January 2023 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] echo-cancellation plugin advice?
by Max Klein 27 Oct '23

27 Oct '23

> Well, asym wouldn't be the answer. Basically you'll need to open two > slave PCMs in one plugin. So, it's no simple filter-type plugin. > It's doable, but not easy as it sounds, I guess. Takashi, can you please further explain why asym is not the solution and what you see as a problem? I am also trying to figure out if it would be possible to create such a plugin for ALSA? I am still searching for some good starting points on how to write an ALSA plugin... Jean-Marc Valin (http://lists.linuxaudio.org/pipermail/linux-audio-dev/2005-June/012454.html) already released his work as part of speex but as far I know there is no plugin that has been made out of it? Thanks for any hint! -- NEU: FreePhone 3-fach-Flat mit kostenlosem Smartphone! Jetzt informieren: http://mobile.1und1.de/?ac=OM.PW.PW003K20328T7073a

3 2

[PATCH] ASoC: fsl_sai: Enable MCTL_MCLK_EN bit for master mode
by Shengjiu Wang 07 Jul '23

07 Jul '23

On i.MX8MM, the MCTL_MCLK_EN bit it is not only the gate for MCLK output to PAD, but also the gate bit between root clock and SAI module, So it is need to be enabled for master mode, otherwise there is no bclk generated. Signed-off-by: Shengjiu Wang <shengjiu.wang(a)nxp.com> --- sound/soc/fsl/fsl_sai.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index fa950dde5310..dae16a14f177 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -437,6 +437,12 @@ static int fsl_sai_set_bclk(struct snd_soc_dai *dai, bool tx, u32 freq) FSL_SAI_CR2_DIV_MASK | FSL_SAI_CR2_BYP, savediv / 2 - 1); + if (sai->soc_data->max_register >= FSL_SAI_MCTL) { + /* SAI is in master mode at this point, so enable MCLK */ + regmap_update_bits(sai->regmap, FSL_SAI_MCTL, + FSL_SAI_MCTL_MCLK_EN, FSL_SAI_MCTL_MCLK_EN); + } + return 0; } -- 2.17.1

