October 2024 - Alsa-devel - mailman.alsa-project.org

[PATCH 0/8] ASoC: cleasnup rtd and its ID
by Kuninori Morimoto 05 Nov '24

05 Nov '24

Hi Mark rtd has own ID, but it is naming "num" for it. The naming is confusable. This patch rename it to "id". And many functions request both "rtd" and its "id" as function parameter, but rtd itself has rtd->id. This patch cleanup it. And, Qcom driver want to use irregular rtd ID because of its topology, and thus, soc-core need irregular calculation. I'm not sure why only Qcom needs such calculation, but this patch also cleanup it. But I guess we want to cleanup is not soc-core but Qcom side (?) Kuninori Morimoto (8): ASoC: rename rtd->num to rtd->id ASoC: fsl: switch to use rtd->id from rtd->num ASoC: meson: switch to use rtd->id from rtd->num ASoC: sh: switch to use rtd->id from rtd->num ASoC: generic: switch to use rtd->id from rtd->num ASoC: remove rtd->num ASoC: soc-core: do rtd->id trick at snd_soc_add_pcm_runtime() ASoC: cleanup function parameter for rtd and its id include/sound/soc-dai.h | 5 ++- include/sound/soc.h | 8 ++--- sound/soc/fsl/imx-card.c | 6 ++-- sound/soc/generic/simple-card-utils.c | 10 +++--- sound/soc/meson/axg-card.c | 6 ++-- sound/soc/meson/gx-card.c | 2 +- sound/soc/sh/rcar/core.c | 2 +- sound/soc/soc-compress.c | 9 +++-- sound/soc/soc-core.c | 50 +++++++++++++++------------ sound/soc/soc-dai.c | 4 +-- sound/soc/soc-pcm.c | 16 ++++----- 11 files changed, 60 insertions(+), 58 deletions(-) -- 2.43.0

3 11

[PATCH] ASoC: qcom: x1e80100: Support boards with two speakers
by Krzysztof Kozlowski 05 Nov '24

05 Nov '24

Some Qualcomm X1E laptops have only two speakers. Regardless whether this sound card driver is suitable for them (we could re-use one for some older SoC), we should set reasonable channel map depending on the number of channels, not always 4-speaker setup. This change is necessary for bringing audio support on Lenovo Thinkpad T14s with Qualcomm X1E78100 and only two speakers. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- sound/soc/qcom/x1e80100.c | 40 ++++++++++++++++++++++++++++++++++----- 1 file changed, 35 insertions(+), 5 deletions(-) diff --git a/sound/soc/qcom/x1e80100.c b/sound/soc/qcom/x1e80100.c index 898b5c26bf1e..8eb57fc12f0d 100644 --- a/sound/soc/qcom/x1e80100.c +++ b/sound/soc/qcom/x1e80100.c @@ -95,23 +95,53 @@ static int x1e80100_snd_hw_params(struct snd_pcm_substream *substream, return qcom_snd_sdw_hw_params(substream, params, &data->sruntime[cpu_dai->id]); } +static int x1e80100_snd_hw_map_channels(unsigned int *ch_map, int num) +{ + switch (num) { + case 1: + ch_map[0] = PCM_CHANNEL_FC; + break; + case 2: + ch_map[0] = PCM_CHANNEL_FL; + ch_map[1] = PCM_CHANNEL_FR; + break; + case 3: + ch_map[0] = PCM_CHANNEL_FL; + ch_map[1] = PCM_CHANNEL_FR; + ch_map[2] = PCM_CHANNEL_FC; + break; + case 4: + ch_map[0] = PCM_CHANNEL_FL; + ch_map[1] = PCM_CHANNEL_LB; + ch_map[2] = PCM_CHANNEL_FR; + ch_map[3] = PCM_CHANNEL_RB; + break; + default: + return -EINVAL; + } + + return 0; +} + static int x1e80100_snd_prepare(struct snd_pcm_substream *substream) { struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream); struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0); struct x1e80100_snd_data *data = snd_soc_card_get_drvdata(rtd->card); struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id]; - const unsigned int rx_slot[4] = { PCM_CHANNEL_FL, - PCM_CHANNEL_LB, - PCM_CHANNEL_FR, - PCM_CHANNEL_RB }; + unsigned int channels = substream->runtime->channels; + unsigned int rx_slot[4]; int ret; switch (cpu_dai->id) { case WSA_CODEC_DMA_RX_0: case WSA_CODEC_DMA_RX_1: + ret = x1e80100_snd_hw_map_channels(rx_slot, channels); + if (ret) + return ret; + ret = snd_soc_dai_set_channel_map(cpu_dai, 0, NULL, - ARRAY_SIZE(rx_slot), rx_slot); + channels, rx_slot); if (ret) return ret; break; -- 2.43.0

2 1

[PATCH] ASoC: codecs: ES8326: Reduce pop noise
by Zhang Yi 05 Nov '24

05 Nov '24

We modify the value of ES8326_ANA_MICBIAS to reduce the pop noise Signed-off-by: Zhang Yi <zhangyi(a)everest-semi.com> --- sound/soc/codecs/es8326.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/es8326.c b/sound/soc/codecs/es8326.c index aa3e364827c8..a5603b617688 100755 --- a/sound/soc/codecs/es8326.c +++ b/sound/soc/codecs/es8326.c @@ -616,7 +616,7 @@ static int es8326_mute(struct snd_soc_dai *dai, int mute, int direction) 0x0F, 0x0F); if (es8326->version > ES8326_VERSION_B) { regmap_update_bits(es8326->regmap, ES8326_VMIDSEL, 0x40, 0x40); - regmap_update_bits(es8326->regmap, ES8326_ANA_MICBIAS, 0x70, 0x00); + regmap_update_bits(es8326->regmap, ES8326_ANA_MICBIAS, 0x70, 0x10); } } } else { @@ -1082,7 +1082,7 @@ static void es8326_init(struct snd_soc_component *component) regmap_write(es8326->regmap, ES8326_ADC2_SRC, 0x66); es8326_disable_micbias(es8326->component); if (es8326->version > ES8326_VERSION_B) { - regmap_update_bits(es8326->regmap, ES8326_ANA_MICBIAS, 0x73, 0x03); + regmap_update_bits(es8326->regmap, ES8326_ANA_MICBIAS, 0x73, 0x13); regmap_update_bits(es8326->regmap, ES8326_VMIDSEL, 0x40, 0x40); } -- 2.17.1

1 0

Add support for ASRock X870E Taichi
by GitHub pull_request - opened 31 Oct '24

31 Oct '24

alsa-project/alsa-ucm-conf pull request #457 was opened from julmajustus: Included id 26ce:0a0b to realtek-alc4080 list. USB Audio S/PDIF Output, USB Audio Rear input and USB Audio Front Headphones seems to work now without issues with HiFi 2.0 channels. Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/457 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/457.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Direct MIDI event delivery to ALSA sequencer's hardware port without any connections/subscriptions fails with -ENODEV.
by giedrius＠blokas.io 31 Oct '24

