November 2023 - Alsa-devel - mailman.alsa-project.org

Codec stops working after sleep and resume
by Jesús Jiménez Sánchez 15 Feb '24

15 Feb '24

I am using the tlv320aic31xx codec in my embedded device and I've noticed that, after forcing the unit into sleep and then, resume, I get a bunch of these errors: ``` tlv320aic31xx-codec 0-0018: ASoC: error at snd_soc_component_update_bits on tlv320aic31xx-codec.0-0018: -108 tlv320aic31xx-codec 0-0018: aic31xx_wait_bits: Failed! 0x25 was 0xcc239ca8 expected 0x0 (-108, 0x20, 0 us) tlv320aic31xx-codec 0-0018: ASoC: POST_PMD: HPL Driver event failed: -1 tlv320aic31xx-codec 0-0018: ASoC: error at snd_soc_component_update_bits on tlv320aic31xx-codec.0-0018: -108 tlv320aic31xx-codec 0-0018: ASoC: POST_PMD: SPL ClassD event failed: -108 tlv320aic31xx-codec 0-0018: ASoC: POST_PMD: SPR ClassD event failed: -108 tlv320aic31xx-codec 0-0018: ASoC: error at snd_soc_component_update_bits on tlv320aic31xx-codec.0-0018: -108 tlv320aic31xx-codec 0-0018: ASoC: error at snd_soc_component_update_bits on tlv320aic31xx-codec.0-0018: -108 tlv320aic31xx-codec 0-0018: ASoC: error at snd_soc_component_update_bits on tlv320aic31xx-codec.0-0018: -108 tlv320aic31xx-codec 0-0018: ASoC: error at snd_soc_component_update_bits on tlv320aic31xx-codec.0-0018: -108 tlv320aic31xx-codec 0-0018: ASoC: error at snd_soc_component_update_bits on tlv320aic31xx-codec.0-0018: -108 tlv320aic31xx-codec 0-0018: ASoC: error at snd_soc_component_update_bits on tlv320aic31xx-codec.0-0018: -108 tlv320aic31xx-codec 0-0018: ASoC: error at snd_soc_component_update_bits on tlv320aic31xx-codec.0-0018: -108 ``` When I look at he output of `dmesg`, I found this: ``` ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1506 at drivers/i2c/i2c-core.h:54 __i2c_transfer+0xac/0xb4 i2c i2c-0: Transfer while suspended Modules linked in: rfcomm stm32_adc stm32_timer_trigger stm32_lptimer_trigger sha256_generic libsha256 sha256_arm snd_soc_simple_card snd_soc_simple_card_utils cfg80211 stm32_crc32 hci_uart btqca stm32_cryp libdes crypto_engine snd_soc_stm32_i2s snd_soc_tlv320aic31xx bluetooth stm32_adc_core snd_soc_core atmel_mxt_ts snd_pcm_dmaengine snd_pcm ecdh_generic snd_timer snd ecc sgm4151x_charger soundcore libaes [last unloaded: wlan] CPU: 0 PID: 1506 Comm: sh Tainted: G O 5.15.67 #1 Hardware name: STM32 (Device Tree Support) [<c010e8cc>] (unwind_backtrace) from [<c010c120>] (show_stack+0x10/0x14) [<c010c120>] (show_stack) from [<c011dc1c>] (__warn+0xec/0x148) [<c011dc1c>] (__warn) from [<c0bed42c>] (warn_slowpath_fmt+0x78/0xac) [<c0bed42c>] (warn_slowpath_fmt) from [<c092ecdc>] (__i2c_transfer+0xac/0xb4) [<c092ecdc>] (__i2c_transfer) from [<c092ed80>] (i2c_transfer+0x9c/0x138) [<c092ed80>] (i2c_transfer) from [<c06f5a40>] (regmap_i2c_read+0x5c/0x98) [<c06f5a40>] (regmap_i2c_read) from [<c06f0e2c>] (_regmap_raw_read+0x10c/0x2a8) [<c06f0e2c>] (_regmap_raw_read) from [<c06f1008>] (_regmap_bus_read+0x40/0x6c) [<c06f1008>] (_regmap_bus_read) from [<c06ef9c4>] (_regmap_read+0x60/0x14c) [<c06ef9c4>] (_regmap_read) from [<c06effdc>] (_regmap_update_bits+0xb4/0xf4) [<c06effdc>] (_regmap_update_bits) from [<c06f00c0>] (_regmap_select_page+0xa4/0x108) [<c06f00c0>] (_regmap_select_page) from [<c06f07a8>] (_regmap_raw_write_impl+0x684/0x968) [<c06f07a8>] (_regmap_raw_write_impl) from [<c06f0b04>] (_regmap_bus_raw_write+0x78/0xa0) [<c06f0b04>] (_regmap_bus_raw_write) from [<c06efe40>] (_regmap_write+0x4c/0x134) [<c06efe40>] (_regmap_write) from [<c06f0010>] (_regmap_update_bits+0xe8/0xf4) [<c06f0010>] (_regmap_update_bits) from [<c06f1820>] (regmap_update_bits_base+0x50/0x74) [<c06f1820>] (regmap_update_bits_base) from [<bf0d0980>] (snd_soc_component_update_bits+0x78/0x124 [snd_soc_core]) [<bf0d0980>] (snd_soc_component_update_bits [snd_soc_core]) from [<bf0daa20>] (dapm_seq_run_coalesced+0x14c/0x1a4 [snd_soc_core]) [<bf0daa20>] (dapm_seq_run_coalesced [snd_soc_core]) from [<bf0dab68>] (dapm_seq_run+0xf0/0x350 [snd_soc_core]) [<bf0dab68>] (dapm_seq_run [snd_soc_core]) from [<bf0db170>] (dapm_power_widgets+0x3a8/0x530 [snd_soc_core]) [<bf0db170>] (dapm_power_widgets [snd_soc_core]) from [<bf0cc214>] (snd_soc_dapm_sync+0x48/0x54 [snd_soc_core]) [<bf0cc214>] (snd_soc_dapm_sync [snd_soc_core]) from [<bf0c652c>] (snd_soc_suspend+0xf0/0x230 [snd_soc_core]) [<bf0c652c>] (snd_soc_suspend [snd_soc_core]) from [<c06df188>] (dpm_run_callback+0x48/0x134) [<c06df188>] (dpm_run_callback) from [<c06df58c>] (__device_suspend+0x11c/0x4c4) [<c06df58c>] (__device_suspend) from [<c06e1c10>] (dpm_suspend+0x148/0x2cc) [<c06e1c10>] (dpm_suspend) from [<c06e20e8>] (dpm_suspend_start+0x64/0x6c) [<c06e20e8>] (dpm_suspend_start) from [<c0159f00>] (suspend_devices_and_enter+0x150/0x2b4) [<c0159f00>] (suspend_devices_and_enter) from [<c0bede38>] (enter_state+0x204/0x250) [<c0bede38>] (enter_state) from [<c015a0a4>] (pm_suspend+0x40/0x98) [<c015a0a4>] (pm_suspend) from [<c0158ae4>] (state_store+0x68/0xc8) [<c0158ae4>] (state_store) from [<c0330a68>] (kernfs_fop_write_iter+0x10c/0x1cc) [<c0330a68>] (kernfs_fop_write_iter) from [<c028ea40>] (vfs_write+0x298/0x45c) [<c028ea40>] (vfs_write) from [<c028ed4c>] (ksys_write+0x60/0xe4) [<c028ed4c>] (ksys_write) from [<c0100060>] (ret_fast_syscall+0x0/0x48) Exception stack(0xcffcbfa8 to 0xcffcbff0) bfa0: 00000004 005ac7d8 00000001 005ac7d8 00000004 00000000 bfc0: 00000004 005ac7d8 00000001 00000004 b6f01680 bee896d8 005a8448 005a8590 bfe0: 005a6dfc bee89690 004fcda4 b6dcb4f8 ---[ end trace 75457fd792755cae ]--- ``` I've been trying for a few days, but I can't find the source of the problem or a way to solve it. Is there anything I might be missing? I assume the problem is that it's trying to write to the registers after the suspend has happened, but I haven't been able to prove that either, and I wouldn't know how to fix that. Could that be what's happening here? Thanks.

