November 2023 - Alsa-devel - mailman.alsa-project.org

[PATCH v11 00/10] spi: Add support for stacked/parallel memories
by Amit Kumar Mahapatra 19 Aug '24

19 Aug '24

This patch series updated the spi-nor, spi core and the AMD-Xilinx GQSPI driver to add stacked and parallel memories support. The first nine patches https://lore.kernel.org/all/20230119185342.2093323-1-amit.kumar-mahapatra@a… https://lore.kernel.org/all/20230310173217.3429788-2-amit.kumar-mahapatra@a… https://lore.kernel.org/all/20230310173217.3429788-3-amit.kumar-mahapatra@a… https://lore.kernel.org/all/20230310173217.3429788-4-amit.kumar-mahapatra@a… https://lore.kernel.org/all/20230310173217.3429788-5-amit.kumar-mahapatra@a… https://lore.kernel.org/all/20230310173217.3429788-6-amit.kumar-mahapatra@a… https://lore.kernel.org/all/20230310173217.3429788-7-amit.kumar-mahapatra@a… https://lore.kernel.org/all/20230310173217.3429788-8-amit.kumar-mahapatra@a… https://lore.kernel.org/all/20230310173217.3429788-9-amit.kumar-mahapatra@a… of the previous series got applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next But the rest of the patches in the series did not get applied as failure was reported for spi driver with GPIO CS, so send the remaining patches in the series after rebasing it on top of for-next branch and fixing the issue. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirr… --- BRANCH: for-next Changes in v11: - Rebased patch series on top of latest for-next branch. - Added a new patch(1/10) to replace spi->chip_select with spi_get_chipselect() call in tps6594-spi.c. - Added a new patch(2/10) to replace spi->chip_select with spi_get_chipseletc() call in cs35l56_hda_spi.c. - In spi.c initialized unused CS[] to 0xff and spi->cs_index_mask to 0x01 in all flows. - Updated spi_dev_check() to compare the CS of old spi device with the new spi device CS. - Updated cover letter description to add information regarding GPIO CS testing and added Stefen's Tested-by tag in 3/10 patch. Changes in v10: - Rebased patch series on top of latest for-next branch and fixed merge conflicts. Changes in v9: - Updated 1/8 patch description to add an high-level overview of parallel(multi-cs) & stacked design. - Initialized all unused CS to 0xFF. - Moved CS check from spi_add_device() to __spi_add_device(). - Updated __spi_add_device() to check to make sure that multiple logical CS don't map to the same physical CS and same physical CS doesn't map to different logical CS. - Updated 1/8, 5/8 & 7/8 to support arbitrary number of flash devices connected in parallel or stacked mode. - Updated documentation for chip_select. - Added a new spi-nor structure member nor->num_flash to keep track of the number of flashes connected. - Added a new patch in the series 4/8 to move write_enable call just before spi_mem ops call in SPI-NOR. - Added comments in SPI core & SPI-NOR. - Rebased the patch series on top of the latest for-next branch. Changes in v8: - Updated __spi_add_device() and spi_set_cs() to fix spi driver failure with GPIO CS. - Rebased the patch series on top of latest for-next branch and fixed merge conflicts. - Updated cover letter description to add information regarding GPIO CS testing and request Stefan to provide his Tested-by tag for 1/7 patch. - Updated 1/7 patch description. Changes in v7: - Updated spi_dev_check() to avoid failures for spi driver GPIO CS and moved the error message from __spi_add_device() to spi_dev_check(). - Resolved code indentation issue in spi_set_cs(). - In spi_set_cs() call spi_delay_exec( ) once if the controller supports multi cs with both the CS backed by GPIO. - Updated __spi_validate()to add checks for both the GPIO CS. - Replaced cs_index_mask bit mask with SPI_CS_CNT_MAX. - Updated struct spi_controller to represent multi CS capability of the spi controller through a flag bit SPI_CONTROLLER_MULTI_CS instead of a boolen structure member "multi_cs_cap". - Updated 1/7 patch description . Changes in v6: - Rebased on top of latest v6.3-rc1 and fixed merge conflicts in spi-mpc512x-psc.c, sfdp.c, spansion.c files and removed spi-omap-100k.c. - Updated spi_dev_check( ) to reject new devices if any one of the chipselect is used by another device. Changes in v5: - Rebased the patches on top of v6.3-rc1 and fixed the merge conflicts. - Fixed compilation warnings in spi-sh-msiof.c with shmobile_defconfig Changes in v4: - Fixed build error in spi-pl022.c file - reported by Mark. - Fixed build error in spi-sn-f-ospi.c file. - Added Reviewed-by: Serge Semin <fancer.lancer(a)gmail.com> tag. - Added two more patches to replace spi->chip_select with API calls in mpc832x_rdb.c & cs35l41_hda_spi.c files. Changes in v3: - Rebased the patches on top of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next - Added a patch to convert spi_nor_otp_region_len(nor) & spi_nor_otp_n_regions(nor) macros into inline functions - Added Reviewed-by & Acked-by tags Changes in v2: - Rebased the patches on top of v6.2-rc1 - Created separate patch to add get & set APIs for spi->chip_select & spi->cs_gpiod, and replaced all spi->chip_select and spi->cs_gpiod references with the API calls. - Created separate patch to add get & set APIs for nor->params. --- Amit Kumar Mahapatra (10): mfd: tps6594: Use set/get APIs to access spi->chip_select ALSA: hda/cs35l56: Use set/get APIs to access spi->chip_select spi: Add multi-cs memories support in SPI core mtd: spi-nor: Convert macros with inline functions mtd: spi-nor: Add APIs to set/get nor->params mtd: spi-nor: Move write enable inside specific write & erase APIs mtd: spi-nor: Add stacked memories support in spi-nor spi: spi-zynqmp-gqspi: Add stacked memories support in GQSPI driver mtd: spi-nor: Add parallel memories support in spi-nor spi: spi-zynqmp-gqspi: Add parallel memories support in GQSPI driver drivers/mfd/tps6594-spi.c | 2 +- drivers/mtd/spi-nor/atmel.c | 17 +- drivers/mtd/spi-nor/core.c | 683 +++++++++++++++++++++++++------ drivers/mtd/spi-nor/core.h | 8 + drivers/mtd/spi-nor/debugfs.c | 4 +- drivers/mtd/spi-nor/gigadevice.c | 4 +- drivers/mtd/spi-nor/issi.c | 11 +- drivers/mtd/spi-nor/macronix.c | 10 +- drivers/mtd/spi-nor/micron-st.c | 35 +- drivers/mtd/spi-nor/otp.c | 48 ++- drivers/mtd/spi-nor/sfdp.c | 33 +- drivers/mtd/spi-nor/spansion.c | 57 +-- drivers/mtd/spi-nor/sst.c | 7 +- drivers/mtd/spi-nor/swp.c | 25 +- drivers/mtd/spi-nor/winbond.c | 2 +- drivers/mtd/spi-nor/xilinx.c | 18 +- drivers/spi/spi-zynqmp-gqspi.c | 58 ++- drivers/spi/spi.c | 259 ++++++++++-- include/linux/mtd/spi-nor.h | 21 +- include/linux/spi/spi.h | 51 ++- sound/pci/hda/cs35l56_hda_spi.c | 2 +- 21 files changed, 1085 insertions(+), 270 deletions(-) -- 2.17.1

