April 2022 - Alsa-devel - mailman.alsa-project.org

[PATCH v4 0/2] Let userspace know when snd-hda-intel needs i915
by Mauro Carvalho Chehab 30 Apr '22

30 Apr '22

Currently, kernel/module annotates module dependencies when request_symbol is used, but it doesn't cover more complex inter-driver dependencies that are subsystem and/or driver-specific. In the case of hdmi sound, depending on the CPU/GPU, sometimes the snd_hda_driver can talk directly with the hardware, but sometimes, it uses the i915 driver. When the snd_hda_driver uses i915, it should first be unbind/rmmod, as otherwise trying to unbind/rmmod the i915 driver cause driver issues, as as reported by CI tools with different GPU models: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6415/fi-tgl-1115g4/igt@core_ho… https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_11495/bat-adlm-1/igt@i915_m… In the past, just a few CPUs were doing such bindings, but this issue now applies to all "modern" Intel CPUs that have onboard graphics, as well as to the newer discrete GPUs. With the discrete GPU case, the HDA controller is physically separate and requires i915 to power on the hardware for all hardware access. In this case, the issue is hit basicly 100% of the time. With on-board graphics, i915 driver is needed only when the display codec is accessed. If i915 is unbind during runtime suspend, while snd-hda-intel is still bound, nothing bad happens, but unbinding i915 on other situations may also cause issues. So, add support at kernel/modules to allow snd-hda drivers to properly annotate when a dependency on a DRM driver dependencies exists, and add a call to such new function at the snd-hda driver when it successfully binds into the DRM driver. This would allow userspace tools to check and properly remove the audio driver before trying to remove or unbind the GPU driver. It should be noticed that this series conveys the hidden module dependencies. Other changes are needed in order to allow removing or unbinding the i915 driver while keeping the snd-hda-intel driver loaded/bound. With that regards, there are some discussions on how to improve this at alsa-devel a while back: https://mailman.alsa-project.org/pipermail/alsa-devel/2021-September/190099… So, future improvements on both in i915 and the audio drivers could be made. E.g. with discrete GPUs, it's the only codec of the card, so it seems feasible to detach the ALSA card if i915 is bound (using infra made for VGA switcheroo), but, until these improvements are done and land in upstream, audio drivers needs to be unbound if i915 driver goes unbind. Yet, even if such fixes got merged, this series is still needed, as it makes such dependencies more explicit and easier to debug. PS.: This series was generated against next-20220428. --- v4: - fix a compilation warning reported by Intel's Kernel robot when !CONFIG_MODULE_UNLOAD or !CONFIG_MODULE. v3: minor fixes: - fixed a checkpatch warning; - use a single line for the new function prototype. v2: - the dependencies are now handled directly at try_module_get(). Mauro Carvalho Chehab (2): module: update dependencies at try_module_get() ALSA: hda - identify when audio is provided by a video driver include/linux/module.h | 8 +++++--- kernel/module/main.c | 33 +++++++++++++++++++++++++++++++-- sound/hda/hdac_component.c | 2 +- 3 files changed, 37 insertions(+), 6 deletions(-) -- 2.35.1

1 2

how can i swich between sound card without reboot in archlinux
by GitHub issues - edited 30 Apr '22

30 Apr '22

alsa-project/alsa-utils issue #144 was edited from EN-KS: I use riverwm and kitty. Currently there is no sound output when i try to plugin a usb 2.4G wireless headset in and then use alsamixer F6 to select the usb sound card unless I leave the usb adapter on the machine and reboot. the usb sound card was detected tho, Is this what it suppose to be? or any procedure that I missed? Issue URL : https://github.com/alsa-project/alsa-utils/issues/144 Repository URL: https://github.com/alsa-project/alsa-utils

1 0

how can i swich between sound card without reboot in archlinux
by GitHub issues - opened 30 Apr '22

30 Apr '22

alsa-project/alsa-utils issue #144 was opened from EN-KS: currently there is no sound output when i try to plugin a usb 2.4G wireless headset in and then F6 to select the usb sound card unless I leave the usb adapter on the machine and reboot. the usb sound card was detected tho, Is this what it suppose to be? or any procedure that I missed? Issue URL : https://github.com/alsa-project/alsa-utils/issues/144 Repository URL: https://github.com/alsa-project/alsa-utils

1 0

[PATCH] conf: vc4-hdmi: use a proper hdmi pcm, fix broken default pcm
by Matthias Reichl 30 Apr '22

