October 2024 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] View alsa-lib plugins setup for any app?
by Eliot Blennerhassett 05 Dec '25

05 Dec '25

Greetings, running aplay -v will show the plugin chain setup. /proc/asound/card/pcm/* shows hw and sw params for the card driver when in use by any app Is there any way to show the alsa-lib plugin settings a-la aplay for an arbitrary application? thanks -- Eliot

4 8

[PATCH] ASoC: SOF: Intel: Retry codec probing if it fails
by Kai Vehmanen 04 Dec '25

04 Dec '25

From: Hui Wang <hui.wang(a)canonical.com> On the latest Lenovo Thinkstation laptops, we often experience the speaker failure after rebooting, check the dmesg, we could see: sof-audio-pci-intel-tgl 0000:00:1f.3: codec #0 probe error, ret: -5 The analogue codec on the machine is ALC287, then we designed a testcase to reboot and check the codec probing result repeatedly, we found the analogue codec probing always failed at least once within several minutes to several hours (roughly 1 reboot per min). This issue happens on all laptops of this Thinkstation model, but with legacy HDA driver, we couldn't reproduce this issue on those laptops. And so far, this issue is not reproduced on machines which don't belong to this model. We tried to make the hda_dsp_ctrl_init_chip() same as hda_intel_init_chip() which is the controller init routine in the legacy HDA driver, but it didn't help. We found when issue happens, the resp is -1, and if we let driver re-run send_cmd() and get_response(), it will get the correct response 10ec0287, then driver continues the rest work, finally boot to the desktop and all audio function work well. Here adding codec probing retries to 3 times, it could fix the issue on this Thinkstation model, and it doesn't bring impact to other machines. Reviewed-by: Bard Liao <bard.liao(a)intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Signed-off-by: Hui Wang <hui.wang(a)canonical.com> Signed-off-by: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> --- sound/soc/sof/intel/hda-codec.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) Notes: - patch for-5.16 on top of for-5.16 8a724d5f60 diff --git a/sound/soc/sof/intel/hda-codec.c b/sound/soc/sof/intel/hda-codec.c index 6744318de612..13cd96e6724a 100644 --- a/sound/soc/sof/intel/hda-codec.c +++ b/sound/soc/sof/intel/hda-codec.c @@ -22,6 +22,7 @@ #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC) #define IDISP_VID_INTEL 0x80860000 +#define CODEC_PROBE_RETRIES 3 /* load the legacy HDA codec driver */ static int request_codec_module(struct hda_codec *codec) @@ -121,12 +122,15 @@ static int hda_codec_probe(struct snd_sof_dev *sdev, int address, u32 hda_cmd = (address << 28) | (AC_NODE_ROOT << 20) | (AC_VERB_PARAMETERS << 8) | AC_PAR_VENDOR_ID; u32 resp = -1; - int ret; + int ret, retry = 0; + + do { + mutex_lock(&hbus->core.cmd_mutex); + snd_hdac_bus_send_cmd(&hbus->core, hda_cmd); + snd_hdac_bus_get_response(&hbus->core, address, &resp); + mutex_unlock(&hbus->core.cmd_mutex); + } while (resp == -1 && retry++ < CODEC_PROBE_RETRIES); - mutex_lock(&hbus->core.cmd_mutex); - snd_hdac_bus_send_cmd(&hbus->core, hda_cmd); - snd_hdac_bus_get_response(&hbus->core, address, &resp); - mutex_unlock(&hbus->core.cmd_mutex); if (resp == -1) return -EIO; dev_dbg(sdev->dev, "HDA codec #%d probed OK: response: %x\n", base-commit: 8a724d5f60904084e09de2685ff9e77bc8a40815 -- 2.34.1

3 2

[alsa-devel] Applied "ASoC: tlv320aic32x4: Model CODEC_CLKIN in CCF" to the asoc tree
by Mark Brown 02 Dec '25

02 Dec '25

The patch ASoC: tlv320aic32x4: Model CODEC_CLKIN in CCF has been applied to the asoc tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From fd2df3aeafa4b4cc468d58e147e0822967034b71 Mon Sep 17 00:00:00 2001 From: Annaliese McDermond <nh6z(a)nh6z.net> Date: Thu, 21 Mar 2019 17:58:46 -0700 Subject: [PATCH] ASoC: tlv320aic32x4: Model CODEC_CLKIN in CCF Model and manage codec clock input as a component in the Core Clock Framework. This should allow us to do some more complex clock management and power control. Also, some of the on-board chip clocks can be exposed to the outside, and this change will make those clocks easier to consume by other parts of the kernel. Signed-off-by: Annaliese McDermond <nh6z(a)nh6z.net> Signed-off-by: Mark Brown <broonie(a)kernel.org> --- sound/soc/codecs/tlv320aic32x4-clk.c | 34 ++++++++++++++++++++++++++++ sound/soc/codecs/tlv320aic32x4.c | 18 +++++++++++---- 2 files changed, 47 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/tlv320aic32x4-clk.c b/sound/soc/codecs/tlv320aic32x4-clk.c index 5e495fc8d931..cded85009c8c 100644 --- a/sound/soc/codecs/tlv320aic32x4-clk.c +++ b/sound/soc/codecs/tlv320aic32x4-clk.c @@ -265,6 +265,30 @@ static const struct clk_ops aic32x4_pll_ops = { .get_parent = clk_aic32x4_pll_get_parent, }; +static int clk_aic32x4_codec_clkin_set_parent(struct clk_hw *hw, u8 index) +{ + struct clk_aic32x4 *mux = to_clk_aic32x4(hw); + + return regmap_update_bits(mux->regmap, + AIC32X4_CLKMUX, + AIC32X4_CODEC_CLKIN_MASK, index << AIC32X4_CODEC_CLKIN_SHIFT); +} + +static u8 clk_aic32x4_codec_clkin_get_parent(struct clk_hw *hw) +{ + struct clk_aic32x4 *mux = to_clk_aic32x4(hw); + unsigned int val; + + regmap_read(mux->regmap, AIC32X4_CLKMUX, &val); + + return (val & AIC32X4_CODEC_CLKIN_MASK) >> AIC32X4_CODEC_CLKIN_SHIFT; +} + +static const struct clk_ops aic32x4_codec_clkin_ops = { + .set_parent = clk_aic32x4_codec_clkin_set_parent, + .get_parent = clk_aic32x4_codec_clkin_get_parent, +}; + static struct aic32x4_clkdesc aic32x4_clkdesc_array[] = { { .name = "pll", @@ -274,6 +298,14 @@ static struct aic32x4_clkdesc aic32x4_clkdesc_array[] = { .ops = &aic32x4_pll_ops, .reg = 0, }, + { + .name = "codec_clkin", + .parent_names = + (const char *[]) { "mclk", "bclk", "gpio", "pll" }, + .num_parents = 4, + .ops = &aic32x4_codec_clkin_ops, + .reg = 0, + }, }; static struct clk *aic32x4_register_clk(struct device *dev, @@ -314,6 +346,8 @@ int aic32x4_register_clocks(struct device *dev, const char *mclk_name) */ aic32x4_clkdesc_array[0].parent_names = (const char* []) { mclk_name, "bclk", "gpio", "din" }; + aic32x4_clkdesc_array[1].parent_names = + (const char *[]) { mclk_name, "bclk", "gpio", "pll" }; for (i = 0; i < ARRAY_SIZE(aic32x4_clkdesc_array); ++i) aic32x4_register_clk(dev, &aic32x4_clkdesc_array[i]); diff --git a/sound/soc/codecs/tlv320aic32x4.c b/sound/soc/codecs/tlv320aic32x4.c index 7cf8c7cedfe1..5496e4e080f4 100644 --- a/sound/soc/codecs/tlv320aic32x4.c +++ b/sound/soc/codecs/tlv320aic32x4.c @@ -735,12 +735,9 @@ static int aic32x4_setup_clocks(struct snd_soc_component *component, aic32x4_set_processing_blocks(component, aic32x4_divs[i].r_block, aic32x4_divs[i].p_block); - /* PLL as CODEC_CLKIN */ - snd_soc_component_update_bits(component, AIC32X4_CLKMUX, - AIC32X4_CODEC_CLKIN_MASK, - AIC32X4_CODEC_CLKIN_PLL << AIC32X4_CODEC_CLKIN_SHIFT); /* DAC_MOD_CLK as BDIV_CLKIN */ - snd_soc_component_update_bits(component, AIC32X4_IFACE3, AIC32X4_BDIVCLK_MASK, + snd_soc_component_update_bits(component, AIC32X4_IFACE3, + AIC32X4_BDIVCLK_MASK, AIC32X4_DACMOD2BCLK << AIC32X4_BDIVCLK_SHIFT); /* NDAC divider value */ @@ -987,6 +984,15 @@ static int aic32x4_component_probe(struct snd_soc_component *component) { struct aic32x4_priv *aic32x4 = snd_soc_component_get_drvdata(component); u32 tmp_reg; + int ret; + + struct clk_bulk_data clocks[] = { + { .id = "codec_clkin" }, + }; + + ret = devm_clk_bulk_get(component->dev, ARRAY_SIZE(clocks), clocks); + if (ret) + return ret; if (gpio_is_valid(aic32x4->rstn_gpio)) { ndelay(10); @@ -999,6 +1005,8 @@ static int aic32x4_component_probe(struct snd_soc_component *component) if (aic32x4->setup) aic32x4_setup_gpios(component); + clk_set_parent(clocks[0].clk, clocks[1].clk); + /* Power platform configuration */ if (aic32x4->power_cfg & AIC32X4_PWR_MICBIAS_2075_LDOIN) { snd_soc_component_write(component, AIC32X4_MICBIAS, -- 2.20.1

7 8

[PATCH] ASoC: wm8994: Prevent access to invalid VU register bits on WM1811
by Sylwester Nawrocki 20 Nov '25

