April 2022 - Alsa-devel - mailman.alsa-project.org

[PATCH v6 00/10] Add support for CS35L41 in HDA systems
by Lucas Tanure 31 Oct '22

31 Oct '22

Add support for laptops that have CS35L41 connected to an HDA codec by I2S and direct I2C connection to the CPU. Laptops that use CS35L41 and are SPI will be added in the future, after the support for it is resolved at i2c-multi-instantiate driver. i2c-multi-instantiate thread: https://lkml.org/lkml/2021/12/10/557 Hardware: - Some laptops have two CS35L41 amplifiers, connected to Realtek ALC287 by an I2S bus and by and direct I2C to the CPU. - The ALC287 codec is connected to the CPU by an HDA bus. - The CS35L41 has a DSP which will require firmware to be loaded. Architecture: - Creation of a library of shared functions for CS35L41 ASoC and HDA - HDA codec driver (RealTek) and CS35L41 HDA driver are combined by using component binding, where it uses device names to find the components and bind to the master - The HDA CS35L41 driver applies pre-defined registers sequences for each action in playback for HDA Sound card Changes from V5: - Fix build issues reported by Intel Test Bot - Check devm_kasprintf return - Add ACPI dependency to HDA drivers V5: https://lkml.org/lkml/2021/12/16/430 Changes from V4: - Save index received from ACPI for latter use in DSP Support - Move CS35L41_DSP1_CCM_CORE_CTRL to regmap_write so doesn't affect DSP hibernation feature V4: https://lkml.org/lkml/2021/12/14/487 Changes from V3: - SPI bus driver starter added - Use separate modules approach instead of liking library - Add CSC3551 ACPI _HID for more I2C laptops - Removed regulators from HDA driver - Add note about Non-conforming _HID V3: https://lkml.org/lkml/2021/11/23/723 Changes from V2: - Not an RFC - Create a new HDA driver for CS35L41 instead of using the ASoC one - Use component binding and device names to find the CS35L41 driver - Create a shared library for ASoC and HDA CS35L41 drivers v2: https://lkml.org/lkml/2021/10/8/344 Lucas Tanure (9): ASoC: cs35l41: Convert tables to shared source code ASoC: cs35l41: Move cs35l41_otp_unpack to shared code ASoC: cs35l41: Move power initializations to reg_sequence ASoC: cs35l41: Create shared function for errata patches ASoC: cs35l41: Create shared function for setting channels ASoC: cs35l41: Create shared function for boost configuration hda: cs35l41: Add support for CS35L41 in HDA systems ACPI / scan: Create platform device for CLSA0100 and CSC3551 ACPI nodes ALSA: hda/realtek: Add support for Legion 7 16ACHg6 laptop Stefan Binding (1): ALSA: hda/realtek: Add CS35L41 support for Thinkpad laptops MAINTAINERS | 2 + drivers/acpi/scan.c | 3 + drivers/platform/x86/i2c-multi-instantiate.c | 11 + include/sound/cs35l41.h | 739 ++++++++++++++++++ sound/pci/hda/Kconfig | 29 + sound/pci/hda/Makefile | 10 + sound/pci/hda/cs35l41_hda.c | 527 +++++++++++++ sound/pci/hda/cs35l41_hda.h | 69 ++ sound/pci/hda/cs35l41_hda_i2c.c | 66 ++ sound/pci/hda/cs35l41_hda_spi.c | 63 ++ sound/pci/hda/hda_component.h | 20 + sound/pci/hda/patch_realtek.c | 146 ++++ sound/soc/codecs/Kconfig | 11 +- sound/soc/codecs/Makefile | 4 +- sound/soc/codecs/cs35l41-i2c.c | 1 - .../{cs35l41-tables.c => cs35l41-lib.c} | 355 ++++++++- sound/soc/codecs/cs35l41-spi.c | 1 - sound/soc/codecs/cs35l41.c | 360 +-------- sound/soc/codecs/cs35l41.h | 734 ----------------- 19 files changed, 2055 insertions(+), 1096 deletions(-) create mode 100644 sound/pci/hda/cs35l41_hda.c create mode 100644 sound/pci/hda/cs35l41_hda.h create mode 100644 sound/pci/hda/cs35l41_hda_i2c.c create mode 100644 sound/pci/hda/cs35l41_hda_spi.c create mode 100644 sound/pci/hda/hda_component.h rename sound/soc/codecs/{cs35l41-tables.c => cs35l41-lib.c} (71%) -- 2.34.1

