October 2022 - Alsa-devel - mailman.alsa-project.org

[PATCH 0/6] ASoC: samsung: fsd: audio support for FSD SoC
by Padmanabhan Rajanbabu 03 Jan '23

03 Jan '23

The intention of this patch series is to enable audio support on FSD SoC. The following features are added in samsung I2S interface: 1. Add TDM support on samsung I2S interface 2. Allow sound card to directly configure prescaler divider instead of calculating it from frame clock Also the sound card support for FSD SoC is added, which utilizes samsung I2S interface as CPU DAI. This patch is dependent on fsd-pinctrl fixes patch series [1] [1]: https://lkml.org/lkml/2022/10/13/257 Padmanabhan Rajanbabu (6): ASoC: samsung: i2s: TDM Support for CPU DAI driver ASoC: samsung: i2s: configure PSR from sound card dt-bindings: sound: Add sound card bindings for Tesla FSD ASoC: samsung: fsd: Add FSD soundcard driver arm64: dts: fsd: Add I2S DAI node for Tesla FSD arm64: dts: fsd: Add sound card node for Tesla FSD .../bindings/sound/tesla,fsd-card.yaml | 158 ++++++++ arch/arm64/boot/dts/tesla/fsd-evb.dts | 57 +++ arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi | 14 + arch/arm64/boot/dts/tesla/fsd.dtsi | 41 ++ sound/soc/samsung/Kconfig | 12 + sound/soc/samsung/Makefile | 2 + sound/soc/samsung/fsd-card.c | 349 ++++++++++++++++++ sound/soc/samsung/i2s-regs.h | 17 + sound/soc/samsung/i2s.c | 120 +++++- sound/soc/samsung/i2s.h | 1 + 10 files changed, 766 insertions(+), 5 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/tesla,fsd-card.yaml create mode 100644 sound/soc/samsung/fsd-card.c -- 2.17.1

5 32

Regression playing 24bit/96kHz audio on USB audio interface between 5.10.94 and 5.15.21
by Ruud van Asseldonk 02 Jan '23

02 Jan '23

Hi, I have a program that configures a Behringer UMC404HD 192k USB audio interface for playback as follows (pseudocode): snd_pcm_hw_params_set_channels(pcm, hwp, 2); snd_pcm_hw_params_set_format(pcm, hwp, SND_PCM_FORMAT_S24_3LE); snd_pcm_hw_params_set_access(pcm, hwp, SND_PCM_ACCESS_MMAP_INTERLEAVED); snd_pcm_hw_params_set_rate(pcm, hwp, val=96000, dir=0); snd_pcm_hw_params_set_period_size_near(pcm, hwp, val=513, dir=0); // If I confirm at this point with snd_pcm_hw_params_get_period_size, // I get back 513. snd_pcm_hw_params_set_buffer_size_near(pcm, hwp, val=2052); snd_pcm_hw_params(pcm, hwp); // If I confirm with snd_pcm_hw_params_get_buffer_size, // I get back 2052. On Linux 5.10.94 (specifically Arch Linux ARM package linux-rpi-5.10.94-1), this succeeds, and I can play back audio just fine. On 5.15.21 (specifically linux-rpi-5.15.21-3), all the calls succeed apart from the last one, which returns EINVAL. (My actual program is written in Rust and uses a Rust wrapper library for libasound, https://docs.rs/alsa/0.6.0/alsa/, but the calls should be the ones listed.) I confirmed with snd_pcm_hw_params_test_format that the S24_3LE format is supported. On both kernels it is successful. I confirmed with snd_pcm_hw_params_test_rate that 96 kHz is supported. On both kernels it is successful. There are differences though. When I query these: snd_pcm_hw_params_get_period_size_min snd_pcm_hw_params_get_period_size_max snd_pcm_hw_params_get_buffer_size_min snd_pcm_hw_params_get_buffer_size_max Then on 5.10.94 (the good version), I get: period size min/max: 12/32768, buffer size min/max: 24/65536 But on 5.15.21 (the bad version), I get: period size min/max: 13/71332, buffer size min/max: 26/142663 Also, after I set the period size to 513, if I then query the buffer size min/max, on 5.10.94 I get: buffer size min/max: 1026/65536 But on 5.15.21 I get: buffer size min/max: 1027/142663 In lsmod, snd_usb_audio shows up, and from lsusb -v, the UMC404HD appears to be a standard USB audio interface. The lsusb output is identical on both kernels. Please let me know if there is anything I can do to help further diagnose the issue, or if I should report this elsewhere. Kind regards, Ruud van Asseldonk

