June 2022 - Alsa-devel - mailman.alsa-project.org

[PATCH v2 0/3] ASoC: sun50i-codec-analog: Internal bias support
by Samuel Holland 08 Jul '22

08 Jul '22

This series adds support for enabling the codec's internal microphone bias, which is needed on at least some versions of the PinePhone. Changes in v2: - Move register update from component probe to device probe Arnaud Ferraris (2): ASoC: dt-bindings: sun50i-codec: Add binding for internal bias ASoC: sun50i-codec-analog: Add support for internal bias Samuel Holland (1): arm64: dts: allwinner: pinephone: Enable internal HMIC bias .../bindings/sound/allwinner,sun50i-a64-codec-analog.yaml | 5 +++++ .../arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts | 4 ++++ .../arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts | 4 ++++ sound/soc/sunxi/sun50i-codec-analog.c | 8 ++++++++ 4 files changed, 21 insertions(+) -- 2.35.1

3 10

[PATCH] ASoC: core: Exit all links before removing their components
by Cezary Rojewski 08 Jul '22

08 Jul '22

Flows leading to link->init() and link->exit() are not symmetric. Currently the relevant part of card probe sequence goes as: for_each_card_rtds(card, rtd) for_each_rtd_components(rtd, i, component) component->probe() for_each_card_rtds(card, rtd) for_each_rtd_dais(rtd, i, dai) dai->probe() for_each_card_rtds(card, rtd) rtd->init() On the other side, equivalent remove sequence goes as: for_each_card_rtds(card, rtd) for_each_rtd_dais(rtd, i, dai) dai->remove() for_each_card_rtds(card, rtd) for_each_rtd_components(rtd, i, component) component->remove() for_each_card_rtds(card, rtd) rtd->exit() what can lead to errors as link->exit() may still operate on resources owned by its components despite the probability of them being freed during the component->remove(). This change modifies the remove sequence to: for_each_card_rtds(card, rtd) rtd->exit() for_each_card_rtds(card, rtd) for_each_rtd_dais(rtd, i, dai) dai->remove() for_each_card_rtds(card, rtd) for_each_rtd_components(rtd, i, component) component->remove() so code found in link->exit() is safe to touch any component stuff as component->remove() has not been called yet. Signed-off-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> --- sound/soc/soc-core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 4a3fca50a536..638e781df3b0 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -935,9 +935,6 @@ void snd_soc_remove_pcm_runtime(struct snd_soc_card *card, { lockdep_assert_held(&client_mutex); - /* release machine specific resources */ - snd_soc_link_exit(rtd); - /* * Notify the machine driver for extra destruction */ @@ -1888,6 +1885,9 @@ static void soc_cleanup_card_resources(struct snd_soc_card *card) snd_soc_dapm_shutdown(card); + /* release machine specific resources */ + for_each_card_rtds(card, rtd) + snd_soc_link_exit(rtd); /* remove and free each DAI */ soc_remove_link_dais(card); soc_remove_link_components(card); -- 2.25.1

2 3

[PATCH 0/3] ADD legacy audio driver support for rembrandt
by V sujith kumar Reddy 07 Jul '22

07 Jul '22

Add Generic driver to support multiple platform, ADD HS control instance for Rembrandt platform. Add nau8825,max98560 and rt5682s,rt1019 combination support for legacy platform. V sujith kumar Reddy (3): ASoC: amd: acp: Remove rt1019_1 codec conf from machine driver ASoC: amd: acp: ACP code generic to support newer platforms ASoC: amd: acp: Add legacy audio driver support for Rembrandt platform sound/soc/amd/acp/Kconfig | 11 + sound/soc/amd/acp/Makefile | 2 + sound/soc/amd/acp/acp-i2s.c | 169 +++++++++++- sound/soc/amd/acp/acp-legacy-mach.c | 32 +++ sound/soc/amd/acp/acp-mach-common.c | 104 +++++-- sound/soc/amd/acp/acp-mach.h | 6 + sound/soc/amd/acp/acp-pci.c | 6 + sound/soc/amd/acp/acp-pdm.c | 8 +- sound/soc/amd/acp/acp-platform.c | 32 ++- sound/soc/amd/acp/acp-rembrandt.c | 397 +++++++++++++++++++++++++++ sound/soc/amd/acp/acp-renoir.c | 38 ++- sound/soc/amd/acp/amd.h | 86 +++++- sound/soc/amd/acp/chip_offset_byte.h | 40 ++- 13 files changed, 862 insertions(+), 69 deletions(-) create mode 100644 sound/soc/amd/acp/acp-rembrandt.c -- 2.25.1