20 Nov '25

The ADC2 and DAC2 are not available on WM1811 device. This patch moves the ADC2, DAC2 VU bitfields to a separate array so we can skip accessing them and avoid unreadable register access on WM1811. This allows to get rid of warnings during boot like: wm8994-codec: ASoC: error at soc_component_read_no_lock on wm8994-codec: -5 Signed-off-by: Sylwester Nawrocki <s.nawrocki(a)samsung.com> --- sound/soc/codecs/wm8994.c | 60 ++++++++++++++++++++++++++++----------- 1 file changed, 44 insertions(+), 16 deletions(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index a84ae879d37e..038be667c1a6 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -43,10 +43,12 @@ #define WM8994_NUM_DRC 3 #define WM8994_NUM_EQ 3 -static struct { +struct wm8994_reg_mask { unsigned int reg; unsigned int mask; -} wm8994_vu_bits[] = { +}; + +static struct wm8994_reg_mask wm8994_vu_bits[] = { { WM8994_LEFT_LINE_INPUT_1_2_VOLUME, WM8994_IN1_VU }, { WM8994_RIGHT_LINE_INPUT_1_2_VOLUME, WM8994_IN1_VU }, { WM8994_LEFT_LINE_INPUT_3_4_VOLUME, WM8994_IN2_VU }, @@ -60,14 +62,10 @@ static struct { { WM8994_AIF1_DAC1_LEFT_VOLUME, WM8994_AIF1DAC1_VU }, { WM8994_AIF1_DAC1_RIGHT_VOLUME, WM8994_AIF1DAC1_VU }, - { WM8994_AIF1_DAC2_LEFT_VOLUME, WM8994_AIF1DAC2_VU }, - { WM8994_AIF1_DAC2_RIGHT_VOLUME, WM8994_AIF1DAC2_VU }, { WM8994_AIF2_DAC_LEFT_VOLUME, WM8994_AIF2DAC_VU }, { WM8994_AIF2_DAC_RIGHT_VOLUME, WM8994_AIF2DAC_VU }, { WM8994_AIF1_ADC1_LEFT_VOLUME, WM8994_AIF1ADC1_VU }, { WM8994_AIF1_ADC1_RIGHT_VOLUME, WM8994_AIF1ADC1_VU }, - { WM8994_AIF1_ADC2_LEFT_VOLUME, WM8994_AIF1ADC2_VU }, - { WM8994_AIF1_ADC2_RIGHT_VOLUME, WM8994_AIF1ADC2_VU }, { WM8994_AIF2_ADC_LEFT_VOLUME, WM8994_AIF2ADC_VU }, { WM8994_AIF2_ADC_RIGHT_VOLUME, WM8994_AIF1ADC2_VU }, { WM8994_DAC1_LEFT_VOLUME, WM8994_DAC1_VU }, @@ -76,6 +74,14 @@ static struct { { WM8994_DAC2_RIGHT_VOLUME, WM8994_DAC2_VU }, }; +/* VU bitfields for ADC2, DAC2 not available on WM1811 */ +static struct wm8994_reg_mask wm8994_adc2_dac2_vu_bits[] = { + { WM8994_AIF1_DAC2_LEFT_VOLUME, WM8994_AIF1DAC2_VU }, + { WM8994_AIF1_DAC2_RIGHT_VOLUME, WM8994_AIF1DAC2_VU }, + { WM8994_AIF1_ADC2_LEFT_VOLUME, WM8994_AIF1ADC2_VU }, + { WM8994_AIF1_ADC2_RIGHT_VOLUME, WM8994_AIF1ADC2_VU }, +}; + static int wm8994_drc_base[] = { WM8994_AIF1_DRC1_1, WM8994_AIF1_DRC2_1, @@ -1030,6 +1036,26 @@ static bool wm8994_check_class_w_digital(struct snd_soc_component *component) return true; } +static void wm8994_update_vu_bits(struct snd_soc_component *component) +{ + struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); + struct wm8994 *control = wm8994->wm8994; + int i; + + for (i = 0; i < ARRAY_SIZE(wm8994_vu_bits); i++) + snd_soc_component_write(component, wm8994_vu_bits[i].reg, + snd_soc_component_read(component, + wm8994_vu_bits[i].reg)); + if (control->type == WM1811) + return; + + for (i = 0; i < ARRAY_SIZE(wm8994_adc2_dac2_vu_bits); i++) + snd_soc_component_write(component, + wm8994_adc2_dac2_vu_bits[i].reg, + snd_soc_component_read(component, + wm8994_adc2_dac2_vu_bits[i].reg)); +} + static int aif_mclk_set(struct snd_soc_component *component, int aif, bool enable) { struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); @@ -1076,7 +1102,7 @@ static int aif1clk_ev(struct snd_soc_dapm_widget *w, struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); struct wm8994 *control = wm8994->wm8994; int mask = WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA; - int ret, i; + int ret; int dac; int adc; int val; @@ -1144,10 +1170,7 @@ static int aif1clk_ev(struct snd_soc_dapm_widget *w, break; case SND_SOC_DAPM_POST_PMU: - for (i = 0; i < ARRAY_SIZE(wm8994_vu_bits); i++) - snd_soc_component_write(component, wm8994_vu_bits[i].reg, - snd_soc_component_read(component, - wm8994_vu_bits[i].reg)); + wm8994_update_vu_bits(component); break; case SND_SOC_DAPM_PRE_PMD: @@ -1181,7 +1204,7 @@ static int aif2clk_ev(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); - int ret, i; + int ret; int dac; int adc; int val; @@ -1237,10 +1260,7 @@ static int aif2clk_ev(struct snd_soc_dapm_widget *w, break; case SND_SOC_DAPM_POST_PMU: - for (i = 0; i < ARRAY_SIZE(wm8994_vu_bits); i++) - snd_soc_component_write(component, wm8994_vu_bits[i].reg, - snd_soc_component_read(component, - wm8994_vu_bits[i].reg)); + wm8994_update_vu_bits(component); break; case SND_SOC_DAPM_PRE_PMD: @@ -4346,6 +4366,14 @@ static int wm8994_component_probe(struct snd_soc_component *component) wm8994_vu_bits[i].mask, wm8994_vu_bits[i].mask); + if (control->type != WM1811) { + for (i = 0; i < ARRAY_SIZE(wm8994_adc2_dac2_vu_bits); i++) + snd_soc_component_update_bits(component, + wm8994_adc2_dac2_vu_bits[i].reg, + wm8994_adc2_dac2_vu_bits[i].mask, + wm8994_adc2_dac2_vu_bits[i].mask); + } + /* Set the low bit of the 3D stereo depth so TLV matches */ snd_soc_component_update_bits(component, WM8994_AIF1_DAC1_FILTERS_2, 1 << WM8994_AIF1DAC1_3D_GAIN_SHIFT, -- 2.17.1

4 3

[PATCH] MAINTAINERS: update Tzung-Bi's email address
by Tzung-Bi Shih 11 Nov '25

11 Nov '25

Use kernel.org account instead. Signed-off-by: Tzung-Bi Shih <tzungbi(a)kernel.org> --- .../devicetree/bindings/sound/google,cros-ec-codec.yaml | 2 +- Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml | 2 +- MAINTAINERS | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml index c3e9f3485449..dea293f403d9 100644 --- a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml +++ b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml @@ -8,7 +8,7 @@ title: Audio codec controlled by ChromeOS EC maintainers: - Cheng-Yi Chiang <cychiang(a)chromium.org> - - Tzung-Bi Shih <tzungbi(a)google.com> + - Tzung-Bi Shih <tzungbi(a)kernel.org> description: | Google's ChromeOS EC codec is a digital mic codec provided by the diff --git a/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml b/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml index 1d73204451b1..ea7d4900ee4a 100644 --- a/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml +++ b/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Realtek rt1015p codec devicetree bindings maintainers: - - Tzung-Bi Shih <tzungbi(a)google.com> + - Tzung-Bi Shih <tzungbi(a)kernel.org> description: | Rt1015p is a rt1015 variant which does not support I2C and diff --git a/MAINTAINERS b/MAINTAINERS index cf0f18502372..f9749afc0b9d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4906,7 +4906,7 @@ F: drivers/platform/chrome/ CHROMEOS EC CODEC DRIVER M: Cheng-Yi Chiang <cychiang(a)chromium.org> -M: Tzung-Bi Shih <tzungbi(a)google.com> +M: Tzung-Bi Shih <tzungbi(a)kernel.org> R: Guenter Roeck <groeck(a)chromium.org> L: chrome-platform(a)lists.linux.dev S: Maintained -- 2.38.0.135.g90850a2211-goog

3 3

[alsa-devel] MOTU Midi Express XT
by holger＠dehnhardt.org 06 Nov '25

06 Nov '25

I own a MOTU Midi Express XT 8x8 interface which is connected through the parallel port. Recently I upgraded my system and the new motherboard does not have an ISA parallel port anymore... So I bought a PCI parallel port extension card - hoping that it will work with the ALSA driver (mtpav). So I changed the interrupt an port address in modules.conf but the driver is no longer recognized as an ALSA driver even though it loads without errors. As the device still perfectly fits my needs I would like to modify the driver to get it working again. Can anyone give me advice what should be changed in the drivers code to make it work on a pci port? Thanks Holger

3 12

[PATCH v1] slimbus: qcom-ngd-ctrl: Add stream disable support
by Viken Dadhaniya 24 Sep '25

24 Sep '25

Currently slimbus driver doesn't support stream disable callback, it only supports stream enable callback. In slimbus usecase, client is switching to new frequency with same channel and calling enable stream callback for new frequency but DSP subsystem is crashing as we are switching to new frequency with same channel without disabling stream for older frequency. Ideally, before switching to another frequency, client should call disable stream callback and then enable stream for newer frequency. Hence add support to disable stream via qcom_slim_ngd_disable_stream(). Signed-off-by: Viken Dadhaniya <quic_vdadhani(a)quicinc.com> --- drivers/slimbus/qcom-ngd-ctrl.c | 70 +++++++++++++++++++++++++++++++++ drivers/slimbus/slimbus.h | 13 ++++++ 2 files changed, 83 insertions(+) diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c index e0b21f0f79c1..d952827d2e12 100644 --- a/drivers/slimbus/qcom-ngd-ctrl.c +++ b/drivers/slimbus/qcom-ngd-ctrl.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 // Copyright (c) 2011-2017, The Linux Foundation. All rights reserved. // Copyright (c) 2018, Linaro Limited +// Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. #include <linux/irq.h> #include <linux/kernel.h> @@ -1084,6 +1085,74 @@ static int qcom_slim_ngd_enable_stream(struct slim_stream_runtime *rt) return ret; } +static int qcom_slim_ngd_disable_stream(struct slim_stream_runtime *rt) +{ + struct slim_device *sdev = rt->dev; + struct slim_controller *ctrl = sdev->ctrl; + struct slim_val_inf msg = {0}; + u8 wbuf[SLIM_MSGQ_BUF_LEN]; + u8 rbuf[SLIM_MSGQ_BUF_LEN]; + struct slim_msg_txn txn = {0,}; + int i, ret; + + txn.mt = SLIM_MSG_MT_DEST_REFERRED_USER; + txn.dt = SLIM_MSG_DEST_LOGICALADDR; + txn.la = SLIM_LA_MGR; + txn.ec = 0; + txn.msg = &msg; + txn.msg->num_bytes = 0; + txn.msg->wbuf = wbuf; + txn.msg->rbuf = rbuf; + + for (i = 0; i < rt->num_ports; i++) { + struct slim_port *port = &rt->ports[i]; + + if (txn.msg->num_bytes == 0) { + wbuf[txn.msg->num_bytes++] = (u8)(SLIM_CH_REMOVE << 6) + | (sdev->laddr & 0x1f); + + ret = slim_alloc_txn_tid(ctrl, &txn); + if (ret) { + dev_err(&sdev->dev, "Fail to allocate TID\n"); + return -ENXIO; + } + wbuf[txn.msg->num_bytes++] = txn.tid; + } + wbuf[txn.msg->num_bytes++] = port->ch.id; + } + + txn.mc = SLIM_USR_MC_CHAN_CTRL; + txn.rl = txn.msg->num_bytes + 4; + ret = qcom_slim_ngd_xfer_msg_sync(ctrl, &txn); + if (ret) { + slim_free_txn_tid(ctrl, &txn); + dev_err(&sdev->dev, "TX timed out:MC:0x%x,mt:0x%x ret:%d\n", + txn.mc, txn.mt, ret); + return ret; + } + + txn.mc = SLIM_USR_MC_RECONFIG_NOW; + txn.msg->num_bytes = 2; + wbuf[1] = sdev->laddr; + txn.rl = txn.msg->num_bytes + 4; + + ret = slim_alloc_txn_tid(ctrl, &txn); + if (ret) { + dev_err(ctrl->dev, "Fail to allocate TID ret:%d\n", ret); + return ret; + } + + wbuf[0] = txn.tid; + ret = qcom_slim_ngd_xfer_msg_sync(ctrl, &txn); + if (ret) { + slim_free_txn_tid(ctrl, &txn); + dev_err(&sdev->dev, "TX timed out:MC:0x%x,mt:0x%x ret:%d\n", + txn.mc, txn.mt, ret); + } + + return ret; +} + static int qcom_slim_ngd_get_laddr(struct slim_controller *ctrl, struct slim_eaddr *ea, u8 *laddr) { @@ -1642,6 +1711,7 @@ static int qcom_slim_ngd_ctrl_probe(struct platform_device *pdev) ctrl->ctrl.clkgear = SLIM_MAX_CLK_GEAR; ctrl->ctrl.get_laddr = qcom_slim_ngd_get_laddr; ctrl->ctrl.enable_stream = qcom_slim_ngd_enable_stream; + ctrl->ctrl.disable_stream = qcom_slim_ngd_disable_stream; ctrl->ctrl.xfer_msg = qcom_slim_ngd_xfer_msg; ctrl->ctrl.wakeup = NULL; ctrl->state = QCOM_SLIM_NGD_CTRL_DOWN; diff --git a/drivers/slimbus/slimbus.h b/drivers/slimbus/slimbus.h index 00a7f112574b..21543d125614 100644 --- a/drivers/slimbus/slimbus.h +++ b/drivers/slimbus/slimbus.h @@ -1,6 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2011-2017, The Linux Foundation + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. */ #ifndef _DRIVERS_SLIMBUS_H @@ -316,6 +317,18 @@ enum slim_transport_protocol { SLIM_PROTO_EXT_HALF_DUP, }; +/* + * enum slim_ch_control: Channel control. + * Activate will schedule channel and/or group of channels in the TDM frame. + * Suspend will keep the schedule but data-transfer won't happen. + * Remove will remove the channel/group from the TDM frame. + */ +enum slim_ch_control { + SLIM_CH_ACTIVATE, + SLIM_CH_SUSPEND, + SLIM_CH_REMOVE, +}; + /** * struct slim_stream_runtime - SLIMbus stream runtime instance * -- 2.17.1

