April 2021 - Alsa-devel - mailman.alsa-project.org

[PATCH] Fixing most Roland-related devices' USB audio
by Lucas 01 Apr '21

01 Apr '21

At the risk of being redundant, I'm resending this with a simpler "[PATCH]" subject to reach a broader audience, since no comment has been made yet: TLDR? Please just glance at the patch at the end and include it in the kernel. :) Some days ago, I found this excellent informational post, and that Mike Oliphant's patch is in mainline now: http://blog.nostatic.org/2020/01/getting-boss-gt-1-effects-processor-to.html Since I was fairly certain it applies to the Roland devices I own, I added my USB IDs. Wonderfully, now USB audio capture seems to be working perfectly from the three devices I can test: the Boutique D-05, INTEGRA-7, & R-26! (The previously asserted VG-99 didn't need to be included in the patch for it to work.) I've also tested all three for playback capability, since that's implied when a device is using implicit feedback, which I hadn't realized the first time around. Anyway, they all seem to be working as expected for playback too. There are two caveats for playback, though: 1. The INTEGRA-7 won't output playback in any mode other than its "44.1 [kHz]" setting, though capture works with all of its Sample Rate possibilities. I think this is imposed by the hardware itself, and hence isn't a glitch. 2. The D-05's analog outputs aren't as clean as the other two devices, with little quiet occasional clicks sounding something like dust on an LP record's play. Possibly that can be due to it having only 1/8" mini-jack connections, but I suspect something more driver-related as It's not noticed during use as a synthesizer. Its firmware version is "1.02(1033)," so not up-to-date which may mean it's just the hardware itself, but I've decided not to risk any changes with it yet. If I knew I could revert it, that would be another story. Also its USB captures, play perfectly & cleanly on my usual sound device, the Edirol UA-4FX. You may know this, as the detection of these devices shows partial compatibility with the existing kernel, but here are the commands I've had to use for their sample formats: Boutique D-05: arecord -D hw:Boutique -f S32_LE -c 2 -r 96000 ./file.wav aplay -D hw:Boutique -f S32_LE -c 2 -r 96000 ./file.wav INTEGRA-7: arecord -D hw:INTEGRA7 -f S32_LE -c 2 -r 96000 ./file.wav (Then change MENU->SYSTEM->SOUND->Sampling Rate to 44.1 [kHz], otherwise its 96[kHz], and change MENU->SYSTEM->SOUND->Ext Part Source Select to USB AUDIO) arecord -D hw:INTEGRA7 -f S32_LE -c 2 -r 44100 ./file-44100.wav aplay -D hw:INTEGRA7 -f S32_LE -c 2 -r 44100 ./file-44100.wav R-26: (Through its built-in controls, first configure the MENU->AUDIO I/F SETUP->SAMPLE RATE to "96.0 kHz.") arecord -D hw:R26AUDIO -f S32_LE -r 96000 -c 2 ./file.wav aplay -D hw:R26AUDIO -f S32_LE -r 96000 -c 2 ./file.wav (Then via use of similar commands, & the "AUDIO I/F" tab on its main screen having both "LOOP BACK" & "DIRECT MONITOR" enabled, I was able to begin a new composite recording, voicing-over what I'd recorded earlier, by playing it back while interjecting - very fun!) The behavior on the vanilla kernel (whether or not "pasuspender -- cat" is running concurrently) follows. For each of these commands, dmesg is bombarded with lines like "[ 4681.162863] usb 2-1.2: Unable to change format on ep #8e: already in use" Boutique D-05: arecord -D hw:Boutique -f S32_LE -r 96000 -c 2 ./file.wav Recording WAVE './file.wav' : Signed 32 bit Little Endian, Rate 96000 Hz, Stereo (After a brief timeout, it says this & ends:) arecord: pcm_read:2153: read error: Input/output error aplay -D hw:Boutique -f S32_LE -r 96000 -c 2 ./valid-file.wav Playing