3 5

[PATCH 1/5] ASoC: tegra: tegra20_das: Fold header file into only user
by Uwe Kleine-König 06 Jul '22

06 Jul '22

Since commit fcff5f99742e ("ASoC: tegra: remove unnecessary includes") the header file (which at the time was named tegra_das.h) there is only the actual driver that includes it. Just move the definitions into the driver, drop the exports and remove the completely unused function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig(a)pengutronix.de> --- sound/soc/tegra/tegra20_das.c | 110 +++++++++++++++++++++++-------- sound/soc/tegra/tegra20_das.h | 120 ---------------------------------- 2 files changed, 83 insertions(+), 147 deletions(-) delete mode 100644 sound/soc/tegra/tegra20_das.h diff --git a/sound/soc/tegra/tegra20_das.c b/sound/soc/tegra/tegra20_das.c index 69c651274c12..d2801130a986 100644 --- a/sound/soc/tegra/tegra20_das.c +++ b/sound/soc/tegra/tegra20_das.c @@ -13,10 +13,90 @@ #include <linux/regmap.h> #include <linux/slab.h> #include <sound/soc.h> -#include "tegra20_das.h" #define DRV_NAME "tegra20-das" +/* Register TEGRA20_DAS_DAP_CTRL_SEL */ +#define TEGRA20_DAS_DAP_CTRL_SEL 0x00 +#define TEGRA20_DAS_DAP_CTRL_SEL_COUNT 5 +#define TEGRA20_DAS_DAP_CTRL_SEL_STRIDE 4 +#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_MS_SEL_P 31 +#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_MS_SEL_S 1 +#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_SDATA1_TX_RX_P 30 +#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_SDATA1_TX_RX_S 1 +#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_SDATA2_TX_RX_P 29 +#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_SDATA2_TX_RX_S 1 +#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_CTRL_SEL_P 0 +#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_CTRL_SEL_S 5 + +/* Values for field TEGRA20_DAS_DAP_CTRL_SEL_DAP_CTRL_SEL */ +#define TEGRA20_DAS_DAP_SEL_DAC1 0 +#define TEGRA20_DAS_DAP_SEL_DAC2 1 +#define TEGRA20_DAS_DAP_SEL_DAC3 2 +#define TEGRA20_DAS_DAP_SEL_DAP1 16 +#define TEGRA20_DAS_DAP_SEL_DAP2 17 +#define TEGRA20_DAS_DAP_SEL_DAP3 18 +#define TEGRA20_DAS_DAP_SEL_DAP4 19 +#define TEGRA20_DAS_DAP_SEL_DAP5 20 + +/* Register TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL */ +#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL 0x40 +#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_COUNT 3 +#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_STRIDE 4 +#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_SDATA2_SEL_P 28 +#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_SDATA2_SEL_S 4 +#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_SDATA1_SEL_P 24 +#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_SDATA1_SEL_S 4 +#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_CLK_SEL_P 0 +#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_CLK_SEL_S 4 + +/* + * Values for: + * TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_SDATA2_SEL + * TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_SDATA1_SEL + * TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_CLK_SEL + */ +#define TEGRA20_DAS_DAC_SEL_DAP1 0 +#define TEGRA20_DAS_DAC_SEL_DAP2 1 +#define TEGRA20_DAS_DAC_SEL_DAP3 2 +#define TEGRA20_DAS_DAC_SEL_DAP4 3 +#define TEGRA20_DAS_DAC_SEL_DAP5 4 + +/* + * Names/IDs of the DACs/DAPs. + */ + +#define TEGRA20_DAS_DAP_ID_1 0 +#define TEGRA20_DAS_DAP_ID_2 1 +#define TEGRA20_DAS_DAP_ID_3 2 +#define TEGRA20_DAS_DAP_ID_4 3 +#define