10 61

[alsa-devel] unsupported variant of snd_hda_intel
by Alexandre 04 Jul '24

04 Jul '24

Hello, I have an Acer Aspire 4736G laptop. The soundcard that is shipped in this laptop is intel-hda based as shown (actually it's a realtek): cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0x9b300000 irq 46 Basic sound output is correct but few feature are missing: - internal mic seems to be found but do not works. - sound output stop working when trying to send it using HDMI output - heads do not work when plugged neither when forcing pulseaudio to use it. I have an ubuntu 10.10 which is shipped with alsa 1.0.23. I have googled around and tried loading the snd-hda-intel with several parameters () as found in HD-Audio-Models.txt to no avail. cat /proc/asound/pcm 00-00: ALC888 Analog : ALC888 Analog : playback 1 : capture 1 00-01: ALC888 Digital : ALC888 Digital : playback 1 00-03: NVIDIA HDMI : NVIDIA HDMI : playback 1 Where can I begin to help implement the support for this sound card? I have very skills in developement in general but am ready to try if it is not to hard (I supose I can use previous code for similar models).. I just need a shepherd. Thanks

4 4

[PATCH v4 0/7] Patches to update for rockchip pdm
by Sugar Zhang 23 Apr '24

23 Apr '24

These patches fixup or update for rockchip pdm. Changes in v4: - Acked by Rob Herring Changes in v3: - Fix property 'path-map' suggested by Rob Herring. Changes in v2: - Fix yamllint errors. Sugar Zhang (7): ASoC: rockchip: Add support for rv1126 pdm ASoC: dt-bindings: rockchip: Add binding for rv1126 pdm ASoC: rockchip: pdm: Add support for rk3568 pdm ASoC: dt-bindings: rockchip: Add binding for rk3568 pdm ASoC: rockchip: pdm: Add support for path map ASoC: dt-bindings: rockchip: pdm: Document property 'rockchip,path-map' ASoC: dt-bindings: rockchip: Convert pdm bindings to yaml .../devicetree/bindings/sound/rockchip,pdm.txt | 46 -------- .../devicetree/bindings/sound/rockchip,pdm.yaml | 120 +++++++++++++++++++++ sound/soc/rockchip/rockchip_pdm.c | 112 +++++++++++++++++-- sound/soc/rockchip/rockchip_pdm.h | 6 ++ 4 files changed, 232 insertions(+), 52 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/rockchip,pdm.txt create mode 100644 Documentation/devicetree/bindings/sound/rockchip,pdm.yaml -- 2.7.4

3 9

[PATCH 0/2] ALSA/ASoC/SOF: SSP dev_type support
by Peter Ujfalusi 26 Mar '24

26 Mar '24

Hi, SOF always passed 0 as dev_type to intel_nhlt_get_endpoint_blob() when looking up the blob from the NHLT table. This causes issues since alsa-utils commit 3a47ef2487ed ("topology: nhlt: intel: support more device types and directions") The dev_type is no longer always 0 in the topology embedded NHLT table resulting lookup failures for analog codecs since they will have dev_type=4. With SOF the dev_type is not used, we always use the SSP port index for looking up the configuration blob. The solution for the issue is to fetch the dev_type for the SSP port and feed it back to the intel_nhlt_get_endpoint_blob() to be able to find the configuration regardless of the assigned dev_type. Regards, Peter --- Brent Lu (2): ALSA: hda: intel-nhlt: add intel_nhlt_ssp_device_type() function ASoC: SOF: ipc4-topology: support NHLT device type include/sound/intel-nhlt.h | 10 ++++++++++ sound/hda/intel-nhlt.c | 26 ++++++++++++++++++++++++++ sound/soc/sof/ipc4-topology.c | 19 ++++++++++++++++--- 3 files changed, 52 insertions(+), 3 deletions(-) -- 2.43.0

3 6

[PATCH v9 00/27] Add support for QMC HDLC, framer infrastructure and PEF2256 framer
by Herve Codina 14 Mar '24

