October 2024 - Alsa-devel - mailman.alsa-project.org

Re: [PATCH v3] ASoC: qcom: Fix NULL Dereference in asoc_qcom_lpass_cpu_platform_probe()
by Markus Elfring 07 Oct '24

07 Oct '24

> A devm_kzalloc() in asoc_qcom_lpass_cpu_platform_probe() could call? > possibly return NULL pointer. NULL Pointer Dereference may be Can the term “null pointer dereference” be applied for the final commit message (including the summary phrase)? > triggerred without addtional check. triggered? additional? Regards, Markus

2 1

[PATCH] ASoC: qcom: Fix NULL Dereference in asoc_qcom_lpass_cpu_platform_probe()
by Gax-c 07 Oct '24

07 Oct '24

A devm_kzalloc() in asoc_qcom_lpass_cpu_platform_probe() could possibly return NULL pointer. NULL Pointer Dereference may be triggerred without addtional check. Add a NULL check for the returned pointer. Fixes: b5022a36d28f ("ASoC: qcom: lpass: Use regmap_field for i2sctl and dmactl registers") Signed-off-by: Zichen Xie <zichenxie0106(a)gmail.com> Cc: stable(a)vger.kernel.org --- sound/soc/qcom/lpass-cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c index 5a47f661e0c6..242bc16da36d 100644 --- a/sound/soc/qcom/lpass-cpu.c +++ b/sound/soc/qcom/lpass-cpu.c @@ -1242,6 +1242,8 @@ int asoc_qcom_lpass_cpu_platform_probe(struct platform_device *pdev) /* Allocation for i2sctl regmap fields */ drvdata->i2sctl = devm_kzalloc(&pdev->dev, sizeof(struct lpaif_i2sctl), GFP_KERNEL); + if (!drvdata->i2sctl) + return -ENOMEM; /* Initialize bitfields for dai I2SCTL register */ ret = lpass_cpu_init_i2sctl_bitfields(dev, drvdata->i2sctl, -- 2.25.1

2 2

[PATCH v2 0/7] qrb4210-rb2: add HDMI audio playback support
by Alexey Klimov 06 Oct '24

06 Oct '24

Rebased on top of -master, tested. Changes since v1: -- removed handling of MI2S clock in sm2450_snd_shutdown(): setting clock rate and disabling it causes audio delay on playback start; -- removed empty sound { } node from sm6115.dtsi as suggested by Krzysztof; -- moved lpi_i2s2_active pins description to qrb423310 board-specific file as suggested by Dmitry Baryshkov; -- moved q6asmdai DAIs to apr soc node as suggested by Konrad Dybcio; -- lpass_tlmm is not disabled; -- lpass_tlmm node moved to sm4250.dtsi; -- kept MultiMedia DAIs as is, without them the sound card driver doesn't initialise; -- added some reviewed-by tags. This series still keeps "qcom,qrb4210-rb2-sndcard" for sm8250 soundcard. As per off the list discussion with Srini it was suggested to have it since in future it may be required to add clocks, workarounds, quirks, model-specific things based on this compatible. The same as for RB5 compatible in sm8250 snd driver. This focuses on HDMI audio playback only hence there are no soundwire and dmic pins, for instance. The work to enable playback via wcd+wsa8815 amplifier is in progress (it works) and one of the routes is to merge such two patchsets together. Link to prev series: https://lore.kernel.org/linux-sound/20240628010715.438471-1-alexey.klimov@l… Alexey Klimov (7): ASoC: dt-bindings: qcom,sm8250: add qrb4210-rb2-sndcard ASoC: qcom: sm8250: add qrb4210-rb2-sndcard compatible string ASoC: qcom: sm8250: add handling of secondary MI2S clock arm64: dts: qcom: sm6115: add apr and its services arm64: dts: qcom: sm4250: add LPASS LPI pin controller arm64: dts: qcom: qrb4210-rb2: add description of lpi_i2s2 pins arm64: dts: qcom: qrb4210-rb2: add HDMI audio playback support .../bindings/sound/qcom,sm8250.yaml | 1 + arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 91 +++++++++++++++++++ arch/arm64/boot/dts/qcom/sm4250.dtsi | 16 ++++ arch/arm64/boot/dts/qcom/sm6115.dtsi | 72 +++++++++++++++ sound/soc/qcom/sm8250.c | 9 ++ 5 files changed, 189 insertions(+) -- 2.45.2

5 14

Ubuntu 24.04 microphone is not working USB-Audio: ALC4080 Z-590E
by GitHub issues - edited 05 Oct '24

05 Oct '24

alsa-project/alsa-ucm-conf issue #447 was edited from jiutian12: My rear microphone is not working on Ubuntu 24.04 (nor on Ubuntu 22), but it can be used normally on Windows 10. Can hear sound After updating the master branch, the microphone still doesn't work, but the response is the same as the sound system Initial feedback on the issue, the following is my hardware information, I am not sure if it is complete http://alsa-project.org/db/?f=2558f03ffd8c55e18f8208a806f3e2336d9fa49c Kernel: k6.8.0-45-generic USB-Audio: ALC4080 ROG STRIX Z590-E This command can be recorded, but the sound is very low： arecord -D plughw:1,0 -c 1 -r 16000 -f S16_LE output.wav Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/447 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Ubuntu 24.04 microphone is not working USB-Audio: ALC4080 Z-590E
by GitHub issues - edited 05 Oct '24

05 Oct '24

alsa-project/alsa-ucm-conf issue #447 was edited from jiutian12: My rear microphone is not working on Ubuntu 24.04 (nor on Ubuntu 22), but it can be used normally on Windows 10. Can hear sound After updating the master branch, the microphone still doesn't work, but the response is the same as the sound system Initial feedback on the issue, the following is my hardware information, I am not sure if it is complete http://alsa-project.org/db/?f=2558f03ffd8c55e18f8208a806f3e2336d9fa49c Kernel: k6.8.0-45-generic USB-Audio: ALC4080 ROG STRIX Z590-E Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/447 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Ubuntu 24.04 microphone is not working USB-Audio: ALC4080 Z-590p
by GitHub issues - edited 05 Oct '24

05 Oct '24

alsa-project/alsa-ucm-conf issue #447 was edited from jiutian12: My rear microphone is not working on Ubuntu 24.04 (nor on Ubuntu 22), but it can be used normally on Windows 10. Can hear sound After updating the master branch, the microphone still doesn't work, but the response is the same as the sound system Initial feedback on the issue, the following is my hardware information, I am not sure if it is complete http://alsa-project.org/db/?f=2558f03ffd8c55e18f8208a806f3e2336d9fa49c Kernel: k6.8.0-45-generic USB-Audio: ALC4080 ROG STRIX Z590-E Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/447 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Ubuntu 24.04 microphone is not working USB-Audio: ALC4080 Z-590p
by GitHub issues - opened 05 Oct '24

05 Oct '24

alsa-project/alsa-ucm-conf issue #447 was opened from jiutian12: My rear microphone is not working on Ubuntu 24.04 (nor on Ubuntu 22), but it can be used normally on Windows 10. Can hear sound After updating the master branch, the microphone still doesn't work, but the response is the same as the sound system Initial feedback on the issue, the following is my hardware information, I am not sure if it is complete http://alsa-project.org/db/?f=2558f03ffd8c55e18f8208a806f3e2336d9fa49c Kernel: k6.8.0-45-generic USB-Audio: ALC4080 asus Z-590p Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/447 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH] sound: soc: uniphier: Handle regmap_write errors in aio_src_set_param()
by (학생) 장인규 (컴퓨터공학과) 05 Oct '24

