May 2022 - Alsa-devel - mailman.alsa-project.org

[PATCH v2] ASoC: qcom: soundwire: Add support for controlling audio CGCR from HLOS
by Srinivasa Rao Mandadapu 07 Jun '22

07 Jun '22

Add support for controlling soundwire audio CGCR interface using clock framework to make hclk ungating with software. As per new hardware changes, software has to always ungate hclk if soundwire is operational and keep it running. This requirement is for latest LPASS chipsets for RX, TX and WSA path to work. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam(a)quicinc.com> --- This patch set depends on: -- Clock driver patches for CGCR reset control support. --- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638002 --- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=637998 Changes since v1: -- Add audio cgcr reset control in runtime PM resume handler. -- Update dependency list. drivers/soundwire/qcom.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index da1ad7e..445e481 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -13,6 +13,7 @@ #include <linux/of_device.h> #include <linux/pm_runtime.h> #include <linux/regmap.h> +#include <linux/reset.h> #include <linux/slab.h> #include <linux/pm_wakeirq.h> #include <linux/slimbus.h> @@ -142,6 +143,7 @@ struct qcom_swrm_ctrl { struct device *dev; struct regmap *regmap; void __iomem *mmio; + struct reset_control *audio_cgcr; #ifdef CONFIG_DEBUG_FS struct dentry *debugfs; #endif @@ -656,6 +658,8 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl) val = FIELD_PREP(SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_BMSK, ctrl->rows_index); val |= FIELD_PREP(SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_BMSK, ctrl->cols_index); + reset_control_reset(ctrl->audio_cgcr); + ctrl->reg_write(ctrl, SWRM_MCP_FRAME_CTRL_BANK_ADDR(0), val); /* Enable Auto enumeration */ @@ -1333,6 +1337,10 @@ static int qcom_swrm_probe(struct platform_device *pdev) ctrl->bus.compute_params = &qcom_swrm_compute_params; ctrl->bus.clk_stop_timeout = 300; + ctrl->audio_cgcr = devm_reset_control_get_exclusive(dev, "swr_audio_cgcr"); + if (IS_ERR(ctrl->audio_cgcr)) + dev_err(dev, "Failed to get audio_cgcr reset required for soundwire-v1.6.0\n"); + ret = qcom_swrm_get_port_config(ctrl); if (ret) goto err_clk; @@ -1486,6 +1494,8 @@ static int __maybe_unused swrm_runtime_resume(struct device *dev) qcom_swrm_get_device_status(ctrl); sdw_handle_slave_status(&ctrl->bus, ctrl->status); } else { + reset_control_reset(ctrl->audio_cgcr); + ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START); ctrl->reg_write(ctrl, SWRM_INTERRUPT_CLEAR, SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET); -- 2.7.4

5 9

[PATCH] ASoC: fsl_asrc_dma: enable dual fifo for ASRC P2P
by Shengjiu Wang 07 Jun '22

