January 2023 - Alsa-devel - mailman.alsa-project.org

[PATCH] ASoC: fsl_micfil: Correct the number of steps on SX controls
by Chancel Liu 06 Jan '23

06 Jan '23

The parameter "max" of SOC_SINGLE_SX_TLV() means the number of steps rather than maximum value. This patch corrects the minimum value to -8 and the number of steps to 15. Signed-off-by: Chancel Liu <chancel.liu(a)nxp.com> --- sound/soc/fsl/fsl_micfil.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/sound/soc/fsl/fsl_micfil.c b/sound/soc/fsl/fsl_micfil.c index d7e6fc996166..d4d3bc7ca87c 100644 --- a/sound/soc/fsl/fsl_micfil.c +++ b/sound/soc/fsl/fsl_micfil.c @@ -325,21 +325,21 @@ static int hwvad_detected(struct snd_kcontrol *kcontrol, static const struct snd_kcontrol_new fsl_micfil_snd_controls[] = { SOC_SINGLE_SX_TLV("CH0 Volume", REG_MICFIL_OUT_CTRL, - MICFIL_OUTGAIN_CHX_SHIFT(0), 0xF, 0x7, gain_tlv), + MICFIL_OUTGAIN_CHX_SHIFT(0), 0x8, 0xF, gain_tlv), SOC_SINGLE_SX_TLV("CH1 Volume", REG_MICFIL_OUT_CTRL, - MICFIL_OUTGAIN_CHX_SHIFT(1), 0xF, 0x7, gain_tlv), + MICFIL_OUTGAIN_CHX_SHIFT(1), 0x8, 0xF, gain_tlv), SOC_SINGLE_SX_TLV("CH2 Volume", REG_MICFIL_OUT_CTRL, - MICFIL_OUTGAIN_CHX_SHIFT(2), 0xF, 0x7, gain_tlv), + MICFIL_OUTGAIN_CHX_SHIFT(2), 0x8, 0xF, gain_tlv), SOC_SINGLE_SX_TLV("CH3 Volume", REG_MICFIL_OUT_CTRL, - MICFIL_OUTGAIN_CHX_SHIFT(3), 0xF, 0x7, gain_tlv), + MICFIL_OUTGAIN_CHX_SHIFT(3), 0x8, 0xF, gain_tlv), SOC_SINGLE_SX_TLV("CH4 Volume", REG_MICFIL_OUT_CTRL, - MICFIL_OUTGAIN_CHX_SHIFT(4), 0xF, 0x7, gain_tlv), + MICFIL_OUTGAIN_CHX_SHIFT(4), 0x8, 0xF, gain_tlv), SOC_SINGLE_SX_TLV("CH5 Volume", REG_MICFIL_OUT_CTRL, - MICFIL_OUTGAIN_CHX_SHIFT(5), 0xF, 0x7, gain_tlv), + MICFIL_OUTGAIN_CHX_SHIFT(5), 0x8, 0xF, gain_tlv), SOC_SINGLE_SX_TLV("CH6 Volume", REG_MICFIL_OUT_CTRL, - MICFIL_OUTGAIN_CHX_SHIFT(6), 0xF, 0x7, gain_tlv), + MICFIL_OUTGAIN_CHX_SHIFT(6), 0x8, 0xF, gain_tlv), SOC_SINGLE_SX_TLV("CH7 Volume", REG_MICFIL_OUT_CTRL, - MICFIL_OUTGAIN_CHX_SHIFT(7), 0xF, 0x7, gain_tlv), + MICFIL_OUTGAIN_CHX_SHIFT(7), 0x8, 0xF, gain_tlv), SOC_ENUM_EXT("MICFIL Quality Select", fsl_micfil_quality_enum, micfil_quality_get, micfil_quality_set), -- 2.25.1

3 2

[PATCH v5 00/13] ASoC: mediatek: Add support for MT8188 SoC
by Trevor Wu 06 Jan '23

