April 2021 - Alsa-devel - mailman.alsa-project.org

[PATCH v2 2/3] ASoC: rt715: remove kcontrols which no longer be used
by Jack Yu 16 Apr '21

16 Apr '21

Using new kcontrols "Capture Switch" and "Capture Volume" instead, remove kcontrols which no longer be used. Signed-off-by: Jack Yu <jack.yu(a)realtek.com> --- sound/soc/codecs/rt715.c | 103 +++++++++++++-------------------------- sound/soc/codecs/rt715.h | 1 + 2 files changed, 36 insertions(+), 68 deletions(-) diff --git a/sound/soc/codecs/rt715.c b/sound/soc/codecs/rt715.c index 3cb8ab452bf1..b33eabb9f740 100644 --- a/sound/soc/codecs/rt715.c +++ b/sound/soc/codecs/rt715.c @@ -81,12 +81,20 @@ static int rt715_set_amp_gain_put(struct snd_kcontrol *kcontrol, (struct soc_mixer_control *)kcontrol->private_value; struct rt715_priv *rt715 = snd_soc_component_get_drvdata(component); unsigned int addr_h, addr_l, val_h, val_ll, val_lr; - unsigned int read_ll, read_rl; - int i; + unsigned int read_ll, read_rl, i; + unsigned int k_vol_changed = 0; + + for (i = 0; i < 2; i++) { + if (ucontrol->value.integer.value[i] != rt715->kctl_2ch_vol_ori[i]) { + k_vol_changed = 1; + break; + } + } /* Can't use update bit function, so read the original value first */ addr_h = mc->reg; addr_l = mc->rreg; + if (mc->shift == RT715_DIR_OUT_SFT) /* output */ val_h = 0x80; else /* input */ @@ -94,41 +102,27 @@ static int rt715_set_amp_gain_put(struct snd_kcontrol *kcontrol, rt715_get_gain(rt715, addr_h, addr_l, val_h, &read_rl, &read_ll); + if (dapm->bias_level <= SND_SOC_BIAS_STANDBY) + regmap_write(rt715->regmap, + RT715_SET_AUDIO_POWER_STATE, AC_PWRST_D0); + /* L Channel */ - if (mc->invert) { - /* for mute */ - val_ll = (mc->max - ucontrol->value.integer.value[0]) << 7; - /* keep gain */ - read_ll = read_ll & 0x7f; - val_ll |= read_ll; - } else { - /* for gain */ - val_ll = ((ucontrol->value.integer.value[0]) & 0x7f); - if (val_ll > mc->max) - val_ll = mc->max; - /* keep mute status */ - read_ll = read_ll & 0x80; - val_ll |= read_ll; - } + rt715->kctl_2ch_vol_ori[0] = ucontrol->value.integer.value[0]; + /* for gain */ + val_ll = ((ucontrol->value.integer.value[0]) & 0x7f); + if (val_ll > mc->max) + val_ll = mc->max; + /* keep mute status */ + val_ll |= read_ll & 0x80; /* R Channel */ - if (mc->invert) { - regmap_write(rt715->regmap, - RT715_SET_AUDIO_POWER_STATE, AC_PWRST_D0); - /* for mute */ - val_lr = (mc->max - ucontrol->value.integer.value[1]) << 7; - /* keep gain */ - read_rl = read_rl & 0x7f; - val_lr |= read_rl; - } else { - /* for gain */ - val_lr = ((ucontrol->value.integer.value[1]) & 0x7f); - if (val_lr > mc->max) - val_lr = mc->max; - /* keep mute status */ - read_rl = read_rl & 0x80; - val_lr |= read_rl; - } + rt715->kctl_2ch_vol_ori[1] = ucontrol->value.integer.value[1]; + /* for gain */ + val_lr = ((ucontrol->value.integer.value[1]) & 0x7f); + if (val_lr > mc->max) + val_lr = mc->max; + /* keep mute status */ + val_lr |= read_rl & 0x80; for (i = 0; i < 3; i++) { /* retry 3 times at most */ @@ -136,18 +130,18 @@ static int rt715_set_amp_gain_put(struct snd_kcontrol *kcontrol, /* Set both L/R channels at the same time */ val_h = (1 << mc->shift) | (3 << 4); regmap_write(rt715->regmap, addr_h, - (val_h << 8 | val_ll)); + (val_h << 8) | val_ll); regmap_write(rt715->regmap, addr_l, - (val_h << 8 | val_ll)); + (val_h << 8) | val_ll); } else { /* Lch*/ val_h = (1 << mc->shift) | (1 << 5); regmap_write(rt715->regmap, addr_h, - (val_h << 8 | val_ll)); + (val_h << 8) | val_ll); /* Rch */ val_h = (1 << mc->shift) | (1 << 4); regmap_write(rt715->regmap, addr_l, - (val_h << 8 | val_lr)); + (val_h << 8) | val_lr); } /* check result */ if (mc->shift == RT715_DIR_OUT_SFT) /* output */ @@ -156,15 +150,16 @@ static int rt715_set_amp_gain_put(struct snd_kcontrol *kcontrol, val_h = 0x0; rt715_get_gain(rt715, addr_h, addr_l, val_h, - &read_rl, &read_ll); + &read_rl, &read_ll); if (read_rl == val_lr && read_ll == val_ll) break; } + /* D0:power on state, D3: power saving mode */ if (dapm->bias_level <= SND_SOC_BIAS_STANDBY) regmap_write(rt715->regmap, RT715_SET_AUDIO_POWER_STATE, AC_PWRST_D3); - return 0; + return k_vol_changed; } static int rt715_set_amp_gain_get(struct snd_kcontrol *kcontrol, @@ -466,37 +461,9 @@ static int rt715_vol_info(struct snd_kcontrol *kcontrol, static const struct snd_kcontrol_new rt715_snd_controls[] = { /* Capture switch */ - SOC_DOUBLE_R_EXT("ADC 07 Capture Switch", RT715_SET_GAIN_MIC_ADC_H, - RT715_SET_GAIN_MIC_ADC_L, RT715_DIR_IN_SFT, 1, 1, - rt715_set_amp_gain_get, rt715_set_amp_gain_put), - SOC_DOUBLE_R_EXT("ADC 08 Capture Switch", RT715_SET_GAIN_LINE_ADC_H, - RT715_SET_GAIN_LINE_ADC_L, RT715_DIR_IN_SFT, 1, 1, - rt715_set_amp_gain_get, rt715_set_amp_gain_put), - SOC_DOUBLE_R_EXT("ADC 09 Capture Switch", RT715_SET_GAIN_MIX_ADC_H, - RT715_SET_GAIN_MIX_ADC_L, RT715_DIR_IN_SFT, 1, 1, - rt715_set_amp_gain_get, rt715_set_amp_gain_put), - SOC_DOUBLE_R_EXT("ADC 27 Capture Switch", RT715_SET_GAIN_MIX_ADC2_H, - RT715_SET_GAIN_MIX_ADC2_L, RT715_DIR_IN_SFT, 1, 1, - rt715_set_amp_gain_get, rt715_set_amp_gain_put), RT715_MAIN_SWITCH_EXT("Capture Switch", rt715_set_main_switch_get, rt715_set_main_switch_put), /* Volume Control */ - SOC_DOUBLE_R_EXT_TLV("ADC 07 Capture Volume", RT715_SET_GAIN_MIC_ADC_H, - RT715_SET_GAIN_MIC_ADC_L, RT715_DIR_IN_SFT, 0x3f, 0, - rt715_set_amp_gain_get, rt715_set_amp_gain_put, - in_vol_tlv), - SOC_DOUBLE_R_EXT_TLV("ADC 08 Capture Volume", RT715_SET_GAIN_LINE_ADC_H, - RT715_SET_GAIN_LINE_ADC_L, RT715_DIR_IN_SFT, 0x3f, 0, - rt715_set_amp_gain_get, rt715_set_amp_gain_put, - in_vol_tlv), - SOC_DOUBLE_R_EXT_TLV("ADC 09 Capture Volume", RT715_SET_GAIN_MIX_ADC_H, - RT715_SET_GAIN_MIX_ADC_L, RT715_DIR_IN_SFT, 0x3f, 0, - rt715_set_amp_gain_get, rt715_set_amp_gain_put, - in_vol_tlv), - SOC_DOUBLE_R_EXT_TLV("ADC 27 Capture Volume", RT715_SET_GAIN_MIX_ADC2_H, - RT715_SET_GAIN_MIX_ADC2_L, RT715_DIR_IN_SFT, 0x3f, 0, - rt715_set_amp_gain_get, rt715_set_amp_gain_put, - in_vol_tlv), RT715_MAIN_VOL_EXT_TLV("Capture Volume", rt715_set_main_vol_get, rt715_set_main_vol_put, in_vol_tlv), /* MIC Boost Control */ diff --git a/sound/soc/codecs/rt715.h b/sound/soc/codecs/rt715.h index 72c320bd35cb..25dba61f1760 100644 --- a/sound/soc/codecs/rt715.h +++ b/sound/soc/codecs/rt715.h @@ -22,6 +22,7 @@ struct rt715_priv { struct sdw_bus_params params; bool hw_init; bool first_hw_init; + unsigned int kctl_2ch_vol_ori[2]; unsigned int kctl_8ch_switch_ori[8]; unsigned int kctl_8ch_vol_ori[8]; }; -- 2.29.0

