May 2021 - Alsa-devel - mailman.alsa-project.org

[PATCH AUTOSEL 5.10 49/85] ASoC: rsnd: call rsnd_ssi_master_clk_start() from rsnd_ssi_init()
by Sasha Levin 05 May '21

05 May '21

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> [ Upstream commit a122a116fc6d8fcf2f202dcd185173a54268f239 ] Current rsnd needs to call .prepare (P) for clock settings, .trigger for playback start (S) and stop (E). It should be called as below from SSI point of view. P -> S -> E -> P -> S -> E -> ... But, if you used MIXer, below case might happen (2) 1: P -> S ---> E -> ... 2: P ----> S -> ... (1) (3) P(1) setups clock, but E(2) resets it. and starts playback (3). In such case, it will reports "SSI parent/child should use same rate". rsnd_ssi_master_clk_start() which is the main function at (P) was called from rsnd_ssi_init() (= S) before, but was moved by below patch to rsnd_soc_dai_prepare() (= P) to avoid using clk_get_rate() which shouldn't be used under atomic context. commit 4d230d1271064 ("ASoC: rsnd: fixup not to call clk_get/set under non-atomic") Because of above patch, rsnd_ssi_master_clk_start() is now called at (P) which is for non atomic context. But (P) is assuming that spin lock is *not* used. One issue now is rsnd_ssi_master_clk_start() is checking ssi->xxx which should be protected by spin lock. After above patch, adg.c had below patch for other reasons. commit 06e8f5c842f2d ("ASoC: rsnd: don't call clk_get_rate() under atomic context") clk_get_rate() is used at probe() timing by this patch. In other words, rsnd_ssi_master_clk_start() is no longer using clk_get_rate() any more. This means we can call it from rsnd_ssi_init() (= S) again which is protected by spin lock. This patch re-move it to under spin lock, and solves 1. checking ssi->xxx without spin lock issue. 2. clk setting / device start / device stop race condition. Reported-by: Linh Phung T. Y. <linh.phung.jy(a)renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Link: https://lore.kernel.org/r/875z0x1jt5.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sh/rcar/ssi.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c index d0ded427a836..a2f8138d40c7 100644 --- a/sound/soc/sh/rcar/ssi.c +++ b/sound/soc/sh/rcar/ssi.c @@ -507,10 +507,15 @@ static int rsnd_ssi_init(struct rsnd_mod *mod, struct rsnd_priv *priv) { struct rsnd_ssi *ssi = rsnd_mod_to_ssi(mod); + int ret; if (!rsnd_ssi_is_run_mods(mod, io)) return 0; + ret = rsnd_ssi_master_clk_start(mod, io); + if (ret < 0) + return ret; + ssi->usrcnt++; rsnd_mod_power_on(mod); @@ -1060,13 +1065,6 @@ static int rsnd_ssi_pio_pointer(struct rsnd_mod *mod, return 0; } -static int rsnd_ssi_prepare(struct rsnd_mod *mod, - struct rsnd_dai_stream *io, - struct rsnd_priv *priv) -{ - return rsnd_ssi_master_clk_start(mod, io); -} - static struct rsnd_mod_ops rsnd_ssi_pio_ops = { .name = SSI_NAME, .probe = rsnd_ssi_common_probe, @@ -1079,7 +1077,6 @@ static struct rsnd_mod_ops rsnd_ssi_pio_ops = { .pointer = rsnd_ssi_pio_pointer, .pcm_new = rsnd_ssi_pcm_new, .hw_params = rsnd_ssi_hw_params, - .prepare = rsnd_ssi_prepare, .get_status = rsnd_ssi_get_status, }; @@ -1166,7 +1163,6 @@ static struct rsnd_mod_ops rsnd_ssi_dma_ops = { .pcm_new = rsnd_ssi_pcm_new, .fallback = rsnd_ssi_fallback, .hw_params = rsnd_ssi_hw_params, - .prepare = rsnd_ssi_prepare, .get_status = rsnd_ssi_get_status, }; -- 2.30.2

