March 2023 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] echo-cancellation plugin advice?
by Max Klein 27 Oct '23

27 Oct '23

> Well, asym wouldn't be the answer. Basically you'll need to open two > slave PCMs in one plugin. So, it's no simple filter-type plugin. > It's doable, but not easy as it sounds, I guess. Takashi, can you please further explain why asym is not the solution and what you see as a problem? I am also trying to figure out if it would be possible to create such a plugin for ALSA? I am still searching for some good starting points on how to write an ALSA plugin... Jean-Marc Valin (http://lists.linuxaudio.org/pipermail/linux-audio-dev/2005-June/012454.html) already released his work as part of speex but as far I know there is no plugin that has been made out of it? Thanks for any hint! -- NEU: FreePhone 3-fach-Flat mit kostenlosem Smartphone! Jetzt informieren: http://mobile.1und1.de/?ac=OM.PW.PW003K20328T7073a

3 2

[PATCH v3 00/28] Introduce QC USB SND audio offloading support
by Wesley Cheng 29 Aug '23

29 Aug '23

Changes in v3: - Changed prefix from RFC to PATCH - Rebased entire series to usb-next - Updated copyright years XHCI: - Rebased changes on top of XHCI changes merged into usb-next, and only added changes that were still under discussion. - Added change to read in the "num-hc-interrupters" device property. ASoC: - qusb6 USB backend - Incorporated suggestions to fetch iommu information with existing APIs - Added two new sound kcontrols to fetch offload status and offload device selection. - offload status - will return the card and pcm device in use tinymix -D 0 get 1 --> 1, 0 (offload in progress on card#1 pcm#0) - device selection - set the card and pcm device to enable offload on. Ex.: tinymix -D 0 set 1 2 0 --> sets offload on card#2 pcm#0 (this should be the USB card) USB SND: - Fixed up some locking related concerns for registering platform ops. - Moved callbacks under the register_mutex, so that - Modified APIs to properly pass more information about the USB SND device, so that the Q6USB backend can build a device list/map, in order to monitor offload status and device selection. Changes in v2: XHCI: - Replaced XHCI and HCD changes with Mathias' XHCI interrupter changes in his tree: https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/?h=feat… Adjustments made to Mathias' changes: - Created xhci-intr.h to export/expose interrupter APIs versus exposing xhci.h. Moved dependent structures to this file as well. (so clients can parse out information from "struct xhci_interrupter") - Added some basic locking when requesting interrupters. - Fixed up some sanity checks. - Removed clearing of the ERSTBA during freeing of the interrupter. (pending issue where SMMU fault occurs if DMA addr returned is 64b - TODO) - Clean up pending events in the XHCI secondary interrupter. While testing USB bus suspend, it was seen that on bus resume, the xHCI HC would run into a command timeout. - Added offloading APIs to xHCI to fetch transfer and event ring information. ASoC: - Modified soc-usb to allow for multiple USB port additions. For this to work, the USB offload driver has to have a reference to the USB backend by adding a "usb-soc-be" DT entry to the device saved into XHCI sysdev. - Created separate dt-bindings for defining USB_RX port. - Increased APR timeout to accommodate the situation where the AFE port start command could be delayed due to having to issue a USB bus resume while handling the QMI stream start command. USB SND: - Added a platform ops during usb_audio_suspend(). This allows for the USB offload driver to halt the audio stream when system enters PM suspend. This ensures the audio DSP is not issuing transfers on the USB bus. - Do not override platform ops if they are already populated. - Introduce a shared status variable between the USB offload and USB SND layers, to ensure that only one path is active at a time. If the USB bus is occupied, then userspace is notified that the path is busy. Several Qualcomm based chipsets can support USB audio offloading to a dedicated audio DSP, which can take over issuing transfers to the USB host controller. The intention is to reduce the load on the main processors in the SoC, and allow them to be placed into lower power modes. There are several parts to this design: 1. Adding ASoC binding layer 2. Create a USB backend for Q6DSP 3. Introduce XHCI interrupter support 4. Create vendor ops for the USB SND driver Adding ASoC binding layer: soc-usb: Intention is to treat a USB port similar to a headphone jack. The port is always present on the device, but cable/pin status can be enabled/disabled. Expose mechanisms for USB backend ASoC drivers to communicate with USB SND. Create a USB backend for Q6DSP: q6usb: Basic backend driver that will be responsible for maintaining the resources needed to initiate a playback stream using the Q6DSP. Will be the entity that checks to make sure the connected USB audio device supports the requested PCM format. If it does not, the PCM open call will fail, and userpsace ALSA can take action accordingly. Introduce XHCI interrupter support: XHCI HCD supports multiple interrupters, which allows for events to be routed to different event rings. This is determined by "Interrupter Target" field specified in Section "6.4.1.1 Normal TRB" of the XHCI specification. Events in the offloading case will be routed to an event ring