WAVE './valid-file.wav' : Signed 32 bit Little Endian, Rate 96000 Hz, Stereo (After a brief timeout, it says this & ends:) aplay: pcm_write:2061: write error: Input/output error INTEGRA-7: arecord -D hw:INTEGRA7 -f S32_LE -r 96000 -c 2 ./file.wav Recording WAVE './file.wav' : Signed 32 bit Little Endian, Rate 96000 Hz, Stereo (After a brief timeout, it says this & ends:) arecord: pcm_read:2153: read error: Input/output error (Then change MENU->SYSTEM->SOUND->Sampling Rate to 44.1 [kHz], otherwise its 96[kHz], and change MENU->SYSTEM->SOUND->Ext Part Source Select to USB AUDIO) arecord -D hw:INTEGRA7 -f S32_LE -r 44100 -c 2 ./file.wav Recording WAVE './file.wav' : Signed 32 bit Little Endian, Rate 44100 Hz, Stereo (After a brief timeout, it says this & ends:) arecord: pcm_read:2153: read error: Input/output error aplay -D hw:INTEGRA7 -f S32_LE -r 44100 -c 2 ./valid-file.wav Playing WAVE './valid-file.wav' : Signed 32 bit Little Endian, Rate 44100 Hz, Stereo (After a brief timeout, it says this & ends:) aplay: pcm_write:2061: write error: Input/output error R-26: arecord -D hw:R26AUDIO -f S32_LE -r 96000 -c 2 ./file.wav Recording WAVE './file.wav' : Signed 32 bit Little Endian, Rate 96000 Hz, Stereo (After a brief timeout, it says this & ends:) arecord: pcm_read:2153: read error: Input/output error aplay -D hw:R26AUDIO -f S32_LE -r 96000 -c 2 ./valid-file.wav Playing WAVE './valid-file.wav' : Signed 32 bit Little Endian, Rate 96000 Hz, Stereo (After a brief timeout, it says this & ends:) aplay: pcm_write:2061: write error: Input/output error I searched a bit for other Roland-related devices people have had USB digital audio issues with over the years, and took the liberty of adding them to the patch too. Likely there are still more that people haven't tried or, at least, queried about issues. I hope this can be added to the mainline kernel, as this support should help many that have struggled. I, certainly, have been hoping somebody would figure this out for quite a while, and even bought a USB through/monitoring device to try to develop it myself (sadly, the software supporting that has its own bugs, so I probably should've just used wireshark). Suffice it to say, I'm quite happy to have this figured out without having had to delve into USB debugging stuff I lack experience with! :) Thanks for any comments or looking into adding this, Lucas Endres The patch follows (I removed my previous VG-99 additions since it already works): diff -Nurp linux-5.11.9.orig/sound/usb/implicit.c linux-5.11.9.roland/sound/usb/implicit.c --- linux-5.11.9.orig/sound/usb/implicit.c 2021-03-24 05:54:19.000000000 -0500 +++ linux-5.11.9.roland/sound/usb/implicit.c 2021-03-30 17:49:08.143196280 -0500 @@ -71,27 +71,87 @@ static const struct snd_usb_implicit_fb_ .ep_num = 0x84, .iface = 0 }, /* MOTU MicroBook II */ /* No quirk for playback but with capture quirk (see below) */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x00a6), /* Roland JUNO-G */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x00ad), /* Roland SH-201 */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x00c2), /* Roland SonicCell */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x00c4), /* Edirol M-16DX */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x00c7), /* Roland V-Synth GT */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x00da), /* BOSS GT-10 */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x00db), /* BOSS GT-10 Guitar Effects Processor */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x00dc), /* BOSS GT-10B */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x00de), /* Roland Fantom-G */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x00f8), /* Roland