TEGRA20_DAS_DAP_ID_5 4 + +#define TEGRA20_DAS_DAC_ID_1 0 +#define TEGRA20_DAS_DAC_ID_2 1 +#define TEGRA20_DAS_DAC_ID_3 2 + +struct tegra20_das { + struct device *dev; + struct regmap *regmap; +}; + +/* + * Terminology: + * DAS: Digital audio switch (HW module controlled by this driver) + * DAP: Digital audio port (port/pins on Tegra device) + * DAC: Digital audio controller (e.g. I2S or AC97 controller elsewhere) + * + * The Tegra DAS is a mux/cross-bar which can connect each DAP to a specific + * DAC, or another DAP. When DAPs are connected, one must be the master and + * one the slave. Each DAC allows selection of a specific DAP for input, to + * cater for the case where N DAPs are connected to 1 DAC for broadcast + * output. + * + * This driver is dumb; no attempt is made to ensure that a valid routing + * configuration is programmed. + */ + static struct tegra20_das *das; static inline void tegra20_das_write(u32 reg, u32 val) @@ -32,7 +112,7 @@ static inline u32 tegra20_das_read(u32 reg) return val; } -int tegra20_das_connect_dap_to_dac(int dap, int dac) +static int tegra20_das_connect_dap_to_dac(int dap, int dac) { u32 addr; u32 reg; @@ -48,31 +128,8 @@ int tegra20_das_connect_dap_to_dac(int dap, int dac) return 0; } -EXPORT_SYMBOL_GPL(tegra20_das_connect_dap_to_dac); - -int tegra20_das_connect_dap_to_dap(int dap, int otherdap, int master, - int sdata1rx, int sdata2rx) -{ - u32 addr; - u32 reg; - - if (!das) - return -ENODEV; - - addr = TEGRA20_DAS_DAP_CTRL_SEL + - (dap * TEGRA20_DAS_DAP_CTRL_SEL_STRIDE); - reg = (otherdap << TEGRA20_DAS_DAP_CTRL_SEL_DAP_CTRL_SEL_P) | - (!!sdata2rx << TEGRA20_DAS_DAP_CTRL_SEL_DAP_SDATA2_TX_RX_P) | - (!!sdata1rx << TEGRA20_DAS_DAP_CTRL_SEL_DAP_SDATA1_TX_RX_P) | - (!!master << TEGRA20_DAS_DAP_CTRL_SEL_DAP_MS_SEL_P); - - tegra20_das_write(addr, reg); - - return 0; -} -EXPORT_SYMBOL_GPL(tegra20_das_connect_dap_to_dap); -int tegra20_das_connect_dac_to_dap(int dac, int dap) +static int tegra20_das_connect_dac_to_dap(int dac, int dap) { u32 addr; u32 reg; @@ -90,7 +147,6 @@ int tegra20_das_connect_dac_to_dap(int dac, int dap) return 0; } -EXPORT_SYMBOL_GPL(tegra20_das_connect_dac_to_dap); #define LAST_REG(name) \ (TEGRA20_DAS_##name + \ diff --git a/sound/soc/tegra/tegra20_das.h b/sound/soc/tegra/tegra20_das.h deleted file mode 100644 index 18e832ded73a..000000000000 --- a/sound/soc/tegra/tegra20_das.h +++ /dev/null @@ -1,120 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * tegra20_das.h - Definitions for Tegra20 DAS driver - * - * Author: Stephen Warren <swarren(a)nvidia.com> - * Copyright (C) 2010,2012 - NVIDIA, Inc. - */ - -#ifndef __TEGRA20_DAS_H__ -#define __TEGRA20_DAS_H__ - -/* Register TEGRA20_DAS_DAP_CTRL_SEL */ -#define TEGRA20_DAS_DAP_CTRL_SEL 0x00 -#define TEGRA20_DAS_DAP_CTRL_SEL_COUNT 5 -#define TEGRA20_DAS_DAP_CTRL_SEL_STRIDE 4 -#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_MS_SEL_P 31 -#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_MS_SEL_S 1 -#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_SDATA1_TX_RX_P 30 -#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_SDATA1_TX_RX_S 1 -#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_SDATA2_TX_RX_P 29 -#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_SDATA2_TX_RX_S 1 -#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_CTRL_SEL_P 0 -#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_CTRL_SEL_S 5 - -/* Values for field