April 2022 - Alsa-devel - mailman.alsa-project.org

[PATCH v5 0/2] Let userspace know when snd-hda-intel needs i915
by Mauro Carvalho Chehab 09 May '22

09 May '22

Currently, kernel/module annotates module dependencies when request_symbol is used, but it doesn't cover more complex inter-driver dependencies that are subsystem and/or driver-specific. In the case of hdmi sound, depending on the CPU/GPU, sometimes the snd_hda_driver can talk directly with the hardware, but sometimes, it uses the i915 driver. When the snd_hda_driver uses i915, it should first be unbind/rmmod, as otherwise trying to unbind/rmmod the i915 driver cause driver issues, as as reported by CI tools with different GPU models: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6415/fi-tgl-1115g4/igt@core_ho… https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_11495/bat-adlm-1/igt@i915_m… In the past, just a few CPUs were doing such bindings, but this issue now applies to all "modern" Intel CPUs that have onboard graphics, as well as to the newer discrete GPUs. With the discrete GPU case, the HDA controller is physically separate and requires i915 to power on the hardware for all hardware access. In this case, the issue is hit basicly 100% of the time. With on-board graphics, i915 driver is needed only when the display codec is accessed. If i915 is unbind during runtime suspend, while snd-hda-intel is still bound, nothing bad happens, but unbinding i915 on other situations may also cause issues. So, add support at kernel/modules to allow snd-hda drivers to properly annotate when a dependency on a DRM driver dependencies exists, and add a call to such new function at the snd-hda driver when it successfully binds into the DRM driver. This would allow userspace tools to check and properly remove the audio driver before trying to remove or unbind the GPU driver. It should be noticed that this series conveys the hidden module dependencies. Other changes are needed in order to allow removing or unbinding the i915 driver while keeping the snd-hda-intel driver loaded/bound. With that regards, there are some discussions on how to improve this at alsa-devel a while back: https://mailman.alsa-project.org/pipermail/alsa-devel/2021-September/190099… So, future improvements on both in i915 and the audio drivers could be made. E.g. with discrete GPUs, it's the only codec of the card, so it seems feasible to detach the ALSA card if i915 is bound (using infra made for VGA switcheroo), but, until these improvements are done and land in upstream, audio drivers needs to be unbound if i915 driver goes unbind. Yet, even if such fixes got merged, this series is still needed, as it makes such dependencies more explicit and easier to debug. PS.: This series was generated against next-20220428. --- v5: - while v4 works fine, it ends calling try_module_format() recursively, which is not what it it was supposed to do. So, change the logic to avoid such recursion, by adding a static __try_module_format() and renaming the new version that takes two arguments as try_module_format_owner(). v4: - fix a compilation warning reported by Intel's Kernel robot when !CONFIG_MODULE_UNLOAD or !CONFIG_MODULE. v3: minor fixes: - fixed a checkpatch warning; - use a single line for the new function prototype. v2: - the dependencies are now handled directly at try_module_get(). Mauro Carvalho Chehab (2): module: update dependencies at try_module_get() ALSA: hda - identify when audio is provided by a video driver include/linux/module.h | 8 +++-- kernel/module/main.c | 65 ++++++++++++++++++++++++++++++-------- sound/hda/hdac_component.c | 2 +- 3 files changed, 57 insertions(+), 18 deletions(-) -- 2.35.1

3 4

[PATCH 0/5] soundwire: use pm_runtime_resume_and_get()
by Bard Liao 09 May '22

09 May '22

Use pm_runtime_resume_and_get() to replace the pm_runtime_get_sync() and pm_runtime_put_noidle() pattern. Pierre-Louis Bossart (5): soundwire: qcom: return error when pm_runtime_get_sync fails soundwire: bus: use pm_runtime_resume_and_get() soundwire: cadence: use pm_runtime_resume_and_get() soundwire: intel: use pm_runtime_resume_and_get() soundwire: qcom: use pm_runtime_resume_and_get() drivers/soundwire/bus.c | 15 +++++---------- drivers/soundwire/cadence_master.c | 5 ++--- drivers/soundwire/intel.c | 5 ++--- drivers/soundwire/qcom.c | 17 ++++++++--------- 4 files changed, 17 insertions(+), 25 deletions(-) -- 2.25.1

3 8

[PATCH 0/3] soundwire: pm runtime improvements
by Bard Liao 09 May '22

09 May '22

This series provides a solution to solve a corner case issue where the manager device may become pm_runtime active, but without ALSA/ASoC requesting any functionality from the peripherals. In this case, the hardware peripheral device will report as ATTACHED and its initialization routine will be executed. If this initialization routine initiates any sort of deferred processing, there is a possibility that the manager could suspend without the peripheral suspend sequence being invoked: from the pm_runtime framework perspective, the peripheral is *already* suspended. Pierre-Louis Bossart (3): soundwire: intel: prevent pm_runtime resume prior to system suspend soundwire: intel: disable WAKEEN in pm_runtime resume soundwire: bus: pm_runtime_request_resume on peripheral attachment drivers/soundwire/bus.c | 12 ++++++++++++ drivers/soundwire/intel.c | 6 ++++++ 2 files changed, 18 insertions(+) -- 2.17.1

2 4

[PATCH] soundwire: cadence: recheck device0 attachment after status change
by Bard Liao 09 May '22