5 10

[PATCH 0/4] Make QMI message rules const
by Jeff Johnson 07 Dec '22

07 Dec '22

Change ff6d365898d ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const. So now update the definitions in the various client to take advantage of this. Patches for ath10k and ath11k were perviously sent separately. This series depends upon: https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git/commit/?h=fo… This is in the for-next banch of: git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git Hence this series is also based upon that tree/branch. Jeff Johnson (4): net: ipa: Make QMI message rules const remoteproc: sysmon: Make QMI message rules const slimbus: qcom-ngd-ctrl: Make QMI message rules const soc: qcom: pdr: Make QMI message rules const drivers/net/ipa/ipa_qmi_msg.c | 20 ++++++++++---------- drivers/net/ipa/ipa_qmi_msg.h | 20 ++++++++++---------- drivers/remoteproc/qcom_sysmon.c | 8 ++++---- drivers/slimbus/qcom-ngd-ctrl.c | 8 ++++---- drivers/soc/qcom/pdr_internal.h | 20 ++++++++++---------- 5 files changed, 38 insertions(+), 38 deletions(-) -- 2.37.0

4 17

[PATCH v2 00/12] ASoC: mediatek: Add support for MT8188 SoC
by Trevor Wu 01 Dec '22

01 Dec '22

This series of patches adds support for Mediatek AFE of MT8188 SoC. Patches are based on broonie tree "for-next" branch. Changes since v1: - remove bus protection functions in case of unmerged dependency problem - replace some bit operation macro with FIELD_PREP - simplify register control by regmap_set_bits and regmap_clear_bits - fix dt-binding errors - rename compatible string for recognition Trevor Wu (12): ASoC: mediatek: common: add SMC ops and SMC CMD ASoC: mediatek: mt8188: add common header ASoC: mediatek: mt8188: support audsys clock ASoC: mediatek: mt8188: support adda in platform driver ASoC: mediatek: mt8188: support etdm in platform driver ASoC: mediatek: mt8188: support pcmif in platform driver ASoC: mediatek: mt8188: support audio clock control ASoC: mediatek: mt8188: add platform driver ASoC: mediatek: mt8188: add control for timing select dt-bindings: mediatek: mt8188: add audio afe document ASoC: mediatek: mt8188: add machine driver with mt6359 dt-bindings: mediatek: mt8188: add mt8188-mt6359 document .../bindings/sound/mt8188-afe-pcm.yaml | 187 + .../bindings/sound/mt8188-mt6359.yaml | 64 + sound/soc/mediatek/Kconfig | 23 + sound/soc/mediatek/Makefile | 1 + sound/soc/mediatek/common/mtk-base-afe.h | 19 + sound/soc/mediatek/mt8188/Makefile | 15 + sound/soc/mediatek/mt8188/mt8188-afe-clk.c | 656 ++++ sound/soc/mediatek/mt8188/mt8188-afe-clk.h | 114 + sound/soc/mediatek/mt8188/mt8188-afe-common.h | 151 + sound/soc/mediatek/mt8188/mt8188-afe-pcm.c | 3359 +++++++++++++++++ sound/soc/mediatek/mt8188/mt8188-audsys-clk.c | 206 + sound/soc/mediatek/mt8188/mt8188-audsys-clk.h | 15 + .../soc/mediatek/mt8188/mt8188-audsys-clkid.h | 83 + sound/soc/mediatek/mt8188/mt8188-dai-adda.c | 631 ++++ sound/soc/mediatek/mt8188/mt8188-dai-etdm.c | 2596 +++++++++++++ sound/soc/mediatek/mt8188/mt8188-dai-pcm.c | 366 ++ sound/soc/mediatek/mt8188/mt8188-mt6359.c | 808 ++++ sound/soc/mediatek/mt8188/mt8188-reg.h | 3180 ++++++++++++++++ 18 files changed, 12474 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/mt8188-afe-pcm.yaml create mode 100644 Documentation/devicetree/bindings/sound/mt8188-mt6359.yaml create mode 100644 sound/soc/mediatek/mt8188/Makefile create mode 100644 sound/soc/mediatek/mt8188/mt8188-afe-clk.c create mode 100644 sound/soc/mediatek/mt8188/mt8188-afe-clk.h create mode 100644 sound/soc/mediatek/mt8188/mt8188-afe-common.h create mode 100644 sound/soc/mediatek/mt8188/mt8188-afe-pcm.c create mode 100644 sound/soc/mediatek/mt8188/mt8188-audsys-clk.c create mode 100644 sound/soc/mediatek/mt8188/mt8188-audsys-clk.h create mode 100644 sound/soc/mediatek/mt8188/mt8188-audsys-clkid.h create mode 100644 sound/soc/mediatek/mt8188/mt8188-dai-adda.c create mode 100644 sound/soc/mediatek/mt8188/mt8188-dai-etdm.c create mode 100644 sound/soc/mediatek/mt8188/mt8188-dai-pcm.c create mode 100644 sound/soc/mediatek/mt8188/mt8188-mt6359.c create mode 100644 sound/soc/mediatek/mt8188/mt8188-reg.h -- 2.18.0