05 Oct '24

From 791716bf359b8540c519810848fd1f8006d7c3c5 Mon Sep 17 00:00:00 2001 From: Ingyu Jang <ingyujang25(a)unist.ac.kr> Date: Thu, 26 Sep 2024 19:40:04 +0900 Subject: [PATCH] sound: soc: uniphier: Handle regmap_write errors in aio_src_set_param() The aio_src_set_param() function did not previously check the return values of regmap_write() and regmap_update_bits(). If these functions fail, it could lead to silent failures when configuring the sample rate converter (SRC), causing improper behavior in audio processing without any indication of an error. This patch modifies aio_src_set_param to check the return values of regmap_write() and regmap_update_bits(). If either function returns an error, the error code is propagated back to the caller to ensure proper error handling. This change aligns with the existing error-handling behavior in functions like uniphier_aio_prepare(), where a failure in a sub-function should result in an immediate return of the error. Signed-off-by: Ingyu Jang <ingyujang25(a)unist.ac.kr> --- sound/soc/uniphier/aio-core.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/sound/soc/uniphier/aio-core.c b/sound/soc/uniphier/aio-core.c index 0eba60758134..2c4e8b873253 100644 --- a/sound/soc/uniphier/aio-core.c +++ b/sound/soc/uniphier/aio-core.c @@ -921,16 +921,19 @@ int aio_src_set_param(struct uniphier_aio_sub *sub, { struct regmap *r = sub->aio->chip->regmap; u32 v; + int ret; if (sub->swm->dir != PORT_DIR_OUTPUT) return 0; - regmap_write(r, OPORTMXSRC1CTR(sub->swm->oport.map), + ret = regmap_write(r, OPORTMXSRC1CTR(sub->swm->oport.map), OPORTMXSRC1CTR_THMODE_SRC | OPORTMXSRC1CTR_SRCPATH_CALC | OPORTMXSRC1CTR_SYNC_ASYNC | OPORTMXSRC1CTR_FSIIPSEL_INNER | OPORTMXSRC1CTR_FSISEL_ACLK); + if (ret) + return ret; switch (params_rate(params)) { default: @@ -951,12 +954,18 @@ int aio_src_set_param(struct uniphier_aio_sub *sub, break; } - regmap_write(r, OPORTMXRATE_I(sub->swm->oport.map), + + ret = regmap_write(r, OPORTMXRATE_I(sub->swm->oport.map), v | OPORTMXRATE_I_ACLKSRC_APLL | OPORTMXRATE_I_LRCKSTP_STOP); - regmap_update_bits(r, OPORTMXRATE_I(sub->swm->oport.map), + if (ret) + return ret; + + ret = regmap_update_bits(r, OPORTMXRATE_I(sub->swm->oport.map), OPORTMXRATE_I_LRCKSTP_MASK, OPORTMXRATE_I_LRCKSTP_START); + if (ret) + return ret; return 0; } -- 2.34.1

2 2

[PATCH] Fix unsigned int compared against 0
by Advait Dhamorikar 05 Oct '24

05 Oct '24

An unsigned value held by offset can never be negative, so this test will always evaluate the same way and is therefore redundant. Signed-off-by: Advait Dhamorikar <advaitdhamorikar(a)gmail.com> --- sound/soc/codecs/tlv320adc3xxx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/tlv320adc3xxx.c b/sound/soc/codecs/tlv320adc3xxx.c index 7073b9d1cda8..868e8a91e05b 100644 --- a/sound/soc/codecs/tlv320adc3xxx.c +++ b/sound/soc/codecs/tlv320adc3xxx.c @@ -961,7 +961,7 @@ static int adc3xxx_gpio_request(struct gpio_chip *chip, unsigned int offset) if (offset >= ADC3XXX_GPIOS_MAX) return -EINVAL; - if (offset >= 0 && offset < ADC3XXX_GPIO_PINS) { + if (offset < ADC3XXX_GPIO_PINS) { /* GPIO1 is offset 0, GPIO2 is offset 1 */ /* We check here that the GPIO pins are either not configured * in the DT, or that they purposely are set as outputs. -- 2.34.1

1 0

[PATCH] ASoC: fsl: fsl_qmc_audio: Remove the logging when parsing channels
by Herve Codina 05 Oct '24

05 Oct '24

On each channel parsing, a log message is issued. This log message is not needed and become annoying when many channels are used (up to 64 channel supported). Simply remove this unneeded log message. Signed-off-by: Herve Codina <herve.codina(a)bootlin.com> --- sound/soc/fsl/fsl_qmc_audio.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/sound/soc/fsl/fsl_qmc_audio.c b/sound/soc/fsl/fsl_qmc_audio.c index 8668abd35208..e257b8adafe0 100644 --- a/sound/soc/fsl/fsl_qmc_audio.c +++ b/sound/soc/fsl/fsl_qmc_audio.c @@ -838,8 +838,6 @@ static int qmc_audio_dai_parse(struct qmc_audio *qmc_audio, struct device_node * qmc_dai->id, i, ret); return ret; } - dev_info(qmc_audio->dev, "dai %d QMC channel %d mode %d, nb_tx_ts %u, nb_rx_ts %u\n", - qmc_dai->id, i, info.mode, info.nb_tx_ts, info.nb_rx_ts); if (info.mode != QMC_TRANSPARENT) { dev_err(qmc_audio->dev, "dai %d QMC chan %d mode %d is not QMC_TRANSPARENT\n", -- 2.46.1

2 1

[PATCH AUTOSEL 6.6 34/58] soundwire: cadence: re-check Peripheral status with delayed_work
by Sasha Levin 04 Oct '24

