September 2022 - Alsa-devel - mailman.alsa-project.org

Re: [PATCH] kernel/drivers: Remove redundant driver match function
by Uwe Kleine-König 19 Mar '23

19 Mar '23

Hello, On Thu, May 05, 2022 at 09:59:52PM -0700, lizhe wrote: > If there is no driver match function, the driver core assumes that each > candidate pair (driver, device) matches, see driver_match_device(). I wonder who is supposed to apply this patch. Either it should be split by file and go in via the respective maintainers, or it goes in via Greg's tree? I added Greg to To: for him to chime in. Best regards Uwe > Signed-off-by: lizhe <sensor1010(a)163.com> > --- > drivers/mfd/mcp-core.c | 6 ------ > drivers/nubus/bus.c | 6 ------ > drivers/s390/crypto/vfio_ap_drv.c | 6 ------ > drivers/scsi/scsi_debug.c | 7 ------- > drivers/target/loopback/tcm_loop.c | 7 ------- > drivers/w1/w1.c | 6 ------ > sound/ac97_bus.c | 11 ----------- > 7 files changed, 49 deletions(-) > > diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c > index 2fa592c37c6f..281a9369f2b3 100644 > --- a/drivers/mfd/mcp-core.c > +++ b/drivers/mfd/mcp-core.c > @@ -20,11 +20,6 @@ > #define to_mcp(d) container_of(d, struct mcp, attached_device) > #define to_mcp_driver(d) container_of(d, struct mcp_driver, drv) > > -static int mcp_bus_match(struct device *dev, struct device_driver *drv) > -{ > - return 1; > -} > - > static int mcp_bus_probe(struct device *dev) > { > struct mcp *mcp = to_mcp(dev); > @@ -43,7 +38,6 @@ static void mcp_bus_remove(struct device *dev) > > static struct bus_type mcp_bus_type = { > .name = "mcp", > - .match = mcp_bus_match, > .probe = mcp_bus_probe, > .remove = mcp_bus_remove, > }; > diff --git a/drivers/nubus/bus.c b/drivers/nubus/bus.c > index 17fad660032c..72921e4f35f6 100644 > --- a/drivers/nubus/bus.c > +++ b/drivers/nubus/bus.c > @@ -14,11 +14,6 @@ > #define to_nubus_board(d) container_of(d, struct nubus_board, dev) > #define to_nubus_driver(d) container_of(d, struct nubus_driver, driver) > > -static int nubus_bus_match(struct device *dev, struct device_driver *driver) > -{ > - return 1; > -} > - > static int nubus_device_probe(struct device *dev) > { > struct nubus_driver *ndrv = to_nubus_driver(dev->driver); > @@ -39,7 +34,6 @@ static void nubus_device_remove(struct device *dev) > > struct bus_type nubus_bus_type = { > .name = "nubus", > - .match = nubus_bus_match, > .probe = nubus_device_probe, > .remove = nubus_device_remove, > }; > diff --git a/drivers/s390/crypto/vfio_ap_drv.c b/drivers/s390/crypto/vfio_ap_drv.c > index 29ebd54f8919..0a662c451f2a 100644 > --- a/drivers/s390/crypto/vfio_ap_drv.c > +++ b/drivers/s390/crypto/vfio_ap_drv.c > @@ -172,14 +172,8 @@ static void vfio_ap_matrix_dev_release(struct device *dev) > kfree(matrix_dev); > } > > -static int matrix_bus_match(struct device *dev, struct device_driver *drv) > -{ > - return 1; > -} > - > static struct bus_type matrix_bus = { > .name = "matrix", > - .match = &matrix_bus_match, > }; > > static struct device_driver matrix_driver = { > diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c > index 592a290e6cfa..8107489b36e8 100644 > --- a/drivers/scsi/scsi_debug.c > +++ b/drivers/scsi/scsi_debug.c > @@ -7844,15 +7844,8 @@ static void sdebug_driver_remove(struct device *dev) > scsi_host_put(sdbg_host->shost); > } > > -static int pseudo_lld_bus_match(struct device *dev, > - struct device_driver *dev_driver) > -{ > - return 1; > -} > - > static struct bus_type pseudo_lld_bus = { > .name = "pseudo", > - .match = pseudo_lld_bus_match, > .probe = sdebug_driver_probe, > .remove = sdebug_driver_remove, > .drv_groups = sdebug_drv_groups, > diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c > index 4407b56aa6d1..eeb63deff94f 100644 > --- a/drivers/target/loopback/tcm_loop.c > +++ b/drivers/target/loopback/tcm_loop.c > @@ -83,15 +83,8 @@ static int tcm_loop_show_info(struct seq_file *m, struct Scsi_Host *host) > static int tcm_loop_driver_probe(struct device *); > static void tcm_loop_driver_remove(struct device *); > > -static int pseudo_lld_bus_match(struct device *dev, > - struct device_driver *dev_driver) > -{ > - return 1; > -} > - > static struct bus_type tcm_loop_lld_bus = { > .name = "tcm_loop_bus", > - .match = pseudo_lld_bus_match, > .probe = tcm_loop_driver_probe, > .remove = tcm_loop_driver_remove, > }; > diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c > index f2ae2e563dc5..a6ecfa1b3417 100644 > --- a/drivers/w1/w1.c > +++ b/drivers/w1/w1.c > @@ -58,11 +58,6 @@ MODULE_PARM_DESC(slave_ttl, > DEFINE_MUTEX(w1_mlock); > LIST_HEAD(w1_masters); > > -static int w1_master_match(struct device *dev, struct device_driver *drv) > -{ > - return 1; > -} > - > static int w1_master_probe(struct device *dev) > { > return -ENODEV; > @@ -174,7 +169,6 @@ static int w1_uevent(struct device *dev, struct kobj_uevent_env *env); > > static struct bus_type w1_bus_type = { > .name = "w1", > - .match = w1_master_match, > .uevent = w1_uevent, > }; > > diff --git a/sound/ac97_bus.c b/sound/ac97_bus.c > index b4685c53ff11..c7aee8c42c55 100644 > --- a/sound/ac97_bus.c > +++ b/sound/ac97_bus.c > @@ -75,19 +75,8 @@ int snd_ac97_reset(struct snd_ac97 *ac97, bool try_warm, unsigned int id, > } > EXPORT_SYMBOL_GPL(snd_ac97_reset); > > -/* > - * Let drivers decide whether they want to support given codec from their > - * probe method. Drivers have direct access to the struct snd_ac97 > - * structure and may decide based on the id field amongst other things. > - */ > -static int ac97_bus_match(struct device *dev, struct device_driver *drv) > -{ > - return 1; > -} > - > struct bus_type ac97_bus_type = { > .name = "ac97", > - .match = ac97_bus_match, > }; > > static int __init ac97_bus_init(void) > -- > 2.25.1 > > -- Pengutronix e.K. | Uwe Kleine-König | Industrial Linux Solutions | https://www.pengutronix.de/ |

