October 2023 - Alsa-devel - mailman.alsa-project.org

hda: how to implement component master_unbind?
by Kai Vehmanen 20 Dec '24

20 Dec '24

Hi Takashi et al, I've been having multiple discussions with our i915 team w.r.t. audio driver behaviour when the aggregate component is unbound, triggered by i915 unbind. This came up again in the recent regression with devres allocations and I now dug into the topic again. In short, I'm puzzled how to really implement this. ALSA (or ASoC) don't really have support for individual components of a card disappearing in a hotplug fashion. At card level, we do have such support (USB, firewire and recent work for PCI hotplug). But not individual components of a card getting unplugged. In current code we have this: static void hdac_component_master_unbind(struct device *dev) { » struct drm_audio_component *acomp = hdac_get_acomp(dev); » if (acomp->audio_ops && acomp->audio_ops->master_unbind) » » acomp->audio_ops->master_unbind(dev, acomp); » module_put(acomp->ops->owner); » component_unbind_all(dev, acomp); » WARN_ON(acomp->ops || acomp->dev); } ... when e.g. i915 driver is unbound (but could be any driver using the component framework, not jus Intel hw), i915 calls component_del() and HDA gets call to the above. After this, acomp ops are null are audio no longer has ability to talk to i915 driver (which makes sense given it's unbound). If audio was runtime suspended, this kind of works (but relies on some good luck). Upon HDA controller resume, we note acomp ops are NULL and HDMI/DP operations (like snd_hdac_display_power()) silently become no-ops. PCM streaming will go to /dev/null, but this is ok'ish since no monitor can be connected anyways. If audio was active, we start to get warnings or worse. Audio expects hw display codec to be powered and programmed, but suddenly it mey lose state. If the audio controller is actually part of the display hardware (e.g. discrete GPUs), then controller registers can stop functioning (they should be still available, but given the main diplay driver is unbound, odds of suprising behaviour are high). So this is less than ideal. I've been looking at options: 1) prevent/block the unbind if audio device is busy The component framework does not allow individual components to return -EBUSY, so there's no way to let others know that unbind is not possible now. This would force anyone testing DRM driver unbind to first unbind the audio driver and stop any active audio use-cases if needed. 2) unbind the ALSA card I've experimented doing a device_unregister() from the above callback, but this has not really worked (onion peeling exercise of new probelms). The code is shared by multiple controllers, so getting a handle to an snd_card object is not straighforward (drvdata is differnet for SOF and snd-hda-intel for instance). But with some new work, maybe we could call snd_card_disconnect() to detach the card and inform user-space. 3) continue as-is and try to fix bugs If audio is active, maybe we could force a acomp->put_power() to ensure a clean unregister of the display part. But this leaves a big chunk of issues especially with HDA controllers that require the display to be powered on, to function. .. Any ideas, and/or has there been prior work? It seems Takashi it's been mostly you who has been active working on the acomp integration recently. I also included Chris, Daniel and Jani who've had patches to hdac_component.c. Br, Kai

3 5

[PATCH v2 0/3] ASoC: mediatek:mt8186: fix both the speaker and hdmi
by Jiaxin Yu 06 Dec '24

06 Dec '24

The speaker and hdmi of mt8186 platform are shared the same port of I2S, when connect the external display, use build-in speakers to play audio, they both playback at the same time. So we want to manage the playback device through DAPM events. Change since v1: Support audio function for it6505 bridge to hdmi-codec Jiaxin Yu (3): ASoC: hdmi-codec: Add event handler for hdmi TX ASoC: mediatek: mt8186: correct the HDMI widgets drm/bridge: it6505: Add audio support drivers/gpu/drm/bridge/ite-it6505.c | 81 +++++++++++++++++-- include/sound/hdmi-codec.h | 6 ++ sound/soc/codecs/hdmi-codec.c | 37 ++++++++- .../mt8186/mt8186-mt6366-da7219-max98357.c | 2 +- .../mt8186/mt8186-mt6366-rt1019-rt5682s.c | 2 +- 5 files changed, 116 insertions(+), 12 deletions(-) -- 2.18.0