TEGRA20_DAS_DAP_CTRL_SEL_DAP_CTRL_SEL */ -#define TEGRA20_DAS_DAP_SEL_DAC1 0 -#define TEGRA20_DAS_DAP_SEL_DAC2 1 -#define TEGRA20_DAS_DAP_SEL_DAC3 2 -#define TEGRA20_DAS_DAP_SEL_DAP1 16 -#define TEGRA20_DAS_DAP_SEL_DAP2 17 -#define TEGRA20_DAS_DAP_SEL_DAP3 18 -#define TEGRA20_DAS_DAP_SEL_DAP4 19 -#define TEGRA20_DAS_DAP_SEL_DAP5 20 - -/* Register TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL */ -#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL 0x40 -#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_COUNT 3 -#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_STRIDE 4 -#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_SDATA2_SEL_P 28 -#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_SDATA2_SEL_S 4 -#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_SDATA1_SEL_P 24 -#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_SDATA1_SEL_S 4 -#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_CLK_SEL_P 0 -#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_CLK_SEL_S 4 - -/* - * Values for: - * TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_SDATA2_SEL - * TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_SDATA1_SEL - * TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_CLK_SEL - */ -#define TEGRA20_DAS_DAC_SEL_DAP1 0 -#define TEGRA20_DAS_DAC_SEL_DAP2 1 -#define TEGRA20_DAS_DAC_SEL_DAP3 2 -#define TEGRA20_DAS_DAC_SEL_DAP4 3 -#define TEGRA20_DAS_DAC_SEL_DAP5 4 - -/* - * Names/IDs of the DACs/DAPs. - */ - -#define TEGRA20_DAS_DAP_ID_1 0 -#define TEGRA20_DAS_DAP_ID_2 1 -#define TEGRA20_DAS_DAP_ID_3 2 -#define TEGRA20_DAS_DAP_ID_4 3 -#define TEGRA20_DAS_DAP_ID_5 4 - -#define TEGRA20_DAS_DAC_ID_1 0 -#define TEGRA20_DAS_DAC_ID_2 1 -#define TEGRA20_DAS_DAC_ID_3 2 - -struct tegra20_das { - struct device *dev; - struct regmap *regmap; -}; - -/* - * Terminology: - * DAS: Digital audio switch (HW module controlled by this driver) - * DAP: Digital audio port (port/pins on Tegra device) - * DAC: Digital audio controller (e.g. I2S or AC97 controller elsewhere) - * - * The Tegra DAS is a mux/cross-bar which can connect each DAP to a specific - * DAC, or another DAP. When DAPs are connected, one must be the master and - * one the slave. Each DAC allows selection of a specific DAP for input, to - * cater for the case where N DAPs are connected to 1 DAC for broadcast - * output. - * - * This driver is dumb; no attempt is made to ensure that a valid routing - * configuration is programmed. - */ - -/* - * Connect a DAP to a DAC - * dap_id: DAP to connect: TEGRA20_DAS_DAP_ID_* - * dac_sel: DAC to connect to: TEGRA20_DAS_DAP_SEL_DAC* - */ -extern int tegra20_das_connect_dap_to_dac(int dap, int dac); - -/* - * Connect a DAP to another DAP - * dap_id: DAP to connect: TEGRA20_DAS_DAP_ID_* - * other_dap_sel: DAP to connect to: TEGRA20_DAS_DAP_SEL_DAP* - * master: Is this DAP the master (1) or slave (0) - * sdata1rx: Is this DAP's SDATA1 pin RX (1) or TX (0) - * sdata2rx: Is this DAP's SDATA2 pin RX (1) or TX (0) - */ -extern int tegra20_das_connect_dap_to_dap(int dap, int otherdap, - int master, int sdata1rx, - int sdata2rx); - -/* - * Connect a DAC's input to a DAP - * (DAC outputs are selected by the DAP) - * dac_id: DAC ID to connect: TEGRA20_DAS_DAC_ID_* - * dap_sel: DAP to receive input from: TEGRA20_DAS_DAC_SEL_DAP* - */ -extern int tegra20_das_connect_dac_to_dap(int dac, int dap); - -#endif base-commit: f2906aa863381afb0015a9eb7fefad885d4e5a56 -- 2.36.1