11 28

[PATCH 1/2] ALSA: hda: Add Intel DG2 PCI ID and HDMI codec vid
by Kai Vehmanen 14 Oct '22

14 Oct '22

Add HD Audio PCI ID and HDMI codec vendor ID for Intel DG2. Reviewed-by: Uma Shankar <uma.shankar(a)intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> --- sound/pci/hda/hda_intel.c | 12 +++++++++++- sound/pci/hda/patch_hdmi.c | 1 + 2 files changed, 12 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 221afacbc7fd..b98d7975adea 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -335,7 +335,10 @@ enum { ((pci)->device == 0x0c0c) || \ ((pci)->device == 0x0d0c) || \ ((pci)->device == 0x160c) || \ - ((pci)->device == 0x490d)) + ((pci)->device == 0x490d) || \ + ((pci)->device == 0x4f90) || \ + ((pci)->device == 0x4f91) || \ + ((pci)->device == 0x4f92)) #define IS_BXT(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x5a98) @@ -2477,6 +2480,13 @@ static const struct pci_device_id azx_ids[] = { /* DG1 */ { PCI_DEVICE(0x8086, 0x490d), .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE}, + /* DG2 */ + { PCI_DEVICE(0x8086, 0x4f90), + .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE}, + { PCI_DEVICE(0x8086, 0x4f91), + .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE}, + { PCI_DEVICE(0x8086, 0x4f92), + .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE}, /* Alderlake-S */ { PCI_DEVICE(0x8086, 0x7ad0), .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE}, diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 65d2c5539919..98633d2684de 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -4382,6 +4382,7 @@ HDA_CODEC_ENTRY(0x80862814, "DG1 HDMI", patch_i915_tgl_hdmi), HDA_CODEC_ENTRY(0x80862815, "Alderlake HDMI", patch_i915_tgl_hdmi), HDA_CODEC_ENTRY(0x8086281c, "Alderlake-P HDMI", patch_i915_tgl_hdmi), HDA_CODEC_ENTRY(0x80862816, "Rocketlake HDMI", patch_i915_tgl_hdmi), +HDA_CODEC_ENTRY(0x80862819, "DG2 HDMI", patch_i915_tgl_hdmi), HDA_CODEC_ENTRY(0x8086281a, "Jasperlake HDMI", patch_i915_icl_hdmi), HDA_CODEC_ENTRY(0x8086281b, "Elkhartlake HDMI", patch_i915_icl_hdmi), HDA_CODEC_ENTRY(0x80862880, "CedarTrail HDMI", patch_generic_hdmi), base-commit: d7aca8d8f548570f650d9b1dfedf6902f56f2bce -- 2.34.1

3 3

[PATCH] sound: soc/codecs: tlv320adc3xxx: needs GPIOLIB
by Randy Dunlap 31 Aug '22

31 Aug '22

Fix build errors when CONFIG_GPIOLIB is not enabled: ../sound/soc/codecs/tlv320adc3xxx.c: In function 'adc3xxx_i2c_probe': ../sound/soc/codecs/tlv320adc3xxx.c:1352:28: error: implicit declaration of function 'devm_gpiod_get'; did you mean 'devm_gpio_free'? [-Werror=implicit-function-declaration] 1352 | adc3xxx->rst_pin = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); ../sound/soc/codecs/tlv320adc3xxx.c:1352:57: error: 'GPIOD_OUT_LOW' undeclared (first use in this function); did you mean 'GPIOF_INIT_LOW'? 1352 | adc3xxx->rst_pin = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); CC lib/dynamic_debug.o ../sound/soc/codecs/tlv320adc3xxx.c:1400:9: error: implicit declaration of function 'gpiod_set_value_cansleep'; did you mean 'gpio_set_value_cansleep'? [-Werror=implicit-function-declaration] 1400 | gpiod_set_value_cansleep(adc3xxx->rst_pin, 1); Fixes: e9a3b57efd28 ("ASoC: codec: tlv320adc3xxx: New codec driver") Signed-off-by: Randy Dunlap <rdunlap(a)infradead.org> Reported-by: kernel test robot <lkp(a)intel.com> Cc: Mark Brown <broonie(a)kernel.org> Cc: Liam Girdwood <lgirdwood(a)gmail.com> Cc: Ricard Wanderlof <ricardw(a)axis.com> Cc: Jaroslav Kysela <perex(a)perex.cz> Cc: Takashi Iwai <tiwai(a)suse.com> Cc: alsa-devel(a)alsa-project.org --- sound/soc/codecs/Kconfig | 1 + 1 file changed, 1 insertion(+) --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -1567,6 +1567,7 @@ config SND_SOC_TFA989X config SND_SOC_TLV320ADC3XXX tristate "Texas Instruments TLV320ADC3001/3101 audio ADC" depends on I2C + depends on GPIOLIB help Enable support for Texas Instruments TLV320ADC3001 and TLV320ADC3101 ADCs.

