February 2024 - Alsa-devel - mailman.alsa-project.org

[PATCH] ASoC: Intel: avs: Expose FW version with sysfs
by Amadeusz Sławiński 07 Feb '24

07 Feb '24

From: Cezary Rojewski <cezary.rojewski(a)intel.com> Add functionality to read version of loaded FW from sysfs. Signed-off-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> --- .../ABI/testing/sysfs-bus-pci-devices-avs | 8 +++++ sound/soc/intel/avs/Makefile | 3 +- sound/soc/intel/avs/avs.h | 4 +++ sound/soc/intel/avs/core.c | 1 + sound/soc/intel/avs/sysfs.c | 35 +++++++++++++++++++ 5 files changed, 50 insertions(+), 1 deletion(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-pci-devices-avs create mode 100644 sound/soc/intel/avs/sysfs.c diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-avs b/Documentation/ABI/testing/sysfs-bus-pci-devices-avs new file mode 100644 index 0000000000000..abfdecd85f204 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-avs @@ -0,0 +1,8 @@ +What: /sys/devices/pci0000:00/<dev>/fw_version +Date: February 2024 +Contact: Cezary Rojewski <cezary.rojewski(a)intel.com> +Description: + Version of AudioDSP firmware ASoC avs driver is communicating + with. + + Format: %d.%d.%d.%d, type:major:minor:build. diff --git a/sound/soc/intel/avs/Makefile b/sound/soc/intel/avs/Makefile index 460ee6599daf0..a3fad926d0fb0 100644 --- a/sound/soc/intel/avs/Makefile +++ b/sound/soc/intel/avs/Makefile @@ -1,7 +1,8 @@ # SPDX-License-Identifier: GPL-2.0-only snd-soc-avs-objs := dsp.o ipc.o messages.o utils.o core.o loader.o \ - topology.o path.o pcm.o board_selection.o control.o + topology.o path.o pcm.o board_selection.o control.o \ + sysfs.o snd-soc-avs-objs += cldma.o snd-soc-avs-objs += skl.o apl.o diff --git a/sound/soc/intel/avs/avs.h b/sound/soc/intel/avs/avs.h index d694e08e44e18..69c912feb8a7e 100644 --- a/sound/soc/intel/avs/avs.h +++ b/sound/soc/intel/avs/avs.h @@ -392,4 +392,8 @@ static inline void avs_debugfs_init(struct avs_dev *adev) { } static inline void avs_debugfs_exit(struct avs_dev *adev) { } #endif +/* Filesystems integration */ + +extern const struct attribute_group *avs_attr_groups[]; + #endif /* __SOUND_SOC_INTEL_AVS_H */ diff --git a/sound/soc/intel/avs/core.c b/sound/soc/intel/avs/core.c index db78eb2f01080..273a902168562 100644 --- a/sound/soc/intel/avs/core.c +++ b/sound/soc/intel/avs/core.c @@ -776,6 +776,7 @@ static struct pci_driver avs_pci_driver = { .probe = avs_pci_probe, .remove = avs_pci_remove, .shutdown = avs_pci_shutdown, + .dev_groups = avs_attr_groups, .driver = { .pm = &avs_dev_pm, }, diff --git a/sound/soc/intel/avs/sysfs.c b/sound/soc/intel/avs/sysfs.c new file mode 100644 index 0000000000000..cce21636fbc02 --- /dev/null +++ b/sound/soc/intel/avs/sysfs.c @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0-only +// +// Copyright(c) 2021-2024 Intel Corporation. All rights reserved. +// +// Authors: Cezary Rojewski <cezary.rojewski(a)intel.com> +// Amadeusz Slawinski <amadeuszx.slawinski(a)linux.intel.com> +// + +#include <linux/sysfs.h> +#include "avs.h" + +static ssize_t fw_version_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct avs_dev *adev = to_avs_dev(dev); + struct avs_fw_version *fw_version = &adev->fw_cfg.fw_version; + + return sysfs_emit(buf, "%d.%d.%d.%d\n", fw_version->major, fw_version->minor, + fw_version->hotfix, fw_version->build); +} +static DEVICE_ATTR_RO(fw_version); + +static struct attribute *avs_fw_attrs[] = { + &dev_attr_fw_version.attr, + NULL +}; + +static const struct attribute_group avs_attr_group = { + .name = "avs", + .attrs = avs_fw_attrs, +}; + +const struct attribute_group *avs_attr_groups[] = { + &avs_attr_group, + NULL +}; -- 2.34.1

2 1

[PATCH] ASoC: dt-bindings: atmel,asoc-wm8904: Convert to json-schema
by Dharma Balasubiramani 07 Feb '24

07 Feb '24

Convert atmel,asoc-wm8904 devicetree binding to json-schema. Signed-off-by: Dharma Balasubiramani <dharma.b(a)microchip.com> --- .../bindings/sound/atmel,asoc-wm8904.yaml | 84 +++++++++++++++++++ .../bindings/sound/atmel-wm8904.txt | 55 ------------ 2 files changed, 84 insertions(+), 55 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/atmel,asoc-wm8904.yaml delete mode 100644 Documentation/devicetree/bindings/sound/atmel-wm8904.txt diff --git a/Documentation/devicetree/bindings/sound/atmel,asoc-wm8904.yaml b/Documentation/devicetree/bindings/sound/atmel,asoc-wm8904.yaml new file mode 100644 index 000000000000..89a67f8e33b6 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/atmel,asoc-wm8904.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/atmel,asoc-wm8904.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel wm8904 audio codec complex + +maintainers: + - Dharma Balasubiramani <dharma.b(a)microchip.com> + +description: + The ASoC audio complex configuration for Atmel with WM8904 audio codec. + +properties: + compatible: + const: atmel,asoc-wm8904 + + atmel,model: + $ref: /schemas/types.yaml#/definitions/string + description: The user-visible name of this sound complex. + + atmel,ssc-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the SSC controller. + + atmel,audio-codec: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the WM8731 audio codec. + + atmel,audio-routing: + description: + A list of the connections between audio components. Each entry is a pair + of strings, the first being the connection's sink, the second being the + connection's source. + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + items: + enum: + # Board Connectors + - Headphone Jack + - Line In Jack + - Mic + # WM8904 CODEC Pins + - IN1L + - IN1R + - IN2L + - IN2R + - IN3L + - IN3R + - HPOUTL + - HPOUTR + - LINEOUTL + - LINEOUTR + - MICBIAS + +required: + - compatible + - atmel,model + - atmel,audio-routing + - atmel,ssc-controller + - atmel,audio-codec + +additionalProperties: false + +examples: + - | + sound { + compatible = "atmel,asoc-wm8904"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck0_as_mck>; + + atmel,model = "wm8904 @ AT91SAM9N12EK"; + + atmel,audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN2L", "Line In Jack", + "IN2R", "Line In Jack", + "Mic", "MICBIAS", + "IN1L", "Mic"; + + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8904>; + }; diff --git a/Documentation/devicetree/bindings/sound/atmel-wm8904.txt b/Documentation/devicetree/bindings/sound/atmel-wm8904.txt deleted file mode 100644 index 8bbe50c884b6..000000000000 --- a/Documentation/devicetree/bindings/sound/atmel-wm8904.txt +++ /dev/null @@ -1,55 +0,0 @@ -Atmel ASoC driver with wm8904 audio codec complex - -Required properties: - - compatible: "atmel,asoc-wm8904" - - atmel,model: The user-visible name of this sound complex. - - atmel,audio-routing: A list of the connections between audio components. - Each entry is a pair of strings, the first being the connection's sink, - the second being the connection's source. Valid names for sources and - sinks are the WM8904's pins, and the jacks on the board: - - WM8904 pins: - - * IN1L - * IN1R - * IN2L - * IN2R - * IN3L - * IN3R - * HPOUTL - * HPOUTR - * LINEOUTL - * LINEOUTR - * MICBIAS - - Board connectors: - - * Headphone Jack - * Line In Jack - * Mic - - - atmel,ssc-controller: The phandle of the SSC controller - - atmel,audio-codec: The phandle of the WM8904 audio codec - -Optional properties: - - pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt - -Example: -sound { - compatible = "atmel,asoc-wm8904"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pck0_as_mck>; - - atmel,model = "wm8904 @ AT91SAM9N12EK"; - - atmel,audio-routing = - "Headphone Jack", "HPOUTL", - "Headphone Jack", "HPOUTR", - "IN2L", "Line In Jack", - "IN2R", "Line In Jack", - "Mic", "MICBIAS", - "IN1L", "Mic"; - - atmel,ssc-controller = <&ssc0>; - atmel,audio-codec = <&wm8904>; -}; -- 2.25.1

