February 2024 - Alsa-devel - mailman.alsa-project.org

[PATCH] ASoC: cs35l56: Prevent bad sign extension in cs35l56_read_silicon_uid()
by Richard Fitzgerald 27 Feb '24

27 Feb '24

Cast u8 values to u32 when using them to build a 32-bit unsigned value that is then stored in a u64. This avoids the possibility of a bad sign extension where the u8 is implicitly extended to an int, thus changing it from an unsigned to a signed value. Whether this is a real problem is debatable, but it does no harm to ensure that the u8 are cast to a suitable type for shifting. Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> Fixes: e1830f66f6c6 ("ASoC: cs35l56: Add helper functions for amp calibration") --- sound/soc/codecs/cs35l56-shared.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/cs35l56-shared.c b/sound/soc/codecs/cs35l56-shared.c index 20b6dbd3fbab..f3670bf85a95 100644 --- a/sound/soc/codecs/cs35l56-shared.c +++ b/sound/soc/codecs/cs35l56-shared.c @@ -659,9 +659,10 @@ static int cs35l56_read_silicon_uid(struct cs35l56_base *cs35l56_base, u64 *uid) return ret; } - unique_id = pte.lot[2] | (pte.lot[1] << 8) | (pte.lot[0] << 16); + unique_id = (u32)pte.lot[2] | ((u32)pte.lot[1] << 8) | ((u32)pte.lot[0] << 16); unique_id <<= 32; - unique_id |= pte.x | (pte.y << 8) | (pte.wafer_id << 16) | (pte.dvs << 24); + unique_id |= (u32)pte.x | ((u32)pte.y << 8) | ((u32)pte.wafer_id << 16) | + ((u32)pte.dvs << 24); dev_dbg(cs35l56_base->dev, "UniqueID = %#llx\n", unique_id); -- 2.39.2

2 1

ALC285 reduce HP pop noise
by Kailang 27 Feb '24

27 Feb '24

Hi Takashi, Lenovo Thinkpad platform with ALC285 which had pop noise from Headphone port on reboot state. Attach patch will reduce it. BR, Kailang

2 1

[PATCH 0/9] ALSA: cs35l56: Apply calibration from EFI
by Richard Fitzgerald 27 Feb '24

27 Feb '24

Factory calibration of the speakers stores the calibration information into an EFI variable. This set of patches adds support for applying speaker calibration data from that EFI variable. Patch #1 and #2 are bugfixes that are prerequisites. The HDA patches #7 and #8 depend on the ASoC patches. Patch #9 is a KUnit test for the new cs-amp-lib library. Richard Fitzgerald (8): ASoC: wm_adsp: Fix missing mutex_lock in wm_adsp_write_ctl() ASoC: wm_adsp: Add wm_adsp_start() and wm_adsp_stop() ASoC: cs-amp-lib: Add helpers for factory calibration data ASoC: cs35l56: Add helper functions for amp calibration ASoC: cs35l56: Apply amp calibration from EFI data ALSA: hda: hda_cs_dsp_ctl: Add helper function to write calibration ALSA: hda: cs35l56: Apply amp calibration from EFI data ASoC: cs-amp-lib: Add KUnit test for calibration helpers Simon Trimmer (1): ALSA: hda: hda_cs_dsp_ctl: Only call notify when a control has been added to a card include/sound/cs-amp-lib.h | 66 +++ include/sound/cs35l56.h | 10 + sound/pci/hda/Kconfig | 2 + sound/pci/hda/cs35l56_hda.c | 36 +- sound/pci/hda/hda_cs_dsp_ctl.c | 52 ++- sound/pci/hda/hda_cs_dsp_ctl.h | 4 + sound/soc/codecs/Kconfig | 18 + sound/soc/codecs/Makefile | 4 + sound/soc/codecs/cs-amp-lib-test.c | 709 +++++++++++++++++++++++++++++ sound/soc/codecs/cs-amp-lib.c | 270 +++++++++++ sound/soc/codecs/cs35l56-sdw.c | 20 + sound/soc/codecs/cs35l56-shared.c | 83 ++++ sound/soc/codecs/cs35l56.c | 43 +- sound/soc/codecs/wm_adsp.c | 30 +- sound/soc/codecs/wm_adsp.h | 2 + 15 files changed, 1328 insertions(+), 21 deletions(-) create mode 100644 include/sound/cs-amp-lib.h create mode 100644 sound/soc/codecs/cs-amp-lib-test.c create mode 100644 sound/soc/codecs/cs-amp-lib.c -- 2.30.2