3 16

[alsa-devel] Error patching file pcm_native.c
by Delusion's Master 20 Nov '24

20 Nov '24

Hi, first of all I apologize in case you receive multiple copies of this message, but I forgot to specify a subject in the original mail. I have a problem compiling the latest alsa driver snapshots. Specifically, it's a problem when patching pcm_native.c: [..] copying file alsa-kernel/core/info.c patching file info.c copying file alsa-kernel/core/pcm.c patching file pcm.c Hunk #3 succeeded at 739 (offset 2 lines). Hunk #5 succeeded at 954 (offset 2 lines). Hunk #7 succeeded at 1045 (offset 2 lines). copying file alsa-kernel/core/pcm_native.c patching file pcm_native.c Hunk #4 succeeded at 1544 (offset -25 lines). Hunk #5 succeeded at 2827 (offset 12 lines). Hunk #6 succeeded at 2878 (offset 10 lines). Hunk #7 FAILED at 2906. Hunk #8 FAILED at 2922. Hunk #9 succeeded at 2915 (offset -23 lines). Hunk #10 succeeded at 3036 (offset 10 lines). Hunk #11 succeeded at 3027 (offset -23 lines). Hunk #12 succeeded at 3074 (offset 10 lines). Hunk #13 succeeded at 3098 (offset -23 lines). Hunk #14 succeeded at 3143 (offset 10 lines). Hunk #15 succeeded at 3124 (offset -23 lines). Hunk #16 succeeded at 3214 (offset 10 lines). Hunk #17 succeeded at 3208 (offset -23 lines). Hunk #18 succeeded at 3271 (offset 10 lines). Hunk #19 succeeded at 3304 (offset -23 lines). Hunk #20 succeeded at 3386 (offset 10 lines). Hunk #21 succeeded at 3411 (offset -23 lines). Hunk #22 succeeded at 3456 (offset 10 lines). Hunk #23 succeeded at 3450 (offset -23 lines). Hunk #24 succeeded at 3525 (offset 10 lines). Hunk #25 succeeded at 3644 (offset -23 lines). 2 out of 25 hunks FAILED -- saving rejects to file pcm_native.c.rej make[2]: *** [pcm_native.c] Error 1 It's some days I get this, but I waited to report this since I thought it could be a temporary problem. My OS is Fedora 11 x86_64. Previous snapshots didn't give me this problem, but I can't say which one broke the compilation, since I usually try updated snapshots only at kernel updates. I searched for this error and the only relevant report I could find is this one: http://mailman.alsa-project.org/pipermail/alsa-devel/2009-April/016420.html a report from last April. What could the problem be? Thanks _________________________________________________________________ Invite your mail contacts to join your friends list with Windows Live Spaces. It's easy! http://spaces.live.com/spacesapi.aspx?wx_action=create&wx_url=/friends.aspx…

3 10

[alsa-devel] [RFC PATCH 00/10] Add support for DMA and audio codec of F1C100s
by Mesih Kilinc 23 Oct '24

23 Oct '24

This is RFC patchset for Allwinner suniv F1C100s to support DMA and audio codec. Allwinner F1C100s has a audio codec that has necessary digital and analog parts. It has r-l headphone output and microphone, line, r-l FM inputs. ADC can capture any inputs and also output channels via mux. Any input channels or DAC samples can feed output channels. Add support for this audio codec. F1C100s utilizes DMA channels to send and receive ADC-DAC samples. So DMA support needed. Patch 1~5 adds support for DMA. Suniv F1C100s has very similar DMA to sun4i. But there is some dissimilarities also. Suniv features a DMA reset bit in clock control unit. It has smaller number of DMA channels. Several registers has different addresses. It's max burst size is 4 instead of 8. Also DMA endpoint numbers are different. Patch 6 adds DMA max burst option to sun4i-codec. Patch 7~8 Add support for suniv F1C100s audio codec. Patch 9 adds audio codec to suniv-f1c100s.dtsi Patch 10 adds audio codec support to Lichee Pi Nano board. Thanks! Mesih Kilinc (10): dma-engine: sun4i: Add a quirk to support different chips dma-engine: sun4i: Add has_reset option to quirk dt-bindings: dmaengine: Add Allwinner suniv F1C100s DMA dma-engine: sun4i: Add support for Allwinner suniv F1C100s ARM: dts: suniv: f1c100s: Add support for DMA ASoC: sun4i-codec: Add DMA Max Burst field dt-bindigs: sound: Add Allwinner suniv F1C100s Audio Codec ASoC: sun4i-codec: Add support for Allwinner suniv F1C100s ARM: dts: suniv: f1c100s: Add support for Audio Codec ARM: dts: suniv: f1c100s: Activate Audio Codec for Lichee Pi Nano .../devicetree/bindings/dma/sun4i-dma.txt | 4 +- .../devicetree/bindings/sound/sun4i-codec.txt | 5 + arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts | 8 + arch/arm/boot/dts/suniv-f1c100s.dtsi | 25 ++ drivers/dma/Kconfig | 4 +- drivers/dma/sun4i-dma.c | 221 ++++++++++-- sound/soc/sunxi/sun4i-codec.c | 371 ++++++++++++++++++++- 7 files changed, 601 insertions(+), 37 deletions(-) -- 2.7.4

5 18

[alsa-devel] unsupported variant of snd_hda_intel
by Alexandre 04 Jul '24

04 Jul '24

Hello, I have an Acer Aspire 4736G laptop. The soundcard that is shipped in this laptop is intel-hda based as shown (actually it's a realtek): cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0x9b300000 irq 46 Basic sound output is correct but few feature are missing: - internal mic seems to be found but do not works. - sound output stop working when trying to send it using HDMI output - heads do not work when plugged neither when forcing pulseaudio to use it. I have an ubuntu 10.10 which is shipped with alsa 1.0.23. I have googled around and tried loading the snd-hda-intel with several parameters () as found in HD-Audio-Models.txt to no avail. cat /proc/asound/pcm 00-00: ALC888 Analog : ALC888 Analog : playback 1 : capture 1 00-01: ALC888 Digital : ALC888 Digital : playback 1 00-03: NVIDIA HDMI : NVIDIA HDMI : playback 1 Where can I begin to help implement the support for this sound card? I have very skills in developement in general but am ready to try if it is not to hard (I supose I can use previous code for similar models).. I just need a shepherd. Thanks