06 Jan '23

This series of patches adds support for Mediatek AFE of MT8188 SoC. Patches are based on broonie tree "for-next" branch. Changes since v4: - refine etdm dai driver based on reviewer's suggestions - refine dt-binding files based on reviewer's suggestions Changes since v3: - replace apll_ck with apll to sync with the relationship in CCF - add mtk-soundcard-driver.c to support codec parsing - drop mclk-always-on-rates support in mt8188-dai-etdm.c - refine dt-binding files based on reviewer's suggestions Changes since v2: - drop CLK_IGNORE_UNUSED flag - include bitfield.h to reslove the issue reported by kernel test robot - rename mt8188-afe-pcm.yaml to mt8188-afe.yaml - refine dt-binding files based on reviewer's suggestions Changes since v1: - remove bus protection functions in case of unmerged dependency problem - replace some bit operation macro with FIELD_PREP - simplify register control by regmap_set_bits and regmap_clear_bits - fix dt-binding errors - rename compatible string for recognition Trevor Wu (13): ASoC: mediatek: common: add SMC ops and SMC CMD ASoC: mediatek: mt8188: add common header ASoC: mediatek: mt8188: support audsys clock ASoC: mediatek: mt8188: support adda in platform driver ASoC: mediatek: mt8188: support etdm in platform driver ASoC: mediatek: mt8188: support pcmif in platform driver ASoC: mediatek: mt8188: support audio clock control ASoC: mediatek: mt8188: add platform driver ASoC: mediatek: mt8188: add control for timing select ASoC: dt-bindings: mediatek,mt8188-afe: add audio afe document ASoC: mediatek: common: add soundcard driver common code ASoC: mediatek: mt8188: add machine driver with mt6359 ASoC: dt-bindings: mediatek,mt8188-mt6359: add mt8188-mt6359 document .../bindings/sound/mediatek,mt8188-afe.yaml | 208 + .../sound/mediatek,mt8188-mt6359.yaml | 97 + sound/soc/mediatek/Kconfig | 23 + sound/soc/mediatek/Makefile | 1 + sound/soc/mediatek/common/Makefile | 2 +- sound/soc/mediatek/common/mtk-base-afe.h | 19 + .../mediatek/common/mtk-soundcard-driver.c | 79 + .../mediatek/common/mtk-soundcard-driver.h | 14 + sound/soc/mediatek/mt8188/Makefile | 15 + sound/soc/mediatek/mt8188/mt8188-afe-clk.c | 658 ++++ sound/soc/mediatek/mt8188/mt8188-afe-clk.h | 115 + sound/soc/mediatek/mt8188/mt8188-afe-common.h | 151 + sound/soc/mediatek/mt8188/mt8188-afe-pcm.c | 3359 +++++++++++++++++ sound/soc/mediatek/mt8188/mt8188-audsys-clk.c | 205 + sound/soc/mediatek/mt8188/mt8188-audsys-clk.h | 15 + .../soc/mediatek/mt8188/mt8188-audsys-clkid.h | 83 + sound/soc/mediatek/mt8188/mt8188-dai-adda.c | 632 ++++ sound/soc/mediatek/mt8188/mt8188-dai-etdm.c | 2588 +++++++++++++ sound/soc/mediatek/mt8188/mt8188-dai-pcm.c | 367 ++ sound/soc/mediatek/mt8188/mt8188-mt6359.c | 785 ++++ sound/soc/mediatek/mt8188/mt8188-reg.h | 3180 ++++++++++++++++ 21 files changed, 12595 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml create mode 100644 Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml create mode 100644 sound/soc/mediatek/common/mtk-soundcard-driver.c create mode 100644 sound/soc/mediatek/common/mtk-soundcard-driver.h create mode 100644 sound/soc/mediatek/mt8188/Makefile create mode 100644 sound/soc/mediatek/mt8188/mt8188-afe-clk.c create mode 100644 sound/soc/mediatek/mt8188/mt8188-afe-clk.h create mode 100644 sound/soc/mediatek/mt8188/mt8188-afe-common.h create mode 100644 sound/soc/mediatek/mt8188/mt8188-afe-pcm.c create mode 100644 sound/soc/mediatek/mt8188/mt8188-audsys-clk.c create mode 100644 sound/soc/mediatek/mt8188/mt8188-audsys-clk.h create mode 100644 sound/soc/mediatek/mt8188/mt8188-audsys-clkid.h create mode 100644 sound/soc/mediatek/mt8188/mt8188-dai-adda.c create mode 100644 sound/soc/mediatek/mt8188/mt8188-dai-etdm.c create mode 100644 sound/soc/mediatek/mt8188/mt8188-dai-pcm.c create mode 100644 sound/soc/mediatek/mt8188/mt8188-mt6359.c create mode 100644 sound/soc/mediatek/mt8188/mt8188-reg.h -- 2.18.0