04 Oct '24

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> [ Upstream commit f8c35d61ba01afa76846905c67862cdace7f66b0 ] The SoundWire peripheral enumeration is entirely based on interrupts, more specifically sticky bits tracking state changes. This patch adds a defensive programming check on the actual status reported in PING frames. If for some reason an interrupt was lost or delayed, the delayed work would detect a peripheral change of status after the bus starts. The 100ms defined for the delay is not completely arbitrary, if a Peripheral didn't join the bus within that delay then probably the hardware link is broken, and conversely if the detection didn't happen because of software issues the 100ms is still acceptable in terms of user experience. The overhead of the one-shot workqueue is minimal, and the mutual exclusion ensures that the interrupt and delayed work cannot update the status concurrently. Reviewed-by: Liam Girdwood <liam.r.girdwood(a)intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Link: https://lore.kernel.org/r/20240805114921.88007-1-yung-chuan.liao@linux.inte… Signed-off-by: Vinod Koul <vkoul(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/soundwire/cadence_master.c | 39 ++++++++++++++++++++++++++-- drivers/soundwire/cadence_master.h | 5 ++++ drivers/soundwire/intel.h | 2 ++ drivers/soundwire/intel_auxdevice.c | 1 + drivers/soundwire/intel_bus_common.c | 11 ++++++++ 5 files changed, 56 insertions(+), 2 deletions(-) diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c index 3e7cf04aaf2a6..e69982dbd449b 100644 --- a/drivers/soundwire/cadence_master.c +++ b/drivers/soundwire/cadence_master.c @@ -891,8 +891,14 @@ static int cdns_update_slave_status(struct sdw_cdns *cdns, } } - if (is_slave) - return sdw_handle_slave_status(&cdns->bus, status); + if (is_slave) { + int ret; + + mutex_lock(&cdns->status_update_lock); + ret = sdw_handle_slave_status(&cdns->bus, status); + mutex_unlock(&cdns->status_update_lock); + return ret; + } return 0; } @@ -989,6 +995,31 @@ irqreturn_t sdw_cdns_irq(int irq, void *dev_id) } EXPORT_SYMBOL(sdw_cdns_irq); +static void cdns_check_attached_status_dwork(struct work_struct *work) +{ + struct sdw_cdns *cdns = + container_of(work, struct sdw_cdns, attach_dwork.work); + enum sdw_slave_status status[SDW_MAX_DEVICES + 1]; + u32 val; + int ret; + int i; + + val = cdns_readl(cdns, CDNS_MCP_SLAVE_STAT); + + for (i = 0; i <= SDW_MAX_DEVICES; i++) { + status[i] = val & 0x3; + if (status[i]) + dev_dbg(cdns->dev, "Peripheral %d status: %d\n", i, status[i]); + val >>= 2; + } + + mutex_lock(&cdns->status_update_lock); + ret = sdw_handle_slave_status(&cdns->bus, status); + mutex_unlock(&cdns->status_update_lock); + if (ret < 0) + dev_err(cdns->dev, "%s: sdw_handle_slave_status failed: %d\n", __func__, ret); +} + /** * cdns_update_slave_status_work - update slave status in a work since we will need to handle * other interrupts eg. CDNS_MCP_INT_RX_WL during the update slave @@ -1745,7 +1776,11 @@ int sdw_cdns_probe(struct sdw_cdns *cdns) init_completion(&cdns->tx_complete); cdns->bus.port_ops = &cdns_port_ops; + mutex_init(&cdns->status_update_lock); + INIT_WORK(&cdns->work, cdns_update_slave_status_work); + INIT_DELAYED_WORK(&cdns->attach_dwork, cdns_check_attached_status_dwork); + return 0; } EXPORT_SYMBOL(sdw_cdns_probe); diff --git a/drivers/soundwire/cadence_master.h b/drivers/soundwire/cadence_master.h index bc84435e420f5..e1d7969ba48ae 100644 --- a/drivers/soundwire/cadence_master.h +++ b/drivers/soundwire/cadence_master.h @@ -117,6 +117,8 @@ struct sdw_cdns_dai_runtime { * @link_up: Link status * @msg_count: Messages sent on bus * @dai_runtime_array: runtime context for each allocated DAI. + * @status_update_lock: protect concurrency between interrupt-based and delayed work + * status update */ struct sdw_cdns { struct device *dev; @@ -148,10 +150,13 @@ struct sdw_cdns { bool interrupt_enabled; struct work_struct work; + struct delayed_work attach_dwork; struct list_head list; struct sdw_cdns_dai_runtime **dai_runtime_array; + + struct mutex status_update_lock; /* add mutual exclusion to sdw_handle_slave_status() */ }; #define bus_to_cdns(_bus) container_of(_bus, struct sdw_cdns, bus) diff --git a/drivers/soundwire/intel.h b/drivers/soundwire/intel.h index 511932c55216c..bb6b1df2d2c20 100644 --- a/drivers/soundwire/intel.h +++ b/drivers/soundwire/intel.h @@ -91,6 +91,8 @@ static inline void intel_writew(void __iomem *base, int offset, u16 value) #define INTEL_MASTER_RESET_ITERATIONS 10 +#define SDW_INTEL_DELAYED_ENUMERATION_MS 100 + #define SDW_INTEL_CHECK_OPS(sdw, cb) ((sdw) && (sdw)->link_res && (sdw)->link_res->hw_ops && \ (sdw)->link_res->hw_ops->cb) #define SDW_INTEL_OPS(sdw, cb) ((sdw)->link_res->hw_ops->cb) diff --git a/drivers/soundwire/intel_auxdevice.c b/drivers/soundwire/intel_auxdevice.c index 93698532deac4..bdfff78ac2f81 100644 --- a/drivers/soundwire/intel_auxdevice.c +++ b/drivers/soundwire/intel_auxdevice.c @@ -398,6 +398,7 @@ static void intel_link_remove(struct auxiliary_device *auxdev) */ if (!bus->prop.hw_disabled) { sdw_intel_debugfs_exit(sdw); + cancel_delayed_work_sync(&cdns->attach_dwork); sdw_cdns_enable_interrupt(cdns, false); } sdw_bus_master_delete(bus); diff --git a/drivers/soundwire/intel_bus_common.c b/drivers/soundwire/intel_bus_common.c index 179aa0d85951b..db9cf211671a3 100644 --- a/drivers/soundwire/intel_bus_common.c +++ b/drivers/soundwire/intel_bus_common.c @@ -60,6 +60,9 @@ int intel_start_bus(struct sdw_intel *sdw) sdw_cdns_check_self_clearing_bits(cdns, __func__, true, INTEL_MASTER_RESET_ITERATIONS); + schedule_delayed_work(&cdns->attach_dwork, + msecs_to_jiffies(SDW_INTEL_DELAYED_ENUMERATION_MS)); + return 0; } @@ -151,6 +154,9 @@ int intel_start_bus_after_reset(struct sdw_intel *sdw) } sdw_cdns_check_self_clearing_bits(cdns, __func__, true, INTEL_MASTER_RESET_ITERATIONS); + schedule_delayed_work(&cdns->attach_dwork, + msecs_to_jiffies(SDW_INTEL_DELAYED_ENUMERATION_MS)); + return 0; } @@ -184,6 +190,9 @@ int intel_start_bus_after_clock_stop(struct sdw_intel *sdw) sdw_cdns_check_self_clearing_bits(cdns, __func__, true, INTEL_MASTER_RESET_ITERATIONS); + schedule_delayed_work(&cdns->attach_dwork, + msecs_to_jiffies(SDW_INTEL_DELAYED_ENUMERATION_MS)); + return 0; } @@ -194,6 +203,8 @@ int intel_stop_bus(struct sdw_intel *sdw, bool clock_stop) bool wake_enable = false; int ret; + cancel_delayed_work_sync(&cdns->attach_dwork); + if (clock_stop) { ret = sdw_cdns_clock_stop(cdns, true); if (ret < 0) -- 2.43.0

1 0

[PATCH AUTOSEL 6.6 20/58] soundwire: intel_bus_common: enable interrupts before exiting reset
by Sasha Levin 04 Oct '24

04 Oct '24

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> [ Upstream commit 5aedb8d8336b0a0421b58ca27d1b572aa6695b5b ] The existing code enables the Cadence IP interrupts after the bus reset sequence. The problem with this sequence is that it might be pre-empted, giving SoundWire devices time to sync and report as ATTACHED before the interrupts are enabled. In that case, the Cadence IP will not detect a state change and will not throw an interrupt to proceed with the enumeration of a Device0. In our overnight stress tests, we observed that a slight sub-millisecond delay in enabling interrupts after the reset was correlated with detection failures. This problem is more prevalent on the LunarLake silicon, likely due to SOC integration changes, but it was observed on earlier generations as well. This patch reverts the sequence, with the interrupts enabled before performing the bus reset. This removes the race condition and makes sure the Cadence IP is able to detect the presence of a Device0 in all cases. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Link: https://lore.kernel.org/r/20240805115003.88035-1-yung-chuan.liao@linux.inte… Signed-off-by: Vinod Koul <vkoul(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/soundwire/intel_bus_common.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/soundwire/intel_bus_common.c b/drivers/soundwire/intel_bus_common.c index e5ac3cc7cb79b..179aa0d85951b 100644 --- a/drivers/soundwire/intel_bus_common.c +++ b/drivers/soundwire/intel_bus_common.c @@ -45,15 +45,15 @@ int intel_start_bus(struct sdw_intel *sdw) return ret; } - ret = sdw_cdns_exit_reset(cdns); + ret = sdw_cdns_enable_interrupt(cdns, true); if (ret < 0) { - dev_err(dev, "%s: unable to exit bus reset sequence: %d\n", __func__, ret); + dev_err(dev, "%s: cannot enable interrupts: %d\n", __func__, ret); return ret; } - ret = sdw_cdns_enable_interrupt(cdns, true); + ret = sdw_cdns_exit_reset(cdns); if (ret < 0) { - dev_err(dev, "%s: cannot enable interrupts: %d\n", __func__, ret); + dev_err(dev, "%s: unable to exit bus reset sequence: %d\n", __func__, ret); return ret; } @@ -136,15 +136,15 @@ int intel_start_bus_after_reset(struct sdw_intel *sdw) return ret; } - ret = sdw_cdns_exit_reset(cdns); + ret = sdw_cdns_enable_interrupt(cdns, true); if (ret < 0) { - dev_err(dev, "unable to exit bus reset sequence during resume\n"); + dev_err(dev, "cannot enable interrupts during resume\n"); return ret; } - ret = sdw_cdns_enable_interrupt(cdns, true); + ret = sdw_cdns_exit_reset(cdns); if (ret < 0) { - dev_err(dev, "cannot enable interrupts during resume\n"); + dev_err(dev, "unable to exit bus reset sequence during resume\n"); return ret; } -- 2.43.0