2 2

retire_capture_urb: Corrected urb data len
by Sean Anderson 01 Aug '25

01 Aug '25

Hi all, I have a "FiiO DigiHug USB Audio" sound card (1852:7022) [3]. I have had no problems with the audio, but I did notice a large number of message like retire_capture_urb: 4992 callbacks suppressed in my dmesg [1]. This is caused by the "Corrected urb data len." warning. The patch adding this warning [2] makes it seem like this warning should be an uncommon occurance. However, based on the number of suppressed callbacks, this seems to be happening at a rate of around 500 Hz. Is this buggy hardware? Or is this a bug in the driver? Does there need to be a quirk? Or perhaps the warning above should be a debug instead? I'm using 5.15.0-46-generic. I know, I know; this is a vendor kernel. However, I went through the commits for sound/usb/pcm.c and didn't see any major differences. I also previously saw this issue on 5.4, so this probably isn't a regression. --Sean [1] I would have liked to post the actual message, but I was unable to figure out how to disable ratelimiting. I tried setting /proc/sys/kernel/printk_ratelimit to 0, /proc/sys/kernel/printk_ratelimit_burst to 5000, and /proc/sys/kernel/printk to 8. However, nothing seemed to have any effect (except that the callbacks suppressed messages were disabled). I find this very strange, given that the callbacks suppressed message uses KERN_WARN, and so does dev_warn_ratelimited. [2] https://lore.kernel.org/all/4B28A659.6070303@ladisch.de/T/ [3] Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x1852 GYROCOM C&C Co., LTD idProduct 0x7022 bcdDevice 0.01 iManufacturer 1 FiiO iProduct 2 DigiHug USB Audio iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0182 bNumInterfaces 4 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.00 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 58 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0012 1x 18 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 1 Control Device bInterfaceProtocol 0 iInterface 3 FiiO USB DAC-E10 AudioControl Interface Descriptor: bLength 10 bDescriptorType 36 bDescriptorSubtype 1 (HEADER) bcdADC 1.00 wTotalLength 0x003e bInCollection 2 baInterfaceNr(0) 2 baInterfaceNr(1) 3 AudioControl Interface Descriptor: bLength 12 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 5 wTerminalType 0x0605 SPDIF interface bAssocTerminal 0 bNrChannels 2 wChannelConfig 0x0003 Left Front (L) Right Front (R) iChannelNames 0 iTerminal 0 AudioControl Interface Descriptor: bLength 12 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 9 wTerminalType 0x0101 USB Streaming bAssocTerminal 0 bNrChannels 2 wChannelConfig 0x0003 Left Front (L) Right Front (R) iChannelNames 0 iTerminal 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 3 wTerminalType 0x0605 SPDIF interface bAssocTerminal 0 bSourceID 16 iTerminal 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 7 wTerminalType 0x0101 USB Streaming bAssocTerminal 0 bSourceID 5 iTerminal 0 AudioControl Interface Descriptor: bLength 10 bDescriptorType 36 bDescriptorSubtype 6 (FEATURE_UNIT) bUnitID 16 bSourceID 9 bControlSize 1 bmaControls(0) 0x01 Mute Control bmaControls(1) 0x02 Volume Control bmaControls(2) 0x02 Volume Control iFeature 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 7 bDelay 0 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 26 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 2 bBitResolution 16 bSamFreqType 6 Discrete tSamFreq[ 0] 8000 tSamFreq[ 1] 16000 tSamFreq[ 2] 32000 tSamFreq[ 3] 44100 tSamFreq[ 4] 48000 tSamFreq[ 5] 96000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 9 Transfer Type Isochronous Synch Type Adaptive Usage Type Data wMaxPacketSize 0x0184 1x 388 bytes bInterval 1 bRefresh 0 bSynchAddress 0 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 2 Decoded PCM samples wLockDelay 0x0002 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 2 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 7 bDelay 0 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 26 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 3 bBitResolution 24 bSamFreqType 6 Discrete tSamFreq[ 0] 8000 tSamFreq[ 1] 16000 tSamFreq[ 2] 32000 tSamFreq[ 3] 44100 tSamFreq[ 4] 48000 tSamFreq[ 5] 96000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 9 Transfer Type Isochronous Synch Type Adaptive Usage Type Data wMaxPacketSize 0x0246 1x 582 bytes bInterval 1 bRefresh 0 bSynchAddress 0 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 2 Decoded PCM samples wLockDelay 0x0002 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 9 bDelay 0 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 20 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 2 bBitResolution 16 bSamFreqType 4 Discrete tSamFreq[ 0] 32000 tSamFreq[ 1] 44100 tSamFreq[ 2] 48000 tSamFreq[ 3] 96000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 9 Transfer Type Isochronous Synch Type Adaptive Usage Type Data wMaxPacketSize 0x0184 1x 388 bytes bInterval 1 bRefresh 0 bSynchAddress 0 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 2 Decoded PCM samples wLockDelay 0x0002 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 2 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 9 bDelay 0 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 20 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 3 bBitResolution 24 bSamFreqType 4 Discrete tSamFreq[ 0] 32000 tSamFreq[ 1] 44100 tSamFreq[ 2] 48000 tSamFreq[ 3] 96000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 9 Transfer Type Isochronous Synch Type Adaptive Usage Type Data wMaxPacketSize 0x0246 1x 582 bytes bInterval 1 bRefresh 0 bSynchAddress 0 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 2 Decoded PCM samples wLockDelay 0x0002 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 3 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 9 bDelay 0 frames wFormatTag 0x2001 IEC1937_AC-3 AudioStreaming Interface Descriptor: bLength 11 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 3 (FORMAT_TYPE_III) bNrChannels 2 bSubframeSize 2 bBitResolution 16 bSamFreqType 1 Discrete tSamFreq[ 0] 48000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 9 Transfer Type Isochronous Synch Type Adaptive Usage Type Data wMaxPacketSize 0x00c0 1x 192 bytes bInterval 1 bRefresh 0 bSynchAddress 0 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 2 Decoded PCM samples wLockDelay 0x0002 can't get debug descriptor: Resource temporarily unavailable Device Status: 0x0000 (Bus Powered)

2 8

[PATCH] ASoC: qcom: x1e80100: Support boards with two speakers
by Krzysztof Kozlowski 17 Jul '25

17 Jul '25

Some Qualcomm X1E laptops have only two speakers. Regardless whether this sound card driver is suitable for them (we could re-use one for some older SoC), we should set reasonable channel map depending on the number of channels, not always 4-speaker setup. This change is necessary for bringing audio support on Lenovo Thinkpad T14s with Qualcomm X1E78100 and only two speakers. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- sound/soc/qcom/x1e80100.c | 40 ++++++++++++++++++++++++++++++++++----- 1 file changed, 35 insertions(+), 5 deletions(-) diff --git a/sound/soc/qcom/x1e80100.c b/sound/soc/qcom/x1e80100.c index 898b5c26bf1e..8eb57fc12f0d 100644 --- a/sound/soc/qcom/x1e80100.c +++ b/sound/soc/qcom/x1e80100.c @@ -95,23 +95,53 @@ static int x1e80100_snd_hw_params(struct snd_pcm_substream *substream, return qcom_snd_sdw_hw_params(substream, params, &data->sruntime[cpu_dai->id]); } +static int x1e80100_snd_hw_map_channels(unsigned int *ch_map, int num) +{ + switch (num) { + case 1: + ch_map[0] = PCM_CHANNEL_FC; + break; + case 2: + ch_map[0] = PCM_CHANNEL_FL; + ch_map[1] = PCM_CHANNEL_FR; + break; + case 3: + ch_map[0] = PCM_CHANNEL_FL; + ch_map[1] = PCM_CHANNEL_FR; + ch_map[2] = PCM_CHANNEL_FC; + break; + case 4: + ch_map[0] = PCM_CHANNEL_FL; + ch_map[1] = PCM_CHANNEL_LB; + ch_map[2] = PCM_CHANNEL_FR; + ch_map[3] = PCM_CHANNEL_RB; + break; + default: + return -EINVAL; + } + + return 0; +} + static int x1e80100_snd_prepare(struct snd_pcm_substream *substream) { struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream); struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0); struct x1e80100_snd_data *data = snd_soc_card_get_drvdata(rtd->card); struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id]; - const unsigned int rx_slot[4] = { PCM_CHANNEL_FL, - PCM_CHANNEL_LB, - PCM_CHANNEL_FR, - PCM_CHANNEL_RB }; + unsigned int channels = substream->runtime->channels; + unsigned int rx_slot[4]; int ret; switch (cpu_dai->id) { case WSA_CODEC_DMA_RX_0: case WSA_CODEC_DMA_RX_1: + ret = x1e80100_snd_hw_map_channels(rx_slot, channels); + if (ret) + return ret; + ret = snd_soc_dai_set_channel_map(cpu_dai, 0, NULL, - ARRAY_SIZE(rx_slot), rx_slot); + channels, rx_slot); if (ret) return ret; break; -- 2.43.0