that is assigned to the audio DSP. Create vendor ops for the USB SND driver: qc_audio_offload: This particular driver has several components associated with it: - QMI stream request handler - XHCI interrupter and resource management - audio DSP memory management When the audio DSP wants to enable a playback stream, the request is first received by the ASoC platform sound card. Depending on the selected route, ASoC will bring up the individual DAIs in the path. The Q6USB backend DAI will send an AFE port start command (with enabling the USB playback path), and the audio DSP will handle the request accordingly. Part of the AFE USB port start handling will have an exchange of control messages using the QMI protocol. The qc_audio_offload driver will populate the buffer information: - Event ring base address - EP transfer ring base address and pass it along to the audio DSP. All endpoint management will now be handed over to the DSP, and the main processor is not involved in transfers. Overall, implementing this feature will still expose separate sound card and PCM devices for both the platorm card and USB audio device: 0 [SM8250MTPWCD938]: sm8250 - SM8250-MTP-WCD9380-WSA8810-VA-D SM8250-MTP-WCD9380-WSA8810-VA-DMIC 1 [Audio ]: USB-Audio - USB Audio Generic USB Audio at usb-xhci-hcd.1.auto-1.4, high speed This is to ensure that userspace ALSA entities can decide which route to take when executing the audio playback. In the above, if card#1 is selected, then USB audio data will take the legacy path over the USB PCM drivers, etc... This feature was validated using: - tinymix: set/enable the multimedia path to route to USB backend - tinyplay: issue playback on platform card Mathias Nyman (1): xhci: Add support to allocate several interrupters Wesley Cheng (27): usb: xhci: Add XHCI APIs to support USB offloading usb: host: xhci-mem: Cleanup pending secondary event ring events ASoC: Add SOC USB APIs for adding an USB backend ASoC: dt-bindings: qcom,q6dsp-lpass-ports: Add USB_RX port ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp ASoC: qdsp6: q6afe: Increase APR timeout ASoC: qcom: Add USB backend ASoC driver for Q6 sound: usb: card: Introduce USB SND platform op callbacks sound: usb: Export USB SND APIs for modules dt-bindings: usb: dwc3: Add snps,num-hc-interrupters definition usb: dwc3: Add DT parameter to specify maximum number of interrupters usb: host: xhci-plat: Set XHCI max interrupters if property is present sound: usb: pcm: Export fixed rate check USB SND API sound: usb: Introduce QC USB SND offloading support sound: usb: card: Check for support for requested audio format sound: soc: soc-usb: Add PCM format check API for USB backend sound: soc: qcom: qusb6: Ensure PCM format is supported by USB audio device sound: usb: Prevent starting of audio stream if in use ASoC: dt-bindings: Add Q6USB backend bindings ASoC: dt-bindings: Update example for enabling USB offload on SM8250 ASoC: qcom: qdsp6: q6afe: Split USB AFE dev_token param into separate API sound: Pass USB SND card and PCM information to SOC USB sound: soc: qdsp6: Add SND kcontrol to select offload device sound: soc: qdsp6: Add SND kcontrol for fetching offload status sound: usb: qc_audio_offload: Use card and PCM index from QMI request sound: usb: card: Allow for rediscovery of connected USB SND devices sound: soc: soc-usb: Rediscover USB SND devices on USB port add .../bindings/sound/qcom,q6usb-dais.yaml | 49 + .../bindings/sound/qcom,sm8250.yaml | 15 + .../devicetree/bindings/usb/snps,dwc3.yaml | 13 + drivers/usb/dwc3/core.c | 12 + drivers/usb/dwc3/core.h | 2 + drivers/usb/dwc3/host.c | 5 +- drivers/usb/host/xhci-debugfs.c | 2 +- drivers/usb/host/xhci-mem.c | 171 +- drivers/usb/host/xhci-plat.c | 2 + drivers/usb/host/xhci-ring.c | 2 +- drivers/usb/host/xhci.c | 181 +- drivers/usb/host/xhci.h | 2 +- .../sound/qcom,q6dsp-lpass-ports.h | 1 + include/linux/usb/xhci-intr.h | 94 + include/sound/pcm_params.h | 4 + include/sound/q6usboffload.h | 20 + include/sound/soc-usb.h | 39 + sound/core/oss/pcm_oss.c | 58 - sound/core/pcm_lib.c | 65 + sound/soc/Makefile | 2 +- sound/soc/qcom/Kconfig | 4 + sound/soc/qcom/qdsp6/Makefile | 1 + sound/soc/qcom/qdsp6/q6afe-dai.c | 50 + sound/soc/qcom/qdsp6/q6afe.c | 208 +- sound/soc/qcom/qdsp6/q6afe.h | 47 +- sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c | 23 + sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h | 1 + sound/soc/qcom/qdsp6/q6routing.c | 9 + sound/soc/qcom/qdsp6/q6usb.c | 445 ++++ sound/soc/soc-usb.c | 197 ++ sound/usb/Kconfig | 14 + sound/usb/Makefile | 2 +- sound/usb/card.c | 85 + sound/usb/card.h | 31 + sound/usb/endpoint.c | 2 + sound/usb/helper.c | 1 + sound/usb/pcm.c | 29 +- sound/usb/pcm.h | 12 + sound/usb/qcom/Makefile | 2 + sound/usb/qcom/qc_audio_offload.c | 1790 +++++++++++++++++ sound/usb/qcom/usb_audio_qmi_v01.c | 892 ++++++++ sound/usb/qcom/usb_audio_qmi_v01.h | 162 ++ 42 files changed, 4646 insertions(+), 100 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6usb-dais.yaml create mode 100644 include/linux/usb/xhci-intr.h create mode 100644 include/sound/q6usboffload.h create mode 100644 include/sound/soc-usb.h create mode 100644 sound/soc/qcom/qdsp6/q6usb.c create mode 100644 sound/soc/soc-usb.c create mode 100644 sound/usb/qcom/Makefile create mode 100644 sound/usb/qcom/qc_audio_offload.c create mode 100644 sound/usb/qcom/usb_audio_qmi_v01.c create mode 100644 sound/usb/qcom/usb_audio_qmi_v01.h