1 0

[PATCH v7] ASoc: tas2783: Add tas2783 codec driver
by Shenghao Ding 07 Feb '24

07 Feb '24

The tas2783 is a smart audio amplifier with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, and I2S/TDM interfaces designed for portable applications. An on-chip DSP supports Texas Instruments SmartAmp speaker protection algorithm. The integrated speaker voltage and current sense provides for real-time monitoring of lodspeakers. The ASoC component provides the majority of the functionality of the device, all the audio functions. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- Change in v7: - simplify tasdevice_set_sdw_stream - fixed some Linux coding style - fixed the spelling mistakes - Select left/right channel based on unique id - a longer description has been added - remove unused crc8 in KCONFIG - Invert of RE here means reciprocal of RE - correct indentation - correct the wrong pow calibrated register - correct comment on RESET register - fixed usually lines don't end with an open parenthesis - fixed tasdevice_sdw_shutdown - use defines for function, entity, etc. for readable - remove unnecessary codec_lock in component_probe() - remove struct sdw_stream_data - remove unused macro definitions - use BIT(2) and BIT(1) instead of 0x2 and 0x1 - implement pm_runtime - reg_start is u8, reg_start + i only adds i byte, it should be reg_start + i * 4, because the calibration values - fixed total_sz in tas2783_calibration - add a define for TASDEVICE_REG(0, 0, 0x0a) - rework macro style in header file - Add select CRC32 - rewrite the mute and the return value handling - Add comments on bin file - Add link_id into the fw name to distinguish the same sdw id on different sdw id. - remove unnecessary mutex_lock - use set_active() in tasdevice_io_init and move all other parts in the probe. - move pm_runtime_get_noresume to the probe - fix the return value of putvol function - add put_noidle in tasdevice_sdw_remove --- sound/soc/codecs/Kconfig | 14 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tas2783-sdw.c | 937 +++++++++++++++++++++++++++++++++ sound/soc/codecs/tas2783.h | 108 ++++ 4 files changed, 1061 insertions(+) create mode 100644 sound/soc/codecs/tas2783-sdw.c create mode 100644 sound/soc/codecs/tas2783.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 59f9742e9ff4..f7b35e614801 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -247,6 +247,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_TAS2781_COMLIB imply SND_SOC_TAS2781_FMWLIB imply SND_SOC_TAS2781_I2C + imply SND_SOC_TAS2783 imply SND_SOC_TAS5086 imply SND_SOC_TAS571X imply SND_SOC_TAS5720 @@ -1847,6 +1848,19 @@ config SND_SOC_TAS2781_I2C algo coefficient setting, for one, two or even multiple TAS2781 chips. +config SND_SOC_TAS2783 + tristate "Texas Instruments TAS2783 speaker amplifier (sdw)" + depends on SOUNDWIRE + depends on EFI + select REGMAP + select REGMAP_SOUNDWIRE + select CRC32_SARWATE + help + Enable support for Texas Instruments TAS2783 Smart Amplifier + Digital input mono Class-D and DSP-inside audio power amplifiers. + TAS2783 supports the MIPI SoundWire v1.2 compatible interface + for audio and control data. + config SND_SOC_TAS5086 tristate "Texas Instruments TAS5086 speaker amplifier" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index f53baa2b9565..6afceb126ae3 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -284,6 +284,7 @@ snd-soc-tas2770-objs := tas2770.o snd-soc-tas2781-comlib-objs := tas2781-comlib.o snd-soc-tas2781-fmwlib-objs := tas2781-fmwlib.o snd-soc-tas2781-i2c-objs := tas2781-i2c.o +snd-soc-tas2783-objs := tas2783-sdw.o snd-soc-tfa9879-objs := tfa9879.o snd-soc-tfa989x-objs := tfa989x.o snd-soc-tlv320adc3xxx-objs := tlv320adc3xxx.o @@ -664,6 +665,7 @@ obj-$(CONFIG_SND_SOC_TAS2780) += snd-soc-tas2780.o obj-$(CONFIG_SND_SOC_TAS2781_COMLIB) += snd-soc-tas2781-comlib.o obj-$(CONFIG_SND_SOC_TAS2781_FMWLIB) += snd-soc-tas2781-fmwlib.o obj-$(CONFIG_SND_SOC_TAS2781_I2C) += snd-soc-tas2781-i2c.o +obj-$(CONFIG_SND_SOC_TAS2783) += snd-soc-tas2783.o obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o obj-$(CONFIG_SND_SOC_TAS571X) += snd-soc-tas571x.o obj-$(CONFIG_SND_SOC_TAS5720) += snd-soc-tas5720.o diff --git a/sound/soc/codecs/tas2783-sdw.c b/sound/soc/codecs/tas2783-sdw.c new file mode 100644 index 000000000000..69e1f5cbfa0f --- /dev/null +++ b/sound/soc/codecs/tas2783-sdw.c @@ -0,0 +1,937 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// ALSA SoC Texas Instruments TAS2783 Audio Smart Amplifier +// +// Copyright (C) 2023 - 2024 Texas Instruments Incorporated +// https://www.ti.com +// +// Author: Baojun Xu <baojun.xu(a)ti.com> +// Kevin Lu <kevin-lu(a)ti.com> +// Shenghao Ding <shenghao-ding(a)ti.com> +// + +#include <linux/crc32.h> +#include <linux/efi.h> +#include <linux/err.h> +#include <linux/firmware.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> +#include <linux/soundwire/sdw.h> +#include <linux/soundwire/sdw_registers.h> +#include <linux/soundwire/sdw_type.h> +#include <sound/pcm_params.h> +#include <sound/sdw.h> +#include <sound/soc.h> +#include <sound/tlv.h> +#include <sound/tas2781-tlv.h> + +#include "tas2783.h" + +static const unsigned int tas2783_cali_reg[] = { + TAS2783_CALIBRATION_RE, /* Resistance */ + TAS2783_CALIBRATION_RE_LOW, /* Low limitation of RE */ + TAS2783_CALIBRATION_INV_RE, /* Reciprocal of RE */ + TAS2783_CALIBRATION_POW, /* RMS Power */ + TAS2783_CALIBRATION_TLIMIT /* Temperature limitation */ +}; + +static const struct reg_default tas2783_reg_defaults[] = { + /* Default values for ROM mode. Activated. */ + { 0x8002, 0x1a }, /* AMP inactive. */ + { 0x8097, 0xc8 }, + { 0x80b5, 0x74 }, + { 0x8099, 0x20 }, + { 0xfe8d, 0x0d }, + { 0xfebe, 0x4a }, + { 0x8230, 0x00 }, + { 0x8231, 0x00 }, + { 0x8232, 0x00 }, + { 0x8233, 0x01 }, + { 0x8418, 0x00 }, /* Set volume to 0 dB. */ + { 0x8419, 0x00 }, + { 0x841a, 0x00 }, + { 0x841b, 0x00 }, + { 0x8428, 0x40 }, /* Unmute channel */ + { 0x8429, 0x00 }, + { 0x842a, 0x00 }, + { 0x842b, 0x00 }, + { 0x8548, 0x00 }, /* Set volume to 0 dB. */ + { 0x8549, 0x00 }, + { 0x854a, 0x00 }, + { 0x854b, 0x00 }, + { 0x8558, 0x40 }, /* Unmute channel */ + { 0x8559, 0x00 }, + { 0x855a, 0x00 }, + { 0x855b, 0x00 }, + { 0x800a, 0x3a }, /* Enable both channel */ + { 0x800e, 0x44 }, + { 0x800f, 0x40 }, + { 0x805c, 0x99 }, + { SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, TAS2783_SDCA_ENT_FU21, + TAS2783_SDCA_CTL_FU_MUTE, 0), 0 }, + { SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, TAS2783_SDCA_ENT_FU21, + TAS2783_SDCA_CTL_FU_VOLUME, 0), 0 }, + { SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, TAS2783_SDCA_ENT_FU23, + TAS2783_SDCA_CTL_FU_MUTE, 0), 0 }, +}; + +static bool tas2783_readable_register(struct device *dev, + unsigned int reg) +{ + switch (reg) { + case 0x8000 ... 0xc000: /* Page 0 ~ 127. */ + case 0xfe80 ... 0xfeff: /* Page 253. */ + return true; + default: + return false; + } +} + +static bool tas2783_volatile_register(struct device *dev, + unsigned int reg) +{ + switch (reg) { + case 0x8001: + /* Only reset register was volatiled. + * Software reset. Bit is self clearing. + * 0b = Don't reset + * 1b = reset + */ + return true; + default: + return false; + } +} + +static const struct regmap_config tasdevice_regmap = { + .reg_bits = 32, + .val_bits = 8, + .readable_reg = tas2783_readable_register, + .volatile_reg = tas2783_volatile_register, + .max_register = 0x44ffffff, + .reg_defaults = tas2783_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(tas2783_reg_defaults), + .cache_type = REGCACHE_RBTREE, + .use_single_read = true, + .use_single_write = true, +}; + +static int tasdevice_clamp(int val, int max, unsigned int invert) +{ + /* Keep in valid area, out of range value don't care. */ + if (val > max) + val = max; + if (invert) + val = max - val; + if (val < 0) + val = 0; + return val; +} + +static int tas2783_digital_getvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(component); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct regmap *map = tas_dev->regmap; + int val = 0, ret; + + if (!ucontrol) { + dev_err(tas_dev->dev, "%s, wrong parameter.