14 Mar '24

Hi, I have a system where I need to handle an HDLC interface and some audio data. The HDLC data are transferred using a TDM bus on which a PEF2256 (E1/T1 framer) is present. The PEF2256 transfers data from/to the TDM bus to/from the E1 line. This PEF2256 is connected to a PowerQUICC SoC for the control path and the TDM is connected to the SoC (QMC component) for the data path. From the QMC HDLC driver, I need to handle HDLC data using the QMC, carrier detection using the PEF2256 (E1 line carrier) and set/get some PEF2256 configuration. The QMC HDLC driver considers the PEF2256 as a generic framer. It performs operations that involve the PEF2256 through the generic framer API. The audio data are exchanged with the PEF2256 using a CPU DAI connected to the TDM bus through the QMC and the PEF2256 needs to be seen as a codec in order to be linked to the CPU DAI. The codec handles the carrier detection using the PEF2256 and reports the carrier state to the ALSA subsystem using the ASoC jack detection. The codec, even if instantiated by the PEF2256 driver, considers the PEF2256 as a generic framer. The generic framer has: - 2 consumers (QMC HDLC drv and codec) - 1 provider (PEF2256) So, the design is the following: +------------------+ +---------+ | QMC | <- TDM -> | PEF2256 | <-> E1 +---------+ | +-------------+ | | | | CPU DAI | <-data--> | QMC channel | | | | +---------+ | +-------------+ | | | +--------------+ | +-------------+ | | | | QMC HDLC drv | <-data--> | QMC channel | | | | +--------------+ | +-------------+ | | | ^ +------------------+ | | | +--------+ +-------------+ | | +-> | framer | <-> | PEF2256 drv | <- local bus ->| | | | | | +---------+ +-> | | | | | +--------+ | +-------+ | +-------------------> | codec | | | +-------+ | +-------------+ Further more, the TDM timeslots used by the QMC HDLC driver need to be configured at runtime (QMC dynamic timeslots). Several weeks ago, I sent two series related to this topic: - Add the Lantiq PEF2256 audio support [1] - RFC Add support for QMC HDLC and PHY [2] This current series is a rework of these two series taking into account feedbacks previously received. In order to implement all of this, I do the following: 1) Perform some fixes (patches 1, 2, 3, 4, 5 ) 2) Introduce the QMC HDLC driver (patches 6, 7, 8) 3) Add QMC dynamic timeslot support (patches 9 - 19) 4) Add timeslots change support in QMC HDLC (patch 20) 5) Introduce framer infrastructure (patch 21) 6) Add PEF2256 framer provider (patches 22, 23, 24, 25) 7) Add framer codec as a framer consumer (patch 26) 8) Add framer support as a framer consumer in QMC HDLC (patch 27) The series contains the full story and detailed modifications. If needed, the series can be split and/or commits can be squashed. Let me know. Compare to the previous iteration https://lore.kernel.org/linux-kernel/20231011061437.64213-1-herve.codina@bo… This v9 series: - Removes some patches already applied - Adds some 'Acked-by' tags Best regards, Hervé [1]: https://lore.kernel.org/all/20230417171601.74656-1-herve.codina@bootlin.com/ [2]: https://lore.kernel.org/all/20230323103154.264546-1-herve.codina@bootlin.co… Changes v8 -> v9 - Removed Patches 6, 7 and 8 (patches applied) - Patches 7, 20, 21, 23 (patches 10, 23, 24, 26 in v8) Add 'Acked-by: Jakub Kicinski <kuba(a)kernel.org>' Changes v7 -> v8 - Patch 10 Fix a race condition when stopping the queue in qmc_hdlc_close() - Patch 24 Move to menuconfig and hide CONFIG_GENERIC_FRAMER Remove unneeded check (defensive programming) Remove unneeded variable assignment - Patch 25 Add 'Reviewed-by: Rob Herring <robh(a)kernel.org>' - Patch 26 Use array notation for 'audio_devs' Changes v6 -> v7 - Patch 8 Move the 'compatible' property to the first property. Add device/SoC specific compatible strings. Add 'Reviewed-by: Rob Herring <robh(a)kernel.org>' - Patch 25 Remove '$ref' from the lantiq,data-rate-bps property. '-bps' is now a standard suffix. Changes v5 -> v6 - All patches Remove 'Signed-off-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' These Sob were added by Christophe when he sent the v4 while I was on vacation. https://lore.kernel.org/linux-kernel/992a2b31-e21f-eee3-8bfc-a65b69fe5bd7@c… - Patch 6, 7 Add 'Acked-by: Conor Dooley <conor.dooley(a)microchip.com>' Add 'Acked-by: Rob Herring <robh(a)kernel.org>' - Patch 8 Add a constraint on fsl,framer. - Patch 25 Fix clocks description (inconsistent capitalisation) Use '8-bit' instead of '8bit' Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Removed patch 26 (patch applied) - Patch 26 (patch 27 in v5) Add 'Reviewed-by: Linus Walleij <linus.walleij(a)linaro.org>' - Patch 27 (patch 28 in v5) Move registers definition to .c file and remove .h file Add 'select PINCONF' in Kconfig Use dev_err_probe() Add 'Reviewed-by: Linus Walleij <linus.walleij(a)linaro.org>' - Patch 28 (patch 29 in v5) Remove .h file Changes v4 -> v5 - Patches 1 to 5 No changes - Patch 6 (new in v5) Fix QMC binding example - Patch 7 (new in v5) Add missing 'additionalProperties: false' - Patch 8 (new in v5, replace v4 patch 6) Add QMC HDLC properties in the QMC channel node Renamed the 'framer' property to 'fsl,framer' - Patch 9 (new in v5) Add support for QMC child devices - Patch 10 (patch 7 in v4) No changes - Patch 11 (patch 8 in v4) Remove fsl,qmc-hdlc.yaml (no more existing file) - Patches 12 to 22 (patches 9 to 19 in v4) No changes - Patch 23 (patch 20 in v4) Remove unused variable initializations Remove extra space - Patch 24 (patch 21 in v4) Improve Kconfig help text Fix variable declaration (reverse xmas tree) Fix typos and extra spaces Fix documentation issues raised by 'kernel-doc -none' Move of_node_put() and kfree() out of the mutex Replace ida_simple_{get,remove}() by ida_{alloc,free}() Support framer device-tree nodes without '#framer-cells' property - Patch 25 (patch 22 in v4) Fix $ref in the pinctrl subnode Remove '#framer-cells' property Add needed '|' - Patch 26 (patch 23 in v4) Fix a typo in the commit subject - Patches 27, 28, 29 (patch 24, 25, 26 in v4) No changes - Patch 30 (patch 27 in v4) Fix a typo in the commit log - Patch 31 (patch 28 in v4) Used 'fsl,framer' property name instead of 'framer' Changes v3 -> v4 - Patch 21 Fixes build failure with CONFIG_MODULES Changes v2 -> v3 - Patches 1, 2, 3, 4 Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - New patch Remove inline keyword from the existing registers accessors helpers - Patch 6 (patches 5, 27 in v2) Update the binding title Squash patch 27 - Patch 7 (patch 6 in v2) Remove the cast in netdev_to_qmc_hdlc() Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Patch 8 (patch 7 in v2): No change - Patches 9, 10 (patches 8, 9 in v2) Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Patch 11 (patch 10 in v2) Remove inline keyword from the introduced qmc_clrsetbits16() helper Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Patches 12, 13, 14, 15, 16, 17, 18, 19, 20 Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Patch 21 (patch 20 in v2) Remove unneeded framer NULL pointer check Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Patch 22 (patch 21 in v2) Change sclkr and sclkx clocks description Remove the framer phandle property from the framer subnodes (ie. from framer-codec nodes) - Patch 23 (patch 22 in v2) Initialize 'disabled' variable at declaration Fix commit log Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Patch 24 (patch 23 in v2) Remove inline keyword from the existing registers accessors helpers Use dev_warn_ratelimited() in default interrupt handler Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Patch 25 (patch 24 in v2) Replace #include "linux/bitfield.h" by #include <linux/bitfield.h> Fold the pinctrl anonymous struct into the struct pef2256_pinctrl Update commit log Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Patch 26 (patch 25 in v2) Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Patch 27 (patch 26 in v2) Fix error message Changed the ch.max computation in framer_dai_hw_rule_channels_by_format() Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Patch 28 Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' Changes v1 -> v2 - Patches 1, 2 (New in v2) Fix __iomem addresses declaration - Patch 19 (17 in v1) Fix a compilation warning - Patch 26 (24 in v1) Fix a typo in Kconfig file Fix issues raised by sparse (make C=1) Herve Codina (27): soc: fsl: cpm1: tsa: Fix __iomem addresses declaration soc: fsl: cpm1: qmc: Fix __iomem addresses declaration soc: fsl: cpm1: qmc: Fix rx channel reset soc: fsl: cpm1: qmc: Extend the API to provide Rx status soc: fsl: cpm1: qmc: Remove inline function specifiers soc: fsl: cpm1: qmc: Add support for child devices net: wan: Add support for QMC HDLC MAINTAINERS: Add the Freescale QMC HDLC driver entry soc: fsl: cpm1: qmc: Introduce available timeslots masks soc: fsl: cpm1: qmc: Rename qmc_setup_tsa* to qmc_init_tsa* soc: fsl: cpm1: qmc: Introduce qmc_chan_setup_tsa* soc: fsl: cpm1: qmc: Remove no more needed checks from qmc_check_chans() soc: fsl: cpm1: qmc: Check available timeslots in qmc_check_chans() soc: fsl: cpm1: qmc: Add support for disabling channel TSA entries soc: fsl: cpm1: qmc: Split Tx and Rx TSA entries setup soc: fsl: cpm1: qmc: Introduce is_tsa_64rxtx flag soc: fsl: cpm1: qmc: Handle timeslot entries at channel start() and stop() soc: fsl: cpm1: qmc: Remove timeslots handling from setup_chan() soc: fsl: cpm1: qmc: Introduce functions to change timeslots at runtime wan: qmc_hdlc: Add runtime timeslots changes support net: wan: Add framer framework support dt-bindings: net: Add the Lantiq PEF2256 E1/T1/J1 framer net: wan: framer: Add support for the Lantiq PEF2256 framer pinctrl: Add support for the Lantic PEF2256 pinmux MAINTAINERS: Add the Lantiq PEF2256 driver entry ASoC: codecs: Add support for the framer codec net: wan: fsl_qmc_hdlc: Add framer support .../bindings/net/lantiq,pef2256.yaml | 213 +++++ MAINTAINERS | 15 + drivers/net/wan/Kconfig | 14 + drivers/net/wan/Makefile | 3 + drivers/net/wan/framer/Kconfig | 41 + drivers/net/wan/framer/Makefile | 7 + drivers/net/wan/framer/framer-core.c | 882 ++++++++++++++++++ drivers/net/wan/framer/pef2256/Makefile | 8 + drivers/net/wan/framer/pef2256/pef2256-regs.h | 250 +++++ drivers/net/wan/framer/pef2256/pef2256.c | 880 +++++++++++++++++ drivers/net/wan/fsl_qmc_hdlc.c | 820 ++++++++++++++++ drivers/pinctrl/Kconfig | 15 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-pef2256.c | 358 +++++++ drivers/soc/fsl/qe/qmc.c | 592 +++++++++--- drivers/soc/fsl/qe/tsa.c | 22 +- include/linux/framer/framer-provider.h | 194 ++++ include/linux/framer/framer.h | 205 ++++ include/linux/framer/pef2256.h | 31 + include/soc/fsl/qe/qmc.h | 27 +- sound/soc/codecs/Kconfig | 15 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/framer-codec.c | 413 ++++++++ sound/soc/fsl/fsl_qmc_audio.c | 2 +- 24 files changed, 4873 insertions(+), 137 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/lantiq,pef2256.yaml create mode 100644 drivers/net/wan/framer/Kconfig create mode 100644 drivers/net/wan/framer/Makefile create mode 100644 drivers/net/wan/framer/framer-core.c create mode 100644 drivers/net/wan/framer/pef2256/Makefile create mode 100644 drivers/net/wan/framer/pef2256/pef2256-regs.h create mode 100644 drivers/net/wan/framer/pef2256/pef2256.c create mode 100644 drivers/net/wan/fsl_qmc_hdlc.c create mode 100644 drivers/pinctrl/pinctrl-pef2256.c create mode 100644 include/linux/framer/framer-provider.h create mode 100644 include/linux/framer/framer.h create mode 100644 include/linux/framer/pef2256.h create mode 100644 sound/soc/codecs/framer-codec.c -- 2.41.0

