February 2022 - Alsa-devel - mailman.alsa-project.org

[PATCH] ASoC: es7134: Use modern ASoC DAI format terminology
by Mark Brown 28 Feb '22

28 Feb '22

As part of moving to remove the old style defines for the bus clocks update the es7134 driver to use more modern terminology for clocking. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- sound/soc/codecs/es7134.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/es7134.c b/sound/soc/codecs/es7134.c index e2b79879354b..f443351677df 100644 --- a/sound/soc/codecs/es7134.c +++ b/sound/soc/codecs/es7134.c @@ -94,7 +94,7 @@ static int es7134_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) SND_SOC_DAIFMT_MASTER_MASK); if (fmt != (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBS_CFS)) { + SND_SOC_DAIFMT_CBC_CFC)) { dev_err(codec_dai->dev, "Invalid DAI format\n"); return -EINVAL; } -- 2.30.2

1 1

[PATCH 00/17] ASoC: Intel: AVS - Audio DSP for cAVS
by Cezary Rojewski 28 Feb '22

28 Feb '22

A continuation of cleanup work of Intel SST solutions found in sound/soc/intel/. With two major chapters released last year catpt [1] and removal of haswell solution [2], time has come for Skylake-driver. Througout 2019, 2020 and 2021 Skylake-driver has had many fixes applied and even attempts of refactors as seen in fundamental overhaul [3], IPC flow adjustments [4] and LARGE_CONFIG overhaul [5] series. Unfortunately, story repeats itself - problems are found within the core of a driver. Painting it with different colors does not change the fact that is it still a house of cards. As changes needed to address those issues would make Skylake solution incompatible with its previous revisions, a decision has been made to provide a new solution instead. In time it would deprecate and replace Skylake-driver. That solution has been called AVS - from AudioDSP architecture name: Audio-Voice-Speech. It is meant to provide support for the exact same range of platforms as its predecessor: SKL, KBL, AML and APL. Note: this series is dependent upon HDA-series [6] which exposes several codec-organization functions allowing for reduced code size on avs-driver side. Note: this series does not add fully functional driver as its size would get out of control. Here, focus is put on adding IPC protocol and code loading code. Changes RFC v1 [7]: -> v1: - separated HDA codec-organization patches, path and topology handling, PCM and complementary features such as recovery from this series to ease the review process - fixed EXPORT_SYMBOL_GPL for exported members of ASoC framework - result of stall() is now checked when sending ROM message - result of snd_hdac_ext_stream_set_spib() is now checked when loading basefw - if basefw is not ready, notification processing is now skipped - documented several topology parsing helpers Changes [internal] RFC v2 -> [public] RFC v1: - dropped any sysfs related changes from this series, moved to follow up one - dropped entire subscription-mechanism found in ipc.c. Handlers that are delegated to service certain firmware notifications are now called directly - fixed kernel doc for snd_soc_dapm_new_dai_widgets() as reported by ikp - prefixed snd_hda_codec_device_init() as suggested by Amadeo - improved comments for d0ix transitions for APL-based platforms as suggested by Pierre - a ton of spelling related fixes in most of the commit messages - fixed remaining warnings pointed by scan-build (variable assigned but not used) - replaced most of 'cAVS X.Y' expression usages with 'platform-based' equivalents as suggested by Pierre e.g.: cAVS 1.5 -> SKL-based Changes [internal] RFC v1 -> [internal] RFC v2: - fixed memleak caused by lack of kfree(vols) if memory allocation fails in avs_peakvol_create() as reported by Curtis - fixed missing 'i' iterator incrementation in avs_widget_ready() causing reference loss as reported by Curtis - replace hardcode: 0x40 usage with snd_hdac_calc_stream_format as suggested by Curtis. In consequence, readability for all code loading (CL) procedues has increased and such approach auto-documents the CL stream preparation - updated behavior of all index-fetching functions found in utils.c: avs_module_entry_index(), avs_module_id_entry_index() and follow ups: avs_get_module_entry(), avs_get_module_id_entry() to better conform to linux-kernel standard when no entry is found (return -ENOENT) rather than C++ standard (return -1, what in kernel case translated to -EPERM) as suggested by Curtis and Peter - several suggestions have been made regarding spacing, and so far, I've agreed and applied with all of them. None proposed seemed out of place or redundant - avs_path_stop() renamed to avs_path_pause() pipeline states are represented by RESET/PAUSED/RUNNING. avs_path_reset() and avs_path_run() were already there and avs_path_stop() just didn't look cohesive - added missing parsers for num_output_pin and num_input_pin which are required for custom modules such as WAVES or DSM - dropped 'priv_param_length' from custom module descriptor as this field is obsolete in firmware - parse_dictionary() has been split into parse_dictionary_header() and parse_dictionary_entries() to drop code duplication present in several parsing function which could not re-use entire parse_dictionary() - added avs_tplg_vendor_array_lookup_next() and avs_tplg_vendor_entry_next() to drop code duplicated present in several parsing