4 13

[PATCH v9] ASoc: tas2783: Add tas2783 codec driver
by Shenghao Ding 27 Feb '24

27 Feb '24

The tas2783 is a smart audio amplifier with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, and I2S/TDM interfaces designed for portable applications. An on-chip DSP supports Texas Instruments SmartAmp speaker protection algorithm. The integrated speaker voltage and current sense provides for real-time monitoring of lodspeakers. The ASoC component provides the majority of the functionality of the device, all the audio functions. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- Change in v9: - simplify tasdevice_set_sdw_stream - fixed some Linux coding style - fixed the spelling mistakes - Select left/right channel based on unique id - a longer description has been added - remove unused crc8 in KCONFIG - Invert of RE here means reciprocal of RE - correct indentation - correct the wrong pow calibrated register - correct comment on RESET register - fixed usually lines don't end with an open parenthesis - fixed tasdevice_sdw_shutdown - use defines for function, entity, etc. for readable - remove unnecessary codec_lock in component_probe() - remove struct sdw_stream_data - remove unused macro definitions - use BIT(2) and BIT(1) instead of 0x2 and 0x1 - implement pm_runtime - reg_start is u8, reg_start + i only adds i byte, it should be reg_start + i * 4, because the calibration values - fixed total_sz in tas2783_calibration - add a define for TASDEVICE_REG(0, 0, 0x0a) - rework macro style in header file - Add select CRC32 - rewrite the mute and the return value handling - Add comments on bin file - Add link_id into the fw name to distinguish the same sdw id on different sdw id. - remove unnecessary mutex_lock - use set_active() in tasdevice_io_init and move all other parts in the probe. - move pm_runtime_get_noresume to the probe - fix the return value of putvol function - add put_noidle in tasdevice_sdw_remove - remove unused header file(of.h) - correct the style of the multi-line comment - Set the readable registers in tas2783_readable_register for debugfs - Use new PM macros - Use default put and get inline SOC_SINGLE_RANGE_TLV and SOC_SINGLE_SX_TLV - Use respective %pt to log the calibrated time - Remove unnecessary struct tm - Add trailing comma tasdevice_dapm_widgets and tasdevice_audio_map - Rewrite the return value handling in tasdevice_sdw_probe - use dev_num instead of id.unique_id - rework the log - Add code to check the size of calibrated data in UEFI - Add description of Layout of calibrated Data in UEFI - switch back link_id and unique_id to identify the devcie - unique_id offset as the device index of the calibrated data --- sound/soc/codecs/Kconfig | 16 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tas2783-sdw.c | 851 +++++++++++++++++++++++++++++++++ sound/soc/codecs/tas2783.h | 106 ++++ 4 files changed, 975 insertions(+) create mode 100644 sound/soc/codecs/tas2783-sdw.c create mode 100644 sound/soc/codecs/tas2783.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 59f9742e9ff4..6ba3fd0c0811 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -247,6 +247,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_TAS2781_COMLIB imply SND_SOC_TAS2781_FMWLIB imply SND_SOC_TAS2781_I2C + imply SND_SOC_TAS2783 imply SND_SOC_TAS5086 imply SND_SOC_TAS571X imply SND_SOC_TAS5720 @@ -1847,6 +1848,21 @@ config SND_SOC_TAS2781_I2C algo coefficient setting, for one, two or even multiple TAS2781 chips. +config SND_SOC_TAS2783 + tristate "Texas Instruments TAS2783 speaker amplifier (sdw)" + depends on SOUNDWIRE + depends on EFI + select REGMAP + select REGMAP_SOUNDWIRE + select CRC32 + select CRC32_SARWATE + help + Enable support for Texas Instruments TAS2783 Smart Amplifier + Digital input mono Class-D and DSP-inside audio power amplifiers. + TAS2783 supports the MIPI SoundWire v1.2 compatible interface + for audio and control data. At the end of calibrated data appends + the crc data with crc32_sarwate for error detection. + config SND_SOC_TAS5086 tristate "Texas Instruments TAS5086 speaker amplifier" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index f53baa2b9565..6afceb126ae3 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -284,6 +284,7 @@ snd-soc-tas2770-objs := tas2770.o snd-soc-tas2781-comlib-objs := tas2781-comlib.o snd-soc-tas2781-fmwlib-objs := tas2781-fmwlib.o snd-soc-tas2781-i2c-objs := tas2781-i2c.o +snd-soc-tas2783-objs := tas2783-sdw.o snd-soc-tfa9879-objs := tfa9879.o snd-soc-tfa989x-objs := tfa989x.o snd-soc-tlv320adc3xxx-objs := tlv320adc3xxx.o @@ -664,6 +665,7 @@ obj-$(CONFIG_SND_SOC_TAS2780) += snd-soc-tas2780.o obj-$(CONFIG_SND_SOC_TAS2781_COMLIB) += snd-soc-tas2781-comlib.o obj-$(CONFIG_SND_SOC_TAS2781_FMWLIB) += snd-soc-tas2781-fmwlib.o obj-$(CONFIG_SND_SOC_TAS2781_I2C) += snd-soc-tas2781-i2c.o +obj-$(CONFIG_SND_SOC_TAS2783) += snd-soc-tas2783.o obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o obj-$(CONFIG_SND_SOC_TAS571X) += snd-soc-tas571x.o obj-$(CONFIG_SND_SOC_TAS5720) += snd-soc-tas5720.o diff --git a/sound/soc/codecs/tas2783-sdw.c b/sound/soc/codecs/tas2783-sdw.c new file mode 100644 index 000000000000..42a6f70dd108 --- /dev/null +++ b/sound/soc/codecs/tas2783-sdw.c @@ -0,0 +1,851 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// ALSA SoC Texas Instruments TAS2783 Audio Smart Amplifier +// +// Copyright (C) 2023 - 2024 Texas Instruments Incorporated +// https://www.ti.com +// +// Author: Baojun Xu <baojun.xu(a)ti.com> +// Kevin Lu <kevin-lu(a)ti.com> +// Shenghao Ding <shenghao-ding(a)ti.com> +// + +#include <asm/unaligned.h> +#include <linux/acpi.h> +#include <linux/crc32.h> +#include <linux/efi.h> +#include <linux/err.h> +#include <linux/firmware.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> +#include <linux/soundwire/sdw.h> +#include <linux/soundwire/sdw_registers.h> +#include <linux/soundwire/sdw_type.h> +#include <sound/pcm_params.h> +#include <sound/sdw.h> +#include <sound/soc.h> +#include <sound/tlv.h> + +#include <sound/tas2781-tlv.h> +#include "tas2783.h" + +static const unsigned int tas2783_cali_reg[] = { + TAS2783_CALIBRATION_RE, /* Resistance */ + TAS2783_CALIBRATION_RE_LOW, /* Low limitation of RE */ + TAS2783_CALIBRATION_INV_RE, /* Reciprocal of RE */ + TAS2783_CALIBRATION_POW, /* RMS Power */ + TAS2783_CALIBRATION_TLIMIT /* Temperature limitation */ +}; + +static const struct reg_default tas2783_reg_defaults[] = { + /* Default values for ROM mode. Activated. */ + { 0x8002, 0x1a }, /* AMP inactive. */ + { 0x8097, 0xc8 }, + { 0x80b5, 0x74 }, + { 0x8099, 0x20 }, + { 0xfe8d, 0x0d }, + { 0xfebe, 0x4a }, + { 0x8230, 0x00 }, + { 0x8231, 0x00 }, + { 0x8232, 0x00 }, + { 0x8233, 0x01 }, + { 0x8418, 0x00 }, /* Set volume to 0 dB. */ + { 0x8419, 0x00 }, + { 0x841a, 0x00 }, + { 0x841b, 0x00 }, + { 0x8428, 0x40 }, /* Unmute channel */ + { 0x8429, 0x00 }, + { 0x842a, 0x00 }, + { 0x842b, 0x00 }, + { 0x8548, 0x00 }, /* Set volume to 0 dB. */ + { 0x8549, 0x00 }, + { 0x854a, 0x00 }, + { 0x854b, 0x00 }, + { 0x8558, 0x40 }, /* Unmute channel */ + { 0x8559, 0x00 }, + { 0x855a, 0x00 }, + { 0x855b, 0x00 }, + { 0x800a, 0x3a }, /* Enable both channel */ + { 0x800e, 0x44 }, + { 0x800f, 0x40 }, + { 0x805c, 0x99 }, + { SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, TAS2783_SDCA_ENT_FU21, + TAS2783_SDCA_CTL_FU_MUTE, 0), 0 }, + { SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, TAS2783_SDCA_ENT_FU21, + TAS2783_SDCA_CTL_FU_VOLUME, 0), 0 }, + { SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, TAS2783_SDCA_ENT_FU23, + TAS2783_SDCA_CTL_FU_MUTE, 0), 0 }, +}; + +static bool tas2783_readable_register(struct device *dev, + unsigned int reg) +{ + switch (reg) { + case 0x8000 ... 