4 4

[PATCH v4 0/7] Patches to update for rockchip pdm
by Sugar Zhang 23 Apr '24

23 Apr '24

These patches fixup or update for rockchip pdm. Changes in v4: - Acked by Rob Herring Changes in v3: - Fix property 'path-map' suggested by Rob Herring. Changes in v2: - Fix yamllint errors. Sugar Zhang (7): ASoC: rockchip: Add support for rv1126 pdm ASoC: dt-bindings: rockchip: Add binding for rv1126 pdm ASoC: rockchip: pdm: Add support for rk3568 pdm ASoC: dt-bindings: rockchip: Add binding for rk3568 pdm ASoC: rockchip: pdm: Add support for path map ASoC: dt-bindings: rockchip: pdm: Document property 'rockchip,path-map' ASoC: dt-bindings: rockchip: Convert pdm bindings to yaml .../devicetree/bindings/sound/rockchip,pdm.txt | 46 -------- .../devicetree/bindings/sound/rockchip,pdm.yaml | 120 +++++++++++++++++++++ sound/soc/rockchip/rockchip_pdm.c | 112 +++++++++++++++++-- sound/soc/rockchip/rockchip_pdm.h | 6 ++ 4 files changed, 232 insertions(+), 52 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/rockchip,pdm.txt create mode 100644 Documentation/devicetree/bindings/sound/rockchip,pdm.yaml -- 2.7.4

3 9

[PATCH v3] powerpc: macio: Make remove callback of macio driver void returned
by Dawei Li 13 Mar '24