6 36

[PATCH v7 0/5] ASoC: makes CPU/Codec channel connection map more generic
by Kuninori Morimoto 14 Mar '24

14 Mar '24

Hi Mark Cc Bard, Pierre-Louis, Jerome, DT-ML This is v7 patch-set. Current ASoC is supporting CPU/Codec = N:M (N < M) connection by using ch_map idea. This patch-set expands it that all connection uses this idea, and no longer N < M limit [1][2]. Link: https://lore.kernel.org/r/87fs6wuszr.wl-kuninori.morimoto.gx@renesas.com [1] Link: https://lore.kernel.org/r/878r7yqeo4.wl-kuninori.morimoto.gx@renesas.com [2] ASoC core code ([PATCH 1/5]) is same as v6 and it was tested by Pierre-Louis, and Jerome. Big change on v7 is basically for Audio-Graph-Card2. v6 -> v7 - use "endpoint" for N:M connection instead of ch-map-idx on Audio-Graph-Card2 v5 -> v6 - tidyup some warnings - rename "ch-map-idx" -> "channel-map-index" - Update "channel-map-index" description - add Tested-by from Pierre-Louis / Jerome v4 -> v5 - use cpu/codec index on ch_maps - separate card2 sample DT patch into prepare and new feature - ch-maps -> ch-map-idx on DT v3 -> v4 - add Jerome on To - add "description" on "ch-maps" v2 -> v3 - tidyup comment - use more clear connection image on DT - "ch_maps" -> "ch-maps" on DT - Add DT maintainer on "To:" for all patches v1 -> v2 - makes CPU/Codec connection relation clear on comment/sample - fixup type "connction" -> "connection" - makes error message clear Kuninori Morimoto (5): ASoC: makes CPU/Codec channel connection map more generic ASoC: audio-graph-card2: use better image for Multi connection ASoC: audio-graph-card2: add CPU:Codec = N:M support ASoC: audio-graph-card2-custom-sample: Add connection image ASoC: audio-graph-card2-custom-sample: add CPU/Codec = N:M sample include/sound/soc.h | 56 ++- .../audio-graph-card2-custom-sample.dtsi | 380 ++++++++++++++++-- sound/soc/generic/audio-graph-card2.c | 277 ++++++++++--- sound/soc/intel/boards/sof_sdw.c | 28 +- sound/soc/soc-core.c | 95 ++++- sound/soc/soc-dapm.c | 45 +-- sound/soc/soc-pcm.c | 44 +- 7 files changed, 754 insertions(+), 171 deletions(-) -- 2.25.1

3 15

[PATCH v3] powerpc: macio: Make remove callback of macio driver void returned
by Dawei Li 13 Mar '24

