May 2022 - Alsa-devel - mailman.alsa-project.org

[PATCH v2] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties
by Nícolas F. R. A. Prado 29 May '22

29 May '22

The Mediatek AFE PCM controller for MT8192 allows two I2S interfaces to share the same clock and act as a single interface with both input and output. Add patterns for these properties in the dt-binding. The property is split into two patterns in order to allow all valid interface pairings. Signed-off-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> --- The series from v1 of this patch was merged although some changes were still needed in this patch, so the v1 of this patch was reverted [1] and this standalone commit addresses the feedback from v1 and readds the property. [1] https://lore.kernel.org/all/20220509185625.580811-1-nfraprado@collabora.com v1: https://lore.kernel.org/all/20220429203039.2207848-2-nfraprado@collabora.co… Changes in v2: - Added "mediatek," prefix to property - Rewrote and added more information to property description - Split into two patterns to validate that output-input pairings are done .../bindings/sound/mt8192-afe-pcm.yaml | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml index 7a25bc9b8060..2abf43c6c2c3 100644 --- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml @@ -54,6 +54,22 @@ properties: - const: aud_infra_clk - const: aud_infra_26m_clk +patternProperties: + "^mediatek,i2s[13579]-share$": + description: + Each I2S interface has a single data line, input if its index is even or + output if the index is odd. An input and an output I2S interface can be + used together as if they were a single I2S interface with both input and + output data lines by sharing the same clock. This property represents this + pairing. The value should be the name of the interface whose clock is + used, and the property name the other interface that depends on this + clock. + pattern: "^I2S[0268]$" + + "^mediatek,i2s[0268]-share$": + description: Same as above. + pattern: "^I2S[13579]$" + required: - compatible - interrupts -- 2.36.0

3 5

ucm2 profile for Behringer Flow8
by GitHub pull_request - edited 28 May '22

28 May '22

alsa-project/alsa-ucm-conf pull request #160 was edited from smangels: - kudos to Pekka Oinas for supporting me finding the right settings - provides an UCM2 profile for Behringer's digital mixer Flow8 configured into "streaming" mode - 2 stereo outputs, 1 stereo input, when vendor ID product ID are `1397:050d` - prepare filenames for Flow8's recording mode `1397:050c` (10 chan input, 4 chan output) Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/160 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/160.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

ucm2 profile for Behringer Flow8
by GitHub pull_request - edited 28 May '22

28 May '22

alsa-project/alsa-ucm-conf pull request #160 was edited from smangels: - kudos to Pekka Oinas for supporting me finding the right settings - provides an UCM2 profile for Behringer's digital mixer Flow8 configured into "streaming" mode - 2 stereo outputs, 1 stereo input - prepare filenames for Flow8's recording mode (10 chan input, 4 chan output) Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/160 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/160.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

ucm2 profile for Behringer Flow8
by GitHub pull_request - opened 28 May '22

28 May '22

alsa-project/alsa-ucm-conf pull request #160 was opened from smangels: - kudos to Pekka Oinas for supporting me finding the right settings - provides an UCM2 profile for Behringer's digital mixer Flow configured into "streaming" mode - 2 stereo outputs, 1 stereo input - prepare filenames for Flow8's recording mode (10 chan input, 4 chan output) Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/160 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/160.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

ucm2 profile for Behringer Flow8
by GitHub pull_request - opened 28 May '22

28 May '22

alsa-project/alsa-ucm-conf pull request #159 was opened from smangels: - kudos to Pekka Oinas for supporting me finding the right settings - provides an UCM2 profile for Behringer's digital mixer Flow configured into "streaming" mode - 2 stereo outputs, 1 stereo input Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/159 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/159.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH] ALSA: hda/via: Delete does not require return
by Xiang wangx 27 May '22

27 May '22

Void function return statements are not generally useful. Signed-off-by: Xiang wangx <wangxiang(a)cdjrlc.com> --- sound/pci/hda/patch_via.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c index 773a136161f1..a05304f340df 100644 --- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -449,8 +449,6 @@ static void vt1708_set_pinconfig_connect(struct hda_codec *codec, hda_nid_t nid) def_conf = def_conf & (~(AC_JACK_PORT_BOTH << 30)); snd_hda_codec_set_pincfg(codec, nid, def_conf); } - - return; } static int vt1708_jack_detect_get(struct snd_kcontrol *kcontrol, -- 2.36.1

2 1

[Patch] ALSA: hda/realtek: Enable 4-speaker output for Dell XPS 15 9520 laptop
by Rik van der Kemp 27 May '22