13 Mar '24

Commit fc7a6209d571 ("bus: Make remove callback return void") forces bus_type::remove be void-returned, it doesn't make much sense for any bus based driver implementing remove callbalk to return non-void to its caller. This change is for macio bus based drivers. Signed-off-by: Dawei Li <set_pte_at(a)outlook.com> --- v2 -> v3 - Rebased on latest powerpc/next. - cc' to relevant subsysem lists. v1 -> v2 - Revert unneeded changes. - Rebased on latest powerpc/next. v1 - https://lore.kernel.org/all/TYCP286MB2323FCDC7ECD87F8D97CB74BCA189@TYCP286M… --- arch/powerpc/include/asm/macio.h | 2 +- drivers/ata/pata_macio.c | 4 +--- drivers/macintosh/rack-meter.c | 4 +--- drivers/net/ethernet/apple/bmac.c | 4 +--- drivers/net/ethernet/apple/mace.c | 4 +--- drivers/net/wireless/intersil/orinoco/airport.c | 4 +--- drivers/scsi/mac53c94.c | 5 +---- drivers/scsi/mesh.c | 5 +---- drivers/tty/serial/pmac_zilog.c | 7 ++----- sound/aoa/soundbus/i2sbus/core.c | 4 +--- 10 files changed, 11 insertions(+), 32 deletions(-) diff --git a/arch/powerpc/include/asm/macio.h b/arch/powerpc/include/asm/macio.h index ff5fd82d9ff0..cb9c386dacf8 100644 --- a/arch/powerpc/include/asm/macio.h +++ b/arch/powerpc/include/asm/macio.h @@ -125,7 +125,7 @@ static inline struct pci_dev *macio_get_pci_dev(struct macio_dev *mdev) struct macio_driver { int (*probe)(struct macio_dev* dev, const struct of_device_id *match); - int (*remove)(struct macio_dev* dev); + void (*remove)(struct macio_dev *dev); int (*suspend)(struct macio_dev* dev, pm_message_t state); int (*resume)(struct macio_dev* dev); diff --git a/drivers/ata/pata_macio.c b/drivers/ata/pata_macio.c index 9ccaac9e2bc3..653106716a4b 100644 --- a/drivers/ata/pata_macio.c +++ b/drivers/ata/pata_macio.c @@ -1187,7 +1187,7 @@ static int pata_macio_attach(struct macio_dev *mdev, return rc; } -static int pata_macio_detach(struct macio_dev *mdev) +static void pata_macio_detach(struct macio_dev *mdev) { struct ata_host *host = macio_get_drvdata(mdev); struct pata_macio_priv *priv = host->private_data; @@ -1202,8 +1202,6 @@ static int pata_macio_detach(struct macio_dev *mdev) ata_host_detach(host); unlock_media_bay(priv->mdev->media_bay); - - return 0; } #ifdef CONFIG_PM_SLEEP diff --git a/drivers/macintosh/rack-meter.c b/drivers/macintosh/rack-meter.c index c28893e41a8b..f2f83c4f3af5 100644 --- a/drivers/macintosh/rack-meter.c +++ b/drivers/macintosh/rack-meter.c @@ -523,7 +523,7 @@ static int rackmeter_probe(struct macio_dev* mdev, return rc; } -static int rackmeter_remove(struct macio_dev* mdev) +static void rackmeter_remove(struct macio_dev *mdev) { struct rackmeter *rm = dev_get_drvdata(&mdev->ofdev.dev); @@ -558,8 +558,6 @@ static int rackmeter_remove(struct macio_dev* mdev) /* Get rid of me */ kfree(rm); - - return 0; } static int rackmeter_shutdown(struct macio_dev* mdev) diff --git a/drivers/net/ethernet/apple/bmac.c b/drivers/net/ethernet/apple/bmac.c index 9e653e2925f7..292b1f9cd9e7 100644 --- a/drivers/net/ethernet/apple/bmac.c +++ b/drivers/net/ethernet/apple/bmac.c @@ -1591,7 +1591,7 @@ bmac_proc_info(char *buffer, char **start, off_t offset, int length) } #endif -static int bmac_remove(struct macio_dev *mdev) +static void bmac_remove(struct macio_dev *mdev) { struct net_device *dev = macio_get_drvdata(mdev); struct bmac_data *bp = netdev_priv(dev); @@ -1609,8 +1609,6 @@ static int bmac_remove(struct macio_dev *mdev) macio_release_resources(mdev); free_netdev(dev); - - return 0; } static const struct of_device_id bmac_match[] = diff --git a/drivers/net/ethernet/apple/mace.c b/drivers/net/ethernet/apple/mace.c index fd1b008b7208..e6350971c707 100644 --- a/drivers/net/ethernet/apple/mace.c +++ b/drivers/net/ethernet/apple/mace.c @@ -272,7 +272,7 @@ static int mace_probe(struct macio_dev *mdev, const struct of_device_id *match) return rc; } -static int mace_remove(struct macio_dev *mdev) +static void mace_remove(struct macio_dev *mdev) { struct net_device *dev = macio_get_drvdata(mdev); struct mace_data *mp; @@ -296,8 +296,6 @@ static int mace_remove(struct macio_dev *mdev) free_netdev(dev); macio_release_resources(mdev); - - return 0; } static void dbdma_reset(volatile struct dbdma_regs __iomem *dma) diff --git a/drivers/net/wireless/intersil/orinoco/airport.c b/drivers/net/wireless/intersil/orinoco/airport.c index a890bfa0d5cc..276a06cdd1f5 100644 --- a/drivers/net/wireless/intersil/orinoco/airport.c +++ b/drivers/net/wireless/intersil/orinoco/airport.c @@ -85,7 +85,7 @@ airport_resume(struct macio_dev *mdev) return err; } -static int +static void airport_detach(struct macio_dev *mdev) { struct orinoco_private *priv = dev_get_drvdata(&mdev->ofdev.dev); @@ -111,8 +111,6 @@ airport_detach(struct macio_dev *mdev) macio_set_drvdata(mdev, NULL); free_orinocodev(priv); - - return 0; } static int airport_hard_reset(struct orinoco_private *priv) diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c index f75928f7773e..42648ca9b8ed 100644 --- a/drivers/scsi/mac53c94.c +++ b/drivers/scsi/mac53c94.c @@ -508,7 +508,7 @@ static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *mat return rc; } -static int mac53c94_remove(struct macio_dev *mdev) +static void mac53c94_remove(struct macio_dev *mdev) { struct fsc_state *fp = (struct fsc_state *)macio_get_drvdata(mdev); struct Scsi_Host *host = fp->host; @@ -526,11 +526,8 @@ static int mac53c94_remove(struct macio_dev *mdev) scsi_host_put(host); macio_release_resources(mdev); - - return 0; } - static struct of_device_id mac53c94_match[] = { { diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c index 84b541a57b7b..cd2575b88c85 100644 --- a/drivers/scsi/mesh.c +++ b/drivers/scsi/mesh.c @@ -1986,7 +1986,7 @@ static int mesh_probe(struct macio_dev *mdev, const struct of_device_id *match) return -ENODEV; } -static int mesh_remove(struct macio_dev *mdev) +static void mesh_remove(struct macio_dev *mdev) { struct mesh_state *ms = (struct mesh_state *)macio_get_drvdata(mdev); struct Scsi_Host *mesh_host = ms->host; @@ -2013,11 +2013,8 @@ static int mesh_remove(struct macio_dev *mdev) macio_release_resources(mdev); scsi_host_put(mesh_host); - - return 0; } - static struct of_device_id mesh_match[] = { { diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c index 13668ffdb1e7..d4640479c338 100644 --- a/drivers/tty/serial/pmac_zilog.c +++ b/drivers/tty/serial/pmac_zilog.c @@ -1507,12 +1507,12 @@ static int pmz_attach(struct macio_dev *mdev, const struct of_device_id *match) * That one should not be called, macio isn't really a hotswap device, * we don't expect one of those serial ports to go away... */ -static int pmz_detach(struct macio_dev *mdev) +static void pmz_detach(struct macio_dev *mdev) { struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev); if (!uap) - return -ENODEV; + return; uart_remove_one_port(&pmz_uart_reg, &uap->port); @@ -1523,11 +1523,8 @@ static int pmz_detach(struct macio_dev *mdev) dev_set_drvdata(&mdev->ofdev.dev, NULL); uap->dev = NULL; uap->port.dev = NULL; - - return 0; } - static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state) { struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev); diff --git a/sound/aoa/soundbus/i2sbus/core.c b/sound/aoa/soundbus/i2sbus/core.c index 51ed2f34b276..35f39727994d 100644 --- a/sound/aoa/soundbus/i2sbus/core.c +++ b/sound/aoa/soundbus/i2sbus/core.c @@ -364,15 +364,13 @@ static int i2sbus_probe(struct macio_dev* dev, const struct of_device_id *match) return 0; } -static int i2sbus_remove(struct macio_dev* dev) +static void i2sbus_remove(struct macio_dev *dev) { struct i2sbus_control *control = dev_get_drvdata(&dev->ofdev.dev); struct i2sbus_dev *i2sdev, *tmp; list_for_each_entry_safe(i2sdev, tmp, &control->list, item) soundbus_remove_one(&i2sdev->sound); - - return 0; } #ifdef CONFIG_PM -- 2.25.1