5 4

[PATCH v3 0/6] Introduce STM32 system bus
by Gatien Chevallier 05 Jul '23

05 Jul '23

Document STM32 System Bus. This bus is intended to control firewall access for the peripherals connected to it. For every peripheral, the bus checks the firewall registers to see if the peripheral is configured as non-secure. If the peripheral is configured as secure, the node is marked populated, so the device won't be probed. This is useful as a firewall configuration sanity check and avoid platform crashes in case peripherals are incorrectly configured. The STM32 System Bus implements the feature-domain-controller bindings. It is used by peripherals to reference a domain controller, in this case the firewall feature domain. The bus uses the ID referenced by the feature-domains property to know where to look in the firewall to get the security configuration for the peripheral. This allows a device tree description rather than a hardcoded peripheral table in the bus driver. On STM32MP13/15 platforms, the firewall bus is represented by the ETZPC node, which is responsible for the securing / MCU isolating the capable peripherals. STM32MP13/15 device trees are updated in this series to implement the bus. All peripherals that are securable or MCU isolation capable by the ETZPC are connected to the bus. Changes in V2: - Corrected YAMLS errors highlighted by Rob's robot - Re-ordered Signed-off-by tags in two patches Changes in V3: - Document feature-domains property in YAML documentation for concerned periperals under the System Bus - Fix STM32 System Bus YAML documentation - Remove STM32 System bus bindings that were currently used as helpers for device tree - Correct few errors in driver - Add missing peripherals under the System Bus that were in SoC variation device tree files - Fix node names Gatien Chevallier (5): dt-bindings: treewide: add feature-domains description in binding files dt-bindings: bus: add STM32 System Bus bus: stm32_sys_bus: add support for STM32MP15 and STM32MP13 system bus ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards Oleksii Moisieiev (1): dt-bindings: Document common device controller bindings .../devicetree/bindings/bus/st,sys-bus.yaml | 127 + .../bindings/crypto/st,stm32-hash.yaml | 5 + .../devicetree/bindings/dma/st,stm32-dma.yaml | 5 + .../bindings/dma/st,stm32-dmamux.yaml | 5 + .../feature-domain-controller.yaml | 84 + .../devicetree/bindings/i2c/st,stm32-i2c.yaml | 5 + .../bindings/iio/adc/st,stm32-adc.yaml | 5 + .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 5 + .../bindings/iio/dac/st,stm32-dac.yaml | 5 + .../bindings/media/st,stm32-cec.yaml | 5 + .../bindings/media/st,stm32-dcmi.yaml | 5 + .../memory-controllers/st,stm32-fmc2-ebi.yaml | 5 + .../bindings/mfd/st,stm32-lptimer.yaml | 5 + .../bindings/mfd/st,stm32-timers.yaml | 6 + .../devicetree/bindings/mmc/arm,pl18x.yaml | 5 + .../devicetree/bindings/net/stm32-dwmac.yaml | 5 + .../bindings/phy/phy-stm32-usbphyc.yaml | 5 + .../bindings/regulator/st,stm32-vrefbuf.yaml | 5 + .../devicetree/bindings/rng/st,stm32-rng.yaml | 5 + .../bindings/serial/st,stm32-uart.yaml | 5 + .../bindings/sound/st,stm32-i2s.yaml | 5 + .../bindings/sound/st,stm32-sai.yaml | 5 + .../bindings/sound/st,stm32-spdifrx.yaml | 5 + .../bindings/spi/st,stm32-qspi.yaml | 5 + .../devicetree/bindings/spi/st,stm32-spi.yaml | 5 + .../devicetree/bindings/usb/dwc2.yaml | 5 + MAINTAINERS | 6 + arch/arm/boot/dts/stm32mp131.dtsi | 407 +-- arch/arm/boot/dts/stm32mp133.dtsi | 51 +- arch/arm/boot/dts/stm32mp13xc.dtsi | 19 +- arch/arm/boot/dts/stm32mp13xf.dtsi | 18 +- arch/arm/boot/dts/stm32mp151.dtsi | 2722 +++++++++-------- arch/arm/boot/dts/stm32mp153.dtsi | 52 +- arch/arm/boot/dts/stm32mp15xc.dtsi | 19 +- drivers/bus/Kconfig | 9 + drivers/bus/Makefile | 1 + drivers/bus/stm32_sys_bus.c | 168 + 37 files changed, 2208 insertions(+), 1596 deletions(-) create mode 100644 Documentation/devicetree/bindings/bus/st,sys-bus.yaml create mode 100644 Documentation/devicetree/bindings/feature-controllers/feature-domain-controller.yaml create mode 100644 drivers/bus/stm32_sys_bus.c -- 2.35.3

7 23

[PATCH 1/2] ASoC: fsl-asoc-card: add nau8822 support
by Hui Wang 22 Jun '23

22 Jun '23

This is for an imx6sx EVB which has a nau8822 codec connects to the SSI2 interface, so add the nau8822 support in this machine driver. Because the codec driver nau8822.c doesn't handle mclk enabling, here adding a codec_priv->mclk for nau8822 and similar codecs which need to enable the mclk in the machine driver, and enable the mclk in the card_late_probe() conditionally. Signed-off-by: Hui Wang <hui.wang(a)canonical.com> --- sound/soc/fsl/fsl-asoc-card.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c index d9a0d4768c4d..89504865cb1d 100644 --- a/sound/soc/fsl/fsl-asoc-card.c +++ b/sound/soc/fsl/fsl-asoc-card.c @@ -27,6 +27,7 @@ #include "../codecs/wm8960.h" #include "../codecs/wm8994.h" #include "../codecs/tlv320aic31xx.h" +#include "../codecs/nau8822.h" #define CS427x_SYSCLK_MCLK 0 @@ -45,6 +46,7 @@ * @pll_id: PLL id for set_pll() */ struct codec_priv { + struct clk *mclk; unsigned long mclk_freq; unsigned long free_freq; u32 mclk_id; @@ -522,6 +524,9 @@ static int fsl_asoc_card_late_probe(struct snd_soc_card *card) return ret; } + if (!IS_ERR_OR_NULL(codec_priv->mclk)) + clk_prepare_enable(codec_priv->mclk); + return 0; } @@ -682,6 +687,14 @@ static int fsl_asoc_card_probe(struct platform_device *pdev) priv->codec_priv.free_freq = priv->codec_priv.mclk_freq; priv->card.dapm_routes = NULL; priv->card.num_dapm_routes = 0; + } else if (of_device_is_compatible(np, "fsl,imx-audio-nau8822")) { + codec_dai_name = "nau8822-hifi"; + priv->codec_priv.mclk_id = NAU8822_CLK_MCLK; + priv->codec_priv.fll_id = NAU8822_CLK_PLL; + priv->codec_priv.pll_id = NAU8822_CLK_PLL; + priv->dai_fmt |= SND_SOC_DAIFMT_CBM_CFM; + if (codec_dev) + priv->codec_priv.mclk = devm_clk_get(codec_dev, NULL); } else { dev_err(&pdev->dev, "unknown Device Tree compatible\n"); ret = -EINVAL; @@ -907,6 +920,7 @@ static const struct of_device_id fsl_asoc_card_dt_ids[] = { { .compatible = "fsl,imx-audio-wm8524", }, { .compatible = "fsl,imx-audio-si476x", }, { .compatible = "fsl,imx-audio-wm8958", }, + { .compatible = "fsl,imx-audio-nau8822", }, {} }; MODULE_DEVICE_TABLE(of, fsl_asoc_card_dt_ids); -- 2.25.1