3 2

soundwire: user space test utilities
by Muni Sekhar 06 Mar '23

06 Mar '23

Hi all, I am looking for any existing user space test utilities to test SOUNDWIRE SUBSYSTEM in Linux kernel. Can someone please point me to this. -- Thanks, Sekhar

2 4

[PATCH][next] ASoC: uapi: Replace zero-length arrays with __DECLARE_FLEX_ARRAY() helper
by Gustavo A. R. Silva 03 Feb '23

03 Feb '23

Zero-length arrays are deprecated and we are moving towards adopting C99 flexible-array members, instead. So, replace zero-length arrays declarations in anonymous union with the new __DECLARE_FLEX_ARRAY() helper macro. This helper allows for flexible-array members in unions. Link: https://github.com/KSPP/linux/issues/193 Link: https://github.com/KSPP/linux/issues/227 Link: https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html Signed-off-by: Gustavo A. R. Silva <gustavoars(a)kernel.org> --- include/uapi/sound/asoc.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/uapi/sound/asoc.h b/include/uapi/sound/asoc.h index 053949287ce8..dd8ad790fc15 100644 --- a/include/uapi/sound/asoc.h +++ b/include/uapi/sound/asoc.h @@ -226,9 +226,9 @@ struct snd_soc_tplg_vendor_array { __le32 type; /* SND_SOC_TPLG_TUPLE_TYPE_ */ __le32 num_elems; /* number of elements in array */ union { - struct snd_soc_tplg_vendor_uuid_elem uuid[0]; - struct snd_soc_tplg_vendor_value_elem value[0]; - struct snd_soc_tplg_vendor_string_elem string[0]; + __DECLARE_FLEX_ARRAY(struct snd_soc_tplg_vendor_uuid_elem, uuid); + __DECLARE_FLEX_ARRAY(struct snd_soc_tplg_vendor_value_elem, value); + __DECLARE_FLEX_ARRAY(struct snd_soc_tplg_vendor_string_elem, string); }; } __attribute__((packed)); -- 2.34.1