2 5

[PATCH 0/3] ASoC: Add a driver for the Iron Device SMA1303 Amp
by Kiseok Jo 06 Jan '23

06 Jan '23

This adds basic audio support for the Iron Device SMA1303 amplifier. Kiseok Jo (3): ASoC: sma1303: Add driver for Iron Device SMA1303 Amp ASoC: dt-bindings: sma1303: Iron Device SMA1303 Amp ASOC: sma1303: change the overall contents .../bindings/sound/irondevice,sma1303.yaml | 40 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + scripts/kconfig/mconf-cfg | 2 + sound/soc/codecs/Kconfig | 7 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/sma1303.c | 1720 +++++++++++++++++ sound/soc/codecs/sma1303.h | 614 ++++++ 7 files changed, 2387 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/irondevice,sma1303.yaml create mode 100644 scripts/kconfig/mconf-cfg create mode 100644 sound/soc/codecs/sma1303.c create mode 100644 sound/soc/codecs/sma1303.h -- 2.30.2

4 9

[PATCH V8 0/5] ASoC: codecs: Add Awinic AW883XX audio amplifier driver
by wangweidong.a＠awinic.com 06 Jan '23

06 Jan '23

From: Weidong Wang <wangweidong.a(a)awinic.com> The Awinic AW883XX is an I2S/TDM input, high efficiency digital Smart K audio amplifier with an integrated 10.25V smart boost convert Add a DT schema for describing Awinic AW883xx audio amplifiers. They are controlled using I2C v7 -> v8: Delete retry for double loops Enable PA Delete useless initialization and use reverse x-mas tree style Add Spaces in comments Modify aw883xx_switch_set function Delete our own workqueue, use a default one Change variable name Modifying function name Use dev_ replace pr_ function Use define replace number Modify the compatible of the awinic,aw883xx.yaml file Weidong Wang (5): ASoC: codecs: Add i2c and codec registration for aw883xx and their associated operation functions ASoC: codecs: Aw883xx function for ACF file parse and check ASoC: codecs: Aw883xx common function for ALSA Audio Driver ASoC: codecs: Aw883xx chip register file, data type file and Kconfig Makefile ASoC: dt-bindings: Add schema for "awinic,aw883xx" .../bindings/sound/awinic,aw883xx.yaml | 49 + sound/soc/codecs/Kconfig | 10 + sound/soc/codecs/Makefile | 6 + sound/soc/codecs/aw883xx/aw883xx.c | 667 ++++++ sound/soc/codecs/aw883xx/aw883xx.h | 59 + sound/soc/codecs/aw883xx/aw883xx_bin_parse.c | 1067 ++++++++++ sound/soc/codecs/aw883xx/aw883xx_bin_parse.h | 92 + sound/soc/codecs/aw883xx/aw883xx_data_type.h | 143 ++ sound/soc/codecs/aw883xx/aw883xx_device.c | 1790 +++++++++++++++++ sound/soc/codecs/aw883xx/aw883xx_device.h | 198 ++ .../soc/codecs/aw883xx/aw883xx_pid_2049_reg.h | 384 ++++ 11 files changed, 4465 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/awinic,aw883xx.yaml create mode 100644 sound/soc/codecs/aw883xx/aw883xx.c create mode 100644 sound/soc/codecs/aw883xx/aw883xx.h create mode 100644 sound/soc/codecs/aw883xx/aw883xx_bin_parse.c create mode 100644 sound/soc/codecs/aw883xx/aw883xx_bin_parse.h create mode 100644 sound/soc/codecs/aw883xx/aw883xx_data_type.h create mode 100644 sound/soc/codecs/aw883xx/aw883xx_device.c create mode 100644 sound/soc/codecs/aw883xx/aw883xx_device.h create mode 100644 sound/soc/codecs/aw883xx/aw883xx_pid_2049_reg.h base-commit: bff687b3dad6e0e56b27f4d3ed8a9695f35c7b1a -- 2.38.1