2 5

[PATCH v2 0/2] ASoC: Intel: Skylake: Fixes for skl_get_ssp_clks()
by Peter Ujfalusi 06 Jul '22

06 Jul '22

Hi, Changes since v1: - drop reference to a might never happening patch from the commit message of patch 2. Cover letter: while looking at long standing sparse reports regarding to arrays of flexible structures (arrays of flexible arrays of flexible structures, really). I came across these which did not looked right. The skl_get_ssp_clks() as some issues and can work under only strict single condition. Regards, Peter --- Peter Ujfalusi (2): ASoC: Intel: Skylake: Correct the ssp rate discovery in skl_get_ssp_clks() ASoC: Intel: Skylake: Correct the handling of fmt_config flexible array sound/soc/intel/skylake/skl-nhlt.c | 40 ++++++++++++++++++++---------- 1 file changed, 27 insertions(+), 13 deletions(-) -- 2.37.0

3 4

[PATCH 0/3] soundwire: revisit peripheral driver bind/unbind
by Pierre-Louis Bossart 06 Jul '22

06 Jul '22

This patchset fixes the driver bind/unbind cases which are not well-supported today. I initially reported a race condition in March 2022 [1] and the more tests I ran the more timing assumptions crept to the surface. With this patchset, I've been able to bind the drivers in any order, and when all dependencies were available the card is created/registered. Likewise I was able to remove codec drivers while the bus was still running. The initial suggestion to use device_lock()/unlock() led to system hangs in suspend-resume that I was unable to root-cause after weeks of tests, hence this patchset relies on a SoundWire-specific lock doesn't interfere with other core device locking. I think it's a pretty important set of changes that would ideally be merged in this kernel cycle, so that we can finally add the inclusive 'manager/peripheral' language change in the next kernel cycle. Feedback and comments welcome. [1] https://lore.kernel.org/alsa-devel/d0559e97-c4a0-b817-428c-d3e305390270@lin… Pierre-Louis Bossart (3): soundwire: revisit driver bind/unbind and callbacks soundwire: peripheral: remove useless ops pointer soundwire: intel: use pm_runtime_resume() on component probe drivers/soundwire/bus.c | 75 ++++++++++++++++++++--------------- drivers/soundwire/bus_type.c | 30 +++++++++++--- drivers/soundwire/intel.c | 18 +++++++++ drivers/soundwire/slave.c | 3 +- drivers/soundwire/stream.c | 53 ++++++++++++++++--------- include/linux/soundwire/sdw.h | 8 +--- 6 files changed, 124 insertions(+), 63 deletions(-) -- 2.34.1

2 4

[PATCH v5 0/2] Read _SUB from ACPI to be able to identify firmware
by Stefan Binding 05 Jul '22