5 11

[PATCH] Sound: pci/hda: Add quirk for HP Envy x360 ey0xxx
by Fae 02 Feb '23

02 Feb '23

This patch fixes speaker output on the HP Envy x360 ey0xxx The mic/speaker mute LEDs are still non-functional but they aren't required for basic funtionality Also the quirk is labeled ALC287_FIXUP_CS35L41_I2C_2 however it does not only apply to ALC287 Its function is the generic cs35l41 fixup telling the driver that there's 2 i2c speakers. It isn't actually specific to ALC287 I did have a bit of luck getting the mic mute LED to work but it was to finicky to submit ( I used the ALC245_FIXUP_HP_GPIO_LED quirk ) I had no luck getting the speaker mute LED to work Signed-off-by: Fae <faenkhauser(a)gmail.com> --- sound/pci/hda/cs35l41_hda.c | 3 ++- sound/pci/hda/patch_realtek.c | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/cs35l41_hda.c b/sound/pci/hda/cs35l41_hda.c index 129bffb431c22..21d8c2de128ff 100644 --- a/sound/pci/hda/cs35l41_hda.c +++ b/sound/pci/hda/cs35l41_hda.c @@ -1156,7 +1156,8 @@ static int cs35l41_no_acpi_dsd(struct cs35l41_hda *cs35l41, struct device *physd hw_cfg->valid = true; put_device(physdev); - if (strncmp(hid, "CLSA0100", 8) == 0) { + if ((strncmp(hid, "CLSA0100", 8) == 0) || + (strncmp(hid, "CSC3551", 7) == 0)) { hw_cfg->bst_type = CS35L41_EXT_BOOST_NO_VSPK_SWITCH; } else if (strncmp(hid, "CLSA0101", 8) == 0) { hw_cfg->bst_type = CS35L41_EXT_BOOST; diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 8a57636f622e9..e7053cbc6bb6e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9179,6 +9179,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x83b9, "HP Spectre x360", ALC269_FIXUP_HP_MUTE_LED_MIC3), SND_PCI_QUIRK(0x103c, 0x841c, "HP Pavilion 15-CK0xx", ALC269_FIXUP_HP_MUTE_LED_MIC3), SND_PCI_QUIRK(0x103c, 0x8497, "HP Envy x360", ALC269_FIXUP_HP_MUTE_LED_MIC3), + SND_PCI_QUIRK(0x103c, 0x8a31, "HP ENVY x360 2-in-1 Laptop 15-ey0xxx", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x103c, 0x84da, "HP OMEN dc0019-ur", ALC295_FIXUP_HP_OMEN), SND_PCI_QUIRK(0x103c, 0x84e7, "HP Pavilion 15", ALC269_FIXUP_HP_MUTE_LED_MIC3), SND_PCI_QUIRK(0x103c, 0x8519, "HP Spectre x360 15-df0xxx", ALC285_FIXUP_HP_SPECTRE_X360), -- 2.37.1

2 2

[PATCH] ASoC: qcom: apq8096: set driver name correctly
by Yassine Oudjana 01 Feb '23

01 Feb '23

From: Yassine Oudjana <y.oudjana(a)protonmail.com> Set driver name to allow matching different UCM2 configurations for the multiple devices sharing the same APQ8096 ASoC. Signed-off-by: Yassine Oudjana <y.oudjana(a)protonmail.com> --- sound/soc/qcom/apq8096.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/qcom/apq8096.c b/sound/soc/qcom/apq8096.c index c7b7d0864d1a..5d07b38f6d72 100644 --- a/sound/soc/qcom/apq8096.c +++ b/sound/soc/qcom/apq8096.c @@ -113,6 +113,7 @@ static int apq8096_platform_probe(struct platform_device *pdev) if (!card) return -ENOMEM; + card->driver_name = "apq8096"; card->dev = dev; card->owner = THIS_MODULE; dev_set_drvdata(dev, card); -- 2.36.1