13 Mar '24

Commit fc7a6209d571 ("bus: Make remove callback return void") forces bus_type::remove be void-returned, it doesn't make much sense for any bus based driver implementing remove callbalk to return non-void to its caller. This change is for macio bus based drivers. Signed-off-by: Dawei Li <set_pte_at(a)outlook.com> --- v2 -> v3 - Rebased on latest powerpc/next. - cc' to relevant subsysem lists. v1 -> v2 - Revert unneeded changes. - Rebased on latest powerpc/next. v1 - https://lore.kernel.org/all/TYCP286MB2323FCDC7ECD87F8D97CB74BCA189@TYCP286M… --- arch/powerpc/include/asm/macio.h | 2 +- drivers/ata/pata_macio.c | 4 +--- drivers/macintosh/rack-meter.c | 4 +--- drivers/net/ethernet/apple/bmac.c | 4 +--- drivers/net/ethernet/apple/mace.c | 4 +--- drivers/net/wireless/intersil/orinoco/airport.c | 4 +--- drivers/scsi/mac53c94.c | 5 +---- drivers/scsi/mesh.c | 5 +---- drivers/tty/serial/pmac_zilog.c | 7 ++----- sound/aoa/soundbus/i2sbus/core.c | 4 +--- 10 files changed, 11 insertions(+), 32 deletions(-) diff --git a/arch/powerpc/include/asm/macio.h b/arch/powerpc/include/asm/macio.h index ff5fd82d9ff0..cb9c386dacf8 100644 --- a/arch/powerpc/include/asm/macio.h +++ b/arch/powerpc/include/asm/macio.h @@ -125,7 +125,7 @@ static inline struct pci_dev *macio_get_pci_dev(struct macio_dev *mdev) struct macio_driver { int (*probe)(struct macio_dev* dev, const struct of_device_id *match); - int (*remove)(struct macio_dev* dev); + void (*remove)(struct macio_dev *dev); int (*suspend)(struct macio_dev* dev, pm_message_t state); int (*resume)(struct macio_dev* dev); diff --git a/drivers/ata/pata_macio.c b/drivers/ata/pata_macio.c index 9ccaac9e2bc3..653106716a4b 100644 --- a/drivers/ata/pata_macio.c +++ b/drivers/ata/pata_macio.c @@ -1187,7 +1187,7 @@ static int pata_macio_attach(struct macio_dev *mdev, return rc; } -static int pata_macio_detach(struct macio_dev *mdev) +static void pata_macio_detach(struct macio_dev *mdev) { struct ata_host *host = macio_get_drvdata(mdev); struct pata_macio_priv *priv = host->private_data; @@ -1202,8 +1202,6 @@ static int pata_macio_detach(struct macio_dev *mdev) ata_host_detach(host); unlock_media_bay(priv->mdev->media_bay); - - return 0; } #ifdef CONFIG_PM_SLEEP diff --git a/drivers/macintosh/rack-meter.c b/drivers/macintosh/rack-meter.c index c28893e41a8b..f2f83c4f3af5 100644 --- a/drivers/macintosh/rack-meter.c +++ b/drivers/macintosh/rack-meter.c @@ -523,7 +523,7 @@ static int rackmeter_probe(struct macio_dev* mdev, return rc; } -static int rackmeter_remove(struct macio_dev* mdev) +static void rackmeter_remove(struct macio_dev *mdev) { struct rackmeter *rm = dev_get_drvdata(&mdev->ofdev.dev); @@ -558,8 +558,6 @@ static int rackmeter_remove(struct macio_dev* mdev) /* Get rid of me */ kfree(rm); - - return 0; } static int rackmeter_shutdown(struct macio_dev* mdev) diff --git a/drivers/net/ethernet/apple/bmac.c b/drivers/net/ethernet/apple/bmac.c index 9e653e2925f7..292b1f9cd9e7 100644 --- a/drivers/net/ethernet/apple/bmac.c +++ b/drivers/net/ethernet/apple/bmac.c @@ -1591,7 +1591,7 @@ bmac_proc_info(char *buffer, char **start, off_t offset, int length) } #endif -static int bmac_remove(struct macio_dev *mdev) +static void bmac_remove(struct macio_dev *mdev) { struct net_device *dev = macio_get_drvdata(mdev); struct bmac_data *bp = netdev_priv(dev); @@ -1609,8 +1609,6 @@ static int bmac_remove(struct macio_dev *mdev) macio_release_resources(mdev); free_netdev(dev); - - return 0; } static const struct of_device_id bmac_match[] = diff --git a/drivers/net/ethernet/apple/mace.c b/drivers/net/ethernet/apple/mace.c index fd1b008b7208..e6350971c707 100644 --- a/drivers/net/ethernet/apple/mace.c +++ b/drivers/net/ethernet/apple/mace.c @@ -272,7 +272,7 @@ static int mace_probe(struct macio_dev *mdev, const struct of_device_id *match) return rc; } -static int mace_remove(struct macio_dev *mdev) +static void mace_remove(struct macio_dev *mdev) { struct net_device *dev = macio_get_drvdata(mdev); struct mace_data *mp; @@ -296,8 +296,6 @@ static int mace_remove(struct macio_dev *mdev) free_netdev(dev); macio_release_resources(mdev); - - return 0; } static void dbdma_reset(volatile struct dbdma_regs __iomem *dma) diff --git a/drivers/net/wireless/intersil/orinoco/airport.c b/drivers/net/wireless/intersil/orinoco/airport.c index a890bfa0d5cc..276a06cdd1f5 100644 --- a/drivers/net/wireless/intersil/orinoco/airport.c +++ b/drivers/net/wireless/intersil/orinoco/airport.c @@ -85,7 +85,7 @@ airport_resume(struct macio_dev *mdev) return err; } -static int +static void airport_detach(struct macio_dev *mdev) { struct orinoco_private *priv = dev_get_drvdata(&mdev->ofdev.dev); @@ -111,8 +111,6 @@ airport_detach(struct macio_dev *mdev) macio_set_drvdata(mdev, NULL); free_orinocodev(priv); - - return 0; } static int airport_hard_reset(struct orinoco_private *priv) diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c index f75928f7773e..42648ca9b8ed 100644 --- a/drivers/scsi/mac53c94.c +++ b/drivers/scsi/mac53c94.c @@ -508,7 +508,7 @@ static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *mat return rc; } -static int mac53c94_remove(struct macio_dev *mdev) +static void mac53c94_remove(struct macio_dev *mdev) { struct fsc_state *fp = (struct fsc_state *)macio_get_drvdata(mdev); struct Scsi_Host *host = fp->host; @@ -526,11 +526,8 @@ static int mac53c94_remove(struct macio_dev *mdev) scsi_host_put(host); macio_release_resources(mdev); - - return 0; } - static struct of_device_id mac53c94_match[] = { { diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c index 84b541a57b7b..cd2575b88c85 100644 --- a/drivers/scsi/mesh.c +++ b/drivers/scsi/mesh.c @@ -1986,7 +1986,7 @@ static int mesh_probe(struct macio_dev *mdev, const struct of_device_id *match) return -ENODEV; } -static int mesh_remove(struct macio_dev *mdev) +static void mesh_remove(struct macio_dev *mdev) { struct mesh_state *ms = (struct mesh_state *)macio_get_drvdata(mdev); struct Scsi_Host *mesh_host = ms->host; @@ -2013,11 +2013,8 @@ static int mesh_remove(struct macio_dev *mdev) macio_release_resources(mdev); scsi_host_put(mesh_host); - - return 0; } - static struct of_device_id mesh_match[] = { { diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c index 13668ffdb1e7..d4640479c338 100644 --- a/drivers/tty/serial/pmac_zilog.c +++ b/drivers/tty/serial/pmac_zilog.c @@ -1507,12 +1507,12 @@ static int pmz_attach(struct macio_dev *mdev, const struct of_device_id *match) * That one should not be called, macio isn't really a hotswap device, * we don't expect one of those serial ports to go away... */ -static int pmz_detach(struct macio_dev *mdev) +static void pmz_detach(struct macio_dev *mdev) { struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev); if (!uap) - return -ENODEV; + return; uart_remove_one_port(&pmz_uart_reg, &uap->port); @@ -1523,11 +1523,8 @@ static int pmz_detach(struct macio_dev *mdev) dev_set_drvdata(&mdev->ofdev.dev, NULL); uap->dev = NULL; uap->port.dev = NULL; - - return 0; } - static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state) { struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev); diff --git a/sound/aoa/soundbus/i2sbus/core.c b/sound/aoa/soundbus/i2sbus/core.c index 51ed2f34b276..35f39727994d 100644 --- a/sound/aoa/soundbus/i2sbus/core.c +++ b/sound/aoa/soundbus/i2sbus/core.c @@ -364,15 +364,13 @@ static int i2sbus_probe(struct macio_dev* dev, const struct of_device_id *match) return 0; } -static int i2sbus_remove(struct macio_dev* dev) +static void i2sbus_remove(struct macio_dev *dev) { struct i2sbus_control *control = dev_get_drvdata(&dev->ofdev.dev); struct i2sbus_dev *i2sdev, *tmp; list_for_each_entry_safe(i2sdev, tmp, &control->list, item) soundbus_remove_one(&i2sdev->sound); - - return 0; } #ifdef CONFIG_PM -- 2.25.1