2 2

[regression] Bug 216818 - The microphone mute led not working after linux 6
by Thorsten Leemhuis 20 Jun '23

20 Jun '23

Hi, this is your Linux kernel regression tracker speaking. I noticed a regression report in bugzilla.kernel.org. As many (most?) kernel developer don't keep an eye on it, I decided to forward it by mail. Quoting from https://bugzilla.kernel.org/show_bug.cgi?id=216818 : > sonic82003(a)gmail.com 2022-12-18 08:52:32 UTC > > The mic mute led of my ThinkPad X1 Carbon Gen 9 doesn't work anymore after updating linux to version 6. > I can still turn it on by running > > echo 1 > /sys/class/leds/platform::micmute/brightness > > With linux-lts it still works fine. See the ticket for more details. Note, I found a similar report that (despite my attempts to prevent things like this from happening) fell through the cracks here: https://bugzilla.kernel.org/show_bug.cgi?id=216355 > plum 2022-08-13 02:11:01 UTC > > I upgrade to kernel 5.19.1 but found my thinkpad x1 carbon 2021's mute led stop working. > > Function is okay but LED won't light up. > > Back to kernel 5.18 and it's normal and working again. > > Fedora 36 64 bit > Gnome-shell 42 >From a quick research it looks to me like this is an issue for the sounds maintainers, as the LED itself apparently works. If that is something for the platform people instead please speak up. BTW, let me use this mail to also add the report to the list of tracked regressions to ensure it's doesn't fall through the cracks: #regzbot introduced: v5.18..v5.19 https://bugzilla.kernel.org/show_bug.cgi?id=216818 #regzbot ignore-activity Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat) P.S.: As the Linux kernel's regression tracker I deal with a lot of reports and sometimes miss something important when writing mails like this. If that's the case here, don't hesitate to tell me in a public reply, it's in everyone's interest to set the public record straight.

5 5

[PATCH] kselftest/alsa: Increase kselftest timeout
by Nícolas F. R. A. Prado 16 Jun '23

16 Jun '23

The default timeout for kselftests is 45 seconds, but pcm-test can take longer than that to run depending on the number of PCMs present on a device. As a data point, running pcm-test on mt8192-asurada-spherion takes about 1m15s. Set the timeout to 10 minutes, which should give enough slack to run the test even on devices with many PCMs. Signed-off-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> --- tools/testing/selftests/alsa/settings | 1 + 1 file changed, 1 insertion(+) create mode 100644 tools/testing/selftests/alsa/settings diff --git a/tools/testing/selftests/alsa/settings b/tools/testing/selftests/alsa/settings new file mode 100644 index 000000000000..a62d2fa1275c --- /dev/null +++ b/tools/testing/selftests/alsa/settings @@ -0,0 +1 @@ +timeout=600 -- 2.39.0

4 5

[PATCH v2 00/65] clk: Make determine_rate mandatory for muxes
by Maxime Ripard 05 Apr '23