6 6

[PATCH] soundwire: Use snd_soc_substream_to_rtd() to obtain rtd
by Amadeusz Sławiński 03 Mar '24

03 Mar '24

From: Cezary Rojewski <cezary.rojewski(a)intel.com> Utilize the helper function instead of casting from ->private_data directly. Signed-off-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> --- drivers/soundwire/stream.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c index 69719b335bcb..652aae4e221d 100644 --- a/drivers/soundwire/stream.c +++ b/drivers/soundwire/stream.c @@ -1717,7 +1717,7 @@ EXPORT_SYMBOL(sdw_deprepare_stream); static int set_stream(struct snd_pcm_substream *substream, struct sdw_stream_runtime *sdw_stream) { - struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream); struct snd_soc_dai *dai; int ret = 0; int i; @@ -1770,7 +1770,7 @@ EXPORT_SYMBOL(sdw_alloc_stream); int sdw_startup_stream(void *sdw_substream) { struct snd_pcm_substream *substream = sdw_substream; - struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream); struct sdw_stream_runtime *sdw_stream; char *name; int ret; @@ -1814,7 +1814,7 @@ EXPORT_SYMBOL(sdw_startup_stream); void sdw_shutdown_stream(void *sdw_substream) { struct snd_pcm_substream *substream = sdw_substream; - struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream); struct sdw_stream_runtime *sdw_stream; struct snd_soc_dai *dai; -- 2.34.1

2 2

[PATCH] ALSA: dice: add stream format parameters for Weiss devices
by Michele Perrone 29 Feb '24

