August 2022 - Alsa-devel - mailman.alsa-project.org

[PATCH v2] dt-bindings: sound: tlv320aic3x: Convert to dtschema
by Jai Luthra 04 Aug '22

04 Aug '22

Convert bindings for TI's TLV320AIC3x audio codecs to dtschema. Signed-off-by: Jai Luthra <j-luthra(a)ti.com> --- .../bindings/sound/ti,tlv320aic3x.yaml | 158 ++++++++++++++++++ .../devicetree/bindings/sound/tlv320aic3x.txt | 97 ----------- 2 files changed, 158 insertions(+), 97 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml delete mode 100644 Documentation/devicetree/bindings/sound/tlv320aic3x.txt diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml new file mode 100644 index 000000000000..f0ed856162ea --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ti,tlv320aic3x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TLV320AIC3x Codec + +description: | + TLV320AIC3x are a series of low-power stereo audio codecs with stereo + headphone amplifier, as well as multiple inputs and outputs programmable in + single-ended or fully differential configurations. + + The serial control bus supports SPI or I2C protocols, while the serial audio + data bus is programmable for I2S, left/right-justified, DSP, or TDM modes. + + The following pins can be referred in the sound node's audio routing property: + + CODEC output pins: + LLOUT + RLOUT + MONO_LOUT + HPLOUT + HPROUT + HPLCOM + HPRCOM + + CODEC input pins for TLV320AIC3104: + MIC2L + MIC2R + LINE1L + LINE1R + + CODEC input pins for other compatible codecs: + MIC3L + MIC3R + LINE1L + LINE2L + LINE1R + LINE2R + +maintainers: + - Jai Luthra <j-luthra(a)ti.com> + +properties: + compatible: + enum: + - ti,tlv320aic3x + - ti,tlv320aic33 + - ti,tlv320aic3007 + - ti,tlv320aic3106 + - ti,tlv320aic3104 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: + GPIO specification for the active low RESET input. + + gpio-reset: + maxItems: 1 + description: + Deprecated, please use reset-gpios instead. + deprecated: true + + ai3x-gpio-func: + description: AIC3X_GPIO1 & AIC3X_GPIO2 Functionality + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + + ai3x-micbias-vg: + description: MicBias required voltage. If node is omitted then MicBias is powered down. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - const: 1 + description: MICBIAS output is powered to 2.0V. + - const: 2 + description: MICBIAS output is powered to 2.5V. + - const: 3 + description: MICBIAS output is connected to AVDD. + + ai3x-ocmv: + description: Output Common-Mode Voltage selection. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - const: 0 + description: 1.35V + - const: 1 + description: 1.5V + - const: 2 + description: 1.65V + - const: 3 + description: 1.8V + + AVDD-supply: + description: Analog DAC voltage. + + IOVDD-supply: + description: I/O voltage. + + DRVDD-supply: + description: ADC analog and output driver voltage. + + DVDD-supply: + description: Digital core voltage. + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tlv320aic3x_i2c: tlv320aic3x@1b { + compatible = "ti,tlv320aic3x"; + reg = <0x1b>; + + reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + + AVDD-supply = <&regulator>; + IOVDD-supply = <&regulator>; + DRVDD-supply = <&regulator>; + DVDD-supply = <&regulator>; + }; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + tlv320aic3x_spi: codec@0 { + compatible = "ti,tlv320aic3x"; + reg = <0>; /* CS number */ + #sound-dai-cells = <0>; + + AVDD-supply = <&regulator>; + IOVDD-supply = <&regulator>; + DRVDD-supply = <&regulator>; + DVDD-supply = <&regulator>; + ai3x-ocmv = <0>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt deleted file mode 100644 index 20931a63fd64..000000000000 --- a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt +++ /dev/null @@ -1,97 +0,0 @@ -Texas Instruments - tlv320aic3x Codec module - -The tlv320aic3x serial control bus communicates through both I2C and SPI bus protocols - -Required properties: - -- compatible - "string" - One of: - "ti,tlv320aic3x" - Generic TLV320AIC3x device - "ti,tlv320aic33" - TLV320AIC33 - "ti,tlv320aic3007" - TLV320AIC3007 - "ti,tlv320aic3106" - TLV320AIC3106 - "ti,tlv320aic3104" - TLV320AIC3104 - - -- reg - <int> - I2C slave address - - -Optional properties: - -- reset-gpios - GPIO specification for the active low RESET input. -- ai3x-gpio-func - <array of 2 int> - AIC3X_GPIO1 & AIC3X_GPIO2 Functionality - - Not supported on tlv320aic3104 -- ai3x-micbias-vg - MicBias Voltage required. - 1 - MICBIAS output is powered to 2.0V, - 2 - MICBIAS output is powered to 2.5V, - 3 - MICBIAS output is connected to AVDD, - If this node is not mentioned or if the value is incorrect, then MicBias - is powered down. -- ai3x-ocmv - Output Common-Mode Voltage selection: - 0 - 1.35V, - 1 - 1.5V, - 2 - 1.65V, - 3 - 1.8V -- AVDD-supply, IOVDD-supply, DRVDD-supply, DVDD-supply : power supplies for the - device as covered in Documentation/devicetree/bindings/regulator/regulator.txt - -Deprecated properties: - -- gpio-reset - gpio pin number used for codec reset - -CODEC output pins: - * LLOUT - * RLOUT - * MONO_LOUT - * HPLOUT - * HPROUT - * HPLCOM - * HPRCOM - -CODEC input pins for TLV320AIC3104: - * MIC2L - * MIC2R - * LINE1L - * LINE1R - -CODEC input pins for other compatible codecs: - * MIC3L - * MIC3R - * LINE1L - * LINE2L - * LINE1R - * LINE2R - -The pins can be used in referring sound node's audio-routing property. - -I2C example: - -#include <dt-bindings/gpio/gpio.h> - -tlv320aic3x: tlv320aic3x@1b { - compatible = "ti,tlv320aic3x"; - reg = <0x1b>; - - reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; - - AVDD-supply = <&regulator>; - IOVDD-supply = <&regulator>; - DRVDD-supply = <&regulator>; - DVDD-supply = <&regulator>; -}; - -SPI example: - -spi0: spi@f0000000 { - tlv320aic3x: codec@0 { - compatible = "ti,tlv320aic3x"; - reg = <0>; /* CS number */ - #sound-dai-cells = <0>; - spi-max-frequency = <1000000>; - - AVDD-supply = <&regulator>; - IOVDD-supply = <&regulator>; - DRVDD-supply = <&regulator>; - DVDD-supply = <&regulator>; - ai3x-ocmv = <0>; - }; -}; -- 2.17.1