3 2

[alsa-devel] ASoC TDM channel re-mapping
by Edward Cragg 17 Jun '25

17 Jun '25

Hi, We have an ASoC driver in which we have added support for TDM over an I2S interface. We would like to have the capability of re-mapping the channel ordering, for which i know there is a callback in place to start this process, set_channel_map. The only backend implementation of this is using the ALSA API and the .copy handler in an ALSA PCM driver to mutate data copied out of ALSA before it's DMA'd to hardware. This is in sound/soc/blackfin/bf5xx-i2s-pcm.c The problem we have is that the driver we're using currently uses a dmaengine based PCM driver, and i'm not sure whether this is compatible with using the .copy callback, without reimplementing the driver entirely as an ALSA PCM driver. Since there aren't very many examples in mainline, I was hoping to ask for advice for the best way of doing this. I wondered: - Would it be possible to add a functional copy callback using a dmaengine based PCM driver? - Otherwise, would there be a good way to implement channel remapping in a TDM frame using the dmaengine based PCM driver? or - Would the best way indeed be to reimplement the PCM driver as a normal ALSA PCM driver? Thanks, Ed Cragg

2 2

[PATCH] ASoC: qcom: soundwire: Add support for controlling audio CGCR from HLOS
by Srinivasa Rao Mandadapu 17 Jun '25

17 Jun '25

Add support for controlling soundwire audio CGCR interface using clock framework to make hclk ungating with software. As per new hardware changes, software has to always ungate hclk if soundwire is operational and keep it running. This requirement is for latest LPASS chipsets for RX, TX and WSA path to work. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam(a)quicinc.com> Co-developed-by: Venkata Prasad Potturu <quic_potturu(a)quicinc.com> Signed-off-by: Venkata Prasad Potturu <quic_potturu(a)quicinc.com> --- This patch set depends on: -- Clock driver patches with reset control support, yet to be posted. drivers/soundwire/qcom.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index fb183bd..440aad8 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -12,6 +12,7 @@ #include <linux/of_irq.h> #include <linux/of_device.h> #include <linux/regmap.h> +#include <linux/reset.h> #include <linux/slab.h> #include <linux/slimbus.h> #include <linux/soundwire/sdw.h> @@ -129,6 +130,7 @@ struct qcom_swrm_ctrl { struct device *dev; struct regmap *regmap; void __iomem *mmio; + struct reset_control *audio_cgcr; #ifdef CONFIG_DEBUG_FS struct dentry *debugfs; #endif @@ -618,6 +620,8 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl) val = FIELD_PREP(SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_BMSK, ctrl->rows_index); val |= FIELD_PREP(SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_BMSK, ctrl->cols_index); + reset_control_reset(ctrl->audio_cgcr); + ctrl->reg_write(ctrl, SWRM_MCP_FRAME_CTRL_BANK_ADDR(0), val); /* Enable Auto enumeration */ @@ -1269,6 +1273,9 @@ static int qcom_swrm_probe(struct platform_device *pdev) ctrl->bus.ops = &qcom_swrm_ops; ctrl->bus.port_ops = &qcom_swrm_port_ops; ctrl->bus.compute_params = &qcom_swrm_compute_params; + ctrl->audio_cgcr = devm_reset_control_get_exclusive(dev, "swr_audio_cgcr"); + if (IS_ERR(ctrl->audio_cgcr)) + dev_err(dev, "Failed to get audio_cgcr reset required for soundwire-v1.6.0\n"); ret = qcom_swrm_get_port_config(ctrl); if (ret) -- 2.7.4

2 3

[PATCH] ASoC: amd: acp: Fix support for a Huawei Matebook laptop
by Marian Postevca 17 Jun '25

17 Jun '25

Previous commit that added support for Huawei MateBook D16 2021 with Ryzen 4600H (HVY-WXX9 M1010) was incomplete. To activate support for this laptop, the DMI table in acp3x-es83xx machine driver must also be updated. Fixes: b5338b1b901e ("ASoC: amd: acp: Add support for a new Huawei Matebook laptop") Signed-off-by: Marian Postevca <posteuca(a)mutex.one> --- sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c b/sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c index f85b85ea4be9..2b0aa270a3e9 100644 --- a/sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c +++ b/sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c @@ -354,6 +354,14 @@ static const struct dmi_system_id acp3x_es83xx_dmi_table[] = { }, .driver_data = (void *)(ES83XX_ENABLE_DMIC|ES83XX_48_MHZ_MCLK), }, + { + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "HUAWEI"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HVY-WXX9"), + DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "M1010"), + }, + .driver_data = (void *)(ES83XX_ENABLE_DMIC), + }, { .matches = { DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "HUAWEI"), -- 2.43.0

2 1

[PATCH 0/1] Swapped l/r channels on ThinkBook 13x Gen4
by MadEnvel 28 May '25

28 May '25

Earlier commits introduced audio support for Lenovo ThinBook 13x Gen 4 that needed a patch due to missing _DSD config. Unfortunately, it looks like the left and right channels in the config are swapped. This patch fixes channel assignment. Tested on Lenovo ThinkBook 13x Gen4. MadEnvel (1): Fix swapped left and right channels for Lenovo ThinBook 13x Gen4 sound sound/pci/hda/cs35l41_hda_property.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) -- 2.45.2

4 4

[PATCH 0/9] ALSA: usb-audio: More fixes / improvements on PCM
by Takashi Iwai 22 Apr '25

22 Apr '25

Hi, this is a patch set for USB-audio to fix and improve the PCM stream handling. The primary target is the enhancement of the low-latency playback that was introduced recently for dealing with the small period size (that is used typically by JACK). There are a few other fixes that are relevant with it. The current patches are found in topic/usb-audio branch of sound.git tree, too. Takashi === Takashi Iwai (9): ALSA: usb-audio: Restrict rates for the shared clocks ALSA: usb-audio: Fix possible race at sync of urb completions ALSA: usb-audio: Rename early_playback_start flag with lowlatency_playback ALSA: usb-audio: Disable low-latency playback for free-wheel mode ALSA: usb-audio: Disable low-latency mode for implicit feedback sync ALSA: usb-audio: Check available frames for the next packet size ALSA: usb-audio: Add spinlock to stop_urbs() ALSA: usb-audio: Improved lowlatency playback support ALSA: usb-audio: Avoid killing in-flight URBs during draining sound/usb/card.h | 11 ++- sound/usb/endpoint.c | 230 +++++++++++++++++++++++++++++++------------ sound/usb/endpoint.h | 13 ++- sound/usb/pcm.c | 157 ++++++++++++++++++++++------- 4 files changed, 305 insertions(+), 106 deletions(-) -- 2.26.2

2 23

ALSA 1.2.8 release
by Jaroslav Kysela 15 Apr '25

15 Apr '25

Hello all, new ALSA userspace packages were released. You may download them from the ALSA website http://www.alsa-project.org or directly: HTTP: https://www.alsa-project.org/files/pub FTP: ftp://ftp.alsa-project.org/pub Released packages: alsa-lib alsa-utils alsa-ucm-conf tinycompress Full list of changes: https://www.alsa-project.org/wiki/Changes_v1.2.7.2_v1.2.8 The fingerprint of the public signing key is: F04D F507 37AC 1A88 4C4B 3D71 8380 596D A6E5 9C91 Have fun, Jaroslav -- Jaroslav Kysela <perex(a)perex.cz> Linux Sound Maintainer; ALSA Project; Red Hat, Inc.