07 Jun '22

The SSI and SPDIF has dual fifos, enhance P2P for these case with using the sdma_peripheral_config struct Signed-off-by: Shengjiu Wang <shengjiu.wang(a)nxp.com> --- sound/soc/fsl/fsl_asrc_dma.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/sound/soc/fsl/fsl_asrc_dma.c b/sound/soc/fsl/fsl_asrc_dma.c index 5038faf035cb..aaf7993935b7 100644 --- a/sound/soc/fsl/fsl_asrc_dma.c +++ b/sound/soc/fsl/fsl_asrc_dma.c @@ -129,6 +129,7 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component, struct snd_pcm_hw_params *params) { enum dma_slave_buswidth buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES; + enum sdma_peripheral_type be_peripheral_type = IMX_DMATYPE_SSI; struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; struct snd_dmaengine_dai_dma_data *dma_params_fe = NULL; @@ -139,6 +140,7 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component, struct snd_soc_component *component_be = NULL; struct fsl_asrc *asrc = pair->asrc; struct dma_slave_config config_fe, config_be; + struct sdma_peripheral_config audio_config; enum asrc_pair_index index = pair->index; struct device *dev = component->dev; struct device_node *of_dma_node; @@ -221,6 +223,7 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component, /* Get DMA request of Back-End */ tmp_data = tmp_chan->private; pair->dma_data.dma_request = tmp_data->dma_request; + be_peripheral_type = tmp_data->peripheral_type; if (!be_chan) dma_release_channel(tmp_chan); @@ -268,6 +271,17 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component, config_be.dst_addr_width = buswidth; config_be.dst_maxburst = dma_params_be->maxburst; + memset(&audio_config, 0, sizeof(audio_config)); + config_be.peripheral_config = &audio_config; + config_be.peripheral_size = sizeof(audio_config); + + if (tx && (be_peripheral_type == IMX_DMATYPE_SSI_DUAL || + be_peripheral_type == IMX_DMATYPE_SPDIF)) + audio_config.n_fifos_dst = 2; + if (!tx && (be_peripheral_type == IMX_DMATYPE_SSI_DUAL || + be_peripheral_type == IMX_DMATYPE_SPDIF)) + audio_config.n_fifos_src = 2; + if (tx) { config_be.src_addr = asrc->paddr + asrc->get_fifo_addr(OUT, index); config_be.dst_addr = dma_params_be->addr; -- 2.17.1

2 1

[PATCH] slimbus: messaging: fix typos in comments
by Julia Lawall 06 Jun '22

06 Jun '22

Spelling mistakes (triple letters) in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall(a)inria.fr> --- drivers/slimbus/messaging.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/slimbus/messaging.c b/drivers/slimbus/messaging.c index e5ae26227bdb..4ce0cb61e481 100644 --- a/drivers/slimbus/messaging.c +++ b/drivers/slimbus/messaging.c @@ -79,7 +79,7 @@ int slim_alloc_txn_tid(struct slim_controller *ctrl, struct slim_msg_txn *txn) EXPORT_SYMBOL_GPL(slim_alloc_txn_tid); /** - * slim_free_txn_tid() - Freee tid of txn + * slim_free_txn_tid() - Free tid of txn * * @ctrl: Controller handle * @txn: transaction whose tid should be freed @@ -101,7 +101,7 @@ EXPORT_SYMBOL_GPL(slim_free_txn_tid); * @txn: Transaction to be sent over SLIMbus * * Called by controller to transmit messaging transactions not dealing with - * Interface/Value elements. (e.g. transmittting a message to assign logical + * Interface/Value elements. (e.g. transmitting a message to assign logical * address to a slave device * * Return: -ETIMEDOUT: If transmission of this message timed out

2 1

[PATCH] drivers: slimbus: Directly use ida_alloc()/free()
by keliu 06 Jun '22

06 Jun '22

Use ida_alloc()/ida_free() instead of deprecated ida_simple_get()/ida_simple_remove() . Signed-off-by: keliu <liuke94(a)huawei.com> --- drivers/slimbus/core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/slimbus/core.c b/drivers/slimbus/core.c index 78480e332ab8..219483b79c09 100644 --- a/drivers/slimbus/core.c +++ b/drivers/slimbus/core.c @@ -250,7 +250,7 @@ int slim_register_controller(struct slim_controller *ctrl) { int id; - id = ida_simple_get(&ctrl_ida, 0, 0, GFP_KERNEL); + id = ida_alloc(&ctrl_ida, GFP_KERNEL); if (id < 0) return id; @@ -299,7 +299,7 @@ int slim_unregister_controller(struct slim_controller *ctrl) { /* Remove all clients */ device_for_each_child(ctrl->dev, NULL, slim_ctrl_remove_device); - ida_simple_remove(&ctrl_ida, ctrl->id); + ida_free(&ctrl_ida, ctrl->id); return 0; } @@ -323,7 +323,7 @@ void slim_report_absent(struct slim_device *sbdev) sbdev->is_laddr_valid = false; mutex_unlock(&ctrl->lock); if (!ctrl->get_laddr) - ida_simple_remove(&ctrl->laddr_ida, sbdev->laddr); + ida_free(&ctrl->laddr_ida, sbdev->laddr); slim_device_update_status(sbdev, SLIM_DEVICE_STATUS_DOWN); } EXPORT_SYMBOL_GPL(slim_report_absent); -- 2.25.1