4 9

[PATCH] Revert "ASoC: mt6359: add ASoC mt6359 ASoC accdet jack document"
by Rob Herring 16 Apr '21

16 Apr '21

This reverts commit e61c589587c772c5f672b22683c3e0b38be20702. The binding document has lots of schema errors and there's been no effort to fix them, so let's remove it. Cc: Argus Lin <argus.lin(a)mediatek.com> Cc: Mark Brown <broonie(a)kernel.org> Cc: Liam Girdwood <lgirdwood(a)gmail.com> Cc: Matthias Brugger <matthias.bgg(a)gmail.com> Cc: alsa-devel(a)alsa-project.org Cc: linux-arm-kernel(a)lists.infradead.org Cc: linux-mediatek(a)lists.infradead.org Signed-off-by: Rob Herring <robh(a)kernel.org> --- .../bindings/sound/mt6359-accdet.yaml | 164 ------------------ 1 file changed, 164 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/mt6359-accdet.yaml diff --git a/Documentation/devicetree/bindings/sound/mt6359-accdet.yaml b/Documentation/devicetree/bindings/sound/mt6359-accdet.yaml deleted file mode 100644 index 7fb3e8dfb4c5..000000000000 --- a/Documentation/devicetree/bindings/sound/mt6359-accdet.yaml +++ /dev/null @@ -1,164 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/mt6359-accdet.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Mediatek Technologies Inc. MT6359 ASoC accdet jack driver bindings - -maintainers: - - Chipeng Chang <chipeng.chang(a)mediatek.com> - -description: | - This binding describes the Mediatek Technologies MT6359 ASoC - accdet jack driver. - -properties: - mediatek,accdet-name: - maxItems: 1 - description: named as "mt6359-accdet" jack. - - mediatek,mic-vol: - maxItems: 1 - description: | - accdet micbias1 voltage. - - enum: - - 0x00 # 1.7v - micbias1 volage is 1.7v. - - 0x01 # 1.8v - micbias1 volage is 1.8v. - - 0x02 # 1.9v - micbias1 volage is 1.9v. - - 0x03 # 2.0v - micbias1 volage is 2.0v. - - 0x04 # 2.1v - micbias1 volage is 2.1v. - - 0x05 # 2.5v - micbias1 volage is 2.5v. - - 0x06 # 2.6v - micbias1 volage is 2.6v. - - 0x07 # 2.7v - micbias1 volage is 2.7v. - - 0x08 # 2.8v - micbias1 volage is 2.8v. - - 0x09 # 2.85v - micbias1 volage is 2.85v. - - mediatek,mic-mode: - maxItems: 1 - description: | - value as 1, 2, 6 to indicate ACC/DCC mode. default is DCC mode 2. - - enum: - - 0x01 # ACC - ACC mode. - - 0x02 # DCC - low cost without in bias. - - 0x06 # DCC - low cost with in bias. - - mediatek,pwm-deb-setting: - maxItems: 15 - description: | - headset-mode-setting : Indicates customized pwm, debounce setting - accdet pwm_width, pwm_thresh, fall_delay, rise_delay - debounce0, debounce1, debounce3, debounce4 - eint pwm_width, eint pwm_thresh - eint deb(debounce0, debounce1, debounce2, debounce3), inv_debounce. - - mediatek,eint-use-ap: - maxItems: 1 - description: | - indicates to use ap gpio. - - enum: - - 0x00 # MT6359 eint detection mode. - - 0x01 # SoC GPIO detection mode. - - mediatek,eint-detect-mode: - maxItems: 1 - description: | - indicates to use ap gpio. - - enum: - - 0x00 # detection mode with higher detection power. - - 0x01 # detection mode with lower detection power. - - 0x02 # detection mode with sw moisture detection mode. - - 0x03 # detection mode with hw moisture detection mode1. - - 0x04 # detection mode with hw moisture detection mode2. - - mediatek,eint-num: - maxItems: 1 - description: | - incicates pmic eint usage. - - enum: - - 0x0 # PMIC_EINT0 - use pmic eint0 to trigger plug interrupt. - - 0x1 # PMIC_EINT1 - use pmic eint1 to trigger plug interrupt. - - 0x2 # PMIC_BI_EINT - use pmic eint0/1 to trigger plug interrupt. - - mediatek,eint-trig-mode: - maxItems: 1 - description: | - incicates pmic eint trigger mode. - - enum: - - 0x0 # PMIC_GPIO - use pmic gpio to detect plug status. - - 0x1 # PMIC_INVERTER - use pmic inverter to detect plug status. - - mediatek,eint-use-ext-res: - maxItems: 1 - description: | - select HP_EINT pull up resistance, default 0 use internal resistance. - - enum: - - 0x0 # use internal resistor. - - 0x1 # use external resistor. - - mediatek,eint-comp-vth: - maxItems: 1 - description: | - indicates comparator detection voltage. - - enum: - - 0x00 # 2.8v. - - 0x01 # 2.4v. - - 0x02 # 2.0v. - - 0x03 # 0.7v. - - mediatek,key-mode: - maxItems: 1 - description: | - incicates key mode type. - - enum: - - 0x0 # THREE_KEY - support 3-key key mode. - - 0x1 # FOUR_KEY - support 4-key key mode. - - 0x2 # TRI_KEY_CDD - support 3-key google CDD key mode. - - mediatek,three-key-thr: - maxItems: 4 - description: | - 3 key device detection threshold: 0--MD_MAX--UP_MAX--DW_MAX. - - mediatek,tri-key-cdd-thr: - maxItems: 4 - description: | - 3 key CDD device detection threshold: 0--MD_MAX--UP_MAX--DW_MAX. - - mediatek,four-key-thr: - maxItems: 4 - description: | - 4 key device detection threshold: 0--MD_MAX--VOICE_MAX--UP_MAX--DW_MAX. - -additionalProperties: false - -examples: - - | - accdet: accdet { - mediatek,accdet-name = "mt6359-accdet"; - mediatek,mic-vol = <8>; - mediatek,mic-mode = <2>; - mediatek,pwm-deb-setting = <0x500 0x500 1 0x1f0 - 0x800 0x800 0x20 0x44 - 0x4 0x1 - 0x5 0x3 0x3 0x5 0xe>; - mediatek,eint-use-ap = <0>; - mediatek,eint-detect-mode = <4>; - mediatek,eint-num = <0>; - mediatek,eint-trig-mode = <1>; - mediatek,eint-use-ext-res = <0>; - mediatek,eint-comp-vth = <2>; - mediatek,key-mode = <0>; - mediatek,three-key-thr = <0 80 220 400>; - status = "okay"; - }; -... -- 2.27.0

2 1

[PATCH] ALSA: hda/realtek: Add quirk for Lenovo Ideapad S740
by Takashi Iwai 16 Apr '21