1 1

Request for setup of new repositories
by Takashi Sakamoto 27 Aug '22

27 Aug '22

Hi Jaroslav, Iwai-san, Thanks for your maintenance for alsa-project organization in github.com. Currently I'd like to add new three repositories under the organization as a part of my work for ALSA firewire stack. I've been maintaining libhinawa since 2014 and recently realized that current design is not necessarily convenient since it includes two functions; operation to Linux FireWire cdev, and operation of ALSA HwDep cdev. Currently I'm working for new library to split the latter operation. Then I'd like you to setup below repositories: * 'libhitaki' * 'libhitaki-doc' * 'hitaki-rs' The library itself and its Rust binding are utilized by 'snd-firewire-ctl-services'[2], thus it's preferable to register them under 'GObject Introspection' Team. Thanks for your assist for my work. [1] https://github.com/alsa-project/libhinawa [2] https://github.com/alsa-project/snd-firewire-ctl-services Regards Takashi Sakamoto

2 20

[PATCH] Add quirk to enable Avid Mbox 3 support
by connerknoxpublic＠gmail.com 22 Aug '22

22 Aug '22

From: Conner Knox <connerknoxpublic(a)gmail.com> Hi all, I believe these are the right emails to send this patch to, but if I've missed something please let me know. This patch enables the Avid Mbox 3 audio interface to be used through ALSA. It locks the device at a 48khz sample rate. Then it mutes and raises the appropriate channels/inputs to allow for expected functionality. Thanks for your time. --- sound/usb/quirks-table.h | 76 ++++++++++ sound/usb/quirks.c | 311 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 387 insertions(+) diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 0ea39565e623..5f43863e5a5f 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -2978,6 +2978,82 @@ YAMAHA_DEVICE(0x7010, "UB99"), } } }, +/* DIGIDESIGN MBOX 3 */ +{ + USB_DEVICE(0x0dba, 0x5000), + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .vendor_name = "Digidesign", + .product_name = "Mbox 3", + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_COMPOSITE, + .data = (const struct snd_usb_audio_quirk[]) { + { + .ifnum = 0, + .type = QUIRK_IGNORE_INTERFACE + }, + { + .ifnum = 1, + .type = QUIRK_IGNORE_INTERFACE + }, + { + .ifnum = 2, + .type = QUIRK_AUDIO_FIXED_ENDPOINT, + .data = &(const struct audioformat) { + .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .channels = 4, + .iface = 2, + .altsetting = 1, + .altset_idx = 1, + .attributes = 0x00, + .endpoint = 0x01, + .ep_attr = USB_ENDPOINT_XFER_ISOC | + USB_ENDPOINT_SYNC_ASYNC, + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, + .nr_rates = 1, + .rate_table = (unsigned int[]) { + 48000 + } + } + }, + { + .ifnum = 3, + .type = QUIRK_AUDIO_FIXED_ENDPOINT, + .data = &(const struct audioformat) { + .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .channels = 4, + .iface = 3, + .altsetting = 1, + .altset_idx = 1, + .endpoint = 0x81, + .attributes = 0x00, + .ep_attr = USB_ENDPOINT_XFER_ISOC | + USB_ENDPOINT_SYNC_ASYNC, + .maxpacksize = 0x009c, + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, + .nr_rates = 1, + .rate_table = (unsigned int[]) { + 48000 + } + } + }, + { + .ifnum = 4, + .type = QUIRK_MIDI_FIXED_ENDPOINT, + .data = & (const struct snd_usb_midi_endpoint_info) { + .out_cables = 0x0001, + .in_cables = 0x0001 + } + }, + { + .ifnum = -1 + } + } + } +}, { /* Tascam US122 MKII - playback-only support */ USB_DEVICE_VENDOR_SPEC(0x0644, 0x8021), diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index ab9f3da49941..e7caa7eeb955 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1020,6 +1020,313 @@ static int snd_usb_axefx3_boot_quirk(struct usb_device *dev) return 0; } +static void mbox3_setup_48_24_magic(struct usb_device *dev) +{ + u8 com_buff[4]; + + /* Load 48000Hz rate into buffer */ + com_buff[0] = 0x80; + com_buff[1] = 0xbb; + com_buff[2] = 0x00; + com_buff[3] = 0x00; + + /* Set 48000Hz sample rate */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 0x01, 0x21, 0x0100, 0x0001, &com_buff, 0x0004); + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 0x01, 0x21, 0x0100, 0x8101, &com_buff, 0x0004); + + /* Set clock source to Internal (as opposed to S/PDIF) */ + memset(com_buff, 0x00, 4); + com_buff[0] = 0x01; + com_buff[1] = 0x00; + com_buff[2] = 0x00; + com_buff[3] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0100, 0x8001, &com_buff, 1); + + /* Mute the hardware loopbacks to start the device in a known state. + * The Mbox 3 is little endian and + * the data written here seems a bit odd. + * 0x8000 (shown in big endian form) is muted + * and