05 Apr '23

Hi, This is a follow-up to a previous series that was printing a warning when a mux has a set_parent implementation but is missing determine_rate(). The rationale is that set_parent() is very likely to be useful when changing the rate, but it's determine_rate() that takes the parenting decision. If we're missing it, then the current parent is always going to be used, and thus set_parent() will not be used. The only exception being a direct call to clk_set_parent(), but those are fairly rare compared to clk_set_rate(). Stephen then asked to promote the warning to an error, and to fix up all the muxes that are in that situation first. So here it is :) Let me know what you think, Maxime To: Michael Turquette <mturquette(a)baylibre.com> To: Stephen Boyd <sboyd(a)kernel.org> To: Andreas Färber <afaerber(a)suse.de> To: Manivannan Sadhasivam <mani(a)kernel.org> To: Nicolas Ferre <nicolas.ferre(a)microchip.com> To: Alexandre Belloni <alexandre.belloni(a)bootlin.com> To: Claudiu Beznea <claudiu.beznea(a)microchip.com> To: Max Filippov <jcmvbkbc(a)gmail.com> To: Charles Keepax <ckeepax(a)opensource.cirrus.com> To: Richard Fitzgerald <rf(a)opensource.cirrus.com> To: Maxime Coquelin <mcoquelin.stm32(a)gmail.com> To: Alexandre Torgue <alexandre.torgue(a)foss.st.com> To: Luca Ceresoli <luca.ceresoli(a)bootlin.com> To: David Lechner <david(a)lechnology.com> To: Sekhar Nori <nsekhar(a)ti.com> To: Abel Vesa <abelvesa(a)kernel.org> To: Shawn Guo <shawnguo(a)kernel.org> To: Sascha Hauer <s.hauer(a)pengutronix.de> To: Pengutronix Kernel Team <kernel(a)pengutronix.de> To: Fabio Estevam <festevam(a)gmail.com> To: NXP Linux Team <linux-imx(a)nxp.com> To: Matthias Brugger <matthias.bgg(a)gmail.com> To: Geert Uytterhoeven <geert+renesas(a)glider.be> To: Dinh Nguyen <dinguyen(a)kernel.org> To: Peter De Schrijver <pdeschrijver(a)nvidia.com> To: Prashant Gaikwad <pgaikwad(a)nvidia.com> To: Thierry Reding <thierry.reding(a)gmail.com> To: Jonathan Hunter <jonathanh(a)nvidia.com> To: Ulf Hansson <ulf.hansson(a)linaro.org> To: Linus Walleij <linus.walleij(a)linaro.org> To: David Airlie <airlied(a)gmail.com> To: Daniel Vetter <daniel(a)ffwll.ch> To: Vinod Koul <vkoul(a)kernel.org> To: Kishon Vijay Abraham I <kishon(a)kernel.org> To: Alessandro Zummo <a.zummo(a)towertech.it> To: Chen-Yu Tsai <wens(a)csie.org> To: Jernej Skrabec <jernej.skrabec(a)gmail.com> To: Samuel Holland <samuel(a)sholland.org> To: Liam Girdwood <lgirdwood(a)gmail.com> To: Mark Brown <broonie(a)kernel.org> To: Jaroslav Kysela <perex(a)perex.cz> To: Takashi Iwai <tiwai(a)suse.com> To: Paul Cercueil <paul(a)crapouillou.net> To: Orson Zhai <orsonzhai(a)gmail.com> To: Baolin Wang <baolin.wang(a)linux.alibaba.com> To: Chunyan Zhang <zhang.lyra(a)gmail.com> Cc: linux-clk(a)vger.kernel.org Cc: linux-kernel(a)vger.kernel.org Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno(a)collabora.com> Cc: linux-arm-kernel(a)lists.infradead.org Cc: linux-actions(a)lists.infradead.org Cc: patches(a)opensource.cirrus.com Cc: linux-stm32(a)st-md-mailman.stormreply.com Cc: linux-mediatek(a)lists.infradead.org Cc: linux-renesas-soc(a)vger.kernel.org Cc: linux-tegra(a)vger.kernel.org Cc: dri-devel(a)lists.freedesktop.org Cc: linux-phy(a)lists.infradead.org Cc: linux-rtc(a)vger.kernel.org Cc: linux-sunxi(a)lists.linux.dev Cc: alsa-devel(a)alsa-project.org Cc: linux-mips(a)vger.kernel.org Signed-off-by: Maxime Ripard <maxime(a)cerno.tech> --- Changes in v2: - Drop all the patches already applied - Promote the clk registration warning to an error - Make all muxes use determine_rate - Link to v1: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v1-0-f3ef80518140… --- Maxime Ripard (65): clk: Export clk_hw_forward_rate_request() clk: lan966x: Remove unused round_rate hook clk: nodrv: Add a determine_rate hook clk: test: Add a determine_rate hook clk: actions: composite: Add a determine_rate hook for pass clk clk: at91: main: Add a determine_rate hook clk: at91: sckc: Add a determine_rate hook clk: berlin: div: Add a determine_rate hook clk: cdce706: Add a determine_rate hook clk: k210: pll: Add a determine_rate hook clk: k210: aclk: Add a determine_rate hook clk: k210: mux: Add a determine_rate hook clk: lmk04832: clkout: Add a determine_rate hook clk: lochnagar: Add a determine_rate hook clk: qoriq: Add a determine_rate hook clk: si5341: Add a determine_rate