09 May '22

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> This patch adds a status check after device0 attachment to solve race conditions observed during attachment with multiple devices per link The sequence is the following 1) deviceA attaches as device0 2) the hardware detects a device0 status change and throws an interrupt. 3) the interrupt handler schedules the work function 4) the workqueue starts, we read the status slave0 = cdns_readl(cdns, CDNS_MCP_SLAVE_INTSTAT0); slave1 = cdns_readl(cdns, CDNS_MCP_SLAVE_INTSTAT1); we deal with the status change and program deviceA device number to a non-zero value. 5) deviceB attaches as device0, the device0 status seen by the hardware does not change. 6) we clear the CDNS_MCP_SLAVE_INTSTAT0/1 registers -> we will never detect deviceB! This patch suggest re-checking in a loop the device0 status with a PING frame, i.e. using the real device0 status instead of information on status changes. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Rander Wang <rander.wang(a)intel.com> Signed-off-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> --- drivers/soundwire/cadence_master.c | 37 ++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c index 558390af44b6..47d59190a96e 100644 --- a/drivers/soundwire/cadence_master.c +++ b/drivers/soundwire/cadence_master.c @@ -959,6 +959,8 @@ static void cdns_update_slave_status_work(struct work_struct *work) container_of(work, struct sdw_cdns, work); u32 slave0, slave1; u64 slave_intstat; + u32 device0_status; + int retry_count = 0; slave0 = cdns_readl(cdns, CDNS_MCP_SLAVE_INTSTAT0); slave1 = cdns_readl(cdns, CDNS_MCP_SLAVE_INTSTAT1); @@ -968,10 +970,45 @@ static void cdns_update_slave_status_work(struct work_struct *work) dev_dbg_ratelimited(cdns->dev, "Slave status change: 0x%llx\n", slave_intstat); +update_status: cdns_update_slave_status(cdns, slave_intstat); cdns_writel(cdns, CDNS_MCP_SLAVE_INTSTAT0, slave0); cdns_writel(cdns, CDNS_MCP_SLAVE_INTSTAT1, slave1); + /* + * When there is more than one peripheral per link, it's + * possible that a deviceB becomes attached after we deal with + * the attachment of deviceA. Since the hardware does a + * logical AND, the attachment of the second device does not + * change the status seen by the driver. + * + * In that case, clearing the registers above would result in + * the deviceB never being detected - until a change of status + * is observed on the bus. + * + * To avoid this race condition, re-check if any device0 needs + * attention with PING commands. There is no need to check for + * ALERTS since they are not allowed until a non-zero + * device_number is assigned. + */ + + device0_status = cdns_readl(cdns, CDNS_MCP_SLAVE_STAT); + device0_status &= 3; + + if (device0_status == SDW_SLAVE_ATTACHED) { + if (retry_count++ < SDW_MAX_DEVICES) { + dev_dbg_ratelimited(cdns->dev, + "Device0 detected after clearing status, iteration %d\n", + retry_count); + slave_intstat = CDNS_MCP_SLAVE_INTSTAT_ATTACHED; + goto update_status; + } else { + dev_err_ratelimited(cdns->dev, + "Device0 detected after %d iterations\n", + retry_count); + } + } + /* clear and unmask Slave interrupt now */ cdns_writel(cdns, CDNS_MCP_INTSTAT, CDNS_MCP_INT_SLAVE_MASK); cdns_updatel(cdns, CDNS_MCP_INTMASK, -- 2.17.1

2 1

[PATCH] ALSA: hda/realtek: Add quirk for Dell Latitude 7520
by gabriele.mzt＠gmail.com 08 May '22

08 May '22

From: Gabriele Mazzotta <gabriele.mzt(a)gmail.com> This fixes the pop noises that can be heard at boot time if the headphone jack is plugged in or when inserting/removing the jack. Signed-off-by: Gabriele Mazzotta <gabriele.mzt(a)gmail.com> --- sound/pci/hda/patch_realtek.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 62fbf3772b41..fa9878daa3bb 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6780,6 +6780,23 @@ static void alc256_fixup_mic_no_presence_and_resume(struct hda_codec *codec, } } +static void alc_fixup_dell4_mic_vref(struct hda_codec *codec, + const struct hda_fixup *fix, + int action) +{ + switch (action) { + case HDA_FIXUP_ACT_PRE_PROBE: + /** + * Set the vref of pin 0x19 (Headset Mic) and pin 0x1b (Headphone Mic) + * to Hi-Z to avoid pop noises at startup and when plugging and + * unplugging headphones/speakers. + */ + snd_hda_codec_set_pin_target(codec, 0x19, PIN_VREFHIZ); + snd_hda_codec_set_pin_target(codec, 0x1b, PIN_VREFHIZ); + break; + } +} + enum { ALC269_FIXUP_GPIO2, ALC269_FIXUP_SONY_VAIO, @@ -7011,6 +7028,7 @@ enum { ALC245_FIXUP_CS35L41_SPI_4, ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED, ALC285_FIXUP_HP_SPEAKERS_MICMUTE_LED, + ALC269_FIXUP_DELL4_MIC_NO_PRESENCE_VREF, }; static const struct hda_fixup alc269_fixups[] = { @@ -8799,6 +8817,12 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC285_FIXUP_HP_MUTE_LED, }, + [ALC269_FIXUP_DELL4_MIC_NO_PRESENCE_VREF] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc_fixup_dell4_mic_vref, + .chained = true, + .chain_id = ALC269_FIXUP_DELL4_MIC_NO_PRESENCE, + }, }; static const struct snd_pci_quirk alc269_fixup_tbl[] = { @@ -8889,6 +8913,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x09bf, "Dell Precision", ALC233_FIXUP_ASUS_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x0a2e, "Dell", ALC236_FIXUP_DELL_AIO_HEADSET_MIC), SND_PCI_QUIRK(0x1028, 0x0a30, "Dell", ALC236_FIXUP_DELL_AIO_HEADSET_MIC), + SND_PCI_QUIRK(0x1028, 0x0a38, "Dell Latitude 7520", ALC269_FIXUP_DELL4_MIC_NO_PRESENCE_VREF), SND_PCI_QUIRK(0x1028, 0x0a58, "Dell", ALC255_FIXUP_DELL_HEADSET_MIC), SND_PCI_QUIRK(0x1028, 0x0a61, "Dell XPS 15 9510", ALC289_FIXUP_DUAL_SPK), SND_PCI_QUIRK(0x1028, 0x0a62, "Dell Precision 5560", ALC289_FIXUP_DUAL_SPK), -- 2.36.0

3 2

[PATCH] ALSA: hda - fix unused Realtek function when PM is not enabled
by Randy Dunlap 08 May '22