1 1

[PATCH v7 0/6] Add cs42l43 PC focused SoundWire CODEC
by Charles Keepax 31 Jan '24

31 Jan '24

This patch chain adds support for the Cirrus Logic cs42l43 PC focused SoundWire CODEC. The chain is currently based of Lee's for-mfd-next branch. This series is mostly just a resend keeping pace with the kernel under it, except for a minor fixup in the ASoC stuff. Thanks, Charles Charles Keepax (4): dt-bindings: mfd: cirrus,cs42l43: Add initial DT binding mfd: cs42l43: Add support for cs42l43 core driver pinctrl: cs42l43: Add support for the cs42l43 ASoC: cs42l43: Add support for the cs42l43 Lucas Tanure (2): soundwire: bus: Allow SoundWire peripherals to register IRQ handlers spi: cs42l43: Add SPI controller support .../bindings/sound/cirrus,cs42l43.yaml | 313 +++ MAINTAINERS | 4 + drivers/mfd/Kconfig | 23 + drivers/mfd/Makefile | 3 + drivers/mfd/cs42l43-i2c.c | 98 + drivers/mfd/cs42l43-sdw.c | 239 ++ drivers/mfd/cs42l43.c | 1188 +++++++++ drivers/mfd/cs42l43.h | 28 + drivers/pinctrl/cirrus/Kconfig | 11 + drivers/pinctrl/cirrus/Makefile | 2 + drivers/pinctrl/cirrus/pinctrl-cs42l43.c | 609 +++++ drivers/soundwire/bus.c | 32 + drivers/soundwire/bus_type.c | 12 + drivers/spi/Kconfig | 7 + drivers/spi/Makefile | 1 + drivers/spi/spi-cs42l43.c | 284 ++ include/linux/mfd/cs42l43-regs.h | 1184 +++++++++ include/linux/mfd/cs42l43.h | 102 + include/linux/soundwire/sdw.h | 9 + include/sound/cs42l43.h | 17 + sound/soc/codecs/Kconfig | 16 + sound/soc/codecs/Makefile | 4 + sound/soc/codecs/cs42l43-jack.c | 946 +++++++ sound/soc/codecs/cs42l43-sdw.c | 74 + sound/soc/codecs/cs42l43.c | 2278 +++++++++++++++++ sound/soc/codecs/cs42l43.h | 131 + 26 files changed, 7615 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml create mode 100644 drivers/mfd/cs42l43-i2c.c create mode 100644 drivers/mfd/cs42l43-sdw.c create mode 100644 drivers/mfd/cs42l43.c create mode 100644 drivers/mfd/cs42l43.h create mode 100644 drivers/pinctrl/cirrus/pinctrl-cs42l43.c create mode 100644 drivers/spi/spi-cs42l43.c create mode 100644 include/linux/mfd/cs42l43-regs.h create mode 100644 include/linux/mfd/cs42l43.h create mode 100644 include/sound/cs42l43.h create mode 100644 sound/soc/codecs/cs42l43-jack.c create mode 100644 sound/soc/codecs/cs42l43-sdw.c create mode 100644 sound/soc/codecs/cs42l43.c create mode 100644 sound/soc/codecs/cs42l43.h -- 2.30.2

6 32

[v3 0/3] ASoC: mediatek:mt8186: fix both the speaker and hdmi
by Jiaxin Yu 31 Jan '24

31 Jan '24

The speaker and hdmi of mt8186 platform are shared the same port of I2S, when connect the external display, use build-in speakers to play audio, they both playback at the same time. So we want to manage the playback device through DAPM events. Jiaxin Yu (3): ASoC: hdmi-codec: Add event handler for hdmi TX ASoC: mediatek: mt8186: correct the HDMI widgets drm/bridge: it6505: Add audio support drivers/gpu/drm/bridge/ite-it6505.c | 81 +++++++++++++++++-- include/sound/hdmi-codec.h | 6 ++ sound/soc/codecs/hdmi-codec.c | 32 +++++++- .../mt8186/mt8186-mt6366-da7219-max98357.c | 2 +- .../mt8186/mt8186-mt6366-rt1019-rt5682s.c | 2 +- 5 files changed, 113 insertions(+), 10 deletions(-) -- 2.25.1

5 13

[PATCH] Add a quirk for Yamaha YIT-W12TX transmitter
by Julian Sikorski 23 Jan '24

