February 2023 - Alsa-devel - mailman.alsa-project.org

[PATCH v2] kselftest/alsa: Increase kselftest timeout
by Nícolas F. R. A. Prado 03 Apr '23

03 Apr '23

The default timeout for kselftests is 45 seconds, but that isn't enough time to run pcm-test when there are many PCMs on the device, nor for mixer-test when slower control buses and fancier CODECs are present. As data points, running pcm-test on mt8192-asurada-spherion takes about 1m15s, and mixer-test on rk3399-gru-kevin takes about 2m. Set the timeout to 4 minutes to allow both pcm-test and mixer-test to run to completion with some slack. Reviewed-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> --- Changes in v2: - Reduced timeout from 10 to 4 minutes - Tweaked commit message to also mention mixer-test and run time for mixer-test on rk3399-gru-kevin tools/testing/selftests/alsa/settings | 1 + 1 file changed, 1 insertion(+) create mode 100644 tools/testing/selftests/alsa/settings diff --git a/tools/testing/selftests/alsa/settings b/tools/testing/selftests/alsa/settings new file mode 100644 index 000000000000..b478e684846a --- /dev/null +++ b/tools/testing/selftests/alsa/settings @@ -0,0 +1 @@ +timeout=240 -- 2.39.0

3 3

[PATCH 0/8] ASoC: qcom: q6dsp and lpass codec stablity fixes
by Srinivas Kandagatla 31 Mar '23

31 Mar '23

While testing X13s audio, we found multiple stablity issues this patchset fixes these issues. From q6dsp side issues are around locking of position pointer and handle multiple prepare cases along with pulse audio timerbased scheduling workaround. From LPASS codec side most of the staiblity issues were around runtime pm, hitting various issues as the codec was firstly resetting the soundwire block for every clk disable/enable which is taking the slaves out of sync and resulting in re-enumerating. Second issue was around fsgen clk is not brining up the codec out of suspend as it was not added after runtime pm enabled. Final issue was with codec mclk rate which should have been 192KHz same as npl instead of 96KHz. We were getting lucky as wsa drivers are setting the same clk to 192KHz. With this patches, x13s audio is pretty stable. thanks, Srini Srinivas Kandagatla (8): ASoC: qcom: q6apm-lpass-dai: unprepare stream if its already prepared ASoC: qcom: q6apm-dai: fix race condition while updating the position pointer ASoC: qcom: q6apm-dai: Add SNDRV_PCM_INFO_BATCH flag ASoC: qcom: audioreach: fix ADSP ready check ASoC: codecs: lpass: register mclk after runtime pm ASoC: codecs: lpass: fix incorrect mclk rate ASoC: codecs: lpass: do not reset soundwire block on clk enable ASoC: codecs: lpass: remove not so useful verbose log sound/soc/codecs/lpass-rx-macro.c | 31 ++++++++++-------- sound/soc/codecs/lpass-tx-macro.c | 25 ++++++++------ sound/soc/codecs/lpass-va-macro.c | 43 +++++++++++++------------ sound/soc/codecs/lpass-wsa-macro.c | 27 ++++++++-------- sound/soc/qcom/qdsp6/q6apm-dai.c | 22 +++++++++++-- sound/soc/qcom/qdsp6/q6apm-lpass-dais.c | 5 +++ sound/soc/qcom/qdsp6/q6apm.c | 17 +++++----- 7 files changed, 101 insertions(+), 69 deletions(-) -- 2.21.0

3 12

Re: [PATCH] kernel/drivers: Remove redundant driver match function
by Uwe Kleine-König 19 Mar '23