\n", __func__); + return -EINVAL; + } + /* Read current volume from the device. */ + ret = regmap_read(map, mc->reg, &val); + if (ret < 0) { + dev_err(tas_dev->dev, "%s, get digital vol error %x.\n", + __func__, ret); + return ret; + } + ucontrol->value.integer.value[0] = + tasdevice_clamp(val, mc->max, mc->invert); + + return ret; +} + +static int tas2783_digital_putvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(component); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct regmap *map = tas_dev->regmap; + int val, ret; + + if (!ucontrol) { + dev_err(tas_dev->dev, "%s, wrong parameter.\n", __func__); + return 0; + } + val = tasdevice_clamp(ucontrol->value.integer.value[0], + mc->max, mc->invert); + + ret = regmap_write(map, mc->reg, val); + if (ret < 0) { + dev_err(tas_dev->dev, "%s, Put vol %d into %x %x.\n", + __func__, val, mc->reg, ret); + return 0; + } + + return 1; +} + +static int tas2783_amp_getvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(component); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct regmap *map = tas_dev->regmap; + unsigned char mask = 0; + int ret, val = 0; + + if (!ucontrol) { + dev_err(tas_dev->dev, "%s, wrong parameter.\n", __func__); + return -EINVAL; + } + /* Read current volume from the device. */ + ret = regmap_read(map, mc->reg, &val); + if (ret < 0) { + dev_err(tas_dev->dev, "%s get AMP vol from %x with %d.\n", + __func__, mc->reg, ret); + return ret; + } + + mask = (1 << fls(mc->max)) - 1; + mask <<= mc->shift; + val = (val & mask) >> mc->shift; + ucontrol->value.integer.value[0] = tasdevice_clamp(val, mc->max, + mc->invert); + + return ret; +} + +static int tas2783_amp_putvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(component); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct regmap *map = tas_dev->regmap; + unsigned char mask; + int val, ret; + + if (!ucontrol) { + dev_err(tas_dev->dev, "%s, wrong parameter.\n", __func__); + return 0; + } + mask = (1 << fls(mc->max)) - 1; + mask <<= mc->shift; + val = tasdevice_clamp(ucontrol->value.integer.value[0], mc->max, + mc->invert); + ret = regmap_update_bits(map, mc->reg, mask, val << mc->shift); + if (ret < 0) { + dev_err(tas_dev->dev, "Write @%#x..%#x:%d\n", + mc->reg, val, ret); + return 0; + } + + return 1; +} + +static const struct snd_kcontrol_new tas2783_snd_controls[] = { + SOC_SINGLE_RANGE_EXT_TLV("Amp Gain Volume", TAS2783_AMP_LEVEL, + 1, 0, 20, 0, tas2783_amp_getvol, + tas2783_amp_putvol, amp_vol_tlv), + SOC_SINGLE_RANGE_EXT_TLV("Digital Volume", TAS2783_DVC_LVL, + 0, 0, 200, 1, tas2783_digital_getvol, + tas2783_digital_putvol, dvc_tlv), +}; + +static void tas2783_apply_calib(struct tasdevice_priv *tas_dev, + unsigned int *cali_data) +{ + struct regmap *map = tas_dev->regmap; + u8 *reg_start; + int ret; + + if (!tas_dev->sdw_peripheral) { + dev_err(tas_dev->dev, "%s, slaver doesn't exist.\n", + __func__); + return; + } + if ((tas_dev->sdw_peripheral->id.unique_id < TAS2783_ID_MIN) || + (tas_dev->sdw_peripheral->id.unique_id > TAS2783_ID_MAX)) { + dev_err(tas_dev->dev, "%s, error unique_id.\n", + __func__); + return; + } + + reg_start = (u8 *)(cali_data + (tas_dev->sdw_peripheral->id.unique_id + - TAS2783_ID_MIN) * sizeof(tas2783_cali_reg)); + for (int i = 0; i < ARRAY_SIZE(tas2783_cali_reg); i++) { + ret = regmap_bulk_write(map, tas2783_cali_reg[i], + &reg_start[4 * i], 4); + if (ret) { + dev_err(tas_dev->dev, "Cali failed %x:%d\n", + tas2783_cali_reg[i], ret); + break; + } + } +} + +/* Load the calibration data, including speaker impedance, f0, etc. + * Calibration is done by the manufacturer in the factory. The calibration + * data are used by the algorithm for calculating the speaker temperature, + * speaker membrane excursion and f0 in real time during playback. + * The DSP will work with default data values if calibrated data are + * missing or are invalid. + */ +static int tas2783_calibration(struct tasdevice_priv *tas_dev) +{ + efi_guid_t efi_guid = EFI_GUID(0x1f52d2a1, 0xbb3a, 0x457d, 0xbc, + 0x09, 0x43, 0xa3, 0xf4, 0x31, 0x0a, 0x92); + static efi_char16_t efi_name[] = L"CALI_DATA"; + struct tm *tm = &tas_dev->tm; + unsigned int attr = 0, crc; + unsigned int *tmp_val; + efi_status_t status; + + tas_dev->cali_data.total_sz = 0; + + status = efi.get_variable(efi_name, &efi_guid, &attr, + &tas_dev->cali_data.total_sz, tas_dev->cali_data.data); + if (status == EFI_BUFFER_TOO_SMALL) { + status = efi.get_variable(efi_name, &efi_guid, &attr, + &tas_dev->cali_data.total_sz, + tas_dev->cali_data.data); + dev_dbg(tas_dev->dev, "cali get %lx bytes result:%ld\n", + tas_dev->cali_data.total_sz, status); + } + if (status != 0) { + /* Failed got calibration data from EFI. */ + dev_dbg(tas_dev->dev, "No calibration data in UEFI."); + return 0; + } + + tmp_val = (unsigned int *)tas_dev->cali_data.data; + + crc = crc32(~0, tas_dev->cali_data.data, 84) ^ ~0; + + if (crc == tmp_val[21]) { + /* Date and time of calibration was done. */ + time64_to_tm(tmp_val[20], 0, tm); + dev_dbg(tas_dev->dev, "%4ld-%2d-%2d, %2d:%2d:%2d\n", + tm->tm_year, tm->tm_mon, tm->tm_mday, + tm->tm_hour, tm->tm_min, tm->tm_sec); + tas2783_apply_calib(tas_dev, tmp_val); + } else { + dev_dbg(tas_dev->dev, "CRC 0x%08x not match 0x%08x\n", + crc, tmp_val[21]); + tas_dev->cali_data.total_sz = 0; + } + + return 0; +} + +static void tasdevice_rca_ready(const struct firmware *fmw, + void *context) +{ + struct tasdevice_priv *tas_dev = + (struct tasdevice_priv *) context; + struct tas2783_firmware_node *p; + struct regmap *map = tas_dev->regmap; + unsigned char *buf = NULL; + int offset = 0, img_sz; + int ret, value_sdw; + + if (!fmw || !fmw->data) { + /* No firmware binary, devices will work in ROM mode. */ + dev_err(tas_dev->dev, + "Failed to read %s, no side-effect on driver\n", + tas_dev->rca_binaryname); + ret = -EINVAL; + goto out; + } + buf = (unsigned char *)fmw->data; + + img_sz = le32_to_cpup((__le32 *)&buf[offset]); + offset += sizeof(img_sz); + if (img_sz != fmw->size) { + dev_err(tas_dev->dev, "Size not matching, %d %u", + (int)fmw->size, img_sz); + ret = -EINVAL; + goto out; + } + + while (offset < img_sz) { + p = (struct tas2783_firmware_node *)(buf + offset); + if (p->length > 1) { + ret = regmap_bulk_write(map, p->download_addr, + buf + offset + sizeof(unsigned int)*5, p->length); + } else + ret = regmap_write(map, p->download_addr, + *(buf + offset + sizeof(unsigned int) * 5)); + + if (ret != 0) { + dev_dbg(tas_dev->dev, "Load FW fail: %d.\n", ret); + goto out; + } + offset += sizeof(unsigned int)*5 + p->length; + } + /* Select left/right channel based on unique id. */ + value_sdw = 0x1a; + value_sdw |= ((tas_dev->sdw_peripheral->dev_num & 1) << 4); + dev_dbg(tas_dev->dev, "%s dev_num = %u", __func__, + tas_dev->sdw_peripheral->dev_num); + regmap_write(map, TAS2783_REG_TDM_RX_CFG, value_sdw); + + tas2783_calibration(tas_dev); + +out: + if (fmw) + release_firmware(fmw); +} + +static const struct snd_soc_dapm_widget tasdevice_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("ASI", "ASI Playback", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT("ASI OUT", "ASI Capture", 0, SND_SOC_NOPM, + 0, 0), + SND_SOC_DAPM_OUTPUT("OUT"), + SND_SOC_DAPM_INPUT("DMIC") +}; + +static const struct snd_soc_dapm_route tasdevice_audio_map[] = { + {"OUT", NULL, "ASI"}, + {"ASI OUT", NULL, "DMIC"} +}; + +static int tasdevice_set_sdw_stream(struct snd_soc_dai *dai, + void *sdw_stream, int direction) +{ + snd_soc_dai_dma_data_set(dai, direction, sdw_stream); + + return 0; +} + +static void tasdevice_sdw_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + snd_soc_dai_set_dma_data(dai, substream, NULL); +} + +static int tasdevice_sdw_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct tasdevice_priv *tas_priv = + snd_soc_component_get_drvdata(component); + struct sdw_stream_config stream_config = {0}; + struct sdw_port_config port_config = {0}; + struct sdw_stream_runtime *sdw_stream; + int ret; + + dev_dbg(dai->dev, "%s %s", __func__, dai->name); + sdw_stream = snd_soc_dai_get_dma_data(dai, substream); + + if (!sdw_stream) + return -EINVAL; + + if (!tas_priv->sdw_peripheral) + return -EINVAL; + + /* SoundWire specific configuration */ + snd_sdw_params_to_config(substream, params, + &stream_config, &port_config); + + /* port 1 for playback */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + port_config.num = 1; + else + port_config.num = 2; + + ret = sdw_stream_add_slave(tas_priv->sdw_peripheral, + &stream_config, &port_config, 1, sdw_stream); + if (ret) { + dev_err(dai->dev, "Unable to configure port\n"); + return ret; + } + + dev_dbg(dai->dev, "%s format: %i rate: %i\n", __func__, + params_format(params), params_rate(params)); + + return 0; +} + +static int tasdevice_sdw_pcm_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct tasdevice_priv *tas_priv = + snd_soc_component_get_drvdata(component); + struct sdw_stream_runtime *sdw_stream = + snd_soc_dai_get_dma_data(dai, substream); + + if (!tas_priv->sdw_peripheral) + return -EINVAL; + + sdw_stream_remove_slave(tas_priv->sdw_peripheral, sdw_stream); + + return 0; +} + +static int tasdevice_mute(struct snd_soc_dai *dai, int mute, + int direction) +{ + struct snd_soc_component *component = dai->component; + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(component); + struct regmap *map = tas_dev->regmap; + int ret; + + dev_dbg(tas_dev->dev, "Mute or unmute %d.\n", mute); + + if (mute) { + if (direction == SNDRV_PCM_STREAM_CAPTURE) { + ret = regmap_update_bits(map, + TAS2873_REG_PWR_CTRL, + TAS2783_REG_AEF_MASK, + TAS2783_REG_AEF_INACTIVE); + if (ret) + dev_err(tas_dev->dev, "Disable AEF failed.\n"); + } else { + /* FU23 mute (0x40400108) */ + ret = regmap_write(map, + SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, + TAS2783_SDCA_ENT_FU23, + TAS2783_SDCA_CTL_FU_MUTE, 0), 1); + if (ret) { + dev_err(tas_dev->dev, "FU23 mute failed.\n"); + goto out; + } + /* Both playback and echo data will be shutdown in + * playback stream. + */ + ret = regmap_update_bits(map, TAS2873_REG_PWR_CTRL, + TAS2783_REG_PWR_MODE_MASK | + TAS2783_REG_AEF_MASK, + TAS2783_REG_PWR_MODE_ACTIVE | + TAS2783_REG_PWR_MODE_SW_PWD); + if (ret) { + dev_err(tas_dev->dev, + "PWR&AEF shutdown failed.\n"); + goto out; + } + tas_dev->pstream = false; + } + } else { + /* FU23 Unmute, 0x40400108. */ + if (direction == SNDRV_PCM_STREAM_PLAYBACK) { + ret = regmap_write(map, + SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, + TAS2783_SDCA_ENT_FU23, + TAS2783_SDCA_CTL_FU_MUTE, 0), 0); + if (ret) { + dev_err(tas_dev->dev, "FU23 Unmute failed.\n"); + goto out; + } + ret = regmap_update_bits(map, TAS2873_REG_PWR_CTRL, + TAS2783_REG_PWR_MODE_MASK, + TAS2783_REG_PWR_MODE_ACTIVE); + if (ret) { + dev_err(tas_dev->dev, "PWR Unmute failed.\n"); + goto out; + } + tas_dev->pstream = true; + } else { + /* Capture stream is the echo ref data for voice. + * Without playback, it can't be active. + */ + if (tas_dev->pstream == true) { + ret = regmap_update_bits(map, + TAS2873_REG_PWR_CTRL, + TAS2783_REG_AEF_MASK, + TAS2783_REG_AEF_ACTIVE); + if (ret) { + dev_err(tas_dev->dev, "AEF failed.\n"); + goto out; + } + } else { + dev_err(tas_dev->dev, + "No playback, no AEF!"); + ret = -EINVAL; + } + } + } +out: + if (ret) + dev_err(tas_dev->dev, "Mute or unmute %d failed %d.\n", + mute, ret); + + return ret; +} + +static const struct snd_soc_dai_ops tasdevice_dai_ops = { + .mute_stream = tasdevice_mute, + .hw_params = tasdevice_sdw_hw_params, + .hw_free = tasdevice_sdw_pcm_hw_free, + .set_stream = tasdevice_set_sdw_stream, + .shutdown = tasdevice_sdw_shutdown, +}; + +static struct snd_soc_dai_driver tasdevice_dai_driver[] = { + { + .name = "tas2783-codec", + .id = 0, + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 4, + .rates = TAS2783_DEVICE_RATES, + .formats = TAS2783_DEVICE_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 4, + .rates = TAS2783_DEVICE_RATES, + .formats = TAS2783_DEVICE_FORMATS, + }, + .ops = &tasdevice_dai_ops, + .symmetric_rate = 1, + }, +}; + +static int tasdevice_component_probe(struct snd_soc_component *component) +{ + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(component); + + tas_dev->component = component; + + dev_dbg(tas_dev->dev, "%s was called.\n", __func__); + + return 0; +} + +static const struct snd_soc_component_driver + soc_codec_driver_tasdevice = { + .probe = tasdevice_component_probe, + .controls = tas2783_snd_controls, + .num_controls = ARRAY_SIZE(tas2783_snd_controls), + .dapm_widgets = tasdevice_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(tasdevice_dapm_widgets), + .dapm_routes = tasdevice_audio_map, + .num_dapm_routes = ARRAY_SIZE(tasdevice_audio_map), + .idle_bias_on = 1, + .endianness = 1, +}; + +static int tasdevice_init(struct tasdevice_priv *tas_dev) +{ + int ret; + + dev_set_drvdata(tas_dev->dev, tas_dev); + + ret = devm_snd_soc_register_component(tas_dev->dev, + &soc_codec_driver_tasdevice, + tasdevice_dai_driver, ARRAY_SIZE(tasdevice_dai_driver)); + if (ret) { + dev_err(tas_dev->dev, "%s: codec register error:%d.\n", + __func__, ret); + goto out; + } + + /* tas2783-link_id[0,1,...,N]-unique_id[8,9,...,f].bin stores the dsp + * firmware including speaker protection algorithm, audio acoustic + * algorithm, speaker characters and algorithm params, it must be + * copied into firmware folder. Each tas2783 has its own bin file. + */ + scnprintf(tas_dev->rca_binaryname, 64, "tas2783-%d-%x.bin", + tas_dev->sdw_peripheral->bus->link_id, + tas_dev->sdw_peripheral->id.unique_id); + + ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT, + tas_dev->rca_binaryname, tas_dev->dev, GFP_KERNEL, + tas_dev, tasdevice_rca_ready); + if (ret) { + dev_err(tas_dev->dev, + "%s: request_firmware %x open status: %d.\n", + __func__, tas_dev->sdw_peripheral->id.unique_id, ret); + goto out; + } + + /* set autosuspend parameters */ + pm_runtime_set_autosuspend_delay(tas_dev->dev, 3000); + pm_runtime_use_autosuspend(tas_dev->dev); + + /* make sure the device does not suspend immediately */ + pm_runtime_mark_last_busy(tas_dev->dev); + pm_runtime_get_noresume(tas_dev->dev); + pm_runtime_enable(tas_dev->dev); + +out: + return ret; +} + +static int tasdevice_read_prop(struct sdw_slave *slave) +{ + struct sdw_slave_prop *prop = &slave->prop; + int nval; + int i, j; + u32 bit; + unsigned long addr; + struct sdw_dpn_prop *dpn; + + prop->scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY; + prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY; + + prop->paging_support = true; + + /* first we need to allocate memory for set bits in port lists */ + prop->source_ports = BIT(2); /* BITMAP: 00000100 */ + prop->sink_ports = BIT(1); /* BITMAP: 00000010 */ + + nval = hweight32(prop->source_ports); + prop->src_dpn_prop = devm_kcalloc(&slave->dev, nval, + sizeof(*prop->src_dpn_prop), GFP_KERNEL); + if (!prop->src_dpn_prop) + return -ENOMEM; + + i = 0; + dpn = prop->src_dpn_prop; + addr = prop->source_ports; + for_each_set_bit(bit, &addr, 32) { + dpn[i].num = bit; + dpn[i].type = SDW_DPN_FULL; + dpn[i].simple_ch_prep_sm = true; + dpn[i].ch_prep_timeout = 10; + i++; + } + + /* do this again for sink now */ + nval = hweight32(prop->sink_ports); + prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval, + sizeof(*prop->sink_dpn_prop), GFP_KERNEL); + if (!prop->sink_dpn_prop) + return -ENOMEM; + + j = 0; + dpn = prop->sink_dpn_prop; + addr = prop->sink_ports; + for_each_set_bit(bit, &addr, 32) { + dpn[j].num = bit; + dpn[j].type = SDW_DPN_FULL; + dpn[j].simple_ch_prep_sm = true; + dpn[j].ch_prep_timeout = 10; + j++; + } + + /* set the timeout values */ + prop->clk_stop_timeout = 20; + + return 0; +} + +static int tasdevice_io_init(struct device *dev, struct sdw_slave *slave) +{ + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev); + int ret; + + regcache_cache_only(tas_priv->regmap, false); + + if (tas_priv->first_hw_init) + regcache_cache_bypass(tas_priv->regmap, true); + else + /* + * PM runtime is only enabled when a Slave reports as Attached + */ + + /* update count of parent 'active' children */ + pm_runtime_set_active(&slave->dev); + + /* sw reset */ + ret = regmap_write(tas_priv->regmap, TAS2873_REG_SWRESET, + TAS2873_REG_SWRESET_RESET); + if (ret) { + dev_err(tas_priv->dev, "Reset failed.