February 2024 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] ASoC TDM channel re-mapping
by Edward Cragg 17 Jun '25

17 Jun '25

Hi, We have an ASoC driver in which we have added support for TDM over an I2S interface. We would like to have the capability of re-mapping the channel ordering, for which i know there is a callback in place to start this process, set_channel_map. The only backend implementation of this is using the ALSA API and the .copy handler in an ALSA PCM driver to mutate data copied out of ALSA before it's DMA'd to hardware. This is in sound/soc/blackfin/bf5xx-i2s-pcm.c The problem we have is that the driver we're using currently uses a dmaengine based PCM driver, and i'm not sure whether this is compatible with using the .copy callback, without reimplementing the driver entirely as an ALSA PCM driver. Since there aren't very many examples in mainline, I was hoping to ask for advice for the best way of doing this. I wondered: - Would it be possible to add a functional copy callback using a dmaengine based PCM driver? - Otherwise, would there be a good way to implement channel remapping in a TDM frame using the dmaengine based PCM driver? or - Would the best way indeed be to reimplement the PCM driver as a normal ALSA PCM driver? Thanks, Ed Cragg

2 2

[PATCH] ASoC: qcom: soundwire: Add support for controlling audio CGCR from HLOS
by Srinivasa Rao Mandadapu 17 Jun '25

17 Jun '25

Add support for controlling soundwire audio CGCR interface using clock framework to make hclk ungating with software. As per new hardware changes, software has to always ungate hclk if soundwire is operational and keep it running. This requirement is for latest LPASS chipsets for RX, TX and WSA path to work. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam(a)quicinc.com> Co-developed-by: Venkata Prasad Potturu <quic_potturu(a)quicinc.com> Signed-off-by: Venkata Prasad Potturu <quic_potturu(a)quicinc.com> --- This patch set depends on: -- Clock driver patches with reset control support, yet to be posted. drivers/soundwire/qcom.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index fb183bd..440aad8 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -12,6 +12,7 @@ #include <linux/of_irq.h> #include <linux/of_device.h> #include <linux/regmap.h> +#include <linux/reset.h> #include <linux/slab.h> #include <linux/slimbus.h> #include <linux/soundwire/sdw.h> @@ -129,6 +130,7 @@ struct qcom_swrm_ctrl { struct device *dev; struct regmap *regmap; void __iomem *mmio; + struct reset_control *audio_cgcr; #ifdef CONFIG_DEBUG_FS struct dentry *debugfs; #endif @@ -618,6 +620,8 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl) val = FIELD_PREP(SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_BMSK, ctrl->rows_index); val |= FIELD_PREP(SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_BMSK, ctrl->cols_index); + reset_control_reset(ctrl->audio_cgcr); + ctrl->reg_write(ctrl, SWRM_MCP_FRAME_CTRL_BANK_ADDR(0), val); /* Enable Auto enumeration */ @@ -1269,6 +1273,9 @@ static int qcom_swrm_probe(struct platform_device *pdev) ctrl->bus.ops = &qcom_swrm_ops; ctrl->bus.port_ops = &qcom_swrm_port_ops; ctrl->bus.compute_params = &qcom_swrm_compute_params; + ctrl->audio_cgcr = devm_reset_control_get_exclusive(dev, "swr_audio_cgcr"); + if (IS_ERR(ctrl->audio_cgcr)) + dev_err(dev, "Failed to get audio_cgcr reset required for soundwire-v1.6.0\n"); ret = qcom_swrm_get_port_config(ctrl); if (ret) -- 2.7.4

2 3

[alsa-devel] Applied "ASoC: tlv320aic32x4: Model CODEC_CLKIN in CCF" to the asoc tree
by Mark Brown 17 Jun '25