8 14

Re: [PATCH] ALSA: hda: Skip creating captures in SOF context
by Kai-Heng Feng 06 Jan '23

06 Jan '23

On Mon, Aug 15, 2022 at 3:55 PM Kai-Heng Feng <kai.heng.feng(a)canonical.com> wrote: > > On Wed, Jul 20, 2022 at 9:31 PM Pierre-Louis Bossart > <pierre-louis.bossart(a)linux.intel.com> wrote: > > > > > > > > On 7/20/22 02:52, Jaroslav Kysela wrote: > > > Dne 20. 07. 22 v 3:45 Kai-Heng Feng napsal(a): > > >> On Tue, Jul 19, 2022 at 11:41 PM Jaroslav Kysela <perex(a)perex.cz> wrote: > > >>> > > >>> Dne 19. 07. 22 v 16:47 Kai-Heng Feng napsal(a): > > >>>> On HP laptops that use SOF driver for DMIC, the micmute LED doesn't > > >>>> light up when mic is muted after commit 9b014266ef8a ("ASoC: SOF: > > >>>> topology: use new sound control LED layer"). > > >>>> > > >>>> The micmute LED itself is still working via sysfs, but it doesn't follow > > >>>> mute anymore. That's because unlike vendors like Dell and Lenovo, HP > > >>>> laptops use HDA codec to control mute LEDs instead of ACPI. So on HP > > >>>> laptops, both SOF and HDA create captures with > > >>>> SNDRV_CTL_ELEM_ACCESS_MIC_LED access, snd_ctl_led_set_state() considers > > >>>> there are two different kcontrols and one of them is not muted. > > >>> > > >>> It does not mean that it's a wrong behavior. When both controls are muted, the > > >>> LED should be turned on. It just requires that all inputs are off (and it may > > >>> be the default - probably we can set in UCM or so). If you turn the "Capture > > >>> Switch" off in amixer / alsamixer, do things work as expected ? > > >> > > >> Yes. When all captures are muted the micmute LED is on. > > >> > > >>> > > >>>> So skip creating captures for HDA when it's called from SOF, the > > >>>> captures are already handled by SOF. > > >>> > > >>> The capture controls are for other inputs like external analog microphone. If > > >>> it is required to suppress the MIC LED for some hardware, just skip the > > >>> "spec->mic_mute_led = 1" assignment in hda_generic.c . Also, the check > > >>> "codec->core.type != HDA_DEV_ASOC" is not sufficient, because you don't know, > > >>> if the topology really sets the MIC LED flag. > > >> > > >> AFAIK the external analog microphone on DMIC laptop is driven by SOF driver too. > > >> If those capture controls are indeed needed for external analog mics, > > >> use UCM to mute them by default won't work either. > > > > > > Could you describe this ? I though that only DMIC is handled by SOF when HDA > > > codec is in the system. There is a separate analog codec for external analog > > > microphone or the HDA codec is somehow connected to SOF/DSP ? If so, how ? > > > > The HDA codec is connected in the same way in all cases, there's no > > hardware/electrical/routing difference. > > > > When used, the SOF driver will handle ALL links, be they DMIC or > > HDAudio. The difference for HDaudio is that instead of a single DMA > > transfer (DDR->FIFO), we have a first 'Host' DMA into the DSP SRAM, some > > processing and a second 'Link' DMA from DSP SRAM to the HDaudio FIFO > > (reversed flow for capture). > > So is this approach sufficient for this issue? Or should I explore > other possibilities? A gentle ping... > > Kai-Heng > > >