\n"); + goto out; + } + + if (tas_priv->first_hw_init) { + regcache_cache_bypass(tas_priv->regmap, false); + regcache_mark_dirty(tas_priv->regmap); + } + + tas_priv->first_hw_init = true; + tas_priv->hw_init = true; + +out: + return ret; +} + +static int tasdevice_update_status(struct sdw_slave *slave, + enum sdw_slave_status status) +{ + struct tasdevice_priv *tas_priv = dev_get_drvdata(&slave->dev); + + /* Update the status */ + tas_priv->status = status; + + if (status == SDW_SLAVE_UNATTACHED) + tas_priv->hw_init = false; + + /* Perform initialization only if slave status + * is present and hw_init flag is false + */ + if (tas_priv->hw_init || tas_priv->status != SDW_SLAVE_ATTACHED) + return 0; + + /* perform I/O transfers required for Slave initialization */ + return tasdevice_io_init(&slave->dev, slave); +} + +/* + * slave_ops: callbacks for get_clock_stop_mode, clock_stop and + * port_prep are not defined for now + */ +static const struct sdw_slave_ops tasdevice_sdw_ops = { + .read_prop = tasdevice_read_prop, + .update_status = tasdevice_update_status, +}; + +static int tasdevice_sdw_probe(struct sdw_slave *peripheral, + const struct sdw_device_id *id) +{ + struct device *dev = &peripheral->dev; + struct tasdevice_priv *tas_dev; + int ret; + + tas_dev = devm_kzalloc(dev, sizeof(*tas_dev), GFP_KERNEL); + if (!tas_dev) + return -ENOMEM; + + tas_dev->dev = dev; + tas_dev->chip_id = id->driver_data; + tas_dev->sdw_peripheral = peripheral; + /* + * Mark hw_init to false + * HW init will be performed when device reports present + */ + tas_dev->hw_init = false; + tas_dev->first_hw_init = false; + + dev_set_drvdata(dev, tas_dev); + + tas_dev->regmap = devm_regmap_init_sdw(peripheral, + &tasdevice_regmap); + if (IS_ERR(tas_dev->regmap)) { + ret = PTR_ERR(tas_dev->regmap); + dev_err(dev, "Failed %d of devm_regmap_init_sdw.", ret); + } else + ret = tasdevice_init(tas_dev); + + return ret; +} + +static int tasdevice_sdw_remove(struct sdw_slave *peripheral) +{ + struct tasdevice_priv *tas_dev = dev_get_drvdata(&peripheral->dev); + + if (tas_dev->first_hw_init) + pm_runtime_disable(tas_dev->dev); + + pm_runtime_put_noidle(tas_dev->dev); + return 0; +} + +static const struct sdw_device_id tasdevice_sdw_id[] = { + SDW_SLAVE_ENTRY(0x0102, 0x0000, 0), + {}, +}; + +MODULE_DEVICE_TABLE(sdw, tasdevice_sdw_id); + +static int __maybe_unused tas2783_sdca_dev_suspend(struct device *dev) +{ + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev); + + if (!tas_priv->hw_init) + return 0; + + regcache_cache_only(tas_priv->regmap, true); + + return 0; +} + +#define TAS2783_PROBE_TIMEOUT 5000 + +static int __maybe_unused tas2783_sdca_dev_resume(struct device *dev) +{ + struct sdw_slave *slave = dev_to_sdw_dev(dev); + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev); + unsigned long time; + + if (!tas_priv->first_hw_init) + return 0; + + if (!slave->unattach_request) + goto regmap_sync; + + time = wait_for_completion_timeout(&slave->initialization_complete, + msecs_to_jiffies(TAS2783_PROBE_TIMEOUT)); + if (!time) { + dev_err(&slave->dev, "Init not complete, timed out\n"); + sdw_show_ping_status(slave->bus, true); + + return -ETIMEDOUT; + } + +regmap_sync: + slave->unattach_request = 0; + regcache_cache_only(tas_priv->regmap, false); + regcache_sync(tas_priv->regmap); + + return 0; +} + +static const struct dev_pm_ops tas2783_sdca_pm = { + SET_SYSTEM_SLEEP_PM_OPS(tas2783_sdca_dev_suspend, + tas2783_sdca_dev_resume) + SET_RUNTIME_PM_OPS(tas2783_sdca_dev_suspend, + tas2783_sdca_dev_resume, NULL) +}; + +static struct sdw_driver tasdevice_sdw_driver = { + .driver = { + .name = "slave-tas2783", + .pm = &tas2783_sdca_pm, + }, + .probe = tasdevice_sdw_probe, + .remove = tasdevice_sdw_remove, + .ops = &tasdevice_sdw_ops, + .id_table = tasdevice_sdw_id, +}; + +module_sdw_driver(tasdevice_sdw_driver); + +MODULE_AUTHOR("Baojun Xu <baojun.xu(a)ti.com>"); +MODULE_AUTHOR("Shenghao Ding <shenghao-ding(a)ti.com>"); +MODULE_DESCRIPTION("ASoC TAS2783 SoundWire Driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/tas2783.h b/sound/soc/codecs/tas2783.h new file mode 100644 index 000000000000..55b0cb09d65a --- /dev/null +++ b/sound/soc/codecs/tas2783.h @@ -0,0 +1,108 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * ALSA SoC Texas Instruments TAS2783 Audio Smart Amplifier + * + * Copyright (C) 2023 - 2024 Texas Instruments Incorporated + * https://www.ti.com + * + * Author: Baojun Xu <baojun.xu(a)ti.com> + * Shenghao Ding <shenghao-ding(a)ti.com> + */ + +#ifndef __TAS2783_H__ +#define __TAS2783_H__ + +#define TAS2783_DEVICE_RATES (SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000 | \ + SNDRV_PCM_RATE_96000 | \ + SNDRV_PCM_RATE_88200) + +#define TAS2783_DEVICE_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +/* BOOK, PAGE Control Register */ +#define TASDEVICE_REG(book, page, reg) ((book * 256 * 256) + 0x8000 + \ + (page * 128) + reg) + +/*Software Reset */ +#define TAS2873_REG_SWRESET TASDEVICE_REG(0x0, 0x00, 0x01) +#define TAS2873_REG_SWRESET_MASK BIT(0) +#define TAS2873_REG_SWRESET_RESET BIT(0) + +#define TAS2873_REG_PWR_CTRL TASDEVICE_REG(0x0, 0x00, 0x02) +#define TAS2783_REG_AEF_MASK GENMASK(4, 3) +#define TAS2783_REG_AEF_ACTIVE 0 +#define TAS2783_REG_AEF_INACTIVE GENMASK(4, 3) +#define TAS2783_REG_PWR_MODE_MASK GENMASK(2, 0) +#define TAS2783_REG_PWR_MODE_ACTIVE 0 +#define TAS2783_REG_PWR_MODE_SW_PWD BIT(1) + +#define TAS2783_REG_TDM_RX_CFG TASDEVICE_REG(0x0, 0x00, 0x0a) + +/* Volume control */ +#define TAS2783_DVC_LVL TASDEVICE_REG(0x0, 0x00, 0x1a) +#define TAS2783_AMP_LEVEL TASDEVICE_REG(0x0, 0x00, 0x03) +#define TAS2783_AMP_LEVEL_MASK GENMASK(5, 1) + +/* Calibration data */ +#define TAS2783_CALIBRATION_RE TASDEVICE_REG(0x0, 0x17, 0x74) +#define TAS2783_CALIBRATION_RE_LOW TASDEVICE_REG(0x0, 0x18, 0x14) +#define TAS2783_CALIBRATION_INV_RE TASDEVICE_REG(0x0, 0x18, 0x0c) +#define TAS2783_CALIBRATION_POW TASDEVICE_REG(0x0, 0x13, 0x70) +#define TAS2783_CALIBRATION_TLIMIT TASDEVICE_REG(0x0, 0x18, 0x7c) + +/* Unique id start */ +#define TAS2783_ID_MIN 0x08 +/* Unique id end */ +#define TAS2783_ID_MAX 0x0f + +/* TAS2783 SDCA Control - function number */ +#define TAS2783_FUNC_TYPE_SMART_AMP 0x01 + +/* TAS2783 SDCA entity */ +#define TAS2783_SDCA_ENT_FU21 0x01 +#define TAS2783_SDCA_ENT_FU23 0x02 + +/* TAS2783 SDCA control */ +#define TAS2783_SDCA_CTL_REQ_POWER_STATE 0x01 +#define TAS2783_SDCA_CTL_FU_MUTE 0x01 +#define TAS2783_SDCA_CTL_FU_VOLUME 0x02 +#define TAS2783_SDCA_CTL_UDMPU_CLUSTER 0x10 + +#define TAS2783_DEVICE_CHANNEL_LEFT 1 +#define TAS2783_DEVICE_CHANNEL_RIGHT 2 + +#define TAS2783_MAX_CALIDATA_SIZE 252 + +struct tas2783_firmware_node { + unsigned int vendor_id; + unsigned int file_id; + unsigned int version_id; + unsigned int length; + unsigned int download_addr; +}; + +struct calibration_data { + unsigned long total_sz; + unsigned char data[TAS2783_MAX_CALIDATA_SIZE]; +}; + +struct tasdevice_priv { + struct snd_soc_component *component; + struct calibration_data cali_data; + struct sdw_slave *sdw_peripheral; + enum sdw_slave_status status; + struct sdw_bus_params params; + struct regmap *regmap; + struct device *dev; + struct tm tm; + unsigned char rca_binaryname[64]; + unsigned char dev_name[32]; + unsigned int chip_id; + bool pstream; + bool hw_init; + bool first_hw_init; +}; + +#endif /*__TAS2783_H__ */ -- 2.34.1