31 Oct '24

Hello, I had written an `aseqsend` utility to send MIDI events from hex strings to ALSA sequencer ports, similar to the -S arg of `amidi`, but I just noticed that while sending events directly to application ALSA Sequencer ports works just fine, trying to send to a hardware MIDI port fails with -19 (-ENODEV). Here's the aseqsend utility code, the highlighted line is the one returning -ENODEV: https://github.com/BlokasLabs/aseqsend/blob/main/aseqsend.c#L173 Here's some sample commands showcasing the problem (I've added a printf with drain result just after the indicated line above locally): https://paste.debian.net/hidden/9690d660/ It shows that in case there's no active subscriptions to the port, the event delivery fails, with no data ever reaching the hardware device. As long as there's at least one subscription to the port, it works ok. I've reproduced this on 5.15.36-rt41-v7+ and 6.6.58-v8-16k (running on Raspberry Pi, based on https://github.com/raspberrypi/linux) I've traced the -ENODEV to be returned at this location: https://elixir.bootlin.com/linux/v6.6.58/source/sound/core/seq/seq_midi.c#L… Whenever there's a subscription, the 'substream' is not NULL. But what I would naturally expect is for the events to get delivered to the hardware port when using direct addressing, regardless of its subscription status, the same way how it's possible to send events to application aseq ports: -- Terminal 1 -- patch@patchbox:~ $ aseqdump Waiting for data at port 128:0. Press Ctrl+C to end. Source Event Ch Data 129:0 Note on 0, note 64, velocity 48 -- Terminal 2 -- patch@patchbox:~/work/aseqsend $ ./aseqsend 128:0 90 40 30 drain: 0 Is this a bug in ALSA Sequencer, or is my expectation of being able to write directly to a hardware ALSA sequencer port incorrect?

3 3

[PATCH v29 00/33] Introduce QC USB SND audio offloading support
by Wesley Cheng 31 Oct '24