volume increases to 0xffff it seems. + * I've yet to observe 0xffff being sent. + * Instead, full volume seems to be 0x0000. + * Per my understanding of 16 bit integers, this is seems strange, but maybe I'm missing something + */ + memset(com_buff, 0x00, 4); + com_buff[0] = 0x00; + com_buff[1] = 0x80; + com_buff[2] = 0x00; + com_buff[3] = 0x00; + /* Analogue input 1 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0110, 0x4001, &com_buff, 2); + /* Analogue input 1 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0111, 0x4001, &com_buff, 2); + /* Analogue input 2 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0114, 0x4001, &com_buff, 2); + /* Analogue input 2 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0115, 0x4001, &com_buff, 2); + /* Analogue input 3 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0118, 0x4001, &com_buff, 2); + /* Analogue input 3 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0119, 0x4001, &com_buff, 2); + /* Analogue input 4 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x011c, 0x4001, &com_buff, 2); + /* Analogue input 4 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x011d, 0x4001, &com_buff, 2); + + /* Set software sends to output */ + memset(com_buff, 0x00, 4); + com_buff[0] = 0x00; + com_buff[1] = 0x00; + com_buff[2] = 0x00; + com_buff[3] = 0x00; + /* Analogue software return 1 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0100, 0x4001, &com_buff, 2); + /* Analogue software return 1 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0101, 0x4001, &com_buff, 2); + /* Analogue software return 2 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0104, 0x4001, &com_buff, 2); + /* Analogue software return 2 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0105, 0x4001, &com_buff, 2); + /* Analogue software return 3 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0108, 0x4001, &com_buff, 2); + /* Analogue software return 3 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0109, 0x4001, &com_buff, 2); + /* Analogue software return 4 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x010c, 0x4001, &com_buff, 2); + /* Analogue software return 4 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x010d, 0x4001, &com_buff, 2); + + /* Return to muting sends */ + memset(com_buff, 0x00, 4); + com_buff[0] = 0x00; + com_buff[1] = 0x80; + com_buff[2] = 0x00; + com_buff[3] = 0x00; + /* Analogue fx return left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0120, 0x4001, &com_buff, 2); + /* Analogue fx return right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0121, 0x4001, &com_buff, 2); + + /* Analogue software input 1 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0100, 0x4201, &com_buff, 2); + /* Analogue software input 2 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0101, 0x4201, &com_buff, 2); + /* Analogue software input 3 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0102, 0x4201, &com_buff, 2); + /* Analogue software input 4 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0103, 0x4201, &com_buff, 2); + /* Analogue input 1 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0104, 0x4201, &com_buff, 2); + /* Analogue input 2 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0105, 0x4201, &com_buff, 2); + /* Analogue input 3 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0106, 0x4201, &com_buff, 2); + /* Analogue input 4 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0107, 0x4201, &com_buff, 2); + + /* Toggle allowing host control */ + memset(com_buff, 0x00, 4); + com_buff[0] = 0x02; + com_buff[1] = 0x00; + com_buff[2] = 0x00; + com_buff[3] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 3, 0x21, 0x0000, 0x2001, &com_buff, 1); + + /* Do not dim fx returns */ + memset(com_buff, 0x00, 4); + com_buff[0] = 0x00; + com_buff[1] = 0x00; + com_buff[2] = 0x00; + com_buff[3] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 3, 0x21, 0x0002, 0x2001, &com_buff, 1); + + /* Do not set fx returns to mono */ + memset(com_buff, 0x00, 4); + com_buff[0] = 0x00; + com_buff[1] = 0x00; + com_buff[2] = 0x00; + com_buff[3] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 3, 0x21, 0x0001, 0x2001, &com_buff, 1); + + /* Mute the S/PDIF hardware loopback + * same odd volume logic here as above + */ + memset(com_buff, 0x00, 4); + com_buff[0] = 0x00; + com_buff[1] = 0x80; + com_buff[2] = 0x00; + com_buff[3] = 0x00; + /* S/PDIF hardware input 1 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0112, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 1 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0113, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 