1 0

[PATCH AUTOSEL 5.10 33/85] ASoC: rt5670: Add a quirk for the Dell Venue 10 Pro 5055
by Sasha Levin 05 May '21

05 May '21

From: Hans de Goede <hdegoede(a)redhat.com> [ Upstream commit 84cb0d5581b6a7bd5d96013f67e9f2eb0c7b4378 ] Add a quirk with the jack-detect and dmic settings necessary to make jack-detect and the builtin mic work on Dell Venue 10 Pro 5055 tablets. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Link: https://lore.kernel.org/r/20210402140747.174716-5-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/rt5670.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/sound/soc/codecs/rt5670.c b/sound/soc/codecs/rt5670.c index a0c8f58d729b..47ce074289ca 100644 --- a/sound/soc/codecs/rt5670.c +++ b/sound/soc/codecs/rt5670.c @@ -2908,6 +2908,18 @@ static const struct dmi_system_id dmi_platform_intel_quirks[] = { RT5670_GPIO1_IS_IRQ | RT5670_JD_MODE3), }, + { + .callback = rt5670_quirk_cb, + .ident = "Dell Venue 10 Pro 5055", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Venue 10 Pro 5055"), + }, + .driver_data = (unsigned long *)(RT5670_DMIC_EN | + RT5670_DMIC2_INR | + RT5670_GPIO1_IS_IRQ | + RT5670_JD_MODE1), + }, { .callback = rt5670_quirk_cb, .ident = "Aegex 10 tablet (RU2)", -- 2.30.2

1 0

[PATCH AUTOSEL 5.10 29/85] ASoC: Intel: bytcr_rt5640: Add quirk for the Chuwi Hi8 tablet
by Sasha Levin 05 May '21

05 May '21

From: Hans de Goede <hdegoede(a)redhat.com> [ Upstream commit 875c40eadf6ac6644c0f71842a4f30dd9968d281 ] The Chuwi Hi8 tablet is using an analog mic on IN1 and has its jack-detect connected to JD2_IN4N, instead of using the default IN3 for its internal mic and JD1_IN4P for jack-detect. It also only has 1 speaker. Add a quirk applying the correct settings for this configuration. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Link: https://lore.kernel.org/r/20210325221054.22714-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/boards/bytcr_rt5640.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 2d887406ca85..1ef0464249d1 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -514,6 +514,23 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_SSP0_AIF1 | BYT_RT5640_MCLK_EN), }, + { + /* Chuwi Hi8 (CWI509) */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Hampoo"), + DMI_MATCH(DMI_BOARD_NAME, "BYT-PA03C"), + DMI_MATCH(DMI_SYS_VENDOR, "ilife"), + DMI_MATCH(DMI_PRODUCT_NAME, "S806"), + }, + .driver_data = (void *)(BYT_RT5640_IN1_MAP | + BYT_RT5640_JD_SRC_JD2_IN4N | + BYT_RT5640_OVCD_TH_2000UA | + BYT_RT5640_OVCD_SF_0P75 | + BYT_RT5640_MONO_SPEAKER | + BYT_RT5640_DIFF_MIC | + BYT_RT5640_SSP0_AIF1 | + BYT_RT5640_MCLK_EN), + }, { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Circuitco"), -- 2.30.2

1 0

[PATCH AUTOSEL 5.10 17/85] ALSA: bebob: enable to deliver MIDI messages for multiple ports
by Sasha Levin 05 May '21