0x807F: /* Page 0 */ + return true; + default: + return false; + } +} + +static bool tas2783_volatile_register(struct device *dev, + unsigned int reg) +{ + switch (reg) { + /* + * Only software reset register was volatiled. + * Bit is self clearing. + * 0b = Don't reset + * 1b = reset + */ + case 0x8001: + return true; + default: + return false; + } +} + +static const struct regmap_config tasdevice_regmap = { + .reg_bits = 32, + .val_bits = 8, + .readable_reg = tas2783_readable_register, + .volatile_reg = tas2783_volatile_register, + .max_register = 0x44ffffff, + .reg_defaults = tas2783_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(tas2783_reg_defaults), + .cache_type = REGCACHE_RBTREE, + .use_single_read = true, + .use_single_write = true, +}; + +static const struct snd_kcontrol_new tas2783_snd_controls[] = { + SOC_SINGLE_RANGE_TLV("Digital Volume", TAS2783_DVC_LVL, + 0, 0, 200, 1, dvc_tlv), + SOC_SINGLE_SX_TLV("Amp Gain Volume", TAS2783_AMP_LEVEL, + 1, 0, 20, amp_vol_tlv), +}; + +static void tas2783_apply_calib(struct tasdevice_priv *tas_dev, + unsigned int *cali_data) +{ + struct regmap *map = tas_dev->regmap; + u8 *cali_start; + u16 offset; + int ret; + + if (!tas_dev->sdw_peripheral) { + dev_err(tas_dev->dev, "%s: peripheral doesn't exist.\n", + __func__); + return; + } + + offset = tas_dev->sdw_peripheral->id.unique_id - + TAS2783_UNIQUE_ID_BASE; + if (offset >= TAS2783_MAX_DEV_NUM) { + dev_err(tas_dev->dev, "%s: offset(%u) is out of range.\n", + __func__, offset); + return; + } + + /* + * The area saving tas2783 calibrated data is specified by its + * unique_id offset. cali_start is the first address of current + * tas2783's calibrated data. + */ + cali_start = (u8 *)(cali_data + offset * sizeof(tas2783_cali_reg)); + for (int i = 0; i < ARRAY_SIZE(tas2783_cali_reg); i++) { + ret = regmap_bulk_write(map, tas2783_cali_reg[i], + &cali_start[4 * i], 4); + if (ret) { + dev_err(tas_dev->dev, "Cali failed %x:%d\n", + tas2783_cali_reg[i], ret); + break; + } + } +} + +/* + * Load the calibration data, including speaker impedance, f0, etc. + * Calibration is done by the manufacturer in the factory. The calibration + * data are used by the algorithm for calculating the speaker temperature, + * speaker membrane excursion and f0 in real time during playback. + * The DSP will work with default data values if calibrated data are + * missing or are invalid. + * Layout of calibrated Data in UEFI: + * Calibrated Data of Dev 0(unique_id offset 0) (20 bytes) + * Calibrated Data of Dev 1(unique_id offset 1) (20 bytes) + * Calibrated Data of Dev 2(unique_id offset 2) (20 bytes) + * Calibrated Data of Dev 3(unique_id offset 3) (20 bytes) + * Calibrated Data of Dev 4(unique_id offset 4) (20 bytes) + * Calibrated Data of Dev 5(unique_id offset 5) (20 bytes) + * Calibrated Data of Dev 6(unique_id offset 6) (20 bytes) + * Calibrated Data of Dev 7(unique_id offset 7) (20 bytes) + * TimeStamp of Calibration (4 bytes) + * CRC (4 bytes) + * Reserved (88 bytes) + */ +static void tas2783_calibration(struct tasdevice_priv *tas_dev) +{ + efi_guid_t efi_guid = EFI_GUID(0x1f52d2a1, 0xbb3a, 0x457d, 0xbc, + 0x09, 0x43, 0xa3, 0xf4, 0x31, 0x0a, 0x92); + static efi_char16_t efi_name[] = L"CALI_DATA"; + struct calibration_data cali_data; + unsigned int *tmp_val; + unsigned int crc; + efi_status_t status; + + cali_data.total_sz = 0; + + status = efi.get_variable(efi_name, &efi_guid, NULL, + &cali_data.total_sz, NULL); + if (status == EFI_BUFFER_TOO_SMALL + && cali_data.total_sz < TAS2783_MAX_CALIDATA_SIZE) { + status = efi.get_variable(efi_name, &efi_guid, NULL, + &cali_data.total_sz, + cali_data.data); + dev_dbg(tas_dev->dev, "%s: cali get %lx bytes result:%ld\n", + __func__, cali_data.total_sz, status); + } + if (status != 0) { + /* Failed got calibration data from EFI. */ + dev_dbg(tas_dev->dev, "No calibration data in UEFI."); + return; + } + + tmp_val = (unsigned int *)cali_data.data; + + /* 8 devs * 20 bytes calibrated data/dev + 4 bytes Timestamp */ + crc = crc32(~0, cali_data.data, 164) ^ ~0; + + if (crc == tmp_val[41]) { + /* Date and time of when calibration was done. */ + tas2783_apply_calib(tas_dev, tmp_val); + dev_dbg(tas_dev->dev, "%ptTs", &tmp_val[40]); + } else { + dev_dbg(tas_dev->dev, "CRC 0x%08x not match 0x%08x\n", + crc, tmp_val[41]); + } +} + +static void tasdevice_dspfw_ready(const struct firmware *fmw, + void *context) +{ + struct tasdevice_priv *tas_dev = + (struct tasdevice_priv *) context; + struct tas2783_firmware_node *p; + struct regmap *map = tas_dev->regmap; + unsigned char *buf = NULL; + int offset = 0, img_sz; + int ret; + + if (!fmw || !fmw->data) { + dev_warn(tas_dev->dev, + "%s: failed to read %s: work in bypass-dsp mode.\n", + __func__, tas_dev->dspfw_binaryname); + return; + } + buf = (unsigned char *)fmw->data; + + img_sz = get_unaligned_le32(&buf[offset]); + offset += sizeof(img_sz); + if (img_sz != fmw->size) { + dev_warn(tas_dev->dev, "%s: size not matching, %d %u.", + __func__, (int)fmw->size, img_sz); + return; + } + + while (offset < img_sz) { + p = (struct tas2783_firmware_node *)(buf + offset); + if (p->length > 1) { + ret = regmap_bulk_write(map, p->download_addr, + buf + offset + sizeof(unsigned int) * 5, p->length); + } else { + ret = regmap_write(map, p->download_addr, + *(buf + offset + sizeof(unsigned int) * 5)); + } + + if (ret != 0) { + dev_dbg(tas_dev->dev, + "%s: load FW fail: %d, work in bypass.\n", + __func__, ret); + return; + } + offset += sizeof(unsigned int) * 5 + p->length; + } + + tas2783_calibration(tas_dev); +} + +static const struct snd_soc_dapm_widget tasdevice_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("ASI", "ASI Playback", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT("ASI OUT", "ASI Capture", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_OUTPUT("OUT"), + SND_SOC_DAPM_INPUT("DMIC"), +}; + +static const struct snd_soc_dapm_route tasdevice_audio_map[] = { + {"OUT", NULL, "ASI"}, + {"ASI OUT", NULL, "DMIC"}, +}; + +static int tasdevice_set_sdw_stream(struct snd_soc_dai *dai, + void *sdw_stream, int direction) +{ + snd_soc_dai_dma_data_set(dai, direction, sdw_stream); + + return 0; +} + +static void tasdevice_sdw_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + snd_soc_dai_set_dma_data(dai, substream, NULL); +} + +static int tasdevice_sdw_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct tasdevice_priv *tas_priv = + snd_soc_component_get_drvdata(component); + struct sdw_stream_config stream_config = {0}; + struct sdw_port_config port_config = {0}; + struct sdw_stream_runtime *sdw_stream; + int ret; + + dev_dbg(dai->dev, "%s: dai_name %s", __func__, dai->name); + sdw_stream = snd_soc_dai_get_dma_data(dai, substream); + + if (!sdw_stream) + return -EINVAL; + + if (!tas_priv->sdw_peripheral) + return -EINVAL; + + /* SoundWire specific configuration */ + snd_sdw_params_to_config(substream, params, + &stream_config, &port_config); + + /* port 1 for playback */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + port_config.num = 1; + else + port_config.num = 2; + + ret = sdw_stream_add_slave(tas_priv->sdw_peripheral, + &stream_config, &port_config, 1, sdw_stream); + if (ret) { + dev_err(dai->dev, "%s: Unable to configure port\n", __func__); + return ret; + } + + dev_dbg(dai->dev, "%s: format: %i rate: %i\n", __func__, + params_format(params), params_rate(params)); + + return 0; +} + +static int tasdevice_sdw_pcm_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct tasdevice_priv *tas_priv = + snd_soc_component_get_drvdata(component); + struct sdw_stream_runtime *sdw_stream = + snd_soc_dai_get_dma_data(dai, substream); + + if (!tas_priv->sdw_peripheral) + return -EINVAL; + + sdw_stream_remove_slave(tas_priv->sdw_peripheral, sdw_stream); + + return 0; +} + +static int tasdevice_mute(struct snd_soc_dai *dai, int mute, + int direction) +{ + struct snd_soc_component *component = dai->component; + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(component); + struct regmap *map = tas_dev->regmap; + int ret; + + dev_dbg(tas_dev->dev, "%s: %d.