4 4

[PATCH] ASoC: cs35l56: Fix deadlock in ASP1 mixer register initialization
by Richard Fitzgerald 07 Feb '24

07 Feb '24

Rewrite the handling of ASP1 TX mixer mux initialization to prevent a deadlock during component_remove(). The firmware can overwrite the ASP1 TX mixer registers with system-specific settings. This is mainly for hardware that uses the ASP as a chip-to-chip link controlled by the firmware. Because of this the driver cannot know the starting state of the ASP1 mixer muxes until the firmware has been downloaded and rebooted. The original workaround for this was to queue a work function from the dsp_work() job. This work then read the register values (populating the regmap cache the first time around) and then called snd_soc_dapm_mux_update_power(). The problem with this is that it was ultimately triggered by cs35l56_component_probe() queueing dsp_work, which meant that it would be running in parallel with the rest of the ASoC component and card initialization. To prevent accessing DAPM before it was fully initialized the work function took the card mutex. But this would deadlock if cs35l56_component_remove() was called before the work job had completed, because ASoC calls component_remove() with the card mutex held. This new version removes the work function. Instead the regmap cache and DAPM mux widgets are initialized the first time any of the associated ALSA controls is read or written. Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> Fixes: 07f7d6e7a124 ("ASoC: cs35l56: Fix for initializing ASP1 mixer registers") --- sound/soc/codecs/cs35l56.c | 158 ++++++++++++++++++------------------- sound/soc/codecs/cs35l56.h | 2 +- 2 files changed, 76 insertions(+), 84 deletions(-) diff --git a/sound/soc/codecs/cs35l56.c b/sound/soc/codecs/cs35l56.c index ebed5ab1245b..7ec70cca1ac4 100644 --- a/sound/soc/codecs/cs35l56.c +++ b/sound/soc/codecs/cs35l56.c @@ -68,6 +68,63 @@ static const char * const cs35l56_asp1_mux_control_names[] = { "ASP1 TX1 Source", "ASP1 TX2 Source", "ASP1 TX3 Source", "ASP1 TX4 Source" }; +static int cs35l56_sync_asp1_mixer_widgets_with_firmware(struct cs35l56_private *cs35l56) +{ + struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(cs35l56->component); + const char *prefix = cs35l56->component->name_prefix; + char full_name[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; + const char *name; + struct snd_kcontrol *kcontrol; + struct soc_enum *e; + unsigned int val[4]; + int i, item, ret; + + /* + * Resume so we can read the registers from silicon if the regmap + * cache has not yet been populated. + */ + ret = pm_runtime_resume_and_get(cs35l56->base.dev); + if (ret < 0) + return ret; + + /* Wait for firmware download and reboot */ + cs35l56_wait_dsp_ready(cs35l56); + + ret = regmap_bulk_read(cs35l56->base.regmap, CS35L56_ASP1TX1_INPUT, + val, ARRAY_SIZE(val)); + + pm_runtime_mark_last_busy(cs35l56->base.dev); + pm_runtime_put_autosuspend(cs35l56->base.dev); + + if (ret) { + dev_err(cs35l56->base.dev, "Failed to read ASP1 mixer regs: %d\n", ret); + return ret; + } + + for (i = 0; i < ARRAY_SIZE(cs35l56_asp1_mux_control_names); ++i) { + name = cs35l56_asp1_mux_control_names[i]; + + if (prefix) { + snprintf(full_name, sizeof(full_name), "%s %s", prefix, name); + name = full_name; + } + + kcontrol = snd_soc_card_get_kcontrol(dapm->card, name); + if (!kcontrol) { + dev_warn(cs35l56->base.dev, "Could not find control %s\n", name); + continue; + } + + e = (struct soc_enum *)kcontrol->private_value; + item = snd_soc_enum_val_to_item(e, val[i] & CS35L56_ASP_TXn_SRC_MASK); + snd_soc_dapm_mux_update_power(dapm, kcontrol, item, e, NULL); + } + + cs35l56->asp1_mixer_widgets_initialized = true; + + return 0; +} + static int cs35l56_dspwait_asp1tx_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { @@ -78,9 +135,11 @@ static int cs35l56_dspwait_asp1tx_get(struct snd_kcontrol *kcontrol, unsigned int addr, val; int ret; - /* Wait for mux to be initialized */ - cs35l56_wait_dsp_ready(cs35l56); - flush_work(&cs35l56->mux_init_work); + if (!cs35l56->asp1_mixer_widgets_initialized) { + ret = cs35l56_sync_asp1_mixer_widgets_with_firmware(cs35l56); + if (ret) + return ret; + } addr = cs35l56_asp1_mixer_regs[index]; ret = regmap_read(cs35l56->base.regmap, addr, &val); @@ -106,9 +165,11 @@ static int cs35l56_dspwait_asp1tx_put(struct snd_kcontrol *kcontrol, bool changed; int ret; - /* Wait for mux to be initialized */ - cs35l56_wait_dsp_ready(cs35l56); - flush_work(&cs35l56->mux_init_work); + if (!cs35l56->asp1_mixer_widgets_initialized) { + ret = cs35l56_sync_asp1_mixer_widgets_with_firmware(cs35l56); + if (ret) + return ret; + } addr = cs35l56_asp1_mixer_regs[index]; val = snd_soc_enum_item_to_val(e, item); @@ -124,70 +185,6 @@ static int cs35l56_dspwait_asp1tx_put(struct snd_kcontrol *kcontrol, return changed; } -static void cs35l56_mark_asp1_mixer_widgets_dirty(struct cs35l56_private *cs35l56) -{ - struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(cs35l56->component); - const char *prefix = cs35l56->component->name_prefix; - char full_name[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; - const char *name; - struct snd_kcontrol *kcontrol; - struct soc_enum *e; - unsigned int val[4]; - int i, item, ret; - - /* - * Resume so we can read the registers from silicon if the regmap - * cache has not yet been populated. - */ - ret = pm_runtime_resume_and_get(cs35l56->base.dev); - if (ret < 0) - return; - - ret = regmap_bulk_read(cs35l56->base.regmap, CS35L56_ASP1TX1_INPUT, - val, ARRAY_SIZE(val)); - - pm_runtime_mark_last_busy(cs35l56->base.dev); - pm_runtime_put_autosuspend(cs35l56->base.dev); - - if (ret) { - dev_err(cs35l56->base.dev, "Failed to read ASP1 mixer regs: %d\n", ret); - return; - } - - snd_soc_card_mutex_lock(dapm->card); - WARN_ON(!dapm->card->instantiated); - - for (i = 0; i < ARRAY_SIZE(cs35l56_asp1_mux_control_names); ++i) { - name = cs35l56_asp1_mux_control_names[i]; - - if (prefix) { - snprintf(full_name, sizeof(full_name), "%s %s", prefix, name); - name = full_name; - } - - kcontrol = snd_soc_card_get_kcontrol(dapm->card, name); - if (!kcontrol) { - dev_warn(cs35l56->base.dev, "Could not find control %s\n", name); - continue; - } - - e = (struct soc_enum *)kcontrol->private_value; - item = snd_soc_enum_val_to_item(e, val[i] & CS35L56_ASP_TXn_SRC_MASK); - snd_soc_dapm_mux_update_power(dapm, kcontrol, item, e, NULL); - } - - snd_soc_card_mutex_unlock(dapm->card); -} - -static void cs35l56_mux_init_work(struct work_struct *work) -{ - struct cs35l56_private *cs35l56 = container_of(work, - struct cs35l56_private, - mux_init_work); - - cs35l56_mark_asp1_mixer_widgets_dirty(cs35l56); -} - static DECLARE_TLV_DB_SCALE(vol_tlv, -10000, 25, 0); static const struct snd_kcontrol_new cs35l56_controls[] = { @@ -936,14 +933,6 @@ static void cs35l56_dsp_work(struct work_struct *work) else cs35l56_patch(cs35l56, firmware_missing); - - /* - * Set starting value of ASP1 mux widgets. Updating a mux takes - * the DAPM mutex. Post this to a separate job so that DAPM - * power-up can wait for dsp_work to complete without deadlocking - * on the DAPM mutex. - */ - queue_work(cs35l56->dsp_wq, &cs35l56->mux_init_work); err: pm_runtime_mark_last_busy(cs35l56->base.dev); pm_runtime_put_autosuspend(cs35l56->base.dev); @@ -989,6 +978,13 @@ static int cs35l56_component_probe(struct snd_soc_component *component) debugfs_create_bool("can_hibernate", 0444, debugfs_root, &cs35l56->base.can_hibernate); debugfs_create_bool("fw_patched", 0444, debugfs_root, &cs35l56->base.fw_patched); + /* + * The widgets for the ASP1TX mixer can't be initialized + * until the firmware has been downloaded and rebooted. + */ + regcache_drop_region(cs35l56->base.regmap, CS35L56_ASP1TX1_INPUT, CS35L56_ASP1TX4_INPUT); + cs35l56->asp1_mixer_widgets_initialized = false; + queue_work(cs35l56->dsp_wq, &cs35l56->dsp_work); return 0; @@ -999,7 +995,6 @@ static void cs35l56_component_remove(struct snd_soc_component *component) struct cs35l56_private *cs35l56 = snd_soc_component_get_drvdata(component); cancel_work_sync(&cs35l56->dsp_work); - cancel_work_sync(&cs35l56->mux_init_work); if (cs35l56->dsp.cs_dsp.booted) wm_adsp_power_down(&cs35l56->dsp); @@ -1070,10 +1065,8 @@ int cs35l56_system_suspend(struct device *dev) dev_dbg(dev, "system_suspend\n"); - if (cs35l56->component) { + if (cs35l56->component) flush_work(&cs35l56->dsp_work); - cancel_work_sync(&cs35l56->mux_init_work); - } /* * The interrupt line is normally shared, but after we start suspending @@ -1224,7 +1217,6 @@ static int cs35l56_dsp_init(struct cs35l56_private *cs35l56) return -ENOMEM; INIT_WORK(&cs35l56->dsp_work, cs35l56_dsp_work); - INIT_WORK(&cs35l56->mux_init_work, cs35l56_mux_init_work); dsp = &cs35l56->dsp; cs35l56_init_cs_dsp(&cs35l56->base, &dsp->cs_dsp); diff --git a/sound/soc/codecs/cs35l56.h b/sound/soc/codecs/cs35l56.h index 596b141e3f96..b000e7365e40 100644 --- a/sound/soc/codecs/cs35l56.h +++ b/sound/soc/codecs/cs35l56.h @@ -34,7 +34,6 @@ struct cs35l56_private { struct wm_adsp dsp; /* must be first member */ struct cs35l56_base base; struct work_struct dsp_work; - struct work_struct mux_init_work; struct workqueue_struct *dsp_wq; struct snd_soc_component *component; struct regulator_bulk_data supplies[CS35L56_NUM_BULK_SUPPLIES]; @@ -52,6 +51,7 @@ struct cs35l56_private { u8 asp_slot_count; bool tdm_mode; bool sysclk_set; + bool asp1_mixer_widgets_initialized; u8 old_sdw_clock_scale; }; -- 2.30.2

2 1

[PATCH 1/2] ASoC: cs42l43: Handle error from devm_pm_runtime_enable
by Charles Keepax 07 Feb '24

07 Feb '24

As devm_pm_runtime_enable can fail due to memory allocations, it is best to handle the error. Signed-off-by: Charles Keepax <ckeepax(a)opensource.cirrus.com> --- sound/soc/codecs/cs42l43.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/cs42l43.c b/sound/soc/codecs/cs42l43.c index 256767ef4c03..f1e119277622 100644 --- a/sound/soc/codecs/cs42l43.c +++ b/sound/soc/codecs/cs42l43.c @@ -2283,7 +2283,10 @@ static int cs42l43_codec_probe(struct platform_device *pdev) pm_runtime_use_autosuspend(priv->dev); pm_runtime_set_active(priv->dev); pm_runtime_get_noresume(priv->dev); - devm_pm_runtime_enable(priv->dev); + + ret = devm_pm_runtime_enable(priv->dev); + if (ret) + goto err_pm; for (i = 0; i < ARRAY_SIZE(cs42l43_irqs); i++) { ret = cs42l43_request_irq(priv, dom, cs42l43_irqs[i].name, -- 2.30.2

2 2

[PATCH][next] soundwire: intel_auxdevice: remove redundant assignment to variable link_flags
by Colin Ian King 07 Feb '24

07 Feb '24

The variable link_flags is being initialized with a value that is never read, it is being re-assigned later on. The initialization is redundant and can be removed. Cleans up clang scan build warning: drivers/soundwire/intel_auxdevice.c:624:2: warning: Value stored to 'link_flags' is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king(a)gmail.com> --- drivers/soundwire/intel_auxdevice.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/soundwire/intel_auxdevice.c b/drivers/soundwire/intel_auxdevice.c index 93698532deac..95125cc2fc59 100644 --- a/drivers/soundwire/intel_auxdevice.c +++ b/drivers/soundwire/intel_auxdevice.c @@ -621,8 +621,6 @@ static int __maybe_unused intel_resume(struct device *dev) return 0; } - link_flags = md_flags >> (bus->link_id * 8); - if (pm_runtime_suspended(dev)) { dev_dbg(dev, "pm_runtime status was suspended, forcing active\n"); -- 2.39.2

3 2

[linux][PATCH] ASoC: dt-bindings: atmel,sam9x5-wm8731: Convert to json-schema
by Dharma Balasubiramani 06 Feb '24