2 2

[PATCH] ASoC: amd: Return ENODEV if acp63 is not found.
by Tom Rix 05 Jan '23

05 Jan '23

The clang build fails with sound/soc/amd/ps/pci-ps.c:218:2: error: variable 'ret' is used uninitialized whenever switch default is taken [-Werror,-Wsometimes-uninitialized] default: ^~~~~~~ When no device is found -ENODEV should be returned. A switch with a single case is overkill, change to if-else. Fixes: 1d325cdaf7a2 ("ASoC: amd: ps: refactor platform device creation logic") Signed-off-by: Tom Rix <trix(a)redhat.com> --- sound/soc/amd/ps/pci-ps.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/sound/soc/amd/ps/pci-ps.c b/sound/soc/amd/ps/pci-ps.c index 401cfd0036be..cba8800ab4ea 100644 --- a/sound/soc/amd/ps/pci-ps.c +++ b/sound/soc/amd/ps/pci-ps.c @@ -205,8 +205,7 @@ static int create_acp63_platform_devs(struct pci_dev *pci, struct acp63_dev_data memset(&pdevinfo, 0, sizeof(pdevinfo)); } - switch (adata->pdev_mask) { - case ACP63_PDM_DEV_MASK: + if (adata->pdev_mask == ACP63_PDM_DEV_MASK) { adata->pdm_dev_index = 0; acp63_fill_platform_dev_info(&pdevinfo[0], parent, NULL, "acp_ps_pdm_dma", 0, adata->res, 1, NULL, 0); @@ -214,8 +213,8 @@ static int create_acp63_platform_devs(struct pci_dev *pci, struct acp63_dev_data 0, NULL, 0, NULL, 0); acp63_fill_platform_dev_info(&pdevinfo[2], parent, NULL, "acp_ps_mach", 0, NULL, 0, NULL, 0); - break; - default: + } else { + ret = -ENODEV; dev_dbg(&pci->dev, "No PDM devices found\n"); goto de_init; } -- 2.27.0

2 2

[PATCH 14/27] ASoC: PXA: make SND_PXA2XX_SOC_AC97 user-selectable
by Arnd Bergmann 05 Jan '23

05 Jan '23

From: Arnd Bergmann <arnd(a)arndb.de> When building a PXA kernel without legacy board file support, the AC97 code is not built, so none of the AC97 drivers can be used. Add a Kconfig prompt to let users turn it on, and have it enabled by default. Cc: Robert Jarzmik <robert.jarzmik(a)free.fr> Cc: Liam Girdwood <lgirdwood(a)gmail.com> Cc: Mark Brown <broonie(a)kernel.org> Cc: Jaroslav Kysela <perex(a)perex.cz> Cc: Takashi Iwai <tiwai(a)suse.com> Cc: alsa-devel(a)alsa-project.org Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> --- sound/soc/pxa/Kconfig | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index a045693d5bc2..2036d368c08d 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -16,7 +16,10 @@ config SND_PXA2XX_AC97 tristate config SND_PXA2XX_SOC_AC97 - tristate + tristate "SoC AC97 support for PXA2xx" + depends on SND_PXA2XX_SOC + depends on AC97_BUS=n + default y select AC97_BUS_NEW select SND_PXA2XX_LIB select SND_PXA2XX_LIB_AC97 -- 2.39.0

1 0

[PATCH 1/2] ALSA: hda: cs35l41: Don't return -EINVAL from system suspend/resume
by Takashi Iwai 05 Jan '23