\n", __func__, mute); + + if (mute) { + if (direction == SNDRV_PCM_STREAM_CAPTURE) { + ret = regmap_update_bits(map, TAS2873_REG_PWR_CTRL, + TAS2783_REG_AEF_MASK, + TAS2783_REG_AEF_INACTIVE); + if (ret) + dev_err(tas_dev->dev, + "%s: Disable AEF failed.\n", __func__); + } else { + /* FU23 mute (0x40400108) */ + ret = regmap_write(map, + SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, + TAS2783_SDCA_ENT_FU23, + TAS2783_SDCA_CTL_FU_MUTE, 0), 1); + if (ret) { + dev_err(tas_dev->dev, + "%s: FU23 mute failed.\n", __func__); + goto out; + } + /* + * Both playback and echo data will be shutdown in + * playback stream. + */ + ret = regmap_update_bits(map, TAS2873_REG_PWR_CTRL, + TAS2783_REG_PWR_MODE_MASK | + TAS2783_REG_AEF_MASK, + TAS2783_REG_PWR_MODE_ACTIVE | + TAS2783_REG_PWR_MODE_SW_PWD); + if (ret) { + dev_err(tas_dev->dev, + "%s: PWR&AEF shutdown failed.\n", + __func__); + goto out; + } + tas_dev->pstream = false; + } + } else { + /* FU23 Unmute, 0x40400108. */ + if (direction == SNDRV_PCM_STREAM_PLAYBACK) { + ret = regmap_write(map, + SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, + TAS2783_SDCA_ENT_FU23, + TAS2783_SDCA_CTL_FU_MUTE, 0), 0); + if (ret) { + dev_err(tas_dev->dev, + "%s: FU23 Unmute failed.\n", __func__); + goto out; + } + ret = regmap_update_bits(map, TAS2873_REG_PWR_CTRL, + TAS2783_REG_PWR_MODE_MASK, + TAS2783_REG_PWR_MODE_ACTIVE); + if (ret) { + dev_err(tas_dev->dev, + "%s: PWR Unmute failed.\n", __func__); + goto out; + } + tas_dev->pstream = true; + } else { + /* Capture stream is the echo ref data for voice. + * Without playback, it can't be active. + */ + if (tas_dev->pstream == true) { + ret = regmap_update_bits(map, + TAS2873_REG_PWR_CTRL, + TAS2783_REG_AEF_MASK, + TAS2783_REG_AEF_ACTIVE); + if (ret) { + dev_err(tas_dev->dev, + "%s: AEF enable failed.\n", + __func__); + goto out; + } + } else { + dev_err(tas_dev->dev, + "%s: No playback, no AEF!", __func__); + ret = -EINVAL; + } + } + } +out: + if (ret) + dev_err(tas_dev->dev, "Mute or unmute %d failed %d.\n", + mute, ret); + + return ret; +} + +static const struct snd_soc_dai_ops tasdevice_dai_ops = { + .mute_stream = tasdevice_mute, + .hw_params = tasdevice_sdw_hw_params, + .hw_free = tasdevice_sdw_pcm_hw_free, + .set_stream = tasdevice_set_sdw_stream, + .shutdown = tasdevice_sdw_shutdown, +}; + +static struct snd_soc_dai_driver tasdevice_dai_driver[] = { + { + .name = "tas2783-codec", + .id = 0, + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 4, + .rates = TAS2783_DEVICE_RATES, + .formats = TAS2783_DEVICE_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 4, + .rates = TAS2783_DEVICE_RATES, + .formats = TAS2783_DEVICE_FORMATS, + }, + .ops = &tasdevice_dai_ops, + .symmetric_rate = 1, + }, +}; + +static int tasdevice_comp_probe(struct snd_soc_component *comp) +{ + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(comp); + acpi_handle handle = ACPI_HANDLE(tas_dev->dev); + const struct firmware *fw_entry = NULL; + const char *sub = NULL; + int ret; + + if (handle) { + sub = acpi_get_subsystem_id(handle); + if (IS_ERR(sub)) + sub = NULL; + } + + tas_dev->component = comp; + + /* + * Each tas2783 in the system has its own dspfw. + */ + if (comp->name_prefix) { + /* + * name_prefix.bin stores the dsp firmware including speaker + * protection algorithm, audio acoustic algorithm, speaker + * characters and algorithm params, it must be copied into + * firmware folder. + */ + scnprintf(tas_dev->dspfw_binaryname, + TAS2783_DSPFW_FILENAME_LEN, "%s-tas2783.bin", + comp->name_prefix); + } else { + /* Compatible with the previous naming rule */ + if (sub) { + /* + * subsys_id-link_id[0,1,...,N]-unique_id[1,...,4].bin + * stores the dsp firmware including speaker protection + * algorithm, audio acoustic algorithm, speaker + * characters and algorithm params, it must be copied + * into firmware folder. + */ + scnprintf(tas_dev->dspfw_binaryname, + TAS2783_DSPFW_FILENAME_LEN, + "%s-%d-%d.bin", sub, + tas_dev->sdw_peripheral->bus->link_id, + tas_dev->sdw_peripheral->id.unique_id); + } else { + /* + * tas2783-link_id[0,1,...,N]-unique_id[1,...,4].bin + * stores the dsp firmware including speaker protection + * algorithm, audio acoustic algorithm, speaker + * characters and algorithm params, it must be copied + * into firmware folder. + */ + scnprintf(tas_dev->dspfw_binaryname, + TAS2783_DSPFW_FILENAME_LEN, + "tas2783-%d-%d.bin", + tas_dev->sdw_peripheral->bus->link_id, + tas_dev->sdw_peripheral->id.unique_id); + } + } + + ret = request_firmware(&fw_entry, tas_dev->dspfw_binaryname, + tas_dev->dev); + if (ret) { + dev_err(tas_dev->dev, + "%s: request_firmware %x open status: %d.\n", __func__, + tas_dev->sdw_peripheral->id.unique_id, ret); + goto out; + } + + tasdevice_dspfw_ready(fw_entry, tas_dev); + +out: + if (fw_entry) + release_firmware(fw_entry); + return 0; +} + +static const struct snd_soc_component_driver + soc_codec_driver_tasdevice = { + .probe = tasdevice_comp_probe, + .controls = tas2783_snd_controls, + .num_controls = ARRAY_SIZE(tas2783_snd_controls), + .dapm_widgets = tasdevice_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(tasdevice_dapm_widgets), + .dapm_routes = tasdevice_audio_map, + .num_dapm_routes = ARRAY_SIZE(tasdevice_audio_map), + .idle_bias_on = 1, + .endianness = 1, +}; + +static int tasdevice_init(struct tasdevice_priv *tas_dev) +{ + int ret; + + dev_set_drvdata(tas_dev->dev, tas_dev); + + ret = devm_snd_soc_register_component(tas_dev->dev, + &soc_codec_driver_tasdevice, + tasdevice_dai_driver, ARRAY_SIZE(tasdevice_dai_driver)); + if (ret) { + dev_err(tas_dev->dev, "%s: codec register error:%d.\n", + __func__, ret); + return ret; + } + + /* set autosuspend parameters */ + pm_runtime_set_autosuspend_delay(tas_dev->dev, 3000); + pm_runtime_use_autosuspend(tas_dev->dev); + + /* make sure the device does not suspend immediately */ + pm_runtime_mark_last_busy(tas_dev->dev); + pm_runtime_enable(tas_dev->dev); + + return 0; +} + +static int tasdevice_read_prop(struct sdw_slave *slave) +{ + struct sdw_slave_prop *prop = &slave->prop; + struct sdw_dpn_prop *dpn; + unsigned long addr; + int nval, i, j; + u32 bit; + + prop->scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY; + prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY; + + prop->paging_support = true; + + /* first we need to allocate memory for set bits in port lists */ + prop->source_ports = BIT(2); /* BITMAP: 00000100 */ + prop->sink_ports = BIT(1); /* BITMAP: 00000010 */ + + nval = hweight32(prop->source_ports); + prop->src_dpn_prop = devm_kcalloc(&slave->dev, nval, + sizeof(*prop->src_dpn_prop), GFP_KERNEL); + if (!prop->src_dpn_prop) + return -ENOMEM; + + i = 0; + dpn = prop->src_dpn_prop; + addr = prop->source_ports; + for_each_set_bit(bit, &addr, 32) { + dpn[i].num = bit; + dpn[i].type = SDW_DPN_FULL; + dpn[i].simple_ch_prep_sm = true; + dpn[i].ch_prep_timeout = 10; + i++; + } + + /* do this again for sink now */ + nval = hweight32(prop->sink_ports); + prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval, + sizeof(*prop->sink_dpn_prop), GFP_KERNEL); + if (!prop->sink_dpn_prop) + return -ENOMEM; + + j = 0; + dpn = prop->sink_dpn_prop; + addr = prop->sink_ports; + for_each_set_bit(bit, &addr, 32) { + dpn[j].num = bit; + dpn[j].type = SDW_DPN_FULL; + dpn[j].simple_ch_prep_sm = true; + dpn[j].ch_prep_timeout = 10; + j++; + } + + /* set the timeout values */ + prop->clk_stop_timeout = 20; + + return 0; +} + +static int tasdevice_io_init(struct device *dev, + struct sdw_slave *slave) +{ + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev); + int ret; + + regcache_cache_only(tas_priv->regmap, false); + + if (tas_priv->first_hw_init) { + regcache_cache_bypass(tas_priv->regmap, true); + } else { + /* + * PM runtime is only enabled when a Slave reports as Attached + * Update count of parent 'active' children. + */ + pm_runtime_set_active(&slave->dev); + } + + /* sw reset */ + ret = regmap_write(tas_priv->regmap, TAS2873_REG_SWRESET, + TAS2873_REG_SWRESET_RESET); + if (ret) { + dev_err(tas_priv->dev, "Reset failed.