19 Mar '23

Hello, On Thu, May 05, 2022 at 09:59:52PM -0700, lizhe wrote: > If there is no driver match function, the driver core assumes that each > candidate pair (driver, device) matches, see driver_match_device(). I wonder who is supposed to apply this patch. Either it should be split by file and go in via the respective maintainers, or it goes in via Greg's tree? I added Greg to To: for him to chime in. Best regards Uwe > Signed-off-by: lizhe <sensor1010(a)163.com> > --- > drivers/mfd/mcp-core.c | 6 ------ > drivers/nubus/bus.c | 6 ------ > drivers/s390/crypto/vfio_ap_drv.c | 6 ------ > drivers/scsi/scsi_debug.c | 7 ------- > drivers/target/loopback/tcm_loop.c | 7 ------- > drivers/w1/w1.c | 6 ------ > sound/ac97_bus.c | 11 ----------- > 7 files changed, 49 deletions(-) > > diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c > index 2fa592c37c6f..281a9369f2b3 100644 > --- a/drivers/mfd/mcp-core.c > +++ b/drivers/mfd/mcp-core.c > @@ -20,11 +20,6 @@ > #define to_mcp(d) container_of(d, struct mcp, attached_device) > #define to_mcp_driver(d) container_of(d, struct mcp_driver, drv) > > -static int mcp_bus_match(struct device *dev, struct device_driver *drv) > -{ > - return 1; > -} > - > static int mcp_bus_probe(struct device *dev) > { > struct mcp *mcp = to_mcp(dev); > @@ -43,7 +38,6 @@ static void mcp_bus_remove(struct device *dev) > > static struct bus_type mcp_bus_type = { > .name = "mcp", > - .match = mcp_bus_match, > .probe = mcp_bus_probe, > .remove = mcp_bus_remove, > }; > diff --git a/drivers/nubus/bus.c b/drivers/nubus/bus.c > index 17fad660032c..72921e4f35f6 100644 > --- a/drivers/nubus/bus.c > +++ b/drivers/nubus/bus.c > @@ -14,11 +14,6 @@ > #define to_nubus_board(d) container_of(d, struct nubus_board, dev) > #define to_nubus_driver(d) container_of(d, struct nubus_driver, driver) > > -static int nubus_bus_match(struct device *dev, struct device_driver *driver) > -{ > - return 1; > -} > - > static int nubus_device_probe(struct device *dev) > { > struct nubus_driver *ndrv = to_nubus_driver(dev->driver); > @@ -39,7 +34,6 @@ static void nubus_device_remove(struct device *dev) > > struct bus_type nubus_bus_type = { > .name = "nubus", > - .match = nubus_bus_match, > .probe = nubus_device_probe, > .remove = nubus_device_remove, > }; > diff --git a/drivers/s390/crypto/vfio_ap_drv.c b/drivers/s390/crypto/vfio_ap_drv.c > index 29ebd54f8919..0a662c451f2a 100644 > --- a/drivers/s390/crypto/vfio_ap_drv.c > +++ b/drivers/s390/crypto/vfio_ap_drv.c > @@ -172,14 +172,8 @@ static void vfio_ap_matrix_dev_release(struct device *dev) > kfree(matrix_dev); > } > > -static int matrix_bus_match(struct device *dev, struct device_driver *drv) > -{ > - return 1; > -} > - > static struct bus_type matrix_bus = { > .name = "matrix", > - .match = &matrix_bus_match, > }; > > static struct device_driver matrix_driver = { > diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c > index 592a290e6cfa..8107489b36e8 100644 > --- a/drivers/scsi/scsi_debug.c > +++ b/drivers/scsi/scsi_debug.c > @@ -7844,15 +7844,8 @@ static void sdebug_driver_remove(struct device *dev) > scsi_host_put(sdbg_host->shost); > } > > -static int pseudo_lld_bus_match(struct device *dev, > - struct device_driver *dev_driver) > -{ > - return 1; > -} > - > static struct bus_type pseudo_lld_bus = { > .name = "pseudo", > - .match = pseudo_lld_bus_match, > .probe = sdebug_driver_probe, > .remove = sdebug_driver_remove, > .drv_groups = sdebug_drv_groups, > diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c > index 4407b56aa6d1..eeb63deff94f 100644 > --- a/drivers/target/loopback/tcm_loop.c > +++ b/drivers/target/loopback/tcm_loop.c > @@ -83,15 +83,8 @@ static int tcm_loop_show_info(struct seq_file *m, struct Scsi_Host *host) > static int tcm_loop_driver_probe(struct device *); > static void tcm_loop_driver_remove(struct device *); > > -static int pseudo_lld_bus_match(struct device *dev, > - struct device_driver *dev_driver) > -{ > - return 1; > -} > - > static struct bus_type tcm_loop_lld_bus = { > .name = "tcm_loop_bus", > - .match = pseudo_lld_bus_match, > .probe = tcm_loop_driver_probe, > .remove = tcm_loop_driver_remove, > }; > diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c > index f2ae2e563dc5..a6ecfa1b3417 100644 > --- a/drivers/w1/w1.c > +++ b/drivers/w1/w1.c > @@ -58,11 +58,6 @@ MODULE_PARM_DESC(slave_ttl, > DEFINE_MUTEX(w1_mlock); > LIST_HEAD(w1_masters); > > -static int w1_master_match(struct device *dev, struct device_driver *drv) > -{ > - return 1; > -} > - > static int w1_master_probe(struct device *dev) > { > return -ENODEV; > @@ -174,7 +169,6 @@ static int w1_uevent(struct device *dev, struct kobj_uevent_env *env); > > static struct bus_type w1_bus_type = { > .name = "w1", > - .match = w1_master_match, > .uevent = w1_uevent, > }; > > diff --git a/sound/ac97_bus.c b/sound/ac97_bus.c > index b4685c53ff11..c7aee8c42c55 100644 > --- a/sound/ac97_bus.c > +++ b/sound/ac97_bus.c > @@ -75,19 +75,8 @@ int snd_ac97_reset(struct snd_ac97 *ac97, bool try_warm, unsigned int id, > } > EXPORT_SYMBOL_GPL(snd_ac97_reset); > > -/* > - * Let drivers decide whether they want to support given codec from their > - * probe method. Drivers have direct access to the struct snd_ac97 > - * structure and may decide based on the id field amongst other things. > - */ > -static int ac97_bus_match(struct device *dev, struct device_driver *drv) > -{ > - return 1; > -} > - > struct bus_type ac97_bus_type = { > .name = "ac97", > - .match = ac97_bus_match, > }; > > static int __init ac97_bus_init(void) > -- > 2.25.1 > > -- Pengutronix e.K. | Uwe Kleine-König | Industrial Linux Solutions | https://www.pengutronix.de/ |