2 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0116, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 2 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0117, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 3 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x011a, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 3 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x011b, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 4 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x011e, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 4 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x011f, 0x4001, &com_buff, 2); + /* S/PDIF software return 1 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0102, 0x4001, &com_buff, 2); + /* S/PDIF software return 1 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0103, 0x4001, &com_buff, 2); + /* S/PDIF software return 2 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0106, 0x4001, &com_buff, 2); + /* S/PDIF software return 2 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0107, 0x4001, &com_buff, 2); + /* S/PDIF software return 3 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x010a, 0x4001, &com_buff, 2); + /* S/PDIF software return 3 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x010b, 0x4001, &com_buff, 2); + /* S/PDIF software return 4 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x010e, 0x4001, &com_buff, 2); + /* S/PDIF software return 4 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x010f, 0x4001, &com_buff, 2); + /* S/PDIF fx returns left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0122, 0x4001, &com_buff, 2); + /* S/PDIF fx returns right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0123, 0x4001, &com_buff, 2); + + /* Set the dropdown "Effect" to the first option */ + memset(com_buff, 0x00, 4); + com_buff[0] = 0x00; + com_buff[1] = 0x00; + com_buff[2] = 0x00; + com_buff[3] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0200, 0x4301, &com_buff, 1); + + /* Set the effect duration to 0 */ + memset(com_buff, 0x00, 4); + com_buff[0] = 0x00; + com_buff[1] = 0x00; + com_buff[2] = 0x00; + com_buff[3] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0400, 0x4301, &com_buff, 2); + + /* Set the effect volume and feedback to 0 */ + memset(com_buff, 0x00, 4); + com_buff[0] = 0x00; + com_buff[1] = 0x00; + com_buff[2] = 0x00; + com_buff[3] = 0x00; + /* feedback: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0500, 0x4301, &com_buff, 1); + /* volume: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0300, 0x4301, &com_buff, 1); + + /* Set soft button hold duration */ + memset(com_buff, 0x00, 4); + com_buff[0] = 0x05; + com_buff[1] = 0x00; + com_buff[2] = 0x00; + com_buff[3] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 3, 0x21, 0x0005, 0x2001, &com_buff, 1); + + /* Use dim LEDs for button of state */ + memset(com_buff, 0x00, 4); + com_buff[0] = 0x00; + com_buff[1] = 0x00; + com_buff[2] = 0x00; + com_buff[3] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 3, 0x21, 0x0004, 0x2001, &com_buff, 1); + + return; +} + +#define MBOX3_DESCRIPTOR_SIZE 464 + +static int snd_usb_mbox3_boot_quirk(struct usb_device *dev) +{ + struct usb_host_config *config = dev->actconfig; + int err; + int descriptor_size; + + descriptor_size = le16_to_cpu(get_cfg_desc(config)->wTotalLength); + + if (descriptor_size != MBOX3_DESCRIPTOR_SIZE) { + dev_err(&dev->dev, "Invalid descriptor size=%d.\n", descriptor_size); + return -ENODEV; + } + + dev_dbg(&dev->dev, "device initialised!\n"); + + err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, + &dev->descriptor, sizeof(dev->descriptor)); + config = dev->actconfig; + if (err < 0) + dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err); + + err = usb_reset_configuration(dev); + if (err < 0) + dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err); + dev_dbg(&dev->dev, "mbox3_boot: new boot length = %d\n", + le16_to_cpu(get_cfg_desc(config)->wTotalLength)); + + mbox3_setup_48_24_magic(dev); + dev_info(&dev->dev, "Digidesign Mbox 3: 24bit 48kHz"); + + return 0; /* Successful boot */ +} #define MICROBOOK_BUF_SIZE 128 @@ -1324,6 +1631,10 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev, case USB_ID(0x0dba, 0x3000): /* Digidesign Mbox 2 */ return snd_usb_mbox2_boot_quirk(dev); + case USB_ID(0x0dba, 0x5000): + /* Digidesign Mbox 3 */ + return snd_usb_mbox3_boot_quirk(dev); + case USB_ID(0x1235, 0x0010): /* Focusrite Novation Saffire 6 USB */ case USB_ID(0x1235, 0x0018): /* Focusrite Novation Twitch */ -- 2.35.1

