September 2023 - Alsa-devel - mailman.alsa-project.org

[PATCH v3 00/42] ep93xx device tree conversion
by Nikita Shubin via B4 Relay 13 Nov '23

13 Nov '23

This series aims to convert ep93xx from platform to full device tree support. The main goal is to receive ACK's to take it via Arnd's arm-soc branch. I've moved to b4, tricking it to consider v0 as v1, so it consider's this version to be v3, this exactly the third version. Link to previous versions: https://lore.kernel.org/all/20230424123522.18302-1-nikita.shubin@maquefel.m… Major changes with clocks: - split all ep93xx clk into two groups: - those who are special to ep93xx (i.e. can't be implemented via standard clk's) and use special swlocked registers - those who can be implemented via devm_clk_hw_register_gate, etc... - moved all clk's that are not used via device tree to SoC driver - dropped init and globals - devm_* everywhere Other notable changes: - added a global spinlock for SoC driver to protect swlocked register's. - moved dts file into cirrus - dropped "dt-bindings: gpio: Add Cirrus EP93xx" as it was taken by Bartosz via gpio subsystem on master v6.5-rc2-89-g3acbd4602b05: make dtbs_check ``` make -j34 -C build-linux ARCH=arm CROSS_COMPILE=armv4t-softfloat-linux-gnueabi- dtbs_check -s arch/arm/boot/dts/cirrus/ep93xx-edb9302.dtb:0:0: /soc/spi@808a0000/codec@0: failed to match any schema with compatible: ['cirrus,cs4271'] /home/maquefel/workshop/ts7250-boot-build/build-linux/arch/arm/boot/dts/cirrus/ep93xx-edb9302.dtb: sound: 'simple-audio-card,convert-sample-format' does not match any of the regexes: '^simple-audio-card,codec(@[0-9a-f]+)?$', '^simple-audio-card,cpu(@[0-9a-f]+)?$', '^simple-audio-card,dai-link(@[0-9a-f]+)?$', '^simple-audio-card,plat(@[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/maquefel/workshop/ts7250-boot-build/linux/Documentation/devicetree/bindings/sound/simple-card.yaml ``` cirrus,cs4271 is defined in linux/Documentation/devicetree/bindings/sound/cs4271.txt `make dt_binding_check` shows no issues. [PATCH v1 01/43] gpio: ep93xx: split device in multiple - core.c: - fixed tab used instead of space - unsigned i in ep93xx_init_devices - gpio-ep93xx.c: - single line for EP93XX_INT_DEBOUNCE_OFFSET - drop assignment from definition - s/devm_kcalloc/devm_kzalloc/ - value check for platform_get_irq - used dev_err_probe - s/if (irq <= 0)/if (irq < 0)/ [PATCH v1 02/43] dt-bindings: soc: Add Cirrus EP93xx - fixed title - dropped "+|" - dropped example, syscon, timer, required - dropped clock header from this patch and moved to clk patch - don't shadow irq_of_parse_and_map error NOTES: There is no possiblity to use fwnode_irq_get for TIMER_OF_DECLARE. [PATCH v1 03/43] soc: Add SoC driver for Cirrus ep93xx - s/Soc/SoC/ - sorted Kconfig, Makefile - s/linux/Linux/ - headers sorted - drop parentness - drop comment entirely (it's obvious) - drop global map - add SoC Bus stuff to get rid of exporting ep93xx_chip_revision Only PATA and CLK currently rely on revision, they can take it from soc_device_match. [PATCH v1 04/43] dt-bindings: clock: Add Cirrus EP93xx - filename now matches compatible - dropped description - dropped clock description - dropped fixed-clock from example - compatible first in example [PATCH v1 06/43] dt-bindings: pinctrl: Add Cirrus EP93xx - blank line after function - dropped minItems, maxItems for groups - fixed weird wrapping [PATCH v1 07/43] pinctrl: add a Cirrus ep93xx SoC pin controller Nikita Shubin - dropped 0 assigment in enum ep93xx_pinctrl_model - convert to pingroup - convert to pinfunction - str_enabled_disabled - s/of_match_node/of_device_get_match_data/ - numerous defaults for cases - convert to dev_err_probe - dropped dev_info noise - add "gpio2agrp" to ep9301/ep9302 as they have 0 pin of Port C exposed [PATCH v1 09/43] clocksource: ep93xx: Add driver for Cirrus Logic EP93xx - headers sorted - fixed comment - use lo_hi_readq and UINT_MAX [PATCH 12/43] clk: ep93xx: add DT support for Cirrus EP93xx - move out all clocks that aren't used in device tree to SoC driver (pll1, pll2, usb) - drop all static variables (regmap, clock data) - DMA and USB clocks as standart gates to avoid additional checks (all other require swlocked_write) - rearranged ep93xx_clk members to avoid holes - numerous fixes from Andy - don't get revision, use soc_device_match instead - added own clk_get function to distinguish fixed and own clocks [PATCH v1 14/43] power: reset: Add a driver for the ep93xx reset - added private data with regmap, as we dropped global regmap in SoC dirver - use dev_err_probe - + bits.h header [PATCH v1 17/43] dt-bindings: spi: Add Cirrus EP93xx - fixed filename to cirrus,ep9301-spi.yaml - dropped address and size cells - dropped cs-gpio - dropped cirrus,ep9301-use-dma - we are looking into "dmas" property now - added proper gpio defines [PATCH v1 18/43] spi: ep93xx: add DT support for Cirrus EP93xx - use device_set_node + dev_fwnode - s/of_property_present/device_property_present/ [PATCH v1 20/43] net: cirrus: add DT support for Cirrus EP93xx - +dev_err_probe [PATCH v1 22/43] dma: cirrus: add DT support for Cirrus EP93xx - dropped subsys_initcall probe - use of_device_get_match_data - use struct_size for allocating memory with channel array - rearranged data to take it out of CONFIG_OF - + dev_err_probe [PATCH v1 23/43] dt-bindings: mtd: Add ts7250 nand-controller - unevaluatedProperties: false - dropped address and size cells - added nand node [PATCH v1 24/43] mtd: nand: add support for ts72xx - return -EINVAL on engine_type == ON_HOST - added err_nand_cleanup goto - s/derived/Derived from/ - BIT and GENMASK - s/sizeof(struct ts72xx_nand_data)/sizeof(*data)/ and one line - fixed wierd mtd_device_parse_register error handling - added child node parsing to conform device tree bindings (i.e. partitions contained in 'nand@0' child node) [PATCH v1 26/43] pata: cirrus: add DT support for Cirrus EP93xx - headers reordering - s/-ENXIO/-ENOMEM/ - drop ep93xx_chip_revision, get data from soc_device_match - changed title to "ata: pata_ep93xx: add device tree support" [PATCH v1 27/43] dt-bindings: input: Add Cirrus EP93xx keypad - s/cirrus,debounce-delay-ms/debounce-delay-ms/ - cirrus,prescale -> uint16 and constraints - added "autorepeat" - fixed compatible in example [PATCH v1 28/43] input: keypad: ep93xx: add DT support for Cirrus EP93xx - added autorepeat - dropped