3 2

[PATCH v3 0/2] ASoC: dt-bindings: renesas,rsnd.yaml: add R-Car Gen4 support
by Kuninori Morimoto 17 Mar '23

17 Mar '23

Hi Mark These are v3 of R-Car Gen4 support for Renesas sound driver. I have posted these patches as [RFC], because the schemas doesn't work correctly for me under certain conditions. "required: dmas/dma-names" always hits to "if-then" and never hits to "else" for some reasons. I'm still not sure why... But to be very strict, actually, this schemas is not mandatory, because SSI has PIO transfer mode which doesn't need to have DMA settings. This patch-set drops "dmas/dma-names" from SSI for now, and ignore the issue, but it is *not* a wrong schemas. v2 -> v2 - keep clock-name description on top - tidyup git-log v1 -> v2 - tidyup Subject - separate patches (drop "dmas/dma-names", add Gen4 support) - minItems -> maxItems - more git-logs. Link: https://lore.kernel.org/all/87zg9vk0ex.wl-kuninori.morimoto.gx@renesas.com/… Link: https://lore.kernel.org/all/87r0v2uvm7.wl-kuninori.morimoto.gx@renesas.com/… Link: https://lore.kernel.org/all/87r0v1t02h.wl-kuninori.morimoto.gx@renesas.com/… Link: https://lore.kernel.org/all/87y1p7bpma.wl-kuninori.morimoto.gx@renesas.com/… -- 2.25.1

5 17

[regression] Bug 217063 - Commit 2232b2d breaks microphone on Lenovo "82SJ" Ideapad 14ARH7
by Linux regression tracking (Thorsten Leemhuis) 16 Mar '23