2 1

[PATCH] dt-bindings: Fix properties without any type
by Rob Herring 06 Jun '22

06 Jun '22

Now that the schema tools can extract type information for all properties (in order to decode dtb files), finding properties missing any type definition is fairly trivial though not yet automated. Fix the various property schemas which are missing a type. Most of these tend to be device specific properties which don't have a vendor prefix. A vendor prefix is how we normally ensure a type is defined. Signed-off-by: Rob Herring <robh(a)kernel.org> --- .../arm/hisilicon/controller/hip04-bootwrapper.yaml | 5 +++-- .../bindings/display/bridge/toshiba,tc358768.yaml | 1 + .../devicetree/bindings/display/panel/panel-timing.yaml | 5 +++++ .../bindings/display/panel/raydium,rm67191.yaml | 1 + .../bindings/display/panel/samsung,s6e8aa0.yaml | 1 + .../devicetree/bindings/gpio/fairchild,74hc595.yaml | 1 + .../devicetree/bindings/input/google,cros-ec-keyb.yaml | 1 + .../devicetree/bindings/input/matrix-keymap.yaml | 4 ++++ Documentation/devicetree/bindings/media/i2c/adv7604.yaml | 3 ++- Documentation/devicetree/bindings/mux/reg-mux.yaml | 8 ++++++-- Documentation/devicetree/bindings/net/cdns,macb.yaml | 1 + Documentation/devicetree/bindings/net/ingenic,mac.yaml | 1 + .../devicetree/bindings/net/ti,davinci-mdio.yaml | 1 + .../devicetree/bindings/net/wireless/ti,wlcore.yaml | 2 ++ .../devicetree/bindings/pci/snps,dw-pcie-ep.yaml | 6 ++++-- Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml | 2 ++ .../devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml | 2 ++ Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml | 1 + .../devicetree/bindings/power/supply/battery.yaml | 7 ++++++- .../devicetree/bindings/power/supply/charger-manager.yaml | 1 + Documentation/devicetree/bindings/rng/st,stm32-rng.yaml | 1 + Documentation/devicetree/bindings/serial/8250.yaml | 1 + .../devicetree/bindings/sound/audio-graph-card2.yaml | 3 +++ .../devicetree/bindings/sound/imx-audio-hdmi.yaml | 3 +++ Documentation/devicetree/bindings/usb/smsc,usb3503.yaml | 1 + 25 files changed, 55 insertions(+), 8 deletions(-) diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml index 7378159e61df..483caf0ce25b 100644 --- a/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml @@ -17,14 +17,15 @@ properties: - const: hisilicon,hip04-bootwrapper boot-method: + $ref: /schemas/types.yaml#/definitions/uint32-array description: | Address and size of boot method. [0]: bootwrapper physical address [1]: bootwrapper size [2]: relocation physical address [3]: relocation size - minItems: 1 - maxItems: 2 + minItems: 2 + maxItems: 4 required: - compatible diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml index 3bd670b8e5cd..0b6f5bef120f 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml @@ -58,6 +58,7 @@ properties: properties: data-lines: + $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 16, 18, 24 ] port@1: diff --git a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml index 7749de95ee40..229e3b36ee29 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml @@ -146,6 +146,7 @@ properties: Horizontal sync pulse. 0 selects active low, 1 selects active high. If omitted then it is not used by the hardware + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] vsync-active: @@ -153,6 +154,7 @@ properties: Vertical sync pulse. 0 selects active low, 1 selects active high. If omitted then it is not used by the hardware + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] de-active: @@ -160,6 +162,7 @@ properties: Data enable. 0 selects active low, 1 selects active high. If omitted then it is not used by the hardware + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] pixelclk-active: @@ -169,6 +172,7 @@ properties: sample data on rising edge. Use 1 to drive pixel data on rising edge and sample data on falling edge + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] syncclk-active: @@ -179,6 +183,7 @@ properties: sample sync on rising edge of pixel clock. Use 1 to drive sync on rising edge and sample sync on falling edge of pixel clock + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] interlaced: diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml index 745dd247c409..617aa8c8c03a 100644 --- a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml @@ -24,6 +24,7 @@ properties: dsi-lanes: description: Number of DSI lanes to be used must be <3> or <4> + $ref: /schemas/types.yaml#/definitions/uint32 enum: [3, 4] v3p3-supply: diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml index ca959451557e..1cdc91b3439f 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml @@ -36,6 +36,7 @@ properties: init-delay: description: delay after initialization sequence [ms] + $ref: /schemas/types.yaml#/definitions/uint32 panel-width-mm: description: physical panel width [mm] diff --git a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml index 5fe19fa5f67c..a99e7842ca17 100644 --- a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml +++ b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml @@ -26,6 +26,7 @@ properties: const: 2 registers-number: + $ref: /schemas/types.yaml#/definitions/uint32 description: Number of daisy-chained shift registers enable-gpios: diff --git a/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml b/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml index e8f137abb03c..aa61fe64be63 100644 --- a/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml +++ b/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml @@ -31,6 +31,7 @@ properties: type: boolean function-row-physmap: + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 maxItems: 15 description: | diff --git a/Documentation/devicetree/bindings/input/matrix-keymap.yaml b/Documentation/devicetree/bindings/input/matrix-keymap.yaml index 6699d5e32dca..9f703bb51e12 100644 --- a/Documentation/devicetree/bindings/input/matrix-keymap.yaml +++ b/Documentation/devicetree/bindings/input/matrix-keymap.yaml @@ -27,6 +27,10 @@ properties: column and linux key-code. The 32-bit big endian cell is packed as: row << 24 | column << 16 | key-code + linux,no-autorepeat: + type: boolean + description: Disable keyrepeat + keypad,num-rows: $ref: /schemas/types.yaml#/definitions/uint32 description: Number of row lines connected to the keypad controller. diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml index c19d8391e2d5..7589d377c686 100644 --- a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml +++ b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml @@ -60,7 +60,8 @@ properties: enables hot-plug detection. default-input: - maxItems: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] description: Select which input is selected after reset. diff --git a/Documentation/devicetree/bindings/mux/reg-mux.yaml b/Documentation/devicetree/bindings/mux/reg-mux.yaml index 60d5746eb39d..e2f6b11f1254 100644 --- a/Documentation/devicetree/bindings/mux/reg-mux.yaml +++ b/Documentation/devicetree/bindings/mux/reg-mux.yaml @@ -25,8 +25,12 @@ properties: const: 1 mux-reg-masks: - description: an array of register offset and pre-shifted bitfield mask - pairs, each describing a single mux control. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: register offset + - description: pre-shifted bitfield mask + description: Each entry describes a single mux control. idle-states: true diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml index 6cd3d853dcba..59fe2789fa44 100644 --- a/Documentation/devicetree/bindings/net/cdns,macb.yaml +++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml @@ -129,6 +129,7 @@ patternProperties: reset-gpios: true magic-packet: + type: boolean description: Indicates that the hardware supports waking up via magic packet. diff --git a/Documentation/devicetree/bindings/net/ingenic,mac.yaml b/Documentation/devicetree/bindings/net/ingenic,mac.yaml index 8e52b2e683b8..93b3e991d209 100644 --- a/Documentation/devicetree/bindings/net/ingenic,mac.yaml +++ b/Documentation/devicetree/bindings/net/ingenic,mac.yaml @@ -37,6 +37,7 @@ properties: const: stmmaceth mode-reg: + $ref: /schemas/types.yaml#/definitions/phandle description: An extra syscon register that control ethernet interface and timing delay rx-clk-delay-ps: diff --git a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml index 6f44f9516c36..a339202c5e8e 100644 --- a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml +++ b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml @@ -34,6 +34,7 @@ properties: maxItems: 1 bus_freq: + $ref: /schemas/types.yaml#/definitions/uint32 maximum: 2500000 description: MDIO Bus frequency diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml index 8dd164d10290..d68bb2ec1f7e 100644 --- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml +++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml @@ -54,9 +54,11 @@ properties: ref-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 description: Reference clock frequency. tcxo-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 description: TCXO clock frequency. clock-xtal: diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml index e59059ab5be0..b78535040f04 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml @@ -55,13 +55,15 @@ properties: Translation Unit) registers. num-ib-windows: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 256 description: number of inbound address translation windows - maxItems: 1 deprecated: true num-ob-windows: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 256 description: number of outbound address translation windows - maxItems: 1 deprecated: true required: diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml index a5345c494744..c90e5e2d25f6 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml @@ -68,6 +68,8 @@ properties: Translation Unit) registers. num-viewport: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 256 description: | number of view ports configured in hardware. If a platform does not specify it, the driver autodetects it. diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml index 53e963e090f2..533b4cfe33d2 100644 --- a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml +++ b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml @@ -120,6 +120,7 @@ patternProperties: input-schmitt-disable: true input-polarity-invert: + type: boolean description: Enable or disable pin input polarity inversion. @@ -132,6 +133,7 @@ patternProperties: output-low: true output-polarity-invert: + type: boolean description: Enable or disable pin output polarity inversion. diff --git a/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml index 3301fa0c2653..301db7daf870 100644 --- a/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml +++ b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml @@ -51,6 +51,7 @@ properties: supported by the CPR power domain. acc-syscon: + $ref: /schemas/types.yaml#/definitions/phandle description: A phandle to the syscon used for writing ACC settings. nvmem-cells: diff --git a/Documentation/devicetree/bindings/power/supply/battery.yaml b/Documentation/devicetree/bindings/power/supply/battery.yaml index d56ac484fec5..491488e7b970 100644 --- a/Documentation/devicetree/bindings/power/supply/battery.yaml +++ b/Documentation/devicetree/bindings/power/supply/battery.yaml @@ -85,8 +85,13 @@ properties: description: battery factory internal resistance resistance-temp-table: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: the temperature in degree Celsius + - description: battery internal resistance percent description: | - An array providing the temperature in degree Celsius + A table providing the temperature in degree Celsius and corresponding battery internal resistance percent, which is used to look up the resistance percent according to current temperature to get an accurate batterty internal resistance in different temperatures. diff --git a/Documentation/devicetree/bindings/power/supply/charger-manager.yaml b/Documentation/devicetree/bindings/power/supply/charger-manager.yaml index c863cfa67865..fbb2204769aa 100644 --- a/Documentation/devicetree/bindings/power/supply/charger-manager.yaml +++ b/Documentation/devicetree/bindings/power/supply/charger-manager.yaml @@ -36,6 +36,7 @@ properties: cm-poll-mode: description: polling mode + $ref: /schemas/types.yaml#/definitions/uint32 default: 0 enum: - 0 # disabled diff --git a/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml b/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml index 9a6e4eaf4d3c..fcd86f822a9c 100644 --- a/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml +++ b/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml @@ -27,6 +27,7 @@ properties: maxItems: 1 clock-error-detect: + type: boolean description: If set enable the clock detection management required: diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml index 3bab2f27b970..5f6b113d378f 100644 --- a/Documentation/devicetree/bindings/serial/8250.yaml +++ b/Documentation/devicetree/bindings/serial/8250.yaml @@ -138,6 +138,7 @@ properties: description: The current active speed of the UART. reg-offset: + $ref: /schemas/types.yaml#/definitions/uint32 description: | Offset to apply to the mapbase from the start of the registers. diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml index f7e94b1e0e4b..7416067c945e 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml +++ b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml @@ -24,10 +24,13 @@ properties: connection's sink, the second being the connection's source. $ref: /schemas/types.yaml#/definitions/non-unique-string-array multi: + type: object description: Multi-CPU/Codec node dpcm: + type: object description: DPCM node codec2codec: + type: object description: Codec to Codec node required: diff --git a/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml b/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml index d5474f83ac2c..e7e7bb65c366 100644 --- a/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml +++ b/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml @@ -20,9 +20,11 @@ properties: description: User specified audio sound card name audio-cpu: + $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of an CPU DAI controller hdmi-out: + type: boolean description: | This is a boolean property. If present, the transmitting function of HDMI will be enabled, indicating there's a physical HDMI out @@ -30,6 +32,7 @@ properties: block, such as an HDMI encoder or display-controller. hdmi-in: + type: boolean description: | This is a boolean property. If present, the receiving function of HDMI will be enabled, indicating there is a physical HDMI in diff --git a/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml b/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml index b9e219829801..321b6f166197 100644 --- a/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml +++ b/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml @@ -45,6 +45,7 @@ properties: property if all ports have to be enabled. initial-mode: + $ref: /schemas/types.yaml#/definitions/uint32 enum: [1, 2] description: > Specifies initial mode. 1 for Hub mode, 2 for standby mode. -- 2.34.1