30 Apr '22

Userspace expects to see a HDMI pcm, so remove the somewhat broken front and iec958 pcms and add a proper hdmi pcm instead. The hdmi pcm supports HD/HBR audio passthrough and relays the IEC958 status bits on to the kernel driver so it can switch to HBR audio packets if needed. The control hook is marked optional because kernels before 5.14 didn't expose the IEC958 controls. The default pcm never worked as dmix doesn't support the iec958 format. So drop dmix, only use plug and softvol, and use the hdmi pcm for iec958 formatting. Signed-off-by: Matthias Reichl <hias(a)horus.com> --- src/conf/cards/vc4-hdmi.conf | 78 ++++++++++++++++++++++-------------- 1 file changed, 48 insertions(+), 30 deletions(-) diff --git a/src/conf/cards/vc4-hdmi.conf b/src/conf/cards/vc4-hdmi.conf index 027804a1..af87b3a8 100644 --- a/src/conf/cards/vc4-hdmi.conf +++ b/src/conf/cards/vc4-hdmi.conf @@ -3,36 +3,9 @@ # subframe conversion # -<confdir:pcm/front.conf> +<confdir:pcm/hdmi.conf> -vc4-hdmi.pcm.front.0 { - @args [ CARD ] - @args.CARD { - type string - } - type hw - card $CARD -} - -# default with dmix -vc4-hdmi.pcm.default { - @args [ CARD ] - @args.CARD { - type string - } - type asym - playback.pcm { - type plug - slave.pcm { - @func concat - strings [ "dmix:" $CARD ] - } - } -} - -<confdir:pcm/iec958.conf> - -vc4-hdmi.pcm.iec958.0 { +vc4-hdmi.pcm.hdmi.0 { @args [ CARD AES0 AES1 AES2 AES3 ] @args.CARD { type string @@ -53,12 +26,57 @@ vc4-hdmi.pcm.iec958.0 { slave { format IEC958_SUBFRAME_LE pcm { - type plug + type hooks slave.pcm { type hw card $CARD + device 0 + } + hooks.0 { + type ctl_elems + hook_args [ + { + name "IEC958 Playback Default" + interface PCM + optional true + lock true + preserve true + value [ $AES0 $AES1 $AES2 $AES3 ] + } + ] } } } status [ $AES0 $AES1 $AES2 $AES3 ] + hdmi_mode true +} + +# default with plug and softvol +vc4-hdmi.pcm.default { + @args [ CARD ] + @args.CARD { + type string + } + type asym + playback.pcm { + type plug + slave.pcm { + type softvol + slave.pcm { + @func concat + strings [ + "cards.vc4-hdmi.pcm.hdmi.0:" + "CARD=" $CARD "," + "AES0=0x04," # IEC958_AES0_CON_NOT_COPYRIGHT | IEC958_AES0_CON_EMPHASIS_NONE + "AES1=0x82," # IEC958_AES1_CON_ORIGINAL | IEC958_AES1_CON_PCM_CODER + "AES2=0x00," # IEC958_AES2_CON_SOURCE_UNSPEC | IEC958_AES2_CON_CHANNEL_UNSPEC + "AES3=0x01" # IEC958_AES3_CON_FS_NOTID (iec958 plugin will fill in actual rate) + ] + } + control { + name "PCM Playback Volume" + card $CARD + } + } + } } -- 2.30.2

1 0

[PATCH v2] ASoC: ti: davinci-mcasp: Add dma-type for bcdma
by Jai Luthra 29 Apr '22

29 Apr '22

From: Jayesh Choudhary <j-choudhary(a)ti.com> Set DMA type for ti-bcdma controller for AM62-SK. Signed-off-by: Jayesh Choudhary <j-choudhary(a)ti.com> Signed-off-by: Jai Luthra <j-luthra(a)ti.com> --- sound/soc/ti/davinci-mcasp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/ti/davinci-mcasp.c b/sound/soc/ti/davinci-mcasp.c index 2c146b91fca3..377be2e2b6ee 100644 --- a/sound/soc/ti/davinci-mcasp.c +++ b/sound/soc/ti/davinci-mcasp.c @@ -2047,6 +2047,8 @@ static int davinci_mcasp_get_dma_type(struct davinci_mcasp *mcasp) return PCM_SDMA; else if (strstr(tmp, "udmap")) return PCM_UDMA; + else if (strstr(tmp, "bcdma")) + return PCM_UDMA; return PCM_EDMA; } -- 2.17.1