06 Feb '24

Convert atmel sam9x5-wm8731-audio devicetree binding to json-schema. Signed-off-by: Dharma Balasubiramani <dharma.b(a)microchip.com> --- .../sound/atmel,sam9x5-wm8731-audio.yaml | 76 +++++++++++++++++++ .../sound/atmel-sam9x5-wm8731-audio.txt | 35 --------- 2 files changed, 76 insertions(+), 35 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/atmel,sam9x5-wm8731-audio.yaml delete mode 100644 Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt diff --git a/Documentation/devicetree/bindings/sound/atmel,sam9x5-wm8731-audio.yaml b/Documentation/devicetree/bindings/sound/atmel,sam9x5-wm8731-audio.yaml new file mode 100644 index 000000000000..33717b728f63 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/atmel,sam9x5-wm8731-audio.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/atmel,sam9x5-wm8731-audio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel at91sam9x5ek wm8731 audio complex + +maintainers: + - Dharma Balasubiramani <dharma.b(a)microchip.com> + +description: + The audio complex configuration for Atmel at91sam9x5ek with WM8731 audio codec. + +properties: + compatible: + const: atmel,sam9x5-wm8731-audio + + atmel,model: + $ref: /schemas/types.yaml#/definitions/string + description: The user-visible name of this sound complex. + + atmel,ssc-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the SSC controller. + + atmel,audio-codec: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the WM8731 audio codec. + + atmel,audio-routing: + description: + A list of the connections between audio components. Each entry is a pair + of strings, the first being the connection's sink, the second being the + connection's source. + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + items: + enum: + # Board Connectors + - Headphone Jack + - Line In Jack + + # CODEC Pins + - LOUT + - ROUT + - LHPOUT + - RHPOUT + - LLINEIN + - RLINEIN + - MICIN + +required: + - compatible + - atmel,model + - atmel,ssc-controller + - atmel,audio-codec + - atmel,audio-routing + +additionalProperties: false + +examples: + - | + sound { + compatible = "atmel,sam9x5-wm8731-audio"; + + atmel,model = "wm8731 @ AT91SAM9X5EK"; + + atmel,audio-routing = + "Headphone Jack", "RHPOUT", + "Headphone Jack", "LHPOUT", + "LLINEIN", "Line In Jack", + "RLINEIN", "Line In Jack"; + + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8731>; + }; diff --git a/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt b/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt deleted file mode 100644 index 8facbce53db8..000000000000 --- a/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt +++ /dev/null @@ -1,35 +0,0 @@ -* Atmel at91sam9x5ek wm8731 audio complex - -Required properties: - - compatible: "atmel,sam9x5-wm8731-audio" - - atmel,model: The user-visible name of this sound complex. - - atmel,ssc-controller: The phandle of the SSC controller - - atmel,audio-codec: The phandle of the WM8731 audio codec - - atmel,audio-routing: A list of the connections between audio components. - Each entry is a pair of strings, the first being the connection's sink, - the second being the connection's source. - -Available audio endpoints for the audio-routing table: - -Board connectors: - * Headphone Jack - * Line In Jack - -wm8731 pins: -cf Documentation/devicetree/bindings/sound/wlf,wm8731.yaml - -Example: -sound { - compatible = "atmel,sam9x5-wm8731-audio"; - - atmel,model = "wm8731 @ AT91SAM9X5EK"; - - atmel,audio-routing = - "Headphone Jack", "RHPOUT", - "Headphone Jack", "LHPOUT", - "LLINEIN", "Line In Jack", - "RLINEIN", "Line In Jack"; - - atmel,ssc-controller = <&ssc0>; - atmel,audio-codec = <&wm8731>; -}; -- 2.25.1

3 2

[PATCH] ASoC: amd: yc: Add DMI quirk for Lenovo Ideapad Pro 5 16ARP8
by Mario Limonciello 06 Feb '24

06 Feb '24

The laptop requires a quirk ID to enable its internal microphone. Add it to the DMI quirk table. Reported-by: Stanislav Petrov <stanislav.i.petrov(a)gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=216925 Cc: stable(a)vger.kernel.org Signed-off-by: Mario Limonciello <mario.limonciello(a)amd.com> --- sound/soc/amd/yc/acp6x-mach.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c index 23d44a50d815..80ad60d485ea 100644 --- a/sound/soc/amd/yc/acp6x-mach.c +++ b/sound/soc/amd/yc/acp6x-mach.c @@ -248,6 +248,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "82YM"), } }, + { + .driver_data = &acp6x_card, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "83AS"), + } + }, { .driver_data = &acp6x_card, .matches = { -- 2.34.1

2 1

[PATCH 1/3] ASoC: cs42l43: Add clear of stashed pointer on component remove
by Charles Keepax 06 Feb '24

06 Feb '24

If the component is removed the stashed component pointer in the CODECs private struct should also be cleared to prevent use of a stale pointer. Signed-off-by: Charles Keepax <ckeepax(a)opensource.cirrus.com> --- sound/soc/codecs/cs42l43.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/soc/codecs/cs42l43.c b/sound/soc/codecs/cs42l43.c index 2c402086924d..9e1deb3242cb 100644 --- a/sound/soc/codecs/cs42l43.c +++ b/sound/soc/codecs/cs42l43.c @@ -2111,10 +2111,18 @@ static int cs42l43_component_probe(struct snd_soc_component *component) return 0; } +static void cs42l43_component_remove(struct snd_soc_component *component) +{ + struct cs42l43_codec *priv = snd_soc_component_get_drvdata(component); + + priv->component = NULL; +} + static const struct snd_soc_component_driver cs42l43_component_drv = { .name = "cs42l43-codec", .probe = cs42l43_component_probe, + .remove = cs42l43_component_remove, .set_sysclk = cs42l43_set_sysclk, .set_jack = cs42l43_set_jack, -- 2.30.2

2 3

[PATCH] ASoC: tas2781: add module parameter to tascodec_init()
by Gergo Koteles 05 Feb '24

05 Feb '24

The tascodec_init() of the snd-soc-tas2781-comlib module is called from snd-soc-tas2781-i2c and snd-hda-scodec-tas2781-i2c modules. It calls request_firmware_nowait() with parameter THIS_MODULE and a cont/callback from the latter modules. The latter modules can be removed while their callbacks are running, resulting in a general protection failure. Add module parameter to tascodec_init() so request_firmware_nowait() can be called with the module of the callback. Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver") CC: stable(a)vger.kernel.org Signed-off-by: Gergo Koteles <soyer(a)irl.hu> --- include/sound/tas2781.h | 1 + sound/pci/hda/tas2781_hda_i2c.c | 2 +- sound/soc/codecs/tas2781-comlib.c | 3 ++- sound/soc/codecs/tas2781-i2c.c | 2 +- 4 files changed, 5 insertions(+), 3 deletions(-) diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h index b00d65417c31..9aff384941de 100644 --- a/include/sound/tas2781.h +++ b/include/sound/tas2781.h @@ -142,6 +142,7 @@ struct tasdevice_priv { void tas2781_reset(struct tasdevice_priv *tas_dev); int tascodec_init(struct tasdevice_priv *tas_priv, void *codec, + struct module *module, void (*cont)(const struct firmware *fw, void *context)); struct tasdevice_priv *tasdevice_kzalloc(struct i2c_client *i2c); int tasdevice_init(struct tasdevice_priv *tas_priv); diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c index 2dd809de62e5..1bfb00102a77 100644 --- a/sound/pci/hda/tas2781_hda_i2c.c +++ b/sound/pci/hda/tas2781_hda_i2c.c @@ -710,7 +710,7 @@ static int tas2781_hda_bind(struct device *dev, struct device *master, strscpy(comps->name, dev_name(dev), sizeof(comps->name)); - ret = tascodec_init(tas_hda->priv, codec, tasdev_fw_ready); + ret = tascodec_init(tas_hda->priv, codec, THIS_MODULE, tasdev_fw_ready); if (!ret) comps->playback_hook = tas2781_hda_playback_hook; diff --git a/sound/soc/codecs/tas2781-comlib.c b/sound/soc/codecs/tas2781-comlib.c index b7e56ceb1acf..5d0e5348b361 100644 --- a/sound/soc/codecs/tas2781-comlib.c +++ b/sound/soc/codecs/tas2781-comlib.c @@ -267,6 +267,7 @@ void tas2781_reset(struct tasdevice_priv *tas_dev) EXPORT_SYMBOL_GPL(tas2781_reset); int tascodec_init(struct tasdevice_priv *tas_priv, void *codec, + struct module *module, void (*cont)(const struct firmware *fw, void *context)) { int ret = 0; @@ -280,7 +281,7 @@ int tascodec_init(struct tasdevice_priv *tas_priv, void *codec, tas_priv->dev_name, tas_priv->ndev); crc8_populate_msb(tas_priv->crc8_lkp_tbl, TASDEVICE_CRC8_POLYNOMIAL); tas_priv->codec = codec; - ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT, + ret = request_firmware_nowait(module, FW_ACTION_UEVENT, tas_priv->rca_binaryname, tas_priv->dev, GFP_KERNEL, tas_priv, cont); if (ret) diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index 32913bd1a623..b5abff230e43 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -566,7 +566,7 @@ static int tasdevice_codec_probe(struct snd_soc_component *codec) { struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec); - return tascodec_init(tas_priv, codec, tasdevice_fw_ready); + return tascodec_init(tas_priv, codec, THIS_MODULE, tasdevice_fw_ready); } static void tasdevice_deinit(void *context) base-commit: d4ea2bd1bb502c54380cc44a4130660494679bb8 -- 2.43.0

2 1