31 Oct '24

Requesting to see if we can get some Acked-By tags, and merge on usb-next. Several Qualcomm based chipsets can support USB audio offloading to a dedicated audio DSP, which can take over issuing transfers to the USB host controller. The intention is to reduce the load on the main processors in the SoC, and allow them to be placed into lower power modes. There are several parts to this design: 1. Adding ASoC binding layer 2. Create a USB backend for Q6DSP 3. Introduce XHCI interrupter support 4. Create vendor ops for the USB SND driver USB | ASoC -------------------------------------------------------------------- | _________________________ | |sm8250 platform card | | |_________________________| | | | | ___V____ ____V____ | |Q6USB | |Q6AFE | | |"codec" | |"cpu" | | |________| |_________| | ^ ^ ^ | | |________| | ___V____ | | |SOC-USB | | ________ ________ | | | |USB SND |<--->|QC offld|<------------>|________| | |(card.c)| | |<---------- | |________| |________|___ | | | ^ ^ | | | ____________V_________ | | | | | |APR/GLINK | __ V_______________V_____ | | | |______________________| |USB SND (endpoint.c) | | | | ^ |_________________________| | | | | ^ | | | ___________V___________ | | | |->|audio DSP | ___________V_____________ | | |_______________________| |XHCI HCD |<- | |_________________________| | Adding ASoC binding layer ========================= soc-usb: Intention is to treat a USB port similar to a headphone jack. The port is always present on the device, but cable/pin status can be enabled/disabled. Expose mechanisms for USB backend ASoC drivers to communicate with USB SND. Create a USB backend for Q6DSP ============================== q6usb: Basic backend driver that will be responsible for maintaining the resources needed to initiate a playback stream using the Q6DSP. Will be the entity that checks to make sure the connected USB audio device supports the requested PCM format. If it does not, the PCM open call will fail, and userspace ALSA can take action accordingly. Introduce XHCI interrupter support ================================== XHCI HCD supports multiple interrupters, which allows for events to be routed to different event rings. This is determined by "Interrupter Target" field specified in Section "6.4.1.1 Normal TRB" of the XHCI specification. Events in the offloading case will be routed to an event ring that is assigned to the audio DSP. Create vendor ops for the USB SND driver ======================================== qc_audio_offload: This particular driver has several components associated with it: - QMI stream request handler - XHCI interrupter and resource management - audio DSP memory management When the audio DSP wants to enable a playback stream, the request is first received by the ASoC platform sound card. Depending on the selected route, ASoC will bring up the individual DAIs in the path. The Q6USB backend DAI will send an AFE port start command (with enabling the USB playback path), and the audio DSP will handle the request accordingly. Part of the AFE USB port start handling will have an exchange of control messages using the QMI protocol. The qc_audio_offload driver will populate the buffer information: - Event ring base address - EP transfer ring base address and pass it along to the audio DSP. All endpoint management will now be handed over to the DSP, and the main processor is not involved in transfers. Overall, implementing this feature will still expose separate sound card and PCM devices for both the platform card and USB audio device: 0 [SM8250MTPWCD938]: sm8250 - SM8250-MTP-WCD9380-WSA8810-VA-D SM8250-MTP-WCD9380-WSA8810-VA-DMIC 1 [Audio ]: USB-Audio - USB Audio Generic USB Audio at usb-xhci-hcd.1.auto-1.4, high speed This is to ensure that userspace ALSA entities can decide which route to take when executing the audio playback. In the above, if card#1 is selected, then USB audio data will take the legacy path over the USB PCM drivers, etc... The current limitation is that the latest USB audio device that is identified will be automatically selected by the Q6USB BE DAI for offloading. Future patches can be added to possibly add for more flexibility, but until the userpace applications can be better defined, having these mechanisms will complicate the overall implementation. USB offload Kcontrols ===================== Part of the vendor offload package will have a mixer driver associated with it (mixer_usb_offload.c). This entity will be responsible for coordinating with SOC USB and the Q6USB backend DAI to fetch information about the sound card and PCM device indices associated with the offload path. The logic is done based on the current implementation of how paths are controlled within the QC ASoC implementation. QC ASoC Q6Routing ----------------- Within the Q6 ASOC design, the registered ASoC platform card will expose a set of kcontrols for enabling the BE DAI links to the FE DAI link. For example: tinymix -D 0 contents Number of controls: 1033 ctl type num name value ... 1025 BOOL 1 USB Mixer MultiMedia1 Off 1026 BOOL 1 USB Mixer MultiMedia2 Off 1027 BOOL 1 USB Mixer MultiMedia3 Off 1028 BOOL 1 USB Mixer MultiMedia4 Off 1029 BOOL 1 USB Mixer MultiMedia5 Off 1030 BOOL 1 USB Mixer MultiMedia6 Off 1031 BOOL 1 USB Mixer MultiMedia7 Off 1032 BOOL 1 USB Mixer MultiMedia8 Off Each of these kcontrols will enable the USB BE DAI link (q6usb) to be connected to a FE DAI link (q6asm). Since each of these controls are DAPM widgets, when it is enabled, the DAPM widget's "connect" flag is updated accordingly. USB Offload Mapping ------------------- Based on the Q6routing, the USB BE DAI link can determine which sound card and PCM device is enabled for offloading. Fetching the ASoC platform sound card's information is fairly straightforward, and the bulk of the work goes to finding the corresponding PCM device index. As mentioned above, the USB BE DAI can traverse the DAPM widgets to find the DAPM path that is related to the control for the "USB Mixer." Based on which "USB Mixer" is enabled, it can find the corresponding DAPM widget associated w/ the FE DAI link (Multimedia*). From there it can find the PCM device created for the Multimedia* stream. Only one BE DAI link can be enabled per FE DAI. For example, if the HDMI path is enabled for Multimedia1, the USB Mixer will be disabled and switched over. Examples of kcontrol -------------------- tinymix -D 0 contents Number of controls: 1033 ctl type num name ... 1025 BOOL 1 USB Mixer MultiMedia1 Off 1026 BOOL 1 USB Mixer MultiMedia2 On 1027 BOOL 1 USB Mixer MultiMedia3 Off 1028 BOOL 1 USB Mixer MultiMedia4 Off 1029 BOOL 1 USB Mixer MultiMedia5 Off 1030 BOOL 1 USB Mixer MultiMedia6 Off 1031 BOOL 1 USB Mixer MultiMedia7 Off 1032 BOOL 1 USB Mixer MultiMedia8 Off tinymix -D 2 contents Number of controls: 7 ctl type num name value 0 INT 2 Playback Channel Map 0, 0 (range 0->36) 1 BOOL 2 MDR-1ADAC Playback Switch On, On 2 BOOL 1 MDR-1ADAC Playback Switch On 3 INT 2 MDR-1ADAC Playback Volume 127, 127 (range 0->127) 4 INT 1 MDR-1ADAC Playback Volume 127 (range 0->127) 5 BOOL 1 Sony Internal Clock Validity On 6 INT 2 USB Offload Playback Route PCM#0 0, 1 (range -1->255) The example highlights that the userspace/application can utilize the offload path for the USB device on card#0 PCM device#1. When dealing with multiple USB audio devices, only the latest USB device identified is going to be selected for offload capable. tinymix -D 1 contents Number of controls: 9 ctl type num name value 0 INT 2 Capture Channel Map 0, 0 (range 0->36) 1 INT 2 Playback Channel Map 0, 0 (range 0->36) 2 BOOL 1 Headset Capture Switch On 3 INT 1 Headset Capture Volume 1 (range 0->4) 4 BOOL 1 Sidetone Playback Switch On 5 INT 1 Sidetone Playback Volume 4096 (range 0->8192) 6 BOOL 1 Headset Playback Switch On 7 INT 2 Headset Playback Volume 20, 20 (range 0->24) 8 INT 2 USB Offload Playback Route PCM#0 -1, -1 (range -1->255) "-1, -1" shows that this device has no route to the offload path. This feature was validated using: - tinymix: set/enable the multimedia path to route to USB backend - tinyplay: issue playback on platform card Changelog -------------------------------------------- Changes in v29: - Fixed some phrases/wording within the SOC USB documentation, and also added an output with aplay -l for the example output. - Fixed allocated string buffer for creating the USB SND offload mixer, and added a PCM index check to ensure that the pcm index is less than the expected number. - Added a complement enable jack call if USB backend DAI link drivers need access to it. Changes in v28: - Updated comments and commit log in the stop endpoint sync patch. Clarified that the default stop endpoint completion routine won't fully run as expected since it has a completion associated w/ the command. - Added a null check for sb->xhci within xhci_sideband_create_interrupter(). This is to just ensure that caller has registered sideband before calling create interrupter. Changes in v27: - Added some comments and notes about the offload design. Enforcing the q6routing to only allow one USB mixer (PCM device) to be enabled at a time. - Modified SND_JACK_USB notifications for all USB audio offloadable devices plugged in - Rebased on latest XHCI secondary interrupter IMOD changes upstream. Modified the change in this series to allow for XHCI sideband to set the IMOD for sideband clients. - Updated