8 8

[PATCH V2] ASoC: fsl_xcvr:Fix unbalanced pm_runtime_enable in fsl_xcvr_probe
by zhangqilong 02 Jun '22

02 Jun '22

a) Add missing pm_runtime_disable() when probe error out. It could avoid pm_runtime implementation complains when removing and probing again the driver. b) Add remove for missing pm_runtime_disable(). v2: add remove to put PM usage counter. Fix:c590fa80b3928 ("ASoC: fsl_xcvr: register platform component before registering cpu dai") Signed-off-by: Zhang Qilong <zhangqilong3(a)huawei.com> --- sound/soc/fsl/fsl_xcvr.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/sound/soc/fsl/fsl_xcvr.c b/sound/soc/fsl/fsl_xcvr.c index d0556c79fdb1..55e640cba87d 100644 --- a/sound/soc/fsl/fsl_xcvr.c +++ b/sound/soc/fsl/fsl_xcvr.c @@ -1228,6 +1228,7 @@ static int fsl_xcvr_probe(struct platform_device *pdev) */ ret = devm_snd_dmaengine_pcm_register(dev, NULL, 0); if (ret) { + pm_runtime_disable(dev); dev_err(dev, "failed to pcm register\n"); return ret; } @@ -1235,6 +1236,7 @@ static int fsl_xcvr_probe(struct platform_device *pdev) ret = devm_snd_soc_register_component(dev, &fsl_xcvr_comp, &fsl_xcvr_dai, 1); if (ret) { + pm_runtime_disable(dev); dev_err(dev, "failed to register component %s\n", fsl_xcvr_comp.name); } @@ -1242,6 +1244,12 @@ static int fsl_xcvr_probe(struct platform_device *pdev) return ret; } +static int fsl_xcvr_remove(struct platform_device *pdev) +{ + pm_runtime_disable(&pdev->dev); + return 0; +} + static __maybe_unused int fsl_xcvr_runtime_suspend(struct device *dev) { struct fsl_xcvr *xcvr = dev_get_drvdata(dev); @@ -1370,6 +1378,7 @@ static struct platform_driver fsl_xcvr_driver = { .pm = &fsl_xcvr_pm_ops, .of_match_table = fsl_xcvr_dt_ids, }, + .remove = fsl_xcvr_remove, }; module_platform_driver(fsl_xcvr_driver); -- 2.31.1