6 28

[PATCH -next] ASoC: pcm512x: Fix PM disable depth imbalance in pcm512x_probe
by Zhang Qilong 29 Nov '22

29 Nov '22

The pm_runtime_enable will increase power disable depth. Thus a pairing decrement is needed on the error handling path to keep it balanced according to context. We fix it by going to err_pm instead of err_clk. Fixes:f086ba9d5389c ("ASoC: pcm512x: Support mastering BCLK/LRCLK using the PLL") Signed-off-by: Zhang Qilong <zhangqilong3(a)huawei.com> --- sound/soc/codecs/pcm512x.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/pcm512x.c b/sound/soc/codecs/pcm512x.c index 767463e82665..89059a673cf0 100644 --- a/sound/soc/codecs/pcm512x.c +++ b/sound/soc/codecs/pcm512x.c @@ -1634,7 +1634,7 @@ int pcm512x_probe(struct device *dev, struct regmap *regmap) if (val > 6) { dev_err(dev, "Invalid pll-in\n"); ret = -EINVAL; - goto err_clk; + goto err_pm; } pcm512x->pll_in = val; } @@ -1643,7 +1643,7 @@ int pcm512x_probe(struct device *dev, struct regmap *regmap) if (val > 6) { dev_err(dev, "Invalid pll-out\n"); ret = -EINVAL; - goto err_clk; + goto err_pm; } pcm512x->pll_out = val; } @@ -1652,12 +1652,12 @@ int pcm512x_probe(struct device *dev, struct regmap *regmap) dev_err(dev, "Error: both pll-in and pll-out, or none\n"); ret = -EINVAL; - goto err_clk; + goto err_pm; } if (pcm512x->pll_in && pcm512x->pll_in == pcm512x->pll_out) { dev_err(dev, "Error: pll-in == pll-out\n"); ret = -EINVAL; - goto err_clk; + goto err_pm; } } #endif -- 2.25.1

2 1

[PATCH 0/2] ASoC: Add a driver for the Iron Device SMA1303 Amp
by Kiseok Jo 29 Nov '22

29 Nov '22

This adds basic audio support for the Iron Device SMA1303 amplifier. Kiseok Jo (2): ASoC: sma1303: Add driver for Iron Device SMA1303 Amp ASoC: dt-bindings: sma1303: Iron Device SMA1303 Amp .../bindings/sound/irondevice,sma1303.yaml | 40 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + sound/soc/codecs/Kconfig | 7 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/sma1303.c | 2119 +++++++++++++++++ sound/soc/codecs/sma1303.h | 609 +++++ 6 files changed, 2779 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/irondevice,sma1303.yaml create mode 100644 sound/soc/codecs/sma1303.c create mode 100644 sound/soc/codecs/sma1303.h -- 2.30.2

2 3

[PATCH 0/4] RK3588 Audio Support
by Nicolas Frattaroli 25 Nov '22

25 Nov '22

This patchset refactors the Rockchip I2S/TDM driver in order to support the RK3588 SoC, and then adds the necessary compatible string to load the driver for it. Patch 1 rectifies a problem with the bindings where we were too strict about requiring the rockchip,grf property. Most features of this audio device don't need access to the GRF to function. Patch 2 modifies the driver to adjust its behaviour to what the changed bindings now allow, namely using most things without the GRF. Patch 3 and 4 are boring compatible string stuff that enables RK3588 support. No special data is needed to initialise the driver for this instance of the I2S/TDM IP. Nicolas Frattaroli (4): ASoC: dt-bindings: rockchip: i2s-tdm: Make grf property optional ASoC: rockchip: i2s_tdm: Make the grf property optional ASoC: dt-bindings: rockchip: i2s-tdm: Add RK3588 compatible ASoC: rockchip: i2s_tdm: Add support for RK3588 .../bindings/sound/rockchip,i2s-tdm.yaml | 2 +- sound/soc/rockchip/rockchip_i2s_tdm.c | 19 ++++++++++++++----- 2 files changed, 15 insertions(+), 6 deletions(-) -- 2.38.1

3 8

[PATCH 0/3] ASoC: adau1372: fixes after debugging custom board
by Maarten Zanders 25 Nov '22