documentation on how USB SND kcontrols are involved in the overall design. - Remove mutex locking from suspend/resume platform ops, as USB core ensures that the interface and device are in the RPM_ACTIVE state while disconnect is handled. Changes in v26: - Cleaned up drivers based on errors from checkpatch - Fixed several typos using codespell - Removed any vendor specific notation from USB SND offload mixer patch Changes in v25: - Cleanups on typos mentioned within the xHCI layers - Modified the xHCI interrupter search if clients specify interrupter index - Moved mixer_usb_offload into its own module, so that other vendor offload USB modules can utilize it also. - Added support for USB audio devices that may have multiple PCM streams, as previous implementation only assumed a single PCM device. SOC USB will be able to handle an array of PCM indexes supported by the USB audio device. - Added some additional checks in the QC USB offload driver to check that device has at least one playback stream before allowing to bind - Reordered DT bindings to fix the error found by Rob's bot. The patch that added USB_RX was after the example was updated. - Updated comments within SOC USB to clarify terminology and to keep it consistent - Added SND_USB_JACK type for notifying of USB device audio connections Changes in v24: - Simplified the kcontrols involved in determining how to utilize the offload path. - There is one kcontrol registered to each USB audio device that will output which card/pcm device it is mapped to for the offload route. - Removed kcontrols to track offload status and device selection. - Default to last USB audio device plugged in as offload capable. - kcontrol will reside on USB SND device. - Reworked the tracking of connected USB devices from the Q6USB BE DAI link. Previously, it was convoluted by doing it over an array, but moved to using a list made it much simpler. Logic is still unchanged in that the last USB headset plugged in will be selected for offloading. - Updated the USB SOC RST documentation accordingly with new kcontrol updates. - Added logic to fetch mapped ASoC card and pcm device index that the offload path is mapped to for the USB SND kcontrol (for offload route). - Re-ordered series to hopefully make reviews more readable by combining patches based on the layer modified (ie QC ASoC, ASoC, USB sound, and USB XHCI). Changes in v23: - Added MODULE_DESCRIPTION() fields to drivers that needed it. Changes in v22: - Removed components tag for the ASoC platform card, as the USB SND kcontrol for notifying userspace of offload capable card achieves similar results. - Due to the above, had to remove the review-by tag for the RST documentation, as changes were made to remove the components tag section. - Took in feedback to make the SOC USB add/remove ports void. - Fixed an issue w/ the USB SND kcontrol management for devices that have multi UAC interfaces. (would attempt to create the kcontrol more than once) - Modified SOC USB card and PCM index select to be based off the num_supported streams that is specified by the USB BE DAI. - Modified comments on selecting the latest USB headset for offloading. Changes in v21: - Added an offload jack disable path from the ASoC platform driver and SOC USB. - Refactored some of the existing SOC USB context look up APIs and created some new helpers to search for the USB context. - Renamed snd_soc_usb_find_format to snd_soc_usb_find_supported_format - Removed some XHCI sideband calls that would allow clients to actually enable the IRQ line associated w/ the secondary interrupter. This is removed because there are other dependencies that are required for that to happen, which are not covered as part of this series, and to avoid confusion. - Due to the above, removed the need to export IMOD setting, and enable/disable interrupter APIs. Changes in v20: - Fixed up some formatting changes pointed out in the usb.rst - Added SB null check during XHCI sideband unregister in case caller passes improper argument (xhci_sideband_unregister()) Changes in v19: - Rebased to usb-next to account for some new changes in dependent drivers. Changes in v18: - Rebased to usb-next, which merged in part of the series. Removed these patches. - Reworked Kconfigs for the ASoC USB related components from QCOM Q6DSP drivers to keep dependencies in place for SoC USB and USB SND. - Removed the repurposing of the stop ep sync API into existing XHCI operations. This will be solely used by the XHCI sideband for now. Changes in v17: - Fixed an issue where one patch was squashed into another. - Re-added some kconfig checks for helpers exposed in USB SND for the soc usb driver, after running different kconfigs. Changes in v16: - Modified some code layer dependencies so that soc usb can be split as a separate module. - Split the kcontrols from ASoC QCOM common layer into a separate driver - Reworked SOC USB kcontrols for controlling card + pcm offload routing and status so that there are individual controls for card and pcm devices. - Added a kcontrol remove API in SOC USB to remove the controls on the fly. This required to add some kcontrol management to SOC USB. - Removed the disconnect work and workqueue for the QC USB offload as it is not required, since QMI interface driver ensures events are handled in its own WQ. Changes in v15: - Removed some already merged XHCI changes - Separated SOC USB driver from being always compiled into SOC core. Now configurable from kconfig. - Fixed up ASoC kcontrol naming to fit guidelines. - Removed some unnecessary dummy ifdefs. - Moved usb snd offload capable kcontrol to be initialized by the platform offloading driver. Changes in v14: - Cleaned up some USB SND related feedback: - Renamed SNDUSB OFFLD playback available --> USB offload capable card - Fixed locking while checking if stream is in use - Replaced some mutex pairs with guard(mutex) Changes in v13: - Pulled in secondary/primary interrupter rework from Mathias from: https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/drivers… - Did some cleanup and commit message updates, and tested on current code base. - Added mutex locking to xhci sideband to help prevent any race conditions, esp. for when accessing shared references. - Addressed concerns from Hillf about gfp_flags and locking used in qc_usb_audio_offload. - Rebased onto usb-next Changes in v12: - Updated copyright year to 2024. Happy new years! - Fixed newline format on mixer offload driver. Changes in v11: - Modified QMI format structures to be const Changes in v10: - Added new mixer for exposing kcontrol for sound card created by USB SND. This allows for applications to know which platform sound card has offload support. Will return the card number. - Broke down and cleaned up some functions/APIs within qc_audio_offload driver. - Exported xhci_initialize_ring_info(), and modified XHCI makefile to allow for the XHCI sideband to exist as a module. - Reworked the jack registration and moved it to the QCOM platform card driver, ie sm8250. - Added an SOC USB API to fetch a standard component tag that can be appended to the platform sound card. Added this tag to sm8250 if any USB path exists within the DT node. - Moved kcontrols that existed in the Q6USB driver, and made it a bit more generic, so that naming can be standardized across solutions. SOC USB is now responsible for creation of these kcontrols. - Added a SOC USB RST document explaining some code flows and implementation details so that other vendors can utilize the framework. - Addressed a case where USB device connection events are lost if usb offload driver (qc_audio_offload) is not probed when everything else has been initialized, ie USB SND, SOC USB and ASoC sound card. Add a rediscover device call during module init, to ensure that connection events will be propagated. - Rebased to usb-next. Changes in v9: - Fixed the dt binding check issue with regards to num-hc-interrupters. Changes in v8: - Cleaned up snd_soc_usb_find_priv_data() based on Mark's feedback. Removed some of the duplicate looping code that was present on previous patches. Also renamed the API. - Integrated Mathias' suggestions on his new sideband changes: https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/?h=feat… - Addressed some of Mathias' fixme tags, such as: - Resetting transfer ring dequeue/enqueue pointers - Issuing stop endpoint command during ep removal - Reset ERDP properly to first segment ring during interrupter removal. (this is currently just being cleared to 0, but should be pointing to a valid segment if controller is still running. Changes in v7: - Fixed dt check error for q6usb bindings - Updated q6usb property from qcom,usb-audio-intr-num --> qcom,usb-audio-intr-idx - Removed separate DWC3 HC interrupters num property, and place limits to XHCI one. - Modified xhci_ring_to_sgtable() to use assigned IOVA/DMA address to fetch pages, as it is not ensured event ring allocated is always done in the vmalloc range. Changes in v6: - Fixed limits and description on several DT bindings (XHCI and Q6USB) - Fixed patch subjects to follow other ALSA/ASoC notations. USB SND - Addressed devices which expose multiple audio (UAC) interfaces. These devices will create a single USB sound card with multiple audio streams, and receive multiple interface probe routines. QC offload was not properly considering cases with