17 Jun '25

The patch ASoC: tlv320aic32x4: Model CODEC_CLKIN in CCF has been applied to the asoc tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From fd2df3aeafa4b4cc468d58e147e0822967034b71 Mon Sep 17 00:00:00 2001 From: Annaliese McDermond <nh6z(a)nh6z.net> Date: Thu, 21 Mar 2019 17:58:46 -0700 Subject: [PATCH] ASoC: tlv320aic32x4: Model CODEC_CLKIN in CCF Model and manage codec clock input as a component in the Core Clock Framework. This should allow us to do some more complex clock management and power control. Also, some of the on-board chip clocks can be exposed to the outside, and this change will make those clocks easier to consume by other parts of the kernel. Signed-off-by: Annaliese McDermond <nh6z(a)nh6z.net> Signed-off-by: Mark Brown <broonie(a)kernel.org> --- sound/soc/codecs/tlv320aic32x4-clk.c | 34 ++++++++++++++++++++++++++++ sound/soc/codecs/tlv320aic32x4.c | 18 +++++++++++---- 2 files changed, 47 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/tlv320aic32x4-clk.c b/sound/soc/codecs/tlv320aic32x4-clk.c index 5e495fc8d931..cded85009c8c 100644 --- a/sound/soc/codecs/tlv320aic32x4-clk.c +++ b/sound/soc/codecs/tlv320aic32x4-clk.c @@ -265,6 +265,30 @@ static const struct clk_ops aic32x4_pll_ops = { .get_parent = clk_aic32x4_pll_get_parent, }; +static int clk_aic32x4_codec_clkin_set_parent(struct clk_hw *hw, u8 index) +{ + struct clk_aic32x4 *mux = to_clk_aic32x4(hw); + + return regmap_update_bits(mux->regmap, + AIC32X4_CLKMUX, + AIC32X4_CODEC_CLKIN_MASK, index << AIC32X4_CODEC_CLKIN_SHIFT); +} + +static u8 clk_aic32x4_codec_clkin_get_parent(struct clk_hw *hw) +{ + struct clk_aic32x4 *mux = to_clk_aic32x4(hw); + unsigned int val; + + regmap_read(mux->regmap, AIC32X4_CLKMUX, &val); + + return (val & AIC32X4_CODEC_CLKIN_MASK) >> AIC32X4_CODEC_CLKIN_SHIFT; +} + +static const struct clk_ops aic32x4_codec_clkin_ops = { + .set_parent = clk_aic32x4_codec_clkin_set_parent, + .get_parent = clk_aic32x4_codec_clkin_get_parent, +}; + static struct aic32x4_clkdesc aic32x4_clkdesc_array[] = { { .name = "pll", @@ -274,6 +298,14 @@ static struct aic32x4_clkdesc aic32x4_clkdesc_array[] = { .ops = &aic32x4_pll_ops, .reg = 0, }, + { + .name = "codec_clkin", + .parent_names = + (const char *[]) { "mclk", "bclk", "gpio", "pll" }, + .num_parents = 4, + .ops = &aic32x4_codec_clkin_ops, + .reg = 0, + }, }; static struct clk *aic32x4_register_clk(struct device *dev, @@ -314,6 +346,8 @@ int aic32x4_register_clocks(struct device *dev, const char *mclk_name) */ aic32x4_clkdesc_array[0].parent_names = (const char* []) { mclk_name, "bclk", "gpio", "din" }; + aic32x4_clkdesc_array[1].parent_names = + (const char *[]) { mclk_name, "bclk", "gpio", "pll" }; for (i = 0; i < ARRAY_SIZE(aic32x4_clkdesc_array); ++i) aic32x4_register_clk(dev, &aic32x4_clkdesc_array[i]); diff --git a/sound/soc/codecs/tlv320aic32x4.c b/sound/soc/codecs/tlv320aic32x4.c index 7cf8c7cedfe1..5496e4e080f4 100644 --- a/sound/soc/codecs/tlv320aic32x4.c +++ b/sound/soc/codecs/tlv320aic32x4.c @@ -735,12 +735,9 @@ static int aic32x4_setup_clocks(struct snd_soc_component *component, aic32x4_set_processing_blocks(component, aic32x4_divs[i].r_block, aic32x4_divs[i].p_block); - /* PLL as CODEC_CLKIN */ - snd_soc_component_update_bits(component, AIC32X4_CLKMUX, - AIC32X4_CODEC_CLKIN_MASK, - AIC32X4_CODEC_CLKIN_PLL << AIC32X4_CODEC_CLKIN_SHIFT); /* DAC_MOD_CLK as BDIV_CLKIN */ - snd_soc_component_update_bits(component, AIC32X4_IFACE3, AIC32X4_BDIVCLK_MASK, + snd_soc_component_update_bits(component, AIC32X4_IFACE3, + AIC32X4_BDIVCLK_MASK, AIC32X4_DACMOD2BCLK << AIC32X4_BDIVCLK_SHIFT); /* NDAC divider value */ @@ -987,6 +984,15 @@ static int aic32x4_component_probe(struct snd_soc_component *component) { struct aic32x4_priv *aic32x4 = snd_soc_component_get_drvdata(component); u32 tmp_reg; + int ret; + + struct clk_bulk_data clocks[] = { + { .id = "codec_clkin" }, + }; + + ret = devm_clk_bulk_get(component->dev, ARRAY_SIZE(clocks), clocks); + if (ret) + return ret; if (gpio_is_valid(aic32x4->rstn_gpio)) { ndelay(10); @@ -999,6 +1005,8 @@ static int aic32x4_component_probe(struct snd_soc_component *component) if (aic32x4->setup) aic32x4_setup_gpios(component); + clk_set_parent(clocks[0].clk, clocks[1].clk); + /* Power platform configuration */ if (aic32x4->power_cfg & AIC32X4_PWR_MICBIAS_2075_LDOIN) { snd_soc_component_write(component, AIC32X4_MICBIAS, -- 2.20.1