29 Feb '24

Hard-coded stream format parameters are added for Weiss Engineering FireWire devices. When the device vendor and model match, the parameters are copied into the stream format cache. This allows for setting all supported sampling rates up to 192kHz, and consequently adjusting the number of available I/O channels. Signed-off-by: Rolf Anderegg <rolf.anderegg(a)weiss.ch> Signed-off-by: Michele Perrone <michele.perrone(a)weiss.ch> --- sound/firewire/dice/Makefile | 2 +- sound/firewire/dice/dice-weiss.c | 120 +++++++++++++++++++++++++++++++ sound/firewire/dice/dice.c | 72 +++++++++++++++++++ 3 files changed, 193 insertions(+), 1 deletion(-) create mode 100644 sound/firewire/dice/dice-weiss.c diff --git a/sound/firewire/dice/Makefile b/sound/firewire/dice/Makefile index a5f3fbf28b8c..bac8712f9014 100644 --- a/sound/firewire/dice/Makefile +++ b/sound/firewire/dice/Makefile @@ -2,5 +2,5 @@ snd-dice-objs := dice-transaction.o dice-stream.o dice-proc.o dice-midi.o \ dice-pcm.o dice-hwdep.o dice.o dice-tcelectronic.o \ dice-alesis.o dice-extension.o dice-mytek.o dice-presonus.o \ - dice-harman.o dice-focusrite.o + dice-harman.o dice-focusrite.o dice-weiss.o obj-$(CONFIG_SND_DICE) += snd-dice.o diff --git a/sound/firewire/dice/dice-weiss.c b/sound/firewire/dice/dice-weiss.c new file mode 100644 index 000000000000..ad22bfafd324 --- /dev/null +++ b/sound/firewire/dice/dice-weiss.c @@ -0,0 +1,120 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dice-weiss.c - a part of driver for DICE based devices + * + * Copyright (c) 2023 Rolf Anderegg and Michele Perrone + */ + +#include "dice.h" + +struct dice_weiss_spec { + unsigned int tx_pcm_chs[MAX_STREAMS][SND_DICE_RATE_MODE_COUNT]; + unsigned int rx_pcm_chs[MAX_STREAMS][SND_DICE_RATE_MODE_COUNT]; + bool has_midi; +}; + +/* Weiss DAC202: 192kHz 2-channel DAC */ +static const struct dice_weiss_spec dac202 = { + .tx_pcm_chs = {{2, 2, 2}, {0, 0, 0} }, + .rx_pcm_chs = {{2, 2, 2}, {0, 0, 0} }, + .has_midi = false +}; + +/* Weiss MAN301: 192kHz 2-channel music archive network player */ +static const struct dice_weiss_spec man301 = { + .tx_pcm_chs = {{2, 2, 2}, {0, 0, 0} }, + .rx_pcm_chs = {{2, 2, 2}, {0, 0, 0} }, + .has_midi = false +}; + +/* Weiss INT202: 192kHz unidirectional 2-channel digital Firewire interface */ +static const struct dice_weiss_spec int202 = { + .tx_pcm_chs = {{2, 2, 2}, {0, 0, 0} }, + .rx_pcm_chs = {{0, 0, 0}, {0, 0, 0} }, + .has_midi = false +}; + +/* Weiss INT203: 192kHz bidirectional 2-channel digital Firewire interface */ +static const struct dice_weiss_spec int203 = { + .tx_pcm_chs = {{2, 2, 2}, {0, 0, 0} }, + .rx_pcm_chs = {{2, 2, 2}, {0, 0, 0} }, + .has_midi = false +}; + +/* Weiss ADC2: 192kHz A/D converter with microphone preamps and line inputs */ +static const struct dice_weiss_spec adc2 = { + .tx_pcm_chs = {{2, 2, 2}, {0, 0, 0} }, + .rx_pcm_chs = {{2, 2, 2}, {0, 0, 0} }, + .has_midi = false +}; + +/* Weiss DAC2/Minerva: 192kHz 2-channel DAC */ +static const struct dice_weiss_spec dac2_minerva = { + .tx_pcm_chs = {{2, 2, 2}, {0, 0, 0} }, + .rx_pcm_chs = {{2, 2, 2}, {0, 0, 0} }, + .has_midi = false +}; + +/* Weiss Vesta: 192kHz 2-channel Firewire to AES/EBU interface */ +static const struct dice_weiss_spec vesta = { + .tx_pcm_chs = {{2, 2, 2}, {0, 0, 0} }, + .rx_pcm_chs = {{2, 2, 2}, {0, 0, 0} }, + .has_midi = false +}; + +/* Weiss AFI1: 192kHz 24-channel Firewire to ADAT or AES/EBU interface */ +static const struct dice_weiss_spec afi1 = { + .tx_pcm_chs = {{24, 16, 8}, {0, 0, 0} }, + .rx_pcm_chs = {{24, 16, 8}, {0, 0, 0} }, + .has_midi = false +}; + +int snd_dice_detect_weiss_formats(struct snd_dice *dice) +{ + static const struct { + u32 model_id; + const struct dice_weiss_spec *spec; + } *entry, entries[] = { + {0x000007, &dac202}, + {0x000008, &dac202}, /* Maya