16 Mar '23

Hi, this is your Linux kernel regression tracker. I noticed a regression report in bugzilla.kernel.org. As many (most?) kernel developer don't keep an eye on it, I decided to forward it by mail. Quoting from https://bugzilla.kernel.org/show_bug.cgi?id=217063 : > [reply] [−] Description Joseph R 2023-02-21 00:35:34 UTC > > Created attachment 303765 [details] lspci -vv > > Commit 2232b2dd8cd4f1e6d554b2c3f6899ce36f791b67, intended to fix > sound on Lenovo Yoga Slim 7 Pro X, makes the microphone on Lenovo > Ideapad 14 14ARH7 with product code Lenovo "82SJ" unusable. > > Simply removing the lines added by the commit make the microphone > work again without issues. > > Attached is lspci on a kernel with the lines removed. > > First kernel bug report, so please let me know how I can help get > this fixed! See the ticket for more details. [TLDR for the rest of this mail: I'm adding this report to the list of tracked Linux kernel regressions; the text you find below is based on a few templates paragraphs you might have encountered already in similar form.] BTW, let me use this mail to also add the report to the list of tracked regressions to ensure it's doesn't fall through the cracks: #regzbot introduced: 2232b2dd8cd4f1e6d5 https://bugzilla.kernel.org/show_bug.cgi?id=217063 #regzbot title: alsa/asoc: microphone on Lenovo "82SJ" Ideapad 14ARH7 broken #regzbot ignore-activity This isn't a regression? This issue or a fix for it are already discussed somewhere else? It was fixed already? You want to clarify when the regression started to happen? Or point out I got the title or something else totally wrong? Then just reply and tell me -- ideally while also telling regzbot about it, as explained by the page listed in the footer of this mail. Developers: When fixing the issue, remember to add 'Link:' tags pointing to the report (e.g. the buzgzilla ticket and maybe this mail as well, if this thread sees some discussion). See page linked in footer for details. Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat) -- Everything you wanna know about Linux kernel regression tracking: https://linux-regtracking.leemhuis.info/about/#tldr If I did something stupid, please tell me, as explained on that page.

2 1

[PATCH v2 1/7] arm64: dts: qcom: ipq6018: align RPM G-Link node with bindings
by Krzysztof Kozlowski 16 Mar '23

16 Mar '23

Bindings expect (and most of DTS use) the RPM G-Link node name to be "rpm-requests". Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov(a)linaro.org> --- Changes since v1: 1. Add Rb tag. --- arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index d32c9b2515ee..bbd94025ff5d 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -176,7 +176,7 @@ rpm-glink { qcom,rpm-msg-ram = <&rpm_msg_ram>; mboxes = <&apcs_glb 0>; - rpm_requests: glink-channel { + rpm_requests: rpm-requests { compatible = "qcom,rpm-ipq6018"; qcom,glink-channels = "rpm_requests"; -- 2.34.1

5 19

[PATCH 1/2] soundwire: qcom: define hardcoded version magic numbers
by Krzysztof Kozlowski 15 Mar '23

15 Mar '23

Use a define instead of hard-coded register values for Soundwire hardware version number, because it is a bit easier to read and allows to drop explaining comment. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- drivers/soundwire/qcom.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index ba502129150d..79bebcecde6d 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -28,6 +28,9 @@ #define SWRM_LINK_MANAGER_EE 0x018 #define SWRM_EE_CPU 1 #define SWRM_FRM_GEN_ENABLED BIT(0) +#define SWRM_VERSION_1_3_0 0x01030000 +#define SWRM_VERSION_1_5_1 0x01050001 +#define SWRM_VERSION_1_7_0 0x01070000 #define SWRM_COMP_HW_VERSION 0x00 #define SWRM_COMP_CFG_ADDR 0x04 #define SWRM_COMP_CFG_IRQ_LEVEL_OR_PULSE_MSK BIT(1) @@ -351,8 +354,7 @@ static int qcom_swrm_cmd_fifo_wr_cmd(struct qcom_swrm_ctrl *swrm, u8 cmd_data, /* Its assumed that write is okay as we do not get any status back */ swrm->reg_write(swrm, SWRM_CMD_FIFO_WR_CMD, val); - /* version 1.3 or less */ - if (swrm->version <= 0x01030000) + if (swrm->version <= SWRM_VERSION_1_3_0) usleep_range(150, 155); if (cmd_id == SWR_BROADCAST_CMD_ID) { @@ -695,7 +697,7 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl) u32p_replace_bits(&val, SWRM_DEF_CMD_NO_PINGS, SWRM_MCP_CFG_MAX_NUM_OF_CMD_NO_PINGS_BMSK); ctrl->reg_write(ctrl, SWRM_MCP_CFG_ADDR, val); - if (ctrl->version >= 0x01070000) { + if (ctrl->version >= SWRM_VERSION_1_7_0) { ctrl->reg_write(ctrl, SWRM_LINK_MANAGER_EE, SWRM_EE_CPU); ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START << SWRM_EE_CPU); @@ -704,8 +706,7 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl) } /* Configure number of retries of a read/write cmd */ - if (ctrl->version >= 0x01050001) { - /* Only for versions >= 1.5.1 */ + if (ctrl->version >= SWRM_VERSION_1_5_1) { ctrl->reg_write(ctrl, SWRM_CMD_FIFO_CFG_ADDR, SWRM_RD_WR_CMD_RETRIES | SWRM_CONTINUE_EXEC_ON_CMD_IGNORE); @@ -1239,7 +1240,7 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl) ret = of_property_read_u8_array(np, "qcom,ports-block-pack-mode", bp_mode, nports); if (ret) { - if (ctrl->version <= 0x01030000) + if (ctrl->version <= SWRM_VERSION_1_3_0) memset(bp_mode, SWR_INVALID_PARAM, QCOM_SDW_MAX_PORTS); else return ret; @@ -1442,7 +1443,7 @@ static int qcom_swrm_probe(struct platform_device *pdev) pm_runtime_enable(dev); /* Clk stop is not supported on WSA Soundwire masters */ - if (ctrl->version <= 0x01030000) { + if (ctrl->version <= SWRM_VERSION_1_3_0) { ctrl->clock_stop_not_supported = true; } else { ctrl->reg_read(ctrl, SWRM_COMP_MASTER_ID, &val); @@ -1527,7 +1528,7 @@ static int __maybe_unused swrm_runtime_resume(struct device *dev) } else { reset_control_reset(ctrl->audio_cgcr); - if (ctrl->version >= 0x01070000) { + if (ctrl->version >= SWRM_VERSION_1_7_0) { ctrl->reg_write(ctrl, SWRM_LINK_MANAGER_EE, SWRM_EE_CPU); ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START << SWRM_EE_CPU); -- 2.34.1