2 1

[PATCH] ASoC: amd: acp: Fix support for a Huawei Matebook laptop
by Marian Postevca 17 Jun '25

17 Jun '25

Previous commit that added support for Huawei MateBook D16 2021 with Ryzen 4600H (HVY-WXX9 M1010) was incomplete. To activate support for this laptop, the DMI table in acp3x-es83xx machine driver must also be updated. Fixes: b5338b1b901e ("ASoC: amd: acp: Add support for a new Huawei Matebook laptop") Signed-off-by: Marian Postevca <posteuca(a)mutex.one> --- sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c b/sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c index f85b85ea4be9..2b0aa270a3e9 100644 --- a/sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c +++ b/sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c @@ -354,6 +354,14 @@ static const struct dmi_system_id acp3x_es83xx_dmi_table[] = { }, .driver_data = (void *)(ES83XX_ENABLE_DMIC|ES83XX_48_MHZ_MCLK), }, + { + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "HUAWEI"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HVY-WXX9"), + DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "M1010"), + }, + .driver_data = (void *)(ES83XX_ENABLE_DMIC), + }, { .matches = { DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "HUAWEI"), -- 2.43.0

2 1

[PATCH 0/9] ALSA: usb-audio: More fixes / improvements on PCM
by Takashi Iwai 22 Apr '25

22 Apr '25

Hi, this is a patch set for USB-audio to fix and improve the PCM stream handling. The primary target is the enhancement of the low-latency playback that was introduced recently for dealing with the small period size (that is used typically by JACK). There are a few other fixes that are relevant with it. The current patches are found in topic/usb-audio branch of sound.git tree, too. Takashi === Takashi Iwai (9): ALSA: usb-audio: Restrict rates for the shared clocks ALSA: usb-audio: Fix possible race at sync of urb completions ALSA: usb-audio: Rename early_playback_start flag with lowlatency_playback ALSA: usb-audio: Disable low-latency playback for free-wheel mode ALSA: usb-audio: Disable low-latency mode for implicit feedback sync ALSA: usb-audio: Check available frames for the next packet size ALSA: usb-audio: Add spinlock to stop_urbs() ALSA: usb-audio: Improved lowlatency playback support ALSA: usb-audio: Avoid killing in-flight URBs during draining sound/usb/card.h | 11 ++- sound/usb/endpoint.c | 230 +++++++++++++++++++++++++++++++------------ sound/usb/endpoint.h | 13 ++- sound/usb/pcm.c | 157 ++++++++++++++++++++++------- 4 files changed, 305 insertions(+), 106 deletions(-) -- 2.26.2