edition: same audio I/O as DAC202 */ + {0x000006, &int202}, + {0x00000a, &int203}, + {0x00000b, &man301}, + {0x000001, &adc2}, + {0x000003, &dac2_minerva}, + {0x000002, &vesta}, + {0x000004, &afi1}, + }; + struct fw_csr_iterator it; + int key, val, model_id; + int i; + + model_id = 0; + fw_csr_iterator_init(&it, dice->unit->directory); + while (fw_csr_iterator_next(&it, &key, &val)) { + if (key == CSR_MODEL) { + model_id = val; + break; + } + } + + for (i = 0; i < ARRAY_SIZE(entries); ++i) { + entry = entries + i; + if (entry->model_id == model_id) + break; + } + if (i == ARRAY_SIZE(entries)) + return -ENODEV; + + memcpy(dice->tx_pcm_chs, entry->spec->tx_pcm_chs, + MAX_STREAMS * SND_DICE_RATE_MODE_COUNT * sizeof(unsigned int)); + memcpy(dice->rx_pcm_chs, entry->spec->rx_pcm_chs, + MAX_STREAMS * SND_DICE_RATE_MODE_COUNT * sizeof(unsigned int)); + + if (entry->spec->has_midi) { + dice->tx_midi_ports[0] = 1; + dice->rx_midi_ports[0] = 1; + } + + return 0; +} diff --git a/sound/firewire/dice/dice.c b/sound/firewire/dice/dice.c index 6c93e6e4982c..4bcd026a0b3f 100644 --- a/sound/firewire/dice/dice.c +++ b/sound/firewire/dice/dice.c @@ -396,6 +396,78 @@ static const struct ieee1394_device_id dice_id_table[] = { .match_flags = IEEE1394_MATCH_VERSION, .version = DICE_INTERFACE, }, + /* Weiss DAC202: 192kHz 2-channel DAC */ + { + .match_flags = IEEE1394_MATCH_VENDOR_ID | + IEEE1394_MATCH_MODEL_ID, + .vendor_id = OUI_WEISS, + .model_id = 0x000007, + .driver_data = (kernel_ulong_t)snd_dice_detect_weiss_formats, + }, + /* Weiss DAC202: 192kHz 2-channel DAC (Maya edition) */ + { + .match_flags = IEEE1394_MATCH_VENDOR_ID | + IEEE1394_MATCH_MODEL_ID, + .vendor_id = OUI_WEISS, + .model_id = 0x000008, + .driver_data = (kernel_ulong_t)snd_dice_detect_weiss_formats, + }, + /* Weiss MAN301: 192kHz 2-channel music archive network player */ + { + .match_flags = IEEE1394_MATCH_VENDOR_ID | + IEEE1394_MATCH_MODEL_ID, + .vendor_id = OUI_WEISS, + .model_id = 0x00000b, + .driver_data = (kernel_ulong_t)snd_dice_detect_weiss_formats, + }, + /* Weiss INT202: 192kHz unidirectional 2-channel digital Firewire interface */ + { + .match_flags = IEEE1394_MATCH_VENDOR_ID | + IEEE1394_MATCH_MODEL_ID, + .vendor_id = OUI_WEISS, + .model_id = 0x000006, + .driver_data = (kernel_ulong_t)snd_dice_detect_weiss_formats, + }, + /* Weiss INT203: 192kHz bidirectional 2-channel digital Firewire interface */ + { + .match_flags = IEEE1394_MATCH_VENDOR_ID | + IEEE1394_MATCH_MODEL_ID, + .vendor_id = OUI_WEISS, + .model_id = 0x00000a, + .driver_data = (kernel_ulong_t)snd_dice_detect_weiss_formats, + }, + /* Weiss ADC2: 192kHz A/D converter with microphone preamps and line inputs */ + { + .match_flags = IEEE1394_MATCH_VENDOR_ID | + IEEE1394_MATCH_MODEL_ID, + .vendor_id = OUI_WEISS, + .model_id = 0x000001, + .driver_data = (kernel_ulong_t)snd_dice_detect_weiss_formats, + }, + /* Weiss DAC2/Minerva: 192kHz 2-channel DAC */ + { + .match_flags = IEEE1394_MATCH_VENDOR_ID | + IEEE1394_MATCH_MODEL_ID, + .vendor_id = OUI_WEISS, + .model_id = 0x000003, + .driver_data = (kernel_ulong_t)snd_dice_detect_weiss_formats, + }, + /* Weiss Vesta: 192kHz 2-channel Firewire to AES/EBU interface */ + { + .match_flags = IEEE1394_MATCH_VENDOR_ID | + IEEE1394_MATCH_MODEL_ID, + .vendor_id = OUI_WEISS, + .model_id = 0x000002, + .driver_data = (kernel_ulong_t)snd_dice_detect_weiss_formats, + }, + /* Weiss AFI1: 192kHz 24-channel Firewire to ADAT or AES/EBU interface */ + { + .match_flags = IEEE1394_MATCH_VENDOR_ID | + IEEE1394_MATCH_MODEL_ID, + .vendor_id = OUI_WEISS, + .model_id = 0x000004, + .driver_data = (kernel_ulong_t)snd_dice_detect_weiss_formats, + }, { } }; MODULE_DEVICE_TABLE(ieee1394, dice_id_table); base-commit: 9b4469410cf9a0fcbccc92c480fd42f7c815a745 -- 2.41.0

