several benefits: * "audio-cpu" and "audio-codec" are more generic names reflecting that the fsl-asoc-card driver supports multiple hardware. They are properties already used by devices using the fsl-asoc-card driver. They are also similar to properties of simple-card: "cpu" and "codec". * "spdif-in" and "spdif-out" imply the use of the dummy codec in the driver. However, there are already two codec drivers for the S/PDIF, spdif_transmitter and spdif_receiver. It is better to declare S/PDIF Tx and Rx devices in a DT, and then reference them with "audio-codec" than using the dummy codec. For those reasons, this commit updates in-tree DTs to use the new properties: * Rename "spdif-controller" property to "audio-cpu". * Declare S/PDIF transmitter and/or receiver devices, and use them with the "audio-codec" property instead of "spdif-out" and/or "spdif-in". These modifications were tested only on an imx8mn-evk board. Note that out-of-tree and old DTs are still supported. Signed-off-by: Elinor Montmasson <elinor.montmasson(a)savoirfairelinux.com> --- arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 15 +++++++++--- arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi | 15 +++++++++--- arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 24 +++++++++++++++---- 3 files changed, 43 insertions(+), 11 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi index 930e14fec423..5f8336217bb8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi @@ -180,12 +180,21 @@ cpu { }; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + spdif_in: spdif-in { + compatible = "linux,spdif-dir"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif1>; - spdif-out; - spdif-in; + audio-cpu = <&spdif1>; + audio-codec = <&spdif_out>, <&spdif_in>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi index 9e0259ddf4bc..33d73f3dc187 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi @@ -124,12 +124,21 @@ sound-wm8524 { "Line Out Jack", "LINEVOUTR"; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + spdif_in: spdif-in { + compatible = "linux,spdif-dir"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif1>; - spdif-out; - spdif-in; + audio-cpu = <&spdif1>; + audio-codec = <&spdif_out>, <&spdif_in>; }; sound-micfil { diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index 7507548cdb16..a87d0692c3bb 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -125,19 +125,33 @@ link_codec: simple-audio-card,codec { }; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + spdif_in: spdif-in { + compatible = "linux,spdif-dir"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif1>; - spdif-out; - spdif-in; + audio-cpu = <&spdif1>; + audio-codec = <&spdif_out>, <&spdif_in>; + }; + + hdmi_arc_in: hdmi-arc-in { + compatible = "linux,spdif-dir"; + #sound-dai-cells = <0>; }; sound-hdmi-arc { compatible = "fsl,imx-audio-spdif"; model = "imx-hdmi-arc"; - spdif-controller = <&spdif2>; - spdif-in; + audio-cpu = <&spdif2>; + audio-codec = <&hdmi_arc_in>; }; }; -- 2.34.1

1 0

[PATCH] ASoc: tas2781: replace devm_kzalloc and scnprintf with devm_kasprintf
by Shenghao Ding 20 Aug '24

20 Aug '24

Replace devm_kzalloc and scnprintf with devm_kasprintf. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- sound/soc/codecs/tas2781-i2c.c | 23 ++++++++++------------- 1 file changed, 10 insertions(+), 13 deletions(-) diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index 9a32e0504857..1451ba0fa5b4 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -346,13 +346,11 @@ static int tasdevice_create_control(struct tasdevice_priv *tas_priv) } /* Create a mixer item for selecting the active profile */ - name = devm_kzalloc(tas_priv->dev, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, - GFP_KERNEL); + name = devm_kasprintf(tas_priv->dev, GFP_KERNEL, "Speaker Profile Id"); if (!name) { ret = -ENOMEM; goto out; } - scnprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, "Speaker Profile Id"); prof_ctrls[mix_index].name = name; prof_ctrls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER; prof_ctrls[mix_index].info = tasdevice_info_profile; @@ -441,18 +439,13 @@ static int tasdevice_dsp_create_ctrls(struct tasdevice_priv *tas_priv) goto out; } - /* Create a mixer item for selecting the active profile */ - prog_name = devm_kzalloc(tas_priv->dev, - SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL); - conf_name = devm_kzalloc(tas_priv->dev, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, - GFP_KERNEL); - if (!prog_name || !conf_name) { + /* Create mixer items for selecting the active Program and Config */ + prog_name = devm_kasprintf(tas_priv->dev, GFP_KERNEL, + "Speaker Program Id"); + if (!prog_name) { ret = -ENOMEM; goto out; } - - scnprintf(prog_name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, - "Speaker Program Id"); dsp_ctrls[mix_index].name = prog_name; dsp_ctrls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER; dsp_ctrls[mix_index].info = tasdevice_info_programs; @@ -460,8 +453,12 @@ static int tasdevice_dsp_create_ctrls(struct tasdevice_priv *tas_priv) dsp_ctrls[mix_index].put = tasdevice_program_put; mix_index++; - scnprintf(conf_name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, + conf_name = devm_kasprintf(tas_priv->dev, GFP_KERNEL, "Speaker Config Id"); + if (!conf_name) { + ret = -ENOMEM; + goto out; + } dsp_ctrls[mix_index].name = conf_name; dsp_ctrls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER; dsp_ctrls[mix_index].info = tasdevice_info_configurations; -- 2.34.1

3 2

[PATCH] soundwire: qcom: Use devm_clk_get_enabled() helpers
by Huan Yang 20 Aug '24