12 80

[PATCH 0/4] ASoC: amd: acp: Add sound support for a line of HUAWEI laptops
by Marian Postevca 21 Aug '23

21 Aug '23

This series adds support for a line of HUAWEI laptops with AMD CPUs that connect using the ACP3x module to a ES8336 codec. The codec driver must be extended to support the S32 LE format and the MCLK div by 2 option. MCLK div by 2 is needed for one specific SKU which uses a 48Mhz MCLK which seems to be too high of a frequency for the codec and must be divided by 2. The acp legacy driver must also be extended by using callbacks so that the more complicated handling for this specific codec can be moved outside the more generic ACP code. The last patch tries to avoid anoying pop sounds when the speaker/headphones are enabled/disabled by delaying the handling of the GPIOs and using a mutex to avoid race conditions between the speaker power event callback and the trigger callback. Marian Postevca (4): ASoC: es8316: Enable support for S32 LE format and MCLK div by 2 ASoC: amd: acp: Add support for splitting the codec specific code from the ACP driver ASoC: amd: acp: Add machine driver that enables sound for systems with a ES8336 codec ASoC: amd: acp: Improve support for speaker power events sound/soc/amd/acp-config.c | 70 ++ sound/soc/amd/acp/Makefile | 2 +- sound/soc/amd/acp/acp-legacy-mach.c | 105 ++- sound/soc/amd/acp/acp-mach-common.c | 8 + sound/soc/amd/acp/acp-mach.h | 67 ++ sound/soc/amd/acp/acp-renoir.c | 4 + sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c | 615 ++++++++++++++++++ sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.h | 12 + sound/soc/codecs/es8316.c | 21 +- sound/soc/codecs/es8316.h | 3 + 10 files changed, 886 insertions(+), 21 deletions(-) create mode 100644 sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c create mode 100644 sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.h -- 2.39.1

4 25

[PATCH] ASoC: fsl_sai: Enable MCTL_MCLK_EN bit for master mode
by Shengjiu Wang 07 Jul '23