3 26

Codec stops working after sleep and resume
by Jesús Jiménez Sánchez 15 Feb '24

15 Feb '24

I am using the tlv320aic31xx codec in my embedded device and I've noticed that, after forcing the unit into sleep and then, resume, I get a bunch of these errors: ``` tlv320aic31xx-codec 0-0018: ASoC: error at snd_soc_component_update_bits on tlv320aic31xx-codec.0-0018: -108 tlv320aic31xx-codec 0-0018: aic31xx_wait_bits: Failed! 0x25 was 0xcc239ca8 expected 0x0 (-108, 0x20, 0 us) tlv320aic31xx-codec 0-0018: ASoC: POST_PMD: HPL Driver event failed: -1 tlv320aic31xx-codec 0-0018: ASoC: error at snd_soc_component_update_bits on tlv320aic31xx-codec.0-0018: -108 tlv320aic31xx-codec 0-0018: ASoC: POST_PMD: SPL ClassD event failed: -108 tlv320aic31xx-codec 0-0018: ASoC: POST_PMD: SPR ClassD event failed: -108 tlv320aic31xx-codec 0-0018: ASoC: error at snd_soc_component_update_bits on tlv320aic31xx-codec.0-0018: -108 tlv320aic31xx-codec 0-0018: ASoC: error at snd_soc_component_update_bits on tlv320aic31xx-codec.0-0018: -108 tlv320aic31xx-codec 0-0018: ASoC: error at snd_soc_component_update_bits on tlv320aic31xx-codec.0-0018: -108 tlv320aic31xx-codec 0-0018: ASoC: error at snd_soc_component_update_bits on tlv320aic31xx-codec.0-0018: -108 tlv320aic31xx-codec 0-0018: ASoC: error at snd_soc_component_update_bits on tlv320aic31xx-codec.0-0018: -108 tlv320aic31xx-codec 0-0018: ASoC: error at snd_soc_component_update_bits on tlv320aic31xx-codec.0-0018: -108 tlv320aic31xx-codec 0-0018: ASoC: error at snd_soc_component_update_bits on tlv320aic31xx-codec.0-0018: -108 ``` When I look at he output of `dmesg`, I found this: ``` ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1506 at drivers/i2c/i2c-core.h:54 __i2c_transfer+0xac/0xb4 i2c i2c-0: Transfer while suspended Modules linked in: rfcomm stm32_adc stm32_timer_trigger stm32_lptimer_trigger sha256_generic libsha256 sha256_arm snd_soc_simple_card snd_soc_simple_card_utils cfg80211 stm32_crc32 hci_uart btqca stm32_cryp libdes crypto_engine snd_soc_stm32_i2s snd_soc_tlv320aic31xx bluetooth stm32_adc_core snd_soc_core atmel_mxt_ts snd_pcm_dmaengine snd_pcm ecdh_generic snd_timer snd ecc sgm4151x_charger soundcore libaes [last unloaded: wlan] CPU: 0 PID: 1506 Comm: sh Tainted: G O 5.15.67 #1 Hardware name: STM32 (Device Tree Support) [<c010e8cc>] (unwind_backtrace) from [<c010c120>] (show_stack+0x10/0x14) [<c010c120>] (show_stack) from [<c011dc1c>] (__warn+0xec/0x148) [<c011dc1c>] (__warn) from [<c0bed42c>] (warn_slowpath_fmt+0x78/0xac) [<c0bed42c>] (warn_slowpath_fmt) from [<c092ecdc>] (__i2c_transfer+0xac/0xb4) [<c092ecdc>] (__i2c_transfer) from [<c092ed80>] (i2c_transfer+0x9c/0x138) [<c092ed80>] (i2c_transfer) from [<c06f5a40>] (regmap_i2c_read+0x5c/0x98) [<c06f5a40>] (regmap_i2c_read) from [<c06f0e2c>] (_regmap_raw_read+0x10c/0x2a8) [<c06f0e2c>] (_regmap_raw_read) from [<c06f1008>] (_regmap_bus_read+0x40/0x6c) [<c06f1008>] (_regmap_bus_read) from [<c06ef9c4>] (_regmap_read+0x60/0x14c) [<c06ef9c4>] (_regmap_read) from [<c06effdc>] (_regmap_update_bits+0xb4/0xf4) [<c06effdc>] (_regmap_update_bits) from [<c06f00c0>] (_regmap_select_page+0xa4/0x108) [<c06f00c0>] (_regmap_select_page) from [<c06f07a8>] (_regmap_raw_write_impl+0x684/0x968) [<c06f07a8>] (_regmap_raw_write_impl) from [<c06f0b04>] (_regmap_bus_raw_write+0x78/0xa0) [<c06f0b04>] (_regmap_bus_raw_write) from [<c06efe40>] (_regmap_write+0x4c/0x134) [<c06efe40>] (_regmap_write) from [<c06f0010>] (_regmap_update_bits+0xe8/0xf4) [<c06f0010>] (_regmap_update_bits) from [<c06f1820>] (regmap_update_bits_base+0x50/0x74) [<c06f1820>] (regmap_update_bits_base) from [<bf0d0980>] (snd_soc_component_update_bits+0x78/0x124 [snd_soc_core]) [<bf0d0980>] (snd_soc_component_update_bits [snd_soc_core]) from [<bf0daa20>] (dapm_seq_run_coalesced+0x14c/0x1a4 [snd_soc_core]) [<bf0daa20>] (dapm_seq_run_coalesced [snd_soc_core]) from [<bf0dab68>] (dapm_seq_run+0xf0/0x350 [snd_soc_core]) [<bf0dab68>] (dapm_seq_run [snd_soc_core]) from [<bf0db170>] (dapm_power_widgets+0x3a8/0x530 [snd_soc_core]) [<bf0db170>] (dapm_power_widgets [snd_soc_core]) from [<bf0cc214>] (snd_soc_dapm_sync+0x48/0x54 [snd_soc_core]) [<bf0cc214>] (snd_soc_dapm_sync [snd_soc_core]) from [<bf0c652c>] (snd_soc_suspend+0xf0/0x230 [snd_soc_core]) [<bf0c652c>] (snd_soc_suspend [snd_soc_core]) from [<c06df188>] (dpm_run_callback+0x48/0x134) [<c06df188>] (dpm_run_callback) from [<c06df58c>] (__device_suspend+0x11c/0x4c4) [<c06df58c>] (__device_suspend) from [<c06e1c10>] (dpm_suspend+0x148/0x2cc) [<c06e1c10>] (dpm_suspend) from [<c06e20e8>] (dpm_suspend_start+0x64/0x6c) [<c06e20e8>] (dpm_suspend_start) from [<c0159f00>] (suspend_devices_and_enter+0x150/0x2b4) [<c0159f00>] (suspend_devices_and_enter) from [<c0bede38>] (enter_state+0x204/0x250) [<c0bede38>] (enter_state) from [<c015a0a4>] (pm_suspend+0x40/0x98) [<c015a0a4>] (pm_suspend) from [<c0158ae4>] (state_store+0x68/0xc8) [<c0158ae4>] (state_store) from [<c0330a68>] (kernfs_fop_write_iter+0x10c/0x1cc) [<c0330a68>] (kernfs_fop_write_iter) from [<c028ea40>] (vfs_write+0x298/0x45c) [<c028ea40>] (vfs_write) from [<c028ed4c>] (ksys_write+0x60/0xe4) [<c028ed4c>] (ksys_write) from [<c0100060>] (ret_fast_syscall+0x0/0x48) Exception stack(0xcffcbfa8 to 0xcffcbff0) bfa0: 00000004 005ac7d8 00000001 005ac7d8 00000004 00000000 bfc0: 00000004 005ac7d8 00000001 00000004 b6f01680 bee896d8 005a8448 005a8590 bfe0: 005a6dfc bee89690 004fcda4 b6dcb4f8 ---[ end trace 75457fd792755cae ]--- ``` I've been trying for a few days, but I can't find the source of the problem or a way to solve it. Is there anything I might be missing? I assume the problem is that it's trying to write to the registers after the suspend has happened, but I haven't been able to prove that either, and I wouldn't know how to fix that. Could that be what's happening here? Thanks.

1 1