25 Nov '22

Maarten Zanders (3): ASoC: adau1372: fix mclk ASoC: adau1372: add support for S24_LE mode ASoC: adau1372: correct PGA enable & mute bit sound/soc/codecs/adau1372.c | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-) base-commit: ef6747add3ad08a23a94b20db0b62688efb9ccd9 -- 2.37.3

3 9

[alsa-devel] [PATCH 0/6] ASoC: mediatek: mt8183: support DP audio
by Tzung-Bi Shih 24 Nov '22

24 Nov '22

(This series depends on https://lore.kernel.org/patchwork/patch/1126819/ which has not applied to the maintainer's tree yet.) This series makes mt8183-mt6358-ts3a227-max98357 support DP (display port) audio output. ASoC: hdmi-codec: add PCM trigger operator - add a PCM trigger callback if codec driver is interested in PCM events. drm: bridge: it6505: bridge to hdmi-codec - add audio feature support of it6505. - bridge to hdmi-codec so that ASoC can use the audio feature. - defer the "enabling" after receiving PCM START or RESUME event. ASoC: dt-bindings: mt8183: add a property "mediatek,hdmi-codec" ASoC: mediatek: mt8183: use hdmi-codec - bind to hdmi-codec in mt8183-mt6358-ts3a227-max98357. drm: bridge: it6505: report connector status ASoC: mediatek: mt8183: support HDMI jack reporting - use the mechanism from the following patch https://mailman.alsa-project.org/pipermail/alsa-devel/2019-September/155302… to report jack status (from DRM to ASoC). Allen Chen (1): drm: bridge: it6505: bridge to hdmi-codec Tzung-Bi Shih (5): ASoC: hdmi-codec: add PCM trigger operator ASoC: dt-bindings: mt8183: add a property "mediatek,hdmi-codec" ASoC: mediatek: mt8183: use hdmi-codec drm: bridge: it6505: report connector status ASoC: mediatek: mt8183: support HDMI jack reporting .../sound/mt8183-mt6358-ts3a227-max98357.txt | 2 + drivers/gpu/drm/bridge/ite-it6505.c | 191 +++++++++++++++++- include/sound/hdmi-codec.h | 13 ++ sound/soc/codecs/hdmi-codec.c | 31 +++ sound/soc/mediatek/Kconfig | 3 +- .../mt8183/mt8183-mt6358-ts3a227-max98357.c | 36 +++- 6 files changed, 266 insertions(+), 10 deletions(-) -- 2.23.0.866.gb869b98d4c-goog

3 9

[RESEND PATCH] ASoC: core: Exit all links before removing their components
by Cezary Rojewski 20 Nov '22

20 Nov '22

Flows leading to link->init() and link->exit() are not symmetric. Currently the relevant part of card probe sequence goes as: for_each_card_rtds(card, rtd) for_each_rtd_components(rtd, i, component) component->probe() for_each_card_rtds(card, rtd) for_each_rtd_dais(rtd, i, dai) dai->probe() for_each_card_rtds(card, rtd) rtd->init() On the other side, equivalent remove sequence goes as: for_each_card_rtds(card, rtd) for_each_rtd_dais(rtd, i, dai) dai->remove() for_each_card_rtds(card, rtd) for_each_rtd_components(rtd, i, component) component->remove() for_each_card_rtds(card, rtd) rtd->exit() what can lead to errors as link->exit() may still operate on resources owned by its components despite the probability of them being freed during the component->remove(). This change modifies the remove sequence to: for_each_card_rtds(card, rtd) rtd->exit() for_each_card_rtds(card, rtd) for_each_rtd_dais(rtd, i, dai) dai->remove() for_each_card_rtds(card, rtd) for_each_rtd_components(rtd, i, component) component->remove() so code found in link->exit() is safe to touch any component stuff as component->remove() has not been called yet. Signed-off-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> --- Original review for v1: https://lore.kernel.org/alsa-devel/20220621115758.3154933-1-cezary.rojewski… sound/soc/soc-core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 4a3fca50a536..638e781df3b0 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -935,9 +935,6 @@ void snd_soc_remove_pcm_runtime(struct snd_soc_card *card, { lockdep_assert_held(&client_mutex); - /* release machine specific resources */ - snd_soc_link_exit(rtd); - /* * Notify the machine driver for extra destruction */ @@ -1888,6 +1885,9 @@ static void soc_cleanup_card_resources(struct snd_soc_card *card) snd_soc_dapm_shutdown(card); + /* release machine specific resources */ + for_each_card_rtds(card, rtd) + snd_soc_link_exit(rtd); /* remove and free each DAI */ soc_remove_link_dais(card); soc_remove_link_components(card); -- 2.25.1

2 2