April 2024 - Alsa-devel - mailman.alsa-project.org

[PATCH 00/17] ASoC: SOF: Intel: improve SoundWire support for LunarLake
by Pierre-Louis Bossart 03 Apr '24

03 Apr '24

This patchset contains important updates for SoundWire support. We initially implemented support for multiple amplifiers on different links using a single HDaudio DMA transfer. To align with the other OS, the 'aggregation' is now supported by the firmware. This change in directions has kernel impacts, since we now have multiple HDaudio DMAs to program and start, but since there are no platforms released so far there's no end-user impact. In addition, the behavior in case of xruns is improved by clearing the PCM states and better handling of the hw_free case. Note that the hw_free support will compile but will only be functional with the companion patch "soundwire: intel: add intel_free_stream() back" already applied in the SoundWire tree. Bard Liao (5): Revert "ASoC: SOF: Intel: hda-dai-ops: reset device count for SoundWire DAIs" Revert "ASoC: SOF: Intel: hda-dai-ops: only allocate/release streams for first CPU DAI" ASoC: SOF: make dma_config_tlv be an array ASoC: SOF: Intel: hda-dai: set lowest N bits in ch_mask ASoC: SOF: Intel: hda-dai: set dma_stream_channel_map device Pierre-Louis Bossart (10): ASoC: SOF: Intel: hda-dai: fix channel map configuration for aggregated dailink ASoC: SOF: Intel: hda-dai: add helpers to set dai config ASoC: SOF: Intel: set the DMA TLV device as dai_index ASoC: SOF: Intel: hda: extend signature of sdw_hda_dai_hw_params() ASoC: SOF: IPC4: extend dai_data with node_id ASoC: SOF: Intel: hda: move helper to static inline ASoC: SOF: sof-audio: revisit sof_pcm_stream_free() error handling and logs ASoC: SOF: pcm: simplify sof_pcm_hw_free() with helper ASoC: SOF: pcm: add pending_stop state variable ASoC: SOF: pcm: reset all PCM sources in case of xruns Ranjani Sridharan (2): ASoC: SOF: Intel: hda: Clear Soundwire node ID during BE DAI hw_free ASoC: SOF: ipc4-topology: Save the ALH DAI index during hw_params sound/soc/sof/intel/hda-dai-ops.c | 41 +--------- sound/soc/sof/intel/hda-dai.c | 124 +++++++++++++++++++++++------- sound/soc/sof/intel/hda.c | 29 ++++++- sound/soc/sof/intel/hda.h | 11 ++- sound/soc/sof/ipc4-topology.c | 62 ++++++++++----- sound/soc/sof/ipc4-topology.h | 3 +- sound/soc/sof/pcm.c | 58 +++++++------- sound/soc/sof/sof-audio.c | 29 +++++-- sound/soc/sof/sof-audio.h | 2 + 9 files changed, 232 insertions(+), 127 deletions(-) -- 2.40.1

2 18

[PATCH 0/4] ASoC: SOF: cppcheck fixes and debugfs addition
by Pierre-Louis Bossart 03 Apr '24

03 Apr '24

Small changes with 3 cppcheck fixes and the firmware version now visible with debugfs instead of only via dmesg logs. Pierre-Louis Bossart (3): ASoC: SOF: amd: acp-loader: abort firmware download on write error ASoC: SOF: ipc4-priv: align prototype and function declaration ASoC: SOF: ipc4-topology: remove shadowed variable Yong Zhi (1): ASoC: SOF: ipc4-loader: save FW version info to debugfs sound/soc/sof/amd/acp-loader.c | 2 ++ sound/soc/sof/ipc4-loader.c | 8 ++++++++ sound/soc/sof/ipc4-priv.h | 2 +- sound/soc/sof/ipc4-topology.c | 1 - 4 files changed, 11 insertions(+), 2 deletions(-) -- 2.40.1

2 5

[PATCH v2 0/3] ASoC: Use snd_ctl_find_id_mixer() instead of open-coding
by Richard Fitzgerald 03 Apr '24

03 Apr '24

The first two patches change snd_soc_card_get_kcontrol() to use the core snd_ctl_find_id_mixer() functionality instead of open-coding its own list walk. The last patch adds a KUnit test for this, which was tested on the original and modified code. Changes in V2: Only change is in the KUnit test (patch #3) to make the const strings more consty. Richard Fitzgerald (3): ALSA: control: Introduce snd_ctl_find_id_mixer_locked() ASoC: soc-card: Use snd_ctl_find_id_mixer() instead of open-coding ASoC: soc-card: Add KUnit test case for snd_soc_card_get_kcontrol include/sound/control.h | 23 +++++ sound/soc/Kconfig | 8 ++ sound/soc/Makefile | 4 + sound/soc/soc-card-test.c | 184 ++++++++++++++++++++++++++++++++++++++ sound/soc/soc-card.c | 21 +---- 5 files changed, 223 insertions(+), 17 deletions(-) create mode 100644 sound/soc/soc-card-test.c -- 2.39.2

3 5

[PATCH 0/4] ASoC: codecs: ES8326: solve some hp issues and
by Zhang Yi 02 Apr '24

02 Apr '24

We solved some issues related to headphone detection.And for using the same configuration in different power conditions,we modified the clock table Zhang Yi (4): ASoC: codecs: ES8326: Solve error interruption issue ASoC: codecs: ES8326: modify clock table ASoC: codecs: ES8326: Solve a headphone detection issue after suspend and resume ASoC: codecs: ES8326: Removing the control of ADC_SCALE sound/soc/codecs/es8326.c | 37 +++++++++++++++++++++---------------- sound/soc/codecs/es8326.h | 2 +- 2 files changed, 22 insertions(+), 17 deletions(-) -- 2.17.1

2 5

[PATCH] ASoC: Intel: avs: boards: Add modules description
by Amadeusz Sławiński 02 Apr '24