05 Jan '23

The recent commit to support the system suspend for CS35L41 caused a regression on the models with CS35L41_EXT_BOOST_NO_VSPK_SWITC boost type, as the suspend/resume callbacks just return -EINVAL. This is eventually handled as a fatal error and blocks the whole system suspend/resume. For avoiding the problem, this patch corrects the return code from cs35l41_system_suspend() and _resume() to 0, and replace dev_err() with dev_err_once() for stop spamming too much. Fixes: 88672826e2a4 ("ALSA: hda: cs35l41: Support System Suspend") Cc: <stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/4262e3c4-6169-bbd2-e918-16b06f6994bc@protonmail.c… Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/pci/hda/cs35l41_hda.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/pci/hda/cs35l41_hda.c b/sound/pci/hda/cs35l41_hda.c index 91842c0c8c74..0a5cee730268 100644 --- a/sound/pci/hda/cs35l41_hda.c +++ b/sound/pci/hda/cs35l41_hda.c @@ -598,8 +598,8 @@ static int cs35l41_system_suspend(struct device *dev) dev_dbg(cs35l41->dev, "System Suspend\n"); if (cs35l41->hw_cfg.bst_type == CS35L41_EXT_BOOST_NO_VSPK_SWITCH) { - dev_err(cs35l41->dev, "System Suspend not supported\n"); - return -EINVAL; + dev_err_once(cs35l41->dev, "System Suspend not supported\n"); + return 0; /* don't block the whole system suspend */ } ret = pm_runtime_force_suspend(dev); @@ -624,8 +624,8 @@ static int cs35l41_system_resume(struct device *dev) dev_dbg(cs35l41->dev, "System Resume\n"); if (cs35l41->hw_cfg.bst_type == CS35L41_EXT_BOOST_NO_VSPK_SWITCH) { - dev_err(cs35l41->dev, "System Resume not supported\n"); - return -EINVAL; + dev_err_once(cs35l41->dev, "System Resume not supported\n"); + return 0; /* don't block the whole system resume */ } if (cs35l41->reset_gpio) { -- 2.35.3

2 2

[PATCH] sound: hda: increase timeouts to stop crash on resume with ALC3204 and others
by Ben Carter 05 Jan '23

05 Jan '23

Upon waking after system suspend, ALSA often crashed with: snd_hda_intel 0000:00:1f.3: CORB reset timeout#2, CORBRP = 65535 snd_hda_codec_hdmi hdaudioC1D2: Unable to sync register 0x2f8100. -5 snd_hda_codec_realtek hdaudioC1D0: Unable to sync register 0x2b8000. -5 A temporary fix was established by reloading snd_hda_intel, but increasing the rather strict timeout of 1ms to 100ms has remedied the issue on my device. Although this is a much larger delay, most hardware took less than 1ms anyway and it's preferable to the whole audio system crashing. Signed-off-by: Ben Carter <craterrender(a)gmail.com> --- sound/hda/hdac_controller.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/hda/hdac_controller.c b/sound/hda/hdac_controller.c index 3c7af6558249..1ab573248452 100644 --- a/sound/hda/hdac_controller.c +++ b/sound/hda/hdac_controller.c @@ -16,7 +16,7 @@ static void azx_clear_corbrp(struct hdac_bus *bus) { int timeout; - for (timeout = 1000; timeout > 0; timeout--) { + for (timeout = 100000; timeout > 0; timeout--) { if (snd_hdac_chip_readw(bus, CORBRP) & AZX_CORBRP_RST) break; udelay(1); @@ -26,7 +26,7 @@ static void azx_clear_corbrp(struct hdac_bus *bus) snd_hdac_chip_readw(bus, CORBRP)); snd_hdac_chip_writew(bus, CORBRP, 0); - for (timeout = 1000; timeout > 0; timeout--) { + for (timeout = 100000; timeout > 0; timeout--) { if (snd_hdac_chip_readw(bus, CORBRP) == 0) break; udelay(1); -- 2.39.0

1 0

[PATCH] ALSA: hda/realtek: fix mute/micmute LEDs don't work for a HP platform
by Jeremy Szu 05 Jan '23

05 Jan '23

There is a HP platform uses ALC236 codec which using GPIO2 to control mute LED and GPIO1 to control micmute LED. Thus, add a quirk to make them work. Signed-off-by: Jeremy Szu <jeremy.szu(a)canonical.com> --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index eda4914b8aeb..8362eb4642d8 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9409,6 +9409,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x8ad2, "HP EliteBook 860 16 inch G9 Notebook PC", ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8b5d, "HP", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF), SND_PCI_QUIRK(0x103c, 0x8b5e, "HP", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF), + SND_PCI_QUIRK(0x103c, 0x8bf0, "HP", ALC236_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x1043, 0x103e, "ASUS X540SA", ALC256_FIXUP_ASUS_MIC), SND_PCI_QUIRK(0x1043, 0x103f, "ASUS TX300", ALC282_FIXUP_ASUS_TX300), SND_PCI_QUIRK(0x1043, 0x106d, "Asus K53BE", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), -- 2.38.1

2 2