3 2

[PATCH v2 0/3] DT binding for sample format conversion
by Sameer Pujar 04 Aug '22

04 Aug '22

DT binding properties are available to fixup rate and channel parameters of a DAI. This series extends this to sample format conversion as well. With this now DAI PCM parameters (channels, sample rate and sample format) can be fixed up as necessary in an audio path. Changelog: ========== v1->v2: ------- * Move DAI params properties to a new schema and re-use this for simple-card and audio-graph-card. * Use string type for DAI format binding as suggested by Krzysztof. Sameer Pujar (3): ASoC: dt-bindings: Add schema for common DAI params ASoC: dt-bindings: Add sample format conversion ASoC: simple-card-utils: Fixup DAI sample format .../bindings/sound/audio-graph-port.yaml | 17 +++++----- .../devicetree/bindings/sound/audio-graph.yaml | 9 ++--- .../devicetree/bindings/sound/dai-params.yaml | 38 ++++++++++++++++++++++ .../devicetree/bindings/sound/simple-card.yaml | 20 +++++------- include/sound/simple_card_utils.h | 1 + sound/soc/generic/simple-card-utils.c | 34 +++++++++++++++++++ 6 files changed, 95 insertions(+), 24 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/dai-params.yaml -- 2.7.4

2 9

[PATCH v4] ASoC: amd: acp: Initialize list to store acp_stream during pcm_open
by Venkata Prasad Potturu 04 Aug '22