4 8

[PATCH][next] ASoC: q6asm: use kcalloc() instead of kzalloc()
by Gustavo A. R. Silva 28 Jul '22

28 Jul '22

Use 2-factor multiplication argument form kcalloc() instead of kzalloc(). Link: https://github.com/KSPP/linux/issues/162 Signed-off-by: Gustavo A. R. Silva <gustavoars(a)kernel.org> --- sound/soc/qcom/qdsp6/q6asm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/qcom/qdsp6/q6asm.c b/sound/soc/qcom/qdsp6/q6asm.c index 9251d8548965..195780f75d05 100644 --- a/sound/soc/qcom/qdsp6/q6asm.c +++ b/sound/soc/qcom/qdsp6/q6asm.c @@ -513,7 +513,7 @@ int q6asm_map_memory_regions(unsigned int dir, struct audio_client *ac, return 0; } - buf = kzalloc(((sizeof(struct audio_buffer)) * periods), GFP_ATOMIC); + buf = kcalloc(periods, sizeof(*buf), GFP_ATOMIC); if (!buf) { spin_unlock_irqrestore(&ac->lock, flags); return -ENOMEM; -- 2.27.0

3 2

[PATCH v3 0/2] Fix apq8016 compat string
by Bryan O'Donoghue 28 Jun '22

28 Jun '22

V3: - Marks qcom,lpass-cpu-apq8016 as deprecated instead of removing - Bjorn V2: - Adds Reviewed-by: - Srini - Adds Fixes - Srini V1: Reusing the apq8016 on msm8939 I found running checkpatch that the compat string for the LPASS was throwing a warning. This is easily fixed by alinging the YAML, DTS and driver to the documented compat string - compatible = "qcom,lpass-cpu-apq8016"; + compatible = "qcom,apq8016-lpass-cpu"; Bryan O'Donoghue (2): ASoC: qcom: lpass: Fix apq8016 compat string to match yaml arm64: dts: qcom: Fix apq8016 compat string to match yaml arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +- sound/soc/qcom/lpass-apq8016.c | 1 + sound/soc/qcom/lpass-cpu.c | 5 +++++ 3 files changed, 7 insertions(+), 1 deletion(-) -- 2.35.1