2 8

[PATCH 00/34] address all -Wunused-const warnings
by Arnd Bergmann 27 Jan '25

27 Jan '25

From: Arnd Bergmann <arnd(a)arndb.de> Compilers traditionally warn for unused 'static' variables, but not if they are constant. The reason here is a custom for C++ programmers to define named constants as 'static const' variables in header files instead of using macros or enums. In W=1 builds, we get warnings only static const variables in C files, but not in headers, which is a good compromise, but this still produces warning output in at least 30 files. These warnings are almost all harmless, but also trivial to fix, and there is no good reason to warn only about the non-const variables being unused. I've gone through all the files that I found using randconfig and allmodconfig builds and created patches to avoid these warnings, with the goal of retaining a clean build once the option is enabled by default. Unfortunately, there is one fairly large patch ("drivers: remove incorrect of_match_ptr/ACPI_PTR annotations") that touches 34 individual drivers that all need the same one-line change. If necessary, I can split it up by driver or by subsystem, but at least for reviewing I would keep it as one piece for the moment. Please merge the individual patches through subsystem trees. I expect that some of these will have to go through multiple revisions before they are picked up, so anything that gets applied early saves me from resending. Arnd Arnd Bergmann (31): powerpc/fsl-soc: hide unused const variable ubsan: fix unused variable warning in test module platform: goldfish: remove ACPI_PTR() annotations i2c: pxa: hide unused icr_bits[] variable 3c515: remove unused 'mtu' variable tracing: hide unused ftrace_event_id_fops Input: synaptics: hide unused smbus_pnp_ids[] array power: rt9455: hide unused rt9455_boost_voltage_values efi: sysfb: don't build when EFI is disabled clk: ti: dpll: fix incorrect #ifdef checks apm-emulation: hide an unused variable sisfb: hide unused variables dma/congiguous: avoid warning about unused size_bytes leds: apu: remove duplicate DMI lookup data iio: ad5755: hook up of_device_id lookup to platform driver greybus: arche-ctrl: move device table to its right location lib: checksum: hide unused expected_csum_ipv6_magic[] sunrpc: suppress warnings for unused procfs functions comedi: ni_atmio: avoid warning for unused device_ids[] table iwlegacy: don't warn for unused variables with DEBUG_FS=n drm/komeda: don't warn for unused debugfs files firmware: qcom_scm: mark qcom_scm_qseecom_allowlist as __maybe_unused crypto: ccp - drop platform ifdef checks usb: gadget: omap_udc: remove unused variable isdn: kcapi: don't build unused procfs code cpufreq: intel_pstate: hide unused intel_pstate_cpu_oob_ids[] net: xgbe: remove extraneous #ifdef checks Input: imagis - remove incorrect ifdef checks sata: mv: drop unnecessary #ifdef checks ASoC: remove incorrect of_match_ptr/ACPI_PTR annotations spi: remove incorrect of_match_ptr annotations drivers: remove incorrect of_match_ptr/ACPI_PTR annotations kbuild: always enable -Wunused-const-variable Krzysztof Kozlowski (1): Input: stmpe-ts - mark OF related data as maybe unused arch/powerpc/sysdev/fsl_msi.c | 2 + drivers/ata/sata_mv.c | 64 +++++++++---------- drivers/char/apm-emulation.c | 5 +- drivers/char/ipmi/ipmb_dev_int.c | 2 +- drivers/char/tpm/tpm_ftpm_tee.c | 2 +- drivers/clk/ti/dpll.c | 10 ++- drivers/comedi/drivers/ni_atmio.c | 2 +- drivers/cpufreq/intel_pstate.c | 2 + drivers/crypto/ccp/sp-platform.c | 14 +--- drivers/dma/img-mdc-dma.c | 2 +- drivers/firmware/efi/Makefile | 3 +- drivers/firmware/efi/sysfb_efi.c | 2 - drivers/firmware/qcom/qcom_scm.c | 2 +- drivers/fpga/versal-fpga.c | 2 +- .../gpu/drm/arm/display/komeda/komeda_dev.c | 8 --- drivers/hid/hid-google-hammer.c | 6 +- drivers/i2c/busses/i2c-pxa.c | 2 +- drivers/i2c/muxes/i2c-mux-ltc4306.c | 2 +- drivers/i2c/muxes/i2c-mux-reg.c | 2 +- drivers/iio/dac/ad5755.c | 1 + drivers/input/mouse/synaptics.c | 2 + drivers/input/touchscreen/imagis.c | 4 +- drivers/input/touchscreen/stmpe-ts.c | 2 +- drivers/input/touchscreen/wdt87xx_i2c.c | 2 +- drivers/isdn/capi/Makefile | 3 +- drivers/isdn/capi/kcapi.c | 7 +- drivers/leds/leds-apu.c | 3 +- drivers/mux/adg792a.c | 2 +- drivers/net/ethernet/3com/3c515.c | 3 - drivers/net/ethernet/amd/xgbe/xgbe-platform.c | 8 --- drivers/net/ethernet/apm/xgene-v2/main.c | 2 +- drivers/net/ethernet/hisilicon/hns_mdio.c | 2 +- drivers/net/wireless/intel/iwlegacy/4965-rs.c | 15 +---- drivers/net/wireless/intel/iwlegacy/common.h | 2 - drivers/platform/goldfish/goldfish_pipe.c | 2 +- drivers/power/supply/rt9455_charger.c | 2 + drivers/regulator/pbias-regulator.c | 2 +- drivers/regulator/twl-regulator.c | 2 +- drivers/regulator/twl6030-regulator.c | 2 +- drivers/rtc/rtc-fsl-ftm-alarm.c | 2 +- drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 2 +- drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 2 +- drivers/spi/spi-armada-3700.c | 2 +- drivers/spi/spi-img-spfi.c | 2 +- drivers/spi/spi-meson-spicc.c | 2 +- drivers/spi/spi-meson-spifc.c | 2 +- drivers/spi/spi-orion.c | 2 +- drivers/spi/spi-pic32-sqi.c | 2 +- drivers/spi/spi-pic32.c | 2 +- drivers/spi/spi-rockchip.c | 2 +- drivers/spi/spi-s3c64xx.c | 2 +- drivers/spi/spi-st-ssc4.c | 2 +- drivers/staging/greybus/arche-apb-ctrl.c | 1 + drivers/staging/greybus/arche-platform.c | 9 +-- drivers/staging/pi433/pi433_if.c | 2 +- drivers/tty/serial/amba-pl011.c | 6 +- drivers/tty/serial/ma35d1_serial.c | 2 +- drivers/usb/gadget/udc/omap_udc.c | 10 +-- drivers/video/fbdev/sis/init301.c | 3 +- kernel/dma/contiguous.c | 2 +- kernel/trace/trace_events.c | 4 ++ lib/checksum_kunit.c | 2 + lib/test_ubsan.c | 2 +- net/sunrpc/cache.c | 10 +-- scripts/Makefile.extrawarn | 1 - sound/soc/atmel/sam9x5_wm8731.c | 2 +- sound/soc/codecs/rt5514-spi.c | 2 +- sound/soc/qcom/lpass-sc7280.c | 2 +- sound/soc/samsung/aries_wm8994.c | 2 +- 69 files changed, 121 insertions(+), 169 deletions(-) -- 2.39.2 Cc: Michael Ellerman <mpe(a)ellerman.id.au> Cc: Christophe Leroy <christophe.leroy(a)csgroup.eu> Cc: Damien Le Moal <dlemoal(a)kernel.org> Cc: Jiri Kosina <jikos(a)kernel.org> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: Corey Minyard <minyard(a)acm.org> Cc: Peter Huewe <peterhuewe(a)gmx.de> Cc: Jarkko Sakkinen <jarkko(a)kernel.org> Cc: Tero Kristo <kristo(a)kernel.org> Cc: Stephen Boyd <sboyd(a)kernel.org> Cc: Ian Abbott <abbotti(a)mev.co.uk> Cc: H Hartley Sweeten <hsweeten(a)visionengravers.com> Cc: Srinivas Pandruvada <srinivas.pandruvada(a)linux.intel.com> Cc: Len Brown <lenb(a)kernel.org> Cc: "Rafael J. Wysocki" <rafael(a)kernel.org> Cc: John Allen <john.allen(a)amd.com> Cc: Herbert Xu <herbert(a)gondor.apana.org.au> Cc: Vinod Koul <vkoul(a)kernel.org> Cc: Ard Biesheuvel <ardb(a)kernel.org> Cc: Bjorn Andersson <andersson(a)kernel.org> Cc: Moritz Fischer <mdf(a)kernel.org> Cc: Liviu Dudau <liviu.dudau(a)arm.com> Cc: Benjamin Tissoires <benjamin.tissoires(a)redhat.com> Cc: Andi Shyti <andi.shyti(a)kernel.org> Cc: Michael Hennerich <michael.hennerich(a)analog.com> Cc: Peter Rosin <peda(a)axentia.se> Cc: Lars-Peter Clausen <lars(a)metafoo.de> Cc: Jonathan Cameron <jic23(a)kernel.org> Cc: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Cc: Markuss Broks <markuss.broks(a)gmail.com> Cc: Alexandre Torgue <alexandre.torgue(a)foss.st.com> Cc: Lee Jones <lee(a)kernel.org> Cc: Jakub Kicinski <kuba(a)kernel.org> Cc: Shyam Sundar S K <Shyam-sundar.S-k(a)amd.com> Cc: Iyappan Subramanian <iyappan(a)os.amperecomputing.com> Cc: Yisen Zhuang <yisen.zhuang(a)huawei.com> Cc: Stanislaw Gruszka <stf_xl(a)wp.pl> Cc: Kalle Valo <kvalo(a)kernel.org> Cc: Sebastian Reichel <sre(a)kernel.org> Cc: Tony Lindgren <tony(a)atomide.com> Cc: Mark Brown <broonie(a)kernel.org> Cc: Alexandre Belloni <alexandre.belloni(a)bootlin.com> Cc: Xiang Chen <chenxiang66(a)hisilicon.com> Cc: "Martin K. Petersen" <martin.petersen(a)oracle.com> Cc: Neil Armstrong <neil.armstrong(a)linaro.org> Cc: Heiko Stuebner <heiko(a)sntech.de> Cc: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> Cc: Vaibhav Hiremath <hvaibhav.linux(a)gmail.com> Cc: Alex Elder <elder(a)kernel.org> Cc: Jiri Slaby <jirislaby(a)kernel.org> Cc: Jacky Huang <ychuang3(a)nuvoton.com> Cc: Helge Deller <deller(a)gmx.de> Cc: Christoph Hellwig <hch(a)lst.de> Cc: Robin Murphy <robin.murphy(a)arm.com> Cc: Steven Rostedt <rostedt(a)goodmis.org> Cc: Masami Hiramatsu <mhiramat(a)kernel.org> Cc: Andrew Morton <akpm(a)linux-foundation.org> Cc: Kees Cook <keescook(a)chromium.org> Cc: Trond Myklebust <trond.myklebust(a)hammerspace.com> Cc: Anna Schumaker <anna(a)kernel.org> Cc: Masahiro Yamada <masahiroy(a)kernel.org> Cc: Nathan Chancellor <nathan(a)kernel.org> Cc: Takashi Iwai <tiwai(a)suse.com> Cc: linuxppc-dev(a)lists.ozlabs.org Cc: linux-kernel(a)vger.kernel.org Cc: linux-ide(a)vger.kernel.org Cc: openipmi-developer(a)lists.sourceforge.net Cc: linux-integrity(a)vger.kernel.org Cc: linux-omap(a)vger.kernel.org Cc: linux-clk(a)vger.kernel.org Cc: linux-pm(a)vger.kernel.org Cc: linux-crypto(a)vger.kernel.org Cc: dmaengine(a)vger.kernel.org Cc: linux-efi(a)vger.kernel.org Cc: linux-arm-msm(a)vger.kernel.org Cc: linux-fpga(a)vger.kernel.org Cc: dri-devel(a)lists.freedesktop.org Cc: linux-input(a)vger.kernel.org Cc: linux-i2c(a)vger.kernel.org Cc: linux-iio(a)vger.kernel.org Cc: linux-stm32(a)st-md-mailman.stormreply.com Cc: linux-arm-kernel(a)lists.infradead.org Cc: netdev(a)vger.kernel.org Cc: linux-leds(a)vger.kernel.org Cc: linux-wireless(a)vger.kernel.org Cc: linux-rtc(a)vger.kernel.org Cc: linux-scsi(a)vger.kernel.org Cc: linux-spi(a)vger.kernel.org Cc: linux-amlogic(a)lists.infradead.org Cc: linux-rockchip(a)lists.infradead.org Cc: linux-samsung-soc(a)vger.kernel.org Cc: greybus-dev(a)lists.linaro.org Cc: linux-staging(a)lists.linux.dev Cc: linux-serial(a)vger.kernel.org Cc: linux-usb(a)vger.kernel.org Cc: linux-fbdev(a)vger.kernel.org Cc: iommu(a)lists.linux.dev Cc: linux-trace-kernel(a)vger.kernel.org Cc: kasan-dev(a)googlegroups.com Cc: linux-hardening(a)vger.kernel.org Cc: linux-nfs(a)vger.kernel.org Cc: linux-kbuild(a)vger.kernel.org Cc: alsa-devel(a)alsa-project.org Cc: linux-sound(a)vger.kernel.org

7 7

[RESEND PATCH v2] drm/bridge: dw-hdmi-i2s: set insert_pcuv bit if hardware supports it
by Geraldo Nascimento 30 Dec '24