1 0

[PATCH AUTOSEL 6.10 39/70] soundwire: cadence: re-check Peripheral status with delayed_work
by Sasha Levin 04 Oct '24

04 Oct '24

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> [ Upstream commit f8c35d61ba01afa76846905c67862cdace7f66b0 ] The SoundWire peripheral enumeration is entirely based on interrupts, more specifically sticky bits tracking state changes. This patch adds a defensive programming check on the actual status reported in PING frames. If for some reason an interrupt was lost or delayed, the delayed work would detect a peripheral change of status after the bus starts. The 100ms defined for the delay is not completely arbitrary, if a Peripheral didn't join the bus within that delay then probably the hardware link is broken, and conversely if the detection didn't happen because of software issues the 100ms is still acceptable in terms of user experience. The overhead of the one-shot workqueue is minimal, and the mutual exclusion ensures that the interrupt and delayed work cannot update the status concurrently. Reviewed-by: Liam Girdwood <liam.r.girdwood(a)intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Link: https://lore.kernel.org/r/20240805114921.88007-1-yung-chuan.liao@linux.inte… Signed-off-by: Vinod Koul <vkoul(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/soundwire/cadence_master.c | 39 ++++++++++++++++++++++++++-- drivers/soundwire/cadence_master.h | 5 ++++ drivers/soundwire/intel.h | 2 ++ drivers/soundwire/intel_auxdevice.c | 1 + drivers/soundwire/intel_bus_common.c | 11 ++++++++ 5 files changed, 56 insertions(+), 2 deletions(-) diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c index 74da99034dab5..ec08e26cef829 100644 --- a/drivers/soundwire/cadence_master.c +++ b/drivers/soundwire/cadence_master.c @@ -891,8 +891,14 @@ static int cdns_update_slave_status(struct sdw_cdns *cdns, } } - if (is_slave) - return sdw_handle_slave_status(&cdns->bus, status); + if (is_slave) { + int ret; + + mutex_lock(&cdns->status_update_lock); + ret = sdw_handle_slave_status(&cdns->bus, status); + mutex_unlock(&cdns->status_update_lock); + return ret; + } return 0; } @@ -989,6 +995,31 @@ irqreturn_t sdw_cdns_irq(int irq, void *dev_id) } EXPORT_SYMBOL(sdw_cdns_irq); +static void cdns_check_attached_status_dwork(struct work_struct *work) +{ + struct sdw_cdns *cdns = + container_of(work, struct sdw_cdns, attach_dwork.work); + enum sdw_slave_status status[SDW_MAX_DEVICES + 1]; + u32 val; + int ret; + int i; + + val = cdns_readl(cdns, CDNS_MCP_SLAVE_STAT); + + for (i = 0; i <= SDW_MAX_DEVICES; i++) { + status[i] = val & 0x3; + if (status[i]) + dev_dbg(cdns->dev, "Peripheral %d status: %d\n", i, status[i]); + val >>= 2; + } + + mutex_lock(&cdns->status_update_lock); + ret = sdw_handle_slave_status(&cdns->bus, status); + mutex_unlock(&cdns->status_update_lock); + if (ret < 0) + dev_err(cdns->dev, "%s: sdw_handle_slave_status failed: %d\n", __func__, ret); +} + /** * cdns_update_slave_status_work - update slave status in a work since we will need to handle * other interrupts eg. CDNS_MCP_INT_RX_WL during the update slave @@ -1741,7 +1772,11 @@ int sdw_cdns_probe(struct sdw_cdns *cdns) init_completion(&cdns->tx_complete); cdns->bus.port_ops = &cdns_port_ops; + mutex_init(&cdns->status_update_lock); + INIT_WORK(&cdns->work, cdns_update_slave_status_work); + INIT_DELAYED_WORK(&cdns->attach_dwork, cdns_check_attached_status_dwork); + return 0; } EXPORT_SYMBOL(sdw_cdns_probe); diff --git a/drivers/soundwire/cadence_master.h b/drivers/soundwire/cadence_master.h index bc84435e420f5..e1d7969ba48ae 100644 --- a/drivers/soundwire/cadence_master.h +++ b/drivers/soundwire/cadence_master.h @@ -117,6 +117,8 @@ struct sdw_cdns_dai_runtime { * @link_up: Link status * @msg_count: Messages sent on bus * @dai_runtime_array: runtime context for each allocated DAI. + * @status_update_lock: protect concurrency between interrupt-based and delayed work + * status update */ struct sdw_cdns { struct device *dev; @@ -148,10 +150,13 @@ struct sdw_cdns { bool interrupt_enabled; struct work_struct work; + struct delayed_work attach_dwork; struct list_head list; struct sdw_cdns_dai_runtime **dai_runtime_array; + + struct mutex status_update_lock; /* add mutual exclusion to sdw_handle_slave_status() */ }; #define bus_to_cdns(_bus) container_of(_bus, struct sdw_cdns, bus) diff --git a/drivers/soundwire/intel.h b/drivers/soundwire/intel.h index b68e74c294e70..c502dfdfe8abf 100644 --- a/drivers/soundwire/intel.h +++ b/drivers/soundwire/intel.h @@ -98,6 +98,8 @@ static inline void intel_writew(void __iomem *base, int offset, u16 value) #define INTEL_MASTER_RESET_ITERATIONS 10 +#define SDW_INTEL_DELAYED_ENUMERATION_MS 100 + #define SDW_INTEL_CHECK_OPS(sdw, cb) ((sdw) && (sdw)->link_res && (sdw)->link_res->hw_ops && \ (sdw)->link_res->hw_ops->cb) #define SDW_INTEL_OPS(sdw, cb) ((sdw)->link_res->hw_ops->cb) diff --git a/drivers/soundwire/intel_auxdevice.c b/drivers/soundwire/intel_auxdevice.c index 18517121cc898..58f6b4f33cabd 100644 --- a/drivers/soundwire/intel_auxdevice.c +++ b/drivers/soundwire/intel_auxdevice.c @@ -433,6 +433,7 @@ static void intel_link_remove(struct auxiliary_device *auxdev) */ if (!bus->prop.hw_disabled) { sdw_intel_debugfs_exit(sdw); + cancel_delayed_work_sync(&cdns->attach_dwork); sdw_cdns_enable_interrupt(cdns, false); } sdw_bus_master_delete(bus); diff --git a/drivers/soundwire/intel_bus_common.c b/drivers/soundwire/intel_bus_common.c index 179aa0d85951b..db9cf211671a3 100644 --- a/drivers/soundwire/intel_bus_common.c +++ b/drivers/soundwire/intel_bus_common.c @@ -60,6 +60,9 @@ int intel_start_bus(struct sdw_intel *sdw) sdw_cdns_check_self_clearing_bits(cdns, __func__, true, INTEL_MASTER_RESET_ITERATIONS); + schedule_delayed_work(&cdns->attach_dwork, + msecs_to_jiffies(SDW_INTEL_DELAYED_ENUMERATION_MS)); + return 0; } @@ -151,6 +154,9 @@ int intel_start_bus_after_reset(struct sdw_intel *sdw) } sdw_cdns_check_self_clearing_bits(cdns, __func__, true, INTEL_MASTER_RESET_ITERATIONS); + schedule_delayed_work(&cdns->attach_dwork, + msecs_to_jiffies(SDW_INTEL_DELAYED_ENUMERATION_MS)); + return 0; } @@ -184,6 +190,9 @@ int intel_start_bus_after_clock_stop(struct sdw_intel *sdw) sdw_cdns_check_self_clearing_bits(cdns, __func__, true, INTEL_MASTER_RESET_ITERATIONS); + schedule_delayed_work(&cdns->attach_dwork, + msecs_to_jiffies(SDW_INTEL_DELAYED_ENUMERATION_MS)); + return 0; } @@ -194,6 +203,8 @@ int intel_stop_bus(struct sdw_intel *sdw, bool clock_stop) bool wake_enable = false; int ret; + cancel_delayed_work_sync(&cdns->attach_dwork); + if (clock_stop) { ret = sdw_cdns_clock_stop(cdns, true); if (ret < 0) -- 2.43.0