16 Apr '21

Lenovo Ideapad S740 requires quite a few COEF setups to make its speakers working. The verb table was provided from Ryan Prescott as the result of investigation via qemu: https://github.com/ryanprescott/realtek-verb-tools/wiki/How-to-sniff-verbs-… BugLink: https://github.com/thesofproject/linux/issues/2748 Tested-by: Ryan Prescott <ryan(a)cousinscomputers.net> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/pci/hda/ideapad_s740_helper.c | 492 ++++++++++++++++++++++++++++ sound/pci/hda/patch_realtek.c | 11 + 2 files changed, 503 insertions(+) create mode 100644 sound/pci/hda/ideapad_s740_helper.c diff --git a/sound/pci/hda/ideapad_s740_helper.c b/sound/pci/hda/ideapad_s740_helper.c new file mode 100644 index 000000000000..564b9086e52d --- /dev/null +++ b/sound/pci/hda/ideapad_s740_helper.c @@ -0,0 +1,492 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Fixes for Lenovo Ideapad S740, to be included from codec driver */ + +static const struct hda_verb alc285_ideapad_s740_coefs[] = { +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x10 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0320 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x24 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0041 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x24 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0041 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x007f }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x007f }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x003c }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0011 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x003c }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0011 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x000c }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x001a }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x000c }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x001a }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x000f }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0042 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x000f }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0042 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0010 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0040 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0010 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0040 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0003 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0009 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0003 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0009 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x001c }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x004c }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x001c }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x004c }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x001d }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x004e }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x001d }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x004e }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x001b }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x001b }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0019 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0025 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0019 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0025 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0018 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0037 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0018 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0037 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x001a }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0040 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x001a }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0040 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0016 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0076 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0016 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0076 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0017 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0010 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0017 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0010 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0015 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0015 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0015 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0015 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0007 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0086 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0007 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0086 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0002 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0002 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0002 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0002 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x24 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0042 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x24 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0042 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x007f }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x007f }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x003c }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0011 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x003c }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0011 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x000c }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x002a }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x000c }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x002a }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x000f }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0046 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x000f }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0046 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0010 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0044 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0010 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0044 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0003 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0009 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0003 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0009 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x001c }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x004c }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x001c }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x004c }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x001b }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x001b }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0019 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0025 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0019 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0025 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0018 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0037 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0018 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0037 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x001a }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0040 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x001a }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0040 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0016 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0076 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0016 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0076 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0017 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0010 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0017 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0010 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0015 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0015 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0015 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0015 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0007 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0086 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0007 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0086 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0002 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0002 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 }, +{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0002 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 }, +{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, +{} +}; + +static void alc285_fixup_ideapad_s740_coef(struct hda_codec *codec, + const struct hda_fixup *fix, + int action) +{ + switch (action) { + case HDA_FIXUP_ACT_PRE_PROBE: + snd_hda_add_verbs(codec, alc285_ideapad_s740_coefs); + break; + } +} diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 50437ec1b9af..1ef40f3ca259 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6239,6 +6239,9 @@ static void alc_fixup_thinkpad_acpi(struct hda_codec *codec, /* for alc295_fixup_hp_top_speakers */ #include "hp_x360_helper.c" +/* for alc285_fixup_ideapad_s740_coef() */ +#include "ideapad_s740_helper.c" + enum { ALC269_FIXUP_GPIO2, ALC269_FIXUP_SONY_VAIO, @@ -6436,6 +6439,7 @@ enum { ALC282_FIXUP_ACER_DISABLE_LINEOUT, ALC255_FIXUP_ACER_LIMIT_INT_MIC_BOOST, ALC256_FIXUP_ACER_HEADSET_MIC, + ALC285_FIXUP_IDEAPAD_S740_COEF, }; static const struct hda_fixup alc269_fixups[] = { @@ -7920,6 +7924,12 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC }, + [ALC285_FIXUP_IDEAPAD_S740_COEF] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc285_fixup_ideapad_s740_coef, + .chained = true, + .chain_id = ALC269_FIXUP_THINKPAD_ACPI, + }, }; static const struct snd_pci_quirk alc269_fixup_tbl[] = { @@ -8263,6 +8273,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x3176, "ThinkCentre Station", ALC283_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x17aa, 0x3178, "ThinkCentre Station", ALC283_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x17aa, 0x3818, "Lenovo C940", ALC298_FIXUP_LENOVO_SPK_VOLUME), + SND_PCI_QUIRK(0x17aa, 0x3827, "Ideapad S740", ALC285_FIXUP_IDEAPAD_S740_COEF), SND_PCI_QUIRK(0x17aa, 0x3902, "Lenovo E50-80", ALC269_FIXUP_DMIC_THINKPAD_ACPI), SND_PCI_QUIRK(0x17aa, 0x3977, "IdeaPad S210", ALC283_FIXUP_INT_MIC), SND_PCI_QUIRK(0x17aa, 0x3978, "Lenovo B50-70", ALC269_FIXUP_DMIC_THINKPAD_ACPI), -- 2.26.2