module param flags entirely - s/of_property_read/device_property_read/ [PATCH v1 29/43] dt-bindings: rtc: Add ST M48T86 - renamed file to st,m48t86.yaml - fixed typo - reordered props [PATCH v1 33/43] dt-bindings: gpio: Add Cirrus EP93xx - renamed file to cirrus,ep9301-gpio.yaml - dropped explicit examples (but left port F with uses 8 interrupts) [PATCH v1 34/43] gpio: ep93xx: add DT support for gpio-ep93xx - s/Add match table./Add OF ID match table./ [PATCH v1 35/43] ARM: dts: add device tree for ep93xx Soc - splitted dtsi and dts - made nand-controller, leds, etc... part of the board and not SoC - dropped empty spi bus - labels sorted - dropped "delete-property" everywhere - compatible first, reg is second, ranges, if present, third - fixed wrapping - status last - moved cs gpios to board files - led0 -> led-0, led1 -> led-1 [PATCH v1 38/43] pata: cirrus: drop legacy pinctrl - changed title to "ata: pata_ep93xx: remove legacy pinctrl use" - removed ep93xx_ide_acquire_gpio and ep93xx_ide_release_gpio along with this patch -- 2.39.2 --- Alexander Sverdlin (2): ARM: dts: ep93xx: Add EDB9302 DT ASoC: cirrus: edb93xx: Delete driver Nikita Shubin (40): gpio: ep93xx: split device in multiple dt-bindings: clock: Add Cirrus EP93xx clk: ep93xx: add DT support for Cirrus EP93xx dt-bindings: pinctrl: Add Cirrus EP93xx pinctrl: add a Cirrus ep93xx SoC pin controller dt-bindings: soc: Add Cirrus EP93xx soc: Add SoC driver for Cirrus ep93xx dt-bindings: timers: Add Cirrus EP93xx clocksource: ep93xx: Add driver for Cirrus Logic EP93xx dt-bindings: rtc: Add Cirrus EP93xx rtc: ep93xx: add DT support for Cirrus EP93xx dt-bindings: watchdog: Add Cirrus EP93x watchdog: ep93xx: add DT support for Cirrus EP93xx power: reset: Add a driver for the ep93xx reset dt-bindings: pwm: Add Cirrus EP93xx pwm: ep93xx: add DT support for Cirrus EP93xx dt-bindings: spi: Add Cirrus EP93xx spi: ep93xx: add DT support for Cirrus EP93xx dt-bindings: net: Add Cirrus EP93xx net: cirrus: add DT support for Cirrus EP93xx dt-bindings: dma: Add Cirrus EP93xx dma: cirrus: add DT support for Cirrus EP93xx dt-bindings: mtd: Add ts7200 nand-controller mtd: nand: add support for ts72xx dt-bindings: ata: Add Cirrus EP93xx ata: pata_ep93xx: add device tree support dt-bindings: input: Add Cirrus EP93xx keypad input: keypad: ep93xx: add DT support for Cirrus EP93xx dt-bindings: rtc: Add ST M48T86 rtc: m48t86: add DT support for m48t86 dt-bindings: wdt: Add ts72xx wdt: ts72xx: add DT support for ts72xx gpio: ep93xx: add DT support for gpio-ep93xx ARM: dts: add Cirrus EP93XX SoC .dtsi ARM: dts: ep93xx: add ts7250 board ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms pwm: ep93xx: drop legacy pinctrl ata: pata_ep93xx: remove legacy pinctrl use ARM: ep93xx: delete all boardfiles ARM: ep93xx: soc: drop defines .../bindings/arm/cirrus/ep9301-syscon.yaml | 59 + .../devicetree/bindings/arm/cirrus/ep9301.yaml | 39 + .../bindings/ata/cirrus,ep9312-pata.yaml | 44 + .../bindings/clock/cirrus,ep9301-clk.yaml | 46 + .../bindings/dma/cirrus,ep9301-dma-m2m.yaml | 72 + .../bindings/dma/cirrus,ep9301-dma-m2p.yaml | 124 ++ .../bindings/input/cirrus,ep9307-keypad.yaml | 87 ++ .../devicetree/bindings/mtd/technologic,nand.yaml | 47 + .../devicetree/bindings/net/cirrus,ep9301-eth.yaml | 61 + .../bindings/pinctrl/cirrus,ep9301-pinctrl.yaml | 58 + .../devicetree/bindings/pwm/cirrus,ep9301-pwm.yaml | 48 + .../devicetree/bindings/rtc/cirrus,ep9301-rtc.yaml | 40 + .../devicetree/bindings/rtc/st,m48t86.yaml | 38 + .../devicetree/bindings/spi/cirrus,ep9301-spi.yaml | 63 + .../bindings/timer/cirrus,ep9301-timer.yaml | 49 + .../bindings/watchdog/cirrus,ep9301-wdt.yaml | 46 + .../bindings/watchdog/technologic,ts7200-wdt.yaml | 46 + arch/arm/Makefile | 1 - arch/arm/boot/dts/cirrus/Makefile | 4 + arch/arm/boot/dts/cirrus/ep93xx-bk3.dts | 126 ++ arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts | 178 +++ arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts | 145 ++ arch/arm/boot/dts/cirrus/ep93xx.dtsi | 449 ++++++ arch/arm/mach-ep93xx/Kconfig | 20 +- arch/arm/mach-ep93xx/Makefile | 11 - arch/arm/mach-ep93xx/clock.c | 733 ---------- arch/arm/mach-ep93xx/core.c | 1017 -------------- arch/arm/mach-ep93xx/dma.c | 114 -- arch/arm/mach-ep93xx/edb93xx.c | 344 ----- arch/arm/mach-ep93xx/ep93xx-regs.h | 38 - arch/arm/mach-ep93xx/gpio-ep93xx.h | 111 -- arch/arm/mach-ep93xx/hardware.h | 25 - arch/arm/mach-ep93xx/irqs.h | 76 - arch/arm/mach-ep93xx/platform.h | 42 - arch/arm/mach-ep93xx/soc.h | 212 --- arch/arm/mach-ep93xx/ts72xx.c | 422 ------ arch/arm/mach-ep93xx/ts72xx.h | 94 -- arch/arm/mach-ep93xx/vision_ep9307.c | 311 ----- drivers/ata/pata_ep93xx.c | 49 +- drivers/clk/Kconfig | 8 + drivers/clk/Makefile | 1 + drivers/clk/clk-ep93xx.c | 764 +++++++++++ drivers/clocksource/Kconfig | 11 + drivers/clocksource/Makefile | 1 + .../clocksource}/timer-ep93xx.c | 155 ++- drivers/dma/ep93xx_dma.c | 131 +- drivers/gpio/gpio-ep93xx.c | 332 ++--- drivers/input/keyboard/ep93xx_keypad.c | 74 +- drivers/mtd/nand/raw/Kconfig | 7 + drivers/mtd/nand/raw/Makefile | 1 + drivers/mtd/nand/raw/technologic-nand-controller.c | 162 +++ drivers/net/ethernet/cirrus/ep93xx_eth.c | 61 +- drivers/pinctrl/Kconfig | 7 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-ep93xx.c | 1447 ++++++++++++++++++++ drivers/power/reset/Kconfig | 10 + drivers/power/reset/Makefile | 1 + drivers/power/reset/ep93xx-restart.c | 86 ++ drivers/pwm/pwm-ep93xx.c | 26 +- drivers/rtc/rtc-ep93xx.c | 8 + drivers/rtc/rtc-m48t86.c | 8 + drivers/soc/Kconfig | 1 + drivers/soc/Makefile | 1 + drivers/soc/cirrus/Kconfig | 12 + drivers/soc/cirrus/Makefile | 2 + drivers/soc/cirrus/soc-ep93xx.c | 231 ++++ drivers/spi/spi-ep93xx.c | 28 +- drivers/watchdog/ep93xx_wdt.c | 8 + drivers/watchdog/ts72xx_wdt.c | 8 + include/dt-bindings/clock/cirrus,ep93xx-clock.h | 41 + include/dt-bindings/dma/cirrus,ep93xx-dma.h | 26 + include/linux/platform_data/dma-ep93xx.h | 25 +- include/linux/platform_data/eth-ep93xx.h | 10 - include/linux/platform_data/keypad-ep93xx.h | 32 - include/linux/soc/cirrus/ep93xx.h | 33 +- sound/soc/cirrus/Kconfig | 9 - sound/soc/cirrus/Makefile | 4 - sound/soc/cirrus/edb93xx.c | 117 -- 78 files changed, 5205 insertions(+), 4174 deletions(-) --- base-commit: ccff6d117d8dc8d8d86e8695a75e5f8b01e573bf change-id: 20230605-ep93xx-01c76317e2d2 Best regards, -- Nikita Shubin <nikita.shubin(a)maquefel.me>