20 Aug '24

The devm_clk_get_enabled() helpers: - call devm_clk_get() - call clk_prepare_enable() and register what is needed in order to call clk_disable_unprepare() when needed, as a managed resource. This simplifies the code and avoids the calls to clk_disable_unprepare(). Signed-off-by: Huan Yang <link(a)vivo.com> --- drivers/soundwire/qcom.c | 22 ++++++++-------------- 1 file changed, 8 insertions(+), 14 deletions(-) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index aed57002fd0e..2a57ed9464b4 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -1527,24 +1527,22 @@ static int qcom_swrm_probe(struct platform_device *pdev) if (IS_ERR(ctrl->audio_cgcr)) { dev_err(dev, "Failed to get cgcr reset ctrl required for SW gating\n"); ret = PTR_ERR(ctrl->audio_cgcr); - goto err_init; + return ret; } } ctrl->irq = of_irq_get(dev->of_node, 0); if (ctrl->irq < 0) { ret = ctrl->irq; - goto err_init; + return ret; } - ctrl->hclk = devm_clk_get(dev, "iface"); + ctrl->hclk = devm_clk_get_enabled(dev, "iface"); if (IS_ERR(ctrl->hclk)) { ret = dev_err_probe(dev, PTR_ERR(ctrl->hclk), "unable to get iface clock\n"); - goto err_init; + return ret; } - clk_prepare_enable(ctrl->hclk); - ctrl->dev = dev; dev_set_drvdata(&pdev->dev, ctrl); mutex_init(&ctrl->port_lock); @@ -1558,7 +1556,7 @@ static int qcom_swrm_probe(struct platform_device *pdev) ret = qcom_swrm_get_port_config(ctrl); if (ret) - goto err_clk; + return ret; params = &ctrl->bus.params; params->max_dr_freq = DEFAULT_CLK_FREQ; @@ -1586,7 +1584,7 @@ static int qcom_swrm_probe(struct platform_device *pdev) "soundwire", ctrl); if (ret) { dev_err(dev, "Failed to request soundwire irq\n"); - goto err_clk; + return ret; } ctrl->wake_irq = of_irq_get(dev->of_node, 1); @@ -1597,7 +1595,7 @@ static int qcom_swrm_probe(struct platform_device *pdev) "swr_wake_irq", ctrl); if (ret) { dev_err(dev, "Failed to request soundwire wake irq\n"); - goto err_init; + return ret; } } @@ -1612,7 +1610,7 @@ static int qcom_swrm_probe(struct platform_device *pdev) if (ret) { dev_err(dev, "Failed to register Soundwire controller (%d)\n", ret); - goto err_clk; + return ret; } qcom_swrm_init(ctrl); @@ -1642,9 +1640,6 @@ static int qcom_swrm_probe(struct platform_device *pdev) err_master_add: sdw_bus_master_delete(&ctrl->bus); -err_clk: - clk_disable_unprepare(ctrl->hclk); -err_init: return ret; } @@ -1653,7 +1648,6 @@ static void qcom_swrm_remove(struct platform_device *pdev) struct qcom_swrm_ctrl *ctrl = dev_get_drvdata(&pdev->dev); sdw_bus_master_delete(&ctrl->bus); - clk_disable_unprepare(ctrl->hclk); } static int __maybe_unused swrm_runtime_resume(struct device *dev) -- 2.45.2

1 0

[PATCH v3 0/8] MSM8953/MSM8976 ASoC support
by Adam Skladowski 20 Aug '24

20 Aug '24

Introduce support for basic sound card setup on MSM8953/MSM8976 platforms, document new compatibles and introduce support for more dais. Most of code is sourced from msm8953-mainline fork over github with some changes implemented by me,some basic changes are mentioned in each patch. Changes since v2 =============== 1. Guarded ioremap on quinary mux with checking if resource is not NULL 2. Introduced compatible based reg overriding in wcd-analog driver 3. Separated PM8950/PM8953 codec patches 4. Moved reg/reg-names back into top-level and rewrote as in comments 5. Separated MSM8953/MSM8976 QDSP6 patches 6. Added Lineout patch [1] - https://lore.kernel.org/lkml/20240723083300.35605-1-krzysztof.kozlowski@lin… Changes since v1 ================ 1. Rebased dt-bindings documentation based on Krzysztof's split patch[1] 2. Resolved clang errors by guarding ret verification inside if 3. Switched quin-iomux to devm_ioremap_resource to not fail on msm8916 Signed-off-by: Adam Skladowski <a39.skl(a)gmail.com> --- Adam Skladowski (4): ASoC: dt-bindings: pm8916-wcd-analog-codec: Document pm8950/pm8953 ASoC: msm8916-wcd-analog: add pm8950 codec ASoC: dt-bindings: apq8016-sbc: Add msm8953/msm8976-qdsp6-sndcard ASoC: qcom: apq8016_sbc: Add support for msm8976 SoC Vladimir Lypak (4): ASoC: qcom: apq8016_sbc.c: Add Quinary support ASoC: msm8916-wcd-analog: add pm8953 codec ASoC: qcom: apq8016_sbc: Add support for msm8953 SoC ASoC: msm8916-wcd-analog: add lineout output .../bindings/sound/qcom,apq8016-sbc-sndcard.yaml | 27 ++++ .../sound/qcom,pm8916-wcd-analog-codec.yaml | 6 +- sound/soc/codecs/msm8916-wcd-analog.c | 145 ++++++++++++++++++++- sound/soc/qcom/apq8016_sbc.c | 88 ++++++++++++- 4 files changed, 257 insertions(+), 9 deletions(-) --- base-commit: 31c2a5c4bf3673b0bf098f358ea931b9ada1e7de change-id: 20240729-msm8953-msm8976-asoc-65f973a13165 Best regards, -- Adam Skladowski <a39.skl(a)gmail.com>

6 21