2 23

ALSA 1.2.8 release
by Jaroslav Kysela 15 Apr '25

15 Apr '25

Hello all, new ALSA userspace packages were released. You may download them from the ALSA website http://www.alsa-project.org or directly: HTTP: https://www.alsa-project.org/files/pub FTP: ftp://ftp.alsa-project.org/pub Released packages: alsa-lib alsa-utils alsa-ucm-conf tinycompress Full list of changes: https://www.alsa-project.org/wiki/Changes_v1.2.7.2_v1.2.8 The fingerprint of the public signing key is: F04D F507 37AC 1A88 4C4B 3D71 8380 596D A6E5 9C91 Have fun, Jaroslav -- Jaroslav Kysela <perex(a)perex.cz> Linux Sound Maintainer; ALSA Project; Red Hat, Inc.

2 8

[RESEND PATCH v2] drm/bridge: dw-hdmi-i2s: set insert_pcuv bit if hardware supports it
by Geraldo Nascimento 30 Dec '24

30 Dec '24

Hi Mark, resending this as it failed to apply in my last submission. Added Neil Armstrong to Cc: as hopefully he will be able to better review this. Thanks, Geraldo Nascimento --- Starting with version 2.10a of Synopsys DesignWare HDMI controller the insert_pcuv bit was introduced. On RK3399pro SoM (Radxa Rock Pi N10), for example, if we neglect to set this bit and proceed to enable hdmi_sound and i2s2 on the device tree there will be extreme clipping of sound output, to the point that music sounds like white noise. Problem could also manifest as just mild cracking depending of HDMI audio implementation of sink. Setting insert_pcuv bit (bit 2 of aud_conf2 Audio Sample register) fixes this. Signed-off-by: Geraldo Nascimento <geraldogabriel(a)gmail.com> --- v1->v2: SoC->SoM on description, better commenting, minor style changes, conditional application of fix for L-PCM only --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio-20221017.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio-20221017.c @@ -42,6 +42,7 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data, struct dw_hdmi *hdmi = audio->hdmi; u8 conf0 = 0; u8 conf1 = 0; + u8 conf2 = 0; u8 inputclkfs = 0; /* it cares I2S only */ @@ -101,6 +102,28 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data, return -EINVAL; } + /* + * dw-hdmi introduced insert_pcuv bit in + * version 2.10a. + * + * This single bit (bit 2 of HDMI_AUD_CONF2) + * when set to 1 will enable the insertion of the PCUV + * (Parity, Channel Status, User bit and Validity) + * bits on the incoming audio stream. + * + * Support is limited to Linear PCM audio. If + * neglected, the lack of valid PCUV bits + * on L-PCM streams will cause anything from + * mild cracking to full blown extreme + * clipping depending on the HDMI audio + * implementation of the sink. + * + */ + + if (hdmi_read(audio, HDMI_DESIGN_ID) >= 0x21 && + !(hparms->iec.status[0] & IEC958_AES0_NONAUDIO)) + conf2 = HDMI_AUD_CONF2_INSERT_PCUV; + dw_hdmi_set_sample_rate(hdmi, hparms->sample_rate); dw_hdmi_set_channel_status(hdmi, hparms->iec.status); dw_hdmi_set_channel_count(hdmi, hparms->channels); @@ -109,6 +120,7 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data, hdmi_write(audio, inputclkfs, HDMI_AUD_INPUTCLKFS); hdmi_write(audio, conf0, HDMI_AUD_CONF0); hdmi_write(audio, conf1, HDMI_AUD_CONF1); + hdmi_write(audio, conf2, HDMI_AUD_CONF2); return 0; } --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-20221017.h +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-20221017.h @@ -931,6 +931,11 @@ enum { HDMI_AUD_CONF1_WIDTH_16 = 0x10, HDMI_AUD_CONF1_WIDTH_24 = 0x18, +/* AUD_CONF2 field values */ + HDMI_AUD_CONF2_HBR = 0x01, + HDMI_AUD_CONF2_NLPCM = 0x02, + HDMI_AUD_CONF2_INSERT_PCUV = 0x04, + /* AUD_CTS3 field values */ HDMI_AUD_CTS3_N_SHIFT_OFFSET = 5, HDMI_AUD_CTS3_N_SHIFT_MASK = 0xe0,