functions. This change greatly impacted readability of all parsers - parsing helpers such avs_tplg_vendor_array_lookup() now return offset by updating specified in function argument list u32 *offset variable. This is to address problem when u32 offset would be greater than max int, which is the return type for these functions - AVS_DEFINE_PTR_PARSER() macro has been introduced to drop code duplication for all ptr-parsing users - all struct avs_path_module creators have had their declaration updated: function argument *owner ceased to exist as it could already be accessed by mod->owner - fixed the order of operation for conditional paths (e.g.: echo reference) so these are no longer controlled by "source" path and instead are impacted by state changes of source and sink paths both. Previously only source path e.g. playback sourcing echo reference would trigger RUNNING status for conditional path. Equivalent RUNNING on WoV path which is in this case sink path, would not do so, leading to order-of-operation problems. Behavior has been changed to: both source and sink need to be RUNNING for conditional path to be set to RUNNING too. PAUSED for either source or sink will cause PAUSED transition for conditional path. - to achieve the above, path states are now saved in 'state' i.e. new u32 field for struct avs_path - resigned from fw_filename field usage in favour of newly added tplg_filename for machine board descriptors as suggested by Pierre - platform descriptor fields have had their names update better reflect their purpose as suggested by Pierre - fixed comp_list missing locking when manipulated - all message senders now accept request as pointer as suggeseted by Peter - resigned of AZX_ usage for all ADSP-related registers, leaving them only for HOST memory space related operations - fixed disable path for core DSP operations: power/reset/stall as reported by Peter - safety when locking between received responses (reply vs notification) has been lowered as suggested by Pierre. Most usages are not performed in IRQ context and none is done in hard-IRQ one - s/master/main/ plus AVS_MAIN_CORE_MASK has replaced ->master_mask - several functions have had their logging updated - logs have been moved to lower level functions as suggested by Pierre - hdac_ext_stream usage has been streamlined to estream, hdac_streams are represented by hstream instead - hw_params() are resilient to scenarios when they are called mutliple times as reported by Pierre - avs_dsp_enable() now collapses if any of its steps fails as reported by Pierre and Peter - avs_module_ida_empty() now returns value of type bool as suggested by Bard [1]: https://www.spinics.net/lists/alsa-devel/msg116440.html [2]: https://www.spinics.net/lists/alsa-devel/msg116901.html [3]: https://www.spinics.net/lists/alsa-devel/msg94199.html [4]: https://www.spinics.net/lists/alsa-devel/msg92588.html [5]: https://lore.kernel.org/all/20190808181549.12521-1-cezary.rojewski@intel.co… [6]: https://lore.kernel.org/alsa-devel/20220207114906.3759800-1-cezary.rojewski… [7]: https://lore.kernel.org/all/20211208111301.1817725-1-cezary.rojewski@intel.… Cezary Rojewski (17): ALSA: hda: Add helper macros for DSP capable devices ASoC: Export DAI register and widget ctor and dctor functions ASoC: Intel: Introduce AVS driver ASoC: Intel: avs: Inter process communication ASoC: Intel: avs: Add code loading requests ASoC: Intel: avs: Add pipeline management requests ASoC: Intel: avs: Add module management requests ASoC: Intel: avs: Add power management requests ASoC: Intel: avs: Add ROM requests ASoC: Intel: avs: Add basefw runtime-parameter requests ASoC: Intel: avs: Firmware resources management utilities ASoC: Intel: avs: Declare module configuration types ASoC: Intel: avs: Dynamic firmware resources management ASoC: Intel: avs: General code loading flow ASoC: Intel: avs: Implement CLDMA transfer ASoC: Intel: avs: Code loading over CLDMA ASoC: Intel: avs: Code loading over HDA include/sound/hdaudio.h | 2 + include/sound/hdaudio_ext.h | 49 ++ include/sound/soc-dapm.h | 1 + sound/soc/intel/Kconfig | 15 + sound/soc/intel/Makefile | 1 + sound/soc/intel/avs/Makefile | 6 + sound/soc/intel/avs/avs.h | 226 ++++++++++ sound/soc/intel/avs/cldma.c | 328 ++++++++++++++ sound/soc/intel/avs/cldma.h | 29 ++ sound/soc/intel/avs/core.c | 62 +++ sound/soc/intel/avs/dsp.c | 303 +++++++++++++ sound/soc/intel/avs/ipc.c | 410 +++++++++++++++++ sound/soc/intel/avs/loader.c | 594 +++++++++++++++++++++++++ sound/soc/intel/avs/messages.c | 642 +++++++++++++++++++++++++++ sound/soc/intel/avs/messages.h | 762 ++++++++++++++++++++++++++++++++ sound/soc/intel/avs/registers.h | 75 ++++ sound/soc/intel/avs/utils.c | 282 ++++++++++++ sound/soc/soc-core.c | 1 + sound/soc/soc-dapm.c | 15 + 19 files changed, 3803 insertions(+) create mode 100644 sound/soc/intel/avs/Makefile create mode 100644 sound/soc/intel/avs/avs.h create mode 100644 sound/soc/intel/avs/cldma.c create mode 100644 sound/soc/intel/avs/cldma.h create mode 100644 sound/soc/intel/avs/core.c create mode 100644 sound/soc/intel/avs/dsp.c create mode 100644 sound/soc/intel/avs/ipc.c create mode 100644 sound/soc/intel/avs/loader.c create mode 100644 sound/soc/intel/avs/messages.c create mode 100644 sound/soc/intel/avs/messages.h create mode 100644 sound/soc/intel/avs/registers.h create mode 100644 sound/soc/intel/avs/utils.c -- 2.25.1