02 Apr '24

Modpost warns about missing module description, add it. Reviewed-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> --- sound/soc/intel/avs/boards/da7219.c | 1 + sound/soc/intel/avs/boards/dmic.c | 1 + sound/soc/intel/avs/boards/es8336.c | 1 + sound/soc/intel/avs/boards/i2s_test.c | 1 + sound/soc/intel/avs/boards/max98357a.c | 1 + sound/soc/intel/avs/boards/max98373.c | 1 + sound/soc/intel/avs/boards/max98927.c | 1 + sound/soc/intel/avs/boards/nau8825.c | 1 + sound/soc/intel/avs/boards/probe.c | 1 + sound/soc/intel/avs/boards/rt274.c | 1 + sound/soc/intel/avs/boards/rt286.c | 1 + sound/soc/intel/avs/boards/rt298.c | 1 + sound/soc/intel/avs/boards/rt5514.c | 1 + sound/soc/intel/avs/boards/rt5663.c | 1 + sound/soc/intel/avs/boards/rt5682.c | 1 + sound/soc/intel/avs/boards/ssm4567.c | 1 + 16 files changed, 16 insertions(+) diff --git a/sound/soc/intel/avs/boards/da7219.c b/sound/soc/intel/avs/boards/da7219.c index c018f84fe0252..fc072dc58968c 100644 --- a/sound/soc/intel/avs/boards/da7219.c +++ b/sound/soc/intel/avs/boards/da7219.c @@ -296,5 +296,6 @@ static struct platform_driver avs_da7219_driver = { module_platform_driver(avs_da7219_driver); +MODULE_DESCRIPTION("Intel da7219 machine driver"); MODULE_AUTHOR("Cezary Rojewski <cezary.rojewski(a)intel.com>"); MODULE_LICENSE("GPL"); diff --git a/sound/soc/intel/avs/boards/dmic.c b/sound/soc/intel/avs/boards/dmic.c index ba2bc7f689eb6..d9e5e85f52335 100644 --- a/sound/soc/intel/avs/boards/dmic.c +++ b/sound/soc/intel/avs/boards/dmic.c @@ -96,4 +96,5 @@ static struct platform_driver avs_dmic_driver = { module_platform_driver(avs_dmic_driver); +MODULE_DESCRIPTION("Intel DMIC machine driver"); MODULE_LICENSE("GPL"); diff --git a/sound/soc/intel/avs/boards/es8336.c b/sound/soc/intel/avs/boards/es8336.c index 1090082e7d5bf..5c90a60075773 100644 --- a/sound/soc/intel/avs/boards/es8336.c +++ b/sound/soc/intel/avs/boards/es8336.c @@ -326,4 +326,5 @@ static struct platform_driver avs_es8336_driver = { module_platform_driver(avs_es8336_driver); +MODULE_DESCRIPTION("Intel es8336 machine driver"); MODULE_LICENSE("GPL"); diff --git a/sound/soc/intel/avs/boards/i2s_test.c b/sound/soc/intel/avs/boards/i2s_test.c index 282256d18cc69..d419556856643 100644 --- a/sound/soc/intel/avs/boards/i2s_test.c +++ b/sound/soc/intel/avs/boards/i2s_test.c @@ -125,4 +125,5 @@ static struct platform_driver avs_i2s_test_driver = { module_platform_driver(avs_i2s_test_driver); +MODULE_DESCRIPTION("Intel i2s test machine driver"); MODULE_LICENSE("GPL"); diff --git a/sound/soc/intel/avs/boards/max98357a.c b/sound/soc/intel/avs/boards/max98357a.c index a83b95f25129f..1ff85e4d8e160 100644 --- a/sound/soc/intel/avs/boards/max98357a.c +++ b/sound/soc/intel/avs/boards/max98357a.c @@ -154,4 +154,5 @@ static struct platform_driver avs_max98357a_driver = { module_platform_driver(avs_max98357a_driver) +MODULE_DESCRIPTION("Intel max98357a machine driver"); MODULE_LICENSE("GPL"); diff --git a/sound/soc/intel/avs/boards/max98373.c b/sound/soc/intel/avs/boards/max98373.c index 3b980a025e6f6..8d31586b73eae 100644 --- a/sound/soc/intel/avs/boards/max98373.c +++ b/sound/soc/intel/avs/boards/max98373.c @@ -211,4 +211,5 @@ static struct platform_driver avs_max98373_driver = { module_platform_driver(avs_max98373_driver) +MODULE_DESCRIPTION("Intel max98373 machine driver"); MODULE_LICENSE("GPL"); diff --git a/sound/soc/intel/avs/boards/max98927.c b/sound/soc/intel/avs/boards/max98927.c index 86dd2b228df3a..572ec58073d06 100644 --- a/sound/soc/intel/avs/boards/max98927.c +++ b/sound/soc/intel/avs/boards/max98927.c @@ -208,4 +208,5 @@ static struct platform_driver avs_max98927_driver = { module_platform_driver(avs_max98927_driver) +MODULE_DESCRIPTION("Intel max98927 machine driver"); MODULE_LICENSE("GPL"); diff --git a/sound/soc/intel/avs/boards/nau8825.c b/sound/soc/intel/avs/boards/nau8825.c index 1c1e2083f474d..55db75efae414 100644 --- a/sound/soc/intel/avs/boards/nau8825.c +++ b/sound/soc/intel/avs/boards/nau8825.c @@ -313,4 +313,5 @@ static struct platform_driver avs_nau8825_driver = { module_platform_driver(avs_nau8825_driver) +MODULE_DESCRIPTION("Intel nau8825 machine driver"); MODULE_LICENSE("GPL"); diff --git a/sound/soc/intel/avs/boards/probe.c b/sound/soc/intel/avs/boards/probe.c index a9469b5ecb402..8be6887bbc6e8 100644 --- a/sound/soc/intel/avs/boards/probe.c +++ b/sound/soc/intel/avs/boards/probe.c @@ -69,4 +69,5 @@ static struct platform_driver avs_probe_mb_driver = { module_platform_driver(avs_probe_mb_driver); +MODULE_DESCRIPTION("Intel probe machine driver"); MODULE_LICENSE("GPL"); diff --git a/sound/soc/intel/avs/boards/rt274.c b/sound/soc/intel/avs/boards/rt274.c index bfcb8845fd15d..1cf5242160875 100644 --- a/sound/soc/intel/avs/boards/rt274.c +++ b/sound/soc/intel/avs/boards/rt274.c @@ -276,4 +276,5 @@ static struct platform_driver avs_rt274_driver = { module_platform_driver(avs_rt274_driver); +MODULE_DESCRIPTION("Intel rt274 machine driver"); MODULE_LICENSE("GPL"); diff --git a/sound/soc/intel/avs/boards/rt286.c b/sound/soc/intel/avs/boards/rt286.c index 28d7d86b1cc99..4740bba105703 100644 --- a/sound/soc/intel/avs/boards/rt286.c +++ b/sound/soc/intel/avs/boards/rt286.c @@ -247,4 +247,5 @@ static struct platform_driver avs_rt286_driver = { module_platform_driver(avs_rt286_driver); +MODULE_DESCRIPTION("Intel rt286 machine driver"); MODULE_LICENSE("GPL"); diff --git a/sound/soc/intel/avs/boards/rt298.c b/sound/soc/intel/avs/boards/rt298.c index 80f490b9e1184..6e409e29f6974 100644 --- a/sound/soc/intel/avs/boards/rt298.c +++ b/sound/soc/intel/avs/boards/rt298.c @@ -266,4 +266,5 @@ static struct platform_driver avs_rt298_driver = { module_platform_driver(avs_rt298_driver); +MODULE_DESCRIPTION("Intel rt298 machine driver"); MODULE_LICENSE("GPL"); diff --git a/sound/soc/intel/avs/boards/rt5514.c b/sound/soc/intel/avs/boards/rt5514.c index 60105f453ae23..097ae5f73241e 100644 --- a/sound/soc/intel/avs/boards/rt5514.c +++ b/sound/soc/intel/avs/boards/rt5514.c @@ -192,4 +192,5 @@ static struct platform_driver avs_rt5514_driver = { module_platform_driver(avs_rt5514_driver); +MODULE_DESCRIPTION("Intel rt5514 machine driver"); MODULE_LICENSE("GPL"); diff --git a/sound/soc/intel/avs/boards/rt5663.c b/sound/soc/intel/avs/boards/rt5663.c index b4762c2a7bf2d..1880c315cc4d1 100644 --- a/sound/soc/intel/avs/boards/rt5663.c +++ b/sound/soc/intel/avs/boards/rt5663.c @@ -265,4 +265,5 @@ static struct platform_driver avs_rt5663_driver = { module_platform_driver(avs_rt5663_driver); +MODULE_DESCRIPTION("Intel rt5663 machine driver"); MODULE_LICENSE("GPL"); diff --git a/sound/soc/intel/avs/boards/rt5682.c b/sound/soc/intel/avs/boards/rt5682.c index 243f979fda98a..594a971ded9eb 100644 --- a/sound/soc/intel/avs/boards/rt5682.c +++ b/sound/soc/intel/avs/boards/rt5682.c @@ -341,5 +341,6 @@ static struct platform_driver avs_rt5682_driver = { module_platform_driver(avs_rt5682_driver) +MODULE_DESCRIPTION("Intel rt5682 machine driver"); MODULE_AUTHOR("Cezary Rojewski <cezary.rojewski(a)intel.com>"); MODULE_LICENSE("GPL"); diff --git a/sound/soc/intel/avs/boards/ssm4567.c b/sound/soc/intel/avs/boards/ssm4567.c index abb87bb88fffe..9e78a3b912087 100644 --- a/sound/soc/intel/avs/boards/ssm4567.c +++ b/sound/soc/intel/avs/boards/ssm4567.c @@ -197,4 +197,5 @@ static struct platform_driver avs_ssm4567_driver = { module_platform_driver(avs_ssm4567_driver) +MODULE_DESCRIPTION("Intel ssm4567 machine driver"); MODULE_LICENSE("GPL"); -- 2.34.1