4 8

[PATCH 0/2] soundwire: bus: Prevent infinite loop in sdw_ch_mask_to_ch()
by Richard Fitzgerald 15 Mar '23

15 Mar '23

sdw_ch_mask_to_ch() would loop forever if bit 31 of the mask was set. The entire function is unnecessary because the existing standard function hweight32() already does the same thing, and hweight32() is safe. But the change has been made in two steps. Richard Fitzgerald (2): soundwire: bus: Prevent infinite loop in sdw_ch_mask_to_ch() soundwire: bandwidth allocation: Use hweight32() to calculate set bits drivers/soundwire/bus.h | 11 ----------- drivers/soundwire/generic_bandwidth_allocation.c | 3 ++- 2 files changed, 2 insertions(+), 12 deletions(-) -- 2.30.2

3 5

[PATCH] soundwire: qcom: correct setting ignore bit on v1.5.1
by Krzysztof Kozlowski 15 Mar '23

15 Mar '23

According to the comment and to downstream sources, the SWRM_CONTINUE_EXEC_ON_CMD_IGNORE in SWRM_CMD_FIFO_CFG_ADDR register should be set for v1.5.1 and newer, so fix the >= operator. Fixes: 542d3491cdd7 ("soundwire: qcom: set continue execution flag for ignored commands") Cc: <stable(a)vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- drivers/soundwire/qcom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index d5b73b7f98bf..29035cf15407 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -733,7 +733,7 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl) } /* Configure number of retries of a read/write cmd */ - if (ctrl->version > 0x01050001) { + if (ctrl->version >= 0x01050001) { /* Only for versions >= 1.5.1 */ ctrl->reg_write(ctrl, SWRM_CMD_FIFO_CFG_ADDR, SWRM_RD_WR_CMD_RETRIES | -- 2.34.1

3 2

[PATCH 1/3] ASoC: dt-bindings: wlf,wm8960: Convert to dtschema
by Krzysztof Kozlowski 14 Mar '23