30 Dec '24

Hi Mark, resending this as it failed to apply in my last submission. Added Neil Armstrong to Cc: as hopefully he will be able to better review this. Thanks, Geraldo Nascimento --- Starting with version 2.10a of Synopsys DesignWare HDMI controller the insert_pcuv bit was introduced. On RK3399pro SoM (Radxa Rock Pi N10), for example, if we neglect to set this bit and proceed to enable hdmi_sound and i2s2 on the device tree there will be extreme clipping of sound output, to the point that music sounds like white noise. Problem could also manifest as just mild cracking depending of HDMI audio implementation of sink. Setting insert_pcuv bit (bit 2 of aud_conf2 Audio Sample register) fixes this. Signed-off-by: Geraldo Nascimento <geraldogabriel(a)gmail.com> --- v1->v2: SoC->SoM on description, better commenting, minor style changes, conditional application of fix for L-PCM only --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio-20221017.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio-20221017.c @@ -42,6 +42,7 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data, struct dw_hdmi *hdmi = audio->hdmi; u8 conf0 = 0; u8 conf1 = 0; + u8 conf2 = 0; u8 inputclkfs = 0; /* it cares I2S only */ @@ -101,6 +102,28 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data, return -EINVAL; } + /* + * dw-hdmi introduced insert_pcuv bit in + * version 2.10a. + * + * This single bit (bit 2 of HDMI_AUD_CONF2) + * when set to 1 will enable the insertion of the PCUV + * (Parity, Channel Status, User bit and Validity) + * bits on the incoming audio stream. + * + * Support is limited to Linear PCM audio. If + * neglected, the lack of valid PCUV bits + * on L-PCM streams will cause anything from + * mild cracking to full blown extreme + * clipping depending on the HDMI audio + * implementation of the sink. + * + */ + + if (hdmi_read(audio, HDMI_DESIGN_ID) >= 0x21 && + !(hparms->iec.status[0] & IEC958_AES0_NONAUDIO)) + conf2 = HDMI_AUD_CONF2_INSERT_PCUV; + dw_hdmi_set_sample_rate(hdmi, hparms->sample_rate); dw_hdmi_set_channel_status(hdmi, hparms->iec.status); dw_hdmi_set_channel_count(hdmi, hparms->channels); @@ -109,6 +120,7 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data, hdmi_write(audio, inputclkfs, HDMI_AUD_INPUTCLKFS); hdmi_write(audio, conf0, HDMI_AUD_CONF0); hdmi_write(audio, conf1, HDMI_AUD_CONF1); + hdmi_write(audio, conf2, HDMI_AUD_CONF2); return 0; } --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-20221017.h +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-20221017.h @@ -931,6 +931,11 @@ enum { HDMI_AUD_CONF1_WIDTH_16 = 0x10, HDMI_AUD_CONF1_WIDTH_24 = 0x18, +/* AUD_CONF2 field values */ + HDMI_AUD_CONF2_HBR = 0x01, + HDMI_AUD_CONF2_NLPCM = 0x02, + HDMI_AUD_CONF2_INSERT_PCUV = 0x04, + /* AUD_CTS3 field values */ HDMI_AUD_CTS3_N_SHIFT_OFFSET = 5, HDMI_AUD_CTS3_N_SHIFT_MASK = 0xe0,

3 6

[PATCH v4 0/9] ASoC: samsung: midas-audio: Add GPIO-based headset jack detection
by Artur Weber 29 Dec '24

29 Dec '24

Many of Samsung's Exynos 4 devices share the same midas-audio driver to handle the codec setup. While most of these devices, including the Midas itself, use the jack detection provided by the WM8994 driver, other devices such as the Samsung Galaxy Tab 3 8.0 (lt01) use two GPIOs and an ADC channel to determine jack insertion, the jack's type, and button presses (for headsets with volume up/down/play buttons). In the downstream kernel, this behavior is implemented in the sec-jack driver[1], and the per-device settings are configured in *-jack.c files in the mach folder (see e.g. the Tab 3's implementation[2]). This patchset implements this mechanism in the midas_wm1811.c driver, and adds new DTS options to allow for its configuration. It also enables jack detection for the Samsung Galaxy Tab 3 8.0. A very similar mechanism was already present in the aries_wm8994.c driver[3]; this implementation heavily borrows from it, though there are a few extra cleanups as well. Signed-off-by: Artur Weber <aweber.kernel(a)gmail.com> [1] https://github.com/gr8nole/android_kernel_samsung_smdk4x12/blob/lineage-14.… [2] https://github.com/gr8nole/android_kernel_samsung_smdk4x12/blob/lineage-14.… [3] https://github.com/torvalds/linux/blob/master/sound/soc/samsung/aries_wm899… --- Changes in v4: - Replaced manual regulator toggles with SND_SOC_DAPM_REGULATOR_SUPPLY, both for existing mic bias regulators and for the new headset mic bias regulator - Link to v3: https://lore.kernel.org/r/20240519-midas-wm1811-gpio-jack-v3-0-0c1736144c0e… Changes in v3: - Re-added pipe (|) character to samsung,headset-button-threshold-microvolt description to prevent it from being parsed as a mapping (fixes syntax error) - Split out "ASoC: dt-bindings: samsung,midas-audio: Add GPIO-based headset jack detection" into two patches - Link to v2: https://lore.kernel.org/r/20240508-midas-wm1811-gpio-jack-v2-0-b4d36cd02c6e… Changes in v2: - Added vendor prefix to threshold properties - Added separate headset mic bias regulator - Changed some cases of dev_err + return with return dev_err_probe - Added an extra patch to replace some previous dev_err + return cases with dev_err_probe - Moved tab3 DTS wm1811 codec config changes to separate commit --- Artur Weber (9): ASoC: dt-bindings: samsung,midas-audio: Add headset mic bias supply ASoC: dt-bindings: samsung,midas-audio: Add GPIO-based headset jack detection ASoC: samsung: midas_wm1811: Use SND_SOC_DAPM_REGULATOR_SUPPLY for bias regulators ASoC: samsung: midas_wm1811: Add headset mic bias supply support ASoC: samsung: midas_wm1811: Add GPIO-based headset jack detection ASoC: samsung: midas_wm1811: Use dev_err_probe where appropriate ARM: dts: samsung: exynos4212-tab3: Fix headset mic, add jack detection ARM: dts: samsung: exynos4212-tab3: Add MCLK2 clock to WM1811 codec config ARM: dts: samsung: exynos4212-tab3: Drop interrupt from WM1811 codec .../bindings/sound/samsung,midas-audio.yaml | 33 ++ arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi | 31 +- sound/soc/samsung/Kconfig | 2 +- sound/soc/samsung/midas_wm1811.c | 348 +++++++++++++++++---- 4 files changed, 343 insertions(+), 71 deletions(-) --- base-commit: a38297e3fb012ddfa7ce0321a7e5a8daeb1872b6 change-id: 20240502-midas-wm1811-gpio-jack-b10226b17ecc Best regards, -- Artur Weber <aweber.kernel(a)gmail.com>

3 12

[PATCH 00/35] Reorganize kerneldoc parameter names
by Julia Lawall 20 Dec '24

20 Dec '24

Reorganize kerneldoc parameter names to match the parameter order in the function header. The misordered cases were identified using the following Coccinelle semantic patch: // <smpl> @initialize:ocaml@ @@ let parse_doc l = let pieces = List.map String.trim (String.split_on_char '*' l) in let l = String.concat " " pieces in match String.split_on_char ':' l with x::xs -> x | _ -> "" let params ps = List.rev (List.fold_left (fun prev (pm,_) -> let ty = String.trim(Pretty_print_c.string_of_fullType pm.Ast_c.p_type) in if ty = "void" && pm.Ast_c.p_namei = None then prev else let name = match pm.Ast_c.p_namei with Some name -> name | None -> failwith "function parameter has no name" in (String.trim (Pretty_print_c.string_of_name name),ty)::prev) [] ps) @r@ comments c; identifier fn; position p; parameter list ps; type T; @@ T@c fn@p(ps) { ... } @script:ocaml@ p << r.p; c << r.c; (_,ps) << r.ps; @@ let isdoc c ps = List.length ps > 1 && (let c = String.trim c in String.length c > 3 && String.sub c 0 3 = "/**" && String.get c 3 != '*') in let subset l1 l2 = List.for_all (fun x -> List.mem x l2) l1 in let (cb,cm,ca) = List.hd c in match List.rev cb with c::_ when isdoc c ps -> let pieces = String.split_on_char '@' c in (match pieces with _::tl -> let d_names = List.map parse_doc tl in (* check parameters *) let p_names = List.map fst (params ps) in if d_names <> [] && not(d_names = p_names) then begin if List.sort compare d_names = List.sort compare p_names then Coccilib.print_main "out of order" p else if subset d_names p_names then Coccilib.print_main "doc is missing a parameter" p else if subset d_names p_names then Coccilib.print_main "doc has an extra parameter" p end | _ -> ()) | _ -> () // </smpl> --- arch/arm/mach-omap2/prm2xxx_3xxx.c | 1 - arch/powerpc/platforms/ps3/interrupt.c | 2 +- arch/powerpc/platforms/ps3/repository.c | 2 +- drivers/base/firmware_loader/main.c | 2 +- drivers/comedi/drivers/comedi_8254.c | 2 +- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 2 +- drivers/gpu/drm/amd/display/dc/core/dc.c | 2 +- drivers/gpu/drm/drm_gem_framebuffer_helper.c | 3 +-- drivers/gpu/drm/drm_gpuvm.c | 2 +- drivers/gpu/drm/radeon/radeon_ib.c | 2 +- drivers/iommu/iommu.c | 2 +- drivers/leds/leds-gpio-register.c | 2 +- drivers/mfd/atmel-smc.c | 4 ++-- drivers/misc/mei/bus.c | 2 +- drivers/mtd/ubi/eba.c | 2 +- drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c | 2 +- drivers/net/ethernet/intel/e1000/e1000_hw.c | 2 +- drivers/net/ethernet/intel/i40e/i40e_common.c | 7 +++---- drivers/net/ethernet/intel/ice/ice_common.c | 2 +- drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 2 +- drivers/nvdimm/dimm_devs.c | 2 +- drivers/pci/hotplug/pci_hotplug_core.c | 2 +- drivers/pinctrl/pinmux.c | 2 +- drivers/slimbus/messaging.c | 2 +- drivers/soc/qcom/qmi_interface.c | 2 +- drivers/soundwire/stream.c | 2 +- drivers/usb/gadget/config.c | 4 ++-- fs/char_dev.c | 2 +- fs/dcache.c | 4 ++-- fs/seq_file.c | 2 +- kernel/audit.c | 2 +- kernel/resource.c | 2 +- kernel/sysctl.c | 1 - kernel/trace/ring_buffer.c | 2 +- lib/lru_cache.c | 2 +- lib/maple_tree.c | 2 +- mm/mmu_notifier.c | 2 +- net/dccp/feat.c | 2 +- net/mac80211/mesh_hwmp.c | 6 +++--- net/mac80211/mesh_pathtbl.c | 10 +++++----- net/socket.c | 2 +- net/sunrpc/xprt.c | 2 +- net/tipc/link.c | 14 +++++++------- net/tipc/msg.c | 2 +- sound/pci/hda/hda_codec.c | 2 +- 45 files changed, 60 insertions(+), 64 deletions(-)