2 1

[PATCH v12] ASoc: tas2783: Add tas2783 codec driver
by Shenghao Ding 02 Apr '24

02 Apr '24

The tas2783 is a smart audio amplifier with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, and I2S/TDM interfaces designed for portable applications. An on-chip DSP supports Texas Instruments SmartAmp speaker protection algorithm. The integrated speaker voltage and current sense provides for real-time monitoring of loudspeakers. The ASoC component provides the majority of the functionality of the device, all the audio functions. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- Change in v12: - simplify tasdevice_set_sdw_stream - fixed some Linux coding style - fixed the spelling mistakes - Select left/right channel based on unique id - a longer description has been added - remove unused crc8 in KCONFIG - Invert of RE here means reciprocal of RE - correct indentation - correct the wrong pow calibrated register - correct comment on RESET register - fixed usually lines don't end with an open parenthesis - fixed tasdevice_sdw_shutdown - use defines for function, entity, etc. for readable - remove unnecessary codec_lock in component_probe() - remove struct sdw_stream_data - remove unused macro definitions - use BIT(2) and BIT(1) instead of 0x2 and 0x1 - implement pm_runtime - reg_start is u8, reg_start + i only adds i byte, it should be reg_start + i * 4, because the calibration values - fixed total_sz in tas2783_calibration - add a define for TASDEVICE_REG(0, 0, 0x0a) - rework macro style in header file - Add select CRC32 - rewrite the mute and the return value handling - Add comments on bin file - Add link_id into the fw name to distinguish the same sdw id on different sdw id. - remove unnecessary mutex_lock - use set_active() in tasdevice_io_init and move all other parts in the probe. - move pm_runtime_get_noresume to the probe - fix the return value of putvol function - add put_noidle in tasdevice_sdw_remove - remove unused header file(of.h) - correct the style of the multi-line comment - Set the readable registers in tas2783_readable_register for debugfs - Use new PM macros - Use default put and get inline SOC_SINGLE_RANGE_TLV and SOC_SINGLE_SX_TLV - Use respective %pt to log the calibrated time - Remove unnecessary struct tm - Add trailing comma tasdevice_dapm_widgets and tasdevice_audio_map - Rewrite the return value handling in tasdevice_sdw_probe - use dev_num instead of id.unique_id - rework the log - Add code to check the size of calibrated data in UEFI - Add description of Layout of calibrated Data in UEFI - switch back link_id and unique_id to identify the devcie - unique_id offset as the device index of the calibrated data - update calibrated data layout stored in UEFI, add link_id and unique_id into the calibrated data in case of tas2783 sitting in different SDQW buses. - correct the wrong unique_id - set the unique_id as hex style in dsp bin file name - use __func__ in the dev_err message in two identical logs intas2783_apply_calibv1/v2. - In tas2783_apply_calibv2, the very least move initializations to a different line. - No need for separate j variable, reuse i in tasdevice_read_prop. - remove unused "struct sdw_bus_params params", unsigned char dev_name[32] pstream, and chip_id - define dspfw_binaryname as a local variable in tasdevice_comp_probe. - reduce a lot of indentation in tasdevice_mute and spilte tasdevice_mute into tasdevice_enable_echo_ref and tasdevice_playback - remove tas2783_reg_defaults - use REGCACHE_MAPLE instead of REGCACHE_RBTREE - define fw_node_sz to store the node size - remove "struct snd_soc_component *component" - Add some SDCA registers as readable - remove unnecessary dev_dbg log for timestamp - playback still work without calibrated data stored in UEFI, for example bypass mode. Even if in case of dsp mode, algo can still work with default calibrated data. So, not an error, use dev_info for them --- sound/soc/codecs/Kconfig | 16 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tas2783-sdw.c | 892 +++++++++++++++++++++++++++++++++ sound/soc/codecs/tas2783.h | 106 ++++ 4 files changed, 1016 insertions(+) create mode 100644 sound/soc/codecs/tas2783-sdw.c create mode 100644 sound/soc/codecs/tas2783.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index f78ea2f86fa6..939384837d5e 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -248,6 +248,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_TAS2781_COMLIB imply SND_SOC_TAS2781_FMWLIB imply SND_SOC_TAS2781_I2C + imply SND_SOC_TAS2783 imply SND_SOC_TAS5086 imply SND_SOC_TAS571X imply SND_SOC_TAS5720 @@ -1880,6 +1881,21 @@ config SND_SOC_TAS2781_I2C algo coefficient setting, for one, two or even multiple TAS2781 chips. +config SND_SOC_TAS2783 + tristate "Texas Instruments TAS2783 speaker amplifier (sdw)" + depends on SOUNDWIRE + depends on EFI + select REGMAP + select REGMAP_SOUNDWIRE + select CRC32 + select CRC32_SARWATE + help + Enable support for Texas Instruments TAS2783 Smart Amplifier + Digital input mono Class-D and DSP-inside audio power amplifiers. + TAS2783 supports the MIPI SoundWire v1.2 compatible interface + for audio and control data. At the end of calibrated data appends + the crc data with crc32_sarwate for error detection. + config SND_SOC_TAS5086 tristate "Texas Instruments TAS5086 speaker amplifier" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 7c075539dc47..6f27f810affc 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -287,6 +287,7 @@ snd-soc-tas2770-objs := tas2770.o snd-soc-tas2781-comlib-objs := tas2781-comlib.o snd-soc-tas2781-fmwlib-objs := tas2781-fmwlib.o snd-soc-tas2781-i2c-objs := tas2781-i2c.o +snd-soc-tas2783-objs := tas2783-sdw.o snd-soc-tfa9879-objs := tfa9879.o snd-soc-tfa989x-objs := tfa989x.o snd-soc-tlv320adc3xxx-objs := tlv320adc3xxx.o @@ -672,6 +673,7 @@ obj-$(CONFIG_SND_SOC_TAS2780) += snd-soc-tas2780.o obj-$(CONFIG_SND_SOC_TAS2781_COMLIB) += snd-soc-tas2781-comlib.o obj-$(CONFIG_SND_SOC_TAS2781_FMWLIB) += snd-soc-tas2781-fmwlib.o obj-$(CONFIG_SND_SOC_TAS2781_I2C) += snd-soc-tas2781-i2c.o +obj-$(CONFIG_SND_SOC_TAS2783) += snd-soc-tas2783.o obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o obj-$(CONFIG_SND_SOC_TAS571X) += snd-soc-tas571x.o obj-$(CONFIG_SND_SOC_TAS5720) += snd-soc-tas5720.o diff --git a/sound/soc/codecs/tas2783-sdw.c b/sound/soc/codecs/tas2783-sdw.c new file mode 100644 index 000000000000..429191b79f8d --- /dev/null +++ b/sound/soc/codecs/tas2783-sdw.c @@ -0,0 +1,892 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// ALSA SoC Texas Instruments TAS2783 Audio Smart Amplifier +// +// Copyright (C) 2023 - 2024 Texas Instruments Incorporated +// https://www.ti.com +// +// Author: Baojun Xu <baojun.xu(a)ti.com> +// Kevin Lu <kevin-lu(a)ti.com> +// Shenghao Ding <shenghao-ding(a)ti.com> +// + +#include <asm/unaligned.h> +#include <linux/acpi.h> +#include <linux/crc32.h> +#include <linux/efi.h> +#include <linux/err.h> +#include <linux/firmware.