1 0

[PATCH AUTOSEL 6.10 22/70] soundwire: intel_bus_common: enable interrupts before exiting reset
by Sasha Levin 04 Oct '24

04 Oct '24

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> [ Upstream commit 5aedb8d8336b0a0421b58ca27d1b572aa6695b5b ] The existing code enables the Cadence IP interrupts after the bus reset sequence. The problem with this sequence is that it might be pre-empted, giving SoundWire devices time to sync and report as ATTACHED before the interrupts are enabled. In that case, the Cadence IP will not detect a state change and will not throw an interrupt to proceed with the enumeration of a Device0. In our overnight stress tests, we observed that a slight sub-millisecond delay in enabling interrupts after the reset was correlated with detection failures. This problem is more prevalent on the LunarLake silicon, likely due to SOC integration changes, but it was observed on earlier generations as well. This patch reverts the sequence, with the interrupts enabled before performing the bus reset. This removes the race condition and makes sure the Cadence IP is able to detect the presence of a Device0 in all cases. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Link: https://lore.kernel.org/r/20240805115003.88035-1-yung-chuan.liao@linux.inte… Signed-off-by: Vinod Koul <vkoul(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/soundwire/intel_bus_common.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/soundwire/intel_bus_common.c b/drivers/soundwire/intel_bus_common.c index e5ac3cc7cb79b..179aa0d85951b 100644 --- a/drivers/soundwire/intel_bus_common.c +++ b/drivers/soundwire/intel_bus_common.c @@ -45,15 +45,15 @@ int intel_start_bus(struct sdw_intel *sdw) return ret; } - ret = sdw_cdns_exit_reset(cdns); + ret = sdw_cdns_enable_interrupt(cdns, true); if (ret < 0) { - dev_err(dev, "%s: unable to exit bus reset sequence: %d\n", __func__, ret); + dev_err(dev, "%s: cannot enable interrupts: %d\n", __func__, ret); return ret; } - ret = sdw_cdns_enable_interrupt(cdns, true); + ret = sdw_cdns_exit_reset(cdns); if (ret < 0) { - dev_err(dev, "%s: cannot enable interrupts: %d\n", __func__, ret); + dev_err(dev, "%s: unable to exit bus reset sequence: %d\n", __func__, ret); return ret; } @@ -136,15 +136,15 @@ int intel_start_bus_after_reset(struct sdw_intel *sdw) return ret; } - ret = sdw_cdns_exit_reset(cdns); + ret = sdw_cdns_enable_interrupt(cdns, true); if (ret < 0) { - dev_err(dev, "unable to exit bus reset sequence during resume\n"); + dev_err(dev, "cannot enable interrupts during resume\n"); return ret; } - ret = sdw_cdns_enable_interrupt(cdns, true); + ret = sdw_cdns_exit_reset(cdns); if (ret < 0) { - dev_err(dev, "cannot enable interrupts during resume\n"); + dev_err(dev, "unable to exit bus reset sequence during resume\n"); return ret; } -- 2.43.0

1 0

[PATCH AUTOSEL 6.11 42/76] soundwire: cadence: re-check Peripheral status with delayed_work
by Sasha Levin 04 Oct '24