4 5

hda: how to implement component master_unbind?
by Kai Vehmanen 20 Dec '24

20 Dec '24

Hi Takashi et al, I've been having multiple discussions with our i915 team w.r.t. audio driver behaviour when the aggregate component is unbound, triggered by i915 unbind. This came up again in the recent regression with devres allocations and I now dug into the topic again. In short, I'm puzzled how to really implement this. ALSA (or ASoC) don't really have support for individual components of a card disappearing in a hotplug fashion. At card level, we do have such support (USB, firewire and recent work for PCI hotplug). But not individual components of a card getting unplugged. In current code we have this: static void hdac_component_master_unbind(struct device *dev) { » struct drm_audio_component *acomp = hdac_get_acomp(dev); » if (acomp->audio_ops && acomp->audio_ops->master_unbind) » » acomp->audio_ops->master_unbind(dev, acomp); » module_put(acomp->ops->owner); » component_unbind_all(dev, acomp); » WARN_ON(acomp->ops || acomp->dev); } ... when e.g. i915 driver is unbound (but could be any driver using the component framework, not jus Intel hw), i915 calls component_del() and HDA gets call to the above. After this, acomp ops are null are audio no longer has ability to talk to i915 driver (which makes sense given it's unbound). If audio was runtime suspended, this kind of works (but relies on some good luck). Upon HDA controller resume, we note acomp ops are NULL and HDMI/DP operations (like snd_hdac_display_power()) silently become no-ops. PCM streaming will go to /dev/null, but this is ok'ish since no monitor can be connected anyways. If audio was active, we start to get warnings or worse. Audio expects hw display codec to be powered and programmed, but suddenly it mey lose state. If the audio controller is actually part of the display hardware (e.g. discrete GPUs), then controller registers can stop functioning (they should be still available, but given the main diplay driver is unbound, odds of suprising behaviour are high). So this is less than ideal. I've been looking at options: 1) prevent/block the unbind if audio device is busy The component framework does not allow individual components to return -EBUSY, so there's no way to let others know that unbind is not possible now. This would force anyone testing DRM driver unbind to first unbind the audio driver and stop any active audio use-cases if needed. 2) unbind the ALSA card I've experimented doing a device_unregister() from the above callback, but this has not really worked (onion peeling exercise of new probelms). The code is shared by multiple controllers, so getting a handle to an snd_card object is not straighforward (drvdata is differnet for SOF and snd-hda-intel for instance). But with some new work, maybe we could call snd_card_disconnect() to detach the card and inform user-space. 3) continue as-is and try to fix bugs If audio is active, maybe we could force a acomp->put_power() to ensure a clean unregister of the display part. But this leaves a big chunk of issues especially with HDA controllers that require the display to be powered on, to function. .. Any ideas, and/or has there been prior work? It seems Takashi it's been mostly you who has been active working on the acomp integration recently. I also included Chris, Daniel and Jani who've had patches to hdac_component.c. Br, Kai

3 5

[PATCH] dt-bindings: sound:atmel-at91sam9g20ek: convert bindings to json-schema
by Balakrishnan Sambath 10 Dec '24

10 Dec '24

Convert atmel-at91sam9g20ek-wm8731-audio DT binding to yaml based json-schema.Change file name to match json-scheme naming. Signed-off-by: Balakrishnan Sambath <balakrishnan.s(a)microchip.com> --- .../bindings/sound/atmel,at91sam9g20ek-wm8731.yaml | 60 ++++++++++++++++++++++ .../sound/atmel-at91sam9g20ek-wm8731-audio.txt | 26 ---------- 2 files changed, 60 insertions(+), 26 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/atmel,at91sam9g20ek-wm8731.yaml b/Documentation/devicetree/bindings/sound/atmel,at91sam9g20ek-wm8731.yaml new file mode 100644 index 000000000000..f6330707fe1b --- /dev/null +++ b/Documentation/devicetree/bindings/sound/atmel,at91sam9g20ek-wm8731.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/atmel,at91sam9g20ek-wm8731.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel at91sam9g20ek wm8731 audio complex + +maintainers: + - Balakrishnan Sambath <balakrishnan.s(a)microchip.com> + +properties: + compatible: + const: atmel,at91sam9g20ek-wm8731-audio + + atmel,model: + $ref: /schemas/types.yaml#/definitions/string + description: The user-visible name of this sound complex. + atmel,audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: A list of the connections between audio components. + minItems: 2 + items: + enum: + # Board Connectors + - "Ext Spk" + - "Int MIC" + + # CODEC Pins + - LHPOUT + - MICIN + atmel,ssc-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the SSC controller + atmel,audio-codec: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of WM8731 audio codec + +required: + - compatible + - atmel,model + - atmel,audio-routing + - atmel,ssc-controller + - atmel,audio-codec + +additionalProperties: false + +examples: + - | + sound { + compatible = "atmel,at91sam9g20ek-wm8731-audio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck0_as_mck>; + atmel,model = "wm8731 @ AT91SAMG20EK"; + atmel,audio-routing = + "Ext Spk", "LHPOUT", + "Int MIC", "MICIN"; + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8731>; + }; diff --git a/Documentation/devicetree/bindings/sound/atmel-at91sam9g20ek-wm8731-audio.txt b/Documentation/devicetree/bindings/sound/atmel-at91sam9g20ek-wm8731-audio.txt deleted file mode 100644 index 9c5a9947b64d..000000000000 --- a/Documentation/devicetree/bindings/sound/atmel-at91sam9g20ek-wm8731-audio.txt +++ /dev/null @@ -1,26 +0,0 @@ -* Atmel at91sam9g20ek wm8731 audio complex - -Required properties: - - compatible: "atmel,at91sam9g20ek-wm8731-audio" - - atmel,model: The user-visible name of this sound complex. - - atmel,audio-routing: A list of the connections between audio components. - - atmel,ssc-controller: The phandle of the SSC controller - - atmel,audio-codec: The phandle of the WM8731 audio codec -Optional properties: - - pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt - -Example: -sound { - compatible = "atmel,at91sam9g20ek-wm8731-audio"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pck0_as_mck>; - - atmel,model = "wm8731 @ AT91SAMG20EK"; - - atmel,audio-routing = - "Ext Spk", "LHPOUT", - "Int MIC", "MICIN"; - - atmel,ssc-controller = <&ssc0>; - atmel,audio-codec = <&wm8731>; -}; --- base-commit: 0dd3ee31125508cd67f7e7172247f05b7fd1753a change-id: 20240214-at91sam9g20ek-wm8731-yaml-404ddddbb91a Best regards, -- Balakrishnan Sambath <balakrishnan.s(a)microchip.com>

5 5

[PATCH treewide 00/11] ASoC: Clean up {hp,mic}-det-gpio handling
by Geert Uytterhoeven 09 Dec '24

09 Dec '24

Hi all, The "gpio" suffix for GPIO consumers was deprecated a while ago, in favor of the "gpios" suffix. However, there are still several users of the "hp-det-gpio" and "mic-det-gpio" properties, in DT bindings, drivers, and DT source files. Drivers that use gpiolib handle both the deprecated and new properties transparently, but that is not the case when using of_property_*() calls directly. - The first patch fixes a bug, as the Freescale Generic ASoC Sound driver handles only the deprecated properties, while there is already a user of the new variants, - The second patch updates the Audio Graph and Simple Audio Card DT bindings, - Patches 3-9 converts various DTS files to use the new properties, - The last 2 patches convert Freescale sound device nodes to use the new properties. All patches can be applied independently, except for the last two, which depend on the first patch to avoid regressions. This series was compile-tested only. Thanks for your comments! Geert Uytterhoeven (11): ASoC: fsl-asoc-card: Add missing handling of {hp,mic}-dt-gpios ASoC: dt-bindings: Deprecate {hp,mic}-det-gpio ARM: dts: marvell: mmp2-olpc-xo-1-75: Switch to {hp,mic}-det-gpios arm64: dts: freescale: imx: Switch to simple-audio-card,hp-det-gpios arm64: dts: renesas: beacon-renesom: Switch to mic-det-gpios arm64: dts: rockchip: Switch to simple-audio-card,hp-det-gpios arm64: dts: rockchip: Switch to hp-det-gpios arm64: dts: uniphier: Switch to hp-det-gpios mips: dts: ingenic: Switch to simple-audio-card,hp-det-gpios ARM: dts: nxp: imx: Switch to {hp,mic}-det-gpios arm64: dts: freescale: imx: Switch to hp-det-gpios .../devicetree/bindings/sound/audio-graph.yaml | 6 ++++++ .../devicetree/bindings/sound/simple-card.yaml | 12 ++++++++++++ arch/arm/boot/dts/marvell/mmp2-olpc-xo-1-75.dts | 4 ++-- arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi | 4 ++-- arch/arm/boot/dts/nxp/imx/imx6sl-evk.dts | 2 +- arch/arm/boot/dts/nxp/imx/imx6sll-evk.dts | 2 +- arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi | 2 +- arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi | 2 +- arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts | 2 +- .../boot/dts/freescale/imx8mq-librem5-devkit.dts | 2 +- arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 2 +- arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 2 +- arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 2 +- arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts | 2 +- .../boot/dts/renesas/beacon-renesom-baseboard.dtsi | 2 +- .../boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi | 2 +- .../arm64/boot/dts/rockchip/rk3326-gameforce-chi.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi | 2 +- arch/arm64/boot/dts/rockchip/rk3368-lba3368.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts | 2 +- .../boot/dts/rockchip/rk3399-rock-pi-4a-plus.dts | 2 +- .../boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts | 2 +- .../boot/dts/rockchip/rk3399-sapphire-excavator.dts | 2 +- .../boot/dts/rockchip/rk3566-anbernic-rg-arc.dtsi | 2 +- .../boot/dts/rockchip/rk3566-anbernic-rg353p.dts | 2 +- .../boot/dts/rockchip/rk3566-anbernic-rg353ps.dts | 2 +- .../boot/dts/rockchip/rk3566-anbernic-rg353v.dts | 2 +- .../boot/dts/rockchip/rk3566-anbernic-rg353vs.dts | 2 +- .../boot/dts/rockchip/rk3566-anbernic-rg503.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi | 2 +- arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts | 2 +- .../dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi | 2 +- arch/arm64/boot/dts/rockchip/rk3588-ok3588-c.dts | 2 +- .../boot/dts/rockchip/rk3588-orangepi-5-plus.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts | 2 +- .../boot/dts/rockchip/rk3588s-gameforce-ace.dts | 2 +- .../boot/dts/socionext/uniphier-ld11-global.dts | 2 +- .../boot/dts/socionext/uniphier-ld20-global.dts | 2 +- arch/mips/boot/dts/ingenic/gcw0.dts | 2 +- arch/mips/boot/dts/ingenic/rs90.dts | 2 +- sound/soc/fsl/fsl-asoc-card.c | 8 +++++--- 50 files changed, 72 insertions(+), 52 deletions(-) -- 2.34.1 Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert(a)linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds

8 30

[PATCH v2 0/3] ASoC: mediatek:mt8186: fix both the speaker and hdmi
by Jiaxin Yu 06 Dec '24