07 Jul '23

On i.MX8MM, the MCTL_MCLK_EN bit it is not only the gate for MCLK output to PAD, but also the gate bit between root clock and SAI module, So it is need to be enabled for master mode, otherwise there is no bclk generated. Signed-off-by: Shengjiu Wang <shengjiu.wang(a)nxp.com> --- sound/soc/fsl/fsl_sai.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index fa950dde5310..dae16a14f177 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -437,6 +437,12 @@ static int fsl_sai_set_bclk(struct snd_soc_dai *dai, bool tx, u32 freq) FSL_SAI_CR2_DIV_MASK | FSL_SAI_CR2_BYP, savediv / 2 - 1); + if (sai->soc_data->max_register >= FSL_SAI_MCTL) { + /* SAI is in master mode at this point, so enable MCLK */ + regmap_update_bits(sai->regmap, FSL_SAI_MCTL, + FSL_SAI_MCTL_MCLK_EN, FSL_SAI_MCTL_MCLK_EN); + } + return 0; } -- 2.17.1

5 11

[PATCH v3 0/6] Introduce STM32 system bus
by Gatien Chevallier 05 Jul '23

05 Jul '23

Document STM32 System Bus. This bus is intended to control firewall access for the peripherals connected to it. For every peripheral, the bus checks the firewall registers to see if the peripheral is configured as non-secure. If the peripheral is configured as secure, the node is marked populated, so the device won't be probed. This is useful as a firewall configuration sanity check and avoid platform crashes in case peripherals are incorrectly configured. The STM32 System Bus implements the feature-domain-controller bindings. It is used by peripherals to reference a domain controller, in this case the firewall feature domain. The bus uses the ID referenced by the feature-domains property to know where to look in the firewall to get the security configuration for the peripheral. This allows a device tree description rather than a hardcoded peripheral table in the bus driver. On STM32MP13/15 platforms, the firewall bus is represented by the ETZPC node, which is responsible for the securing / MCU isolating the capable peripherals. STM32MP13/15 device trees are updated in this series to implement the bus. All peripherals that are securable or MCU isolation capable by the ETZPC are connected to the bus. Changes in V2: - Corrected YAMLS errors highlighted by Rob's robot - Re-ordered Signed-off-by tags in two patches Changes in V3: - Document feature-domains property in YAML documentation for concerned periperals under the System Bus - Fix STM32 System Bus YAML documentation - Remove STM32 System bus bindings that were currently used as helpers for device tree - Correct few errors in driver - Add missing peripherals under the System Bus that were in SoC variation device tree files - Fix node names Gatien Chevallier (5): dt-bindings: treewide: add feature-domains description in binding files dt-bindings: bus: add STM32 System Bus bus: stm32_sys_bus: add support for STM32MP15 and STM32MP13 system bus ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards Oleksii Moisieiev (1): dt-bindings: Document common device controller bindings .../devicetree/bindings/bus/st,sys-bus.yaml | 127 + .../bindings/crypto/st,stm32-hash.yaml | 5 + .../devicetree/bindings/dma/st,stm32-dma.yaml | 5 + .../bindings/dma/st,stm32-dmamux.yaml | 5 + .../feature-domain-controller.yaml | 84 + .../devicetree/bindings/i2c/st,stm32-i2c.yaml | 5 + .../bindings/iio/adc/st,stm32-adc.yaml | 5 + .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 5 + .../bindings/iio/dac/st,stm32-dac.yaml | 5 + .../bindings/media/st,stm32-cec.yaml | 5 + .../bindings/media/st,stm32-dcmi.yaml | 5 + .../memory-controllers/st,stm32-fmc2-ebi.yaml | 5 + .../bindings/mfd/st,stm32-lptimer.yaml | 5 + .../bindings/mfd/st,stm32-timers.yaml | 6 + .../devicetree/bindings/mmc/arm,pl18x.yaml | 5 + .../devicetree/bindings/net/stm32-dwmac.yaml | 5 + .../bindings/phy/phy-stm32-usbphyc.yaml | 5 + .../bindings/regulator/st,stm32-vrefbuf.yaml | 5 + .../devicetree/bindings/rng/st,stm32-rng.yaml | 5 + .../bindings/serial/st,stm32-uart.yaml | 5 + .../bindings/sound/st,stm32-i2s.yaml | 5 + .../bindings/sound/st,stm32-sai.yaml | 5 + .../bindings/sound/st,stm32-spdifrx.yaml | 5 + .../bindings/spi/st,stm32-qspi.yaml | 5 + .../devicetree/bindings/spi/st,stm32-spi.yaml | 5 + .../devicetree/bindings/usb/dwc2.yaml | 5 + MAINTAINERS | 6 + arch/arm/boot/dts/stm32mp131.dtsi | 407 +-- arch/arm/boot/dts/stm32mp133.dtsi | 51 +- arch/arm/boot/dts/stm32mp13xc.dtsi | 19 +- arch/arm/boot/dts/stm32mp13xf.dtsi | 18 +- arch/arm/boot/dts/stm32mp151.dtsi | 2722 +++++++++-------- arch/arm/boot/dts/stm32mp153.dtsi | 52 +- arch/arm/boot/dts/stm32mp15xc.dtsi | 19 +- drivers/bus/Kconfig | 9 + drivers/bus/Makefile | 1 + drivers/bus/stm32_sys_bus.c | 168 + 37 files changed, 2208 insertions(+), 1596 deletions(-) create mode 100644 Documentation/devicetree/bindings/bus/st,sys-bus.yaml create mode 100644 Documentation/devicetree/bindings/feature-controllers/feature-domain-controller.yaml create mode 100644 drivers/bus/stm32_sys_bus.c -- 2.35.3