04 Aug '22

From: Ajit Kumar Pandey <AjitKumar.Pandey(a)amd.com> We are currently allocating acp_stream during pcm_open and saving it in static array corresponds to array index calculated based on cpu dai->driver id. This approach will fail if we have single dai linked to multiple pcm device as we will have same dai->driver id or array index for multiple pcm open. Initialize new linked list stream_list to store opened pcm stream info dynamically. Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey(a)amd.com> Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu(a)amd.com> Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda(a)amd.com> --- Changes since v3: -- Modify to spin_lock() in irq handler and spin_lock_irq() in dma open and close functions instead of spin_lock_irqsave(). Changes since v2: -- Add locking mechanism in irq handler, linked list updatation and deletion. Changes since v1: -- Fix compile error and remove unused variable. sound/soc/amd/acp/acp-platform.c | 40 +++++++++++++++----------------- sound/soc/amd/acp/amd.h | 4 +++- 2 files changed, 22 insertions(+), 22 deletions(-) diff --git a/sound/soc/amd/acp/acp-platform.c b/sound/soc/amd/acp/acp-platform.c index f561d39b33e2..beee53aedeaf 100644 --- a/sound/soc/amd/acp/acp-platform.c +++ b/sound/soc/amd/acp/acp-platform.c @@ -94,7 +94,7 @@ static irqreturn_t i2s_irq_handler(int irq, void *data) struct acp_resource *rsrc = adata->rsrc; struct acp_stream *stream; u16 i2s_flag = 0; - u32 ext_intr_stat, ext_intr_stat1, i; + u32 ext_intr_stat, ext_intr_stat1; if (!adata) return IRQ_NONE; @@ -104,14 +104,13 @@ static irqreturn_t i2s_irq_handler(int irq, void *data) ext_intr_stat = readl(ACP_EXTERNAL_INTR_STAT(adata, rsrc->irqp_used)); - for (i = 0; i < ACP_MAX_STREAM; i++) { - stream = adata->stream[i]; + spin_lock(&adata->acp_lock); + list_for_each_entry(stream, &adata->stream_list, list) { if (stream && (ext_intr_stat & stream->irq_bit)) { writel(stream->irq_bit, ACP_EXTERNAL_INTR_STAT(adata, rsrc->irqp_used)); snd_pcm_period_elapsed(stream->substream); i2s_flag = 1; - break; } if (adata->rsrc->no_of_ctrls == 2) { if (stream && (ext_intr_stat1 & stream->irq_bit)) { @@ -119,10 +118,10 @@ static irqreturn_t i2s_irq_handler(int irq, void *data) (rsrc->irqp_used - 1))); snd_pcm_period_elapsed(stream->substream); i2s_flag = 1; - break; } } } + spin_unlock(&adata->acp_lock); if (i2s_flag) return IRQ_HANDLED; @@ -146,9 +145,8 @@ static void config_pte_for_stream(struct acp_dev_data *adata, struct acp_stream writel(0x01, adata->acp_base + ACPAXI2AXI_ATU_CTRL); } -static void config_acp_dma(struct acp_dev_data *adata, int cpu_id, int size) +static void config_acp_dma(struct acp_dev_data *adata, struct acp_stream *stream, int size) { - struct acp_stream *stream = adata->stream[cpu_id]; struct snd_pcm_substream *substream = stream->substream; struct acp_resource *rsrc = adata->rsrc; dma_addr_t addr = substream->dma_buffer.addr; @@ -174,13 +172,10 @@ static void config_acp_dma(struct acp_dev_data *adata, int cpu_id, int size) static int acp_dma_open(struct snd_soc_component *component, struct snd_pcm_substream *substream) { - struct snd_soc_pcm_runtime *soc_runtime = asoc_substream_to_rtd(substream); - struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(soc_runtime, 0); struct snd_pcm_runtime *runtime = substream->runtime; struct device *dev = component->dev; struct acp_dev_data *adata = dev_get_drvdata(dev); struct acp_stream *stream; - int stream_id = cpu_dai->driver->id * 2 + substream->stream; int ret; stream = kzalloc(sizeof(*stream), GFP_KERNEL); @@ -188,7 +183,10 @@ static int acp_dma_open(struct snd_soc_component *component, struct snd_pcm_subs return -ENOMEM; stream->substream = substream; - adata->stream[stream_id] = stream; + + spin_lock_irq(&adata->acp_lock); + list_add_tail(&stream->list, &adata->stream_list); + spin_unlock_irq(&adata->acp_lock); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) runtime->hw = acp_pcm_hardware_playback; @@ -212,16 +210,13 @@ static int acp_dma_hw_params(struct snd_soc_component *component, struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { - struct snd_soc_pcm_runtime *soc_runtime = asoc_substream_to_rtd(substream); struct acp_dev_data *adata = snd_soc_component_get_drvdata(component); - struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(soc_runtime, 0); struct acp_stream *stream = substream->runtime->private_data; - int stream_id = cpu_dai->driver->id * 2 + substream->stream; u64 size = params_buffer_bytes(params); /* Configure ACP DMA block with params */ config_pte_for_stream(adata, stream); - config_acp_dma(adata, stream_id, size); + config_acp_dma(adata, stream, size); return 0; } @@ -261,16 +256,15 @@ static int acp_dma_new(struct snd_soc_component *component, static int acp_dma_close(struct snd_soc_component *component, struct snd_pcm_substream *substream) { - struct snd_soc_pcm_runtime *soc_runtime = asoc_substream_to_rtd(substream); - struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(soc_runtime, 0); struct device *dev = component->dev; struct acp_dev_data *adata = dev_get_drvdata(dev); - struct acp_stream *stream; - int stream_id = cpu_dai->driver->id * 2 + substream->stream; + struct acp_stream *stream = substream->runtime->private_data; - stream = adata->stream[stream_id]; + /* Remove entry from list */ + spin_lock_irq(&adata->acp_lock); + list_del(&stream->list); + spin_unlock_irq(&adata->acp_lock); kfree(stream); - adata->stream[stream_id] = NULL; return 0; } @@ -305,6 +299,10 @@ int acp_platform_register(struct device *dev) dev_err(dev, "Fail to register acp i2s component\n"); return status; } + + INIT_LIST_HEAD(&adata->stream_list); + spin_lock_init(&adata->acp_lock); + return 0; } EXPORT_SYMBOL_NS_GPL(acp_platform_register, SND_SOC_ACP_COMMON); diff --git a/sound/soc/amd/acp/amd.h b/sound/soc/amd/acp/amd.h index 60a7c95f134f..be8bb8247c4e 100644 --- a/sound/soc/amd/acp/amd.h +++ b/sound/soc/amd/acp/amd.h @@ -91,6 +91,7 @@ struct acp_chip_info { }; struct acp_stream { + struct list_head list; struct snd_pcm_substream *substream; int irq_bit; int dai_id; @@ -123,7 +124,8 @@ struct acp_dev_data { struct snd_soc_dai_driver *dai_driver; int num_dai; - struct acp_stream *stream[ACP_MAX_STREAM]; + struct list_head stream_list; + spinlock_t acp_lock; struct snd_soc_acpi_mach *machines; struct platform_device *mach_dev; -- 2.25.1