\n"); + goto out; + } + + if (tas_priv->first_hw_init) { + regcache_cache_bypass(tas_priv->regmap, false); + regcache_mark_dirty(tas_priv->regmap); + } + + tas_priv->first_hw_init = true; + tas_priv->hw_init = true; + +out: + return ret; +} + +static int tasdevice_update_status(struct sdw_slave *slave, + enum sdw_slave_status status) +{ + struct tasdevice_priv *tas_priv = dev_get_drvdata(&slave->dev); + + /* Update the status */ + tas_priv->status = status; + + if (status == SDW_SLAVE_UNATTACHED) + tas_priv->hw_init = false; + /* + * Perform initialization only if slave status + * is present and hw_init flag is false + */ + if (tas_priv->hw_init || tas_priv->status != SDW_SLAVE_ATTACHED) + return 0; + + /* perform I/O transfers required for Slave initialization */ + return tasdevice_io_init(&slave->dev, slave); +} + +/* + * slave_ops: callbacks for get_clock_stop_mode, clock_stop and + * port_prep are not defined for now + */ +static const struct sdw_slave_ops tasdevice_sdw_ops = { + .read_prop = tasdevice_read_prop, + .update_status = tasdevice_update_status, +}; + +static int tasdevice_sdw_probe(struct sdw_slave *peripheral, + const struct sdw_device_id *id) +{ + struct device *dev = &peripheral->dev; + struct tasdevice_priv *tas_dev; + + tas_dev = devm_kzalloc(dev, sizeof(*tas_dev), GFP_KERNEL); + if (!tas_dev) + return -ENOMEM; + + tas_dev->dev = dev; + tas_dev->chip_id = id->driver_data; + tas_dev->sdw_peripheral = peripheral; + /* + * Mark hw_init to false + * HW init will be performed when device reports present + */ + tas_dev->hw_init = false; + tas_dev->first_hw_init = false; + + dev_set_drvdata(dev, tas_dev); + + tas_dev->regmap = devm_regmap_init_sdw(peripheral, &tasdevice_regmap); + if (IS_ERR(tas_dev->regmap)) + return dev_err_probe(dev, PTR_ERR(tas_dev->regmap), + "Failed devm_regmap_init_sdw."); + + return tasdevice_init(tas_dev); +} + +static int tasdevice_sdw_remove(struct sdw_slave *peripheral) +{ + struct tasdevice_priv *tas_dev = dev_get_drvdata(&peripheral->dev); + + if (tas_dev->first_hw_init) + pm_runtime_disable(tas_dev->dev); + + return 0; +} + +static const struct sdw_device_id tasdevice_sdw_id[] = { + SDW_SLAVE_ENTRY(0x0102, 0x0000, 0), + {} +}; +MODULE_DEVICE_TABLE(sdw, tasdevice_sdw_id); + +static int __maybe_unused tas2783_sdca_dev_suspend(struct device *dev) +{ + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev); + + if (!tas_priv->hw_init) + return 0; + + regcache_cache_only(tas_priv->regmap, true); + + return 0; +} + +#define TAS2783_PROBE_TIMEOUT_MS 5000 + +static int __maybe_unused tas2783_sdca_dev_resume(struct device *dev) +{ + struct sdw_slave *slave = dev_to_sdw_dev(dev); + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev); + unsigned long time; + + if (!tas_priv->first_hw_init) + return 0; + + if (!slave->unattach_request) + goto regmap_sync; + + time = wait_for_completion_timeout(&slave->initialization_complete, + msecs_to_jiffies(TAS2783_PROBE_TIMEOUT_MS)); + if (!time) { + dev_err(&slave->dev, "Init not complete, timed out\n"); + sdw_show_ping_status(slave->bus, true); + + return -ETIMEDOUT; + } + +regmap_sync: + slave->unattach_request = 0; + regcache_cache_only(tas_priv->regmap, false); + regcache_sync(tas_priv->regmap); + + return 0; +} + +static const struct dev_pm_ops tas2783_sdca_pm = { + SYSTEM_SLEEP_PM_OPS(tas2783_sdca_dev_suspend, + tas2783_sdca_dev_resume) + RUNTIME_PM_OPS(tas2783_sdca_dev_suspend, + tas2783_sdca_dev_resume, NULL) +}; + +static struct sdw_driver tasdevice_sdw_driver = { + .driver = { + .name = "slave-tas2783", + .pm = &tas2783_sdca_pm, + }, + .probe = tasdevice_sdw_probe, + .remove = tasdevice_sdw_remove, + .ops = &tasdevice_sdw_ops, + .id_table = tasdevice_sdw_id, +}; + +module_sdw_driver(tasdevice_sdw_driver); + +MODULE_AUTHOR("Baojun Xu <baojun.xu(a)ti.com>"); +MODULE_AUTHOR("Shenghao Ding <shenghao-ding(a)ti.com>"); +MODULE_DESCRIPTION("ASoC TAS2783 SoundWire Driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/tas2783.h b/sound/soc/codecs/tas2783.h new file mode 100644 index 000000000000..631776dcec4c --- /dev/null +++ b/sound/soc/codecs/tas2783.h @@ -0,0 +1,106 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * ALSA SoC Texas Instruments TAS2783 Audio Smart Amplifier + * + * Copyright (C) 2023 - 2024 Texas Instruments Incorporated + * https://www.ti.com + * + * Author: Baojun Xu <baojun.xu(a)ti.com> + * Shenghao Ding <shenghao-ding(a)ti.com> + */ + +#ifndef __TAS2783_H__ +#define __TAS2783_H__ + +/* Unique id start */ +#define TAS2783_UNIQUE_ID_BASE 0x08 +#define TAS2783_MAX_DEV_NUM 8 + +#define TAS2783_DEVICE_RATES (SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000 | \ + SNDRV_PCM_RATE_96000 | \ + SNDRV_PCM_RATE_88200) + +#define TAS2783_DEVICE_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +/* BOOK, PAGE Control Register */ +#define TASDEVICE_REG(book, page, reg) ((book * 256 * 256) + 0x8000 + \ + (page * 128) + reg) + +/*Software Reset */ +#define TAS2873_REG_SWRESET TASDEVICE_REG(0x0, 0x00, 0x01) +#define TAS2873_REG_SWRESET_MASK BIT(0) +#define TAS2873_REG_SWRESET_RESET BIT(0) + +#define TAS2873_REG_PWR_CTRL TASDEVICE_REG(0x0, 0x00, 0x02) +#define TAS2783_REG_AEF_MASK GENMASK(4, 3) +#define TAS2783_REG_AEF_ACTIVE 0 +#define TAS2783_REG_AEF_INACTIVE GENMASK(4, 3) +#define TAS2783_REG_PWR_MODE_MASK GENMASK(2, 0) +#define TAS2783_REG_PWR_MODE_ACTIVE 0 +#define TAS2783_REG_PWR_MODE_SW_PWD BIT(1) + +#define TAS2783_REG_TDM_RX_CFG TASDEVICE_REG(0x0, 0x00, 0x0a) + +/* Volume control */ +#define TAS2783_DVC_LVL TASDEVICE_REG(0x0, 0x00, 0x1a) +#define TAS2783_AMP_LEVEL TASDEVICE_REG(0x0, 0x00, 0x03) +#define TAS2783_AMP_LEVEL_MASK GENMASK(5, 1) + +/* Calibration data */ +#define TAS2783_CALIBRATION_RE TASDEVICE_REG(0x0, 0x17, 0x74) +#define TAS2783_CALIBRATION_RE_LOW TASDEVICE_REG(0x0, 0x18, 0x14) +#define TAS2783_CALIBRATION_INV_RE TASDEVICE_REG(0x0, 0x18, 0x0c) +#define TAS2783_CALIBRATION_POW TASDEVICE_REG(0x0, 0x13, 0x70) +#define TAS2783_CALIBRATION_TLIMIT TASDEVICE_REG(0x0, 0x18, 0x7c) + +/* TAS2783 SDCA Control - function number */ +#define TAS2783_FUNC_TYPE_SMART_AMP 0x01 + +/* TAS2783 SDCA entity */ +#define TAS2783_SDCA_ENT_FU21 0x01 +#define TAS2783_SDCA_ENT_FU23 0x02 + +/* TAS2783 SDCA control */ +#define TAS2783_SDCA_CTL_REQ_POWER_STATE 0x01 +#define TAS2783_SDCA_CTL_FU_MUTE 0x01 +#define TAS2783_SDCA_CTL_FU_VOLUME 0x02 +#define TAS2783_SDCA_CTL_UDMPU_CLUSTER 0x10 + +#define TAS2783_DEVICE_CHANNEL_LEFT 1 +#define TAS2783_DEVICE_CHANNEL_RIGHT 2 +#define TAS2783_DSPFW_FILENAME_LEN 64 + +#define TAS2783_MAX_CALIDATA_SIZE 256 + +struct tas2783_firmware_node { + unsigned int vendor_id; + unsigned int file_id; + unsigned int version_id; + unsigned int length; + unsigned int download_addr; +}; + +struct calibration_data { + unsigned long total_sz; + unsigned char data[TAS2783_MAX_CALIDATA_SIZE]; +}; + +struct tasdevice_priv { + struct snd_soc_component *component; + struct sdw_slave *sdw_peripheral; + enum sdw_slave_status status; + struct sdw_bus_params params; + struct regmap *regmap; + struct device *dev; + unsigned char dspfw_binaryname[TAS2783_DSPFW_FILENAME_LEN]; + unsigned char dev_name[32]; + unsigned int chip_id; + bool pstream; + bool hw_init; + bool first_hw_init; +}; + +#endif /*__TAS2783_H__ */ -- 2.34.1