3 5

[PATCH 1/4] ASoC: fsl-asoc-card: add WM8904 support
by Alifer Moraes 21 Jun '22

21 Jun '22

From: Pierluigi Passaro <pierluigi.p(a)variscite.com> The codec WM8904 can use internal FLL as PLL source. Whenever the PLL source is not an external MCLK, this source must be setup during hw_params callback otherwise the BCLK could be wrongly evaluated. The SND_SOC_BIAS_PREPARE event is raised after the hw_params callback, so there is no need to set again PLL and SYSCLK and actually there's no need at all the set_bias_level function. Also, when esai is used, a dedicated snd_soc_dai_set_tdm_slot call is required. Signed-off-by: Pierluigi Passaro <pierluigi.p(a)variscite.com> Signed-off by: Alifer Moraes <alifer.m(a)variscite.com> --- sound/soc/fsl/fsl-asoc-card.c | 47 +++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c index 5ee945505281..817dbc1ec635 100644 --- a/sound/soc/fsl/fsl-asoc-card.c +++ b/sound/soc/fsl/fsl-asoc-card.c @@ -23,6 +23,7 @@ #include "imx-audmux.h" #include "../codecs/sgtl5000.h" +#include "../codecs/wm8904.h" #include "../codecs/wm8962.h" #include "../codecs/wm8960.h" #include "../codecs/wm8994.h" @@ -257,6 +258,38 @@ static int fsl_asoc_card_hw_free(struct snd_pcm_substream *substream) } } + if (of_device_is_compatible(dev->of_node, "fsl,imx-audio-wm8904")) { + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); + unsigned int pll_out; + + ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0, 0, 2, + params_physical_width(params)); + if (ret) { + dev_err(dev, "failed to set TDM slot for cpu dai\n"); + return ret; + } + + if (priv->sample_format == SNDRV_PCM_FORMAT_S24_LE) + pll_out = priv->sample_rate * 384; + else + pll_out = priv->sample_rate * 256; + + ret = snd_soc_dai_set_pll(codec_dai, codec_priv->pll_id, + codec_priv->pll_id, + codec_priv->mclk_freq, pll_out); + if (ret) { + dev_err(dev, "failed to start FLL: %d\n", ret); + return ret; + } + + ret = snd_soc_dai_set_sysclk(codec_dai, codec_priv->fll_id, + pll_out, SND_SOC_CLOCK_IN); + if (ret) { + dev_err(dev, "failed to set SYSCLK: %d\n", ret); + return ret; + } + } + return 0; } @@ -651,6 +684,19 @@ static int fsl_asoc_card_probe(struct platform_device *pdev) priv->codec_priv.fll_id = WM8960_SYSCLK_AUTO; priv->codec_priv.pll_id = WM8960_SYSCLK_AUTO; priv->dai_fmt |= SND_SOC_DAIFMT_CBP_CFP; + } else if (of_device_is_compatible(np, "fsl,imx-audio-wm8904")) { + codec_dai_name = "wm8904-hifi"; + priv->card.set_bias_level = NULL; + priv->codec_priv.mclk_id = WM8904_CLK_FLL; + priv->codec_priv.fll_id = WM8904_CLK_FLL; + priv->codec_priv.pll_id = WM8904_FLL_MCLK; + priv->dai_fmt |= SND_SOC_DAIFMT_CBM_CFM; + if (strstr(cpu_np->name, "esai")) { + priv->cpu_priv.sysclk_freq[TX] = priv->codec_priv.mclk_freq; + priv->cpu_priv.sysclk_freq[RX] = priv->codec_priv.mclk_freq; + priv->cpu_priv.sysclk_dir[TX] = SND_SOC_CLOCK_OUT; + priv->cpu_priv.sysclk_dir[RX] = SND_SOC_CLOCK_OUT; + } } else if (of_device_is_compatible(np, "fsl,imx-audio-ac97")) { codec_dai_name = "ac97-hifi"; priv->dai_fmt = SND_SOC_DAIFMT_AC97; @@ -900,6 +946,7 @@ static const struct of_device_id fsl_asoc_card_dt_ids[] = { { .compatible = "fsl,imx-audio-tlv320aic32x4", }, { .compatible = "fsl,imx-audio-tlv320aic31xx", }, { .compatible = "fsl,imx-audio-sgtl5000", }, + { .compatible = "fsl,imx-audio-wm8904", }, { .compatible = "fsl,imx-audio-wm8962", }, { .compatible = "fsl,imx-audio-wm8960", }, { .compatible = "fsl,imx-audio-mqs", }, -- 2.25.1

4 10

[PATCH] ALSA: pcm: Test for "silence" field in struct "pcm_format_data"
by Fabio M. De Francesco 14 Jun '22