3 6

hda: how to implement component master_unbind?
by Kai Vehmanen 20 Dec '24

20 Dec '24

Hi Takashi et al, I've been having multiple discussions with our i915 team w.r.t. audio driver behaviour when the aggregate component is unbound, triggered by i915 unbind. This came up again in the recent regression with devres allocations and I now dug into the topic again. In short, I'm puzzled how to really implement this. ALSA (or ASoC) don't really have support for individual components of a card disappearing in a hotplug fashion. At card level, we do have such support (USB, firewire and recent work for PCI hotplug). But not individual components of a card getting unplugged. In current code we have this: static void hdac_component_master_unbind(struct device *dev) { » struct drm_audio_component *acomp = hdac_get_acomp(dev); » if (acomp->audio_ops && acomp->audio_ops->master_unbind) » » acomp->audio_ops->master_unbind(dev, acomp); » module_put(acomp->ops->owner); » component_unbind_all(dev, acomp); » WARN_ON(acomp->ops || acomp->dev); } ... when e.g. i915 driver is unbound (but could be any driver using the component framework, not jus Intel hw), i915 calls component_del() and HDA gets call to the above. After this, acomp ops are null are audio no longer has ability to talk to i915 driver (which makes sense given it's unbound). If audio was runtime suspended, this kind of works (but relies on some good luck). Upon HDA controller resume, we note acomp ops are NULL and HDMI/DP operations (like snd_hdac_display_power()) silently become no-ops. PCM streaming will go to /dev/null, but this is ok'ish since no monitor can be connected anyways. If audio was active, we start to get warnings or worse. Audio expects hw display codec to be powered and programmed, but suddenly it mey lose state. If the audio controller is actually part of the display hardware (e.g. discrete GPUs), then controller registers can stop functioning (they should be still available, but given the main diplay driver is unbound, odds of suprising behaviour are high). So this is less than ideal. I've been looking at options: 1) prevent/block the unbind if audio device is busy The component framework does not allow individual components to return -EBUSY, so there's no way to let others know that unbind is not possible now. This would force anyone testing DRM driver unbind to first unbind the audio driver and stop any active audio use-cases if needed. 2) unbind the ALSA card I've experimented doing a device_unregister() from the above callback, but this has not really worked (onion peeling exercise of new probelms). The code is shared by multiple controllers, so getting a handle to an snd_card object is not straighforward (drvdata is differnet for SOF and snd-hda-intel for instance). But with some new work, maybe we could call snd_card_disconnect() to detach the card and inform user-space. 3) continue as-is and try to fix bugs If audio is active, maybe we could force a acomp->put_power() to ensure a clean unregister of the display part. But this leaves a big chunk of issues especially with HDA controllers that require the display to be powered on, to function. .. Any ideas, and/or has there been prior work? It seems Takashi it's been mostly you who has been active working on the acomp integration recently. I also included Chris, Daniel and Jani who've had patches to hdac_component.c. Br, Kai

3 5

[PATCH] dt-bindings: sound:atmel-at91sam9g20ek: convert bindings to json-schema
by Balakrishnan Sambath 10 Dec '24