14 Mar '23

Convert the Wolfson WM8960 audio codecs bindings to DT schema. Changes against original binding: 1. Document clocks and clock-names - already present in DTS and used by Linux driver. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- One DTS warning still remains: uniphier-pxs2-gentil.dtb: wm8960@1a: Unevaluated properties are not allowed ('port@0' was unexpected) I am not sure if this is correct usage of endpoints. I would assume the codec should be used only as DAI. --- .../devicetree/bindings/sound/wlf,wm8960.yaml | 88 +++++++++++++++++++ .../devicetree/bindings/sound/wm8960.txt | 42 --------- 2 files changed, 88 insertions(+), 42 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8960.yaml delete mode 100644 Documentation/devicetree/bindings/sound/wm8960.txt diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8960.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8960.yaml new file mode 100644 index 000000000000..ee8eba7f0104 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wlf,wm8960.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/wlf,wm8960.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Wolfson WM8960 audio codec + +maintainers: + - patches(a)opensource.cirrus.com + +properties: + compatible: + const: wlf,wm8960 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: mclk + + '#sound-dai-cells': + const: 0 + + wlf,capless: + type: boolean + description: + If present, OUT3 pin will be enabled and disabled together with HP_L and + HP_R pins in response to jack detect events. + + wlf,gpio-cfg: + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 2 + description: | + A list of GPIO configuration register values. + - gpio-cfg[0]: ALRCGPIO of R9 (Audio interface) + - gpio-cfg[1]: {GPIOPOL:GPIOSEL[2:0]} of R48 (Additional Control 4). + + wlf,hp-cfg: + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 3 + description: | + A list of headphone jack detect configuration register values: + - hp-cfg[0]: HPSEL[1:0] of R48 (Additional Control 4). + - hp-cfg[1]: {HPSWEN:HPSWPOL} of R24 (Additional Control 2). + - hp-cfg[2]: {TOCLKSEL:TOEN} of R23 (Additional Control 1). + + wlf,shared-lrclk: + type: boolean + description: + If present, the LRCM bit of R24 (Additional control 2) gets set, + indicating that ADCLRC and DACLRC pins will be disabled only when ADC + (Left and Right) and DAC (Left and Right) are disabled. + When WM8960 works on synchronize mode and DACLRC pin is used to supply + frame clock, it will no frame clock for captrue unless enable DAC to + enable DACLRC pin. If shared-lrclk is present, no need to enable DAC for + captrue. + +required: + - compatible + - reg + +allOf: + - $ref: dai-common.yaml# + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + audio-codec@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + clocks = <&clks 0>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + wlf,hp-cfg = <3 2 3>; + wlf,gpio-cfg = <1 3>; + wlf,shared-lrclk; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/wm8960.txt b/Documentation/devicetree/bindings/sound/wm8960.txt deleted file mode 100644 index 85d3b287108c..000000000000 --- a/Documentation/devicetree/bindings/sound/wm8960.txt +++ /dev/null @@ -1,42 +0,0 @@ -WM8960 audio CODEC - -This device supports I2C only. - -Required properties: - - - compatible : "wlf,wm8960" - - - reg : the I2C address of the device. - -Optional properties: - - wlf,shared-lrclk: This is a boolean property. If present, the LRCM bit of - R24 (Additional control 2) gets set, indicating that ADCLRC and DACLRC pins - will be disabled only when ADC (Left and Right) and DAC (Left and Right) - are disabled. - When wm8960 works on synchronize mode and DACLRC pin is used to supply - frame clock, it will no frame clock for captrue unless enable DAC to enable - DACLRC pin. If shared-lrclk is present, no need to enable DAC for captrue. - - - wlf,capless: This is a boolean property. If present, OUT3 pin will be - enabled and disabled together with HP_L and HP_R pins in response to jack - detect events. - - - wlf,hp-cfg: A list of headphone jack detect configuration register values. - The list must be 3 entries long. - hp-cfg[0]: HPSEL[1:0] of R48 (Additional Control 4). - hp-cfg[1]: {HPSWEN:HPSWPOL} of R24 (Additional Control 2). - hp-cfg[2]: {TOCLKSEL:TOEN} of R23 (Additional Control 1). - - - wlf,gpio-cfg: A list of GPIO configuration register values. - The list must be 2 entries long. - gpio-cfg[0]: ALRCGPIO of R9 (Audio interface) - gpio-cfg[1]: {GPIOPOL:GPIOSEL[2:0]} of R48 (Additional Control 4). - -Example: - -wm8960: codec@1a { - compatible = "wlf,wm8960"; - reg = <0x1a>; - - wlf,shared-lrclk; -}; -- 2.34.1

5 7