1 0

USB-Audio: Add profile for MSI MEG Z690I Unify
by GitHub pull_request - opened 04 Aug '22

04 Aug '22

alsa-project/alsa-ucm-conf pull request #196 was opened from 13r0ck: This is tested and works, though I am not a fan of my `Needle` and `Haystack` solution here, but before also making a PR to alsa-utils I wanted direction. Would it be better to add a `Type Bool` condition, or a `skip` modifier to `SectionDevice`? I prefer the later, because it skips the `If {} Condition {} true {}` lines, but I would like an alsa maintainer's opinion. Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/196 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/196.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH] ALSA: hda/realtek: Add quirk for HP Spectre x360 15-eb0xxx
by Ivan Hasenkampf 03 Aug '22

03 Aug '22

Fixes speaker output on HP Spectre x360 15-eb0xxx Signed-off-by: Ivan Hasenkampf <ivan.hasenkampf(a)gmail.com> --- sound/pci/hda/patch_realtek.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 2f55bc43bfa9..fe43e5807b8c 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9072,6 +9072,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x87f7, "HP Spectre x360 14", ALC245_FIXUP_HP_X360_AMP), SND_PCI_QUIRK(0x103c, 0x8805, "HP ProBook 650 G8 Notebook PC", ALC236_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x880d, "HP EliteBook 830 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED), + SND_PCI_QUIRK(0x103c, 0x86e7, "HP Spectre x360 15-eb0xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1), + SND_PCI_QUIRK(0x103c, 0x86e8, "HP Spectre x360 15-eb0xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1), SND_PCI_QUIRK(0x103c, 0x8811, "HP Spectre x360 15-eb1xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1), SND_PCI_QUIRK(0x103c, 0x8812, "HP Spectre x360 15-eb1xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1), SND_PCI_QUIRK(0x103c, 0x8846, "HP EliteBook 850 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED), -- 2.37.0