hook clk: stm32f4: mux: Add a determine_rate hook clk: vc5: mux: Add a determine_rate hook clk: vc5: clkout: Add a determine_rate hook clk: wm831x: clkout: Add a determine_rate hook clk: davinci: da8xx-cfgchip: Add a determine_rate hook clk: davinci: da8xx-cfgchip: Add a determine_rate hook clk: imx: busy: Add a determine_rate hook clk: imx: fixup-mux: Add a determine_rate hook clk: imx: scu: Add a determine_rate hook clk: mediatek: cpumux: Add a determine_rate hook clk: pxa: Add a determine_rate hook clk: renesas: r9a06g032: Add a determine_rate hook clk: socfpga: gate: Add a determine_rate hook clk: stm32: core: Add a determine_rate hook clk: tegra: bpmp: Add a determine_rate hook clk: tegra: super: Add a determine_rate hook clk: tegra: periph: Add a determine_rate hook clk: ux500: prcmu: Add a determine_rate hook clk: ux500: sysctrl: Add a determine_rate hook clk: versatile: sp810: Add a determine_rate hook drm/tegra: sor: Add a determine_rate hook phy: cadence: sierra: Add a determine_rate hook phy: cadence: torrent: Add a determine_rate hook phy: ti: am654-serdes: Add a determine_rate hook phy: ti: j721e-wiz: Add a determine_rate hook rtc: sun6i: Add a determine_rate hook ASoC: tlv320aic32x4: Add a determine_rate hook clk: actions: composite: div: Switch to determine_rate clk: actions: composite: fact: Switch to determine_rate clk: at91: smd: Switch to determine_rate clk: axi-clkgen: Switch to determine_rate clk: cdce706: divider: Switch to determine_rate clk: cdce706: clkout: Switch to determine_rate clk: si5341: Switch to determine_rate clk: si5351: pll: Switch to determine_rate clk: si5351: msynth: Switch to determine_rate clk: si5351: clkout: Switch to determine_rate clk: da8xx: clk48: Switch to determine_rate clk: imx: scu: Switch to determine_rate clk: ingenic: cgu: Switch to determine_rate clk: ingenic: tcu: Switch to determine_rate clk: sprd: composite: Switch to determine_rate clk: st: flexgen: Switch to determine_rate clk: stm32: composite: Switch to determine_rate clk: tegra: periph: Switch to determine_rate clk: tegra: super: Switch to determine_rate ASoC: tlv320aic32x4: pll: Switch to determine_rate ASoC: tlv320aic32x4: div: Switch to determine_rate clk: Warn if we register a mux without determine_rate drivers/clk/actions/owl-composite.c | 35 +++++++++++----- drivers/clk/actions/owl-composite.h | 2 +- drivers/clk/at91/clk-main.c | 3 +- drivers/clk/at91/clk-smd.c | 29 +++++++------ drivers/clk/at91/sckc.c | 3 +- drivers/clk/berlin/berlin2-div.c | 3 +- drivers/clk/clk-axi-clkgen.c | 14 ++++--- drivers/clk/clk-cdce706.c | 31 ++++++++------ drivers/clk/clk-k210.c | 17 +++++--- drivers/clk/clk-lan966x.c | 17 -------- drivers/clk/clk-lmk04832.c | 1 + drivers/clk/clk-lochnagar.c | 2 + drivers/clk/clk-qoriq.c | 10 +++-- drivers/clk/clk-si5341.c | 21 +++++----- drivers/clk/clk-si5351.c | 67 +++++++++++++++++-------------- drivers/clk/clk-stm32f4.c | 3 +- drivers/clk/clk-versaclock5.c | 8 ++-- drivers/clk/clk-wm831x.c | 3 +- drivers/clk/clk.c | 15 +++++++ drivers/clk/clk_test.c | 1 + drivers/clk/davinci/da8xx-cfgchip.c | 15 ++++--- drivers/clk/imx/clk-busy.c | 3 +- drivers/clk/imx/clk-fixup-mux.c | 3 +- drivers/clk/imx/clk-scu.c | 27 +++++++++++-- drivers/clk/ingenic/cgu.c | 15 +++---- drivers/clk/ingenic/tcu.c | 19 +++++---- drivers/clk/mediatek/clk-cpumux.c | 3 +- drivers/clk/pxa/clk-pxa.c | 3 +- drivers/clk/renesas/r9a06g032-clocks.c | 3 +- drivers/clk/socfpga/clk-gate.c | 3 +- drivers/clk/sprd/composite.c | 16 +++++--- drivers/clk/st/clk-flexgen.c | 15 +++---- drivers/clk/stm32/clk-stm32-core.c | 32 ++++++++++----- drivers/clk/tegra/clk-bpmp.c | 7 +++- drivers/clk/tegra/clk-periph.c | 19 ++++++--- drivers/clk/tegra/clk-super.c | 18 ++++++--- drivers/clk/ux500/clk-prcmu.c | 3 +- drivers/clk/ux500/clk-sysctrl.c | 4 +- drivers/clk/versatile/clk-sp810.c | 3 +- drivers/gpu/drm/tegra/sor.c | 3 +- drivers/phy/cadence/phy-cadence-sierra.c | 1 + drivers/phy/cadence/phy-cadence-torrent.c | 1 + drivers/phy/ti/phy-am654-serdes.c | 1 + drivers/phy/ti/phy-j721e-wiz.c | 1 + drivers/rtc/rtc-sun6i.c | 2 + sound/soc/codecs/tlv320aic32x4-clk.c | 37 ++++++++++------- 46 files changed, 343 insertions(+), 199 deletions(-) --- base-commit: 61c3426aca2c71052ddcd06c32e29d92304990fd change-id: 20221018-clk-range-checks-fixes-2039f3523240 Best regards, -- Maxime Ripard <maxime(a)cerno.tech>