05 May '21

From: Takashi Sakamoto <o-takashi(a)sakamocchi.jp> [ Upstream commit d2b6f15bc18ac8fbce25398290774c21f5b2cd44 ] Current implementation of bebob driver doesn't correctly handle the case that the device has multiple MIDI ports. The cause is the number of MIDI conformant data channels is passed to AM824 data block processing layer. This commit fixes the bug. Signed-off-by: Takashi Sakamoto <o-takashi(a)sakamocchi.jp> Link: https://lore.kernel.org/r/20210321032831.340278-4-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/firewire/bebob/bebob_stream.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/sound/firewire/bebob/bebob_stream.c b/sound/firewire/bebob/bebob_stream.c index bbae04793c50..c18017e0a3d9 100644 --- a/sound/firewire/bebob/bebob_stream.c +++ b/sound/firewire/bebob/bebob_stream.c @@ -517,20 +517,22 @@ int snd_bebob_stream_init_duplex(struct snd_bebob *bebob) static int keep_resources(struct snd_bebob *bebob, struct amdtp_stream *stream, unsigned int rate, unsigned int index) { - struct snd_bebob_stream_formation *formation; + unsigned int pcm_channels; + unsigned int midi_ports; struct cmp_connection *conn; int err; if (stream == &bebob->tx_stream) { - formation = bebob->tx_stream_formations + index; + pcm_channels = bebob->tx_stream_formations[index].pcm; + midi_ports = bebob->midi_input_ports; conn = &bebob->out_conn; } else { - formation = bebob->rx_stream_formations + index; + pcm_channels = bebob->rx_stream_formations[index].pcm; + midi_ports = bebob->midi_output_ports; conn = &bebob->in_conn; } - err = amdtp_am824_set_parameters(stream, rate, formation->pcm, - formation->midi, false); + err = amdtp_am824_set_parameters(stream, rate, pcm_channels, midi_ports, false); if (err < 0) return err; -- 2.30.2

1 0

[PATCH AUTOSEL 5.10 16/85] ALSA: rme9652: don't disable if not enabled
by Sasha Levin 05 May '21

05 May '21

From: Tong Zhang <ztong0001(a)gmail.com> [ Upstream commit f57a741874bb6995089020e97a1dcdf9b165dcbe ] rme9652 wants to disable a not enabled pci device, which makes kernel throw a warning. Make sure the device is enabled before calling disable. [ 1.751595] snd_rme9652 0000:00:03.0: disabling already-disabled device [ 1.751605] WARNING: CPU: 0 PID: 174 at drivers/pci/pci.c:2146 pci_disable_device+0x91/0xb0 [ 1.759968] Call Trace: [ 1.760145] snd_rme9652_card_free+0x76/0xa0 [snd_rme9652] [ 1.760434] release_card_device+0x4b/0x80 [snd] [ 1.760679] device_release+0x3b/0xa0 [ 1.760874] kobject_put+0x94/0x1b0 [ 1.761059] put_device+0x13/0x20 [ 1.761235] snd_card_free+0x61/0x90 [snd] [ 1.761454] snd_rme9652_probe+0x3be/0x700 [snd_rme9652] Suggested-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Tong Zhang <ztong0001(a)gmail.com> Link: https://lore.kernel.org/r/20210321153840.378226-4-ztong0001@gmail.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/pci/rme9652/rme9652.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/pci/rme9652/rme9652.c b/sound/pci/rme9652/rme9652.c index 7ab10028d9fa..8def24673f35 100644 --- a/sound/pci/rme9652/rme9652.c +++ b/sound/pci/rme9652/rme9652.c @@ -1740,7 +1740,8 @@ static int snd_rme9652_free(struct snd_rme9652 *rme9652) if (rme9652->port) pci_release_regions(rme9652->pci); - pci_disable_device(rme9652->pci); + if (pci_is_enabled(rme9652->pci)) + pci_disable_device(rme9652->pci); return 0; } -- 2.30.2

1 0

[PATCH AUTOSEL 5.10 15/85] ALSA: hdspm: don't disable if not enabled
by Sasha Levin 05 May '21