14 Jun '22

Syzbot reports "KASAN: null-ptr-deref Write in snd_pcm_format_set_silence".[1] It is due to missing validation of the "silence" field of struct "pcm_format_data" in "pcm_formats" array. Add a test for valid "pat" and, if it is not so, return -EINVAL. [1] https://lore.kernel.org/lkml/000000000000d188ef05dc2c7279@google.com/ Reported-and-tested-by: syzbot+205eb15961852c2c5974(a)syzkaller.appspotmail.com Signed-off-by: Fabio M. De Francesco <fmdefrancesco(a)gmail.com> --- I wasn't able to figure out the commit for the "Fixes:" tag. If this patch is good, can someone please help with providing this missing information? sound/core/pcm_misc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/core/pcm_misc.c b/sound/core/pcm_misc.c index 4866aed97aac..5588b6a1ee8b 100644 --- a/sound/core/pcm_misc.c +++ b/sound/core/pcm_misc.c @@ -433,7 +433,7 @@ int snd_pcm_format_set_silence(snd_pcm_format_t format, void *data, unsigned int return 0; width = pcm_formats[(INT)format].phys; /* physical width */ pat = pcm_formats[(INT)format].silence; - if (! width) + if (!width || !pat) return -EINVAL; /* signed or 1 byte data */ if (pcm_formats[(INT)format].signd == 1 || width <= 8) { -- 2.34.1

3 8

[PATCH v2 00/14] ASoC: Intel: avs: Topology and path management
by Cezary Rojewski 10 Jun '22

10 Jun '22

A continuation of avs-driver initial series [1]. This chapter covers path management and topology parsing part which was ealier path of the main series. The two patches that represented these two subjects in the initial series, have been split into many to allow for easier review and discussion. AVS topology is split into two major parts: dictionaries - found within ASoC topology manifest - and path templates. Dictionaries job is to reduce the total amount of memory occupied by topology elements. Rather than having every pipeline and module carry its own information, each refers to specific entry in specific dictionary by provided (from topology file) indexes. In consequence, most struct avs_tplg_xxx are made out of pointers. Path templates are similar to path descriptions found in skylake-driver and they describe how given path shall look like in runtime - number of modules and pipelines that shape it and how they are laid out. A single path template is tied either to FE or BE and thus at most to a single, user-visible endpoint when speaking of FE. Path is a software representation of its ADSP firmware equivalent. It's a logical container for pipelines which are themselves containers - this time for modules i.e. processing units. Depending on the number of audio formats supported, each path template may carry one or more descriptions of given path. During runtime, when audio format is known, description matching said format is selected and used when instantiating path on ADSP firmware side through IPCs. Changes v1 -> v2: - fixed 'set but not used' warning in patch 10/14 as mentioned by ikp builder Changes RFC -> v1: - Plenty of rewordings and spelling fixes as requested by Pierre - any sysfs-functionality-related left in RFC dropped, will be part of separate subject in the future - separated parsing of formatted strings into: "Support link_mask formatted string" patch, increasing series size to 14 patches [1]: https://lore.kernel.org/alsa-devel/20220207122108.3780926-1-cezary.rojewski… Cezary Rojewski (14): ASoC: Intel: avs: Declare vendor tokens ASoC: Intel: avs: Add topology parsing infrastructure ASoC: Intel: avs: Parse module-extension tuples ASoC: Intel: avs: Parse pplcfg and binding tuples ASoC: Intel: avs: Parse pipeline and module tuples ASoC: Intel: avs: Parse path and path templates tuples ASoC: Intel: avs: Add topology loading operations ASoC: Intel: avs: Support link_mask formatted string ASoC: Intel: avs: Declare path and its components ASoC: Intel: avs: Path creation and freeing ASoC: Intel: avs: Path state management ASoC: Intel: avs: Arm paths after creating them ASoC: Intel: avs: Prepare modules before bindings them ASoC: Intel: avs: Configure modules according to their type include/uapi/sound/intel/avs/tokens.h | 126 ++ sound/soc/intel/Kconfig | 2 + sound/soc/intel/avs/Makefile | 3 +- sound/soc/intel/avs/avs.h | 23 + sound/soc/intel/avs/path.c | 1005 ++++++++++++++++ sound/soc/intel/avs/path.h | 72 ++ sound/soc/intel/avs/topology.c | 1600 +++++++++++++++++++++++++ sound/soc/intel/avs/topology.h | 194 +++ 8 files changed, 3024 insertions(+), 1 deletion(-) create mode 100644 include/uapi/sound/intel/avs/tokens.h create mode 100644 sound/soc/intel/avs/path.c create mode 100644 sound/soc/intel/avs/path.h create mode 100644 sound/soc/intel/avs/topology.c create mode 100644 sound/soc/intel/avs/topology.h base-commit: bc55cfd5718c7c23e5524582e9fa70b4d10f2433 -- 2.25.1

3 19