23 Jan '24

The device fails to initialize otherwise, giving the following error: [ 3676.671641] usb 2-1.1: 1:1: cannot get freq at ep 0x1 Signed-off-by: Julian Sikorski <belegdol+github(a)gmail.com> --- sound/usb/quirks.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index ab2b938502eb..bf0a7cca90d0 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -2031,6 +2031,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = { QUIRK_FLAG_CTL_MSG_DELAY_1M | QUIRK_FLAG_IGNORE_CTL_ERROR), DEVICE_FLG(0x0499, 0x1509, /* Steinberg UR22 */ QUIRK_FLAG_GENERIC_IMPLICIT_FB), + DEVICE_FLG(0x0499, 0x3108, /* Yamaha YIT-W12TX */ + QUIRK_FLAG_GET_SAMPLE_RATE), DEVICE_FLG(0x04d8, 0xfeea, /* Benchmark DAC1 Pre */ QUIRK_FLAG_GET_SAMPLE_RATE), DEVICE_FLG(0x04e8, 0xa051, /* Samsung USBC Headset (AKG) */ -- 2.43.0

2 2

[PATCH v11 00/15] Add audio support in v4l2 framework
by Shengjiu Wang 18 Jan '24

18 Jan '24

Audio signal processing also has the requirement for memory to memory similar as Video. This asrc memory to memory (memory ->asrc->memory) case is a non real time use case. User fills the input buffer to the asrc module, after conversion, then asrc sends back the output buffer to user. So it is not a traditional ALSA playback and capture case. It is a specific use case, there is no reference in current kernel. v4l2 memory to memory is the closed implementation, v4l2 current support video, image, radio, tuner, touch devices, so it is not complicated to add support for this specific audio case. Because we had implemented the "memory -> asrc ->i2s device-> codec" use case in ALSA. Now the "memory->asrc->memory" needs to reuse the code in asrc driver, so the first 3 patches is for refining the code to make it can be shared by the "memory->asrc->memory" driver. The main change is in the v4l2 side, A /dev/vl4-audioX will be created, user applications only use the ioctl of v4l2 framework. Other change is to add memory to memory support for two kinds of i.MX ASRC module. changes in v11 - add add-fixed-point-test-controls in vivid. - add v4l2_ctrl_fp_compose() helper function for min and max changes in v10 - remove FIXED_POINT type - change code base on media: v4l2-ctrls: add support for fraction_bits - fix issue reported by kernel test robot - remove module_alias changes in v9: - add MEDIA_ENT_F_PROC_AUDIO_RESAMPLER. - add MEDIA_INTF_T_V4L_AUDIO - add media controller support - refine the vim2m-audio to support 8k<->16k conversion. changes in v8: - refine V4L2_CAP_AUDIO_M2M to be 0x00000008 - update doc for FIXED_POINT - address comments for imx-asrc changes in v7: - add acked-by from Mark - separate commit for fixed point, m2m audio class, audio rate controls - use INTEGER_MENU for rate, FIXED_POINT for rate offset - remove used fmts - address other comments for Hans changes in v6: - use m2m_prepare/m2m_unprepare/m2m_start/m2m_stop to replace m2m_start_part_one/m2m_stop_part_one, m2m_start_part_two/m2m_stop_part_two. - change V4L2_CTRL_TYPE_ASRC_RATE to V4L2_CTRL_TYPE_FIXED_POINT - fix warning by kernel test rebot - remove some unused format V4L2_AUDIO_FMT_XX - Get SNDRV_PCM_FORMAT from V4L2_AUDIO_FMT in driver. - rename audm2m to viaudm2m. changes in v5: - remove V4L2_AUDIO_FMT_LPCM - define audio pixel format like V4L2_AUDIO_FMT_S8... - remove rate and format in struct v4l2_audio_format. - Add V4L2_CID_ASRC_SOURCE_RATE and V4L2_CID_ASRC_DEST_RATE controls - updata document accordingly. changes in v4: - update document style - separate V4L2_AUDIO_FMT_LPCM and V4L2_CAP_AUDIO_M2M in separate