05 Jul '22

CS35L41 has a DSP which is able to run firmware, as well as a tuning file. Different systems may want to use different firmwares and tuning files, and some firmwares/tunings may not be compatible with other systems. To allow a system to select the correct fimware/tuning, we can read an _SUB from the ACPI. This _SUB can then be used to uniquely identify the system in the firmware/tuning file name. Add a helper function which reads the _SUB, so this can be used by other parts in the future. Add support inside the CS35L41 ASoC driver to read this _SUB, and save it appropriately. Changes since v4: - Rename function Changes since v3: - Fix 32 bit format string warning Changes since v2: - Fix error in function prototype Changes since v1: - Add length validation for SSID String - Rename API - Allocate memory inside API - Use ACPI_HANDLE macro instead of ACPI_COMPANION - Improve error handling Stefan Binding (2): ACPI: utils: Add api to read _SUB from ACPI ASoC: cs35l41: Read System Name from ACPI _SUB to identify firmware drivers/acpi/utils.c | 38 ++++++++++++++++++++++++++++++++++++++ include/linux/acpi.h | 6 ++++++ sound/soc/codecs/cs35l41.c | 24 ++++++++++++++++++++++++ 3 files changed, 68 insertions(+) -- 2.25.1

5 7

[PATCH v1 1/1] ASoC: madera: Replace kernel.h with the necessary inclusions
by Andy Shevchenko 05 Jul '22

05 Jul '22

When kernel.h is used in the headers it adds a lot into dependency hell, especially when there are circular dependencies are involved. Replace kernel.h inclusion with the list of what is really being used. Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> --- include/sound/madera-pdata.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/sound/madera-pdata.h b/include/sound/madera-pdata.h index e3060f48f108..58398d80c3de 100644 --- a/include/sound/madera-pdata.h +++ b/include/sound/madera-pdata.h @@ -9,7 +9,7 @@ #ifndef MADERA_CODEC_PDATA_H #define MADERA_CODEC_PDATA_H -#include <linux/kernel.h> +#include <linux/types.h> #define MADERA_MAX_INPUT 6 #define MADERA_MAX_MUXED_CHANNELS 4 -- 2.35.1

4 8

[PATCH v2 00/14] ASoC: Intel: avs: Machine boards and HDA codec support
by Cezary Rojewski 05 Jul '22