04 Oct '24

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> [ Upstream commit f8c35d61ba01afa76846905c67862cdace7f66b0 ] The SoundWire peripheral enumeration is entirely based on interrupts, more specifically sticky bits tracking state changes. This patch adds a defensive programming check on the actual status reported in PING frames. If for some reason an interrupt was lost or delayed, the delayed work would detect a peripheral change of status after the bus starts. The 100ms defined for the delay is not completely arbitrary, if a Peripheral didn't join the bus within that delay then probably the hardware link is broken, and conversely if the detection didn't happen because of software issues the 100ms is still acceptable in terms of user experience. The overhead of the one-shot workqueue is minimal, and the mutual exclusion ensures that the interrupt and delayed work cannot update the status concurrently. Reviewed-by: Liam Girdwood <liam.r.girdwood(a)intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Link: https://lore.kernel.org/r/20240805114921.88007-1-yung-chuan.liao@linux.inte… Signed-off-by: Vinod Koul <vkoul(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/soundwire/cadence_master.c | 39 ++++++++++++++++++++++++++-- drivers/soundwire/cadence_master.h | 5 ++++ drivers/soundwire/intel.h | 2 ++ drivers/soundwire/intel_auxdevice.c | 1 + drivers/soundwire/intel_bus_common.c | 11 ++++++++ 5 files changed, 56 insertions(+), 2 deletions(-) diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c index e0683a5975d10..05652e983539b 100644 --- a/drivers/soundwire/cadence_master.c +++ b/drivers/soundwire/cadence_master.c @@ -890,8 +890,14 @@ static int cdns_update_slave_status(struct sdw_cdns *cdns, } } - if (is_slave) - return sdw_handle_slave_status(&cdns->bus, status); + if (is_slave) { + int ret; + + mutex_lock(&cdns->status_update_lock); + ret = sdw_handle_slave_status(&cdns->bus, status); + mutex_unlock(&cdns->status_update_lock); + return ret; + } return 0; } @@ -988,6 +994,31 @@ irqreturn_t sdw_cdns_irq(int irq, void *dev_id) } EXPORT_SYMBOL(sdw_cdns_irq); +static void cdns_check_attached_status_dwork(struct work_struct *work) +{ + struct sdw_cdns *cdns = + container_of(work, struct sdw_cdns, attach_dwork.work); + enum sdw_slave_status status[SDW_MAX_DEVICES + 1]; + u32 val; + int ret; + int i; + + val = cdns_readl(cdns, CDNS_MCP_SLAVE_STAT); + + for (i = 0; i <= SDW_MAX_DEVICES; i++) { + status[i] = val & 0x3; + if (status[i]) + dev_dbg(cdns->dev, "Peripheral %d status: %d\n", i, status[i]); + val >>= 2; + } + + mutex_lock(&cdns->status_update_lock); + ret = sdw_handle_slave_status(&cdns->bus, status); + mutex_unlock(&cdns->status_update_lock); + if (ret < 0) + dev_err(cdns->dev, "%s: sdw_handle_slave_status failed: %d\n", __func__, ret); +} + /** * cdns_update_slave_status_work - update slave status in a work since we will need to handle * other interrupts eg. CDNS_MCP_INT_RX_WL during the update slave @@ -1740,7 +1771,11 @@ int sdw_cdns_probe(struct sdw_cdns *cdns) init_completion(&cdns->tx_complete); cdns->bus.port_ops = &cdns_port_ops; + mutex_init(&cdns->status_update_lock); + INIT_WORK(&cdns->work, cdns_update_slave_status_work); + INIT_DELAYED_WORK(&cdns->attach_dwork, cdns_check_attached_status_dwork); + return 0; } EXPORT_SYMBOL(sdw_cdns_probe); diff --git a/drivers/soundwire/cadence_master.h b/drivers/soundwire/cadence_master.h index bc84435e420f5..e1d7969ba48ae 100644 --- a/drivers/soundwire/cadence_master.h +++ b/drivers/soundwire/cadence_master.h @@ -117,6 +117,8 @@ struct sdw_cdns_dai_runtime { * @link_up: Link status * @msg_count: Messages sent on bus * @dai_runtime_array: runtime context for each allocated DAI. + * @status_update_lock: protect concurrency between interrupt-based and delayed work + * status update */ struct sdw_cdns { struct device *dev; @@ -148,10 +150,13 @@ struct sdw_cdns { bool interrupt_enabled; struct work_struct work; + struct delayed_work attach_dwork; struct list_head list; struct sdw_cdns_dai_runtime **dai_runtime_array; + + struct mutex status_update_lock; /* add mutual exclusion to sdw_handle_slave_status() */ }; #define bus_to_cdns(_bus) container_of(_bus, struct sdw_cdns, bus) diff --git a/drivers/soundwire/intel.h b/drivers/soundwire/intel.h index 68838e843b543..f4235f5991c37 100644 --- a/drivers/soundwire/intel.h +++ b/drivers/soundwire/intel.h @@ -103,6 +103,8 @@ static inline void intel_writew(void __iomem *base, int offset, u16 value) #define INTEL_MASTER_RESET_ITERATIONS 10 +#define SDW_INTEL_DELAYED_ENUMERATION_MS 100 + #define SDW_INTEL_CHECK_OPS(sdw, cb) ((sdw) && (sdw)->link_res && (sdw)->link_res->hw_ops && \ (sdw)->link_res->hw_ops->cb) #define SDW_INTEL_OPS(sdw, cb) ((sdw)->link_res->hw_ops->cb) diff --git a/drivers/soundwire/intel_auxdevice.c b/drivers/soundwire/intel_auxdevice.c index 8807e01cbf7c7..dff49c5ce5b30 100644 --- a/drivers/soundwire/intel_auxdevice.c +++ b/drivers/soundwire/intel_auxdevice.c @@ -475,6 +475,7 @@ static void intel_link_remove(struct auxiliary_device *auxdev) */ if (!bus->prop.hw_disabled) { sdw_intel_debugfs_exit(sdw); + cancel_delayed_work_sync(&cdns->attach_dwork); sdw_cdns_enable_interrupt(cdns, false); } sdw_bus_master_delete(bus); diff --git a/drivers/soundwire/intel_bus_common.c b/drivers/soundwire/intel_bus_common.c index a75e5d7d87154..d3ff6c65b64c3 100644 --- a/drivers/soundwire/intel_bus_common.c +++ b/drivers/soundwire/intel_bus_common.c @@ -60,6 +60,9 @@ int intel_start_bus(struct sdw_intel *sdw) sdw_cdns_check_self_clearing_bits(cdns, __func__, true, INTEL_MASTER_RESET_ITERATIONS); + schedule_delayed_work(&cdns->attach_dwork, + msecs_to_jiffies(SDW_INTEL_DELAYED_ENUMERATION_MS)); + return 0; } @@ -151,6 +154,9 @@ int intel_start_bus_after_reset(struct sdw_intel *sdw) } sdw_cdns_check_self_clearing_bits(cdns, __func__, true, INTEL_MASTER_RESET_ITERATIONS); + schedule_delayed_work(&cdns->attach_dwork, + msecs_to_jiffies(SDW_INTEL_DELAYED_ENUMERATION_MS)); + return 0; } @@ -184,6 +190,9 @@ int intel_start_bus_after_clock_stop(struct sdw_intel *sdw) sdw_cdns_check_self_clearing_bits(cdns, __func__, true, INTEL_MASTER_RESET_ITERATIONS); + schedule_delayed_work(&cdns->attach_dwork, + msecs_to_jiffies(SDW_INTEL_DELAYED_ENUMERATION_MS)); + return 0; } @@ -194,6 +203,8 @@ int intel_stop_bus(struct sdw_intel *sdw, bool clock_stop) bool wake_enable = false; int ret; + cancel_delayed_work_sync(&cdns->attach_dwork); + if (clock_stop) { ret = sdw_cdns_clock_stop(cdns, true); if (ret < 0) -- 2.43.0

1 0

[PATCH AUTOSEL 6.11 23/76] soundwire: intel_bus_common: enable interrupts before exiting reset
by Sasha Levin 04 Oct '24

04 Oct '24

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> [ Upstream commit 5aedb8d8336b0a0421b58ca27d1b572aa6695b5b ] The existing code enables the Cadence IP interrupts after the bus reset sequence. The problem with this sequence is that it might be pre-empted, giving SoundWire devices time to sync and report as ATTACHED before the interrupts are enabled. In that case, the Cadence IP will not detect a state change and will not throw an interrupt to proceed with the enumeration of a Device0. In our overnight stress tests, we observed that a slight sub-millisecond delay in enabling interrupts after the reset was correlated with detection failures. This problem is more prevalent on the LunarLake silicon, likely due to SOC integration changes, but it was observed on earlier generations as well. This patch reverts the sequence, with the interrupts enabled before performing the bus reset. This removes the race condition and makes sure the Cadence IP is able to detect the presence of a Device0 in all cases. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Link: https://lore.kernel.org/r/20240805115003.88035-1-yung-chuan.liao@linux.inte… Signed-off-by: Vinod Koul <vkoul(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/soundwire/intel_bus_common.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/soundwire/intel_bus_common.c b/drivers/soundwire/intel_bus_common.c index df944e11b9caa..a75e5d7d87154 100644 --- a/drivers/soundwire/intel_bus_common.c +++ b/drivers/soundwire/intel_bus_common.c @@ -45,15 +45,15 @@ int intel_start_bus(struct sdw_intel *sdw) return ret; } - ret = sdw_cdns_exit_reset(cdns); + ret = sdw_cdns_enable_interrupt(cdns, true); if (ret < 0) { - dev_err(dev, "%s: unable to exit bus reset sequence: %d\n", __func__, ret); + dev_err(dev, "%s: cannot enable interrupts: %d\n", __func__, ret); return ret; } - ret = sdw_cdns_enable_interrupt(cdns, true); + ret = sdw_cdns_exit_reset(cdns); if (ret < 0) { - dev_err(dev, "%s: cannot enable interrupts: %d\n", __func__, ret); + dev_err(dev, "%s: unable to exit bus reset sequence: %d\n", __func__, ret); return ret; } @@ -136,15 +136,15 @@ int intel_start_bus_after_reset(struct sdw_intel *sdw) return ret; } - ret = sdw_cdns_exit_reset(cdns); + ret = sdw_cdns_enable_interrupt(cdns, true); if (ret < 0) { - dev_err(dev, "unable to exit bus reset sequence during resume\n"); + dev_err(dev, "cannot enable interrupts during resume\n"); return ret; } - ret = sdw_cdns_enable_interrupt(cdns, true); + ret = sdw_cdns_exit_reset(cdns); if (ret < 0) { - dev_err(dev, "cannot enable interrupts during resume\n"); + dev_err(dev, "unable to exit bus reset sequence during resume\n"); return ret; } -- 2.43.0

1 0

[PATCH v2] ALSA: hda/realtek: Fix the push button function for the ALC257
by Oder Chiou 04 Oct '24