7 23

[PATCH 0/3] ASoC: SOF: pcm/Intel: Handle IPC dependent sequencing correctly
by Peter Ujfalusi 30 Jun '23

30 Jun '23

Hi, IPC3 and IPC4 firmwares handle and execute tasks at different stages, like managing DMAs. In most cases these are aligned, but we have few exceptions that needs to be handled differently. This series introduces flags to handle the differing cases to make sure that the correct sequencing is used regerless of the IPC version. Regards, Peter --- Ranjani Sridharan (3): ASoC: SOF: Intel: hda-dai: Do not perform DMA cleanup during stop ASoC: SOF: pcm: Make hw_params reset conditional for IPC3 ASoC: SOF: pcm: Improve the pcm trigger sequence sound/soc/sof/intel/hda-dai.c | 1 - sound/soc/sof/ipc3-pcm.c | 1 + sound/soc/sof/ipc4-pcm.c | 3 ++- sound/soc/sof/pcm.c | 29 ++++++++++++++++++++++------- sound/soc/sof/sof-audio.h | 6 ++++++ 5 files changed, 31 insertions(+), 9 deletions(-) -- 2.40.0

4 6

[PATCH] ASoC: qcom: common: add default jack dapm pins
by Srinivas Kandagatla 23 Jun '23

23 Jun '23

If the soundcard does not specify the dapm pins, let the common code add these pins for jack. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> --- sound/soc/qcom/common.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/sound/soc/qcom/common.c b/sound/soc/qcom/common.c index c1f24af17506..555feb845c41 100644 --- a/sound/soc/qcom/common.c +++ b/sound/soc/qcom/common.c @@ -8,6 +8,11 @@ #include "qdsp6/q6afe.h" #include "common.h" +static const struct snd_soc_dapm_widget qcom_jack_snd_widgets[] = { + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_MIC("Mic Jack", NULL), +}; + int qcom_snd_parse_of(struct snd_soc_card *card) { struct device_node *np; @@ -169,6 +174,11 @@ int qcom_snd_parse_of(struct snd_soc_card *card) of_node_put(platform); } + if (!card->dapm_widgets) { + card->dapm_widgets = qcom_jack_snd_widgets; + card->num_dapm_widgets = ARRAY_SIZE(qcom_jack_snd_widgets); + } + return 0; err: of_node_put(cpu); -- 2.21.0