3 60

[PATCH v4 1/2] ALSA: core: remove initialise static variables to 0
by Meng Tang 28 Feb '22

28 Feb '22

Initializing the static variable to 0 causes the following error when exec checkpatch: ERROR: do not initialise statics to 0 FILE: sound/sound_core.c:142: static int preclaim_oss = 0; In addition, considering the following way of writing 139: #ifdef config_sound_oss_core_preclaim 140: Static int preclaim_oss = 1; 141: #ELSE 142: Static int preclaim_oss = 0; 143: #ENDIF We can optimize it by IS_ENABLED(CONFIG_SOUND_OSS_CORE_PRECLAIM), so modified it to static int preclaim_oss = IS_ENABLED(CONFIG_SOUND_OSS_CORE_PRECLAIM); Signed-off-by: Meng Tang <tangmeng(a)uniontech.com> Signed-off-by: Joe Perches <joe(a)perches.com> --- sound/sound_core.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/sound/sound_core.c b/sound/sound_core.c index 90d118cd9164..aa4a57e488e5 100644 --- a/sound/sound_core.c +++ b/sound/sound_core.c @@ -136,11 +136,7 @@ struct sound_unit * All these clutters are scheduled to be removed along with * sound-slot/service-* module aliases. */ -#ifdef CONFIG_SOUND_OSS_CORE_PRECLAIM -static int preclaim_oss = 1; -#else -static int preclaim_oss = 0; -#endif +static int preclaim_oss = IS_ENABLED(CONFIG_SOUND_OSS_CORE_PRECLAIM); module_param(preclaim_oss, int, 0444); -- 2.20.1

4 6

[PATCH] ALSA: spi: Add check for clk_enable()
by Jiasheng Jiang 28 Feb '22

28 Feb '22

As the potential failure of the clk_enable(), it should be better to check it and return error if fails. Fixes: 3568459a5113 ("ALSA: at73c213: manage SSC clock") Signed-off-by: Jiasheng Jiang <jiasheng(a)iscas.ac.cn> --- sound/spi/at73c213.c | 27 +++++++++++++++++++++------ 1 file changed, 21 insertions(+), 6 deletions(-) diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c index 76c0e37a838c..8a2da6b1012e 100644 --- a/sound/spi/at73c213.c +++ b/sound/spi/at73c213.c @@ -218,7 +218,9 @@ static int snd_at73c213_pcm_open(struct snd_pcm_substream *substream) runtime->hw = snd_at73c213_playback_hw; chip->substream = substream; - clk_enable(chip->ssc->clk); + err = clk_enable(chip->ssc->clk); + if (err) + return err; return 0; } @@ -776,7 +778,9 @@ static int snd_at73c213_chip_init(struct snd_at73c213 *chip) goto out; /* Enable DAC master clock. */ - clk_enable(chip->board->dac_clk); + retval = clk_enable(chip->board->dac_clk); + if (retval) + goto out; /* Initialize at73c213 on SPI bus. */ retval = snd_at73c213_write_reg(chip, DAC_RST, 0x04); @@ -889,7 +893,9 @@ static int snd_at73c213_dev_init(struct snd_card *card, chip->card = card; chip->irq = -1; - clk_enable(chip->ssc->clk); + retval = clk_enable(chip->ssc->clk); + if (retval) + return retval; retval = request_irq(irq, snd_at73c213_interrupt, 0, "at73c213", chip); if (retval) { @@ -1008,7 +1014,9 @@ static int snd_at73c213_remove(struct spi_device *spi) int retval; /* Stop playback. */ - clk_enable(chip->ssc->clk); + retval = clk_enable(chip->ssc->clk); + if (retval) + goto out; ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS)); clk_disable(chip->ssc->clk); @@ -1088,9 +1096,16 @@ static int snd_at73c213_resume(struct device *dev) { struct snd_card *card = dev_get_drvdata(dev); struct snd_at73c213 *chip = card->private_data; + int retval; - clk_enable(chip->board->dac_clk); - clk_enable(chip->ssc->clk); + retval = clk_enable(chip->board->dac_clk); + if (retval) + return retval; + retval = clk_enable(chip->ssc->clk); + if (retval) { + clk_disable(chip->board->dac_clk); + return retval; + } ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXEN)); return 0; -- 2.25.1