2 1

[PATCH] ALSA: hda/realtek: Add quirk for HP Spectre x360 15-eb0xxx
by Ivan Hasenkampf 03 Aug '22

03 Aug '22

Fixes speaker output on HP Spectre x360 15-eb0xxx Signed-off-by: Ivan Hasenkampf <ivan.hasenkampf(a)gmail.com> --- sound/pci/hda/patch_realtek.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 2f55bc43bfa9..fe43e5807b8c 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9072,6 +9072,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x87f7, "HP Spectre x360 14", ALC245_FIXUP_HP_X360_AMP), SND_PCI_QUIRK(0x103c, 0x8805, "HP ProBook 650 G8 Notebook PC", ALC236_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x880d, "HP EliteBook 830 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED), + SND_PCI_QUIRK(0x103c, 0x86e7, "HP Spectre x360 15-eb0xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1), + SND_PCI_QUIRK(0x103c, 0x86e8, "HP Spectre x360 15-eb0xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1), SND_PCI_QUIRK(0x103c, 0x8811, "HP Spectre x360 15-eb1xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1), SND_PCI_QUIRK(0x103c, 0x8812, "HP Spectre x360 15-eb1xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1), SND_PCI_QUIRK(0x103c, 0x8846, "HP EliteBook 850 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED), -- 2.37.0

1 0

[PATCH] dt-bindings: sound: tlv320aic3x: Convert to dtschema
by Jai Luthra 03 Aug '22