15 90

[PATCH v2 1/2] ALSA: docs: Add Marian M2 driver documentation
by Ivan Orlov 05 Nov '23

05 Nov '23

Add documentation for the new MARIAN Seraph M2 sound card. It covers current development status, available controls of the card and information about the integrated loopback. Signed-off-by: Ivan Orlov <ivan.orlov0322(a)gmail.com> --- V1 -> V2: - Remove redundant documentation fix from the next patch in the series Documentation/sound/cards/index.rst | 1 + Documentation/sound/cards/marian-m2.rst | 104 ++++++++++++++++++++++++ 2 files changed, 105 insertions(+) create mode 100644 Documentation/sound/cards/marian-m2.rst diff --git a/Documentation/sound/cards/index.rst b/Documentation/sound/cards/index.rst index e68bbb13c384..e873592d8d00 100644 --- a/Documentation/sound/cards/index.rst +++ b/Documentation/sound/cards/index.rst @@ -19,3 +19,4 @@ Card-Specific Information serial-u16550 img-spdif-in pcmtest + marian-m2 diff --git a/Documentation/sound/cards/marian-m2.rst b/Documentation/sound/cards/marian-m2.rst new file mode 100644 index 000000000000..bf12445e20d7 --- /dev/null +++ b/Documentation/sound/cards/marian-m2.rst @@ -0,0 +1,104 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================= +MARIAN Seraph M2 Driver +======================= + +Sep 18, 2023 + +Ivan Orlov <ivan.orlov0322(a)gmail.com> + +STATE OF DEVELOPMENT +==================== + +This driver is based on the driver written by Florian Faber in 2012, which seemed to work fine. +However, the initial code contained multiple issues, which had to be solved before sending the +driver upstream. + +The vendor lost the full documentation, so what we have here was recovered from drafts and found +after experiments with the card. + +What seems to be working fine: +- Playback and capture for all supported rates +- Integrated loopback (with some exceptions, see below) + +MEMORY MODEL +============ + +The hardware requires one huge contiguous DMA space to be allocated. After allocation, the bus address of +this buffer should be written to the hardware register. + +We can split this space into two parts: the first one contains samples for capture, another one contains +play samples: + +CAPTURE_CH_0, CAPTURE_CH_1, ..., CAPTURE_CH_127 | PLAY_CH_0, PLAY_CH_1, ..., PLAY_CH_127 + +The card supports the non-interleaved access mode only, so samples for each channel lay together: + +C0, C0, ..., C0, C1, C1, ..., C1, ..., C127 | C0, C0, ..., C0, C1, C1, ..., C1, ..., C127 + +The count of samples per each channel buffer needs to be set explicitly, so the address of the first +byte of the playback data depends on this value. The playback buffer starts where the capture buffer ends. +It makes the arbitrary period count/buffer size feature impossible to implement, and the driver supports only +2 periods per buffer. + +Controls +======== + +Input 1 Sync + 0 - No signal, 1 - valid MADI signal found, 2 - Synced with MADI signal +Input 2 Sync + 0 - No signal, 1 - valid MADI signal found, 2 - Synced with MADI signal + +Input 1 Channel Mode + 0 - 56 channels, 1 - 64 channels +Input 2 Channel Mode + 0 - 56 channels, 1 - 64 channels + +Input 1 Frame Mode + 0 - 48 kHz, 1 - 96 kHz +Input 2 Frame Mode + 0 - 48 kHz, 1 - 96 kHz + +Input 1 Frequency + Measured frequency on Input 1 +Input 2 Frequency + Measured frequency on Input 2 + +Output 1 Channel Mode + 0 - 56 channels, 1 - 64 channels +Output 2 Channel Mode + 0 - 56 channels, 1 - 64 channels + +Output 1 Frame Mode + 0 - 48 kHz, 1 - 96 kHz +Output 2 Frame Mode + 0 - 48 kHz, 1 - 96 kHz + +Clock Source + Internal/Sync Bus, Input Port 1, Input Port 2 + +Speed mode + VCO clock range (slow/fast) + +DCO Frequency (Hz) + +DCO Frequency (ms) + +DCO Detune + Range: -200...200 + +Loopback + Enable/Disable integrated loopback + + +Loopback +======== + +The card contains integrated loopback. When it is enabled, it sets the hardware’s DAW-in memory pointer +to the hardware’s DAW-out memory. So, what you play is what you record. + +You can enable the integrated loopback using the corresponding control. + +The loopback seems to work well on lower rates (like 28000). However, when the rate goes higher, I observe +multiple mistakes in recorded byte ordering. -- 2.34.1