2 1

[PATCH] soundwire: qcom: adjust autoenumeration timeout
by Srinivas Kandagatla 29 Apr '22

29 Apr '22

Currently timeout for autoenumeration during probe and bus reset is set to 2 secs which is really a big value. This can have an adverse effect on boot time if the slave device is not ready/reset. This was the case with wcd938x which was not reset yet but we spent 2 secs waiting in the soundwire controller probe. Reduce this time to 1/10 of Hz which should be good enough time to finish autoenumeration if any slaves are available on the bus. Reported-by: Srinivasa Rao Mandadapu <quic_srivasam(a)quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> --- drivers/soundwire/qcom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index da1ad7ebb1aa..432e5cb9a4d2 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -105,7 +105,7 @@ #define SWRM_SPECIAL_CMD_ID 0xF #define MAX_FREQ_NUM 1 -#define TIMEOUT_MS (2 * HZ) +#define TIMEOUT_MS (HZ/10) #define QCOM_SWRM_MAX_RD_LEN 0x1 #define QCOM_SDW_MAX_PORTS 14 #define DEFAULT_CLK_FREQ 9600000 -- 2.21.0

2 2

[PATCH 00/10] ASoC: SOF: IPC Abstraction for FW loading
by Ranjani Sridharan 29 Apr '22

29 Apr '22

This series introduces IPC abstraction for FW loading in the SOF driver in preparation for supporting the new IPC version in the SOF firmware. Peter Ujfalusi (10): ASoC: SOF: Introduce IPC dependent ops for firmware handling, loading ASoC: SOF: ipc3-loader: Implement firmware parsing and loading ASoC: SOF: ipc: Add check for fw_loader ops ASoC: SOF: loader: Switch to use the fw_loader ops ASoC: SOF: amd: renoir: Do not set the load_module ops ASoC: SOF: imx: Do not set the load_module ops ASoC: SOF: Intel: bdw/byt/pci-tng: Do not set the load_module ops ASoC: SOF: mediatek: mt8195: Do not set the load_module ops ASoC: SOF: loader: Remove snd_sof_parse_module_memcpy() as it is not used ASoC: SOF: loader: Call optional query_fw_configuration on first boot sound/soc/sof/Makefile | 2 +- sound/soc/sof/amd/renoir.c | 3 - sound/soc/sof/imx/imx8.c | 6 +- sound/soc/sof/imx/imx8m.c | 3 +- sound/soc/sof/intel/bdw.c | 3 - sound/soc/sof/intel/byt.c | 6 - sound/soc/sof/intel/pci-tng.c | 3 - sound/soc/sof/ipc.c | 57 +-- sound/soc/sof/ipc3-loader.c | 416 ++++++++++++++++++++++ sound/soc/sof/ipc3-priv.h | 24 ++ sound/soc/sof/ipc3.c | 62 +++- sound/soc/sof/loader.c | 471 +------------------------ sound/soc/sof/mediatek/mt8195/mt8195.c | 2 - sound/soc/sof/sof-priv.h | 24 +- 14 files changed, 539 insertions(+), 543 deletions(-) create mode 100644 sound/soc/sof/ipc3-loader.c create mode 100644 sound/soc/sof/ipc3-priv.h -- 2.25.1