2 1

[PATCH] sound/mips: Use platform_get_irq() to get the interrupt
by Meng Tang 28 Feb '22

28 Feb '22

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypassed the hierarchical setup and messed up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by: Meng Tang <tangmeng(a)uniontech.com> --- sound/mips/snd-n64.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/sound/mips/snd-n64.c b/sound/mips/snd-n64.c index 463a6fe589eb..bff6d85b8fe2 100644 --- a/sound/mips/snd-n64.c +++ b/sound/mips/snd-n64.c @@ -289,8 +289,7 @@ static int __init n64audio_probe(struct platform_device *pdev) struct snd_card *card; struct snd_pcm *pcm; struct n64audio *priv; - struct resource *res; - int err; + int err, irq; err = snd_card_new(&pdev->dev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1, @@ -337,12 +336,12 @@ static int __init n64audio_probe(struct platform_device *pdev) strcpy(card->shortname, "N64 Audio"); strcpy(card->longname, "N64 Audio"); - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res) { + irq = platform_get_irq(pdev, 0); + if (irq < 0) { err = -EINVAL; goto fail_dma_alloc; } - if (devm_request_irq(&pdev->dev, res->start, n64audio_isr, + if (devm_request_irq(&pdev->dev, irq, n64audio_isr, IRQF_SHARED, "N64 Audio", priv)) { err = -EBUSY; goto fail_dma_alloc; -- 2.20.1

2 1

[PATCH V0 0/1] ALSA: pcm: fix blocking while loop in
by Raghu Bankapur 28 Feb '22

28 Feb '22

When period interrupts are disabled, while loop in snd_pcm_update_hw_ptr0() results in the machine locking up if runtime->hw_ptr_buffer_jiffies is 0. Validate runtime->hw_ptr_buffer_jiffies value before while loop to avoid delta check. when runtime->hw_ptr_buffer_jiffies is 0 then update of while condition hdelta > xrun_threshold will be always true because hdelta will not change. This will lead to infinite loop causing lock-up This issue found during stability test, below log explains CPU lock-up on CPU1 [ 922.249028] sched: RT throttling activated for rt_rq ffffffc0f9970778 (cpu 1) [ 922.249028] potential CPU hogs: [ 922.249028] **FastCapture (11426) [ 922.249105] ------------[ cut here ]--------- To fix this lock-up issue, added new condition to check if runtime-> hw_ptr_buffer_jiffies is ZERO or negative. Raghu Bankapur (1): ALSA: pcm: fix blocking while loop in snd_pcm_update_hw_ptr0() sound/core/pcm_lib.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) -- 2.17.1

4 5

[PATCH] ASoC: qcom: soundwire: Add support for controlling audio CGCR from HLOS
by Srinivasa Rao Mandadapu 28 Feb '22