5 12

Re: RFC: usb: gadget: u_audio: Notifying gadget that host started playback/capture?
by Pavel Hofman 30 Oct '23

30 Oct '23

Hi, Dne 08. 09. 21 v 10:21 Pavel Hofman napsal(a): > Hi, > > The current audio gadget has no way to inform the gadget side that the > host side has started playback/capture and that gadget-side alsa > processes should be started. > > Playback/capture processes on the host side do not get stuck without the > gadget side consuming/producing data (OUT requests are ignored in > u_audio_iso_complete, IN ones send initial zeros in their req->buf). > > However, playback/capture processes on the gadget side get stuck without > the host side sending playback OUT packets or capture IN requests and > time out with error. If there was a way to inform the gadget side that > playback/capture has started on the host side, the gadget clients could > react accordingly. > I drafted a simple patch for u_audio.c which defines read-only boolean ctl elems "Capture Requested" and "Playback Requested". Their values are set/reset in methods u_audio_start_capture/playback and u_audio_stop_capture/playback, i.e. at changes of respective altsettings from 0 to 1 and back. Every ctl elem value change sends notification via snd_ctl_notify. The principle works OK for capture/playback start/stop on the host, as monitored by alsactl: pi@raspberrypi:~ $ alsactl monitor hw:UAC2Gadget node hw:UAC2Gadget, #4 (3,0,0,Capture Requested,0) VALUE node hw:UAC2Gadget, #4 (3,0,0,Capture Requested,0) VALUE node hw:UAC2Gadget, #3 (3,0,0,Playback Requested,0) VALUE node hw:UAC2Gadget, #3 (3,0,0,Playback Requested,0) VALUE However at enumeration the USB host switches both playback and capture altsettings repeatedly, generating "fake" events from the gadget side POW. The host even sends regular-sized EP-OUT packets filled with zeros during enumeration (tested on linux only for now). Please is there any way to "detect" the enumeration stage to mask out the "fake" playback/capture start/stop events? The attached patch does not apply cleanly to mainline u_audio.c because it's rebased on other patches not submitted yet but it's only a discussion inducer for now. Thanks a lot, Pavel.

2 6

[PATCH] patch_realtek: Splitting the UX3402 into two separate models.
by poseaydone＠ya.ru 28 Oct '23

28 Oct '23

From: Knyazev Arseniy <poseaydone(a)ya.ru> UX3402VA and UX3402ZA models require different hex values, so comibining them into one model is incorrect. Signed-off-by: Knyazev Arseniy <poseaydone(a)ya.ru> --- sound/pci/hda/patch_realtek.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index b7e78bfcffd8..b002f947b0d2 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9812,7 +9812,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1d1f, "ASUS ROG Strix G17 2023 (G713PV)", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x1043, 0x1d42, "ASUS Zephyrus G14 2022", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1d4e, "ASUS TM420", ALC256_FIXUP_ASUS_HPE), - SND_PCI_QUIRK(0x1043, 0x1e02, "ASUS UX3402", ALC245_FIXUP_CS35L41_SPI_2), + SND_PCI_QUIRK(0x1043, 0x1e02, "ASUS UX3402ZA", ALC245_FIXUP_CS35L41_SPI_2), + SND_PCI_QUIRK(0x1043, 0x16a3, "ASUS UX3402VA", ALC245_FIXUP_CS35L41_SPI_2), SND_PCI_QUIRK(0x1043, 0x1e11, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA502), SND_PCI_QUIRK(0x1043, 0x1e12, "ASUS UM3402", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x1043, 0x1e51, "ASUS Zephyrus M15", ALC294_FIXUP_ASUS_GU502_PINS), -- 2.42.0

3 2

[PATCH 0/4] ASoC: qcom: fixes for Click/Pop Noise
by Srinivas Kandagatla 27 Oct '23

27 Oct '23

Click/Pop Noise was a long pending issue with WSA Codecs which are prone to accumlate DC when ports are active but without any data streams. There are multiple places in the current setup, where this could happen in both startup as well as shutdown path. This patches help fix those issues by making sure the PA is Muted/Unmuted inline with the stream start/stop events. Other than this there is a patch to fix DSP graph saturation issue as we never unload playback graph before loading same graph. Srinivas Kandagatla (4): ASoC: qcom: q6apm-lpass-dai: close graphs before opening a new one ASoC: qcom: sdw: do not restart soundwire ports for every prepare ASoC: codecs: wsa883x: mute/unmute PA in correct sequence ASoC: codecs: wsa881x: mute/unmute PA in correct sequence sound/soc/codecs/wsa881x.c | 30 ++++++++++++++++++++- sound/soc/codecs/wsa883x.c | 36 ++++++++++++++++++++----- sound/soc/qcom/qdsp6/q6apm-lpass-dais.c | 3 +++ sound/soc/qcom/sdw.c | 7 ++--- 4 files changed, 63 insertions(+), 13 deletions(-) -- 2.21.0