05 Jul '22

This series focuses on populating boards/ subdirectory with supported configurations by the avs-driver. Note: it is independent of recently provided "Driver code and PCM operations" series [1], that is, code found here should not collide with it. Series starts with a small change that adds a helper to sound pcm header, allowing for retrieving string naming a direction without the need of substream pointer. Said helper is used by codec driver code that follows it but I believe it's generic and helpful enough that it can be called an independent addition to the sound core. Code for generic HD-Audio codec driver follows. It is a ASoC wrapper for existing HD-Audio codec code found in sound/pci/hda/. There is basically no custom logic involved up to the point that driver follows HDA_DEV_LEGACY convention, rather than the HDA_DEV_ASOC one. Commit message for the given patch iterates on this and explains crucial parts of the implementation. >From there on is a range of boards appended. All of them follow the same scheme: - define avs_create_dai_link() so DAI-LINKs can be created dynamically, based on the link_mask (I2S) or the number of entries in the ->pcm_list_head list (HDA) - define avs_create_dapm_routes() so DAPM routes can be created dynamically, same rules as above apply - define probe() function that creates new ASoC card, assign all required operations and resources along with calling the two above Changes in v2: - 'link_mask' usage replaced with 'i2s_link_mask' as requested by Pierre - 'ssp_test' board renamed to 'i2s_test' to match naming convention used for other i2s machine boards - enriched commit message and Kconfig for the 'HD-Audio codec driver' patch as requested by Kai [1]: https://lore.kernel.org/all/20220426172346.3508411-1-cezary.rojewski@intel.… Amadeusz Sławiński (1): ASoC: Intel: avs: Add max98373 machine board Cezary Rojewski (13): ALSA: Add snd_pcm_direction_name() helper ASoC: codecs: Add HD-Audio codec driver ASoC: Intel: avs: Add HDAudio machine board ASoC: Intel: avs: Add DMIC machine board ASoC: Intel: avs: Add I2S-test machine board ASoC: Intel: avs: Add rt274 machine board ASoC: Intel: avs: Add rt286 machine board ASoC: Intel: avs: Add rt298 machine board ASoC: Intel: avs: Add rt5682 machine board ASoC: Intel: avs: Add nau8825 machine board ASoC: Intel: avs: Add ssm4567 machine board ASoC: Intel: avs: Add max98357a machine board ASoC: Intel: avs: Add da7219 machine board include/sound/pcm.h | 19 +- sound/soc/codecs/Kconfig | 10 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/hda-dai.c | 102 +++++++ sound/soc/codecs/hda.c | 395 +++++++++++++++++++++++++ sound/soc/codecs/hda.h | 19 ++ sound/soc/intel/Kconfig | 3 + sound/soc/intel/avs/Makefile | 3 + sound/soc/intel/avs/boards/Kconfig | 121 ++++++++ sound/soc/intel/avs/boards/Makefile | 27 ++ sound/soc/intel/avs/boards/da7219.c | 282 ++++++++++++++++++ sound/soc/intel/avs/boards/dmic.c | 93 ++++++ sound/soc/intel/avs/boards/hdaudio.c | 294 ++++++++++++++++++ sound/soc/intel/avs/boards/i2s_test.c | 180 +++++++++++ sound/soc/intel/avs/boards/max98357a.c | 154 ++++++++++ sound/soc/intel/avs/boards/max98373.c | 239 +++++++++++++++ sound/soc/intel/avs/boards/nau8825.c | 353 ++++++++++++++++++++++ sound/soc/intel/avs/boards/rt274.c | 310 +++++++++++++++++++ sound/soc/intel/avs/boards/rt286.c | 281 ++++++++++++++++++ sound/soc/intel/avs/boards/rt298.c | 281 ++++++++++++++++++ sound/soc/intel/avs/boards/rt5682.c | 340 +++++++++++++++++++++ sound/soc/intel/avs/boards/ssm4567.c | 271 +++++++++++++++++ 22 files changed, 3775 insertions(+), 4 deletions(-) create mode 100644 sound/soc/codecs/hda-dai.c create mode 100644 sound/soc/codecs/hda.c create mode 100644 sound/soc/codecs/hda.h create mode 100644 sound/soc/intel/avs/boards/Kconfig create mode 100644 sound/soc/intel/avs/boards/Makefile create mode 100644 sound/soc/intel/avs/boards/da7219.c create mode 100644 sound/soc/intel/avs/boards/dmic.c create mode 100644 sound/soc/intel/avs/boards/hdaudio.c create mode 100644 sound/soc/intel/avs/boards/i2s_test.c create mode 100644 sound/soc/intel/avs/boards/max98357a.c create mode 100644 sound/soc/intel/avs/boards/max98373.c create mode 100644 sound/soc/intel/avs/boards/nau8825.c create mode 100644 sound/soc/intel/avs/boards/rt274.c create mode 100644 sound/soc/intel/avs/boards/rt286.c create mode 100644 sound/soc/intel/avs/boards/rt298.c create mode 100644 sound/soc/intel/avs/boards/rt5682.c create mode 100644 sound/soc/intel/avs/boards/ssm4567.c -- 2.25.1

3 19

[PATCH] ALSA: wavefront: remove redundant assignment to pointer end
by Colin Ian King 04 Jul '22

04 Jul '22

Pointer end is being re-assigned the same value as it was initialized with in the previous statement. The re-assignment is redundant and can be removed. Cleans up clang scan-build warning: sound/isa/wavefront/wavefront_synth.c:582:17: warning: Value stored to 'end' during its initialization is never read Signed-off-by: Colin Ian King <colin.i.king(a)gmail.com> --- sound/isa/wavefront/wavefront_synth.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/sound/isa/wavefront/wavefront_synth.c b/sound/isa/wavefront/wavefront_synth.c index 2aaaa6807174..13ce96148fa3 100644 --- a/sound/isa/wavefront/wavefront_synth.c +++ b/sound/isa/wavefront/wavefront_synth.c @@ -581,8 +581,6 @@ demunge_buf (unsigned char *src, unsigned char *dst, unsigned int src_bytes) int i; unsigned char *end = src + src_bytes; - end = src + src_bytes; - /* NOTE: src and dst *CAN* point to the same address */ for (i = 0; src != end; i++) { -- 2.35.3

2 2