6 6

[PATCH] soundwire: Use snd_soc_substream_to_rtd() to obtain rtd
by Amadeusz Sławiński 03 Mar '24

03 Mar '24

From: Cezary Rojewski <cezary.rojewski(a)intel.com> Utilize the helper function instead of casting from ->private_data directly. Signed-off-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> --- drivers/soundwire/stream.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c index 69719b335bcb..652aae4e221d 100644 --- a/drivers/soundwire/stream.c +++ b/drivers/soundwire/stream.c @@ -1717,7 +1717,7 @@ EXPORT_SYMBOL(sdw_deprepare_stream); static int set_stream(struct snd_pcm_substream *substream, struct sdw_stream_runtime *sdw_stream) { - struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream); struct snd_soc_dai *dai; int ret = 0; int i; @@ -1770,7 +1770,7 @@ EXPORT_SYMBOL(sdw_alloc_stream); int sdw_startup_stream(void *sdw_substream) { struct snd_pcm_substream *substream = sdw_substream; - struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream); struct sdw_stream_runtime *sdw_stream; char *name; int ret; @@ -1814,7 +1814,7 @@ EXPORT_SYMBOL(sdw_startup_stream); void sdw_shutdown_stream(void *sdw_substream) { struct snd_pcm_substream *substream = sdw_substream; - struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream); struct sdw_stream_runtime *sdw_stream; struct snd_soc_dai *dai; -- 2.34.1

2 2

[PATCH] ALSA: dice: add stream format parameters for Weiss devices
by Michele Perrone 29 Feb '24