05 May '21

From: Tong Zhang <ztong0001(a)gmail.com> [ Upstream commit 790f5719b85e12e10c41753b864e74249585ed08 ] hdspm wants to disable a not enabled pci device, which makes kernel throw a warning. Make sure the device is enabled before calling disable. [ 1.786391] snd_hdspm 0000:00:03.0: disabling already-disabled device [ 1.786400] WARNING: CPU: 0 PID: 182 at drivers/pci/pci.c:2146 pci_disable_device+0x91/0xb0 [ 1.795181] Call Trace: [ 1.795320] snd_hdspm_card_free+0x58/0xa0 [snd_hdspm] [ 1.795595] release_card_device+0x4b/0x80 [snd] [ 1.795860] device_release+0x3b/0xa0 [ 1.796072] kobject_put+0x94/0x1b0 [ 1.796260] put_device+0x13/0x20 [ 1.796438] snd_card_free+0x61/0x90 [snd] [ 1.796659] snd_hdspm_probe+0x97b/0x1440 [snd_hdspm] Suggested-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Tong Zhang <ztong0001(a)gmail.com> Link: https://lore.kernel.org/r/20210321153840.378226-3-ztong0001@gmail.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/pci/rme9652/hdspm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index 4a1f576dd9cf..51c3c6a08a1c 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -6891,7 +6891,8 @@ static int snd_hdspm_free(struct hdspm * hdspm) if (hdspm->port) pci_release_regions(hdspm->pci); - pci_disable_device(hdspm->pci); + if (pci_is_enabled(hdspm->pci)) + pci_disable_device(hdspm->pci); return 0; } -- 2.30.2

1 0

[PATCH AUTOSEL 5.10 14/85] ALSA: hdsp: don't disable if not enabled
by Sasha Levin 05 May '21

05 May '21

From: Tong Zhang <ztong0001(a)gmail.com> [ Upstream commit 507cdb9adba006a7798c358456426e1aea3d9c4f ] hdsp wants to disable a not enabled pci device, which makes kernel throw a warning. Make sure the device is enabled before calling disable. [ 1.758292] snd_hdsp 0000:00:03.0: disabling already-disabled device [ 1.758327] WARNING: CPU: 0 PID: 180 at drivers/pci/pci.c:2146 pci_disable_device+0x91/0xb0 [ 1.766985] Call Trace: [ 1.767121] snd_hdsp_card_free+0x94/0xf0 [snd_hdsp] [ 1.767388] release_card_device+0x4b/0x80 [snd] [ 1.767639] device_release+0x3b/0xa0 [ 1.767838] kobject_put+0x94/0x1b0 [ 1.768027] put_device+0x13/0x20 [ 1.768207] snd_card_free+0x61/0x90 [snd] [ 1.768430] snd_hdsp_probe+0x524/0x5e0 [snd_hdsp] Suggested-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Tong Zhang <ztong0001(a)gmail.com> Link: https://lore.kernel.org/r/20210321153840.378226-2-ztong0001@gmail.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/pci/rme9652/hdsp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c index cea53a878c36..4aee30db034d 100644 --- a/sound/pci/rme9652/hdsp.c +++ b/sound/pci/rme9652/hdsp.c @@ -5321,7 +5321,8 @@ static int snd_hdsp_free(struct hdsp *hdsp) if (hdsp->port) pci_release_regions(hdsp->pci); - pci_disable_device(hdsp->pci); + if (pci_is_enabled(hdsp->pci)) + pci_disable_device(hdsp->pci); return 0; } -- 2.30.2

1 0

[PATCH AUTOSEL 5.10 10/85] ASoC: rsnd: core: Check convert rate in rsnd_hw_params
by Sasha Levin 05 May '21