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> +#include <linux/soundwire/sdw.h> +#include <linux/soundwire/sdw_registers.h> +#include <linux/soundwire/sdw_type.h> +#include <sound/pcm_params.h> +#include <sound/sdw.h> +#include <sound/soc.h> +#include <sound/tlv.h> + +#include <sound/tas2781-tlv.h> +#include "tas2783.h" + +struct calibdatav2_info { + unsigned int number_of_devices; + unsigned int crc32_pos; + unsigned int byt_sz; + unsigned int *cali_data; +}; + +static const unsigned int tas2783_cali_reg[] = { + TAS2783_CALIBRATION_RE, /* Resistance */ + TAS2783_CALIBRATION_RE_LOW, /* Low limitation of RE */ + TAS2783_CALIBRATION_INV_RE, /* Reciprocal of RE */ + TAS2783_CALIBRATION_POW, /* RMS Power */ + TAS2783_CALIBRATION_TLIMIT /* Temperature limitation */ +}; + +static bool tas2783_readable_register(struct device *dev, + unsigned int reg) +{ + switch (reg) { + case 0x8000 ... 0x807F: + case SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, TAS2783_SDCA_ENT_FU21, + TAS2783_SDCA_CTL_FU_MUTE, 0): + case SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, TAS2783_SDCA_ENT_FU21, + TAS2783_SDCA_CTL_FU_VOLUME, 0): + case SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, TAS2783_SDCA_ENT_FU23, + TAS2783_SDCA_CTL_FU_MUTE, 0): + return true; + default: + return false; + } +} + +static bool tas2783_volatile_register(struct device *dev, + unsigned int reg) +{ + switch (reg) { + /* + * Only software reset register was volatiled. + * Bit is self clearing. + * 0b = Don't reset + * 1b = reset + */ + case 0x8001: + return true; + default: + return false; + } +} + +static const struct regmap_config tasdevice_regmap = { + .reg_bits = 32, + .val_bits = 8, + .readable_reg = tas2783_readable_register, + .volatile_reg = tas2783_volatile_register, + .max_register = 0x44ffffff, + .cache_type = REGCACHE_MAPLE, + .use_single_read = true, + .use_single_write = true, +}; + +static const struct snd_kcontrol_new tas2783_snd_controls[] = { + SOC_SINGLE_RANGE_TLV("Digital Volume", TAS2783_DVC_LVL, + 0, 0, 200, 1, dvc_tlv), + SOC_SINGLE_SX_TLV("Amp Gain Volume", TAS2783_AMP_LEVEL, + 1, 0, 20, amp_vol_tlv), +}; + +/* + * Load the calibration data, including speaker impedance, f0, etc. + * Calibration is done by the manufacturer in the factory. The calibration + * data are used by the algorithm for calculating the speaker temperature, + * speaker membrane excursion and f0 in real time during playback. + * The DSP will work with default data values if calibrated data are + * missing or are invalid. + * Layout of calibrated Data V1 in UEFI(total 256 bytes): + * Calibrated Data of Dev 0(unique_id offset 0) (20 bytes) + * Calibrated Data of Dev 1(unique_id offset 1) (20 bytes) + * Calibrated Data of Dev 2(unique_id offset 2) (20 bytes) + * Calibrated Data of Dev 3(unique_id offset 3) (20 bytes) + * Calibrated Data of Dev 4(unique_id offset 4) (20 bytes) + * Calibrated Data of Dev 5(unique_id offset 5) (20 bytes) + * Calibrated Data of Dev 6(unique_id offset 6) (20 bytes) + * Calibrated Data of Dev 7(unique_id offset 7) (20 bytes) + * TimeStamp of Calibration (4 bytes) + * CRC (4 bytes) + * Reserved (88 bytes) + */ +static void tas2783_apply_calibv1(struct tasdevice_priv *tas_dev, + unsigned int *cali_data) +{ + struct regmap *map = tas_dev->regmap; + u8 *cali_start; + u16 offset; + int ret; + + if (!tas_dev->sdw_peripheral) { + dev_err(tas_dev->dev, "%s: peripheral doesn't exist.\n", + __func__); + return; + } + + offset = tas_dev->sdw_peripheral->id.unique_id - + TAS2783_UNIQUE_ID_BASE; + if (offset >= TAS2783_MAX_DEV_NUM) { + dev_err(tas_dev->dev, "%s: offset(%u) is out of range.\n", + __func__, offset); + return; + } + + /* + * The area saving tas2783 calibrated data is specified by its + * unique_id offset. cali_start is the first address of current + * tas2783's calibrated data. + */ + cali_start = (u8 *)(cali_data + offset * sizeof(tas2783_cali_reg)); + for (int i = 0; i < ARRAY_SIZE(tas2783_cali_reg); i++) { + ret = regmap_bulk_write(map, tas2783_cali_reg[i], + &cali_start[4 * i], 4); + if (ret) { + dev_err(tas_dev->dev, "%s: Cali failed %x:%d\n", + __func__, tas2783_cali_reg[i], ret); + break; + } + } +} + +/* + * New features were added in calibrated Data V2: + * 1. Added some the fields to store the link_id and uniqie_id for + * multi-link solutions + * 2. Support flexible number of devices instead of fixed one in V1. + * Layout of calibrated data V2 in UEFI(total 256 bytes): + * ChipID (2783, 4 bytes) + * Device-Sum (4 bytes) + * TimeStamp of Calibration (4 bytes) + * for (i = 0; i < Device-Sum; i++) { + * Device #i index_info () { + * SDW link id (2bytes) + * SDW unique_id (2bytes) + * } + * Calibrated Data of Device #i (20 bytes) + * } + * CRC (4 bytes) + * Reserved (the rest) + */ +static void tas2783_apply_calibv2(struct tasdevice_priv *tas_dev, + unsigned int *tmp_val) +{ + const unsigned int arr_size = ARRAY_SIZE(tas2783_cali_reg); + const struct calibdatav2_info calib_info = { + .number_of_devices = tmp_val[1], + .crc32_pos = 3 + tmp_val[1] * 6, + .byt_sz = 12 + tmp_val[1] * 24, + .cali_data = &tmp_val[3] + }; + struct regmap *map = tas_dev->regmap; + unsigned int i, j, k, crc; + u8 *cali_start; + u16 dev_indx; + int ret; + + if (!tas_dev->sdw_peripheral) { + dev_err(tas_dev->dev, "%s: peripheral doesn't exist.\n", + __func__); + return; + } + + if (calib_info.number_of_devices > TAS2783_MAX_DEV_NUM || + calib_info.number_of_devices == 0) { + dev_info(tas_dev->dev, + "using default calibration data, wrong data in EFI."); + return; + } + crc = crc32(~0, tmp_val, calib_info.byt_sz) ^ ~0; + if (crc != tmp_val[calib_info.crc32_pos]) { + dev_info(tas_dev->dev, + "using default calibration data, crc not match."); + return; + } + + dev_indx = tas_dev->sdw_peripheral->bus->link_id | + tas_dev->sdw_peripheral->id.unique_id << 16; + + for (i = 0; i < calib_info.number_of_devices; i++) { + k = i * (arr_size + 1); + + if (dev_indx != calib_info.cali_data[k]) + continue; + + /* +1: skip 4 byte dev-indx info */ + cali_start = (u8 *)&calib_info.cali_data[k + 1]; + + for (j = 0; j < arr_size; j++) { + k = 4 * j; + ret = regmap_bulk_write(map, tas2783_cali_reg[j], + &cali_start[k], 4); + if (ret) { + dev_err(tas_dev->dev, + "%s: Cali data writing failed %x:%d\n", + __func__, tas2783_cali_reg[j], ret); + break; + } + } + return; + } +} + +static void tas2783_calibration(struct tasdevice_priv *tas_dev) +{ + efi_guid_t efi_guid = EFI_GUID(0x1f52d2a1, 0xbb3a, 0x457d, 0xbc, + 0x09, 0x43, 0xa3, 0xf4, 0x31, 0x0a, 0x92); + static efi_char16_t efi_name[] = L"CALI_DATA"; + struct calibration_data cali_data; + unsigned int *tmp_val; + unsigned int crc; + efi_status_t status; + + cali_data.total_sz = 0; + + status = efi.get_variable(efi_name, &efi_guid, NULL, + &cali_data.total_sz, NULL); + if (status == EFI_BUFFER_TOO_SMALL + && cali_data.total_sz < TAS2783_MAX_CALIDATA_SIZE) { + status = efi.get_variable(efi_name, &efi_guid, NULL, + &cali_data.total_sz, + cali_data.data); + dev_dbg(tas_dev->dev, "%s: cali get %lx bytes result:%ld\n", + __func__, cali_data.total_sz, status); + } + if (status != 0) { + /* Failed got calibration data from EFI. */ + dev_dbg(tas_dev->dev, "No calibration data in UEFI."); + return; + } + + tmp_val = (unsigned int *)cali_data.data; + + /* Check Calibrated Data V1 */ + crc = crc32(~0, cali_data.data, TAS2783_CALIDATAV1_BYTE_SIZE) ^ ~0; + if (crc == tmp_val[TAS2783_CALIDATAV1_CRC32_INDX]) { + /* Date and time of when calibration was done. */ + tas2783_apply_calibv1(tas_dev, tmp_val); + return; + } + + /* Check Calibrated Data V2 */ + if (tmp_val[0] != 2783) { + dev_err(tas_dev->dev, "No tas2783 calibration data\n"); + return; + } + + tas2783_apply_calibv2(tas_dev, tmp_val); +} + +static void tasdevice_dspfw_ready(const struct firmware *fmw, + void *context) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + struct regmap *map = tas_dev->regmap; + struct tas2783_firmware_node *p; + unsigned char *buf; + int fw_node_sz = sizeof(struct tas2783_firmware_node); + int img_sz, ret; + int offset = 0; + + if (!fmw || !fmw->data) { + dev_warn(tas_dev->dev, + "%s: failed to read fw, work in bypass-dsp mode.\n", + __func__); + return; + } + buf = (unsigned char *)fmw->data; + + img_sz = get_unaligned_le32(&buf[offset]); + offset += sizeof(img_sz); + if (img_sz != fmw->size) { + dev_warn(tas_dev->dev, "%s: size not matching, %d %u.", + __func__, (int)fmw->size, img_sz); + return; + } + + while (offset < img_sz) { + p = (struct tas2783_firmware_node *)(buf + offset); + if (p->length > 1) + ret = regmap_bulk_write(map, p->download_addr, + buf + offset + fw_node_sz, p->length); + else + ret = regmap_write(map, p->download_addr, + *(buf + offset + fw_node_sz)); + + if (ret != 0) { + dev_dbg(tas_dev->dev, + "%s: load FW fail: %d, work in bypass.\n", + __func__, ret); + return; + } + offset += fw_node_sz + p->length; + } + + tas2783_calibration(tas_dev); +} + +static const struct snd_soc_dapm_widget tasdevice_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("ASI", "ASI Playback", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT("ASI OUT", "ASI Capture", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_OUTPUT("OUT"), + SND_SOC_DAPM_INPUT("DMIC"), +}; + +static const struct snd_soc_dapm_route tasdevice_audio_map[] = { + {"OUT", NULL, "ASI"}, + {"ASI OUT", NULL, "DMIC"}, +}; + +static int tasdevice_set_sdw_stream(struct snd_soc_dai *dai, + void *sdw_stream, int direction) +{ + snd_soc_dai_dma_data_set(dai, direction, sdw_stream); + + return 0; +} + +static void tasdevice_sdw_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + snd_soc_dai_set_dma_data(dai, substream, NULL); +} + +static int tasdevice_sdw_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct tasdevice_priv *tas_priv = + snd_soc_component_get_drvdata(component); + struct sdw_stream_config stream_config = {0}; + struct sdw_port_config port_config = {0}; + struct sdw_stream_runtime *sdw_stream; + int ret; + + dev_dbg(dai->dev, "%s: dai_name %s", __func__, dai->name); + sdw_stream = snd_soc_dai_get_dma_data(dai, substream); + + if (!sdw_stream) + return -EINVAL; + + if (!tas_priv->sdw_peripheral) + return -EINVAL; + + /* SoundWire specific configuration */ + snd_sdw_params_to_config(substream, params, + &stream_config, &port_config); + + /* port 1 for playback */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + port_config.num = 1; + else + port_config.num = 2; + + ret = sdw_stream_add_slave(tas_priv->sdw_peripheral, + &stream_config, &port_config, 1, sdw_stream); + if (ret) { + dev_err(dai->dev, "%s: Unable to configure port\n", __func__); + return ret; + } + + dev_dbg(dai->dev, "%s: format: %i rate: %i\n", __func__, + params_format(params), params_rate(params)); + + return 0; +} + +static int tasdevice_sdw_pcm_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct tasdevice_priv *tas_priv = + snd_soc_component_get_drvdata(component); + struct sdw_stream_runtime *sdw_stream = + snd_soc_dai_get_dma_data(dai, substream); + + if (!tas_priv->sdw_peripheral) + return -EINVAL; + + sdw_stream_remove_slave(tas_priv->sdw_peripheral, sdw_stream); + + return 0; +} + +/* Capture stream is the echo ref data for voice mode.*/ +static int tasdevice_enable_echo_ref(struct tasdevice_priv *tas_dev, + int mute) +{ + struct regmap *map = tas_dev->regmap; + unsigned int val; + int ret; + + if (mute) + val = TAS2783_REG_AEF_INACTIVE; + else + val = TAS2783_REG_AEF_ACTIVE; + + ret = regmap_update_bits(map, TAS2873_REG_PWR_CTRL, + TAS2783_REG_AEF_MASK, TAS2783_REG_AEF_INACTIVE); + if (ret) + dev_err(tas_dev->dev, "%s: Disable AEF failed.\n", __func__); + + return ret; +} + +static int tasdevice_playback(struct tasdevice_priv *tas_dev, int mute) +{ + struct regmap *map = tas_dev->regmap; + int ret; + + if (mute) { + /* FU23 mute (0x40400108) */ + ret = regmap_write(map, + SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, + TAS2783_SDCA_ENT_FU23, + TAS2783_SDCA_CTL_FU_MUTE, 0), 1); + if (ret) { + dev_err(tas_dev->dev, "%s: FU23 mute failed.\n", + __func__); + goto out; + } + + ret = regmap_update_bits(map, TAS2873_REG_PWR_CTRL, + TAS2783_REG_PWR_MODE_MASK | + TAS2783_REG_AEF_MASK, + TAS2783_REG_PWR_MODE_ACTIVE | + TAS2783_REG_PWR_MODE_SW_PWD); + if (ret) { + dev_err(tas_dev->dev, "%s: shutdown failed.\n", + __func__); + } + } else { + /* FU23 Unmute, 0x40400108. */ + ret = regmap_write(map, + SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, + TAS2783_SDCA_ENT_FU23, + TAS2783_SDCA_CTL_FU_MUTE, 0), 0); + if (ret) { + dev_err(tas_dev->dev, + "%s: FU23 Unmute failed.\n", __func__); + goto out; + } + ret = regmap_update_bits(map, TAS2873_REG_PWR_CTRL, + TAS2783_REG_PWR_MODE_MASK, + TAS2783_REG_PWR_MODE_ACTIVE); + if (ret) { + dev_err(tas_dev->dev, + "%s: PWR Unmute failed.\n", __func__); + } + } +out: + return ret; +} + +static int tasdevice_mute(struct snd_soc_dai *dai, int mute, + int direction) +{ + struct snd_soc_component *component = dai->component; + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(component); + + int ret; + + dev_dbg(tas_dev->dev, "%s: %d.