29 Feb '24

Hard-coded stream format parameters are added for Weiss Engineering FireWire devices. When the device vendor and model match, the parameters are copied into the stream format cache. This allows for setting all supported sampling rates up to 192kHz, and consequently adjusting the number of available I/O channels. Signed-off-by: Rolf Anderegg <rolf.anderegg(a)weiss.ch> Signed-off-by: Michele Perrone <michele.perrone(a)weiss.ch> --- sound/firewire/dice/Makefile | 2 +- sound/firewire/dice/dice-weiss.c | 120 +++++++++++++++++++++++++++++++ sound/firewire/dice/dice.c | 72 +++++++++++++++++++ 3 files changed, 193 insertions(+), 1 deletion(-) create mode 100644 sound/firewire/dice/dice-weiss.c diff --git a/sound/firewire/dice/Makefile b/sound/firewire/dice/Makefile index a5f3fbf28b8c..bac8712f9014 100644 --- a/sound/firewire/dice/Makefile +++ b/sound/firewire/dice/Makefile @@ -2,5 +2,5 @@ snd-dice-objs := dice-transaction.o dice-stream.o dice-proc.o dice-midi.o \ dice-pcm.o dice-hwdep.o dice.o dice-tcelectronic.o \ dice-alesis.o dice-extension.o dice-mytek.o dice-presonus.o \ - dice-harman.o dice-focusrite.o + dice-harman.o dice-focusrite.o dice-weiss.o obj-$(CONFIG_SND_DICE) += snd-dice.o diff --git a/sound/firewire/dice/dice-weiss.c b/sound/firewire/dice/dice-weiss.c new file mode 100644 index 000000000000..ad22bfafd324 --- /dev/null +++ b/sound/firewire/dice/dice-weiss.c @@ -0,0 +1,120 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dice-weiss.c - a part of driver for DICE based devices + * + * Copyright (c) 2023 Rolf Anderegg and Michele Perrone + */ + +#include "dice.h" + +struct dice_weiss_spec { + unsigned int tx_pcm_chs[MAX_STREAMS][SND_DICE_RATE_MODE_COUNT]; + unsigned int rx_pcm_chs[MAX_STREAMS][SND_DICE_RATE_MODE_COUNT]; + bool has_midi; +}; + +/* Weiss DAC202: 192kHz 2-channel DAC */ +static const struct dice_weiss_spec dac202 = { + .tx_pcm_chs = {{2, 2, 2}, {0, 0, 0} }, + .rx_pcm_chs = {{2, 2, 2}, {0, 0, 0} }, + .has_midi = false +}; + +/* Weiss MAN301: 192kHz 2-channel music archive network player */ +static const struct dice_weiss_spec man301 = { + .tx_pcm_chs = {{2, 2, 2}, {0, 0, 0} }, + .rx_pcm_chs = {{2, 2, 2}, {0, 0, 0} }, + .has_midi = false +}; + +/* Weiss INT202: 192kHz unidirectional 2-channel digital Firewire interface */ +static const struct dice_weiss_spec int202 = { + .tx_pcm_chs = {{2, 2, 2}, {0, 0, 0} }, + .rx_pcm_chs = {{0, 0, 0}, {0, 0, 0} }, + .has_midi = false +}; + +/* Weiss INT203: 192kHz bidirectional 2-channel digital Firewire interface */ +static const struct dice_weiss_spec int203 = { + .tx_pcm_chs = {{2, 2, 2}, {0, 0, 0} }, + .rx_pcm_chs = {{2, 2, 2}, {0, 0, 0} }, + .has_midi = false +}; + +/* Weiss ADC2: 192kHz A/D converter with microphone preamps and line inputs */ +static const struct dice_weiss_spec adc2 = { + .tx_pcm_chs = {{2, 2, 2}, {0, 0, 0} }, + .rx_pcm_chs = {{2, 2, 2}, {0, 0, 0} }, + .has_midi = false +}; + +/* Weiss DAC2/Minerva: 192kHz 2-channel DAC */ +static const struct dice_weiss_spec dac2_minerva = { + .tx_pcm_chs = {{2, 2, 2}, {0, 0, 0} }, + .rx_pcm_chs = {{2, 2, 2}, {0, 0, 0} }, + .has_midi = false +}; + +/* Weiss Vesta: 192kHz 2-channel Firewire to AES/EBU interface */ +static const struct dice_weiss_spec vesta = { + .tx_pcm_chs = {{2, 2, 2}, {0, 0, 0} }, + .rx_pcm_chs = {{2, 2, 2}, {0, 0, 0} }, + .has_midi = false +}; + +/* Weiss AFI1: 192kHz 24-channel Firewire to ADAT or AES/EBU interface */ +static const struct dice_weiss_spec afi1 = { + .tx_pcm_chs = {{24, 16, 8}, {0, 0, 0} }, + .rx_pcm_chs = {{24, 16, 8}, {0, 0, 0} }, + .has_midi = false +}; + +int snd_dice_detect_weiss_formats(struct snd_dice *dice) +{ + static const struct { + u32 model_id; + const struct dice_weiss_spec *spec; + } *entry, entries[] = { + {0x000007, &dac202}, + {0x000008, &dac202}, /* Maya edition: same audio I/O as DAC202 */ + {0x000006, &int202}, + {0x00000a, &int203}, + {0x00000b, &man301}, + {0x000001, &adc2}, + {0x000003, &dac2_minerva}, + {0x000002, &vesta}, + {0x000004, &afi1}, + }; + struct fw_csr_iterator it; + int key, val, model_id; + int i; + + model_id = 0; + fw_csr_iterator_init(&it, dice->unit->directory); + while (fw_csr_iterator_next(&it, &key, &val)) { + if (key == CSR_MODEL) { + model_id = val; + break; + } + } + + for (i = 0; i < ARRAY_SIZE(entries); ++i) { + entry = entries + i; + if (entry->model_id == model_id) + break; + } + if (i == ARRAY_SIZE(entries)) + return -ENODEV; + + memcpy(dice->tx_pcm_chs, entry->spec->tx_pcm_chs, + MAX_STREAMS * SND_DICE_RATE_MODE_COUNT * sizeof(unsigned int)); + memcpy(dice->rx_pcm_chs, entry->spec->rx_pcm_chs, + MAX_STREAMS * SND_DICE_RATE_MODE_COUNT * sizeof(unsigned int)); + + if (entry->spec->has_midi) { + dice->tx_midi_ports[0] = 1; + dice->rx_midi_ports[0] = 1; + } + + return 0; +} diff --git a/sound/firewire/dice/dice.c b/sound/firewire/dice/dice.c index 6c93e6e4982c..4bcd026a0b3f 100644 --- a/sound/firewire/dice/dice.c +++ b/sound/firewire/dice/dice.c @@ -396,6 +396,78 @@ static const struct ieee1394_device_id dice_id_table[] = { .match_flags = IEEE1394_MATCH_VERSION, .version = DICE_INTERFACE, }, + /* Weiss DAC202: 192kHz 2-channel DAC */ + { + .match_flags = IEEE1394_MATCH_VENDOR_ID | + IEEE1394_MATCH_MODEL_ID, + .vendor_id = OUI_WEISS, + .model_id = 0x000007, + .driver_data = (kernel_ulong_t)snd_dice_detect_weiss_formats, + }, + /* Weiss DAC202: 192kHz 2-channel DAC (Maya edition) */ + { + .match_flags = IEEE1394_MATCH_VENDOR_ID | + IEEE1394_MATCH_MODEL_ID, + .vendor_id = OUI_WEISS, + .model_id = 0x000008, + .driver_data = (kernel_ulong_t)snd_dice_detect_weiss_formats, + }, + /* Weiss MAN301: 192kHz 2-channel music archive network player */ + { + .match_flags = IEEE1394_MATCH_VENDOR_ID | + IEEE1394_MATCH_MODEL_ID, + .vendor_id = OUI_WEISS, + .model_id = 0x00000b, + .driver_data = (kernel_ulong_t)snd_dice_detect_weiss_formats, + }, + /* Weiss INT202: 192kHz unidirectional 2-channel digital Firewire interface */ + { + .match_flags = IEEE1394_MATCH_VENDOR_ID | + IEEE1394_MATCH_MODEL_ID, + .vendor_id = OUI_WEISS, + .model_id = 0x000006, + .driver_data = (kernel_ulong_t)snd_dice_detect_weiss_formats, + }, + /* Weiss INT203: 192kHz bidirectional 2-channel digital Firewire interface */ + { + .match_flags = IEEE1394_MATCH_VENDOR_ID | + IEEE1394_MATCH_MODEL_ID, + .vendor_id = OUI_WEISS, + .model_id = 0x00000a, + .driver_data = (kernel_ulong_t)snd_dice_detect_weiss_formats, + }, + /* Weiss ADC2: 192kHz A/D converter with microphone preamps and line inputs */ + { + .match_flags = IEEE1394_MATCH_VENDOR_ID | + IEEE1394_MATCH_MODEL_ID, + .vendor_id = OUI_WEISS, + .model_id = 0x000001, + .driver_data = (kernel_ulong_t)snd_dice_detect_weiss_formats, + }, + /* Weiss DAC2/Minerva: 192kHz 2-channel DAC */ + { + .match_flags = IEEE1394_MATCH_VENDOR_ID | + IEEE1394_MATCH_MODEL_ID, + .vendor_id = OUI_WEISS, + .model_id = 0x000003, + .driver_data = (kernel_ulong_t)snd_dice_detect_weiss_formats, + }, + /* Weiss Vesta: 192kHz 2-channel Firewire to AES/EBU interface */ + { + .match_flags = IEEE1394_MATCH_VENDOR_ID | + IEEE1394_MATCH_MODEL_ID, + .vendor_id = OUI_WEISS, + .model_id = 0x000002, + .driver_data = (kernel_ulong_t)snd_dice_detect_weiss_formats, + }, + /* Weiss AFI1: 192kHz 24-channel Firewire to ADAT or AES/EBU interface */ + { + .match_flags = IEEE1394_MATCH_VENDOR_ID | + IEEE1394_MATCH_MODEL_ID, + .vendor_id = OUI_WEISS, + .model_id = 0x000004, + .driver_data = (kernel_ulong_t)snd_dice_detect_weiss_formats, + }, { } }; MODULE_DEVICE_TABLE(ieee1394, dice_id_table); base-commit: 9b4469410cf9a0fcbccc92c480fd42f7c815a745 -- 2.41.0