28 Feb '22

Add support for controlling soundwire audio CGCR interface using clock framework to make hclk ungating with software. As per new hardware changes, software has to always ungate hclk if soundwire is operational and keep it running. This requirement is for latest LPASS chipsets for RX, TX and WSA path to work. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam(a)quicinc.com> Co-developed-by: Venkata Prasad Potturu <quic_potturu(a)quicinc.com> Signed-off-by: Venkata Prasad Potturu <quic_potturu(a)quicinc.com> --- This patch set depends on: -- Clock driver patches with reset control support, yet to be posted. drivers/soundwire/qcom.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index fb183bd..440aad8 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -12,6 +12,7 @@ #include <linux/of_irq.h> #include <linux/of_device.h> #include <linux/regmap.h> +#include <linux/reset.h> #include <linux/slab.h> #include <linux/slimbus.h> #include <linux/soundwire/sdw.h> @@ -129,6 +130,7 @@ struct qcom_swrm_ctrl { struct device *dev; struct regmap *regmap; void __iomem *mmio; + struct reset_control *audio_cgcr; #ifdef CONFIG_DEBUG_FS struct dentry *debugfs; #endif @@ -618,6 +620,8 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl) val = FIELD_PREP(SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_BMSK, ctrl->rows_index); val |= FIELD_PREP(SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_BMSK, ctrl->cols_index); + reset_control_reset(ctrl->audio_cgcr); + ctrl->reg_write(ctrl, SWRM_MCP_FRAME_CTRL_BANK_ADDR(0), val); /* Enable Auto enumeration */ @@ -1269,6 +1273,9 @@ static int qcom_swrm_probe(struct platform_device *pdev) ctrl->bus.ops = &qcom_swrm_ops; ctrl->bus.port_ops = &qcom_swrm_port_ops; ctrl->bus.compute_params = &qcom_swrm_compute_params; + ctrl->audio_cgcr = devm_reset_control_get_exclusive(dev, "swr_audio_cgcr"); + if (IS_ERR(ctrl->audio_cgcr)) + dev_err(dev, "Failed to get audio_cgcr reset required for soundwire-v1.6.0\n"); ret = qcom_swrm_get_port_config(ctrl); if (ret) -- 2.7.4

2 3

Add UCM for PinePhone
by GitHub pull_request - edited 28 Feb '22

28 Feb '22

alsa-project/alsa-ucm-conf pull request #134 was edited from tomfitzhenry: Fixes https://github.com/alsa-project/alsa-ucm-conf/issues/124. The device-tree configuration has had a unique audio card name since 5.14: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arc… This UCM config is copied from https://gitlab.com/pine64-org/pine64-alsa-ucm/, which was developed by many developers ( https://gitlab.com/pine64-org/pine64-alsa-ucm/-/merge_requests/1 ) and is BSD-3-Clause licensed. I have tested that with this PR, the PinePhone has the expected HiFi and VoiceCall profiles.This testing found that the `File` directive in `SectionUseCase` needs to be absolute (for the symlink to work). I've fixed this in this PR: https://github.com/alsa-project/alsa-ucm-conf/pull/134/commits/5059e57a2197…. See also: * `alsa-info`: https://alsa-project.org/db/?f=5e331f5ef10bd167b3bd7640bfcf0e879100f80d * `pa-info`: [pa-info.txt](https://github.com/alsa-project/alsa-ucm-conf/files/8015083/pa… * https://gitlab.com/pine64-org/pine64-alsa-ucm/-/issues/3 Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/134 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/134.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH v2 0/3] soundwire: qcom: add pm runtime support
by Srinivas Kandagatla 28 Feb '22

28 Feb '22

This patchset adds pm runtime support to Qualcomm SounWire Controller using SoundWire Clock Stop and Wake up using Headset events on supported instances and instances like WSA which do not support clock stop a soft reset of controller along with full rest of slaves is done to resume from a low power state. Tested it on SM8250 MTP and Dragon Board DB845c --srini Changes since v1: - updated wake irq to not deal with slave pm runtime directly. - added delay after soft reset of SoundWire controller where clock stop is not supported Srinivas Kandagatla (3): soundwire: qcom: add runtime pm support dt-bindings: soundwire: qcom: document optional wake irq soundwire: qcom: add in-band wake up interrupt support .../bindings/soundwire/qcom,sdw.txt | 2 +- drivers/soundwire/qcom.c | 202 +++++++++++++++++- 2 files changed, 202 insertions(+), 2 deletions(-) -- 2.21.0

3 8

ucm2: add additional symlink for Pinebook Pro
by GitHub pull_request - opened 28 Feb '22

28 Feb '22

alsa-project/alsa-ucm-conf pull request #140 was opened from kmcopper: since 907f0a305186 ASoC: simple-card: Fill in driver name of the linux kernel, the base name is simple-card instead of rockchip_es8316 Fixes: 85eea19783cf ("ucm2: Add UCM support for rockchip_es8316 on Pinebook Pro") Signed-off-by: Kyle Copperfield <kmcopper(a)danwin1210.me> Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/140 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/140.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0