4 5

[PATCH 0/6] ASoC: meson: axg fixes and clean-up
by Jerome Brunet 26 Feb '24

26 Feb '24

This are various fixes and clean up gathered while working on Amlogic audio support. These help better handle higher and unusual clock configuration for TDM, SPDIF or PDM. Jerome Brunet (6): ASoC: meson: axg-tdm-interface: fix mclk setup without mclk-fs ASoC: meson: axg-tdm-interface: add frame rate constraint ASoC: meson: axg-tdm-interface: update error format error traces ASoC: meson: axg-spdifin: use max width for rate detection ASoC: meson: axg-fifo: take continuous rates ASoC: meson: axg-fifo: use FIELD helpers sound/soc/meson/axg-fifo.c | 24 +++++++++++----------- sound/soc/meson/axg-fifo.h | 14 +++++-------- sound/soc/meson/axg-frddr.c | 12 +++++++---- sound/soc/meson/axg-spdifin.c | 6 +++--- sound/soc/meson/axg-tdm-interface.c | 31 +++++++++++++++++++---------- sound/soc/meson/axg-toddr.c | 29 ++++++++++++++------------- 6 files changed, 64 insertions(+), 52 deletions(-) -- 2.43.0

2 10

[PATCH 0/6] ASoC: codecs: Simplify mclk initialization
by Cezary Rojewski 26 Feb '24