multiple probe calls. - Renamed offload module name and kconfig to fit within the SND domain. - Renamed attach/detach endpoint API to keep the hw_params notation. Changes in v5: - Removed some unnecessary files that were included - Fixed some typos mentioned - Addressed dt-binding issues and added hc-interrupters definition to usb-xhci.yaml XHCI: - Moved secondary skip events API to xhci-ring and updated implementation - Utilized existing XHCI APIs, such as inc_deq and xhci_update_erst_dequeue() USB SND - Renamed and reworked the APIs in "sound: usb: Export USB SND APIs for modules" patch to include suggestions to utilize snd_usb_hw_params/free and to avoid generic naming. - Added a resume_cb() op for completion sake. - Addressed some locking concerns with regards to when registering for platform hooks. - Added routine to disconnect all offloaded devices during module unbind. ASoC - Replaced individual PCM parameter arguments in snd_soc_usb_connect() with new snd_soc_usb_device structure to pass along PCM info. - Modified snd_jack set report to notify HEADPHONE event, as we do not support record path. Changes in v4: - Rebased to xhci/for-usb-next - Addressed some dt-bindings comments XHCI: - Pulled in latest changes from Mathias' feature_interrupters branch: https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/?h=feat… - Fixed commit text and signage for the XHCI sideband/interrupter related changes - Added some logic to address the FIXME tags mentioned throughout the commits, such as handling multi segment rings and building the SGT, locking concerns, and ep cleanup operations. - Removed some fixme tags for conditions that may not be needed/addressed. - Repurposed the new endpoint stop sync API to be utilized in other places. - Fixed potential compile issue if XHCI sideband config is not defined. ASoC: - Added sound jack control into the Q6USB driver. Allows for userspsace to know when an offload capable device is connected. USB SND: - Avoided exporting _snd_pcm_hw_param_set based on Takashi's recommendation. - Split USB QMI packet header definitions into a separate commit. This is used to properly allow the QMI interface driver to parse and route QMI packets accordingly - Added a "depends on" entry when enabling QC audio offload to avoid compile time issues. Changes in v3: - Changed prefix from RFC to PATCH - Rebased entire series to usb-next - Updated copyright years XHCI: - Rebased changes on top of XHCI changes merged into usb-next, and only added changes that were still under discussion. - Added change to read in the "num-hc-interrupters" device property. ASoC: - qusb6 USB backend - Incorporated suggestions to fetch iommu information with existing APIs - Added two new sound kcontrols to fetch offload status and offload device selection. - offload status - will return the card and pcm device in use tinymix -D 0 get 1 --> 1, 0 (offload in progress on card#1 pcm#0) - device selection - set the card and pcm device to enable offload on. Ex.: tinymix -D 0 set 1 2 0 --> sets offload on card#2 pcm#0 (this should be the USB card) USB SND: - Fixed up some locking related concerns for registering platform ops. - Moved callbacks under the register_mutex, so that - Modified APIs to properly pass more information about the USB SND device, so that the Q6USB backend can build a device list/map, in order to monitor offload status and device selection. Changes in v2: XHCI: - Replaced XHCI and HCD changes with Mathias' XHCI interrupter changes in his tree: https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/?h=feat… Adjustments made to Mathias' changes: - Created xhci-intr.h to export/expose interrupter APIs versus exposing xhci.h. Moved dependent structures to this file as well. (so clients can parse out information from "struct xhci_interrupter") - Added some basic locking when requesting interrupters. - Fixed up some sanity checks. - Removed clearing of the ERSTBA during freeing of the interrupter. (pending issue where SMMU fault occurs if DMA addr returned is 64b - TODO) - Clean up pending events in the XHCI secondary interrupter. While testing USB bus suspend, it was seen that on bus resume, the xHCI HC would run into a command timeout. - Added offloading APIs to xHCI to fetch transfer and event ring information. ASoC: - Modified soc-usb to allow for multiple USB port additions. For this to work, the USB offload driver has to have a reference to the USB backend by adding a "usb-soc-be" DT entry to the device saved into XHCI sysdev. - Created separate dt-bindings for defining USB_RX port. - Increased APR timeout to accommodate the situation where the AFE port start command could be delayed due to having to issue a USB bus resume while handling the QMI stream start command. Mathias Nyman (3): xhci: support setting interrupt moderation IMOD for secondary interrupters xhci: add helper to stop endpoint and wait for completion xhci: sideband: add initial api to register a sideband entity Wesley Cheng (30): usb: host: xhci: Repurpose event handler for skipping interrupter events usb: xhci: xhci-sideband: Set IMOD for xHCI sideband clients usb: host: xhci-mem: Cleanup pending secondary event ring events usb: host: xhci-mem: Allow for interrupter clients to choose specific index usb: host: xhci-plat: Set XHCI max interrupters if property is present usb: dwc3: Specify maximum number of XHCI interrupters ALSA: Add USB audio device jack type ALSA: usb-audio: Export USB SND APIs for modules ALSA: usb-audio: Check for support for requested audio format ALSA: usb-audio: Save UAC sample size information ALSA: usb-audio: Prevent starting of audio stream if in use ASoC: Add SOC USB APIs for adding an USB backend ASoC: usb: Add PCM format check API for USB backend ASoC: usb: Create SOC USB SND jack kcontrol ASoC: usb: Fetch ASoC card and pcm device information ASoC: doc: Add documentation for SOC USB ASoC: dt-bindings: qcom,q6dsp-lpass-ports: Add USB_RX port ASoC: dt-bindings: Update example for enabling USB offload on SM8250 ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp ASoC: qcom: qdsp6: q6afe: Increase APR timeout ASoC: qcom: qdsp6: Add USB backend ASoC driver for Q6 ASoC: qcom: qdsp6: Add headphone jack for offload connection status ASoC: qcom: qdsp6: Fetch USB offload mapped card and PCM device ALSA: usb-audio: Introduce USB SND platform op callbacks ALSA: usb-audio: qcom: Add USB QMI definitions ALSA: usb-audio: qcom: Introduce QC USB SND offloading support ALSA: usb-audio: qcom: Don't allow USB offload path if PCM device is in use ALSA: usb-audio: Add USB offload route kcontrol ALSA: usb-audio: Allow for rediscovery of connected USB SND devices ASoC: usb: Rediscover USB SND devices on USB port add .../bindings/sound/qcom,sm8250.yaml | 15 + Documentation/sound/soc/index.rst | 1 + Documentation/sound/soc/usb.rst | 491 ++++ drivers/usb/dwc3/core.c | 12 + drivers/usb/dwc3/core.h | 2 + drivers/usb/dwc3/host.c | 3 + drivers/usb/host/Kconfig | 9 + drivers/usb/host/Makefile | 2 + drivers/usb/host/xhci-mem.c | 37 +- drivers/usb/host/xhci-plat.c | 2 + drivers/usb/host/xhci-ring.c | 54 +- drivers/usb/host/xhci-sideband.c | 425 ++++ drivers/usb/host/xhci.c | 51 +- drivers/usb/host/xhci.h | 19 +- .../sound/qcom,q6dsp-lpass-ports.h | 1 + include/linux/mod_devicetable.h | 2 +- include/linux/usb/xhci-sideband.h | 70 + include/sound/jack.h | 4 +- include/sound/q6usboffload.h | 20 + include/sound/soc-usb.h | 147 ++ include/uapi/linux/input-event-codes.h | 3 +- sound/core/jack.c | 6 +- sound/soc/Kconfig | 10 + sound/soc/Makefile | 2 + sound/soc/qcom/Kconfig | 15 + sound/soc/qcom/Makefile | 2 + sound/soc/qcom/qdsp6/Makefile | 1 + sound/soc/qcom/qdsp6/q6afe-dai.c | 60 + sound/soc/qcom/qdsp6/q6afe.c | 194 +- sound/soc/qcom/qdsp6/q6afe.h | 36 +- sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c | 23 + sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h | 1 + sound/soc/qcom/qdsp6/q6routing.c | 32 +- sound/soc/qcom/qdsp6/q6usb.c | 391 ++++ sound/soc/qcom/sm8250.c | 24 +- sound/soc/qcom/usb_offload_utils.c | 56 + sound/soc/qcom/usb_offload_utils.h | 30 + sound/soc/soc-usb.c | 369 +++ sound/usb/Kconfig | 25 + sound/usb/Makefile | 4 +- sound/usb/card.c | 106 + sound/usb/card.h | 17 + sound/usb/endpoint.c | 1 + sound/usb/format.c | 1 + sound/usb/helper.c | 1 + sound/usb/mixer_usb_offload.c | 102 + sound/usb/mixer_usb_offload.h | 17 + sound/usb/pcm.c | 104 +- sound/usb/pcm.h | 11 + sound/usb/qcom/Makefile | 2 + sound/usb/qcom/qc_audio_offload.c | 1974 +++++++++++++++++ sound/usb/qcom/usb_audio_qmi_v01.c | 863 +++++++ sound/usb/qcom/usb_audio_qmi_v01.h | 164 ++ 53 files changed, 5957 insertions(+), 57 deletions(-) create mode 100644 Documentation/sound/soc/usb.rst create mode 100644 drivers/usb/host/xhci-sideband.c create mode 100644 include/linux/usb/xhci-sideband.h create mode 100644 include/sound/q6usboffload.h create mode 100644 include/sound/soc-usb.h create mode 100644 sound/soc/qcom/qdsp6/q6usb.c create mode 100644 sound/soc/qcom/usb_offload_utils.c create mode 100644 sound/soc/qcom/usb_offload_utils.h create mode 100644 sound/soc/soc-usb.c create mode 100644 sound/usb/mixer_usb_offload.c create mode 100644 sound/usb/mixer_usb_offload.h create mode 100644 sound/usb/qcom/Makefile create mode 100644 sound/usb/qcom/qc_audio_offload.c create mode 100644 sound/usb/qcom/usb_audio_qmi_v01.c create mode 100644 sound/usb/qcom/usb_audio_qmi_v01.h