\n", __func__, mute); + + if (direction == SNDRV_PCM_STREAM_CAPTURE) + ret = tasdevice_enable_echo_ref(tas_dev, mute); + else + ret = tasdevice_playback(tas_dev, mute); + + if (ret) + dev_err(tas_dev->dev, "Mute or unmute %d failed %d.\n", + mute, ret); + + return ret; +} + +static const struct snd_soc_dai_ops tasdevice_dai_ops = { + .mute_stream = tasdevice_mute, + .hw_params = tasdevice_sdw_hw_params, + .hw_free = tasdevice_sdw_pcm_hw_free, + .set_stream = tasdevice_set_sdw_stream, + .shutdown = tasdevice_sdw_shutdown, +}; + +static struct snd_soc_dai_driver tasdevice_dai_driver[] = { + { + .name = "tas2783-codec", + .id = 0, + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 4, + .rates = TAS2783_DEVICE_RATES, + .formats = TAS2783_DEVICE_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 4, + .rates = TAS2783_DEVICE_RATES, + .formats = TAS2783_DEVICE_FORMATS, + }, + .ops = &tasdevice_dai_ops, + .symmetric_rate = 1, + }, +}; + +static int tasdevice_comp_probe(struct snd_soc_component *comp) +{ + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(comp); + unsigned char dspfw_binaryname[TAS2783_DSPFW_FILENAME_LEN]; + acpi_handle handle = ACPI_HANDLE(tas_dev->dev); + const struct firmware *fw_entry = NULL; + const char *sub = NULL; + int ret; + + if (handle) { + sub = acpi_get_subsystem_id(handle); + if (IS_ERR(sub)) + sub = NULL; + } + + /* + * Each tas2783 in the system has its own dspfw. + */ + if (comp->name_prefix) { + /* + * name_prefix.bin stores the dsp firmware including speaker + * protection algorithm, audio acoustic algorithm, speaker + * characters and algorithm params, it must be copied into + * firmware folder. + */ + scnprintf(dspfw_binaryname, TAS2783_DSPFW_FILENAME_LEN, + "%s-tas2783.bin", comp->name_prefix); + } else { + /* Compatible with the previous naming rule */ + if (sub) { + /* + * subsys_id-link_id[0,1,...,N]-unique_id + * [0x8,...,0xf].bin stores the dsp firmware including + * speaker protection algorithm, audio acoustic + * algorithm, speaker characters and algorithm params, + * it must be copied into firmware folder. + */ + scnprintf(dspfw_binaryname, TAS2783_DSPFW_FILENAME_LEN, + "%s-%d-0x%x.bin", sub, + tas_dev->sdw_peripheral->bus->link_id, + tas_dev->sdw_peripheral->id.unique_id); + } else { + /* + * tas2783-link_id[0,1,...,N]-unique_id + * [0x8,...,0xf].bin stores the dsp firmware including + * speaker protection algorithm, audio acoustic + * algorithm, speaker characters and algorithm params, + * it must be copied into firmware folder. + */ + scnprintf(dspfw_binaryname, TAS2783_DSPFW_FILENAME_LEN, + "tas2783-%d-0x%x.bin", + tas_dev->sdw_peripheral->bus->link_id, + tas_dev->sdw_peripheral->id.unique_id); + } + } + + ret = request_firmware(&fw_entry, dspfw_binaryname, tas_dev->dev); + if (ret) { + dev_err(tas_dev->dev, + "%s: request_firmware %x open status: %d.\n", __func__, + tas_dev->sdw_peripheral->id.unique_id, ret); + goto out; + } + + tasdevice_dspfw_ready(fw_entry, tas_dev); + +out: + if (fw_entry) + release_firmware(fw_entry); + return 0; +} + +static const struct snd_soc_component_driver + soc_codec_driver_tasdevice = { + .probe = tasdevice_comp_probe, + .controls = tas2783_snd_controls, + .num_controls = ARRAY_SIZE(tas2783_snd_controls), + .dapm_widgets = tasdevice_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(tasdevice_dapm_widgets), + .dapm_routes = tasdevice_audio_map, + .num_dapm_routes = ARRAY_SIZE(tasdevice_audio_map), + .idle_bias_on = 1, + .endianness = 1, +}; + +static int tasdevice_init(struct tasdevice_priv *tas_dev) +{ + int ret; + + dev_set_drvdata(tas_dev->dev, tas_dev); + + ret = devm_snd_soc_register_component(tas_dev->dev, + &soc_codec_driver_tasdevice, tasdevice_dai_driver, + ARRAY_SIZE(tasdevice_dai_driver)); + if (ret) { + dev_err(tas_dev->dev, "%s: codec register error:%d.\n", + __func__, ret); + return ret; + } + + /* set autosuspend parameters */ + pm_runtime_set_autosuspend_delay(tas_dev->dev, 3000); + pm_runtime_use_autosuspend(tas_dev->dev); + + /* make sure the device does not suspend immediately */ + pm_runtime_mark_last_busy(tas_dev->dev); + pm_runtime_enable(tas_dev->dev); + + return 0; +} + +static int tasdevice_read_prop(struct sdw_slave *slave) +{ + struct sdw_slave_prop *prop = &slave->prop; + struct sdw_dpn_prop *dpn; + unsigned long addr; + int nval, i; + u32 bit; + + prop->scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY; + prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY; + + prop->paging_support = true; + + /* first we need to allocate memory for set bits in port lists */ + prop->source_ports = BIT(2); /* BITMAP: 00000100 */ + prop->sink_ports = BIT(1); /* BITMAP: 00000010 */ + + nval = hweight32(prop->source_ports); + prop->src_dpn_prop = devm_kcalloc(&slave->dev, nval, + sizeof(*prop->src_dpn_prop), GFP_KERNEL); + if (!prop->src_dpn_prop) + return -ENOMEM; + + i = 0; + dpn = prop->src_dpn_prop; + addr = prop->source_ports; + for_each_set_bit(bit, &addr, 32) { + dpn[i].num = bit; + dpn[i].type = SDW_DPN_FULL; + dpn[i].simple_ch_prep_sm = true; + dpn[i].ch_prep_timeout = 10; + i++; + } + + /* do this again for sink now */ + nval = hweight32(prop->sink_ports); + prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval, + sizeof(*prop->sink_dpn_prop), GFP_KERNEL); + if (!prop->sink_dpn_prop) + return -ENOMEM; + + i = 0; + dpn = prop->sink_dpn_prop; + addr = prop->sink_ports; + for_each_set_bit(bit, &addr, 32) { + dpn[i].num = bit; + dpn[i].type = SDW_DPN_FULL; + dpn[i].simple_ch_prep_sm = true; + dpn[i].ch_prep_timeout = 10; + i++; + } + + /* set the timeout values */ + prop->clk_stop_timeout = 20; + + return 0; +} + +static int tasdevice_io_init(struct device *dev, + struct sdw_slave *slave) +{ + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev); + int ret; + + regcache_cache_only(tas_priv->regmap, false); + + if (tas_priv->first_hw_init) { + regcache_cache_bypass(tas_priv->regmap, true); + } else { + /* + * PM runtime is only enabled when a Slave reports as Attached + * Update count of parent 'active' children. + */ + pm_runtime_set_active(&slave->dev); + } + + /* sw reset */ + ret = regmap_write(tas_priv->regmap, TAS2873_REG_SWRESET, + TAS2873_REG_SWRESET_RESET); + if (ret) { + dev_err(tas_priv->dev, "Reset failed.