3 2

[PATCH 1/2] ASoC: fsl-asoc-card: add nau8822 support
by Hui Wang 22 Jun '23

22 Jun '23

This is for an imx6sx EVB which has a nau8822 codec connects to the SSI2 interface, so add the nau8822 support in this machine driver. Because the codec driver nau8822.c doesn't handle mclk enabling, here adding a codec_priv->mclk for nau8822 and similar codecs which need to enable the mclk in the machine driver, and enable the mclk in the card_late_probe() conditionally. Signed-off-by: Hui Wang <hui.wang(a)canonical.com> --- sound/soc/fsl/fsl-asoc-card.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c index d9a0d4768c4d..89504865cb1d 100644 --- a/sound/soc/fsl/fsl-asoc-card.c +++ b/sound/soc/fsl/fsl-asoc-card.c @@ -27,6 +27,7 @@ #include "../codecs/wm8960.h" #include "../codecs/wm8994.h" #include "../codecs/tlv320aic31xx.h" +#include "../codecs/nau8822.h" #define CS427x_SYSCLK_MCLK 0 @@ -45,6 +46,7 @@ * @pll_id: PLL id for set_pll() */ struct codec_priv { + struct clk *mclk; unsigned long mclk_freq; unsigned long free_freq; u32 mclk_id; @@ -522,6 +524,9 @@ static int fsl_asoc_card_late_probe(struct snd_soc_card *card) return ret; } + if (!IS_ERR_OR_NULL(codec_priv->mclk)) + clk_prepare_enable(codec_priv->mclk); + return 0; } @@ -682,6 +687,14 @@ static int fsl_asoc_card_probe(struct platform_device *pdev) priv->codec_priv.free_freq = priv->codec_priv.mclk_freq; priv->card.dapm_routes = NULL; priv->card.num_dapm_routes = 0; + } else if (of_device_is_compatible(np, "fsl,imx-audio-nau8822")) { + codec_dai_name = "nau8822-hifi"; + priv->codec_priv.mclk_id = NAU8822_CLK_MCLK; + priv->codec_priv.fll_id = NAU8822_CLK_PLL; + priv->codec_priv.pll_id = NAU8822_CLK_PLL; + priv->dai_fmt |= SND_SOC_DAIFMT_CBM_CFM; + if (codec_dev) + priv->codec_priv.mclk = devm_clk_get(codec_dev, NULL); } else { dev_err(&pdev->dev, "unknown Device Tree compatible\n"); ret = -EINVAL; @@ -907,6 +920,7 @@ static const struct of_device_id fsl_asoc_card_dt_ids[] = { { .compatible = "fsl,imx-audio-wm8524", }, { .compatible = "fsl,imx-audio-si476x", }, { .compatible = "fsl,imx-audio-wm8958", }, + { .compatible = "fsl,imx-audio-nau8822", }, {} }; MODULE_DEVICE_TABLE(of, fsl_asoc_card_dt_ids); -- 2.25.1

2 2

[regression] Bug 216818 - The microphone mute led not working after linux 6
by Thorsten Leemhuis 20 Jun '23

20 Jun '23

Hi, this is your Linux kernel regression tracker speaking. I noticed a regression report in bugzilla.kernel.org. As many (most?) kernel developer don't keep an eye on it, I decided to forward it by mail. Quoting from https://bugzilla.kernel.org/show_bug.cgi?id=216818 : > sonic82003(a)gmail.com 2022-12-18 08:52:32 UTC > > The mic mute led of my ThinkPad X1 Carbon Gen 9 doesn't work anymore after updating linux to version 6. > I can still turn it on by running > > echo 1 > /sys/class/leds/platform::micmute/brightness > > With linux-lts it still works fine. See the ticket for more details. Note, I found a similar report that (despite my attempts to prevent things like this from happening) fell through the cracks here: https://bugzilla.kernel.org/show_bug.cgi?id=216355 > plum 2022-08-13 02:11:01 UTC > > I upgrade to kernel 5.19.1 but found my thinkpad x1 carbon 2021's mute led stop working. > > Function is okay but LED won't light up. > > Back to kernel 5.18 and it's normal and working again. > > Fedora 36 64 bit > Gnome-shell 42 >From a quick research it looks to me like this is an issue for the sounds maintainers, as the LED itself apparently works. If that is something for the platform people instead please speak up. BTW, let me use this mail to also add the report to the list of tracked regressions to ensure it's doesn't fall through the cracks: #regzbot introduced: v5.18..v5.19 https://bugzilla.kernel.org/show_bug.cgi?id=216818 #regzbot ignore-activity Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat) P.S.: As the Linux kernel's regression tracker I deal with a lot of reports and sometimes miss something important when writing mails like this. If that's the case here, don't hesitate to tell me in a public reply, it's in everyone's interest to set the public record straight.

5 5

[PATCH] kselftest/alsa: Increase kselftest timeout
by Nícolas F. R. A. Prado 16 Jun '23

16 Jun '23

The default timeout for kselftests is 45 seconds, but pcm-test can take longer than that to run depending on the number of PCMs present on a device. As a data point, running pcm-test on mt8192-asurada-spherion takes about 1m15s. Set the timeout to 10 minutes, which should give enough slack to run the test even on devices with many PCMs. Signed-off-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> --- tools/testing/selftests/alsa/settings | 1 + 1 file changed, 1 insertion(+) create mode 100644 tools/testing/selftests/alsa/settings diff --git a/tools/testing/selftests/alsa/settings b/tools/testing/selftests/alsa/settings new file mode 100644 index 000000000000..a62d2fa1275c --- /dev/null +++ b/tools/testing/selftests/alsa/settings @@ -0,0 +1 @@ +timeout=600 -- 2.39.0

4 5