5 44

[GIT PULL] ASoC fixes for v6.12-rc5
by Mark Brown 30 Oct '24

30 Oct '24

The following changes since commit db7e59e6a39a4d3d54ca8197c796557e6d480b0d: ASoC: qcom: sc7280: Fix missing Soundwire runtime stream alloc (2024-10-22 21:00:38 +0100) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git tags/asoc-fix-v6.12-rc5 for you to fetch changes up to 2db63e92186d7201ee1cb2f5af11757c5e5a1020: wcd937x codec fixes (2024-10-29 19:18:48 +0000) ---------------------------------------------------------------- ASoC: Fixes for v6.12 The biggest set of changes here is Hans' fixes and quirks for various Baytrail based platforms with RT5640 CODECs, and there's one core fix for a missed length assignment for __counted_by() checking. Otherwise it's small device specific fixes, several of them in the DT bindings. ---------------------------------------------------------------- Aleksei Vetrov (1): ASoC: dapm: fix bounds checker error in dapm_widget_list_create Alexey Klimov (2): ASoC: codecs: wcd937x: add missing LO Switch control ASoC: codecs: wcd937x: relax the AUX PDM watchdog Christophe JAILLET (1): ASoC: cs42l51: Fix some error handling paths in cs42l51_probe() Dmitry Yashin (1): ASoC: dt-bindings: rockchip,rk3308-codec: add port property Hans de Goede (5): ASoC: codecs: rt5640: Always disable IRQs from rt5640_cancel_work() ASoC: Intel: bytcr_rt5640: Add support for non ACPI instantiated codec ASoC: Intel: bytcr_rt5640: Add DMI quirk for Vexia Edu Atla 10 tablet ASoC: Intel: sst: Support LPE0F28 ACPI HID ASoC: Intel: sst: Fix used of uninitialized ctx to log an error Mark Brown (1): wcd937x codec fixes .../bindings/sound/rockchip,rk3308-codec.yaml | 4 ++ sound/hda/intel-dsp-config.c | 4 ++ sound/soc/codecs/cs42l51.c | 7 ++- sound/soc/codecs/rt5640.c | 27 +++++---- sound/soc/codecs/wcd937x.c | 12 +++- sound/soc/codecs/wcd937x.h | 4 ++ sound/soc/intel/atom/sst/sst_acpi.c | 64 +++++++++++++++++++--- sound/soc/intel/boards/bytcr_rt5640.c | 48 +++++++++++++++- sound/soc/soc-dapm.c | 2 + 9 files changed, 144 insertions(+), 28 deletions(-)

2 1

Why Choose a Dedicated Server for Your Business?
by David Menk 29 Oct '24

29 Oct '24

Hello everyone, I wanted to share some insights on why dedicated server hosting can be a game-changer for businesses, especially those with high-traffic websites or specific performance needs. What is a Dedicated Server? A dedicated server is a physical server that's exclusively used by one client. Unlike shared hosting, where resources are split between multiple users, a dedicated server gives you complete control over CPU, RAM, storage, and bandwidth, making it ideal for websites or applications that need consistent performance, security, and reliability. Benefits of Using a Dedicated Server: Performance and Speed: With dedicated resources, your website or application can handle high volumes of traffic without slowing down. This is especially important for e-commerce sites or any business where speed impacts the user experience. Enhanced Security: Dedicated servers offer stronger security, as you're not sharing the server with other users. You can implement custom security measures tailored to your business, helping to protect against potential breaches and data loss. Full Control and Customization: Since the server is dedicated to you, you have complete control over the operating system, software, and applications you want to run. This level of customization can be essential for companies with specific software requirements. Scalability: As your business grows, dedicated servers can be upgraded with additional resources to meet your increasing demands, providing flexibility without the need to migrate to another server. Better Reliability: Dedicated servers are less prone to outages or downtime compared to shared hosting, providing a stable environment that’s crucial for businesses that rely on 24/7 availability. Is a Dedicated Server Right for You? If your website or application has high traffic, complex applications, or sensitive data, a dedicated server could be the right choice. It's a bit more of an investment, but the control, performance, and reliability often pay off in the long run. If anyone has experience with dedicated servers or is considering making the switch, I’d love to hear your thoughts and any advice you might have! Looking forward to the discussion!