13 114

[PATCH v2] kselftest/alsa: Increase kselftest timeout
by Nícolas F. R. A. Prado 03 Apr '23

03 Apr '23

The default timeout for kselftests is 45 seconds, but that isn't enough time to run pcm-test when there are many PCMs on the device, nor for mixer-test when slower control buses and fancier CODECs are present. As data points, running pcm-test on mt8192-asurada-spherion takes about 1m15s, and mixer-test on rk3399-gru-kevin takes about 2m. Set the timeout to 4 minutes to allow both pcm-test and mixer-test to run to completion with some slack. Reviewed-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> --- Changes in v2: - Reduced timeout from 10 to 4 minutes - Tweaked commit message to also mention mixer-test and run time for mixer-test on rk3399-gru-kevin tools/testing/selftests/alsa/settings | 1 + 1 file changed, 1 insertion(+) create mode 100644 tools/testing/selftests/alsa/settings diff --git a/tools/testing/selftests/alsa/settings b/tools/testing/selftests/alsa/settings new file mode 100644 index 000000000000..b478e684846a --- /dev/null +++ b/tools/testing/selftests/alsa/settings @@ -0,0 +1 @@ +timeout=240 -- 2.39.0

3 3

Re: [PATCH] kernel/drivers: Remove redundant driver match function
by Uwe Kleine-König 19 Mar '23