2 1

[PATCH] ALSA: hda/hdmi: Use only dynamic PCM device allocation
by Jaroslav Kysela 27 Jan '23

27 Jan '23

Per discussion on the alsa-devel mailing list [1], the legacy PIN to PCM device mapping is obsolete nowadays. The maximum number of the simultaneously usable PCM devices is equal to the HDMI codec converters. Remove the extra PCM devices (beyond the detected converters) and force the use of the dynamic PCM device allocation. The legacy code is removed. I believe that all HDMI codecs have the jack sensing feature. Move the check to the codec probe function and print a warning, if a codec without this feature is detected. [1] https://lore.kernel.org/alsa-devel/2f37e0b2-1e82-8c0b-2bbd-1e5038d6ecc6@per… Cc: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> Signed-off-by: Jaroslav Kysela <perex(a)perex.cz> --- include/sound/hda_codec.h | 1 - sound/pci/hda/patch_hdmi.c | 153 +++++++----------------------------- sound/soc/codecs/hda.c | 3 - sound/soc/codecs/hdac_hda.c | 3 - 4 files changed, 28 insertions(+), 132 deletions(-) diff --git a/include/sound/hda_codec.h b/include/sound/hda_codec.h index 6d3c82c4b6ac..684e6131737e 100644 --- a/include/sound/hda_codec.h +++ b/include/sound/hda_codec.h @@ -258,7 +258,6 @@ struct hda_codec { unsigned int link_down_at_suspend:1; /* link down at runtime suspend */ unsigned int relaxed_resume:1; /* don't resume forcibly for jack */ unsigned int forced_resume:1; /* forced resume for jack */ - unsigned int mst_no_extra_pcms:1; /* no backup PCMs for DP-MST */ #ifdef CONFIG_PM unsigned long power_on_acct; diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index f27a4ee810e3..ac520c62ee70 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -167,8 +167,6 @@ struct hdmi_spec { struct hdmi_ops ops; bool dyn_pin_out; - bool dyn_pcm_assign; - bool dyn_pcm_no_legacy; /* hdmi interrupt trigger control flag for Nvidia codec */ bool hdmi_intr_trig_ctrl; bool intel_hsw_fixup; /* apply Intel platform-specific fixups */ @@ -1177,9 +1175,7 @@ static void pin_cvt_fixup(struct hda_codec *codec, spec->ops.pin_cvt_fixup(codec, per_pin, cvt_nid); } -/* called in hdmi_pcm_open when no pin is assigned to the PCM - * in dyn_pcm_assign mode. - */ +/* called in hdmi_pcm_open when no pin is assigned to the PCM */ static int hdmi_pcm_open_no_pin(struct hda_pcm_stream *hinfo, struct hda_codec *codec, struct snd_pcm_substream *substream) @@ -1247,19 +1243,12 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo, mutex_lock(&spec->pcm_lock); pin_idx = hinfo_to_pin_index(codec, hinfo); - if (!spec->dyn_pcm_assign) { - if (snd_BUG_ON(pin_idx < 0)) { - err = -EINVAL; - goto unlock; - } - } else { - /* no pin is assigned to the PCM - * PA need pcm open successfully when probe - */ - if (pin_idx < 0) { - err = hdmi_pcm_open_no_pin(hinfo, codec, substream); - goto unlock; - } + /* no pin is assigned to the PCM + * PA need pcm open successfully when probe + */ + if (pin_idx < 0) { + err = hdmi_pcm_open_no_pin(hinfo, codec, substream); + goto unlock; } err = hdmi_choose_cvt(codec, pin_idx, &cvt_idx, false); @@ -1364,43 +1353,6 @@ static int hdmi_find_pcm_slot(struct hdmi_spec *spec, { int i; - /* on the new machines, try to assign the pcm slot dynamically, - * not use the preferred fixed map (legacy way) anymore. - */ - if (spec->dyn_pcm_no_legacy) - goto last_try; - - /* - * generic_hdmi_build_pcms() may allocate extra PCMs on some - * platforms (with maximum of 'num_nids + dev_num - 1') - * - * The per_pin of pin_nid_idx=n and dev_id=m prefers to get pcm-n - * if m==0. This guarantees that dynamic pcm assignments are compatible - * with the legacy static per_pin-pcm assignment that existed in the - * days before DP-MST. - * - * Intel DP-MST prefers this legacy behavior for compatibility, too. - * - * per_pin of m!