4 16

[alsa-devel] echo-cancellation plugin advice?
by Max Klein 27 Oct '23

27 Oct '23

> Well, asym wouldn't be the answer. Basically you'll need to open two > slave PCMs in one plugin. So, it's no simple filter-type plugin. > It's doable, but not easy as it sounds, I guess. Takashi, can you please further explain why asym is not the solution and what you see as a problem? I am also trying to figure out if it would be possible to create such a plugin for ALSA? I am still searching for some good starting points on how to write an ALSA plugin... Jean-Marc Valin (http://lists.linuxaudio.org/pipermail/linux-audio-dev/2005-June/012454.html) already released his work as part of speex but as far I know there is no plugin that has been made out of it? Thanks for any hint! -- NEU: FreePhone 3-fach-Flat mit kostenlosem Smartphone! Jetzt informieren: http://mobile.1und1.de/?ac=OM.PW.PW003K20328T7073a

3 2

[PATCH 0/3] ARM: omap4: embt2ws: Add audio support
by Andreas Kemnade 25 Oct '23

25 Oct '23

Add audio support for Epson Moverio BT-200. In the vendor kernel, the MCBSP side is used as master, so do it here also that way. Andreas Kemnade (3): ASoC: ti: omap-mcbsp: Ignore errors for getting fck_src ASoC: tlv320aic3x: use BCLK instead of MCLK if not in master mode ARM: dts: omap4: embt2ws: Add audio support arch/arm/boot/dts/omap4-epson-embt2ws.dts | 21 +++++++++++++++++++++ sound/soc/codecs/tlv320aic3x.c | 4 ++++ sound/soc/ti/omap-mcbsp.c | 4 ++-- 3 files changed, 27 insertions(+), 2 deletions(-) -- 2.39.2

4 28

[PATCH v4 00/42] ep93xx device tree conversion
by Nikita Shubin via B4 Relay 15 Oct '23