05 May '21

From: Mikhail Durnev <mikhail_durnev(a)mentor.com> [ Upstream commit 19c6a63ced5e07e40f3a5255cb1f0fe0d3be7b14 ] snd_pcm_hw_params_set_rate_near can return incorrect sample rate in some cases, e.g. when the backend output rate is set to some value higher than 48000 Hz and the input rate is 8000 Hz. So passing the value returned by snd_pcm_hw_params_set_rate_near to snd_pcm_hw_params will result in "FSO/FSI ratio error" and playing no audio at all while the userland is not properly notified about the issue. If SRC is unable to convert the requested sample rate to the sample rate the backend is using, then the requested sample rate should be adjusted in rsnd_hw_params. The userland will be notified about that change in the returned hw_params structure. Signed-off-by: Mikhail Durnev <mikhail_durnev(a)mentor.com> Link: https://lore.kernel.org/r/1615870055-13954-1-git-send-email-mikhail_durnev@… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sh/rcar/core.c | 69 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 68 insertions(+), 1 deletion(-) diff --git a/sound/soc/sh/rcar/core.c b/sound/soc/sh/rcar/core.c index 6e670b3e92a0..289928d4c0c9 100644 --- a/sound/soc/sh/rcar/core.c +++ b/sound/soc/sh/rcar/core.c @@ -1428,8 +1428,75 @@ static int rsnd_hw_params(struct snd_soc_component *component, } if (io->converted_chan) dev_dbg(dev, "convert channels = %d\n", io->converted_chan); - if (io->converted_rate) + if (io->converted_rate) { + /* + * SRC supports convert rates from params_rate(hw_params)/k_down + * to params_rate(hw_params)*k_up, where k_up is always 6, and + * k_down depends on number of channels and SRC unit. + * So all SRC units can upsample audio up to 6 times regardless + * its number of channels. And all SRC units can downsample + * 2 channel audio up to 6 times too. + */ + int k_up = 6; + int k_down = 6; + int channel; + struct rsnd_mod *src_mod = rsnd_io_to_mod_src(io); + dev_dbg(dev, "convert rate = %d\n", io->converted_rate); + + channel = io->converted_chan ? io->converted_chan : + params_channels(hw_params); + + switch (rsnd_mod_id(src_mod)) { + /* + * SRC0 can downsample 4, 6 and 8 channel audio up to 4 times. + * SRC1, SRC3 and SRC4 can downsample 4 channel audio + * up to 4 times. + * SRC1, SRC3 and SRC4 can downsample 6 and 8 channel audio + * no more than twice. + */ + case 1: + case 3: + case 4: + if (channel > 4) { + k_down = 2; + break; + } + fallthrough; + case 0: + if (channel > 2) + k_down = 4; + break; + + /* Other SRC units do not support more than 2 channels */ + default: + if (channel > 2) + return -EINVAL; + } + + if (params_rate(hw_params) > io->converted_rate * k_down) { + hw_param_interval(hw_params, SNDRV_PCM_HW_PARAM_RATE)->min = + io->converted_rate * k_down; + hw_param_interval(hw_params, SNDRV_PCM_HW_PARAM_RATE)->max = + io->converted_rate * k_down; + hw_params->cmask |= SNDRV_PCM_HW_PARAM_RATE; + } else if (params_rate(hw_params) * k_up < io->converted_rate) { + hw_param_interval(hw_params, SNDRV_PCM_HW_PARAM_RATE)->min = + (io->converted_rate + k_up - 1) / k_up; + hw_param_interval(hw_params, SNDRV_PCM_HW_PARAM_RATE)->max = + (io->converted_rate + k_up - 1) / k_up; + hw_params->cmask |= SNDRV_PCM_HW_PARAM_RATE; + } + + /* + * TBD: Max SRC input and output rates also depend on number + * of channels and SRC unit: + * SRC1, SRC3 and SRC4 do not support more than 128kHz + * for 6 channel and 96kHz for 8 channel audio. + * Perhaps this function should return EINVAL if the input or + * the output rate exceeds the limitation. + */ + } } return rsnd_dai_call(hw_params, io, substream, hw_params); -- 2.30.2

1 0

[PATCH AUTOSEL 5.10 07/85] ASoC: Intel: bytcr_rt5640: Enable jack-detect support on Asus T100TAF
by Sasha Levin 05 May '21

05 May '21

From: Hans de Goede <hdegoede(a)redhat.com> [ Upstream commit b7c7203a1f751348f35fc4bcb157572d303f7573 ] The Asus T100TAF uses the same jack-detect settings as the T100TA, this has been confirmed on actual hardware. Add these settings to the T100TAF quirks to enable jack-detect support on the T100TAF. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Link: https://lore.kernel.org/r/20210312114850.13832-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/boards/bytcr_rt5640.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index d5812e73eb63..2d887406ca85 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -478,6 +478,9 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TAF"), }, .driver_data = (void *)(BYT_RT5640_IN1_MAP | + BYT_RT5640_JD_SRC_JD2_IN4N | + BYT_RT5640_OVCD_TH_2000UA | + BYT_RT5640_OVCD_SF_0P75 | BYT_RT5640_MONO_SPEAKER | BYT_RT5640_DIFF_MIC | BYT_RT5640_SSP0_AIF2 | -- 2.30.2