=0 prefers to get pcm=(num_nids + (m - 1)). - */ - - if (per_pin->dev_id == 0 || spec->intel_hsw_fixup) { - if (!test_bit(per_pin->pin_nid_idx, &spec->pcm_bitmap)) - return per_pin->pin_nid_idx; - } else { - i = spec->num_nids + (per_pin->dev_id - 1); - if (i < spec->pcm_used && !(test_bit(i, &spec->pcm_bitmap))) - return i; - } - - /* have a second try; check the area over num_nids */ - for (i = spec->num_nids; i < spec->pcm_used; i++) { - if (!test_bit(i, &spec->pcm_bitmap)) - return i; - } - - last_try: - /* the last try; check the empty slots in pins */ for (i = 0; i < spec->pcm_used; i++) { if (!test_bit(i, &spec->pcm_bitmap)) return i; @@ -1562,14 +1514,12 @@ static void update_eld(struct hda_codec *codec, */ pcm_jack = pin_idx_to_pcm_jack(codec, per_pin); - if (spec->dyn_pcm_assign) { - if (eld->eld_valid) { - hdmi_attach_hda_pcm(spec, per_pin); - hdmi_pcm_setup_pin(spec, per_pin); - } else { - hdmi_pcm_reset_pin(spec, per_pin); - hdmi_detach_hda_pcm(spec, per_pin); - } + if (eld->eld_valid) { + hdmi_attach_hda_pcm(spec, per_pin); + hdmi_pcm_setup_pin(spec, per_pin); + } else { + hdmi_pcm_reset_pin(spec, per_pin); + hdmi_detach_hda_pcm(spec, per_pin); } /* if pcm_idx == -1, it means this is in monitor connection event * we can get the correct pcm_idx now. @@ -1931,7 +1881,7 @@ static int hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid) * structures based on worst case. */ dev_num = spec->dev_num; - } else if (spec->dyn_pcm_assign && codec->dp_mst) { + } else if (codec->dp_mst) { dev_num = snd_hda_get_num_devices(codec, pin_nid) + 1; /* * spec->dev_num is the maxinum number of device entries @@ -1956,13 +1906,8 @@ static int hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid) if (!per_pin) return -ENOMEM; - if (spec->dyn_pcm_assign) { - per_pin->pcm = NULL; - per_pin->pcm_idx = -1; - } else { - per_pin->pcm = get_hdmi_pcm(spec, pin_idx); - per_pin->pcm_idx = pin_idx; - } + per_pin->pcm = NULL; + per_pin->pcm_idx = -1; per_pin->pin_nid = pin_nid; per_pin->pin_nid_idx = spec->num_nids; per_pin->dev_id = i; @@ -1971,6 +1916,8 @@ static int hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid) err = hdmi_read_pin_conn(codec, pin_idx); if (err < 0) return err; + if (!is_jack_detectable(codec, pin_nid)) + codec_warn(codec, "HDMI: pin NID 0x%x - jack not detectable\n", pin_nid); spec->num_pins++; } spec->num_nids++; @@ -2118,10 +2065,9 @@ static int generic_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo, mutex_lock(&spec->pcm_lock); pin_idx = hinfo_to_pin_index(codec, hinfo); - if (spec->dyn_pcm_assign && pin_idx < 0) { - /* when dyn_pcm_assign and pcm is not bound to a pin - * skip pin setup and return 0 to make audio playback - * be ongoing + if (pin_idx < 0) { + /* when pcm is not bound to a pin skip pin setup and return 0 + * to make audio playback be ongoing */ pin_cvt_fixup(codec, NULL, cvt_nid); snd_hda_codec_setup_stream(codec, cvt_nid, @@ -2224,7 +2170,7 @@ static int hdmi_pcm_close(struct hda_pcm_stream *hinfo, snd_hda_spdif_ctls_unassign(codec, pcm_idx); clear_bit(pcm_idx, &spec->pcm_in_use); pin_idx = hinfo_to_pin_index(codec, hinfo); - if (spec->dyn_pcm_assign && pin_idx < 0) + if (pin_idx < 0) goto unlock; if (snd_BUG_ON(pin_idx < 0)) { @@ -2322,21 +2268,8 @@ static int generic_hdmi_build_pcms(struct hda_codec *codec) struct hdmi_spec *spec = codec->spec; int idx, pcm_num; - /* - * for non-mst mode, pcm number is the same as before - * for DP MST mode without extra PCM, pcm number is same - * for DP MST mode with extra PCMs, pcm number is - * (nid number + dev_num - 1) - * dev_num is the device entry number in a pin - */ - - if (spec->dyn_pcm_no_legacy && codec->mst_no_extra_pcms) - pcm_num = spec->num_cvts; - else if (codec->mst_no_extra_pcms) - pcm_num = spec->num_nids; - else - pcm_num = spec->num_nids + spec->dev_num - 1; - + /* limit the PCM devices to the codec converters */ + pcm_num = spec->num_cvts; codec_dbg(codec, "hdmi: pcm_num set to %d\n", pcm_num); for (idx = 0; idx < pcm_num; idx++) { @@ -2375,17 +2308,12 @@ static int generic_hdmi_build_jack(struct hda_codec *codec, int pcm_idx) { char hdmi_str[32] = "HDMI/DP"; struct hdmi_spec *spec = codec->spec; - struct hdmi_spec_per_pin *per_pin = get_pin(spec, pcm_idx); struct snd_jack *jack; int pcmdev = get_pcm_rec(spec, pcm_idx)->device; int err; if (pcmdev > 0) sprintf(hdmi_str + strlen(hdmi_str), ",pcm=%d", pcmdev); - if (!spec->dyn_pcm_assign && - !is_jack_detectable(codec, per_pin->pin_nid)) - strncat(hdmi_str, " Phantom", - sizeof(hdmi_str) - strlen(hdmi_str) - 1); err = snd_jack_new(codec->card, hdmi_str, SND_JACK_AVOUT, &jack, true, false); @@ -2418,18 +2346,9 @@ static int generic_hdmi_build_controls(struct hda_codec *codec) /* create the spdif for each pcm * pin will be bound when monitor is connected */ - if (spec->dyn_pcm_assign) - err = snd_hda_create_dig_out_ctls(codec, + err = snd_hda_create_dig_out_ctls(codec, 0, spec->cvt_nids[0], HDA_PCM_TYPE_HDMI); - else { - struct hdmi_spec_per_pin *per_pin = - get_pin(spec, pcm_idx); - err = snd_hda_create_dig_out_ctls(codec, - per_pin->pin_nid, - per_pin->mux_nids[0], - HDA_PCM_TYPE_HDMI); - } if (err < 0) return err; snd_hda_spdif_ctls_unassign(codec, pcm_idx); @@ -2549,11 +2468,7 @@ static void generic_hdmi_free(struct hda_codec *codec) for (pcm_idx = 0; pcm_idx < spec->pcm_used; pcm_idx++) { if (spec->pcm_rec[pcm_idx].jack == NULL) continue; - if (spec->dyn_pcm_assign) - snd_device_free(codec->card, - spec->pcm_rec[pcm_idx].jack); - else - spec->pcm_rec[pcm_idx].jack = NULL; + snd_device_free(codec->card, spec->pcm_rec[pcm_idx].jack); } generic_spec_free(codec); @@ -3033,7 +2948,6 @@ static int intel_hsw_common_init(struct hda_codec *codec, hda_nid_t vendor_nid, return err; spec = codec->spec; codec->dp_mst = true; - spec->dyn_pcm_assign = true; spec->vendor_nid = vendor_nid; spec->port_map = port_map; spec->port_num = port_num; @@ -3097,17 +3011,9 @@ static int patch_i915_tgl_hdmi(struct hda_codec *codec) * the index indicate the port number. */ static const int map[] = {0x4, 0x6, 0x8, 0xa, 0xb, 0xc, 0xd, 0xe, 0xf}; - int ret; - - ret = intel_hsw_common_init(codec, 0x02, map, ARRAY_SIZE(map), 4, - enable_silent_stream); - if (!ret) { - struct hdmi_spec *spec = codec->spec; - spec->dyn_pcm_no_legacy = true; - } - - return ret; + return intel_hsw_common_init(codec, 0x02, map, ARRAY_SIZE(map), 4, + enable_silent_stream); } static int patch_i915_adlp_hdmi(struct hda_codec *codec) @@ -3746,7 +3652,6 @@ static int patch_nvhdmi(struct hda_codec *codec) codec->dp_mst = true; spec = codec->spec; - spec->dyn_pcm_assign = true; err = hdmi_parse_codec(codec); if (err < 0) { @@ -4022,10 +3927,8 @@ static int patch_tegra234_hdmi(struct hda_codec *codec) return err; codec->dp_mst = true; - codec->mst_no_extra_pcms = true; spec = codec->spec; spec->dyn_pin_out = true; - spec->dyn_pcm_assign = true; spec->hdmi_intr_trig_ctrl = true; return tegra_hdmi_init(codec); diff --git a/sound/soc/codecs/hda.c b/sound/soc/codecs/hda.c index ad20a3dff9b7..61e8e9be6b8d 100644 --- a/sound/soc/codecs/hda.c +++ b/sound/soc/codecs/hda.c @@ -224,9 +224,6 @@ static int hda_codec_probe(struct snd_soc_component *component) goto err; } - /* configure codec for 1:1 PCM:DAI mapping */ - codec->mst_no_extra_pcms = 1; - ret = snd_hda_codec_parse_pcms(codec); if (ret < 0) { dev_err(&hdev->dev, "unable to map pcms to dai %d\n", ret); diff --git a/sound/soc/codecs/hdac_hda.c b/sound/soc/codecs/hdac_hda.c index 8debcee59224..7876bdd558a7 100644 --- a/sound/soc/codecs/hdac_hda.c +++ b/sound/soc/codecs/hdac_hda.c @@ -461,9 +461,6 @@ static int hdac_hda_codec_probe(struct snd_soc_component *component) dev_dbg(&hdev->dev, "no patch file found\n"); } - /* configure codec for 1:1 PCM:DAI mapping */ - hcodec->mst_no_extra_pcms = 1; - ret = snd_hda_codec_parse_pcms(hcodec); if (ret < 0) { dev_err(&hdev->dev, "unable to map pcms to dai %d\n", ret); -- 2.35.3