commit changes in v3: - Modify documents for adding audio m2m support - Add audio virtual m2m driver - Defined V4L2_AUDIO_FMT_LPCM format type for audio. - Defined V4L2_CAP_AUDIO_M2M capability type for audio m2m case. - with modification in v4l-utils, pass v4l2-compliance test. changes in v2: - decouple the implementation in v4l2 and ALSA - implement the memory to memory driver as a platfrom driver and move it to driver/media - move fsl_asrc_common.h to include/sound folder Shengjiu Wang (15): ASoC: fsl_asrc: define functions for memory to memory usage ASoC: fsl_easrc: define functions for memory to memory usage ASoC: fsl_asrc: move fsl_asrc_common.h to include/sound ASoC: fsl_asrc: register m2m platform device ASoC: fsl_easrc: register m2m platform device media: uapi: Add V4L2_CAP_AUDIO_M2M capability flag media: v4l2: Add audio capture and output support media: uapi: Define audio sample format fourcc type media: uapi: Add V4L2_CTRL_CLASS_M2M_AUDIO media: uapi: Add audio rate controls support media: uapi: Declare interface types for Audio media: uapi: Add an entity type for audio resampler media: vivid: add fixed point test controls media: imx-asrc: Add memory to memory driver media: vim2m-audio: add virtual driver for audio memory to memory .../media/mediactl/media-types.rst | 11 + .../userspace-api/media/v4l/buffer.rst | 6 + .../userspace-api/media/v4l/common.rst | 1 + .../media/v4l/dev-audio-mem2mem.rst | 71 + .../userspace-api/media/v4l/devices.rst | 1 + .../media/v4l/ext-ctrls-audio-m2m.rst | 41 + .../userspace-api/media/v4l/pixfmt-audio.rst | 87 ++ .../userspace-api/media/v4l/pixfmt.rst | 1 + .../media/v4l/vidioc-enum-fmt.rst | 2 + .../media/v4l/vidioc-g-ext-ctrls.rst | 4 + .../userspace-api/media/v4l/vidioc-g-fmt.rst | 4 + .../media/v4l/vidioc-querycap.rst | 3 + .../media/videodev2.h.rst.exceptions | 3 + .../media/common/videobuf2/videobuf2-v4l2.c | 4 + drivers/media/platform/nxp/Kconfig | 13 + drivers/media/platform/nxp/Makefile | 1 + drivers/media/platform/nxp/imx-asrc.c | 1264 +++++++++++++++++ drivers/media/test-drivers/Kconfig | 11 + drivers/media/test-drivers/Makefile | 1 + drivers/media/test-drivers/vim2m-audio.c | 799 +++++++++++ drivers/media/test-drivers/vivid/vivid-core.h | 2 + .../media/test-drivers/vivid/vivid-ctrls.c | 26 + drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 9 + drivers/media/v4l2-core/v4l2-ctrls-defs.c | 10 + drivers/media/v4l2-core/v4l2-dev.c | 21 + drivers/media/v4l2-core/v4l2-ioctl.c | 66 + drivers/media/v4l2-core/v4l2-mem2mem.c | 13 +- include/media/v4l2-ctrls.h | 3 + include/media/v4l2-dev.h | 2 + include/media/v4l2-ioctl.h | 34 + .../fsl => include/sound}/fsl_asrc_common.h | 60 + include/uapi/linux/media.h | 2 + include/uapi/linux/v4l2-controls.h | 9 + include/uapi/linux/videodev2.h | 41 + sound/soc/fsl/fsl_asrc.c | 144 ++ sound/soc/fsl/fsl_asrc.h | 4 +- sound/soc/fsl/fsl_asrc_dma.c | 2 +- sound/soc/fsl/fsl_easrc.c | 233 +++ sound/soc/fsl/fsl_easrc.h | 6 +- 39 files changed, 3008 insertions(+), 7 deletions(-) create mode 100644 Documentation/userspace-api/media/v4l/dev-audio-mem2mem.rst create mode 100644 Documentation/userspace-api/media/v4l/ext-ctrls-audio-m2m.rst create mode 100644 Documentation/userspace-api/media/v4l/pixfmt-audio.rst create mode 100644 drivers/media/platform/nxp/imx-asrc.c create mode 100644 drivers/media/test-drivers/vim2m-audio.c rename {sound/soc/fsl => include/sound}/fsl_asrc_common.h (60%) -- 2.34.1

3 25

[RESEND PATCH 0/1] ALSA: virtio: add support for audio controls
by Aiswarya Cyriac 15 Jan '24