4 7

[PATCH] ASoC: ak4458: check reset control status
by Shengjiu Wang 16 Apr '21

16 Apr '21

From: Viorel Suman <viorel.suman(a)nxp.com> check the return value of ak4458_rstn_control. Signed-off-by: Viorel Suman <viorel.suman(a)nxp.com> Signed-off-by: Shengjiu Wang <shengjiu.wang(a)nxp.com> --- sound/soc/codecs/ak4458.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/ak4458.c b/sound/soc/codecs/ak4458.c index 85a1d00894a9..0a94973889a1 100644 --- a/sound/soc/codecs/ak4458.c +++ b/sound/soc/codecs/ak4458.c @@ -419,8 +419,13 @@ static int ak4458_hw_params(struct snd_pcm_substream *substream, snd_soc_component_update_bits(component, AK4458_00_CONTROL1, AK4458_DIF_MASK, format); - ak4458_rstn_control(component, 0); - ak4458_rstn_control(component, 1); + ret = ak4458_rstn_control(component, 0); + if (ret) + return ret; + + ret = ak4458_rstn_control(component, 1); + if (ret) + return ret; return 0; } @@ -429,6 +434,7 @@ static int ak4458_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) { struct snd_soc_component *component = dai->component; struct ak4458_priv *ak4458 = snd_soc_component_get_drvdata(component); + int ret; switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { case SND_SOC_DAIFMT_CBS_CFS: /* Slave Mode */ @@ -461,8 +467,13 @@ static int ak4458_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) ak4458->fmt == SND_SOC_DAIFMT_PDM ? AK4458_DP_MASK : 0); - ak4458_rstn_control(component, 0); - ak4458_rstn_control(component, 1); + ret = ak4458_rstn_control(component, 0); + if (ret) + return ret; + + ret = ak4458_rstn_control(component, 1); + if (ret) + return ret; return 0; } -- 2.27.0

2 2

Add UCM support for SDM845 based Lenovo yoga c360
by GitHub pull_request - opened 16 Apr '21

16 Apr '21

alsa-project/alsa-ucm-conf pull request #88 was opened from Srinivas-Kandagatla: One of the Lenovo YOGA C360 variant is based off Qualcomm SDM845 SoC. This PR adds support to On Board Speakers and Headset. This PR also has a small change to the codec Headphone sequences to be inline with other Sequences. thanks, srini Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/88 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/88.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Re: Implicit feedback on BOSS GT-1, the saga continues...
by Geraldo Nascimento 16 Apr '21