06 Dec '24

The speaker and hdmi of mt8186 platform are shared the same port of I2S, when connect the external display, use build-in speakers to play audio, they both playback at the same time. So we want to manage the playback device through DAPM events. Change since v1: Support audio function for it6505 bridge to hdmi-codec Jiaxin Yu (3): ASoC: hdmi-codec: Add event handler for hdmi TX ASoC: mediatek: mt8186: correct the HDMI widgets drm/bridge: it6505: Add audio support drivers/gpu/drm/bridge/ite-it6505.c | 81 +++++++++++++++++-- include/sound/hdmi-codec.h | 6 ++ sound/soc/codecs/hdmi-codec.c | 37 ++++++++- .../mt8186/mt8186-mt6366-da7219-max98357.c | 2 +- .../mt8186/mt8186-mt6366-rt1019-rt5682s.c | 2 +- 5 files changed, 116 insertions(+), 12 deletions(-) -- 2.18.0

3 16

[PATCH] ASoC: tas2781: Fix redundant logical jump
by Tang Bin 02 Dec '24

02 Dec '24

In these functions, some logical jump of "goto" and variable are redundant, thus remove them. Signed-off-by: Tang Bin <tangbin(a)cmss.chinamobile.com> --- sound/soc/codecs/tas2781-i2c.c | 68 +++++++++++++--------------------- 1 file changed, 25 insertions(+), 43 deletions(-) diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index 68887799e..27f2f84a4 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -489,14 +489,11 @@ static int tas2563_calib_start_put(struct snd_kcontrol *kcontrol, struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol); struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(comp); const int sum = ARRAY_SIZE(tas2563_cali_start_reg); - int rc = 1; int i, j; guard(mutex)(&tas_priv->codec_lock); - if (tas_priv->chip_id != TAS2563) { - rc = -1; - goto out; - } + if (tas_priv->chip_id != TAS2563) + return -1; for (i = 0; i < tas_priv->ndev; i++) { struct tasdevice *tasdev = tas_priv->tasdevice; @@ -523,8 +520,8 @@ static int tas2563_calib_start_put(struct snd_kcontrol *kcontrol, q[j].val, 4); } } -out: - return rc; + + return 1; } static void tas2563_calib_stop_put(struct tasdevice_priv *tas_priv) @@ -576,7 +573,7 @@ static int tasdev_cali_data_put(struct snd_kcontrol *kcontrol, struct cali_reg *p = &cali_data->cali_reg_array; unsigned char *src = ucontrol->value.bytes.data; unsigned char *dst = cali_data->data; - int rc = 1, i = 0; + int i = 0; int j; guard(mutex)(&priv->codec_lock); @@ -605,7 +602,7 @@ static int tasdev_cali_data_put(struct snd_kcontrol *kcontrol, i += 3; memcpy(dst, &src[i], cali_data->total_sz); - return rc; + return 1; } static int tas2781_latch_reg_get(struct snd_kcontrol *kcontrol, @@ -1115,25 +1112,21 @@ static int tasdevice_dsp_create_ctrls(struct tasdevice_priv *tas_priv) char *conf_name, *prog_name; int nr_controls = 4; int mix_index = 0; - int ret; /* Alloc kcontrol via devm_kzalloc, which don't manually * free the kcontrol */ dsp_ctrls = devm_kcalloc(tas_priv->dev, nr_controls, sizeof(dsp_ctrls[0]), GFP_KERNEL); - if (!dsp_ctrls) { - ret = -ENOMEM; - goto out; - } + if (!dsp_ctrls) + return -ENOMEM; /* Create mixer items for selecting the active Program and Config */ prog_name = devm_kstrdup(tas_priv->dev, "Speaker Program Id", GFP_KERNEL); - if (!prog_name) { - ret = -ENOMEM; - goto out; - } + if (!prog_name) + return -ENOMEM; + dsp_ctrls[mix_index].name = prog_name; dsp_ctrls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER; dsp_ctrls[mix_index].info = tasdevice_info_programs; @@ -1143,10 +1136,9 @@ static int tasdevice_dsp_create_ctrls(struct tasdevice_priv *tas_priv) conf_name = devm_kstrdup(tas_priv->dev, "Speaker Config Id", GFP_KERNEL); - if (!conf_name) { - ret = -ENOMEM; - goto out; - } + if (!conf_name) + return -ENOMEM; + dsp_ctrls[mix_index].name = conf_name; dsp_ctrls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER; dsp_ctrls[mix_index].info = tasdevice_info_configurations; @@ -1156,10 +1148,9 @@ static int tasdevice_dsp_create_ctrls(struct tasdevice_priv *tas_priv) active_dev_num = devm_kstrdup(tas_priv->dev, "Activate Tasdevice Num", GFP_KERNEL); - if (!active_dev_num) { - ret = -ENOMEM; - goto out; - } + if (!active_dev_num) + return -ENOMEM; + dsp_ctrls[mix_index].name = active_dev_num; dsp_ctrls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER; dsp_ctrls[mix_index].info = tasdevice_info_active_num; @@ -1168,21 +1159,17 @@ static int tasdevice_dsp_create_ctrls(struct tasdevice_priv *tas_priv) mix_index++; chip_id = devm_kstrdup(tas_priv->dev, "Tasdevice Chip Id", GFP_KERNEL); - if (!chip_id) { - ret = -ENOMEM; - goto out; - } + if (!chip_id) + return -ENOMEM; + dsp_ctrls[mix_index].name = chip_id; dsp_ctrls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER; dsp_ctrls[mix_index].info = tasdevice_info_chip_id; dsp_ctrls[mix_index].get = tasdevice_get_chip_id; mix_index++; - ret = snd_soc_add_component_controls(tas_priv->codec, dsp_ctrls, + return snd_soc_add_component_controls(tas_priv->codec, dsp_ctrls, nr_controls < mix_index ? nr_controls : mix_index); - -out: - return ret; } static int tasdevice_create_cali_ctrls(struct tasdevice_priv *priv) @@ -1469,7 +1456,6 @@ static int tasdevice_hw_params(struct snd_pcm_substream *substream, unsigned int slot_width; unsigned int fsrate; int bclk_rate; - int rc = 0; fsrate = params_rate(params); switch (fsrate) { @@ -1479,8 +1465,7 @@ static int tasdevice_hw_params(struct snd_pcm_substream *substream, default: dev_err(tas_priv->dev, "%s: incorrect sample rate = %u\n", __func__, fsrate); - rc = -EINVAL; - goto out; + return -EINVAL; } slot_width = params_width(params); @@ -1493,20 +1478,17 @@ static int tasdevice_hw_params(struct snd_pcm_substream *substream, default: dev_err(tas_priv->dev, "%s: incorrect slot width = %u\n", __func__, slot_width); - rc = -EINVAL; - goto out; + return -EINVAL; } bclk_rate = snd_soc_params_to_bclk(params); if (bclk_rate < 0) { dev_err(tas_priv->dev, "%s: incorrect bclk rate = %d\n", __func__, bclk_rate); - rc = bclk_rate; - goto out; + return bclk_rate; } -out: - return rc; + return 0; } static int tasdevice_set_dai_sysclk(struct snd_soc_dai *codec_dai, -- 2.33.0

3 2

[RFC PATCH 0/2] Add support for stacked and parallel memories
by Amit Kumar Mahapatra 25 Nov '24

25 Nov '24

Hello Everyone, Following an email discussion with Miquel regarding the binding changes and overall architecture for implementing support for stacked and parallel memories, I’m sharing this RFC to initiate a discussion on the proposed updates to current bindings and to finalize the implementation architecture. Before diving into the main topic, here is some background on stacked and parallel memories. The AMD QSPI controller supports two advanced connection modes(Stacked and Parallel) which allow the controller to treat two different flashes as one storage. Stacked: Flashes share the same SPI bus, but different CS line, controller driver asserts the CS of the flash to which it needs to communicate. Stacked mode is a software abstraction rather than a controller feature or capability. At any given time, the controller communicates with one of the two connected flash devices, as determined by the requested address and data length. If an operation starts on one flash and ends on the other, the core needs to split it into two separate operations and adjust the data length accordingly. Parallel(Multi-CS): Both the flashes have their separate SPI bus, CS of both the flashes will be asserted/de-asserted at the same time. In this mode data will be split across both the flashes by enabling the STRIPE setting in the controller. Parallel mode is a controller feature where if the STRIPE bit is set then the controller internally handles the data split during data write to the flashes and while reading data from the flash the controller internally merges data from both the flashes before writing to the controller FIFO. If STRIPE is not enabled, then same data will be sent to both the devices. In parallel mode both the flashes should be identical. For more information on the modes please feel free to go through the controller flash interface below [1]. Mirochip QSPI controller[2] also supports "Dual Parallel 8-bit IO mode", but they call it "Twin Quad Mode". Initially in [3] [4] [5] Miquel had tried to extend MTD-CONCAT driver to support Stacked mode, but the bindings were not accepted. So, the MTD-CONCAT approach was dropped and the DT bindings that got accepted [6] [7] [8] that describes the two flash devices as being one. SPI core changes to support the above bindings were added [9]. While adding the support in SPI-NOR Tudor provided additional feedback, leading to a discussion on updating the current stacked and parallel DT bindings. Proposed Solution: The solution has two parts: 1. Update MTD-CONCAT Update MTD-CONCAT to create virtual concatinated mtd devices as defined in the device tree. 2. Add a New Layer Add a new layer between the SPI-NOR and MTD layers to support stacked and parallel configurations. This new layer will be part of spi-nor, located in mtd/spi-nor/, can be included/excluded via Kconfig, will be maintained by AMD and will: - During probing, store information from all connected flashes in stacked or parallel mode and present them as a single device to the MTD layer. - Register callbacks and manage MTD device registration within the new layer instead of spi-nor/core.c. - Make minimal changes in spi-nor/core.c, as stacked and parallel handling will be managed by the new layer on top of SPI-NOR. - Handle odd byte count requests from the MTD layer during flash operations in parallel mode. [1] https://docs.amd.com/r/en-US/am011-versal-acap-trm/QSPI-Flash-Device-Interf… [2] https://ww1.microchip.com/downloads/aemDocuments/documents/MPU32/ProductDoc… [3] https://lore.kernel.org/all/20191113171505.26128-4-miquel.raynal@bootlin.co… [4] https://lore.kernel.org/all/20191127105522.31445-5-miquel.raynal@bootlin.co… [5]https://lore.kernel.org/all/20211112152411.818321-1-miquel.raynal@bootlin… [6] https://github.com/torvalds/linux/commit/f89504300e94524d5d5846ff8b728592ac… [7] https://github.com/torvalds/linux/commit/eba5368503b4291db7819512600fa014ea… [8] https://github.com/torvalds/linux/commit/e2edd1b64f1c79e8abda365149ed62a2a9… [9]https://github.com/torvalds/linux/commit/4d8ff6b0991d5e86b17b235fc46ec62e… Thanks, Amit Amit Kumar Mahapatra (2): dt-bindings: mtd: Add bindings for describing concatinated MTD devices dt-bindings: spi: Update stacked and parallel bindings .../mtd/partitions/fixed-partitions.yaml | 18 +++++++++++++++ .../bindings/mtd/partitions/partitions.yaml | 6 +++++ .../bindings/spi/spi-controller.yaml | 23 +++++++++++++++++-- .../bindings/spi/spi-peripheral-props.yaml | 9 +++----- 4 files changed, 48 insertions(+), 8 deletions(-) -- 2.34.1

6 15