08 May '22

When CONFIG_PM is not enabled, alc_shutup() is not needed, so move it inside the #ifdef CONFIG_PM guard. Also drop some contiguous #endif / #ifdef CONFIG_PM for simplicity. Fixes this build warning: sound/pci/hda/patch_realtek.c:886:20: warning: unused function 'alc_shutup' Fixes: 08c189f2c552 ("ALSA: hda - Use generic parser codes for Realtek driver") Signed-off-by: Randy Dunlap <rdunlap(a)infradead.org> Reported-by: kernel test robot <lkp(a)intel.com> Cc: Takashi Iwai <tiwai(a)suse.de> Cc: Jaroslav Kysela <perex(a)perex.cz> Cc: alsa-devel(a)alsa-project.org --- sound/pci/hda/patch_realtek.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -937,6 +937,9 @@ static int alc_init(struct hda_codec *co return 0; } +#define alc_free snd_hda_gen_free + +#ifdef CONFIG_PM static inline void alc_shutup(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; @@ -950,9 +953,6 @@ static inline void alc_shutup(struct hda alc_shutup_pins(codec); } -#define alc_free snd_hda_gen_free - -#ifdef CONFIG_PM static void alc_power_eapd(struct hda_codec *codec) { alc_auto_setup_eapd(codec, false); @@ -966,9 +966,7 @@ static int alc_suspend(struct hda_codec spec->power_hook(codec); return 0; } -#endif -#ifdef CONFIG_PM static int alc_resume(struct hda_codec *codec) { struct alc_spec *spec = codec->spec;

2 1

[GIT PULL] ASoC fixes for v5.18-rc4
by Mark Brown 08 May '22

08 May '22

The following changes since commit 5b933c7262c5b0ea11ea3c3b3ea81add04895954: firmware: cs_dsp: Fix overrun of unterminated control name string (2022-04-12 17:57:04 +0100) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git tags/asoc-fix-v5.18-rc4 for you to fetch changes up to c61711c1c95791850be48dd65a1d72eb34ba719f: ASoC: SOF: Fix NULL pointer exception in sof_pci_probe callback (2022-04-27 14:15:21 +0100) ---------------------------------------------------------------- ASoC: Fixes for v5.18 A larger collection of fixes than I'd like, mainly because mixer-test is making it's way into the CI systems and turning up issues on a wider range of systems. The most substantial thing though is a revert and an alternative fix for a dmaengine issue where the fix caused disruption for some other configurations, the core fix is backed out an a driver specific thing done instead. ---------------------------------------------------------------- Ajit Kumar Pandey (1): ASoC: SOF: Fix NULL pointer exception in sof_pci_probe callback ChiYuan Huang (1): ASoC: rt9120: Correct the reg 0x09 size to one byte Codrin Ciubotariu (2): ASoC: atmel: mchp-pdmc: set prepare_slave_config ASoC: dmaengine: Restore NULL prepare_slave_config() callback Mark Brown (8): ASoC: wm8958: Fix change notifications for DSP controls ASoC: da7219: Fix change notifications for tone generator frequency ASoC: meson: Fix event generation for AUI ACODEC mux ASoC: meson: Fix event generation for AUI CODEC mux ASoC: meson: Fix event generation for G12A tohdmi mux ASoC: max98090: Reject invalid values in custom control put() ASoC: max98090: Generate notifications on changes for custom control ASoC: ops: Validate input values in snd_soc_put_volsw_range() Neil Armstrong (2): ASoC: meson: axg-tdm-interface: Fix formatters in trigger" ASoC: meson: axg-card: Fix nonatomic links Olivier Moysan (1): ASoC: simple-card-utils: fix sysclk shutdown Pierre-Louis Bossart (1): ASoC: soc-ops: fix error handling sound/soc/atmel/mchp-pdmc.c | 1 + sound/soc/codecs/da7219.c | 14 ++++++++++---- sound/soc/codecs/max98090.c | 5 ++++- sound/soc/codecs/rt9120.c | 1 - sound/soc/codecs/wm8958-dsp2.c | 8 ++++---- sound/soc/generic/simple-card-utils.c | 2 +- sound/soc/meson/aiu-acodec-ctrl.c | 2 +- sound/soc/meson/aiu-codec-ctrl.c | 2 +- sound/soc/meson/axg-card.c | 1 - sound/soc/meson/axg-tdm-interface.c | 26 +++++--------------------- sound/soc/meson/g12a-tohdmitx.c | 2 +- sound/soc/soc-generic-dmaengine-pcm.c | 6 +++--- sound/soc/soc-ops.c | 20 ++++++++++++++++++-- sound/soc/sof/sof-pci-dev.c | 5 +++++ 14 files changed, 54 insertions(+), 41 deletions(-)