15 Jan '24

From: Anton Yakovlev <anton.yakovlev(a)opensynergy.com> Implementation of support for audio controls in accordance with the extension of the virtio sound device specification[1] planned for virtio-v1.3-cs01. Design　of virtual audio controls is based on and derived from ALSA audio controls. It allows the driver to perform all standard operations, such as reading and writing audio control value, as well as working with metadata (represented in the TLV form). The driver part was tested on top of the Linux 5.10 kernel. As a device part was used OpenSynergy proprietary implementation. [1] https://lists.oasis-open.org/archives/virtio-comment/202104/msg00013.html Anton Yakovlev (1): ALSA: virtio: add support for audio controls include/uapi/linux/virtio_snd.h | 154 +++++++++++ sound/virtio/Makefile | 1 + sound/virtio/virtio_card.c | 21 ++ sound/virtio/virtio_card.h | 22 ++ sound/virtio/virtio_kctl.c | 464 ++++++++++++++++++++++++++++++++ 5 files changed, 662 insertions(+) create mode 100644 sound/virtio/virtio_kctl.c -- 2.25.1

2 3

[PATCH 0/7] ASoC: rt5645: Add Acer Switch V 10 quirk + report quirks in components string
by Hans de Goede 22 Dec '23

22 Dec '23

Hi all, This patch-series adds a quirk for the Acer Switch V 10, which uses a DMIC on the DMIC2 input, rather then the default analog mic on IN2. Most of the patches are actually for adding a component string with mic and speaker routing information so that the UCM profile can use this instead of duplicating all the DMI quirks in the UCM profile. I've also submitted a alsa-ucm-config patch to add support for the components string. Regards, Hans Hans de Goede (7): ASoC: rt5645: Drop double EF20 entry from dmi_platform_data[] ASoC: rt5645: Add platform-data for Acer Switch V 10 ASoC: rt5645: Refactor rt5645_parse_dt() ASoC: rt5645: Add rt5645_get_pdata() helper ASoC: rt5645: Add a rt5645_components() helper ASoC: rt5645: Add mono speaker information to the components string ASoC: Intel: cht_bsw_rt5645: Set card.components string sound/soc/codecs/rt5645.c | 113 +++++++++++++++--------- sound/soc/codecs/rt5645.h | 3 + sound/soc/intel/boards/cht_bsw_rt5645.c | 8 ++ 3 files changed, 83 insertions(+), 41 deletions(-) -- 2.41.0

2 8

[PATCH V2 1/2] ASoC: amd: acp: add Kconfig options for acp7.0 based platform driver
by Syed Saba Kareem 18 Dec '23

18 Dec '23

ACP7.0 based platform legacy drivers can be built by selecting necessary kernel config option. This patch enables build support of the same. Signed-off-by: Syed Saba Kareem <Syed.SabaKareem(a)amd.com> --- changes since v1: - added missing commit message. sound/soc/amd/acp/Kconfig | 12 ++++++++++++ sound/soc/amd/acp/Makefile | 2 ++ 2 files changed, 14 insertions(+) diff --git a/sound/soc/amd/acp/Kconfig b/sound/soc/amd/acp/Kconfig index 5fb322212938..c8ac0027f741 100644 --- a/sound/soc/amd/acp/Kconfig +++ b/sound/soc/amd/acp/Kconfig @@ -73,6 +73,18 @@ config SND_AMD_ASOC_ACP63 Say Y if you want to enable AUDIO on ACP6.3 If unsure select "N". +config SND_AMD_ASOC_ACP70 + tristate "AMD ACP ASOC Acp7.0 Support" + depends on X86 && PCI + depends on ACPI + select SND_SOC_AMD_ACP_PCM + select SND_SOC_AMD_ACP_I2S + select SND_SOC_AMD_ACP_PDM + help + This option enables Acp7.0 PDM support on AMD platform. + Say Y if you want to enable AUDIO on ACP7.0 + If unsure select "N". + config SND_SOC_AMD_MACH_COMMON tristate depends on X86 && PCI && I2C diff --git a/sound/soc/amd/acp/Makefile b/sound/soc/amd/acp/Makefile index dd85700f1c5f..ff5f7893b81e 100644 --- a/sound/soc/amd/acp/Makefile +++ b/sound/soc/amd/acp/Makefile @@ -15,6 +15,7 @@ snd-acp-pci-objs := acp-pci.o snd-acp-renoir-objs := acp-renoir.o snd-acp-rembrandt-objs := acp-rembrandt.o snd-acp63-objs := acp63.o +snd-acp70-objs := acp70.o #machine specific driver snd-acp-mach-objs := acp-mach-common.o @@ -30,6 +31,7 @@ obj-$(CONFIG_SND_SOC_AMD_ACP_PCI) += snd-acp-pci.o obj-$(CONFIG_SND_AMD_ASOC_RENOIR) += snd-acp-renoir.o obj-$(CONFIG_SND_AMD_ASOC_REMBRANDT) += snd-acp-rembrandt.o obj-$(CONFIG_SND_AMD_ASOC_ACP63) += snd-acp63.o +obj-$(CONFIG_SND_AMD_ASOC_ACP70) += snd-acp70.o obj-$(CONFIG_SND_SOC_AMD_MACH_COMMON) += snd-acp-mach.o obj-$(CONFIG_SND_SOC_AMD_LEGACY_MACH) += snd-acp-legacy-mach.o -- 2.25.1