5 6

[PATCH 0/9] ALSA: hda: Codec-reload bug fixes and cleanups
by Cezary Rojewski 17 Jan '23

17 Jan '23

Total of 6 fixes and 3 cleanups - cleanups are last. All of the fixes address problems that present themselves in situation when user engages in codec driver reload. Second condition to reproduce is two-step initialization of HDAudio codec - this is the case only for ASoC HDAudio bus driver as snd_hda_intel calls only compound function snd_hda_codec_new(). Once these conditions are met, several reload/unload scenarios end with null-ptr-deref and page faults. Goal of the series is to allow codec/bus driver reloading without any errors. Amadeusz Sławiński (2): ALSA: hda: Reset all SIE bits in INTCTL ALSA: hda: Remove unused macro definition Cezary Rojewski (7): ALSA: hda: Do not unset preset when cleaning up codec ALSA: hda: Fix null-ptr-deref when i915 fails and hdmi is denylisted ALSA: hda: Make device usage_count consistent across subsequent probing ALSA: hda: Fix put_device() inconsistency in error path ALSA: hda: Skip event processing for unregistered codecs ALSA: hda: Fix page fault in snd_hda_codec_shutdown() ALSA: hda/realtek: Remove redundant init_hook() in alc_default_init() include/sound/hda_codec.h | 1 - include/sound/hdaudio.h | 1 + sound/hda/ext/hdac_ext_controller.c | 7 --- sound/hda/hdac_bus.c | 2 +- sound/hda/hdac_controller.c | 7 +-- sound/pci/hda/hda_bind.c | 7 +++ sound/pci/hda/hda_codec.c | 83 +++++++++++++++-------------- sound/pci/hda/patch_realtek.c | 3 -- sound/soc/codecs/hda.c | 4 +- 9 files changed, 56 insertions(+), 59 deletions(-) -- 2.25.1

3 26

[PATCH] soundwire: cadence: remove unused sdw_cdns_master_ops declaration
by Gaosheng Cui 09 Jan '23