03 Aug '22

Convert bindings for TI's TLV320AIC3x audio codecs to dtschema. Signed-off-by: Jai Luthra <j-luthra(a)ti.com> --- .../devicetree/bindings/sound/tlv320aic3x.txt | 97 ------------ .../bindings/sound/tlv320aic3x.yaml | 145 ++++++++++++++++++ 2 files changed, 145 insertions(+), 97 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/tlv320aic3x.txt create mode 100644 Documentation/devicetree/bindings/sound/tlv320aic3x.yaml diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt deleted file mode 100644 index 20931a63fd64..000000000000 --- a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt +++ /dev/null @@ -1,97 +0,0 @@ -Texas Instruments - tlv320aic3x Codec module - -The tlv320aic3x serial control bus communicates through both I2C and SPI bus protocols - -Required properties: - -- compatible - "string" - One of: - "ti,tlv320aic3x" - Generic TLV320AIC3x device - "ti,tlv320aic33" - TLV320AIC33 - "ti,tlv320aic3007" - TLV320AIC3007 - "ti,tlv320aic3106" - TLV320AIC3106 - "ti,tlv320aic3104" - TLV320AIC3104 - - -- reg - <int> - I2C slave address - - -Optional properties: - -- reset-gpios - GPIO specification for the active low RESET input. -- ai3x-gpio-func - <array of 2 int> - AIC3X_GPIO1 & AIC3X_GPIO2 Functionality - - Not supported on tlv320aic3104 -- ai3x-micbias-vg - MicBias Voltage required. - 1 - MICBIAS output is powered to 2.0V, - 2 - MICBIAS output is powered to 2.5V, - 3 - MICBIAS output is connected to AVDD, - If this node is not mentioned or if the value is incorrect, then MicBias - is powered down. -- ai3x-ocmv - Output Common-Mode Voltage selection: - 0 - 1.35V, - 1 - 1.5V, - 2 - 1.65V, - 3 - 1.8V -- AVDD-supply, IOVDD-supply, DRVDD-supply, DVDD-supply : power supplies for the - device as covered in Documentation/devicetree/bindings/regulator/regulator.txt - -Deprecated properties: - -- gpio-reset - gpio pin number used for codec reset - -CODEC output pins: - * LLOUT - * RLOUT - * MONO_LOUT - * HPLOUT - * HPROUT - * HPLCOM - * HPRCOM - -CODEC input pins for TLV320AIC3104: - * MIC2L - * MIC2R - * LINE1L - * LINE1R - -CODEC input pins for other compatible codecs: - * MIC3L - * MIC3R - * LINE1L - * LINE2L - * LINE1R - * LINE2R - -The pins can be used in referring sound node's audio-routing property. - -I2C example: - -#include <dt-bindings/gpio/gpio.h> - -tlv320aic3x: tlv320aic3x@1b { - compatible = "ti,tlv320aic3x"; - reg = <0x1b>; - - reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; - - AVDD-supply = <&regulator>; - IOVDD-supply = <&regulator>; - DRVDD-supply = <&regulator>; - DVDD-supply = <&regulator>; -}; - -SPI example: - -spi0: spi@f0000000 { - tlv320aic3x: codec@0 { - compatible = "ti,tlv320aic3x"; - reg = <0>; /* CS number */ - #sound-dai-cells = <0>; - spi-max-frequency = <1000000>; - - AVDD-supply = <&regulator>; - IOVDD-supply = <&regulator>; - DRVDD-supply = <&regulator>; - DVDD-supply = <&regulator>; - ai3x-ocmv = <0>; - }; -}; diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.yaml b/Documentation/devicetree/bindings/sound/tlv320aic3x.yaml new file mode 100644 index 000000000000..6efb1d459543 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tlv320aic3x.yaml @@ -0,0 +1,145 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/tlv320aic3x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TLV320AIC3x Codec Device Tree Bindings + +maintainers: + - Jai Luthra <j-luthra(a)ti.com> + +properties: + compatible: + enum: + - ti,tlv320aic3x + - ti,tlv320aic33 + - ti,tlv320aic3007 + - ti,tlv320aic3106 + - ti,tlv320aic3104 + + reg: + maxItems: 1 + description: i2c slave address + + reset-gpios: + maxItems: 1 + description: + GPIO specification for the active low RESET input. + + ai3x-gpio-func: + description: AIC3X_GPIO1 & AIC3X_GPIO2 Functionality + $ref: /schemas/types.yaml#/definitions/uint32 + minItems: 3 + maxItems: 3 + + ai3x-micbias-vg: + description: MicBias required voltage. If node is omitted then MicBias is powered down. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - const: 1 + description: MICBIAS output is powered to 2.0V. + - const: 2 + description: MICBIAS output is powered to 2.5V. + - const: 3 + description: MICBIAS output is connected to AVDD. + + ai3x-ocmv: + description: Output Common-Mode Voltage selection. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - const: 0 + description: 1.35V + - const: 1 + description: 1.5V + - const: 2 + description: 1.65V + - const: 3 + description: 1.8V + + AVDD-supply: + description: Analog DAC voltage. + + IOVDD-supply: + description: I/O voltage. + + DRVDD-supply: + description: ADC analog and output driver voltage. + + DVDD-supply: + description: Digital core voltage. + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + +#The pins can be used in referring sound node's audio-routing property. + +#CODEC output pins: + # LLOUT + # RLOUT + # MONO_LOUT + # HPLOUT + # HPROUT + # HPLCOM + # HPRCOM + +#CODEC input pins for TLV320AIC3104: + # MIC2L + # MIC2R + # LINE1L + # LINE1R + +#CODEC input pins for other compatible codecs: + # MIC3L + # MIC3R + # LINE1L + # LINE2L + # LINE1R + # LINE2R + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tlv320aic3x_i2c: tlv320aic3x@1b { + compatible = "ti,tlv320aic3x"; + reg = <0x1b>; + + reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + + AVDD-supply = <&regulator>; + IOVDD-supply = <&regulator>; + DRVDD-supply = <&regulator>; + DVDD-supply = <&regulator>; + }; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + tlv320aic3x_spi: codec@0 { + compatible = "ti,tlv320aic3x"; + reg = <0>; /* CS number */ + #sound-dai-cells = <0>; + + AVDD-supply = <&regulator>; + IOVDD-supply = <&regulator>; + DRVDD-supply = <&regulator>; + DVDD-supply = <&regulator>; + ai3x-ocmv = <0>; + }; + }; + +... -- 2.17.1