\n"); + goto out; + } + + if (tas_priv->first_hw_init) { + regcache_cache_bypass(tas_priv->regmap, false); + regcache_mark_dirty(tas_priv->regmap); + } + + tas_priv->first_hw_init = true; + tas_priv->hw_init = true; + +out: + return ret; +} + +static int tasdevice_update_status(struct sdw_slave *slave, + enum sdw_slave_status status) +{ + struct tasdevice_priv *tas_priv = dev_get_drvdata(&slave->dev); + + if (status == SDW_SLAVE_UNATTACHED) + tas_priv->hw_init = false; + /* + * Perform initialization only if slave status + * is present and hw_init flag is false + */ + if (tas_priv->hw_init || status != SDW_SLAVE_ATTACHED) + return 0; + + /* perform I/O transfers required for Slave initialization */ + return tasdevice_io_init(&slave->dev, slave); +} + +/* + * slave_ops: callbacks for get_clock_stop_mode, clock_stop and + * port_prep are not defined for now + */ +static const struct sdw_slave_ops tasdevice_sdw_ops = { + .read_prop = tasdevice_read_prop, + .update_status = tasdevice_update_status, +}; + +static int tasdevice_sdw_probe(struct sdw_slave *peripheral, + const struct sdw_device_id *id) +{ + struct device *dev = &peripheral->dev; + struct tasdevice_priv *tas_dev; + + tas_dev = devm_kzalloc(dev, sizeof(*tas_dev), GFP_KERNEL); + if (!tas_dev) + return -ENOMEM; + + tas_dev->dev = dev; + tas_dev->sdw_peripheral = peripheral; + /* + * Mark hw_init to false + * HW init will be performed when device reports present + */ + tas_dev->hw_init = false; + tas_dev->first_hw_init = false; + + dev_set_drvdata(dev, tas_dev); + + tas_dev->regmap = devm_regmap_init_sdw(peripheral, &tasdevice_regmap); + if (IS_ERR(tas_dev->regmap)) + return dev_err_probe(dev, PTR_ERR(tas_dev->regmap), + "Failed devm_regmap_init_sdw."); + + return tasdevice_init(tas_dev); +} + +static int tasdevice_sdw_remove(struct sdw_slave *peripheral) +{ + struct tasdevice_priv *tas_dev = dev_get_drvdata(&peripheral->dev); + + if (tas_dev->first_hw_init) + pm_runtime_disable(tas_dev->dev); + + return 0; +} + +static const struct sdw_device_id tasdevice_sdw_id[] = { + SDW_SLAVE_ENTRY(0x0102, 0x0000, 0), + {} +}; +MODULE_DEVICE_TABLE(sdw, tasdevice_sdw_id); + +static int __maybe_unused tas2783_sdca_dev_suspend(struct device *dev) +{ + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev); + + if (!tas_priv->hw_init) + return 0; + + regcache_cache_only(tas_priv->regmap, true); + + return 0; +} + +#define TAS2783_PROBE_TIMEOUT_MS 5000 + +static int __maybe_unused tas2783_sdca_dev_resume(struct device *dev) +{ + struct sdw_slave *slave = dev_to_sdw_dev(dev); + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev); + unsigned long time; + + if (!tas_priv->first_hw_init) + return 0; + + if (!slave->unattach_request) + goto regmap_sync; + + time = wait_for_completion_timeout(&slave->initialization_complete, + msecs_to_jiffies(TAS2783_PROBE_TIMEOUT_MS)); + if (!time) { + dev_err(&slave->dev, "Init not complete, timed out\n"); + sdw_show_ping_status(slave->bus, true); + + return -ETIMEDOUT; + } + +regmap_sync: + slave->unattach_request = 0; + regcache_cache_only(tas_priv->regmap, false); + regcache_sync(tas_priv->regmap); + + return 0; +} + +static const struct dev_pm_ops tas2783_sdca_pm = { + SYSTEM_SLEEP_PM_OPS(tas2783_sdca_dev_suspend, + tas2783_sdca_dev_resume) + RUNTIME_PM_OPS(tas2783_sdca_dev_suspend, + tas2783_sdca_dev_resume, NULL) +}; + +static struct sdw_driver tasdevice_sdw_driver = { + .driver = { + .name = "slave-tas2783", + .pm = &tas2783_sdca_pm, + }, + .probe = tasdevice_sdw_probe, + .remove = tasdevice_sdw_remove, + .ops = &tasdevice_sdw_ops, + .id_table = tasdevice_sdw_id, +}; + +module_sdw_driver(tasdevice_sdw_driver); + +MODULE_AUTHOR("Baojun Xu <baojun.xu(a)ti.com>"); +MODULE_AUTHOR("Shenghao Ding <shenghao-ding(a)ti.com>"); +MODULE_DESCRIPTION("ASoC TAS2783 SoundWire Driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/tas2783.h b/sound/soc/codecs/tas2783.h new file mode 100644 index 000000000000..1b91eae47f29 --- /dev/null +++ b/sound/soc/codecs/tas2783.h @@ -0,0 +1,106 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * ALSA SoC Texas Instruments TAS2783 Audio Smart Amplifier + * + * Copyright (C) 2023 - 2024 Texas Instruments Incorporated + * https://www.ti.com + * + * Author: Baojun Xu <baojun.xu(a)ti.com> + * Shenghao Ding <shenghao-ding(a)ti.com> + */ + +#ifndef __TAS2783_H__ +#define __TAS2783_H__ + +/* Unique id start */ +#define TAS2783_UNIQUE_ID_BASE 0x08 +#define TAS2783_MAX_DEV_NUM 8 + +#define TAS2783_DEVICE_RATES (SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000 | \ + SNDRV_PCM_RATE_96000 | \ + SNDRV_PCM_RATE_88200) + +#define TAS2783_DEVICE_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +/* BOOK, PAGE Control Register */ +#define TASDEVICE_REG(book, page, reg) ((book * 256 * 256) + 0x8000 + \ + (page * 128) + reg) + +/*Software Reset */ +#define TAS2873_REG_SWRESET TASDEVICE_REG(0x0, 0x00, 0x01) +#define TAS2873_REG_SWRESET_MASK BIT(0) +#define TAS2873_REG_SWRESET_RESET BIT(0) + +#define TAS2873_REG_PWR_CTRL TASDEVICE_REG(0x0, 0x00, 0x02) +#define TAS2783_REG_AEF_MASK GENMASK(4, 3) +#define TAS2783_REG_AEF_ACTIVE 0 +#define TAS2783_REG_AEF_INACTIVE GENMASK(4, 3) +#define TAS2783_REG_PWR_MODE_MASK GENMASK(2, 0) +#define TAS2783_REG_PWR_MODE_ACTIVE 0 +#define TAS2783_REG_PWR_MODE_SW_PWD BIT(1) + +#define TAS2783_REG_TDM_RX_CFG TASDEVICE_REG(0x0, 0x00, 0x0a) + +/* Volume control */ +#define TAS2783_DVC_LVL TASDEVICE_REG(0x0, 0x00, 0x1a) +#define TAS2783_AMP_LEVEL TASDEVICE_REG(0x0, 0x00, 0x03) +#define TAS2783_AMP_LEVEL_MASK GENMASK(5, 1) + +/* Calibration data */ +#define TAS2783_CALIBRATION_RE TASDEVICE_REG(0x0, 0x17, 0x74) +#define TAS2783_CALIBRATION_RE_LOW TASDEVICE_REG(0x0, 0x18, 0x14) +#define TAS2783_CALIBRATION_INV_RE TASDEVICE_REG(0x0, 0x18, 0x0c) +#define TAS2783_CALIBRATION_POW TASDEVICE_REG(0x0, 0x13, 0x70) +#define TAS2783_CALIBRATION_TLIMIT TASDEVICE_REG(0x0, 0x18, 0x7c) + +/* TAS2783 SDCA Control - function number */ +#define TAS2783_FUNC_TYPE_SMART_AMP 0x01 + +/* TAS2783 SDCA entity */ +#define TAS2783_SDCA_ENT_FU21 0x01 +#define TAS2783_SDCA_ENT_FU23 0x02 + +/* TAS2783 SDCA control */ +#define TAS2783_SDCA_CTL_REQ_POWER_STATE 0x01 +#define TAS2783_SDCA_CTL_FU_MUTE 0x01 +#define TAS2783_SDCA_CTL_FU_VOLUME 0x02 +#define TAS2783_SDCA_CTL_UDMPU_CLUSTER 0x10 + +#define TAS2783_DEVICE_CHANNEL_LEFT 1 +#define TAS2783_DEVICE_CHANNEL_RIGHT 2 +#define TAS2783_DSPFW_FILENAME_LEN 64 + +#define TAS2783_MAX_CALIDATA_SIZE 256 + +#define TAS2783_CALIDATAV1_TIMESTAMP_INDX 40 +#define TAS2783_CALIDATAV1_CRC32_INDX 41 +/* 8 devs * 20 bytes calibrated data/dev + 4 bytes Timestamp */ +#define TAS2783_CALIDATAV1_BYTE_SIZE (8 * 20 + 4) + +#define TAS2783_CALIDATAV2_TIMESTAMP_INDX 2 + +struct tas2783_firmware_node { + unsigned int vendor_id; + unsigned int file_id; + unsigned int version_id; + unsigned int length; + unsigned int download_addr; +}; + +struct calibration_data { + unsigned long total_sz; + unsigned char data[TAS2783_MAX_CALIDATA_SIZE]; +}; + +struct tasdevice_priv { + struct sdw_slave *sdw_peripheral; + struct regmap *regmap; + struct device *dev; + bool hw_init; + bool first_hw_init; +}; + +#endif /*__TAS2783_H__ */ -- 2.34.1