16 Apr '21

> > Mike, I just realize I missed reply-to-all once again. In case you were wondering, I was looking for a sync_ep event right in the start of the loading of snd-usb-audio. It happens inside pcm.c. If you see one of those specifically let me know. With my Pioneer device, the DDJ-SR2, snd-usb-audio recognized the device's implicit feedback EP as sync_ep and that prevented JACK from starting. Em Qua, 7 de abr de 2021 23:47, Mike Oliphant <oliphant(a)nostatic.org> > escreveu: > >> Hi Geraldo - I had the same thought and I have tried enabling playback >> feedback while turning off capture feedback without my endpoint patch. It >> doesn't work - at least not on the GT-1. Playback/capture fails to start. >> > > Would you mind sharing the dyndbg logs for the failure case from the point > you connect the device, and trying to start JACK? > > Sometimes failures elucidate more than success cases. > > >> Speaking of testing, if you (or anyone else following this discussion) >> have one of these Roland/BOSS devices, it would be great if you could try >> testing with playback feedback enabled and my endpoint.c workaround. >> > > I don't have the hardware, but I'm sure it works. The problem is that > endpoint.c code really shouldn't be disabled unless all the other options > fail, and even then, I'm not so sure the maintainers will be so willing to > disable it. So let's keep some other options on the table by debugging a > little further. > > Thank you, > Geraldo > > >> Mike >> >> On Wed, Apr 7, 2021 at 7:21 PM Geraldo Nascimento < >> geraldogabriel(a)gmail.com> wrote: >> >>> Thanks, Mike, one thing I can tell you right off the bat is that if you >>> turn implicit feedback sync on for both endpoints at the same time like you >>> mentioned, without your workaround inside endpoint.c, they most likely will >>> stall because they would both be waiting for each other to start. >>> >>> Have you tried engaging the generic implicit feedback sync just for the >>> playback, thereby commenting out the capture implicit feedback entries, and >>> re-enabling snd_usb_endpoint_implicit_feedback_sink(ep) inside endpoint.c? >>> Does playback still fail to start? >>> >>> If you choose to perform this simple test please share with us the >>> test's dyndbg logs right from the moment you turn on the device, not just >>> after you start jackd. >>> >>> Sorry for the endless do-this, do-that. Such is the pace of teledebugging >>> >>> >>> Em Qua, 7 de abr de 2021 21:38, Mike Oliphant <oliphant(a)nostatic.org> >>> escreveu: >>> >>>> Geraldo - here is the dmesg output when starting up jackd for >>>> capture/playback: >>>> >>>> With my patch: >>>> >>>> [ 136.734081] usb 3-1.2: Open EP 0x8e, iface=2:1, idx=0 >>>> [ 136.734088] usb 3-1.2: channels=2, rate=44100, format=S32_LE, >>>> period_bytes=256, periods=2, implicit_fb=0 >>>> [ 136.734092] usb 3-1.2: Setting usb interface 2:0 for EP 0x8e >>>> [ 136.734233] usb 3-1.2: Setting usb interface 2:1 for EP 0x8e >>>> [ 136.734381] usb 3-1.2: 2:1 Set sample rate 44100, clock 0 >>>> [ 136.734388] usb 3-1.2: Setting params for data EP 0x8e, pipe 0x70480 >>>> [ 136.734394] usb 3-1.2: Set up 12 URBS, ret=0 >>>> [ 136.734466] usb 3-1.2: Open EP 0xd, iface=1:1, idx=0 >>>> [ 136.734468] usb 3-1.2: channels=2, rate=44100, format=S32_LE, >>>> period_bytes=256, periods=2, implicit_fb=1 >>>> [ 136.734471] usb 3-1.2: Reopened EP 0x8e (count 1) >>>> [ 136.734473] usb 3-1.2: Setting usb interface 1:0 for EP 0xd >>>> [ 136.734605] usb 3-1.2: Setting usb interface 1:1 for EP 0xd >>>> [ 136.734762] usb 3-1.2: 1:1 Set sample rate 44100, clock 0 >>>> [ 136.734774] usb 3-1.2: Setting params for data EP 0xd, pipe 0x68400 >>>> [ 136.734781] usb 3-1.2: Set up 12 URBS, ret=0 >>>> [ 136.734830] usb 3-1.2: Starting data EP 0xd (running 0) >>>> [ 136.734873] usb 3-1.2: 12 URBs submitted for EP 0xd >>>> [ 136.734876] usb 3-1.2: Starting data EP 0x8e (running 0) >>>> [ 136.734906] usb 3-1.2: 12 URBs submitted for EP 0x8e >>>> [ 136.740627] usb 3-1.2: Starting data EP 0x8e (running 1) >>>> [ 136.740634] usb 3-1.2: 2:1 Start Capture PCM >>>> [ 136.740635] usb 3-1.2: 1:1 Start Playback PCM >>>> >>>> >>>> With the unpatched kernel: >>>> >>>> [ 344.813203] usb 3-1.2: Open EP 0x8e, iface=2:1, idx=0 >>>> [ 344.813210] usb 3-1.2: channels=2, rate=44100, format=S32_LE, >>>> period_bytes=256, periods=2, implicit_fb=1 >>>> [ 344.813213] usb 3-1.2: Open EP 0xd, iface=1:1, idx=0 >>>> [ 344.813215] usb 3-1.2: channels=2, rate=44100, format=S32_LE, >>>> period_bytes=256, periods=2, implicit_fb=0 >>>> [ 344.813217] usb 3-1.2: Setting usb interface 2:0 for EP 0x8e >>>> [ 344.813367] usb 3-1.2: Setting usb interface 2:1 for EP 0x8e >>>> [ 344.813494] usb 3-1.2: 2:1 Set sample rate 44100, clock 0 >>>> [ 344.813503] usb 3-1.2: Setting params for data EP 0x8e, pipe 0x70580 >>>> [ 344.813509] usb 3-1.2: Set up 12 URBS, ret=0 >>>> [ 344.813513] usb 3-1.2: Setting usb interface 1:0 for EP 0xd >>>> [ 344.813587] usb 3-1.2: Setting usb interface 1:1 for EP 0xd >>>> [ 344.813758] usb 3-1.2: 1:1 Set sample rate 44100, clock 0 >>>> [ 344.813765] usb 3-1.2: Setting params for data EP 0xd, pipe 0x68500 >>>> [ 344.813770] usb 3-1.2: Set up 2 URBS, ret=0 >>>> [ 344.813858] usb 3-1.2: Reopened EP 0xd (count 1) >>>> [ 344.813883] usb 3-1.2: Starting data EP 0xd (running 0) >>>> [ 344.813899] usb 3-1.2: 2 URBs submitted for EP 0xd >>>> [ 344.819499] usb 3-1.2: Starting data EP 0x8e (running 0) >>>> [ 344.819532] usb 3-1.2: 12 URBs submitted for EP 0x8e >>>> [ 344.819535] usb 3-1.2: Starting data EP 0xd (running 1) >>>> [ 344.819538] usb 3-1.2: 2:1 Start Capture PCM >>>> [ 344.819540] usb 3-1.2: 1:1 Start Playback PCM >>>> [ 344.820663] usb 3-1.2: Stopping data EP 0xd (running 2) >>>> [ 344.820688] usb 3-1.2: Stopping data EP 0x8e (running 1) >>>> [ 344.820693] usb 3-1.2: 2:1 Stop Capture PCM >>>> [ 344.820695] usb 3-1.2: Stopping data EP 0xd (running 1) >>>> [ 344.820697] usb 3-1.2: 1:1 Stop Playback PCM >>>> [ 344.833799] usb 3-1.2: Starting data EP 0xd (running 0) >>>> [ 344.833852] usb 3-1.2: 2 URBs submitted for EP 0xd >>>> [ 344.833867] usb 3-1.2: Starting data EP 0x8e (running 0) >>>> [ 344.833888] usb 3-1.2: 12 URBs submitted for EP 0x8e >>>> [ 344.833890] usb 3-1.2: Starting data EP 0xd (running 1) >>>> [ 344.833891] usb 3-1.2: 2:1 Start Capture PCM >>>> [ 344.833893] usb 3-1.2: 1:1 Start Playback PCM >>>> >>>> On Wed, Apr 7, 2021 at 1:30 PM Geraldo Nascimento < >>>> geraldogabriel(a)gmail.com> wrote: >>>> >>>>> Em Qua, 7 de abr de 2021 17:16, Mike Oliphant <oliphant(a)nostatic.org> >>>>> escreveu: >>>>> >>>>>> Hi Geraldo - I don't have that patch applied, but it shouldn't make >>>>>> any behavioral difference - it just seems to be simplifying the code. >>>>>> >>>>> >>>>> Point taken. >>>>> >>>>> >>>>>> The issue is that the BOSS GT-1 *does* need implicit feedback on >>>>>> playback to avoid clock timing issues, and the current behavior is >>>>>> disabling that feedback. >>>>>> >>>>> >>>>> Mike, would you mind posting some dyndbg logs for both the stock >>>>> behaviour and your endpoint.c/generic quirk modified behaviour? >>>>> >>>>> Just add snd_usb_audio.dyndbg=+p to your kernel options and please >>>>> share the logs. >>>>> >>>>> >>>>>> Mike >>>>>> >>>>>> On Wed, Apr 7, 2021 at 1:04 PM Geraldo Nascimento < >>>>>> geraldogabriel(a)gmail.com> wrote: >>>>>> >>>>>>> Hey Mike, did you catch the latest patch by Takashi Iwai for capture >>>>>>> quirky devices? >>>>>>> >>>>>>> You can find it here: >>>>>>> https://patchwork.kernel.org/project/alsa-devel/patch/20210406113837.32041-… >>>>>>> >>>>>>> Em Qua, 7 de abr de 2021 16:55, Mike Oliphant <oliphant(a)nostatic.org> >>>>>>> escreveu: >>>>>>> >>>>>>>> I had thought that the recent implicit feedback changes were fully >>>>>>>> working >>>>>>>> on the BOSS GT-1, but it turns out that I just hadn't tested well >>>>>>>> enough. >>>>>>>> >>>>>>>> Audio playback and capture works, but with periodic dropouts. I get >>>>>>>> the >>>>>>>> exact same behavior as I did with the quirk to completely disable >>>>>>>> implicit >>>>>>>> feedback. Without the implicit feedback, you get dropouts from >>>>>>>> clock drift >>>>>>>> - how bad probably varies from card to card. On mine it is every >>>>>>>> second or >>>>>>>> so. >>>>>>>> >>>>>>>> If I switch playback feedback for the GT-1 to generic by doing >>>>>>>> "IMPLICIT_FB_GENERIC_DEV(0x0582, 0x01d6)", I get the previous old >>>>>>>> behavior, >>>>>>>> which is that playback completely fails to start. >>>>>>>> >>>>>>>> With generic playback feedback, and using my previous patch to >>>>>>>> endpoint.c >>>>>>>> to avoid playback waiting on capture mentioned here: >>>>>>>> >>>>>>>> >>>>>>>> https://mailman.alsa-project.org/pipermail/alsa-devel/2020-January/161951.h… >>>>>>>> >>>>>>>> playback and capture work perfectly for me. >>>>>>>> >>>>>>>