27 May '22

The 2022-model XPS 15 appears to use the same 4-speakers-on-ALC289 audio setup as the Dell XPS 15 9510, so requires the same quirk to enable woofer output. Tested on my own 9520. Signed-off-by: Rik van der Kemp <rik(a)upto11.nl> --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 80e4955e8c10..e64597f2675b 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8902,6 +8902,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x0a38, "Dell Latitude 7520", ALC269_FIXUP_DELL4_MIC_NO_PRESENCE_QUIET), SND_PCI_QUIRK(0x1028, 0x0a58, "Dell", ALC255_FIXUP_DELL_HEADSET_MIC), SND_PCI_QUIRK(0x1028, 0x0a61, "Dell XPS 15 9510", ALC289_FIXUP_DUAL_SPK), + SND_PCI_QUIRK(0x1028, 0x0b19, "Dell XPS 15 9520", ALC289_FIXUP_DUAL_SPK), SND_PCI_QUIRK(0x1028, 0x0a62, "Dell Precision 5560", ALC289_FIXUP_DUAL_SPK), SND_PCI_QUIRK(0x1028, 0x0a9d, "Dell Latitude 5430", ALC269_FIXUP_DELL4_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x0a9e, "Dell Latitude 5430", ALC269_FIXUP_DELL4_MIC_NO_PRESENCE), BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216035 Signed-off-by: Rik van der Kemp <rik(a)upto11.nl>

2 1

[PATCH] Enable SPDIF output on Intel Hades Canyon
by Dag B 27 May '22

27 May '22

Without the attached patch, the s/pdif output on the Hades Canyon NUC does not work. "Well known" issue, less known fix. As far as I can tell, there is no risk of any averse side-effects. But a bonus fix is enabling on-wire headset microphone, by chaining the right 'model' choice for the hardware. If I should Cc: someone directly for this patch to be picked up, please let me know. I have been running with this patch for half a year or so. Patch passes checkpatch.pl Patch is based on what 'cyber4o' posted on the insanelymac forum [1]. All the glory to this person, any error is likely mine. Some other users with issues: [2] [3] Dag Bakke [1] https://www.insanelymac.com/forum/topic/339291-guide-hac-mini-osx-mojave-on… 2] https://bbs.archlinux.org/viewtopic.php?id=270917 [3] https://www.reddit.com/r/intelnuc/comments/9ft9x8/any_linux_users_got_the_s…

3 6

[PATCH] ASoC: da732x: Drop no-op remove function
by Uwe Kleine-König 27 May '22

27 May '22

A remove callback that just returns 0 is equivalent to no callback at all as can be seen in i2c_device_remove(). So simplify accordingly. Signed-off-by: Uwe Kleine-König <u.kleine-koenig(a)pengutronix.de> --- sound/soc/codecs/da732x.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/sound/soc/codecs/da732x.c b/sound/soc/codecs/da732x.c index 42d6a3fc3af5..267936015cb8 100644 --- a/sound/soc/codecs/da732x.c +++ b/sound/soc/codecs/da732x.c @@ -1547,11 +1547,6 @@ static int da732x_i2c_probe(struct i2c_client *i2c, return ret; } -static int da732x_i2c_remove(struct i2c_client *client) -{ - return 0; -} - static const struct i2c_device_id da732x_i2c_id[] = { { "da7320", 0}, { } @@ -1563,7 +1558,6 @@ static struct i2c_driver da732x_i2c_driver = { .name = "da7320", }, .probe = da732x_i2c_probe, - .remove = da732x_i2c_remove, .id_table = da732x_i2c_id, }; base-commit: 4b0986a3613c92f4ec1bdc7f60ec66fea135991f -- 2.36.1

2 1

[PATCH] ASoC: fsl_xcvr:Fix unbalanced pm_runtime_enable in fsl_xcvr_probe
by zhangqilong 27 May '22

27 May '22

Add missing pm_runtime_disable() when probe error out. It could avoid pm_runtime implementation complains when removing and probing again the driver. Fix:c590fa80b3928 ("ASoC: fsl_xcvr: register platform component before registering cpu dai") Signed-off-by: Zhang Qilong <zhangqilong3(a)huawei.com> --- sound/soc/fsl/fsl_xcvr.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/fsl/fsl_xcvr.c b/sound/soc/fsl/fsl_xcvr.c index d0556c79fdb1..907435efe121 100644 --- a/sound/soc/fsl/fsl_xcvr.c +++ b/sound/soc/fsl/fsl_xcvr.c @@ -1228,6 +1228,7 @@ static int fsl_xcvr_probe(struct platform_device *pdev) */ ret = devm_snd_dmaengine_pcm_register(dev, NULL, 0); if (ret) { + pm_runtime_disable(dev); dev_err(dev, "failed to pcm register\n"); return ret; } @@ -1235,6 +1236,7 @@ static int fsl_xcvr_probe(struct platform_device *pdev) ret = devm_snd_soc_register_component(dev, &fsl_xcvr_comp, &fsl_xcvr_dai, 1); if (ret) { + pm_runtime_disable(dev); dev_err(dev, "failed to register component %s\n", fsl_xcvr_comp.name); } -- 2.31.1

2 1