3 3

[PATCH] soc: sof: fix clang -Wformat warnings
by Justin Stitt 03 Aug '22

03 Aug '22

When building with Clang we encounter these warnings: | sound/soc/sof/ipc3-topology.c:2343:4: error: format specifies type | 'unsigned char' but the argument has type 'int' [-Werror,-Wformat] | SOF_ABI_MAJOR, SOF_ABI_MINOR, SOF_ABI_PATCH); | ^~~~~~~~~~~~~~~^~~~~~~~~~~~~~~^~~~~~~~~~~~~ Use correct format specifier `%d` since args are of type int. Link: https://github.com/ClangBuiltLinux/linux/issues/378 Reported-by: Nathan Chancellor <nathan(a)kernel.org> Suggested-by: Nathan Chancellor <nathan(a)kernel.org> Signed-off-by: Justin Stitt <justinstitt(a)google.com> --- Reported by Nathan here: https://lore.kernel.org/all/YtmrCJjQrSbv8Aj1@dev-arch.thelio-3990X/ sound/soc/sof/ipc3-topology.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/sof/ipc3-topology.c b/sound/soc/sof/ipc3-topology.c index b2cc046b9f60..65923e7a5976 100644 --- a/sound/soc/sof/ipc3-topology.c +++ b/sound/soc/sof/ipc3-topology.c @@ -2338,7 +2338,7 @@ static int sof_ipc3_parse_manifest(struct snd_soc_component *scomp, int index, } dev_info(scomp->dev, - "Topology: ABI %d:%d:%d Kernel ABI %hhu:%hhu:%hhu\n", + "Topology: ABI %d:%d:%d Kernel ABI %d:%d:%d\n", man->priv.data[0], man->priv.data[1], man->priv.data[2], SOF_ABI_MAJOR, SOF_ABI_MINOR, SOF_ABI_PATCH); -- 2.37.1.359.gd136c6c3e2-goog

3 3

[PATCH] ASoC: amd: yc: Update DMI table entries for AMD platforms
by Syed Saba Kareem 02 Aug '22

02 Aug '22

From: syed sabakareem <Syed.SabaKareem(a)amd.com> Updated DMI entries 21EM, 21EN, 21J5 and 21J6 for AMD platforms P15v Gen 3 and P14s Gen 3. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216267 Signed-off-by: syed saba kareem <Syed.SabaKareem(a)amd.com> Reported-by: Pananchikkal Renjith <renjith.pananchikkal(a)amd.com> --- sound/soc/amd/yc/acp6x-mach.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c index ecfe7a790790..e0b24e1daef3 100644 --- a/sound/soc/amd/yc/acp6x-mach.c +++ b/sound/soc/amd/yc/acp6x-mach.c @@ -143,6 +143,34 @@ static const struct dmi_system_id yc_acp_quirk_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "21CL"), } }, + { + .driver_data = &acp6x_card, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "21EM"), + } + }, + { + .driver_data = &acp6x_card, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "21EN"), + } + }, + { + .driver_data = &acp6x_card, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "21J5"), + } + }, + { + .driver_data = &acp6x_card, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "21J6"), + } + }, {} }; -- 2.25.1

2 1

[PATCH v7 2/2] ASoC: sun50i-dmic: dt-bindings: add DT bindings for DMIC controller
by Ban Tao 02 Aug '22

02 Aug '22

DT binding documentation for this new ASoC driver. Signed-off-by: Ban Tao <fengzheng923(a)gmail.com> Reviewed-by: Rob Herring <robh(a)kernel.org> Reviewed-by: Maxime Ripard <maxime(a)cerno.tech> --- v1->v2: 1.Fix some build errors. v2->v3: 1.Fix some build errors. v3->v4: 1.None. v4->v5: 1.Add interrupt. 2.Keep clock and reset index. v5->v6: 1.None. v6->v7: 1.None. --- .../bindings/sound/allwinner,sun50i-h6-dmic.yaml | 79 ++++++++++++++++++++++ 1 file changed, 79 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml new file mode 100644 index 0000000..185d3e4 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/allwinner,sun50i-h6-dmic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner H6 DMIC Device Tree Bindings + +maintainers: + - Ban Tao <fengzheng923(a)gmail.com> + +properties: + "#sound-dai-cells": + const: 0 + + compatible: + const: allwinner,sun50i-h6-dmic + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + + clock-names: + items: + - const: bus + - const: mod + + dmas: + items: + - description: RX DMA Channel + + dma-names: + items: + - const: rx + + resets: + maxItems: 1 + +required: + - "#sound-dai-cells" + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + #include <dt-bindings/clock/sun50i-h6-ccu.h> + #include <dt-bindings/reset/sun50i-h6-ccu.h> + + dmic: dmic@5095000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun50i-h6-dmic"; + reg = <0x05095000 0x400>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DMIC>, <&ccu CLK_DMIC>; + clock-names = "bus", "mod"; + dmas = <&dma 7>; + dma-names = "rx"; + resets = <&ccu RST_BUS_DMIC>; + }; + +... \ No newline at end of file -- 2.7.4

3 2