2 11

[PATCH] ASoC: hdmi-codec: Add option for ELD bypass
by Sugar Zhang 29 Apr '22

29 Apr '22

This patch allow users to enable "ELD Bypass" who don't care anything from EDID Link Data. Currently, this driver gets ELD(from EDID) to constraint channels and rates. Unfortunately, EDID is not always valid, maybe caused by the fragile HDMI port or cable, in this situation, the max features are limited to 48kHz stereo. So, add this option to allow user to select the manual way to output audio as expected. such as multi-channels LPCM(7.1), or HBR bitstream for these sink devices. Signed-off-by: Sugar Zhang <sugar.zhang(a)rock-chips.com> --- sound/soc/codecs/hdmi-codec.c | 44 +++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 42 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c index b07607a..3b78aa8 100644 --- a/sound/soc/codecs/hdmi-codec.c +++ b/sound/soc/codecs/hdmi-codec.c @@ -275,6 +275,7 @@ struct hdmi_codec_priv { unsigned int chmap_idx; struct mutex lock; bool busy; + bool eld_bypass; struct snd_soc_jack *jack; unsigned int jack_status; u8 iec_status[AES_IEC958_STATUS_SIZE]; @@ -427,6 +428,44 @@ static int hdmi_codec_iec958_mask_get(struct snd_kcontrol *kcontrol, return 0; } +static int hdmi_codec_eld_bypass_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + + return 0; +} + +static int hdmi_codec_eld_bypass_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_kcontrol_chip(kcontrol); + struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component); + + ucontrol->value.integer.value[0] = hcp->eld_bypass; + + return 0; +} + +static int hdmi_codec_eld_bypass_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_kcontrol_chip(kcontrol); + struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component); + + hcp->eld_bypass = ucontrol->value.integer.value[0]; + + return 0; +} + +#define HDMI_CODEC_ELD_BYPASS_DECL(xname) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ + .info = hdmi_codec_eld_bypass_info, .get = hdmi_codec_eld_bypass_get, \ + .put = hdmi_codec_eld_bypass_put, } + static int hdmi_codec_startup(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { @@ -447,7 +486,7 @@ static int hdmi_codec_startup(struct snd_pcm_substream *substream, goto err; } - if (tx && hcp->hcd.ops->get_eld) { + if (tx && !hcp->eld_bypass && hcp->hcd.ops->get_eld) { ret = hcp->hcd.ops->get_eld(dai->dev->parent, hcp->hcd.data, hcp->eld, sizeof(hcp->eld)); if (ret) @@ -770,6 +809,7 @@ static struct snd_kcontrol_new hdmi_codec_controls[] = { .info = hdmi_eld_ctl_info, .get = hdmi_eld_ctl_get, }, + HDMI_CODEC_ELD_BYPASS_DECL("ELD Bypass"), }; static int hdmi_codec_pcm_new(struct snd_soc_pcm_runtime *rtd, @@ -854,7 +894,7 @@ static void plugged_cb(struct device *dev, bool plugged) struct hdmi_codec_priv *hcp = dev_get_drvdata(dev); if (plugged) { - if (hcp->hcd.ops->get_eld) { + if (!hcp->eld_bypass && hcp->hcd.ops->get_eld) { hcp->hcd.ops->get_eld(dev->parent, hcp->hcd.data, hcp->eld, sizeof(hcp->eld)); } -- 2.7.4

2 2

[PATCH v4] dt-bindings: dsp: mediatek: add mt8195 dsp document
by YC Hung 29 Apr '22

29 Apr '22

From: "YC Hung" <yc.hung(a)mediatek.com> This patch adds mt8195 dsp document. The dsp is used for Sound Open Firmware driver node. It includes registers, clocks, memory regions, and mailbox for dsp. Signed-off-by: yc.hung <yc.hung(a)mediatek.com> --- Changes since v3: Fix patch v3 error : v3 only provide difference between v3 and v2. Changes since v2: Remove useless watchdog interrupt. Add commit message more detail description. Changes since v1: Rename yaml file name as mediatek,mt8195-dsp.yaml Refine descriptions for mailbox, memory-region and drop unused labels in examples. --- .../bindings/dsp/mediatek,mt8195-dsp.yaml | 105 ++++++++++++++++++ 1 file changed, 105 insertions(+) create mode 100644 Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml diff --git a/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml b/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml new file mode 100644 index 000000000000..b7e68b0dfa13 --- /dev/null +++ b/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dsp/mediatek,mt8195-dsp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek mt8195 DSP core + +maintainers: + - YC Hung <yc.hung(a)mediatek.com> + +description: | + Some boards from mt8195 contain a DSP core used for + advanced pre- and post- audio processing. + +properties: + compatible: + const: mediatek,mt8195-dsp + + reg: + items: + - description: Address and size of the DSP Cfg registers + - description: Address and size of the DSP SRAM + + reg-names: + items: + - const: cfg + - const: sram + + clocks: + items: + - description: mux for audio dsp clock + - description: 26M clock + - description: mux for audio dsp local bus + - description: default audio dsp local bus clock source + - description: clock gate for audio dsp clock + - description: mux for audio dsp access external bus + + clock-names: + items: + - const: adsp_sel + - const: clk26m_ck + - const: audio_local_bus + - const: mainpll_d7_d2 + - const: scp_adsp_audiodsp + - const: audio_h + + power-domains: + maxItems: 1 + + mboxes: + items: + - description: ipc reply between host and audio DSP. + - description: ipc request between host and audio DSP. + + mbox-names: + items: + - const: mbox0 + - const: mbox1 + + memory-region: + items: + - description: dma buffer between host and DSP. + - description: DSP system memory. + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - memory-region + - power-domains + - mbox-names + - mboxes + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + dsp@10803000 { + compatible = "mediatek,mt8195-dsp"; + reg = <0x10803000 0x1000>, + <0x10840000 0x40000>; + reg-names = "cfg", "sram"; + clocks = <&topckgen 10>, //CLK_TOP_ADSP + <&clk26m>, + <&topckgen 107>, //CLK_TOP_AUDIO_LOCAL_BUS + <&topckgen 136>, //CLK_TOP_MAINPLL_D7_D2 + <&scp_adsp 0>, //CLK_SCP_ADSP_AUDIODSP + <&topckgen 34>; //CLK_TOP_AUDIO_H + clock-names = "adsp_sel", + "clk26m_ck", + "audio_local_bus", + "mainpll_d7_d2", + "scp_adsp_audiodsp", + "audio_h"; + memory-region = <&adsp_dma_mem_reserved>, + <&adsp_mem_reserved>; + power-domains = <&spm 6>; //MT8195_POWER_DOMAIN_ADSP + mbox-names = "mbox0", "mbox1"; + mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>; + }; -- 2.18.0