1 0

[PATCH AUTOSEL 5.11 080/104] ASoC: rt286: Generalize support for ALC3263 codec
by Sasha Levin 05 May '21

05 May '21

From: David Ward <david.ward(a)gatech.edu> [ Upstream commit aa2f9c12821e6a4ba1df4fb34a3dbc6a2a1ee7fe ] The ALC3263 codec on the XPS 13 9343 is also found on the Latitude 13 7350 and Venue 11 Pro 7140. They require the same handling for the combo jack to work with a headset: GPIO pin 6 must be set. The HDA driver always sets this pin on the ALC3263, which it distinguishes by the codec vendor/device ID 0x10ec0288 and PCI subsystem vendor ID 0x1028 (Dell). The ASoC driver does not use PCI, so adapt this check to use DMI to determine if Dell is the system vendor. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=150601 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205961 Signed-off-by: David Ward <david.ward(a)gatech.edu> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Link: https://lore.kernel.org/r/20210418134658.4333-6-david.ward@gatech.edu Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/rt286.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/sound/soc/codecs/rt286.c b/sound/soc/codecs/rt286.c index 5fb9653d9131..8ae2e2eaad3d 100644 --- a/sound/soc/codecs/rt286.c +++ b/sound/soc/codecs/rt286.c @@ -1117,12 +1117,11 @@ static const struct dmi_system_id force_combo_jack_table[] = { { } }; -static const struct dmi_system_id dmi_dell_dino[] = { +static const struct dmi_system_id dmi_dell[] = { { - .ident = "Dell Dino", + .ident = "Dell", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "XPS 13 9343") } }, { } @@ -1133,7 +1132,7 @@ static int rt286_i2c_probe(struct i2c_client *i2c, { struct rt286_platform_data *pdata = dev_get_platdata(&i2c->dev); struct rt286_priv *rt286; - int i, ret, val; + int i, ret, vendor_id; rt286 = devm_kzalloc(&i2c->dev, sizeof(*rt286), GFP_KERNEL); @@ -1149,14 +1148,15 @@ static int rt286_i2c_probe(struct i2c_client *i2c, } ret = regmap_read(rt286->regmap, - RT286_GET_PARAM(AC_NODE_ROOT, AC_PAR_VENDOR_ID), &val); + RT286_GET_PARAM(AC_NODE_ROOT, AC_PAR_VENDOR_ID), &vendor_id); if (ret != 0) { dev_err(&i2c->dev, "I2C error %d\n", ret); return ret; } - if (val != RT286_VENDOR_ID && val != RT288_VENDOR_ID) { + if (vendor_id != RT286_VENDOR_ID && vendor_id != RT288_VENDOR_ID) { dev_err(&i2c->dev, - "Device with ID register %#x is not rt286\n", val); + "Device with ID register %#x is not rt286\n", + vendor_id); return -ENODEV; } @@ -1180,8 +1180,8 @@ static int rt286_i2c_probe(struct i2c_client *i2c, if (pdata) rt286->pdata = *pdata; - if (dmi_check_system(force_combo_jack_table) || - dmi_check_system(dmi_dell_dino)) + if ((vendor_id == RT288_VENDOR_ID && dmi_check_system(dmi_dell)) || + dmi_check_system(force_combo_jack_table)) rt286->pdata.cbj_en = true; regmap_write(rt286->regmap, RT286_SET_AUDIO_POWER, AC_PWRST_D3); @@ -1220,7 +1220,7 @@ static int rt286_i2c_probe(struct i2c_client *i2c, regmap_update_bits(rt286->regmap, RT286_DEPOP_CTRL3, 0xf777, 0x4737); regmap_update_bits(rt286->regmap, RT286_DEPOP_CTRL4, 0x00ff, 0x003f); - if (dmi_check_system(dmi_dell_dino)) { + if (vendor_id == RT288_VENDOR_ID && dmi_check_system(dmi_dell)) { regmap_update_bits(rt286->regmap, RT286_SET_GPIO_MASK, 0x40, 0x40); regmap_update_bits(rt286->regmap, -- 2.30.2

1 0