15 Oct '23

This series aims to convert ep93xx from platform to full device tree support. The main goal is to receive ACK's to take it via Arnd's arm-soc branch. Major changes: - drop newline at the end from each YAML files - rename dma and clk bindings headers to match first compatible - shrink SoC exported functions number to only 2 - dropped some ep93xx_pata fixes from these series - dropped m48t86 stuff from these series Bit thanks to Andy Shevchenko for thorough review. Some parts are were sent in advance, so these series depends on the following: Link: https://lore.kernel.org/all/20230823-m48t86_device_tree-v2-0-21ff275f949d@m… Link: https://lore.kernel.org/all/20230823-ep93xx_pata_fixes-v1-0-d7e7229be148@ma… --- Changes in v4: - gpio: ep93xx: split device in multiple - s/generic_handle_irq/generic_handle_domain_irq/ - s/int offset/irq_hw_number_t offset/ though now it looks a bit odd to me - drop i = 0 - drop 'error' - use dev_err_probe withour printing devname once again dt-bindings: clock: Add Cirrus EP93xx - renamed cirrus,ep93xx-clock.h -> cirrus,ep9301-clk.h clk: ep93xx: add DT support for Cirrus EP93xx - drop unused includes - use .name only for xtali, pll1, pll2 parents - convert // to /* - pass clk_parent_data instead of char* clock name dt-bindings: pinctrl: Add Cirrus EP93xx - s/additionalProperties/unevaluatedProperties/ dt-bindings: soc: Add Cirrus EP93xx - move syscon to soc directory - add vendor prefix - make reboot same style as pinctrl, clk - use absolute path for ref - expand example soc: Add SoC driver for Cirrus ep93xx - s/0xf0000000/GENMASK(31, 28)/ - s/ret/ep93xx_chip_revision(map)/ - drop symbol exports - convert to platform driver dt-bindings: rtc: Add Cirrus EP93xx - allOf: with $ref to rtc.yaml - s/additionalProperties/unevaluatedProperties/ dt-bindings: watchdog: Add Cirrus EP93x - drop description - reword power: reset: Add a driver for the ep93xx reset - lets use 'GPL-2.0+' instead of '(GPL-2.0)' - s/of_device/of/ - drop mdelay with warning - return 0 at the end net: cirrus: add DT support for Cirrus EP93xx - fix leaking np mtd: nand: add support for ts72xx - +bits.h - drop comment - ok to fwnode_get_next_child_node - use goto to put handle and nand and report error ARM: dts: add Cirrus EP93XX SoC .dtsi - add simple-bus for ebi, as we don't require to setup anything - add arm,pl011 compatible to uart nodes - drop i2c-gpio, as it's isn't used anywhere ARM: dts: ep93xx: add ts7250 board - generic node name for temperature-sensor - drop i2c - move nand, rtc, watchdog to ebi node - Link to v3: https://lore.kernel.org/r/20230605-ep93xx-v3-0-3d63a5f1103e@maquefel.me --- Alexander Sverdlin (2): ARM: dts: ep93xx: Add EDB9302 DT ASoC: cirrus: edb93xx: Delete driver Nikita Shubin (40): gpio: ep93xx: split device in multiple ARM: ep93xx: add swlocked prototypes dt-bindings: clock: Add Cirrus EP93xx clk: ep93xx: add DT support for Cirrus EP93xx dt-bindings: pinctrl: Add Cirrus EP93xx pinctrl: add a Cirrus ep93xx SoC pin controller dt-bindings: power: reset: Add ep93xx reset power: reset: Add a driver for the ep93xx reset dt-bindings: soc: Add Cirrus EP93xx soc: Add SoC driver for Cirrus ep93xx dt-bindings: timers: Add Cirrus EP93xx clocksource: ep93xx: Add driver for Cirrus Logic EP93xx dt-bindings: rtc: Add Cirrus EP93xx rtc: ep93xx: add DT support for Cirrus EP93xx dt-bindings: watchdog: Add Cirrus EP93x watchdog: ep93xx: add DT support for Cirrus EP93xx dt-bindings: pwm: Add Cirrus EP93xx pwm: ep93xx: add DT support for Cirrus EP93xx dt-bindings: spi: Add Cirrus EP93xx spi: ep93xx: add DT support for Cirrus EP93xx dt-bindings: net: Add Cirrus EP93xx net: cirrus: add DT support for Cirrus EP93xx dt-bindings: dma: Add Cirrus EP93xx dma: cirrus: add DT support for Cirrus EP93xx dt-bindings: mtd: Add ts7200 nand-controller mtd: nand: add support for ts72xx dt-bindings: ata: Add Cirrus EP93xx ata: pata_ep93xx: add device tree support dt-bindings: input: Add Cirrus EP93xx keypad input: keypad: ep93xx: add DT support for Cirrus EP93xx dt-bindings: wdt: Add ts72xx wdt: ts72xx: add DT support for ts72xx gpio: ep93xx: add DT support for gpio-ep93xx ARM: dts: add Cirrus EP93XX SoC .dtsi ARM: dts: ep93xx: add ts7250 board ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms pwm: ep93xx: drop legacy pinctrl ata: pata_ep93xx: remove legacy pinctrl use ARM: ep93xx: delete all boardfiles ARM: ep93xx: soc: drop defines .../bindings/arm/cirrus/cirrus,ep9301.yaml | 38 + .../bindings/ata/cirrus,ep9312-pata.yaml | 42 + .../bindings/clock/cirrus,ep9301-clk.yaml | 46 + .../bindings/dma/cirrus,ep9301-dma-m2m.yaml | 69 + .../bindings/dma/cirrus,ep9301-dma-m2p.yaml | 121 ++ .../bindings/input/cirrus,ep9307-keypad.yaml | 87 ++ .../devicetree/bindings/mtd/technologic,nand.yaml | 45 + .../devicetree/bindings/net/cirrus,ep9301-eth.yaml | 59 + .../bindings/pinctrl/cirrus,ep9301-pinctrl.yaml | 57 + .../bindings/power/reset/cirrus,ep9301-reboot.yaml | 34 + .../devicetree/bindings/pwm/cirrus,ep9301-pwm.yaml | 46 + .../devicetree/bindings/rtc/cirrus,ep9301-rtc.yaml | 42 + .../bindings/soc/cirrus/cirrus,ep9301-syscon.yaml | 71 + .../devicetree/bindings/spi/cirrus,ep9301-spi.yaml | 61 + .../bindings/timer/cirrus,ep9301-timer.yaml | 49 + .../bindings/watchdog/cirrus,ep9301-wdt.yaml | 42 + .../bindings/watchdog/technologic,ts7200-wdt.yaml | 45 + arch/arm/Makefile | 1 - arch/arm/boot/dts/cirrus/Makefile | 4 + arch/arm/boot/dts/cirrus/ep93xx-bk3.dts | 124 ++ arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts | 180 +++ arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts | 143 ++ arch/arm/boot/dts/cirrus/ep93xx.dtsi | 454 +++++++ arch/arm/mach-ep93xx/Kconfig | 20 +- arch/arm/mach-ep93xx/Makefile | 11 - arch/arm/mach-ep93xx/clock.c | 733 ---------- arch/arm/mach-ep93xx/core.c | 1017 -------------- arch/arm/mach-ep93xx/dma.c | 114 -- arch/arm/mach-ep93xx/edb93xx.c | 344 ----- arch/arm/mach-ep93xx/ep93xx-regs.h | 38 - arch/arm/mach-ep93xx/gpio-ep93xx.h | 111 -- arch/arm/mach-ep93xx/hardware.h | 25 - arch/arm/mach-ep93xx/irqs.h | 76 -- arch/arm/mach-ep93xx/platform.h | 42 - arch/arm/mach-ep93xx/soc.h | 212 --- arch/arm/mach-ep93xx/ts72xx.c | 422 ------ arch/arm/mach-ep93xx/ts72xx.h | 94 -- arch/arm/mach-ep93xx/vision_ep9307.c | 311 ----- drivers/ata/pata_ep93xx.c | 33 +- drivers/clk/Kconfig | 8 + drivers/clk/Makefile | 1 + drivers/clk/clk-ep93xx.c | 753 +++++++++++ drivers/clocksource/Kconfig | 11 + drivers/clocksource/Makefile | 1 + .../clocksource}/timer-ep93xx.c | 155 ++- drivers/dma/ep93xx_dma.c | 125 +- drivers/gpio/gpio-ep93xx.c | 331 ++--- drivers/input/keyboard/ep93xx_keypad.c | 74 +- drivers/mtd/nand/raw/Kconfig | 7 + drivers/mtd/nand/raw/Makefile | 1 + drivers/mtd/nand/raw/technologic-nand-controller.c | 166 +++ drivers/net/ethernet/cirrus/ep93xx_eth.c | 63 +- drivers/pinctrl/Kconfig | 7 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-ep93xx.c | 1429 ++++++++++++++++++++ drivers/power/reset/Kconfig | 10 + drivers/power/reset/Makefile | 1 + drivers/power/reset/ep93xx-restart.c | 85 ++ drivers/pwm/pwm-ep93xx.c | 26 +- drivers/rtc/rtc-ep93xx.c | 8 + drivers/soc/Kconfig | 1 + drivers/soc/Makefile | 1 + drivers/soc/cirrus/Kconfig | 12 + drivers/soc/cirrus/Makefile | 2 + drivers/soc/cirrus/soc-ep93xx.c | 215 +++ drivers/spi/spi-ep93xx.c | 28 +- drivers/watchdog/ep93xx_wdt.c | 8 + drivers/watchdog/ts72xx_wdt.c | 8 + include/dt-bindings/clock/cirrus,ep9301-clk.h | 41 + include/dt-bindings/dma/cirrus,ep93xx-dma.h | 26 + include/linux/platform_data/dma-ep93xx.h | 25 +- include/linux/platform_data/eth-ep93xx.h | 10 - include/linux/platform_data/keypad-ep93xx.h | 32 - include/linux/soc/cirrus/ep93xx.h | 29 +- sound/soc/cirrus/Kconfig | 9 - sound/soc/cirrus/Makefile | 4 - sound/soc/cirrus/edb93xx.c | 117 -- 77 files changed, 5126 insertions(+), 4168 deletions(-) --- base-commit: bdc09c8e8b16d494ccd1c56e903e78dd76455a35 change-id: 20230605-ep93xx-01c76317e2d2 Best regards, -- Nikita Shubin <nikita.shubin(a)maquefel.me>

4 4

[PATCH] ASoC: apple: mca: Annotate struct mca_data with __counted_by
by Kees Cook 11 Oct '23

11 Oct '23

Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct mca_data. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted… Cc: "Martin Povišer" <povik+lin(a)cutebit.org> Cc: Liam Girdwood <lgirdwood(a)gmail.com> Cc: Mark Brown <broonie(a)kernel.org> Cc: Jaroslav Kysela <perex(a)perex.cz> Cc: Takashi Iwai <tiwai(a)suse.com> Cc: asahi(a)lists.linux.dev Cc: alsa-devel(a)alsa-project.org Signed-off-by: Kees Cook <keescook(a)chromium.org> --- sound/soc/apple/mca.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/apple/mca.c b/sound/soc/apple/mca.c index ce77934f3eef..99e547ef95e6 100644 --- a/sound/soc/apple/mca.c +++ b/sound/soc/apple/mca.c @@ -161,7 +161,7 @@ struct mca_data { struct mutex port_mutex; int nclusters; - struct mca_cluster clusters[]; + struct mca_cluster clusters[] __counted_by(nclusters); }; static void mca_modify(struct mca_cluster *cl, int regoffset, u32 mask, u32 val) -- 2.34.1