4 6

[PATCH 11/37] sound: add HAS_IOPORT dependencies
by Niklas Schnelle 29 Apr '22

29 Apr '22

In a future patch HAS_IOPORT=n will result in inb()/outb() and friends not being declared. We thus need to add HAS_IOPORT as dependency for those drivers using them. Co-developed-by: Arnd Bergmann <arnd(a)kernel.org> Signed-off-by: Niklas Schnelle <schnelle(a)linux.ibm.com> --- sound/drivers/Kconfig | 5 +++++ sound/pci/Kconfig | 45 ++++++++++++++++++++++++++++++++----------- 2 files changed, 39 insertions(+), 11 deletions(-) diff --git a/sound/drivers/Kconfig b/sound/drivers/Kconfig index ca4cdf666f82..4d250e619786 100644 --- a/sound/drivers/Kconfig +++ b/sound/drivers/Kconfig @@ -1,10 +1,12 @@ # SPDX-License-Identifier: GPL-2.0-only config SND_MPU401_UART tristate + depends on HAS_IOPORT select SND_RAWMIDI config SND_OPL3_LIB tristate + depends on HAS_IOPPORT select SND_TIMER select SND_HWDEP select SND_SEQ_DEVICE if SND_SEQUENCER != n @@ -128,6 +130,7 @@ config SND_VIRMIDI config SND_MTPAV tristate "MOTU MidiTimePiece AV multiport MIDI" + depends on HAS_IOPORT select SND_RAWMIDI help To use a MOTU MidiTimePiece AV multiport MIDI adapter @@ -152,6 +155,7 @@ config SND_MTS64 config SND_SERIAL_U16550 tristate "UART16550 serial MIDI driver" + depends on HAS_IOPORT select SND_RAWMIDI help To include support for MIDI serial port interfaces, say Y here @@ -167,6 +171,7 @@ config SND_SERIAL_U16550 config SND_MPU401 tristate "Generic MPU-401 UART driver" + depends on HAS_IOPORT select SND_MPU401_UART help Say Y here to include support for MIDI ports compatible with diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig index a55836225401..51c1f38530f6 100644 --- a/sound/pci/Kconfig +++ b/sound/pci/Kconfig @@ -26,7 +26,7 @@ config SND_ALS300 select SND_PCM select SND_AC97_CODEC select SND_OPL3_LIB - depends on ZONE_DMA + depends on ZONE_DMA && HAS_IOPORT help Say 'Y' or 'M' to include support for Avance Logic ALS300/ALS300+ @@ -51,7 +51,7 @@ config SND_ALI5451 tristate "ALi M5451 PCI Audio Controller" select SND_MPU401_UART select SND_AC97_CODEC - depends on ZONE_DMA + depends on ZONE_DMA && HAS_IOPORT help Say Y here to include support for the integrated AC97 sound device on motherboards using the ALi M5451 Audio Controller @@ -96,6 +96,7 @@ config SND_ATIIXP_MODEM config SND_AU8810 tristate "Aureal Advantage" + depends on HAS_IOPORT select SND_MPU401_UART select SND_AC97_CODEC help @@ -110,6 +111,7 @@ config SND_AU8810 config SND_AU8820 tristate "Aureal Vortex" + depends on HAS_IOPORT select SND_MPU401_UART select SND_AC97_CODEC help @@ -123,6 +125,7 @@ config SND_AU8820 config SND_AU8830 tristate "Aureal Vortex 2" + depends on HAS_IOPORT select SND_MPU401_UART select SND_AC97_CODEC help @@ -157,7 +160,7 @@ config SND_AZT3328 select SND_RAWMIDI select SND_AC97_CODEC select SND_TIMER - depends on ZONE_DMA + depends on ZONE_DMA && HAS_IOPORT help Say Y here to include support for Aztech AZF3328 (PCI168) soundcards. @@ -193,6 +196,7 @@ config SND_BT87X_OVERCLOCK config SND_CA0106 tristate "SB Audigy LS / Live 24bit" + depends on HAS_IOPORT select SND_AC97_CODEC select SND_RAWMIDI select SND_VMASTER @@ -205,6 +209,7 @@ config SND_CA0106 config SND_CMIPCI tristate "C-Media 8338, 8738, 8768, 8770" + depends on HAS_IOPORT select SND_OPL3_LIB select SND_MPU401_UART select SND_PCM @@ -221,6 +226,7 @@ config SND_OXYGEN_LIB config SND_OXYGEN tristate "C-Media 8786, 8787, 8788 (Oxygen)" + depends on HAS_IOPORT select SND_OXYGEN_LIB select SND_PCM select SND_MPU401_UART @@ -246,6 +252,7 @@ config SND_OXYGEN config SND_CS4281 tristate "Cirrus Logic (Sound Fusion) CS4281" + depends on HAS_IOPORT select SND_OPL3_LIB select SND_RAWMIDI select SND_AC97_CODEC @@ -257,6 +264,7 @@ config SND_CS4281 config SND_CS46XX tristate "Cirrus Logic (Sound Fusion) CS4280/CS461x/CS462x/CS463x" + depends on HAS_IOPORT select SND_RAWMIDI select SND_AC97_CODEC select FW_LOADER @@ -290,6 +298,7 @@ config SND_CS5530 config SND_CS5535AUDIO tristate "CS5535/CS5536 Audio" depends on X86_32 || MIPS || COMPILE_TEST + depends on HAS_IOPORT select SND_PCM select SND_AC97_CODEC help @@ -307,6 +316,7 @@ config SND_CS5535AUDIO config SND_CTXFI tristate "Creative Sound Blaster X-Fi" + depends on HAS_IOPORT select SND_PCM help If you want to use soundcards based on Creative Sound Blastr X-Fi @@ -462,13 +472,14 @@ config SND_INDIGODJX config SND_EMU10K1 tristate "Emu10k1 (SB Live!, Audigy, E-mu APS)" + depends on HAS_IOPORT select FW_LOADER select SND_HWDEP select SND_RAWMIDI select SND_AC97_CODEC select SND_TIMER select SND_SEQ_DEVICE if SND_SEQUENCER != n - depends on ZONE_DMA + depends on ZONE_DMA && HAS_IOPORT help Say Y to include support for Sound Blaster PCI 512, Live!, Audigy and E-mu APS (partially supported) soundcards. @@ -491,7 +502,7 @@ config SND_EMU10K1X tristate "Emu10k1X (Dell OEM Version)" select SND_AC97_CODEC select SND_RAWMIDI - depends on ZONE_DMA + depends on ZONE_DMA && HAS_IOPORT help Say Y here to include support for the Dell OEM version of the Sound Blaster Live!. @@ -501,6 +512,7 @@ config SND_EMU10K1X config SND_ENS1370 tristate "(Creative) Ensoniq AudioPCI 1370" + depends on HAS_IOPORT select SND_RAWMIDI select SND_PCM help @@ -511,6 +523,7 @@ config SND_ENS1370 config SND_ENS1371 tristate "(Creative) Ensoniq AudioPCI 1371/1373" + depends on HAS_IOPORT select SND_RAWMIDI select SND_AC97_CODEC help @@ -525,7 +538,7 @@ config SND_ES1938 select SND_OPL3_LIB select SND_MPU401_UART select SND_AC97_CODEC - depends on ZONE_DMA + depends on ZONE_DMA && HAS_IOPORT help Say Y here to include support for soundcards based on ESS Solo-1 (ES1938, ES1946, ES1969) chips. @@ -537,7 +550,7 @@ config SND_ES1968 tristate "ESS ES1968/1978 (Maestro-1/2/2E)" select SND_MPU401_UART select SND_AC97_CODEC - depends on ZONE_DMA + depends on ZONE_DMA && HAS_IOPORT help Say Y here to include support for soundcards based on ESS Maestro 1/2/2E