4 34

[PATCH 0/4] ASoC: soc-pcm: ignore dummy-DAI at soc_pcm_params_symmetry()
by Kuninori Morimoto 16 Apr '21

16 Apr '21

Hi Mark I noticed if we have... 1) Sound Card used DPCM 2) It exchanges rate to 48kHz by using .be_hw_params_fixup() 3) Codec had symmetric_rate = 1 We will get below error. I didn't confirm, but maybe same things happen if it exchanged channels/sample_bits. # aplay 44100.wav # aplay 44100.wav => [kernel] be.ak4613-hifi: ASoC: unmatched rate symmetry: snd-soc-dummy-dai:44100 - soc_pcm_params_symmetry:48000 [kernel] be.ak4613-hifi: ASoC: hw_params BE failed -22 [kernel] fe.rsnd-dai.0: ASoC: hw_params BE failed -22 aplay: set_params:1407: Unable to install hw params: ACCESS: RW_INTERLEAVED FORMAT: S16_LE SUBFORMAT: STD SAMPLE_BITS: 16 FRAME_BITS: 32 CHANNELS: 2 RATE: 44100 PERIOD_TIME: (23219 23220) PERIOD_SIZE: 1024 PERIOD_BYTES: 4096 PERIODS: 4 BUFFER_TIME: (92879 92880) BUFFER_SIZE: 4096 BUFFER_BYTES: 16384 TICK_TIME: 0 This patch-set solves this issue. patch 1) - 3) are just cleanup patches. 4) is fot this issue. Link: https://lore.kernel.org/r/87a6q0z4xt.wl-kuninori.morimoto.gx@renesas.com Kuninori Morimoto (4): ASoC: soc-pcm: don't use "name" on __soc_pcm_params_symmetry() macro ASoC: soc-pcm: indicate DAI name if soc_pcm_params_symmetry() failed ASoC: soc-utils: add snd_soc_component_is_dummy() ASoC: soc-pcm: ignore dummy-DAI at soc_pcm_params_symmetry() include/sound/soc-component.h | 1 + sound/soc/soc-core.c | 2 +- sound/soc/soc-pcm.c | 14 ++++++++------ sound/soc/soc-utils.c | 6 ++++++ 4 files changed, 16 insertions(+), 7 deletions(-) -- 2.25.1

2 5

[RESEND PATCH v2] ASoC: core: Don't set platform name when of_node is set
by Daniel Baluta 16 Apr '21

16 Apr '21

From: Daniel Baluta <daniel.baluta(a)nxp.com> A DAI link has 3 components: * CPU * platform * codec(s) A component is specified via: * name * of_node * dai_name In order to avoid confusion when building a sound card we disallow matching by both name and of_node (1). soc_check_tplg_fes allows overriding certain BE links by overriding BE link name. This doesn't work well if BE link was specified via DT, because we end up with a link with both name and of_node specified which is conflicting with (1). In order to fix this we need to: * override of_node if component was specified via DT * override name, otherwise. Signed-off-by: Daniel Baluta <daniel.baluta(a)nxp.com> --- sound/soc/soc-core.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 522bae73640a..7a1c011a7fe0 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1648,7 +1648,11 @@ static void soc_check_tplg_fes(struct snd_soc_card *card) dev_err(card->dev, "init platform error"); continue; } - dai_link->platforms->name = component->name; + + if (component->dev->of_node) + dai_link->platforms->of_node = component->dev->of_node; + else + dai_link->platforms->name = component->name; /* convert non BE into BE */ if (!dai_link->no_pcm) { -- 2.27.0

2 1

[PATCH v2] ALSA: hda/hdmi: fix race in handling acomp ELD notification at resume
by Kai Vehmanen 16 Apr '21