3 7

[PATCH v7 00/30] Add support for QMC HDLC, framer infrastructure and PEF2256 framer
by Herve Codina 10 Oct '23

10 Oct '23

Hi, I have a system where I need to handle an HDLC interface and some audio data. The HDLC data are transferred using a TDM bus on which a PEF2256 (E1/T1 framer) is present. The PEF2256 transfers data from/to the TDM bus to/from the E1 line. This PEF2256 is connected to a PowerQUICC SoC for the control path and the TDM is connected to the SoC (QMC component) for the data path. From the QMC HDLC driver, I need to handle HDLC data using the QMC, carrier detection using the PEF2256 (E1 line carrier) and set/get some PEF2256 configuration. The QMC HDLC driver considers the PEF2256 as a generic framer. It performs operations that involve the PEF2256 through the generic framer API. The audio data are exchanged with the PEF2256 using a CPU DAI connected to the TDM bus through the QMC and the PEF2256 needs to be seen as a codec in order to be linked to the CPU DAI. The codec handles the carrier detection using the PEF2256 and reports the carrier state to the ALSA subsystem using the ASoC jack detection. The codec, even if instantiated by the PEF2256 driver, considers the PEF2256 as a generic framer. The generic framer has: - 2 consumers (QMC HDLC drv and codec) - 1 provider (PEF2256) So, the design is the following: +------------------+ +---------+ | QMC | <- TDM -> | PEF2256 | <-> E1 +---------+ | +-------------+ | | | | CPU DAI | <-data--> | QMC channel | | | | +---------+ | +-------------+ | | | +--------------+ | +-------------+ | | | | QMC HDLC drv | <-data--> | QMC channel | | | | +--------------+ | +-------------+ | | | ^ +------------------+ | | | +--------+ +-------------+ | | +-> | framer | <-> | PEF2256 drv | <- local bus ->| | | | | | +---------+ +-> | | | | | +--------+ | +-------+ | +-------------------> | codec | | | +-------+ | +-------------+ Further more, the TDM timeslots used by the QMC HDLC driver need to be configured at runtime (QMC dynamic timeslots). Several weeks ago, I sent two series related to this topic: - Add the Lantiq PEF2256 audio support [1] - RFC Add support for QMC HDLC and PHY [2] This current series is a rework of these two series taking into account feedbacks previously received. In order to implement all of this, I do the following: 1) Perform some fixes (patches 1, 2, 3, 4, 5, 6, 7) 2) Introduce the QMC HDLC driver (patches 8, 9, 10, 11) 3) Add QMC dynamic timeslot support (patches 12 - 22) 4) Add timeslots change support in QMC HDLC (patch 23) 5) Introduce framer infrastructure (patch 24) 6) Add PEF2256 framer provider (patches 25, 26, 27, 28) 7) Add framer codec as a framer consumer (patch 29) 8) Add framer support as a framer consumer in QMC HDLC (patch 30) The series contains the full story and detailed modifications. If needed, the series can be split and/or commits can be squashed. Let me know. Compare to the previous iteration https://lore.kernel.org/linux-kernel/20230922075913.422435-1-herve.codina@b… This v7 series: - Fixes the framer binding removing the '$ref'. commit 033d0b1 ("Add '-bps' as a standard unit suffix for bits per second") was recently added in https://github.com/devicetree-org/dt-schema/ Even if not yet present in an dt-schema release, '-bps' is an official standard suffix and so '$ref' is no more needed. - Fixes the QMC channel binding. Best regards, Hervé [1]: https://lore.kernel.org/all/20230417171601.74656-1-herve.codina@bootlin.com/ [2]: https://lore.kernel.org/all/20230323103154.264546-1-herve.codina@bootlin.co… Changes v6 -> v7 - Patch 8 Move the 'compatible' property to the first property. Add device/SoC specific compatible strings. Add 'Reviewed-by: Rob Herring <robh(a)kernel.org>' - Patch 25 Remove '$ref' from the lantiq,data-rate-bps property. '-bps' is now a standard suffix. Changes v5 -> v6 - All patches Remove 'Signed-off-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' These Sob were added by Christophe when he sent the v4 while I was on vacation. https://lore.kernel.org/linux-kernel/992a2b31-e21f-eee3-8bfc-a65b69fe5bd7@c… - Patch 6, 7 Add 'Acked-by: Conor Dooley <conor.dooley(a)microchip.com>' Add 'Acked-by: Rob Herring <robh(a)kernel.org>' - Patch 8 Add a constraint on fsl,framer. - Patch 25 Fix clocks description (inconsistent capitalisation) Use '8-bit' instead of '8bit' Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Removed patch 26 (patch applied) - Patch 26 (patch 27 in v5) Add 'Reviewed-by: Linus Walleij <linus.walleij(a)linaro.org>' - Patch 27 (patch 28 in v5) Move registers definition to .c file and remove .h file Add 'select PINCONF' in Kconfig Use dev_err_probe() Add 'Reviewed-by: Linus Walleij <linus.walleij(a)linaro.org>' - Patch 28 (patch 29 in v5) Remove .h file Changes v4 -> v5 - Patches 1 to 5 No changes - Patch 6 (new in v5) Fix QMC binding example - Patch 7 (new in v5) Add missing 'additionalProperties: false' - Patch 8 (new in v5, replace v4 patch 6) Add QMC HDLC properties in the QMC channel node Renamed the 'framer' property to 'fsl,framer' - Patch 9 (new in v5) Add support for QMC child devices - Patch 10 (patch 7 in v4) No changes - Patch 11 (patch 8 in v4) Remove fsl,qmc-hdlc.yaml (no more existing file) - Patches 12 to 22 (patches 9 to 19 in v4) No changes - Patch 23 (patch 20 in v4) Remove unused variable initializations Remove extra space - Patch 24 (patch 21 in v4) Improve Kconfig help text Fix variable declaration (reverse xmas tree) Fix typos and extra spaces Fix documentation issues raised by 'kernel-doc -none' Move of_node_put() and kfree() out of the mutex Replace ida_simple_{get,remove}() by ida_{alloc,free}() Support framer device-tree nodes without '#framer-cells' property - Patch 25 (patch 22 in v4) Fix $ref in the pinctrl subnode Remove '#framer-cells' property Add needed '|' - Patch 26 (patch 23 in v4) Fix a typo in the commit subject - Patches 27, 28, 29 (patch 24, 25, 26 in