chips. @@ -569,6 +582,7 @@ config SND_ES1968_RADIO config SND_FM801 tristate "ForteMedia FM801" + depends on HAS_IOPORT select SND_OPL3_LIB select SND_MPU401_UART select SND_AC97_CODEC @@ -624,7 +638,7 @@ config SND_ICE1712 select SND_MPU401_UART select SND_AC97_CODEC select BITREVERSE - depends on ZONE_DMA + depends on ZONE_DMA && HAS_IOPORT help Say Y here to include support for soundcards based on the ICE1712 (Envy24) chip. @@ -640,6 +654,7 @@ config SND_ICE1712 config SND_ICE1724 tristate "ICE/VT1724/1720 (Envy24HT/PT)" + depends on HAS_IOPORT select SND_RAWMIDI select SND_AC97_CODEC select SND_VMASTER @@ -712,7 +727,7 @@ config SND_LX6464ES config SND_MAESTRO3 tristate "ESS Allegro/Maestro3" select SND_AC97_CODEC - depends on ZONE_DMA + depends on ZONE_DMA && HAS_IOPORT help Say Y here to include support for soundcards based on ESS Maestro 3 (Allegro) chips. @@ -753,6 +768,7 @@ config SND_NM256 config SND_PCXHR tristate "Digigram PCXHR" + depends on HAS_IOPORT select FW_LOADER select SND_PCM select SND_HWDEP @@ -764,6 +780,7 @@ config SND_PCXHR config SND_RIPTIDE tristate "Conexant Riptide" + depends on HAS_IOPORT select FW_LOADER select SND_OPL3_LIB select SND_MPU401_UART @@ -808,6 +825,7 @@ config SND_RME9652 config SND_SE6X tristate "Studio Evolution SE6X" depends on SND_OXYGEN=n && SND_VIRTUOSO=n # PCI ID conflict + depends on HAS_IOPORT select SND_OXYGEN_LIB select SND_PCM select SND_MPU401_UART @@ -830,7 +848,7 @@ config SND_SONICVIBES select SND_OPL3_LIB select SND_MPU401_UART select SND_AC97_CODEC - depends on ZONE_DMA + depends on ZONE_DMA && HAS_IOPORT help Say Y here to include support for soundcards based on the S3 SonicVibes chip. @@ -842,7 +860,7 @@ config SND_TRIDENT tristate "Trident 4D-Wave DX/NX; SiS 7018" select SND_MPU401_UART select SND_AC97_CODEC - depends on ZONE_DMA + depends on ZONE_DMA && HAS_IOPORT help Say Y here to include support for soundcards based on Trident 4D-Wave DX/NX or SiS 7018 chips. @@ -852,6 +870,7 @@ config SND_TRIDENT config SND_VIA82XX tristate "VIA 82C686A/B, 8233/8235 AC97 Controller" + depends on HAS_IOPORT select SND_MPU401_UART select SND_AC97_CODEC help @@ -863,6 +882,7 @@ config SND_VIA82XX config SND_VIA82XX_MODEM tristate "VIA 82C686A/B, 8233 based Modems" + depends on HAS_IOPORT select SND_AC97_CODEC help Say Y here to include support for the integrated MC97 modem on @@ -873,6 +893,7 @@ config SND_VIA82XX_MODEM config SND_VIRTUOSO tristate "Asus Virtuoso 66/100/200 (Xonar)" + depends on HAS_IOPORT select SND_OXYGEN_LIB select SND_PCM select SND_MPU401_UART @@ -889,6 +910,7 @@ config SND_VIRTUOSO config SND_VX222 tristate "Digigram VX222" + depends on HAS_IOPORT select SND_VX_LIB help Say Y here to include support for Digigram VX222 soundcards. @@ -898,6 +920,7 @@ config SND_VX222 config SND_YMFPCI tristate "Yamaha YMF724/740/744/754" + depends on HAS_IOPORT select SND_OPL3_LIB select SND_MPU401_UART select SND_AC97_CODEC -- 2.32.0

1 1