7 8

[PATCH] ASoC: hdmi-codec: register hpd callback on component probe
by Jerome Brunet 18 Dec '23

18 Dec '23

The HDMI hotplug callback to the hdmi-codec is currently registered when jack is set. The hotplug not only serves to report the ASoC jack state but also to get the ELD. It should be registered when the component probes instead, so it does not depend on the card driver registering a jack for the HDMI to properly report the ELD. Fixes: 25ce4f2b3593 ("ASoC: hdmi-codec: Get ELD in before reporting plugged event") Signed-off-by: Jerome Brunet <jbrunet(a)baylibre.com> --- sound/soc/codecs/hdmi-codec.c | 27 +++++++++++++++++++-------- 1 file changed, 19 insertions(+), 8 deletions(-) diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c index 09eef6042aad..20da1eaa4f1c 100644 --- a/sound/soc/codecs/hdmi-codec.c +++ b/sound/soc/codecs/hdmi-codec.c @@ -877,18 +877,13 @@ static int hdmi_codec_set_jack(struct snd_soc_component *component, void *data) { struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component); - int ret = -ENOTSUPP; if (hcp->hcd.ops->hook_plugged_cb) { hcp->jack = jack; - ret = hcp->hcd.ops->hook_plugged_cb(component->dev->parent, - hcp->hcd.data, - plugged_cb, - component->dev); - if (ret) - hcp->jack = NULL; + return 0; } - return ret; + + return -ENOTSUPP; } static int hdmi_dai_spdif_probe(struct snd_soc_dai *dai) @@ -982,6 +977,21 @@ static int hdmi_of_xlate_dai_id(struct snd_soc_component *component, return ret; } +static int hdmi_probe(struct snd_soc_component *component) +{ + struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component); + int ret = 0; + + if (hcp->hcd.ops->hook_plugged_cb) { + ret = hcp->hcd.ops->hook_plugged_cb(component->dev->parent, + hcp->hcd.data, + plugged_cb, + component->dev); + } + + return ret; +} + static void hdmi_remove(struct snd_soc_component *component) { struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component); @@ -992,6 +1002,7 @@ static void hdmi_remove(struct snd_soc_component *component) } static const struct snd_soc_component_driver hdmi_driver = { + .probe = hdmi_probe, .remove = hdmi_remove, .dapm_widgets = hdmi_widgets, .num_dapm_widgets = ARRAY_SIZE(hdmi_widgets), -- 2.42.0

4 6

[PATCH v4 0/2] ASoC: audio-graph-card2: Introduce playback-only/capture-only DAI link flags
by Daniel Baluta 14 Dec '23

14 Dec '23

From: Daniel Baluta <daniel.baluta(a)nxp.com> This patchseries allows users to specify a link only direction with audio-graph-card2. Changes since v1 - https://lore.kernel.org/lkml/20230801082433.548206-1-daniel.baluta@oss.nxp.… - used audio-graph-card2 instead of simple-card as we are deprecting simple-card. Changes since v2: - Fix device tree binding error reported by Rob Changes since v3: - Add signed-off-by line to patch 1/2 - Enhance commit messsage for patch 1/2 to explain why the patch is needed. Daniel Baluta (2): ASoC: audio-graph-card2: Introduce playback-only/capture-only DAI link flags ASoC: dt-bindings: audio-graph-port: Document new DAI link flags playback-only/capture-only .../bindings/sound/audio-graph-port.yaml | 6 ++++++ include/sound/simple_card_utils.h | 3 +++ sound/soc/generic/audio-graph-card2.c | 6 ++++++ sound/soc/generic/simple-card-utils.c | 19 +++++++++++++++++++ 4 files changed, 34 insertions(+) -- 2.25.1

3 4