2 1

soundwire: device drivers for PC based hardware
by Muni Sekhar 01 Jun '22

01 Jun '22

Hi all, I am looking for the soundwire device drivers which run on x86 CPU for PC based platforms. linux/drivers/soundwire at master · torvalds/linux · GitHub Can the above mentioned mainline tree drivers can be used for this purpose? config SOUNDWIRE_INTEL depends on ACPI && SND_SOC config SOUNDWIRE_QCOM depends on SND_SOC As per the Kconfig file, both the Intel and Qualcomm SoundWire Master driver depend on SND_SOC, does it mean it is only possible to run on SoC CPU(Arm chipsets)? -- Thanks, Sekhar

2 1

[PATCH] ASoC: Intel: cirrus-common: fix incorrect channel mapping
by Brent Lu 01 Jun '22

01 Jun '22

From: xliu <xiang.liu(a)cirrus.com> The default mapping of ASPRX1 Slot is left channel. Map the slots of right amplifiers (WR and TR) to right channel. Signed-off-by: xliu <xiang.liu(a)cirrus.com> Signed-off-by: Brent Lu <brent.lu(a)intel.com> --- sound/soc/intel/boards/sof_cirrus_common.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/sound/soc/intel/boards/sof_cirrus_common.c b/sound/soc/intel/boards/sof_cirrus_common.c index e71d74ec1b0b..64ca0e3991dc 100644 --- a/sound/soc/intel/boards/sof_cirrus_common.c +++ b/sound/soc/intel/boards/sof_cirrus_common.c @@ -107,6 +107,7 @@ static int cs35l41_hw_params(struct snd_pcm_substream *substream, struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); struct snd_soc_dai *codec_dai; int clk_freq, i, ret; + int rx_ch[2] = {1, 0}; clk_freq = sof_dai_get_bclk(rtd); /* BCLK freq */ @@ -134,6 +135,17 @@ static int cs35l41_hw_params(struct snd_pcm_substream *substream, ret); return ret; } + + /* Setup for R channel Slot: WR and TR */ + if (i % 2) { + ret = snd_soc_dai_set_channel_map(codec_dai, 0, NULL, + ARRAY_SIZE(rx_ch), rx_ch); + if (ret < 0) { + dev_err(codec_dai->dev, "fail to set channel map, ret %d\n", + ret); + return ret; + } + } } return 0; -- 2.25.1

3 2

[PATCH] ASoC: qcom: lpass-platform: Update VMA access permissions in mmap callback
by Srinivasa Rao Mandadapu 01 Jun '22

01 Jun '22

Replace page protection permissions from noncashed to writecombine, in lpass codec DMA path mmp callabck, to support 64 bit chromeOS. Avoid SIGBUS error in userspace caused by noncached permissions in 64 bit chromeOS. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam(a)quicinc.com> --- sound/soc/qcom/lpass-platform.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c index f03a7ae..b41ab7a 100644 --- a/sound/soc/qcom/lpass-platform.c +++ b/sound/soc/qcom/lpass-platform.c @@ -898,7 +898,7 @@ static int lpass_platform_cdc_dma_mmap(struct snd_pcm_substream *substream, struct snd_pcm_runtime *runtime = substream->runtime; unsigned long size, offset; - vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); size = vma->vm_end - vma->vm_start; offset = vma->vm_pgoff << PAGE_SHIFT; return io_remap_pfn_range(vma, vma->vm_start, -- 2.7.4

2 1

[PATCH 0/2] Add pinctrl support adsp based platforms
by Srinivasa Rao Mandadapu 01 Jun '22

01 Jun '22

This patch set is to add pinctrl support adsp enabled sc7280 platforms. Srinivasa Rao Mandadapu (2): dt-bindings: pinctrl: qcom: sc7280: Add compatible string for adsp based platforms pinctrl: qcom: sc7280: Add lpi pinctrl variant data structure for adsp based targets .../bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml | 4 +++- drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c | 14 ++++++++++++++ 2 files changed, 17 insertions(+), 1 deletion(-) -- 2.7.4

3 5