3 2

[PATCH] ALSA: aaci: report FIFO size in frames
by Oswald Buddenhagen 02 Apr '24

02 Apr '24

We already have frames, so don't convert them to bytes - the mid-layer would convert them to frames again anyway. Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen(a)gmx.de> --- Is this actually right? What about stereo? cf. 5d350cba486de34eff99d0394d8fb436af54522e Cc: Russell King <rmk(a)arm.linux.org.uk> --- sound/arm/aaci.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index c3340b8ff3da..3655e88f3fca 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -350,6 +350,7 @@ static const struct snd_pcm_hardware aaci_hw_info = { SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_FIFO_IN_FRAMES | SNDRV_PCM_INFO_RESUME, /* @@ -430,12 +431,7 @@ static int aaci_pcm_open(struct snd_pcm_substream *substream) snd_ac97_pcm_double_rate_rules(runtime); } - /* - * ALSA wants the byte-size of the FIFOs. As we only support - * 16-bit samples, this is twice the FIFO depth irrespective - * of whether it's in compact mode or not. - */ - runtime->hw.fifo_size = aaci->fifo_depth * 2; + runtime->hw.fifo_size = aaci->fifo_depth; mutex_lock(&aaci->irq_lock); if (!aaci->users++) { -- 2.42.0.419.g70bf8a5751

2 11

[PATCH] ALSA: hda/realtek: cs35l41: Support ASUS ROG G634JYR
by Luke D. Jones 02 Apr '24

02 Apr '24

Fixes the realtek quirk to initialise the Cirrus amp correctly and adds related quirk for missing DSD properties. This model laptop has slightly updated internals compared to the previous version with Realtek Codec ID of 0x1caf. Signed-off-by: Luke D. Jones <luke(a)ljones.dev> --- sound/pci/hda/cs35l41_hda_property.c | 2 ++ sound/pci/hda/patch_realtek.c | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/cs35l41_hda_property.c b/sound/pci/hda/cs35l41_hda_property.c index 72ec872afb8d..25c117db3317 100644 --- a/sound/pci/hda/cs35l41_hda_property.c +++ b/sound/pci/hda/cs35l41_hda_property.c @@ -108,6 +108,7 @@ static const struct cs35l41_config cs35l41_config_table[] = { { "10431F12", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 }, { "10431F1F", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, -1, 0, 0, 0, 0 }, { "10431F62", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 }, + { "10433A60", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 }, { "17AA386F", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, -1, -1, 0, 0, 0 }, { "17AA38A9", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 2, -1, 0, 0, 0 }, { "17AA38AB", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 2, -1, 0, 0, 0 }, @@ -496,6 +497,7 @@ static const struct cs35l41_prop_model cs35l41_prop_model_table[] = { { "CSC3551", "10431F12", generic_dsd_config }, { "CSC3551", "10431F1F", generic_dsd_config }, { "CSC3551", "10431F62", generic_dsd_config }, + { "CSC3551", "10433A60", generic_dsd_config }, { "CSC3551", "17AA386F", generic_dsd_config }, { "CSC3551", "17AA38A9", generic_dsd_config }, { "CSC3551", "17AA38AB", generic_dsd_config }, diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index a17c36a36aa5..8da2827bb3c3 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10133,7 +10133,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x3a30, "ASUS G814JVR/JIR", ALC245_FIXUP_CS35L41_SPI_2), SND_PCI_QUIRK(0x1043, 0x3a40, "ASUS G814JZR", ALC245_FIXUP_CS35L41_SPI_2), SND_PCI_QUIRK(0x1043, 0x3a50, "ASUS G834JYR/JZR", ALC245_FIXUP_CS35L41_SPI_2), - SND_PCI_QUIRK(0x1043, 0x3a60, "ASUS G634JYR/JZR", ALC245_FIXUP_CS35L41_SPI_2), + SND_PCI_QUIRK(0x1043, 0x3a60, "ASUS G634JYR/JZR", ALC285_FIXUP_ASUS_SPI_REAR_SPEAKERS), SND_PCI_QUIRK(0x1043, 0x831a, "ASUS P901", ALC269_FIXUP_STEREO_DMIC), SND_PCI_QUIRK(0x1043, 0x834a, "ASUS S101", ALC269_FIXUP_STEREO_DMIC), SND_PCI_QUIRK(0x1043, 0x8398, "ASUS P1005", ALC269_FIXUP_STEREO_DMIC), -- 2.44.0

2 1

Re: [PATCH] Add support for 2024 ROG Strix G634JZR
by Takashi Iwai 02 Apr '24

02 Apr '24

On Tue, 02 Apr 2024 08:04:39 +0200, Takashi Iwai wrote: > > On Mon, 01 Apr 2024 16:31:30 +0200, > Daniel Berlin via B4 Relay wrote: > > > > From: Daniel Berlin <dberlin(a)dberlin.org> > > > > The windows driver inf says it uses the exact same tunings and setup as the > > older G634, and then reuses the data for ID 1043:1CAF. > > > > We do the same here. > > Tested on an actual laptop, sound works fine with this patch plus > > default fallback firmware. > > > > Signed-off-by: Daniel Berlin <dberlin(a)dberlin.org> > > Applied now. Thanks. ... and now I see that Luke has another patch that modified the entry in patch_realtek.c, and I took his version instead. https://lore.kernel.org/r/20240402015126.21115-1-luke@ljones.dev Let me know if this causes problem for you. thanks, Takashi

1 0

[PATCH] ALSA: hda/realtek: Update Panasonic CF-SZ6 quirk to support headset with microphone
by I Gede Agastya Darma Laksana 02 Apr '24

02 Apr '24

This patch addresses an issue with the Panasonic CF-SZ6's existing quirk, specifically its headset microphone functionality. Previously, the quirk used ALC269_FIXUP_HEADSET_MODE, which does not support the CF-SZ6's design of a single 3.5mm jack for both mic and audio output effectively. The device uses pin 0x19 for the headset mic without jack detection. Following verification on the CF-SZ6 and discussions with the original patch author, i determined that the update to ALC269_FIXUP_ASPIRE_HEADSET_MIC is the appropriate solution. This change is custom-designed for the CF-SZ6's unique hardware setup, which includes a single 3.5mm jack for both mic and audio output, connecting the headset microphone to pin 0x19 without the use of jack detection. Signed-off-by: I Gede Agastya Darma Laksana <gedeagas22(a)gmail.com> --- sound/pci/hda/patch_realtek.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index a17c36a36..9dedb6504 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10159,7 +10159,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x10ec, 0x1254, "Intel Reference board", ALC295_FIXUP_CHROME_BOOK), SND_PCI_QUIRK(0x10ec, 0x12cc, "Intel Reference board", ALC295_FIXUP_CHROME_BOOK), SND_PCI_QUIRK(0x10ec, 0x12f6, "Intel Reference board", ALC295_FIXUP_CHROME_BOOK), - SND_PCI_QUIRK(0x10f7, 0x8338, "Panasonic CF-SZ6", ALC269_FIXUP_HEADSET_MODE), + SND_PCI_QUIRK(0x10f7, 0x8338, "Panasonic CF-SZ6", ALC269_FIXUP_ASPIRE_HEADSET_MIC), SND_PCI_QUIRK(0x144d, 0xc109, "Samsung Ativ book 9 (NP900X3G)", ALC269_FIXUP_INV_DMIC), SND_PCI_QUIRK(0x144d, 0xc169, "Samsung Notebook 9 Pen (NP930SBE-K01US)", ALC298_FIXUP_SAMSUNG_AMP), SND_PCI_QUIRK(0x144d, 0xc176, "Samsung Notebook 9 Pro (NP930MBE-K04US)", ALC298_FIXUP_SAMSUNG_AMP), -- 2.34.1

1 0