16 Apr '21

When snd-hda-codec-hdmi is used with ASoC HDA controller like SOF (acomp used for ELD notifications), display connection change done during suspend, can be lost due to following sequence of events: 1. system in S3 suspend 2. DP/HDMI receiver connected 3. system resumed 4. HDA controller resumed, but card->deferred_resume_work not complete 5. acomp eld_notify callback 6. eld_notify ignored as power state is not CTL_POWER_D0 7. HDA resume deferred work completed, power state set to CTL_POWER_D0 This results in losing the notification, and the jack state reported to user-space is not correct. The check on step 6 was added in commit 8ae743e82f0b ("ALSA: hda - Skip ELD notification during system suspend"). It would seem with the deferred resume logic in ASoC core, this check is not safe. Fix the issue by modifying the check to use "dev.power.power_state.event" instead of ALSA specific card power state variable. BugLink: https://github.com/thesofproject/linux/issues/2825 Suggested-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> --- sound/pci/hda/patch_hdmi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) Changes for V2: - use codec->core.dev.power.power_state.event instead of card state - verified on multiple systems and confirmed that checking for PM_EVENT_ON is not sufficient -- when resuming from S3, state can be PM_EVENT_RESUME at eld_notify, and if notification is ignored in this case, the original bugis hit (monitor state upon resume is lost) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 5de3666a7101..4b2cc8cb55c4 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -2654,7 +2654,7 @@ static void generic_acomp_pin_eld_notify(void *audio_ptr, int port, int dev_id) /* skip notification during system suspend (but not in runtime PM); * the state will be updated at resume */ - if (snd_power_get_state(codec->card) != SNDRV_CTL_POWER_D0) + if (codec->core.dev.power.power_state.event == PM_EVENT_SUSPEND) return; /* ditto during suspend/resume process itself */ if (snd_hdac_is_in_pm(&codec->core)) @@ -2840,7 +2840,7 @@ static void intel_pin_eld_notify(void *audio_ptr, int port, int pipe) /* skip notification during system suspend (but not in runtime PM); * the state will be updated at resume */ - if (snd_power_get_state(codec->card) != SNDRV_CTL_POWER_D0) + if (codec->core.dev.power.power_state.event == PM_EVENT_SUSPEND) return; /* ditto during suspend/resume process itself */ if (snd_hdac_is_in_pm(&codec->core)) base-commit: 1867068c322ea7a627fde8d947a9e40db32816a4 -- 2.31.0

2 1

[PATCH] ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 445 G7
by Jonas Witschel 16 Apr '21

16 Apr '21

The HP ProBook 445 G7 (17T32ES) uses ALC236. Like ALC236_FIXUP_HP_GPIO_LED, COEF index 0x34 bit 5 is used to control the playback mute LED, but the microphone mute LED is controlled using pin VREF instead of a COEF index. AlsaInfo: https://alsa-project.org/db/?f=0d3f4d1af39cc359f9fea9b550727ee87e5cf45a Signed-off-by: Jonas Witschel <diabonas(a)archlinux.org> --- sound/pci/hda/patch_realtek.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 00a15e7cfdb9..c4372d143051 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4445,6 +4445,25 @@ static void alc236_fixup_hp_mute_led(struct hda_codec *codec, alc236_fixup_hp_coef_micmute_led(codec, fix, action); } +static void alc236_fixup_hp_micmute_led_vref(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + struct alc_spec *spec = codec->spec; + + if (action == HDA_FIXUP_ACT_PRE_PROBE) { + spec->cap_mute_led_nid = 0x1a; + snd_hda_gen_add_micmute_led_cdev(codec, vref_micmute_led_set); + codec->power_filter = led_power_filter; + } +} + +static void alc236_fixup_hp_mute_led_micmute_vref(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + alc236_fixup_hp_mute_led_coefbit(codec, fix, action); + alc236_fixup_hp_micmute_led_vref(codec, fix, action); +} + #if IS_REACHABLE(CONFIG_INPUT) static void gpio2_mic_hotkey_event(struct hda_codec *codec, struct hda_jack_callback *event) @@ -6407,6 +6426,7 @@ enum { ALC285_FIXUP_HP_MUTE_LED, ALC236_FIXUP_HP_GPIO_LED, ALC236_FIXUP_HP_MUTE_LED, + ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF, ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, ALC295_FIXUP_ASUS_MIC_NO_PRESENCE, ALC269VC_FIXUP_ACER_VCOPPERBOX_PINS, @@ -7653,6 +7673,10 @@ static const struct hda_fixup alc269_fixups[] = { .type = HDA_FIXUP_FUNC, .v.func = alc236_fixup_hp_mute_led, }, + [ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc236_fixup_hp_mute_led_micmute_vref, + }, [ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET] = { .type = HDA_FIXUP_VERBS, .v.verbs = (const struct hda_verb[]) { @@ -8070,6 +8094,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x869d, "HP", ALC236_FIXUP_HP_MUTE_LED), SND_PCI_QUIRK(0x103c, 0x8724, "HP EliteBook 850 G7", ALC285_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8729, "HP", ALC285_FIXUP_HP_GPIO_LED), + SND_PCI_QUIRK(0x103c, 0x8730, "HP ProBook 445 G7", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF), SND_PCI_QUIRK(0x103c, 0x8736, "HP", ALC285_FIXUP_HP_GPIO_AMP_INIT), SND_PCI_QUIRK(0x103c, 0x8760, "HP", ALC285_FIXUP_HP_MUTE_LED), SND_PCI_QUIRK(0x103c, 0x877a, "HP", ALC285_FIXUP_HP_MUTE_LED), -- 2.31.1

2 2