2 1

[PATCH v2 00/48] ARM: PXA multiplatform support
by Arnd Bergmann 07 May '22

07 May '22

From: Arnd Bergmann <arnd(a)arndb.de> This revisits a series I sent a few years ago: https://lore.kernel.org/lkml/20191018154052.1276506-1-arnd@arndb.de/ All the other ARMv5 conversions are under way now, with OMAP1 being the only one still not in linux-next yet, and PXA completing the set. Most of the patches are unchanged from before, furtunately the PXA code is fairly stable. I addressed Robert's comments, pulled in two patches from Dmitry, and added the last a the final four patches to finish off the multiplatform conversion. I hope someone is left to test these on PXA: if this works, I'd like to merge it for 5.19. A git tree with these is avaialable for testing at https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git/log/?h=pxa-mult… Arnd Arnd Bergmann (46): ARM: pxa: split mach/generic.h ARM: pxa: make mainstone.h private ARM: pxa: make mach/regs-uart.h private ARM: pxa: remove mach/dma.h ARM: pxa: split up mach/hardware.h ARM: pxa: stop using mach/bitfield.h ARM: pxa: move mach/sound.h to linux/platform_data/ ARM: pxa: move regs-lcd.h into driver watchdog: sa1100: use platform device registration ARM: pxa: pxa2xx-ac97-lib: use IRQ resource ARM: pxa: move pcmcia board data into mach-pxa ARM: pxa: make addr-map.h header local ARM: pxa: use pdev resource for palmld mmio ARM: pxa: maybe fix gpio lookup tables ARM: pxa: tosa: use gpio descriptor for audio ARM: pxa: poodle: use platform data for poodle asoc driver ARM: pxa: corgi: use gpio descriptors for audio ARM: pxa: hx4700: use gpio descriptors for audio ARM: pxa: lubbock: pass udc irqs as resource ARM: pxa: spitz: use gpio descriptors for audio ARM: pxa: eseries: use gpio lookup for audio ARM: pxa: z2: use gpio lookup for audio device ARM: pxa: magician: use platform driver for audio ARM: pxa: mainstone-wm97xx: use gpio lookup table ARM: pxa: zylonite: use gpio lookup instead mfp header input: touchscreen: mainstone: fix pxa2xx+pxa3xx configuration input: touchscreen: mainstone: sync with zylonite driver Input: touchscreen: use wrapper for pxa2xx ac97 registers ASoC: pxa: use pdev resource for FIFO regs ASoC: pxa: ac97: use normal MMIO accessors ASoC: pxa: i2s: use normal MMIO accessors ARM: pxa: pcmcia: move smemc configuration back to arch ARM: pxa: remove get_clk_frequency_khz() cpufreq: pxa3: move clk register access to clk driver ARM: pxa: move smemc register access from clk to platform ARM: pxa: move clk register definitions to driver power: tosa: simplify probe function ARM: pxa: tosa: use gpio lookup for battery ARM: pxa: remove unused mach/bitfield.h ARM: mmp: remove tavorevb board support ARM: mmp: rename pxa_register_device ARM: pxa: move plat-pxa to drivers/soc/ ARM: PXA: fix multi-cpu build of xsc3 ARM: pxa: move mach/*.h to mach-pxa/ ARM: pxa: remove support for MTD_XIP ARM: pxa: convert to multiplatform Dmitry Torokhov (2): Input: wm97xx - switch to using threaded IRQ Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops arch/arm/Kconfig | 22 -- arch/arm/Makefile | 1 - arch/arm/common/locomo.c | 1 - arch/arm/common/sa1111.c | 5 +- arch/arm/include/asm/hardware/sa1111.h | 2 - arch/arm/mach-mmp/Kconfig | 10 +- arch/arm/mach-mmp/Makefile | 1 - arch/arm/mach-mmp/devices.c | 2 +- arch/arm/mach-mmp/devices.h | 10 +- arch/arm/mach-mmp/mfp.h | 2 +- arch/arm/mach-mmp/mmp2.h | 48 ++--- arch/arm/mach-mmp/pxa168.h | 60 +++--- arch/arm/mach-mmp/pxa910.h | 38 ++-- arch/arm/mach-mmp/tavorevb.c | 113 ----------- arch/arm/mach-mmp/ttc_dkb.c | 6 +- arch/arm/mach-pxa/Kconfig | 14 ++ arch/arm/mach-pxa/Makefile | 18 +- arch/arm/mach-pxa/Makefile.boot | 3 - .../mach-pxa/{include/mach => }/addr-map.h | 0 arch/arm/mach-pxa/am300epd.c | 2 +- .../arm/mach-pxa/balloon3-pcmcia.c | 4 +- arch/arm/mach-pxa/balloon3.c | 4 +- .../mach-pxa/{include/mach => }/balloon3.h | 0 arch/arm/mach-pxa/cm-x300.c | 12 +- arch/arm/mach-pxa/colibri-evalboard.c | 1 - .../arm/mach-pxa/colibri-pcmcia.c | 2 +- arch/arm/mach-pxa/colibri-pxa270-income.c | 1 - arch/arm/mach-pxa/colibri-pxa270.c | 2 +- arch/arm/mach-pxa/colibri-pxa300.c | 3 +- arch/arm/mach-pxa/colibri-pxa320.c | 2 +- arch/arm/mach-pxa/colibri-pxa3xx.c | 3 +- arch/arm/mach-pxa/colibri.h | 2 +- arch/arm/mach-pxa/corgi.c | 23 ++- arch/arm/mach-pxa/{include/mach => }/corgi.h | 0 arch/arm/mach-pxa/corgi_pm.c | 5 +- arch/arm/mach-pxa/csb726.c | 5 +- arch/arm/mach-pxa/csb726.h | 2 +- arch/arm/mach-pxa/devices.c | 17 +- .../arm/mach-pxa/e740-pcmcia.c | 4 +- .../{include/mach => }/eseries-gpio.h | 0 arch/arm/mach-pxa/eseries.c | 36 +++- arch/arm/mach-pxa/ezx.c | 1 - arch/arm/mach-pxa/generic.c | 62 ++++-- arch/arm/mach-pxa/generic.h | 9 - arch/arm/mach-pxa/gumstix.c | 1 - arch/arm/mach-pxa/gumstix.h | 2 +- arch/arm/mach-pxa/h5000.c | 2 +- .../arm/mach-pxa/hx4700-pcmcia.c | 4 +- arch/arm/mach-pxa/hx4700.c | 18 +- arch/arm/mach-pxa/{include/mach => }/hx4700.h | 0 arch/arm/mach-pxa/idp.c | 2 - arch/arm/mach-pxa/idp.h | 2 +- arch/arm/mach-pxa/include/mach/bitfield.h | 114 ----------- arch/arm/mach-pxa/include/mach/dma.h | 17 -- arch/arm/mach-pxa/include/mach/generic.h | 1 - arch/arm/mach-pxa/include/mach/mtd-xip.h | 36 ---- arch/arm/mach-pxa/include/mach/uncompress.h | 70 ------- arch/arm/mach-pxa/irq.c | 5 +- arch/arm/mach-pxa/{include/mach => }/irqs.h | 0 arch/arm/mach-pxa/littleton.c | 1 - arch/arm/mach-pxa/lpd270.c | 6 +- arch/arm/mach-pxa/lubbock.c | 17 +- .../arm/mach-pxa/{include/mach => }/lubbock.h | 4 +- arch/arm/mach-pxa/magician.c | 56 +++++- .../mach-pxa/{include/mach => }/magician.h | 2 +- arch/arm/mach-pxa/mainstone.c | 17 +- .../mach-pxa/{include/mach => }/mainstone.h | 4 +- arch/arm/mach-pxa/mfp-pxa2xx.c | 3 +- arch/arm/mach-pxa/mfp-pxa2xx.h | 2 +- arch/arm/mach-pxa/mfp-pxa3xx.c | 3 +- arch/arm/mach-pxa/mfp-pxa3xx.h | 2 +- arch/arm/mach-pxa/{include/mach => }/mfp.h | 2 +- arch/arm/mach-pxa/mioa701.c | 4 +- arch/arm/mach-pxa/mxm8x10.c | 8 +- arch/arm/mach-pxa/palm27x.c | 2 +- .../arm/mach-pxa/palmld-pcmcia.c | 5 +- arch/arm/mach-pxa/palmld.c | 23 ++- arch/arm/mach-pxa/{include/mach => }/palmld.h | 0 arch/arm/mach-pxa/palmt5.c | 11 +- arch/arm/mach-pxa/palmt5.h | 2 +- .../arm/mach-pxa/palmtc-pcmcia.c | 4 +- arch/arm/mach-pxa/palmtc.c | 4 +- arch/arm/mach-pxa/{include/mach => }/palmtc.h | 0 arch/arm/mach-pxa/palmte2.c | 2 +- arch/arm/mach-pxa/palmtreo.c | 4 +- .../arm/mach-pxa/palmtx-pcmcia.c | 4 +- arch/arm/mach-pxa/palmtx.c | 13 +- arch/arm/mach-pxa/{include/mach => }/palmtx.h | 0 arch/arm/mach-pxa/palmz72.c | 2 +- arch/arm/mach-pxa/pcm027.h | 2 +- arch/arm/mach-pxa/pcm990-baseboard.c | 2 +- arch/arm/mach-pxa/pcm990_baseboard.h | 2 +- arch/arm/mach-pxa/poodle.c | 31 ++- arch/arm/mach-pxa/{include/mach => }/poodle.h | 2 - arch/arm/mach-pxa/pxa-dt.c | 2 +- arch/arm/mach-pxa/pxa-regs.h | 52 +++++ arch/arm/mach-pxa/pxa25x.c | 12 +- arch/arm/mach-pxa/pxa25x.h | 6 +- arch/arm/mach-pxa/pxa27x-udc.h | 2 + arch/arm/mach-pxa/pxa27x.c | 12 +- arch/arm/mach-pxa/pxa27x.h | 6 +- .../mach-pxa/{include/mach => }/pxa2xx-regs.h | 47 +---- arch/arm/mach-pxa/pxa2xx.c | 30 ++- arch/arm/mach-pxa/pxa300.c | 1 + arch/arm/mach-pxa/pxa320.c | 1 + .../mach-pxa/{include/mach => }/pxa3xx-regs.h | 71 +------ arch/arm/mach-pxa/pxa3xx-ulpi.c | 2 +- arch/arm/mach-pxa/pxa3xx.c | 19 +- arch/arm/mach-pxa/pxa3xx.h | 6 +- arch/arm/mach-pxa/pxa930.c | 1 + .../mach-pxa/{include/mach => }/regs-ost.h | 4 +- arch/arm/mach-pxa/regs-rtc.h | 2 +- arch/arm/mach-pxa/regs-u2d.h | 2 - .../mach-pxa/{include/mach => }/regs-uart.h | 2 + arch/arm/mach-pxa/reset.c | 9 +- arch/arm/mach-pxa/{include/mach => }/reset.h | 2 +- arch/arm/mach-pxa/sharpsl_pm.c | 2 +- arch/arm/mach-pxa/sleep.S | 9 +- arch/arm/mach-pxa/smemc.c | 13 +- arch/arm/mach-pxa/{include/mach => }/smemc.h | 0 arch/arm/mach-pxa/spitz.c | 37 +++- arch/arm/mach-pxa/{include/mach => }/spitz.h | 0 arch/arm/mach-pxa/spitz_pm.c | 3 +- arch/arm/mach-pxa/standby.S | 3 +- arch/arm/mach-pxa/tosa.c | 47 ++++- arch/arm/mach-pxa/{include/mach => }/tosa.h | 0 .../arm/mach-pxa/trizeps4-pcmcia.c | 6 +- arch/arm/mach-pxa/trizeps4.c | 6 +- .../mach-pxa/{include/mach => }/trizeps4.h | 1 + .../arm/mach-pxa/viper-pcmcia.c | 6 +- .../arm/mach-pxa/viper-pcmcia.h | 0 arch/arm/mach-pxa/viper.c | 8 +- .../arm/mach-pxa/vpac270-pcmcia.c | 4 +- arch/arm/mach-pxa/vpac270.c | 4 +- .../arm/mach-pxa/{include/mach => }/vpac270.h | 0 arch/arm/mach-pxa/xcep.c | 4 +- arch/arm/mach-pxa/z2.c | 13 +- arch/arm/mach-pxa/{include/mach => }/z2.h | 0 arch/arm/mach-pxa/zeus.c | 8 +- arch/arm/mach-pxa/zylonite.c | 34 +++- arch/arm/mach-pxa/zylonite.h | 2 + arch/arm/mach-pxa/zylonite_pxa300.c | 1 + arch/arm/mach-pxa/zylonite_pxa320.c | 1 + arch/arm/mach-sa1100/generic.c | 6 +- arch/arm/mach-sa1100/include/mach/reset.h | 1 - arch/arm/mm/copypage-xsc3.c | 2 + arch/mips/alchemy/devboards/db1300.c | 9 - drivers/ata/pata_palmld.c | 3 +- drivers/clk/pxa/clk-pxa.c | 8 +- drivers/clk/pxa/clk-pxa.h | 9 +- drivers/clk/pxa/clk-pxa25x.c | 46 ++--- drivers/clk/pxa/clk-pxa27x.c | 68 +++---- drivers/clk/pxa/clk-pxa2xx.h | 58 ++++++ drivers/clk/pxa/clk-pxa3xx.c | 139 +++++++++++-- drivers/cpufreq/pxa2xx-cpufreq.c | 6 +- drivers/cpufreq/pxa3xx-cpufreq.c | 65 +++--- drivers/input/mouse/pxa930_trkball.c | 1 - drivers/input/touchscreen/Kconfig | 2 + drivers/input/touchscreen/mainstone-wm97xx.c | 130 ++++++------ drivers/input/touchscreen/wm97xx-core.c | 42 +--- drivers/input/touchscreen/zylonite-wm97xx.c | 43 ++-- drivers/leds/leds-locomo.c | 1 - drivers/mmc/host/pxamci.c | 2 +- drivers/mtd/maps/pxa2xx-flash.c | 2 - drivers/pcmcia/Makefile | 13 -- drivers/pcmcia/pxa2xx_base.c | 48 ++--- drivers/pcmcia/pxa2xx_sharpsl.c | 3 +- drivers/pcmcia/sa1111_generic.c | 1 - drivers/pcmcia/sa1111_lubbock.c | 1 - drivers/pcmcia/soc_common.c | 2 - drivers/pcmcia/soc_common.h | 120 +---------- drivers/power/supply/tosa_battery.c | 189 ++++++++++-------- drivers/rtc/rtc-pxa.c | 2 - drivers/soc/Kconfig | 1 + drivers/soc/Makefile | 1 + .../arm/plat-pxa => drivers/soc/pxa}/Kconfig | 5 +- .../arm/plat-pxa => drivers/soc/pxa}/Makefile | 4 - {arch/arm/plat-pxa => drivers/soc/pxa}/mfp.c | 2 +- {arch/arm/plat-pxa => drivers/soc/pxa}/ssp.c | 0 drivers/usb/gadget/udc/pxa25x_udc.c | 37 ++-- drivers/usb/gadget/udc/pxa25x_udc.h | 7 +- drivers/usb/host/ohci-pxa27x.c | 3 +- .../video/fbdev/pxa3xx-regs.h | 24 +-- drivers/video/fbdev/pxafb.c | 4 +- drivers/watchdog/sa1100_wdt.c | 88 +++++--- include/linux/clk/pxa.h | 16 ++ include/linux/platform_data/asoc-poodle.h | 16 ++ .../linux/platform_data/asoc-pxa.h | 4 +- include/linux/platform_data/video-pxafb.h | 22 +- .../hardware.h => include/linux/soc/pxa/cpu.h | 61 +----- .../plat => include/linux/soc/pxa}/mfp.h | 6 +- include/linux/soc/pxa/smemc.h | 13 ++ include/linux/wm97xx.h | 4 - include/pcmcia/soc_common.h | 125 ++++++++++++ include/sound/pxa2xx-lib.h | 4 + sound/arm/pxa2xx-ac97-lib.c | 145 +++++++++----- .../arm/pxa2xx-ac97-regs.h | 42 ++-- sound/arm/pxa2xx-ac97.c | 3 +- sound/soc/pxa/corgi.c | 43 ++-- sound/soc/pxa/e740_wm9705.c | 37 ++-- sound/soc/pxa/e750_wm9705.c | 33 ++- sound/soc/pxa/e800_wm9712.c | 33 ++- sound/soc/pxa/em-x270.c | 2 +- sound/soc/pxa/hx4700.c | 34 ++-- sound/soc/pxa/magician.c | 141 ++++--------- sound/soc/pxa/mioa701_wm9713.c | 2 +- sound/soc/pxa/palm27x.c | 2 +- sound/soc/pxa/poodle.c | 51 ++--- sound/soc/pxa/pxa2xx-ac97.c | 24 ++- sound/soc/pxa/pxa2xx-i2s.c | 112 ++++++----- sound/soc/pxa/spitz.c | 58 +++--- sound/soc/pxa/tosa.c | 18 +- sound/soc/pxa/z2.c | 8 +- 213 files changed, 1902 insertions(+), 1936 deletions(-) delete mode 100644 arch/arm/mach-mmp/tavorevb.c delete mode 100644 arch/arm/mach-pxa/Makefile.boot rename arch/arm/mach-pxa/{include/mach => }/addr-map.h (100%) rename drivers/pcmcia/pxa2xx_balloon3.c => arch/arm/mach-pxa/balloon3-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/balloon3.h (100%) rename drivers/pcmcia/pxa2xx_colibri.c => arch/arm/mach-pxa/colibri-pcmcia.c (99%) rename arch/arm/mach-pxa/{include/mach => }/corgi.h (100%) rename drivers/pcmcia/pxa2xx_e740.c => arch/arm/mach-pxa/e740-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/eseries-gpio.h (100%) rename drivers/pcmcia/pxa2xx_hx4700.c => arch/arm/mach-pxa/hx4700-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/hx4700.h (100%) delete mode 100644 arch/arm/mach-pxa/include/mach/bitfield.h delete mode 100644 arch/arm/mach-pxa/include/mach/dma.h delete mode 100644 arch/arm/mach-pxa/include/mach/generic.h delete mode 100644 arch/arm/mach-pxa/include/mach/mtd-xip.h delete mode 100644 arch/arm/mach-pxa/include/mach/uncompress.h rename arch/arm/mach-pxa/{include/mach => }/irqs.h (100%) rename arch/arm/mach-pxa/{include/mach => }/lubbock.h (95%) rename arch/arm/mach-pxa/{include/mach => }/magician.h (99%) rename arch/arm/mach-pxa/{include/mach => }/mainstone.h (98%) rename arch/arm/mach-pxa/{include/mach => }/mfp.h (91%) rename drivers/pcmcia/pxa2xx_palmld.c => arch/arm/mach-pxa/palmld-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/palmld.h (100%) rename drivers/pcmcia/pxa2xx_palmtc.c => arch/arm/mach-pxa/palmtc-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/palmtc.h (100%) rename drivers/pcmcia/pxa2xx_palmtx.c => arch/arm/mach-pxa/palmtx-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/palmtx.h (100%) rename arch/arm/mach-pxa/{include/mach => }/poodle.h (98%) create mode 100644 arch/arm/mach-pxa/pxa-regs.h rename arch/arm/mach-pxa/{include/mach => }/pxa2xx-regs.h (76%) rename arch/arm/mach-pxa/{include/mach => }/pxa3xx-regs.h (61%) rename arch/arm/mach-pxa/{include/mach => }/regs-ost.h (94%) rename arch/arm/mach-pxa/{include/mach => }/regs-uart.h (99%) rename arch/arm/mach-pxa/{include/mach => }/reset.h (92%) rename arch/arm/mach-pxa/{include/mach => }/smemc.h (100%) rename arch/arm/mach-pxa/{include/mach => }/spitz.h (100%) rename arch/arm/mach-pxa/{include/mach => }/tosa.h (100%) rename drivers/pcmcia/pxa2xx_trizeps4.c => arch/arm/mach-pxa/trizeps4-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/trizeps4.h (99%) rename drivers/pcmcia/pxa2xx_viper.c => arch/arm/mach-pxa/viper-pcmcia.c (97%) rename include/linux/platform_data/pcmcia-pxa2xx_viper.h => arch/arm/mach-pxa/viper-pcmcia.h (100%) rename drivers/pcmcia/pxa2xx_vpac270.c => arch/arm/mach-pxa/vpac270-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/vpac270.h (100%) rename arch/arm/mach-pxa/{include/mach => }/z2.h (100%) create mode 100644 drivers/clk/pxa/clk-pxa2xx.h rename {arch/arm/plat-pxa => drivers/soc/pxa}/Kconfig (83%) rename {arch/arm/plat-pxa => drivers/soc/pxa}/Makefile (51%) rename {arch/arm/plat-pxa => drivers/soc/pxa}/mfp.c (99%) rename {arch/arm/plat-pxa => drivers/soc/pxa}/ssp.c (100%) rename arch/arm/mach-pxa/include/mach/regs-lcd.h => drivers/video/fbdev/pxa3xx-regs.h (90%) create mode 100644 include/linux/clk/pxa.h create mode 100644 include/linux/platform_data/asoc-poodle.h rename arch/arm/mach-pxa/include/mach/audio.h => include/linux/platform_data/asoc-pxa.h (93%) rename arch/arm/mach-pxa/include/mach/hardware.h => include/linux/soc/pxa/cpu.h (75%) rename {arch/arm/plat-pxa/include/plat => include/linux/soc/pxa}/mfp.h (98%) create mode 100644 include/linux/soc/pxa/smemc.h create mode 100644 include/pcmcia/soc_common.h rename arch/arm/mach-pxa/include/mach/regs-ac97.h => sound/arm/pxa2xx-ac97-regs.h (71%) -- 2.29.2 Cc: Daniel Mack <daniel(a)zonque.org> Cc: Haojian Zhuang <haojian.zhuang(a)gmail.com> Cc: Robert Jarzmik <robert.jarzmik(a)free.fr> Cc: Marek Vasut <marek.vasut(a)gmail.com> Cc: Philipp Zabel <philipp.zabel(a)gmail.com> Cc: Lubomir Rintel <lkundrak(a)v3.sk> Cc: Paul Parsons <lost.distance(a)yahoo.com> Cc: Tomas Cech <sleep_walker(a)suse.com> Cc: Sergey Lapin <slapin(a)ossfans.org> Cc: Thomas Bogendoerfer <tsbogend(a)alpha.franken.de> Cc: Michael Turquette <mturquette(a)baylibre.com> Cc: Stephen Boyd <sboyd(a)kernel.org> Cc: "Rafael J. Wysocki" <rafael(a)kernel.org> Cc: Viresh Kumar <viresh.kumar(a)linaro.org> Cc: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Cc: Ulf Hansson <ulf.hansson(a)linaro.org> Cc: Dominik Brodowski <linux(a)dominikbrodowski.net> Cc: Helge Deller <deller(a)gmx.de> Cc: Mark Brown <broonie(a)kernel.org> Cc: Arnd Bergmann <arnd(a)arndb.de> Cc: Linus Walleij <linus.walleij(a)linaro.org> Cc: linux-arm-kernel(a)lists.infradead.org Cc: linux-kernel(a)vger.kernel.org Cc: linux-mips(a)vger.kernel.org Cc: linux-ide(a)vger.kernel.org Cc: linux-clk(a)vger.kernel.org Cc: linux-pm(a)vger.kernel.org Cc: linux-input(a)vger.kernel.org Cc: patches(a)opensource.cirrus.com Cc: linux-leds(a)vger.kernel.org Cc: linux-mmc(a)vger.kernel.org Cc: linux-mtd(a)lists.infradead.org Cc: linux-rtc(a)vger.kernel.org Cc: linux-usb(a)vger.kernel.org Cc: linux-fbdev(a)vger.kernel.org Cc: dri-devel(a)lists.freedesktop.org Cc: alsa-devel(a)alsa-project.org