3 26

Codec stops working after sleep and resume
by Jesús Jiménez Sánchez 15 Feb '24

15 Feb '24

I am using the tlv320aic31xx codec in my embedded device and I've noticed that, after forcing the unit into sleep and then, resume, I get a bunch of these errors: ``` tlv320aic31xx-codec 0-0018: ASoC: error at snd_soc_component_update_bits on tlv320aic31xx-codec.0-0018: -108 tlv320aic31xx-codec 0-0018: aic31xx_wait_bits: Failed! 0x25 was 0xcc239ca8 expected 0x0 (-108, 0x20, 0 us) tlv320aic31xx-codec 0-0018: ASoC: POST_PMD: HPL Driver event failed: -1 tlv320aic31xx-codec 0-0018: ASoC: error at snd_soc_component_update_bits on tlv320aic31xx-codec.0-0018: -108 tlv320aic31xx-codec 0-0018: ASoC: POST_PMD: SPL ClassD event failed: -108 tlv320aic31xx-codec 0-0018: ASoC: POST_PMD: SPR ClassD event failed: -108 tlv320aic31xx-codec 0-0018: ASoC: error at snd_soc_component_update_bits on tlv320aic31xx-codec.0-0018: -108 tlv320aic31xx-codec 0-0018: ASoC: error at snd_soc_component_update_bits on tlv320aic31xx-codec.0-0018: -108 tlv320aic31xx-codec 0-0018: ASoC: error at snd_soc_component_update_bits on tlv320aic31xx-codec.0-0018: -108 tlv320aic31xx-codec 0-0018: ASoC: error at snd_soc_component_update_bits on tlv320aic31xx-codec.0-0018: -108 tlv320aic31xx-codec 0-0018: ASoC: error at snd_soc_component_update_bits on tlv320aic31xx-codec.0-0018: -108 tlv320aic31xx-codec 0-0018: ASoC: error at snd_soc_component_update_bits on tlv320aic31xx-codec.0-0018: -108 tlv320aic31xx-codec 0-0018: ASoC: error at snd_soc_component_update_bits on tlv320aic31xx-codec.0-0018: -108 ``` When I look at he output of `dmesg`, I found this: ``` ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1506 at drivers/i2c/i2c-core.h:54 __i2c_transfer+0xac/0xb4 i2c i2c-0: Transfer while suspended Modules linked in: rfcomm stm32_adc stm32_timer_trigger stm32_lptimer_trigger sha256_generic libsha256 sha256_arm snd_soc_simple_card snd_soc_simple_card_utils cfg80211 stm32_crc32 hci_uart btqca stm32_cryp libdes crypto_engine snd_soc_stm32_i2s snd_soc_tlv320aic31xx bluetooth stm32_adc_core snd_soc_core atmel_mxt_ts snd_pcm_dmaengine snd_pcm ecdh_generic snd_timer snd ecc sgm4151x_charger soundcore libaes [last unloaded: wlan] CPU: 0 PID: 1506 Comm: sh Tainted: G O 5.15.67 #1 Hardware name: STM32 (Device Tree Support) [<c010e8cc>] (unwind_backtrace) from [<c010c120>] (show_stack+0x10/0x14) [<c010c120>] (show_stack) from [<c011dc1c>] (__warn+0xec/0x148) [<c011dc1c>] (__warn) from [<c0bed42c>] (warn_slowpath_fmt+0x78/0xac) [<c0bed42c>] (warn_slowpath_fmt) from [<c092ecdc>] (__i2c_transfer+0xac/0xb4) [<c092ecdc>] (__i2c_transfer) from [<c092ed80>] (i2c_transfer+0x9c/0x138) [<c092ed80>] (i2c_transfer) from [<c06f5a40>] (regmap_i2c_read+0x5c/0x98) [<c06f5a40>] (regmap_i2c_read) from [<c06f0e2c>] (_regmap_raw_read+0x10c/0x2a8) [<c06f0e2c>] (_regmap_raw_read) from [<c06f1008>] (_regmap_bus_read+0x40/0x6c) [<c06f1008>] (_regmap_bus_read) from [<c06ef9c4>] (_regmap_read+0x60/0x14c) [<c06ef9c4>] (_regmap_read) from [<c06effdc>] (_regmap_update_bits+0xb4/0xf4) [<c06effdc>] (_regmap_update_bits) from [<c06f00c0>] (_regmap_select_page+0xa4/0x108) [<c06f00c0>] (_regmap_select_page) from [<c06f07a8>] (_regmap_raw_write_impl+0x684/0x968) [<c06f07a8>] (_regmap_raw_write_impl) from [<c06f0b04>] (_regmap_bus_raw_write+0x78/0xa0) [<c06f0b04>] (_regmap_bus_raw_write) from [<c06efe40>] (_regmap_write+0x4c/0x134) [<c06efe40>] (_regmap_write) from [<c06f0010>] (_regmap_update_bits+0xe8/0xf4) [<c06f0010>] (_regmap_update_bits) from [<c06f1820>] (regmap_update_bits_base+0x50/0x74) [<c06f1820>] (regmap_update_bits_base) from [<bf0d0980>] (snd_soc_component_update_bits+0x78/0x124 [snd_soc_core]) [<bf0d0980>] (snd_soc_component_update_bits [snd_soc_core]) from [<bf0daa20>] (dapm_seq_run_coalesced+0x14c/0x1a4 [snd_soc_core]) [<bf0daa20>] (dapm_seq_run_coalesced [snd_soc_core]) from [<bf0dab68>] (dapm_seq_run+0xf0/0x350 [snd_soc_core]) [<bf0dab68>] (dapm_seq_run [snd_soc_core]) from [<bf0db170>] (dapm_power_widgets+0x3a8/0x530 [snd_soc_core]) [<bf0db170>] (dapm_power_widgets [snd_soc_core]) from [<bf0cc214>] (snd_soc_dapm_sync+0x48/0x54 [snd_soc_core]) [<bf0cc214>] (snd_soc_dapm_sync [snd_soc_core]) from [<bf0c652c>] (snd_soc_suspend+0xf0/0x230 [snd_soc_core]) [<bf0c652c>] (snd_soc_suspend [snd_soc_core]) from [<c06df188>] (dpm_run_callback+0x48/0x134) [<c06df188>] (dpm_run_callback) from [<c06df58c>] (__device_suspend+0x11c/0x4c4) [<c06df58c>] (__device_suspend) from [<c06e1c10>] (dpm_suspend+0x148/0x2cc) [<c06e1c10>] (dpm_suspend) from [<c06e20e8>] (dpm_suspend_start+0x64/0x6c) [<c06e20e8>] (dpm_suspend_start) from [<c0159f00>] (suspend_devices_and_enter+0x150/0x2b4) [<c0159f00>] (suspend_devices_and_enter) from [<c0bede38>] (enter_state+0x204/0x250) [<c0bede38>] (enter_state) from [<c015a0a4>] (pm_suspend+0x40/0x98) [<c015a0a4>] (pm_suspend) from [<c0158ae4>] (state_store+0x68/0xc8) [<c0158ae4>] (state_store) from [<c0330a68>] (kernfs_fop_write_iter+0x10c/0x1cc) [<c0330a68>] (kernfs_fop_write_iter) from [<c028ea40>] (vfs_write+0x298/0x45c) [<c028ea40>] (vfs_write) from [<c028ed4c>] (ksys_write+0x60/0xe4) [<c028ed4c>] (ksys_write) from [<c0100060>] (ret_fast_syscall+0x0/0x48) Exception stack(0xcffcbfa8 to 0xcffcbff0) bfa0: 00000004 005ac7d8 00000001 005ac7d8 00000004 00000000 bfc0: 00000004 005ac7d8 00000001 00000004 b6f01680 bee896d8 005a8448 005a8590 bfe0: 005a6dfc bee89690 004fcda4 b6dcb4f8 ---[ end trace 75457fd792755cae ]--- ``` I've been trying for a few days, but I can't find the source of the problem or a way to solve it. Is there anything I might be missing? I assume the problem is that it's trying to write to the registers after the suspend has happened, but I haven't been able to prove that either, and I wouldn't know how to fix that. Could that be what's happening here? Thanks.

1 1