04 Oct '24

The headset push button cannot work properly in case of the ALC257. This patch reverted the previous commit to correct the side effect. Fixes: ef9718b3d54e ("ALSA: hda/realtek: Fix noise from speakers on Lenovo IdeaPad 3 15IAU7") Signed-off-by: Oder Chiou <oder_chiou(a)realtek.com> --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index f787ff4182d4..86db1a4ec24c 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -587,6 +587,7 @@ static void alc_shutup_pins(struct hda_codec *codec) switch (codec->core.vendor_id) { case 0x10ec0236: case 0x10ec0256: + case 0x10ec0257: case 0x19e58326: case 0x10ec0283: case 0x10ec0285: -- 2.34.1

3 2

[PATCH] ASoC: codecs: wcd9335: remove unnecessary MODULE_ALIAS()
by Masahiro Yamada 03 Oct '24

03 Oct '24

Since commit b4b818305578 ("slimbus: generate MODULE_ALIAS() from MODULE_DEVICE_TABLE()"), modpost automatically generates MODULE_ALIAS() from MODULE_DEVICE_TABLE(slim, ). Signed-off-by: Masahiro Yamada <masahiroy(a)kernel.org> --- sound/soc/codecs/wcd9335.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/codecs/wcd9335.c b/sound/soc/codecs/wcd9335.c index 373a31ddccb2..a2521e16c099 100644 --- a/sound/soc/codecs/wcd9335.c +++ b/sound/soc/codecs/wcd9335.c @@ -5177,4 +5177,3 @@ static struct slim_driver wcd9335_slim_driver = { module_slim_driver(wcd9335_slim_driver); MODULE_DESCRIPTION("WCD9335 slim driver"); MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("slim:217:1a0:*"); -- 2.43.0

2 1

[PATCH] ASoC: dt-bindings: davinci-mcasp: Fix interrupts property
by Miquel Raynal 03 Oct '24

03 Oct '24

My understanding of the interrupts property is that it can either be: 1/ - TX 2/ - TX - RX 3/ - Common/combined. There are very little chances that either: - TX - Common/combined or even - TX - RX - Common/combined could be a thing. Looking at the interrupt-names definition (which uses oneOf instead of anyOf), it makes indeed little sense to use anyOf in the interrupts definition. I believe this is just a mistake, hence let's fix it. Fixes: 8be90641a0bb ("ASoC: dt-bindings: davinci-mcasp: convert McASP bindings to yaml schema") Signed-off-by: Miquel Raynal <miquel.raynal(a)bootlin.com> --- --- .../devicetree/bindings/sound/davinci-mcasp-audio.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml index 7735e08d35ba..ab3206ffa4af 100644 --- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml +++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml @@ -102,7 +102,7 @@ properties: default: 2 interrupts: - anyOf: + oneOf: - minItems: 1 items: - description: TX interrupt -- 2.43.0

4 7

[PATCH v1] soundwire: Correct some typos in comments
by Shen Lichuan 03 Oct '24

03 Oct '24

Fixed some confusing spelling errors that were currently identified, the details are as follows: -in the code comments: drivers/soundwire/bus.c:115: enumuration==> enumeration drivers/soundwire/qcom.c:1176: wil ==> will drivers/soundwire/sysfs_slave.c:218: highligh ==> highlight Signed-off-by: Shen Lichuan <shenlichuan(a)vivo.com> --- drivers/soundwire/bus.c | 2 +- drivers/soundwire/qcom.c | 2 +- drivers/soundwire/sysfs_slave.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index 263ca32f0c5c..d1dc62c34f1c 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -112,7 +112,7 @@ int sdw_bus_master_add(struct sdw_bus *bus, struct device *parent, /* Set higher order bits */ *bus->assigned = ~GENMASK(SDW_BROADCAST_DEV_NUM, SDW_ENUM_DEV_NUM); - /* Set enumuration device number and broadcast device number */ + /* Set enumeration device number and broadcast device number */ set_bit(SDW_ENUM_DEV_NUM, bus->assigned); set_bit(SDW_BROADCAST_DEV_NUM, bus->assigned); diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index aed57002fd0e..2b403b14066c 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -1173,7 +1173,7 @@ static int qcom_swrm_stream_alloc_ports(struct qcom_swrm_ctrl *ctrl, else sconfig.direction = SDW_DATA_DIR_RX; - /* hw parameters wil be ignored as we only support PDM */ + /* hw parameters will be ignored as we only support PDM */ sconfig.ch_count = 1; sconfig.frame_rate = params_rate(params); sconfig.type = stream->type; diff --git a/drivers/soundwire/sysfs_slave.c b/drivers/soundwire/sysfs_slave.c index f4259710dd0f..c5c22d1708ec 100644 --- a/drivers/soundwire/sysfs_slave.c +++ b/drivers/soundwire/sysfs_slave.c @@ -215,7 +215,7 @@ const struct attribute_group *sdw_attr_groups[] = { /* * the status is shown in capital letters for UNATTACHED and RESERVED - * on purpose, to highligh users to the fact that these status values + * on purpose, to highlight users to the fact that these status values * are not expected. */ static const char *const slave_status[] = { -- 2.17.1

2 1

[PATCH 0/4] refactor amd soundwire manager driver for acp 6.3 platform
by Vijendar Mukunda 03 Oct '24

03 Oct '24

This patch series refactors the amd soundwire manager driver to support acp 6.3 platform based on acp pci revision id. This patch series prepared on top of asoc tree for-next branch. This patch series should be applied at one go. @Vinod: Please help to review soundwire patches and provide ack-by for this patch series. Vijendar Mukunda (4): soundwire: amd: pass acp pci revision id as resource data soundwire: amd: refactor existing code for acp 6.3 platform ASoC: SOF: amd: pass acp_rev as soundwire resource data ASoC: amd: ps: pass acp pci revision id as soundwire resource data drivers/soundwire/amd_init.c | 1 + drivers/soundwire/amd_manager.c | 99 ++++++++++++++++++++----------- drivers/soundwire/amd_manager.h | 16 ++--- include/linux/soundwire/sdw_amd.h | 6 ++ sound/soc/amd/ps/acp63.h | 2 + sound/soc/amd/ps/pci-ps.c | 2 + sound/soc/sof/amd/acp.c | 1 + 7 files changed, 84 insertions(+), 43 deletions(-) -- 2.34.1