7 67

[PATCH 00/14] ASoC: Intel: avs: Driver core and PCM operations
by Cezary Rojewski 06 May '22

06 May '22

Part three of main AVS driver series. This series was originally part of the initial series which was later divided [1] into smaller, easier-to-review chunks. Thus, many patches found here were already present on the list. This series consists of code typical to many drivers - PCI driver operations, trace ability, PM operations - as well as PCM handlers for all standard audio interfaces, that is, HDA, I2S and DMIC are found here. Series starts with updating firmware boot flow - libraries are no longer ignored. This change is dependent on already merged topology code [2] and because of that could not be part of the initial series [1]. PCM operations are split into four changes. First component operations alone i.e. operations which are usually agnostic towards path position (FE/BE). Then it continues with "generic" FE operations - there is no interface split here as from Intel ADSP point of view, FE, or HOST side as it's called in the specs, involves HD-Audio operations only. BE (also known as LINK) side on the other hand is divided into "non-HD-Audio" and HD-Audio part. The former represents transfer over DMIC and I2S interfaces both. While patches implementing standard PCI driver operations along (again standard) HD-Audio initialization routines followed up by power management handlers are two major ones, series covers also other important subjects such as: While patches implementing standard PCI driver operations along (again standard) HD-Audio initialization routines followed up by power management handlers are two major ones, series covers also other important subjects such as: - event tracing - preparation for firmware tracing (debugability) - coredump (debugability) - recovery flow (attempt recovery after IPC timeout or exception) - D0ix (D0 device substate, complements standard power management) Series is finalized by actual addition of supported platforms: SKL and APL-based. Platform-specific files are limited to firmware-specific bits, that is, bits that are specific to given firmware generation. Everything else is shared and is part of already upstream messaging code found in ipc.c, messages.c and messages.h files. [1]: https://lore.kernel.org/all/20220311153544.136854-1-cezary.rojewski@intel.c… [2]: https://lore.kernel.org/all/20220331135246.993089-1-cezary.rojewski@intel.c… Cezary Rojewski (14): ASoC: Intel: avs: Account for libraries when booting basefw ASoC: Intel: avs: Generic soc component driver ASoC: Intel: avs: Generic PCM FE operations ASoC: Intel: avs: non-HDA PCM BE operations ASoC: Intel: avs: HDA PCM BE operations ASoC: Intel: avs: Coredump and recovery flow ASoC: Intel: avs: Prepare for firmware tracing ASoC: Intel: avs: D0ix power state support ASoC: Intel: avs: Event tracing ASoC: Intel: avs: Machine board registration ASoC: Intel: avs: PCI driver implementation ASoC: Intel: avs: Power management ASoC: Intel: avs: SKL-based platforms support ASoC: Intel: avs: APL-based platforms support include/sound/soc-acpi.h | 2 + sound/soc/intel/Kconfig | 4 +- sound/soc/intel/avs/Makefile | 7 +- sound/soc/intel/avs/apl.c | 250 ++++++ sound/soc/intel/avs/avs.h | 79 ++ sound/soc/intel/avs/board_selection.c | 463 ++++++++++ sound/soc/intel/avs/core.c | 655 ++++++++++++++ sound/soc/intel/avs/dsp.c | 27 +- sound/soc/intel/avs/ipc.c | 249 +++++- sound/soc/intel/avs/loader.c | 83 ++ sound/soc/intel/avs/messages.c | 35 +- sound/soc/intel/avs/messages.h | 51 ++ sound/soc/intel/avs/pcm.c | 1182 +++++++++++++++++++++++++ sound/soc/intel/avs/registers.h | 8 + sound/soc/intel/avs/skl.c | 125 +++ sound/soc/intel/avs/topology.c | 2 - sound/soc/intel/avs/trace.c | 33 + sound/soc/intel/avs/trace.h | 158 ++++ sound/soc/intel/avs/utils.c | 23 + 19 files changed, 3421 insertions(+), 15 deletions(-) create mode 100644 sound/soc/intel/avs/apl.c create mode 100644 sound/soc/intel/avs/board_selection.c create mode 100644 sound/soc/intel/avs/pcm.c create mode 100644 sound/soc/intel/avs/skl.c create mode 100644 sound/soc/intel/avs/trace.c create mode 100644 sound/soc/intel/avs/trace.h -- 2.25.1

5 39

[PATCH v3 0/6] Add driver for SAMA7G5's PDMC
by Codrin Ciubotariu 05 May '22

05 May '22

This patch series adds support for Pulse Density Microphone Controller (PDMC), present on Microchip's SAMA7G5. The PDMC interfaces up to 4 digital microphones having Pulse Density Modulated (PDM) outputs. It generates a single clock line and samples 1 or 2 data lines. The signal path includes an audio grade programmable decimation filter and outputs 24-bit audio words. The source of each channel can be independently defined as PDMC_DS0 or PDMC_DS1, sampled at the rising or falling edge of PDMC_CLK. The patch series starts with a fix on the ASoC DMA engine support. Then continues with the bindings and the driver of PDMC. It is followed by the DT nodes for SAMA7G5 and SAMA7G5-EK. In the end, the drivers for PDMC and PDM microphones are enabled in sama7_defconfig. Changes in v3: - addressed new DT bindings comments from Krzysztof Kozlowski Changes in v2: - addressed DT bindings comments from Krzysztof Kozlowski Codrin Ciubotariu (6): ASoC: dmaengine: do not use a NULL prepare_slave_config() callback ASoC: dt-bindings: Document Microchip's PDMC ASoC: atmel: mchp-pdmc: add PDMC driver ARM: dts: at91: sama7g5: add nodes for PDMC ARM: dts: at91: sama7g5ek: add node for PDMC0 ARM: configs: at91: sama7_defconfig: add MCHP PDMC and DMIC drivers .../bindings/sound/microchip,pdmc.yaml | 100 ++ arch/arm/boot/dts/at91-sama7g5ek.dts | 21 +- arch/arm/boot/dts/sama7g5.dtsi | 24 + arch/arm/configs/sama7_defconfig | 2 + include/dt-bindings/sound/microchip,pdmc.h | 13 + sound/soc/atmel/Kconfig | 16 + sound/soc/atmel/Makefile | 2 + sound/soc/atmel/mchp-pdmc.c | 1084 +++++++++++++++++ sound/soc/soc-generic-dmaengine-pcm.c | 6 +- 9 files changed, 1264 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/microchip,pdmc.yaml create mode 100644 include/dt-bindings/sound/microchip,pdmc.h create mode 100644 sound/soc/atmel/mchp-pdmc.c -- 2.32.0

6 16