v4) No changes - Patch 30 (patch 27 in v4) Fix a typo in the commit log - Patch 31 (patch 28 in v4) Used 'fsl,framer' property name instead of 'framer' Changes v3 -> v4 - Patch 21 Fixes build failure with CONFIG_MODULES Changes v2 -> v3 - Patches 1, 2, 3, 4 Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - New patch Remove inline keyword from the existing registers accessors helpers - Patch 6 (patches 5, 27 in v2) Update the binding title Squash patch 27 - Patch 7 (patch 6 in v2) Remove the cast in netdev_to_qmc_hdlc() Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Patch 8 (patch 7 in v2): No change - Patches 9, 10 (patches 8, 9 in v2) Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Patch 11 (patch 10 in v2) Remove inline keyword from the introduced qmc_clrsetbits16() helper Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Patches 12, 13, 14, 15, 16, 17, 18, 19, 20 Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Patch 21 (patch 20 in v2) Remove unneeded framer NULL pointer check Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Patch 22 (patch 21 in v2) Change sclkr and sclkx clocks description Remove the framer phandle property from the framer subnodes (ie. from framer-codec nodes) - Patch 23 (patch 22 in v2) Initialize 'disabled' variable at declaration Fix commit log Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Patch 24 (patch 23 in v2) Remove inline keyword from the existing registers accessors helpers Use dev_warn_ratelimited() in default interrupt handler Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Patch 25 (patch 24 in v2) Replace #include "linux/bitfield.h" by #include <linux/bitfield.h> Fold the pinctrl anonymous struct into the struct pef2256_pinctrl Update commit log Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Patch 26 (patch 25 in v2) Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Patch 27 (patch 26 in v2) Fix error message Changed the ch.max computation in framer_dai_hw_rule_channels_by_format() Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Patch 28 Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' Changes v1 -> v2 - Patches 1, 2 (New in v2) Fix __iomem addresses declaration - Patch 19 (17 in v1) Fix a compilation warning - Patch 26 (24 in v1) Fix a typo in Kconfig file Fix issues raised by sparse (make C=1) Herve Codina (30): soc: fsl: cpm1: tsa: Fix __iomem addresses declaration soc: fsl: cpm1: qmc: Fix __iomem addresses declaration soc: fsl: cpm1: qmc: Fix rx channel reset soc: fsl: cpm1: qmc: Extend the API to provide Rx status soc: fsl: cpm1: qmc: Remove inline function specifiers dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Fix example property name dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Add 'additionalProperties: false' in child nodes dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Add support for QMC HDLC soc: fsl: cpm1: qmc: Add support for child devices net: wan: Add support for QMC HDLC MAINTAINERS: Add the Freescale QMC HDLC driver entry soc: fsl: cpm1: qmc: Introduce available timeslots masks soc: fsl: cpm1: qmc: Rename qmc_setup_tsa* to qmc_init_tsa* soc: fsl: cpm1: qmc: Introduce qmc_chan_setup_tsa* soc: fsl: cpm1: qmc: Remove no more needed checks from qmc_check_chans() soc: fsl: cpm1: qmc: Check available timeslots in qmc_check_chans() soc: fsl: cpm1: qmc: Add support for disabling channel TSA entries soc: fsl: cpm1: qmc: Split Tx and Rx TSA entries setup soc: fsl: cpm1: qmc: Introduce is_tsa_64rxtx flag soc: fsl: cpm1: qmc: Handle timeslot entries at channel start() and stop() soc: fsl: cpm1: qmc: Remove timeslots handling from setup_chan() soc: fsl: cpm1: qmc: Introduce functions to change timeslots at runtime wan: qmc_hdlc: Add runtime timeslots changes support net: wan: Add framer framework support dt-bindings: net: Add the Lantiq PEF2256 E1/T1/J1 framer net: wan: framer: Add support for the Lantiq PEF2256 framer pinctrl: Add support for the Lantic PEF2256 pinmux MAINTAINERS: Add the Lantiq PEF2256 driver entry ASoC: codecs: Add support for the framer codec net: wan: fsl_qmc_hdlc: Add framer support .../bindings/net/lantiq,pef2256.yaml | 213 +++++ .../soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml | 37 +- MAINTAINERS | 15 + drivers/net/wan/Kconfig | 14 + drivers/net/wan/Makefile | 3 + drivers/net/wan/framer/Kconfig | 39 + drivers/net/wan/framer/Makefile | 7 + drivers/net/wan/framer/framer-core.c | 887 ++++++++++++++++++ drivers/net/wan/framer/pef2256/Makefile | 8 + drivers/net/wan/framer/pef2256/pef2256-regs.h | 250 +++++ drivers/net/wan/framer/pef2256/pef2256.c | 880 +++++++++++++++++ drivers/net/wan/fsl_qmc_hdlc.c | 820 ++++++++++++++++ drivers/pinctrl/Kconfig | 15 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-pef2256.c | 358 +++++++ drivers/soc/fsl/qe/qmc.c | 592 +++++++++--- drivers/soc/fsl/qe/tsa.c | 22 +- include/linux/framer/framer-provider.h | 194 ++++ include/linux/framer/framer.h | 205 ++++ include/linux/framer/pef2256.h | 31 + include/soc/fsl/qe/qmc.h | 27 +- sound/soc/codecs/Kconfig | 15 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/framer-codec.c | 413 ++++++++ sound/soc/fsl/fsl_qmc_audio.c | 2 +- 25 files changed, 4910 insertions(+), 140 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/lantiq,pef2256.yaml create mode 100644 drivers/net/wan/framer/Kconfig create mode 100644 drivers/net/wan/framer/Makefile create mode 100644 drivers/net/wan/framer/framer-core.c create mode 100644 drivers/net/wan/framer/pef2256/Makefile create mode 100644 drivers/net/wan/framer/pef2256/pef2256-regs.h create mode 100644 drivers/net/wan/framer/pef2256/pef2256.c create mode 100644 drivers/net/wan/fsl_qmc_hdlc.c create mode 100644 drivers/pinctrl/pinctrl-pef2256.c create mode 100644 include/linux/framer/framer-provider.h create mode 100644 include/linux/framer/framer.h create mode 100644 include/linux/framer/pef2256.h create mode 100644 sound/soc/codecs/framer-codec.c -- 2.41.0

4 39