09 Jan '23

sdw_cdns_master_ops has been removed since commit c91605f48938 ("soundwire: Remove cdns_master_ops"), so remove it. Signed-off-by: Gaosheng Cui <cuigaosheng1(a)huawei.com> --- drivers/soundwire/cadence_master.h | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/soundwire/cadence_master.h b/drivers/soundwire/cadence_master.h index ca9e805bab88..273eca3cb0b7 100644 --- a/drivers/soundwire/cadence_master.h +++ b/drivers/soundwire/cadence_master.h @@ -142,7 +142,6 @@ struct sdw_cdns { /* Exported symbols */ int sdw_cdns_probe(struct sdw_cdns *cdns); -extern struct sdw_master_ops sdw_cdns_master_ops; irqreturn_t sdw_cdns_irq(int irq, void *dev_id); irqreturn_t sdw_cdns_thread(int irq, void *dev_id); -- 2.25.1

2 1

Regression playing 24bit/96kHz audio on USB audio interface between 5.10.94 and 5.15.21
by Ruud van Asseldonk 02 Jan '23

02 Jan '23

Hi, I have a program that configures a Behringer UMC404HD 192k USB audio interface for playback as follows (pseudocode): snd_pcm_hw_params_set_channels(pcm, hwp, 2); snd_pcm_hw_params_set_format(pcm, hwp, SND_PCM_FORMAT_S24_3LE); snd_pcm_hw_params_set_access(pcm, hwp, SND_PCM_ACCESS_MMAP_INTERLEAVED); snd_pcm_hw_params_set_rate(pcm, hwp, val=96000, dir=0); snd_pcm_hw_params_set_period_size_near(pcm, hwp, val=513, dir=0); // If I confirm at this point with snd_pcm_hw_params_get_period_size, // I get back 513. snd_pcm_hw_params_set_buffer_size_near(pcm, hwp, val=2052); snd_pcm_hw_params(pcm, hwp); // If I confirm with snd_pcm_hw_params_get_buffer_size, // I get back 2052. On Linux 5.10.94 (specifically Arch Linux ARM package linux-rpi-5.10.94-1), this succeeds, and I can play back audio just fine. On 5.15.21 (specifically linux-rpi-5.15.21-3), all the calls succeed apart from the last one, which returns EINVAL. (My actual program is written in Rust and uses a Rust wrapper library for libasound, https://docs.rs/alsa/0.6.0/alsa/, but the calls should be the ones listed.) I confirmed with snd_pcm_hw_params_test_format that the S24_3LE format is supported. On both kernels it is successful. I confirmed with snd_pcm_hw_params_test_rate that 96 kHz is supported. On both kernels it is successful. There are differences though. When I query these: snd_pcm_hw_params_get_period_size_min snd_pcm_hw_params_get_period_size_max snd_pcm_hw_params_get_buffer_size_min snd_pcm_hw_params_get_buffer_size_max Then on 5.10.94 (the good version), I get: period size min/max: 12/32768, buffer size min/max: 24/65536 But on 5.15.21 (the bad version), I get: period size min/max: 13/71332, buffer size min/max: 26/142663 Also, after I set the period size to 513, if I then query the buffer size min/max, on 5.10.94 I get: buffer size min/max: 1026/65536 But on 5.15.21 I get: buffer size min/max: 1027/142663 In lsmod, snd_usb_audio shows up, and from lsusb -v, the UMC404HD appears to be a standard USB audio interface. The lsusb output is identical on both kernels. Please let me know if there is anything I can do to help further diagnose the issue, or if I should report this elsewhere. Kind regards, Ruud van Asseldonk

5 10

[PATCH 0/4] Make QMI message rules const
by Jeff Johnson 07 Dec '22

07 Dec '22

Change ff6d365898d ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const. So now update the definitions in the various client to take advantage of this. Patches for ath10k and ath11k were perviously sent separately. This series depends upon: https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git/commit/?h=fo… This is in the for-next banch of: git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git Hence this series is also based upon that tree/branch. Jeff Johnson (4): net: ipa: Make QMI message rules const remoteproc: sysmon: Make QMI message rules const slimbus: qcom-ngd-ctrl: Make QMI message rules const soc: qcom: pdr: Make QMI message rules const drivers/net/ipa/ipa_qmi_msg.c | 20 ++++++++++---------- drivers/net/ipa/ipa_qmi_msg.h | 20 ++++++++++---------- drivers/remoteproc/qcom_sysmon.c | 8 ++++---- drivers/slimbus/qcom-ngd-ctrl.c | 8 ++++---- drivers/soc/qcom/pdr_internal.h | 20 ++++++++++---------- 5 files changed, 38 insertions(+), 38 deletions(-) -- 2.37.0

4 17