1 1

[PATCH] ALSA: usb-audio: Add Pioneer DJ/AlphaTheta DJM-A9 Mixer
by Sarah Grant 29 Oct '24

29 Oct '24

This also includes a change to the capture level as they differ with this device, as well as additional values for prefader channels. Acked-by: Olivia Mackintosh <livvy(a)base.nu> Signed-off-by: Sarah Grant <s(a)srd.tw> --- sound/usb/mixer_quirks.c | 68 +++++++++++++++++++++++++++++++++++++--- sound/usb/quirks-table.h | 57 +++++++++++++++++++++++++++++++++ 2 files changed, 121 insertions(+), 4 deletions(-) diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index 2a9594f34dac..15c300eddf53 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -3498,7 +3498,7 @@ static int snd_rme_digiface_controls_create(struct usb_mixer_interface *mixer) } /* - * Pioneer DJ DJM Mixers + * Pioneer DJ / AlphaTheta DJM Mixers * * These devices generally have options for soft-switching the playback and * capture sources in addition to the recording level. Although different @@ -3515,17 +3515,23 @@ static int snd_rme_digiface_controls_create(struct usb_mixer_interface *mixer) #define SND_DJM_CAP_CDLINE 0x01 #define SND_DJM_CAP_DIGITAL 0x02 #define SND_DJM_CAP_PHONO 0x03 +#define SND_DJM_CAP_PREFADER 0x05 #define SND_DJM_CAP_PFADER 0x06 #define SND_DJM_CAP_XFADERA 0x07 #define SND_DJM_CAP_XFADERB 0x08 #define SND_DJM_CAP_MIC 0x09 #define SND_DJM_CAP_AUX 0x0d #define SND_DJM_CAP_RECOUT 0x0a +#define SND_DJM_CAP_RECOUT_NOMIC 0x0e #define SND_DJM_CAP_NONE 0x0f #define SND_DJM_CAP_CH1PFADER 0x11 #define SND_DJM_CAP_CH2PFADER 0x12 #define SND_DJM_CAP_CH3PFADER 0x13 #define SND_DJM_CAP_CH4PFADER 0x14 +#define SND_DJM_CAP_CH1PREFADER 0x31 +#define SND_DJM_CAP_CH2PREFADER 0x32 +#define SND_DJM_CAP_CH3PREFADER 0x33 +#define SND_DJM_CAP_CH4PREFADER 0x34 // Playback types #define SND_DJM_PB_CH1 0x00 @@ -3551,6 +3557,7 @@ static int snd_rme_digiface_controls_create(struct usb_mixer_interface *mixer) #define SND_DJM_900NXS2_IDX 0x3 #define SND_DJM_750MK2_IDX 0x4 #define SND_DJM_450_IDX 0x5 +#define SND_DJM_A9_IDX 0x6 #define SND_DJM_CTL(_name, suffix, _default_value, _windex) { \ @@ -3579,7 +3586,7 @@ struct snd_djm_ctl { u16 wIndex; }; -static const char *snd_djm_get_label_caplevel(u16 wvalue) +static const char *snd_djm_get_label_caplevel_common(u16 wvalue) { switch (wvalue) { case 0x0000: return "-19dB"; @@ -3590,6 +3597,20 @@ static const char *snd_djm_get_label_caplevel(u16 wvalue) } }; +// The DJM-A9 has different capture levels than other, older models +static const char *snd_djm_get_label_caplevel_a9(u16 wvalue) +{ + switch (wvalue) { + case 0x0000: return "+15dB"; + case 0x0100: return "+12dB"; + case 0x0200: return "+9dB"; + case 0x0300: return "+6dB"; + case 0x0400: return "+3dB"; + case 0x0500: return "0dB"; + default: return NULL; + } +}; + static const char *snd_djm_get_label_cap_common(u16 wvalue) { switch (wvalue & 0x00ff) { @@ -3602,8 +3623,13 @@ static const char *snd_djm_get_label_cap_common(u16 wvalue) case SND_DJM_CAP_XFADERB: return "Cross Fader B"; case SND_DJM_CAP_MIC: return "Mic"; case SND_DJM_CAP_RECOUT: return "Rec Out"; + case SND_DJM_CAP_RECOUT_NOMIC: return "Rec Out without Mic"; case SND_DJM_CAP_AUX: return "Aux"; case SND_DJM_CAP_NONE: return "None"; + case SND_DJM_CAP_CH1PREFADER: return "Pre Fader Ch1"; + case SND_DJM_CAP_CH2PREFADER: return "Pre Fader Ch2"; + case SND_DJM_CAP_CH3PREFADER: return "Pre Fader Ch3"; + case SND_DJM_CAP_CH4PREFADER: return "Pre Fader Ch4"; case SND_DJM_CAP_CH1PFADER: return "Post Fader Ch1"; case SND_DJM_CAP_CH2PFADER: return "Post Fader Ch2"; case SND_DJM_CAP_CH3PFADER: return "Post Fader Ch3"; @@ -3623,6 +3649,14 @@ static const char *snd_djm_get_label_cap_850(u16 wvalue) } }; +static const char *snd_djm_get_label_caplevel(u8 device_idx, u16 wvalue) +{ + switch (device_idx) { + case SND_DJM_A9_IDX: return snd_djm_get_label_caplevel_a9(wvalue); + default: return snd_djm_get_label_caplevel_common(wvalue); + } +}; + static const char *snd_djm_get_label_cap(u8 device_idx, u16 wvalue) { switch (device_idx) { @@ -3644,7 +3678,7 @@ static const char *snd_djm_get_label_pb(u16 wvalue) static const char *snd_djm_get_label(u8 device_idx, u16 wvalue, u16 windex) { switch (windex) { - case SND_DJM_WINDEX_CAPLVL: return snd_djm_get_label_caplevel(wvalue); + case SND_DJM_WINDEX_CAPLVL: return snd_djm_get_label_caplevel(device_idx, wvalue); case SND_DJM_WINDEX_CAP: return snd_djm_get_label_cap(device_idx, wvalue); case SND_DJM_WINDEX_PB: return snd_djm_get_label_pb(wvalue); default: return NULL; @@ -3653,7 +3687,7 @@ static const char *snd_djm_get_label(u8 device_idx, u16 wvalue, u16 windex) // common DJM capture level option values static const u16 snd_djm_opts_cap_level[] = { - 0x0000, 0x0100, 0x0200, 0x0300 }; + 0x0000, 0x0100, 0x0200, 0x0300, 0x400, 0x500 }; // DJM-250MK2 @@ -3795,6 +3829,28 @@ static const struct snd_djm_ctl snd_djm_ctls_750mk2[] = { }; +// DJM-A9 +static const u16 snd_djm_opts_a9_cap1[] = { + 0x0107, 0x0108, 0x0109, 0x010a, 0x010e, + 0x111, 0x112, 0x113, 0x114, 0x0131, 0x132, 0x133, 0x134 }; +static const u16 snd_djm_opts_a9_cap2[] = { + 0x0201, 0x0202, 0x0203, 0x0205, 0x0206, 0x0207, 0x0208, 0x0209, 0x020a, 0x020e }; +static const u16 snd_djm_opts_a9_cap3[] = { + 0x0301, 0x0302, 0x0303, 0x0305, 0x0306, 0x0307, 0x0308, 0x0309, 0x030a, 0x030e }; +static const u16 snd_djm_opts_a9_cap4[] = { + 0x0401, 0x0402, 0x0403, 0x0405, 0x0406, 0x0407, 0x0408, 0x0409, 0x040a, 0x040e }; +static const u16 snd_djm_opts_a9_cap5[] = { + 0x0501, 0x0502, 0x0503, 0x0505, 0x0506, 0x0507, 0x0508, 0x0509, 0x050a, 0x050e }; + +static const struct snd_djm_ctl snd_djm_ctls_a9[] = { + SND_DJM_CTL("Capture Level", cap_level, 0, SND_DJM_WINDEX_CAPLVL), + SND_DJM_CTL("Master Input", a9_cap1, 3, SND_DJM_WINDEX_CAP), + SND_DJM_CTL("Ch1 Input", a9_cap2, 2, SND_DJM_WINDEX_CAP), + SND_DJM_CTL("Ch2 Input", a9_cap3, 2, SND_DJM_WINDEX_CAP), + SND_DJM_CTL("Ch3 Input", a9_cap4, 2, SND_DJM_WINDEX_CAP), + SND_DJM_CTL("Ch4 Input", a9_cap5, 2, SND_DJM_WINDEX_CAP) +}; + static const struct snd_djm_device snd_djm_devices[] = { [SND_DJM_250MK2_IDX] = SND_DJM_DEVICE(250mk2), [SND_DJM_750_IDX] = SND_DJM_DEVICE(750), @@ -3802,6 +3858,7 @@ static const struct snd_djm_device snd_djm_devices[] = { [SND_DJM_900NXS2_IDX] = SND_DJM_DEVICE(900nxs2), [SND_DJM_750MK2_IDX] = SND_DJM_DEVICE(750mk2), [SND_DJM_450_IDX] = SND_DJM_DEVICE(450), + [SND_DJM_A9_IDX] = SND_DJM_DEVICE(a9), }; @@ -4076,6 +4133,9 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer) case USB_ID(0x2b73, 0x000a): /* Pioneer DJ DJM-900NXS2 */ err = snd_djm_controls_create(mixer, SND_DJM_900NXS2_IDX); break; + case USB_ID(0x2b73, 0x003c): /* Pioneer DJ / AlphaTheta DJM-A9 */ + err = snd_djm_controls_create(mixer, SND_DJM_A9_IDX); + break; } return err; diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 24c981c9b240..b758655b948c 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3119,6 +3119,63 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, +{ + /* + * Pioneer DJ / AlphaTheta DJM-A9 + * 10 channels playback & 12 channels capture @ 44.1/48/96kHz S24LE + */ + USB_DEVICE_VENDOR_SPEC(0x2b73, 0x003c), + QUIRK_DRIVER_INFO { + QUIRK_DATA_COMPOSITE { + { + QUIRK_DATA_AUDIOFORMAT(0) { + .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .channels = 10, + .iface = 0, + .altsetting = 1, + .altset_idx = 1, + .endpoint = 0x01, + .ep_attr = USB_ENDPOINT_XFER_ISOC| + USB_ENDPOINT_SYNC_ASYNC, + .rates = SNDRV_PCM_RATE_44100| + SNDRV_PCM_RATE_48000| + SNDRV_PCM_RATE_96000, + .rate_min = 44100, + .rate_max = 96000, + .nr_rates = 3, + .rate_table = (unsigned int[]) { + 44100, 48000, 96000 + } + } + }, + { + QUIRK_DATA_AUDIOFORMAT(0) { + .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .channels = 12, + .iface = 0, + .altsetting = 1, + .altset_idx = 1, + .endpoint = 0x82, + .ep_idx = 1, + .ep_attr = USB_ENDPOINT_XFER_ISOC| + USB_ENDPOINT_SYNC_ASYNC| + USB_ENDPOINT_USAGE_IMPLICIT_FB, + .rates = SNDRV_PCM_RATE_44100| + SNDRV_PCM_RATE_48000| + SNDRV_PCM_RATE_96000, + .rate_min = 44100, + .rate_max = 96000, + .nr_rates = 3, + .rate_table = (unsigned int[]) { + 44100, 48000, 96000 + } + } + }, + QUIRK_COMPOSITE_END + } + } +}, + /* * MacroSilicon MS2100/MS2106 based AV capture cards * -- 2.40.1