3 7

[GIT PULL] ASoC fixes for v6.12-rc1
by Mark Brown 03 Oct '24

03 Oct '24

The following changes since commit 9852d85ec9d492ebef56dc5f229416c925758edc: Linux 6.12-rc1 (2024-09-29 15:06:19 -0700) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git tags/asoc-fix-v6.12-rc1 for you to fetch changes up to eb1df4bbf53c29babf68fcb36e80d9c62a345257: qrb4210-rb2: add HDMI audio playback support (2024-10-02 18:38:11 +0100) ---------------------------------------------------------------- ASoC: Fixes for v6.12 A bunch of fixes here that came in during the merge window and the first week of release, plus some new quirks and device IDs. There's nothing major here, it's a bit bigger than it might've been due to there being no fixes sent during the merge window due to your vacation. ---------------------------------------------------------------- Alexey Klimov (3): ASoC: codecs: lpass-rx-macro: add missing CDC_RX_BCL_VBAT_RF_PROC2 to default regs values ASoC: dt-bindings: qcom,sm8250: add qrb4210-rb2-sndcard ASoC: qcom: sm8250: add qrb4210-rb2-sndcard compatible string Andrei Simion (1): ASoC: atmel: mchp-pdmc: Skip ALSA restoration if substream runtime is uninitialized Bard Liao (1): ASoC: Intel: soc-acpi-intel-rpl-match: add missing empty item Charles Han (1): ASoC: intel: sof_sdw: Add check devm_kasprintf() returned value Charles Keepax (1): ASoC: Intel: soc-acpi: arl: Fix some missing empty terminators David Lawrence Glanzman (1): ASoC: amd: yc: Add quirk for HP Dragonfly pro one Hui Wang (1): ASoC: imx-card: Set card.owner to avoid a warning calltrace if SND=m Mark Brown (3): Merge existing fixes from asoc/for-6.12 into new branch ASoC: Intel: soc-acpi: Fix missing empty terminators qrb4210-rb2: add HDMI audio playback support Miquel Raynal (1): ASoC: dt-bindings: davinci-mcasp: Fix interrupts property Ricardo Rivera-Matos (1): ASoC: cs35l45: Corrects cs35l45_get_clk_freq_id function data type Shengjiu Wang (1): ASoC: fsl_sai: Enable 'FIFO continue on error' FCONT bit Tang Bin (1): ASoC: topology: Fix incorrect addressing assignments Vijendar Mukunda (1): ASoC: amd: acp: don't set card long_name Wolfram Sang (1): ASoC: dt-bindings: renesas,rsnd: correct reg-names for R-Car Gen1 .../devicetree/bindings/sound/davinci-mcasp-audio.yaml | 2 +- Documentation/devicetree/bindings/sound/qcom,sm8250.yaml | 1 + Documentation/devicetree/bindings/sound/renesas,rsnd.yaml | 2 +- sound/soc/amd/acp/acp-sdw-sof-mach.c | 5 ----- sound/soc/amd/yc/acp6x-mach.c | 7 +++++++ sound/soc/atmel/mchp-pdmc.c | 3 +++ sound/soc/codecs/cs35l45-tables.c | 2 +- sound/soc/codecs/cs35l45.h | 2 +- sound/soc/codecs/lpass-rx-macro.c | 2 +- sound/soc/fsl/fsl_sai.c | 5 ++++- sound/soc/fsl/fsl_sai.h | 1 + sound/soc/fsl/imx-card.c | 1 + sound/soc/intel/boards/sof_sdw.c | 12 ++++++++++++ sound/soc/intel/common/soc-acpi-intel-arl-match.c | 2 ++ sound/soc/intel/common/soc-acpi-intel-rpl-match.c | 1 + sound/soc/qcom/sm8250.c | 1 + sound/soc/soc-topology.c | 4 ++-- 17 files changed, 40 insertions(+), 13 deletions(-)

2 1

[PATCH] ASoC: intel: sof_sdw: Add check devm_kasprintf() returned value
by Charles Han 02 Oct '24

02 Oct '24

devm_kasprintf() can return a NULL pointer on failure but this returned value is not checked. Fixes: b359760d95ee ("ASoC: intel: sof_sdw: Add simple DAI link creation helper") Signed-off-by: Charles Han <hanchunchao(a)inspur.com> --- sound/soc/intel/boards/sof_sdw.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c index d258728d64cf..26917f6f15cf 100644 --- a/sound/soc/intel/boards/sof_sdw.c +++ b/sound/soc/intel/boards/sof_sdw.c @@ -919,6 +919,9 @@ static int create_ssp_dailinks(struct snd_soc_card *card, char *cpu_dai_name = devm_kasprintf(dev, GFP_KERNEL, "SSP%d Pin", i); char *codec_name = devm_kasprintf(dev, GFP_KERNEL, "i2c-%s:0%d", ssp_info->acpi_id, j++); + if (!name || !cpu_dai_name || !codec_name) + return -ENOMEM; + int playback = ssp_info->dais[0].direction[SNDRV_PCM_STREAM_PLAYBACK]; int capture = ssp_info->dais[0].direction[SNDRV_PCM_STREAM_CAPTURE]; @@ -985,6 +988,9 @@ static int create_hdmi_dailinks(struct snd_soc_card *card, for (i = 0; i < hdmi_num; i++) { char *name = devm_kasprintf(dev, GFP_KERNEL, "iDisp%d", i + 1); char *cpu_dai_name = devm_kasprintf(dev, GFP_KERNEL, "iDisp%d Pin", i + 1); + if (!name || !cpu_dai_name) + return -ENOMEM; + char *codec_name, *codec_dai_name; if (intel_ctx->hdmi.idisp_codec) { @@ -996,6 +1002,9 @@ static int create_hdmi_dailinks(struct snd_soc_card *card, codec_dai_name = "snd-soc-dummy-dai"; } + if (!codec_dai_name) + return -ENOMEM; + ret = asoc_sdw_init_simple_dai_link(dev, *dai_links, be_id, name, 1, 0, // HDMI only supports playback cpu_dai_name, platform_component->name, @@ -1019,6 +1028,9 @@ static int create_bt_dailinks(struct snd_soc_card *card, SOF_BT_OFFLOAD_SSP_SHIFT; char *name = devm_kasprintf(dev, GFP_KERNEL, "SSP%d-BT", port); char *cpu_dai_name = devm_kasprintf(dev, GFP_KERNEL, "SSP%d Pin", port); + if (!name || !cpu_dai_name) + return -ENOMEM; + int ret; ret = asoc_sdw_init_simple_dai_link(dev, *dai_links, be_id, name, -- 2.31.1

3 2

[PATCH] ASoC: imx-card: Set card.owner to avoid a warning calltrace if SND=m
by Hui Wang 02 Oct '24

02 Oct '24

In most Linux distribution kernels, the SND is set to m, in such a case, when booting the kernel on i.MX8MP EVK board, there is a warning calltrace like below: Call trace: snd_card_init+0x484/0x4cc [snd] snd_card_new+0x70/0xa8 [snd] snd_soc_bind_card+0x310/0xbd0 [snd_soc_core] snd_soc_register_card+0xf0/0x108 [snd_soc_core] devm_snd_soc_register_card+0x4c/0xa4 [snd_soc_core] That is because the card.owner is not set, a warning calltrace is raised in the snd_card_init() due to it. Fixes: aa736700f42f ("ASoC: imx-card: Add imx-card machine driver") Signed-off-by: Hui Wang <hui.wang(a)canonical.com> --- sound/soc/fsl/imx-card.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/fsl/imx-card.c b/sound/soc/fsl/imx-card.c index 98b37dd2b901..a7215bad6484 100644 --- a/sound/soc/fsl/imx-card.c +++ b/sound/soc/fsl/imx-card.c @@ -710,6 +710,7 @@ static int imx_card_probe(struct platform_device *pdev) data->plat_data = plat_data; data->card.dev = &pdev->dev; + data->card.owner = THIS_MODULE; dev_set_drvdata(&pdev->dev, &data->card); snd_soc_card_set_drvdata(&data->card, data); -- 2.34.1

2 1

[PATCH] ASoC: qcom: Fix NULL Dereference in asoc_qcom_lpass_cpu_platform_probe()
by Gax-c 02 Oct '24

02 Oct '24

A devm_kzalloc() in asoc_qcom_lpass_cpu_platform_probe() could possibly return NULL pointer. NULL Pointer Dereference may be triggerred without addtional check. Add a NULL check for the returned pointer. Fixes: b5022a36d28f ("ASoC: qcom: lpass: Use regmap_field for i2sctl and dmactl registers") Signed-off-by: Zichen Xie <zichenxie0106(a)gmail.com> Cc: stable(a)vger.kernel.org Reported-by: Zichen Xie <zichenxie0106(a)gmail.com> --- sound/soc/qcom/lpass-cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c index 5a47f661e0c6..242bc16da36d 100644 --- a/sound/soc/qcom/lpass-cpu.c +++ b/sound/soc/qcom/lpass-cpu.c @@ -1242,6 +1242,8 @@ int asoc_qcom_lpass_cpu_platform_probe(struct platform_device *pdev) /* Allocation for i2sctl regmap fields */ drvdata->i2sctl = devm_kzalloc(&pdev->dev, sizeof(struct lpaif_i2sctl), GFP_KERNEL); + if (!drvdata->i2sctl) + return -ENOMEM; /* Initialize bitfields for dai I2SCTL register */ ret = lpass_cpu_init_i2sctl_bitfields(dev, drvdata->i2sctl, -- 2.25.1

3 2