26 Feb '24

The patchset may not cover all codecs found in the codecs/ directory - noticed a possible improvement and grepped for similar pattern across C files found in the directory. Those addressed here seem pretty straightforward. Most of clk_xxx() functions do check if provided clk-pointer is non-NULL. These do not check if the pointer is an error-pointer. Providing such to a clk_xxx() results in a panic. By utilizing _optional() variant of devm_clk_get() the driver code is both simplified and more robust. There is no need to remember about IS_ERR(clk) checks each time mclk is accessed. Cezary Rojewski (6): ASoC: codecs: da7213: Simplify mclk initialization ASoC: codecs: nau8825: Simplify mclk initialization ASoC: codecs: rt5514: Simplify mclk initialization ASoC: codecs: rt5616: Simplify mclk initialization ASoC: codecs: rt5640: Simplify mclk initialization ASoC: codecs: rt5660: Simplify mclk initialization sound/soc/codecs/da7213.c | 12 ++++-------- sound/soc/codecs/nau8825.c | 12 ++++-------- sound/soc/codecs/rt5514.c | 9 +++------ sound/soc/codecs/rt5616.c | 9 +++------ sound/soc/codecs/rt5640.c | 9 +++------ sound/soc/codecs/rt5660.c | 9 +++------ 6 files changed, 20 insertions(+), 40 deletions(-) -- 2.25.1

2 7

[PATCH v4 0/2] ASoC: codecs: tx-macro: correct TX SMIC MUXn widgets on SM8350+
by Krzysztof Kozlowski 26 Feb '24

26 Feb '24

Hi, Changelog in individual patches. v2: https://lore.kernel.org/alsa-devel/20240125153110.410295-1-krzysztof.kozlow… v1: https://lore.kernel.org/all/20230717140138.201745-1-krzysztof.kozlowski@lin… Best regards, Krzysztof Krzysztof Kozlowski (2): ASoC: codecs: tx-macro: split widgets per different LPASS versions ASoC: codecs: tx-macro: correct TX SMIC MUXn widgets on SM8350+ sound/soc/codecs/lpass-macro-common.h | 7 + sound/soc/codecs/lpass-tx-macro.c | 679 +++++++++++++++++++------- 2 files changed, 514 insertions(+), 172 deletions(-) -- 2.34.1

2 4

[PATCH v3 0/2] ASoC: codecs: tx-macro: correct TX SMIC MUXn widgets on SM8350+
by Krzysztof Kozlowski 26 Feb '24

26 Feb '24

Hi, Changelog in individual patches. v2: https://lore.kernel.org/alsa-devel/20240125153110.410295-1-krzysztof.kozlow… v1: https://lore.kernel.org/all/20230717140138.201745-1-krzysztof.kozlowski@lin… Best regards, Krzysztof Krzysztof Kozlowski (2): ASoC: codecs: tx-macro: split widgets per different LPASS versions ASoC: codecs: tx-macro: correct TX SMIC MUXn widgets on SM8350+ sound/soc/codecs/lpass-macro-common.h | 7 + sound/soc/codecs/lpass-tx-macro.c | 671 +++++++++++++++++++------- 2 files changed, 506 insertions(+), 172 deletions(-) -- 2.34.1

2 4

[PATCH v2 0/4] ALSA/ASoC: Conditionally skip i915 init and cleanups
by Cezary Rojewski 26 Feb '24

26 Feb '24

A small set of changes to improve initialization of the audio stack on HDAudio devices and pair of cleanups. As the first change is the most important one here, following is the technical background for it: Commit 78f613ba1efb ("drm/i915: finish removal of CNL") and its friends removed support for i915 for all CNL-based platforms. HDAudio library, however, still treats such platforms as valid candidates for i915 binding. Update query mechanism to reflect changes made in drm tree. At the same time, i915 support for LKF-based platforms has not been provided so remove them from valid binding candidates. The snd_soc_hda change is a follow up for the above and the cleanup patches do not bring any functional changes. Changes in v2: - list of problematic VGA devices is now declared locally, no more touching drm stuff Cezary Rojewski (4): ALSA: hda: Skip i915 initialization on CNL/LKF-based platforms ASoC: codecs: hda: Skip HDMI/DP registration if i915 is missing ASoC: codecs: hda: Cleanup error messages ALSA: hda: Reuse for_each_pcm_streams() sound/hda/hdac_i915.c | 32 +++++++++++++++++++++++++++++--- sound/pci/hda/hda_codec.c | 2 +- sound/soc/codecs/hda.c | 15 ++++++++++----- 3 files changed, 40 insertions(+), 9 deletions(-) -- 2.25.1

4 12

[tiwai-sound:test/guard 50/70] sound/core/rawmidi.c:1012:6: error: cannot jump from this asm goto statement to one of its possible targets
by kernel test robot 25 Feb '24