19 Mar '23

Hello, On Thu, May 05, 2022 at 09:59:52PM -0700, lizhe wrote: > If there is no driver match function, the driver core assumes that each > candidate pair (driver, device) matches, see driver_match_device(). I wonder who is supposed to apply this patch. Either it should be split by file and go in via the respective maintainers, or it goes in via Greg's tree? I added Greg to To: for him to chime in. Best regards Uwe > Signed-off-by: lizhe <sensor1010(a)163.com> > --- > drivers/mfd/mcp-core.c | 6 ------ > drivers/nubus/bus.c | 6 ------ > drivers/s390/crypto/vfio_ap_drv.c | 6 ------ > drivers/scsi/scsi_debug.c | 7 ------- > drivers/target/loopback/tcm_loop.c | 7 ------- > drivers/w1/w1.c | 6 ------ > sound/ac97_bus.c | 11 ----------- > 7 files changed, 49 deletions(-) > > diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c > index 2fa592c37c6f..281a9369f2b3 100644 > --- a/drivers/mfd/mcp-core.c > +++ b/drivers/mfd/mcp-core.c > @@ -20,11 +20,6 @@ > #define to_mcp(d) container_of(d, struct mcp, attached_device) > #define to_mcp_driver(d) container_of(d, struct mcp_driver, drv) > > -static int mcp_bus_match(struct device *dev, struct device_driver *drv) > -{ > - return 1; > -} > - > static int mcp_bus_probe(struct device *dev) > { > struct mcp *mcp = to_mcp(dev); > @@ -43,7 +38,6 @@ static void mcp_bus_remove(struct device *dev) > > static struct bus_type mcp_bus_type = { > .name = "mcp", > - .match = mcp_bus_match, > .probe = mcp_bus_probe, > .remove = mcp_bus_remove, > }; > diff --git a/drivers/nubus/bus.c b/drivers/nubus/bus.c > index 17fad660032c..72921e4f35f6 100644 > --- a/drivers/nubus/bus.c > +++ b/drivers/nubus/bus.c > @@ -14,11 +14,6 @@ > #define to_nubus_board(d) container_of(d, struct nubus_board, dev) > #define to_nubus_driver(d) container_of(d, struct nubus_driver, driver) > > -static int nubus_bus_match(struct device *dev, struct device_driver *driver) > -{ > - return 1; > -} > - > static int nubus_device_probe(struct device *dev) > { > struct nubus_driver *ndrv = to_nubus_driver(dev->driver); > @@ -39,7 +34,6 @@ static void nubus_device_remove(struct device *dev) > > struct bus_type nubus_bus_type = { > .name = "nubus", > - .match = nubus_bus_match, > .probe = nubus_device_probe, > .remove = nubus_device_remove, > }; > diff --git a/drivers/s390/crypto/vfio_ap_drv.c b/drivers/s390/crypto/vfio_ap_drv.c > index 29ebd54f8919..0a662c451f2a 100644 > --- a/drivers/s390/crypto/vfio_ap_drv.c > +++ b/drivers/s390/crypto/vfio_ap_drv.c > @@ -172,14 +172,8 @@ static void vfio_ap_matrix_dev_release(struct device *dev) > kfree(matrix_dev); > } > > -static int matrix_bus_match(struct device *dev, struct device_driver *drv) > -{ > - return 1; > -} > - > static struct bus_type matrix_bus = { > .name = "matrix", > - .match = &matrix_bus_match, > }; > > static struct device_driver matrix_driver = { > diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c > index 592a290e6cfa..8107489b36e8 100644 > --- a/drivers/scsi/scsi_debug.c > +++ b/drivers/scsi/scsi_debug.c > @@ -7844,15 +7844,8 @@ static void sdebug_driver_remove(struct device *dev) > scsi_host_put(sdbg_host->shost); > } > > -static int pseudo_lld_bus_match(struct device *dev, > - struct device_driver *dev_driver) > -{ > - return 1; > -} > - > static struct bus_type pseudo_lld_bus = { > .name = "pseudo", > - .match = pseudo_lld_bus_match, > .probe = sdebug_driver_probe, > .remove = sdebug_driver_remove, > .drv_groups = sdebug_drv_groups, > diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c > index 4407b56aa6d1..eeb63deff94f 100644 > --- a/drivers/target/loopback/tcm_loop.c > +++ b/drivers/target/loopback/tcm_loop.c > @@ -83,15 +83,8 @@ static int tcm_loop_show_info(struct seq_file *m, struct Scsi_Host *host) > static int tcm_loop_driver_probe(struct device *); > static void tcm_loop_driver_remove(struct device *); > > -static int pseudo_lld_bus_match(struct device *dev, > - struct device_driver *dev_driver) > -{ > - return 1; > -} > - > static struct bus_type tcm_loop_lld_bus = { > .name = "tcm_loop_bus", > - .match = pseudo_lld_bus_match, > .probe = tcm_loop_driver_probe, > .remove = tcm_loop_driver_remove, > }; > diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c > index f2ae2e563dc5..a6ecfa1b3417 100644 > --- a/drivers/w1/w1.c > +++ b/drivers/w1/w1.c > @@ -58,11 +58,6 @@ MODULE_PARM_DESC(slave_ttl, > DEFINE_MUTEX(w1_mlock); > LIST_HEAD(w1_masters); > > -static int w1_master_match(struct device *dev, struct device_driver *drv) > -{ > - return 1; > -} > - > static int w1_master_probe(struct device *dev) > { > return -ENODEV; > @@ -174,7 +169,6 @@ static int w1_uevent(struct device *dev, struct kobj_uevent_env *env); > > static struct bus_type w1_bus_type = { > .name = "w1", > - .match = w1_master_match, > .uevent = w1_uevent, > }; > > diff --git a/sound/ac97_bus.c b/sound/ac97_bus.c > index b4685c53ff11..c7aee8c42c55 100644 > --- a/sound/ac97_bus.c > +++ b/sound/ac97_bus.c > @@ -75,19 +75,8 @@ int snd_ac97_reset(struct snd_ac97 *ac97, bool try_warm, unsigned int id, > } > EXPORT_SYMBOL_GPL(snd_ac97_reset); > > -/* > - * Let drivers decide whether they want to support given codec from their > - * probe method. Drivers have direct access to the struct snd_ac97 > - * structure and may decide based on the id field amongst other things. > - */ > -static int ac97_bus_match(struct device *dev, struct device_driver *drv) > -{ > - return 1; > -} > - > struct bus_type ac97_bus_type = { > .name = "ac97", > - .match = ac97_bus_match, > }; > > static int __init ac97_bus_init(void) > -- > 2.25.1 > > -- Pengutronix e.K. | Uwe Kleine-König | Industrial Linux Solutions | https://www.pengutronix.de/ |