10 Dec '24

Convert atmel-at91sam9g20ek-wm8731-audio DT binding to yaml based json-schema.Change file name to match json-scheme naming. Signed-off-by: Balakrishnan Sambath <balakrishnan.s(a)microchip.com> --- .../bindings/sound/atmel,at91sam9g20ek-wm8731.yaml | 60 ++++++++++++++++++++++ .../sound/atmel-at91sam9g20ek-wm8731-audio.txt | 26 ---------- 2 files changed, 60 insertions(+), 26 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/atmel,at91sam9g20ek-wm8731.yaml b/Documentation/devicetree/bindings/sound/atmel,at91sam9g20ek-wm8731.yaml new file mode 100644 index 000000000000..f6330707fe1b --- /dev/null +++ b/Documentation/devicetree/bindings/sound/atmel,at91sam9g20ek-wm8731.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/atmel,at91sam9g20ek-wm8731.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel at91sam9g20ek wm8731 audio complex + +maintainers: + - Balakrishnan Sambath <balakrishnan.s(a)microchip.com> + +properties: + compatible: + const: atmel,at91sam9g20ek-wm8731-audio + + atmel,model: + $ref: /schemas/types.yaml#/definitions/string + description: The user-visible name of this sound complex. + atmel,audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: A list of the connections between audio components. + minItems: 2 + items: + enum: + # Board Connectors + - "Ext Spk" + - "Int MIC" + + # CODEC Pins + - LHPOUT + - MICIN + atmel,ssc-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the SSC controller + atmel,audio-codec: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of WM8731 audio codec + +required: + - compatible + - atmel,model + - atmel,audio-routing + - atmel,ssc-controller + - atmel,audio-codec + +additionalProperties: false + +examples: + - | + sound { + compatible = "atmel,at91sam9g20ek-wm8731-audio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck0_as_mck>; + atmel,model = "wm8731 @ AT91SAMG20EK"; + atmel,audio-routing = + "Ext Spk", "LHPOUT", + "Int MIC", "MICIN"; + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8731>; + }; diff --git a/Documentation/devicetree/bindings/sound/atmel-at91sam9g20ek-wm8731-audio.txt b/Documentation/devicetree/bindings/sound/atmel-at91sam9g20ek-wm8731-audio.txt deleted file mode 100644 index 9c5a9947b64d..000000000000 --- a/Documentation/devicetree/bindings/sound/atmel-at91sam9g20ek-wm8731-audio.txt +++ /dev/null @@ -1,26 +0,0 @@ -* Atmel at91sam9g20ek wm8731 audio complex - -Required properties: - - compatible: "atmel,at91sam9g20ek-wm8731-audio" - - atmel,model: The user-visible name of this sound complex. - - atmel,audio-routing: A list of the connections between audio components. - - atmel,ssc-controller: The phandle of the SSC controller - - atmel,audio-codec: The phandle of the WM8731 audio codec -Optional properties: - - pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt - -Example: -sound { - compatible = "atmel,at91sam9g20ek-wm8731-audio"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pck0_as_mck>; - - atmel,model = "wm8731 @ AT91SAMG20EK"; - - atmel,audio-routing = - "Ext Spk", "LHPOUT", - "Int MIC", "MICIN"; - - atmel,ssc-controller = <&ssc0>; - atmel,audio-codec = <&wm8731>; -}; --- base-commit: 0dd3ee31125508cd67f7e7172247f05b7fd1753a change-id: 20240214-at91sam9g20ek-wm8731-yaml-404ddddbb91a Best regards, -- Balakrishnan Sambath <balakrishnan.s(a)microchip.com>

5 5

[PATCH v2 0/3] ASoC: mediatek:mt8186: fix both the speaker and hdmi
by Jiaxin Yu 06 Dec '24

06 Dec '24

The speaker and hdmi of mt8186 platform are shared the same port of I2S, when connect the external display, use build-in speakers to play audio, they both playback at the same time. So we want to manage the playback device through DAPM events. Change since v1: Support audio function for it6505 bridge to hdmi-codec Jiaxin Yu (3): ASoC: hdmi-codec: Add event handler for hdmi TX ASoC: mediatek: mt8186: correct the HDMI widgets drm/bridge: it6505: Add audio support drivers/gpu/drm/bridge/ite-it6505.c | 81 +++++++++++++++++-- include/sound/hdmi-codec.h | 6 ++ sound/soc/codecs/hdmi-codec.c | 37 ++++++++- .../mt8186/mt8186-mt6366-da7219-max98357.c | 2 +- .../mt8186/mt8186-mt6366-rt1019-rt5682s.c | 2 +- 5 files changed, 116 insertions(+), 12 deletions(-) -- 2.18.0

3 16