25 Feb '24

Hi Takashi, FYI, the error/warning was bisected to this commit, please ignore it if it's irrelevant. tree: https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git test/guard head: 0ba3f403c3b7fdd2683aac6285903f92ba81c32d commit: 369c285f8405ec663691db39ec59a01c70f80ded [50/70] ALSA: rawmidi: Use guard() for locking config: powerpc-randconfig-r081-20240225 (https://download.01.org/0day-ci/archive/20240225/202402251935.CGUH0Id9-lkp@…) compiler: clang version 15.0.7 (https://github.com/llvm/llvm-project.git 8dfdcc7b7bf66834a761bd8de445840ef68e4d1a) reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240225/202402251935.CGUH0Id9-lkp@…) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp(a)intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202402251935.CGUH0Id9-lkp@intel.com/ All errors (new ones prefixed by >>): >> sound/core/rawmidi.c:1012:6: error: cannot jump from this asm goto statement to one of its possible targets if (put_user(device, argp)) ^ arch/powerpc/include/asm/uaccess.h:66:5: note: expanded from macro 'put_user' __put_user(x, _pu_addr) : -EFAULT; \ ^ arch/powerpc/include/asm/uaccess.h:48:3: note: expanded from macro '__put_user' __put_user_size_goto(__pu_val, __pu_addr, __pu_size, __pu_failed); \ ^ arch/powerpc/include/asm/uaccess.h:116:10: note: expanded from macro '__put_user_size_goto' case 1: __put_user_asm_goto(x, __pus_addr, label, "stb"); break; \ ^ arch/powerpc/include/asm/uaccess.h:86:2: note: expanded from macro '__put_user_asm_goto' asm_volatile_goto( \ ^ include/linux/compiler_types.h:366:33: note: expanded from macro 'asm_volatile_goto' #define asm_volatile_goto(x...) asm goto(x) ^ sound/core/rawmidi.c:996:6: note: possible target of asm goto statement if (get_user(device, argp)) ^ arch/powerpc/include/asm/uaccess.h:295:5: note: expanded from macro 'get_user' __get_user(x, _gu_addr) : \ ^ arch/powerpc/include/asm/uaccess.h:283:2: note: expanded from macro '__get_user' __get_user_size_allowed(__gu_val, __gu_addr, __gu_size, __gu_err); \ ^ arch/powerpc/include/asm/uaccess.h:201:16: note: expanded from macro '__get_user_size_allowed' break; \ ^ sound/core/rawmidi.c:1000:2: note: jump exits scope of variable with __attribute__((cleanup)) guard(mutex)(&register_mutex); ^ include/linux/cleanup.h:164:15: note: expanded from macro 'guard' CLASS(_name, __UNIQUE_ID(guard)) ^ include/linux/compiler.h:180:29: note: expanded from macro '__UNIQUE_ID' #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__) ^ include/linux/compiler_types.h:84:22: note: expanded from macro '__PASTE' #define __PASTE(a,b) ___PASTE(a,b) ^ include/linux/compiler_types.h:83:23: note: expanded from macro '___PASTE' #define ___PASTE(a,b) a##b ^ <scratch space>:5:1: note: expanded from here __UNIQUE_ID_guard309 ^ sound/core/rawmidi.c:996:6: error: cannot jump from this asm goto statement to one of its possible targets if (get_user(device, argp)) ^ arch/powerpc/include/asm/uaccess.h:295:5: note: expanded from macro 'get_user' __get_user(x, _gu_addr) : \ ^ arch/powerpc/include/asm/uaccess.h:283:2: note: expanded from macro '__get_user' __get_user_size_allowed(__gu_val, __gu_addr, __gu_size, __gu_err); \ ^ arch/powerpc/include/asm/uaccess.h:199:3: note: expanded from macro '__get_user_size_allowed' __get_user_size_goto(x, ptr, size, __gus_failed); \ ^ arch/powerpc/include/asm/uaccess.h:187:10: note: expanded from macro '__get_user_size_goto' case 1: __get_user_asm_goto(x, (u8 __user *)ptr, label, "lbz"); break; \ ^ arch/powerpc/include/asm/uaccess.h:158:2: note: expanded from macro '__get_user_asm_goto' asm_volatile_goto( \ ^ include/linux/compiler_types.h:366:33: note: expanded from macro 'asm_volatile_goto' #define asm_volatile_goto(x...) asm goto(x) ^ sound/core/rawmidi.c:1012:6: note: possible target of asm goto statement if (put_user(device, argp)) ^ arch/powerpc/include/asm/uaccess.h:66:5: note: expanded from macro 'put_user' __put_user(x, _pu_addr) : -EFAULT; \ ^ arch/powerpc/include/asm/uaccess.h:52:9: note: expanded from macro '__put_user' \ ^ sound/core/rawmidi.c:1000:2: note: jump bypasses initialization of variable with __attribute__((cleanup)) guard(mutex)(&register_mutex); ^ include/linux/cleanup.h:164:15: note: expanded from macro 'guard' CLASS(_name, __UNIQUE_ID(guard)) ^ include/linux/compiler.h:180:29: note: expanded from macro '__UNIQUE_ID' #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__) ^ include/linux/compiler_types.h:84:22: note: expanded from macro '__PASTE' #define __PASTE(a,b) ___PASTE(a,b) ^ include/linux/compiler_types.h:83:23: note: expanded from macro '___PASTE' #define ___PASTE(a,b) a##b ^ <scratch space>:5:1: note: expanded from here __UNIQUE_ID_guard309 ^ 2 errors generated. Kconfig warnings: (for reference only) WARNING: unmet direct dependencies detected for SND_SOC_MPC5200_AC97 Depends on [n]: SOUND [=m] && SND [=m] && SND_SOC [=m] && SND_POWERPC_SOC [=m] && PPC_MPC52xx [=y] && PPC_BESTCOMM [=n] Selected by [m]: - SND_MPC52xx_SOC_EFIKA [=m] && SOUND [=m] && SND [=m] && SND_SOC [=m] && SND_POWERPC_SOC [=m] && PPC_EFIKA [=y] WARNING: unmet direct dependencies detected for ADB_CUDA Depends on [n]: MACINTOSH_DRIVERS [=n] && (ADB [=n] || PPC_PMAC [=y]) && !PPC_PMAC64 [=n] Selected by [y]: - PPC_PMAC [=y] && PPC_BOOK3S [=y] && CPU_BIG_ENDIAN [=y] && POWER_RESET [=y] && PPC32 [=y] vim +1012 sound/core/rawmidi.c ^1da177e4c3f41 Linus Torvalds 2005-04-16 986 127ae6f6dad2ed Takashi Iwai 2023-05-23 987 /* ioctl to find the next device; either legacy or UMP depending on @find_ump */ 127ae6f6dad2ed Takashi Iwai 2023-05-23 988 static int snd_rawmidi_next_device(struct snd_card *card, int __user *argp, 127ae6f6dad2ed Takashi Iwai 2023-05-23 989 bool find_ump) ^1da177e4c3f41 Linus Torvalds 2005-04-16 990 ^1da177e4c3f41 Linus Torvalds 2005-04-16 991 { 127ae6f6dad2ed Takashi Iwai 2023-05-23 992 struct snd_rawmidi *rmidi; ^1da177e4c3f41 Linus Torvalds 2005-04-16 993 int device; 127ae6f6dad2ed Takashi Iwai 2023-05-23 994 bool is_ump; ^1da177e4c3f41 Linus Torvalds 2005-04-16 995 127ae6f6dad2ed Takashi Iwai 2023-05-23 996 if (get_user(device, argp)) ^1da177e4c3f41 Linus Torvalds 2005-04-16 997 return -EFAULT; a7a13d0676335a Dan Carpenter 2010-09-09 998 if (device >= SNDRV_RAWMIDI_DEVICES) /* next device is -1 */ a7a13d0676335a Dan Carpenter 2010-09-09 999 device = SNDRV_RAWMIDI_DEVICES - 1; 369c285f8405ec Takashi Iwai 2024-02-21 1000 guard(mutex)(&register_mutex); ^1da177e4c3f41 Linus Torvalds 2005-04-16 1001 device = device < 0 ? 0 : device + 1; 127ae6f6dad2ed Takashi Iwai 2023-05-23 1002 for (; device < SNDRV_RAWMIDI_DEVICES; device++) { 127ae6f6dad2ed Takashi Iwai 2023-05-23 1003 rmidi = snd_rawmidi_search(card, device); 127ae6f6dad2ed Takashi Iwai 2023-05-23 1004 if (!rmidi) 127ae6f6dad2ed Takashi Iwai 2023-05-23 1005 continue; 127ae6f6dad2ed Takashi Iwai 2023-05-23 1006 is_ump = rawmidi_is_ump(rmidi); 127ae6f6dad2ed Takashi Iwai 2023-05-23 1007 if (find_ump == is_ump) ^1da177e4c3f41 Linus Torvalds 2005-04-16 1008 break; ^1da177e4c3f41 Linus Torvalds 2005-04-16 1009 } ^1da177e4c3f41 Linus Torvalds 2005-04-16 1010 if (device == SNDRV_RAWMIDI_DEVICES) ^1da177e4c3f41 Linus Torvalds 2005-04-16 1011 device = -1; 127ae6f6dad2ed Takashi Iwai 2023-05-23 @1012 if (put_user(device, argp)) ^1da177e4c3f41 Linus Torvalds 2005-04-16 1013 return -EFAULT; ^1da177e4c3f41 Linus Torvalds 2005-04-16 1014 return 0; ^1da177e4c3f41 Linus Torvalds 2005-04-16 1015 } 127ae6f6dad2ed Takashi Iwai 2023-05-23 1016 :::::: The code at line 1012 was first introduced by commit :::::: 127ae6f6dad2edb2201e27b7e6fa72994b537fad ALSA: rawmidi: Skip UMP devices at SNDRV_CTL_IOCTL_RAWMIDI_NEXT_DEVICE :::::: TO: Takashi Iwai <tiwai(a)suse.de> :::::: CC: Takashi Iwai <tiwai(a)suse.de> -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki

1 0