2 1

[PATCH] ALSA: hda/realtek: Add subwoofer quirk for Infinix ZERO BOOK 13
by Piyush Raj Chouhan 29 Oct '24

29 Oct '24

Infinix ZERO BOOK 13 has a 2+2 speaker system which isn't probed correctly. This patch adds a quirk with the proper pin connections. Also The mic in this laptop suffers too high gain resulting in mostly fan noise being recorded, This patch Also limit mic boost. HW Probe for device; https://linux-hardware.org/?probe=a2e892c47b Test: All 4 speaker works, Mic has low noise. Signed-off-by: Piyush Raj Chouhan <piyushchouhan1598(a)gmail.com> --- sound/pci/hda/patch_realtek.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 3567b14b52b7..075935707f8a 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7551,6 +7551,7 @@ enum { ALC290_FIXUP_SUBWOOFER_HSJACK, ALC269_FIXUP_THINKPAD_ACPI, ALC269_FIXUP_DMIC_THINKPAD_ACPI, + ALC269VB_FIXUP_INFINIX_ZERO_BOOK_13, ALC269VB_FIXUP_CHUWI_COREBOOK_XPRO, ALC255_FIXUP_ACER_MIC_NO_PRESENCE, ALC255_FIXUP_ASUS_MIC_NO_PRESENCE, @@ -7996,6 +7997,16 @@ static const struct hda_fixup alc269_fixups[] = { .type = HDA_FIXUP_FUNC, .v.func = alc269_fixup_pincfg_U7x7_headset_mic, }, + [ALC269VB_FIXUP_INFINIX_ZERO_BOOK_13] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + { 0x14, 0x90170151 }, /* use as internal speaker (LFE) */ + { 0x1b, 0x90170152 }, /* use as internal speaker (back) */ + { } + }, + .chained = true, + .chain_id = ALC269_FIXUP_LIMIT_INT_MIC_BOOST + }, [ALC269VB_FIXUP_CHUWI_COREBOOK_XPRO] = { .type = HDA_FIXUP_PINS, .v.pins = (const struct hda_pintbl[]) { @@ -10989,6 +11000,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1d72, 0x1945, "Redmi G", ALC256_FIXUP_ASUS_HEADSET_MIC), SND_PCI_QUIRK(0x1d72, 0x1947, "RedmiBook Air", ALC255_FIXUP_XIAOMI_HEADSET_MIC), SND_PCI_QUIRK(0x2782, 0x0214, "VAIO VJFE-CL", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), + SND_PCI_QUIRK(0x2782, 0x0228, "Infinix ZERO BOOK 13", ALC269VB_FIXUP_INFINIX_ZERO_BOOK_13), SND_PCI_QUIRK(0x2782, 0x0232, "CHUWI CoreBook XPro", ALC269VB_FIXUP_CHUWI_COREBOOK_XPRO), SND_PCI_QUIRK(0x2782, 0x1707, "Vaio VJFE-ADL", ALC298_FIXUP_SPK_VOLUME), SND_PCI_QUIRK(0x8086, 0x2074, "Intel NUC 8", ALC233_FIXUP_INTEL_NUC8_DMIC), -- 2.46.2

2 1