3 2

[PATCH v3 0/4] ASoC: microchip: power saving features and cleanups
by Claudiu Beznea 10 Mar '23

10 Mar '23

Hi, The following series adds runtime PM and suspend to RAM features for mchp-pdmc driver. Along with it 2 cleanup patches were added: - patch 1/4: use vendor,device.yaml file format for Microchip AT91 ASoC bindings - patch 4/4: use FIELD_PREP() in mchp-spdiftx.c Thank you, Claudiu Beznea Changes in v3: - in patch 1/4 add back microchip,sama7g5-i2smcc.yaml as it was removed by mistake in v2 - in patch 1/4 fixed the schema id to match the new naming Changes in v2: - s/microchip,sama7g5-i2s-mcc/microchip,sama7g5-i2smcc as this is the 1st available compatible Claudiu Beznea (4): ASoC: dt-bindings: microchip: use proper naming syntax ASoC: mchp-pdmc: use runtime pm for clock power saving ASoC: mchp-pdmc: add support for suspend to RAM ASoC: mchp-spdiftx: use FIELD_PREP() where possible ...mcc.yaml => microchip,sama7g5-i2smcc.yaml} | 2 +- ...,pdmc.yaml => microchip,sama7g5-pdmc.yaml} | 2 +- ...rx.yaml => microchip,sama7g5-spdifrx.yaml} | 2 +- ...tx.yaml => microchip,sama7g5-spdiftx.yaml} | 2 +- sound/soc/atmel/mchp-pdmc.c | 145 ++++++++++++------ sound/soc/atmel/mchp-spdiftx.c | 8 +- 6 files changed, 105 insertions(+), 56 deletions(-) rename Documentation/devicetree/bindings/sound/{mchp,i2s-mcc.yaml => microchip,sama7g5-i2smcc.yaml} (97%) rename Documentation/devicetree/bindings/sound/{microchip,pdmc.yaml => microchip,sama7g5-pdmc.yaml} (97%) rename Documentation/devicetree/bindings/sound/{mchp,spdifrx.yaml => microchip,sama7g5-spdifrx.yaml} (95%) rename Documentation/devicetree/bindings/sound/{mchp,spdiftx.yaml => microchip,sama7g5-spdiftx.yaml} (95%) -- 2.34.1

3 7