JUNO Series */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x0111), /* Roland GAIA SH-01 */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x0120), /* Roland OCTA-CAPTURE */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x0121), /* Roland OCTA-CAPTURE */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x0123), /* Roland JUNO-Gi */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x0127), /* Roland GR-55 */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x012b), /* Roland DUO-CAPTURE */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x012f), /* Roland QUAD-CAPTURE */ IMPLICIT_FB_SKIP_DEV(0x0582, 0x0130), /* BOSS BR-80 */ - IMPLICIT_FB_SKIP_DEV(0x0582, 0x0171), /* BOSS RC-505 */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x0132), /* Roland TRI-CAPTURE */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x0138), /* BOSS RC-300 */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x013e), /* Roland R-26 */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x014d), /* BOSS GT-100 */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x0150), /* Roland TD-15 */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x0151), /* Roland TD-11 */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x0158), /* Roland TD-30 */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x0159), /* Roland DUO-CAPTURE EX */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x015b), /* Roland INTEGRA-7 */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x015d), /* Roland R-88 */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x0171), /* BOSS RC-505 */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x017c), /* Roland TR-8 */ IMPLICIT_FB_SKIP_DEV(0x0582, 0x0185), /* BOSS GP-10 */ IMPLICIT_FB_SKIP_DEV(0x0582, 0x0189), /* BOSS GT-100v2 */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x01b5), /* Roland Boutique Series Synthesizer */ IMPLICIT_FB_SKIP_DEV(0x0582, 0x01d6), /* BOSS GT-1 */ IMPLICIT_FB_SKIP_DEV(0x0582, 0x01d8), /* BOSS Katana */ IMPLICIT_FB_SKIP_DEV(0x0582, 0x01e5), /* BOSS GT-001 */ - IMPLICIT_FB_SKIP_DEV(0x0582, 0x0203), /* BOSS AD-10 */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x01ff), /* Roland D-05 */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x0203), /* BOSS AD-10 */ {} /* terminator */ }; /* Implicit feedback quirk table for capture: only FIXED type */ static const struct snd_usb_implicit_fb_match capture_implicit_fb_quirks[] = { + IMPLICIT_FB_FIXED_DEV(0x0582, 0x00a6, 0x0d, 0x01), /* Roland JUNO-G */ + IMPLICIT_FB_FIXED_DEV(0x0582, 0x00ad, 0x0d, 0x01), /* Roland SH-201 */ + IMPLICIT_FB_FIXED_DEV(0x0582, 0x00c2, 0x0d, 0x01), /* Roland SonicCell */ + IMPLICIT_FB_FIXED_DEV(0x0582, 0x00c4, 0x0d, 0x01), /* Edirol M-16DX */ + IMPLICIT_FB_FIXED_DEV(0x0582, 0x00c7, 0x0d, 0x01), /* Roland V-Synth GT */ + IMPLICIT_FB_FIXED_DEV(0x0582, 0x00da, 0x0d, 0x01), /* BOSS GT-10 */ + IMPLICIT_FB_FIXED_DEV(0x0582, 0x00db, 0x0d, 0x01), /* BOSS GT-10 Guitar Effects Processor */ + IMPLICIT_FB_FIXED_DEV(0x0582, 0x00dc, 0x0d, 0x01), /* BOSS GT-10B */ + IMPLICIT_FB_FIXED_DEV(0x0582, 0x00de, 0x0d, 0x01), /* Roland Fantom-G */ + IMPLICIT_FB_FIXED_DEV(0x0582, 0x00f8, 0x0d, 0x01), /* Roland JUNO Series */ + IMPLICIT_FB_FIXED_DEV(0x0582, 0x0111, 0x0d, 0x01), /* Roland GAIA SH-01 */ + IMPLICIT_FB_FIXED_DEV(0x0582, 0x0120, 0x0d, 0x01), /* Roland OCTA-CAPTURE */ + IMPLICIT_FB_FIXED_DEV(0x0582, 0x0121, 0x0d, 0x01), /* Roland OCTA-CAPTURE */ + IMPLICIT_FB_FIXED_DEV(0x0582, 0x0123, 0x0d, 0x01), /* Roland JUNO-Gi */ + IMPLICIT_FB_FIXED_DEV(0x0582, 0x0127, 0x0d, 0x01), /* Roland GR-55 */ + IMPLICIT_FB_FIXED_DEV(0x0582, 0x012b, 0x0d, 0x01), /* Roland DUO-CAPTURE */ + IMPLICIT_FB_FIXED_DEV(0x0582, 0x012f, 0x0d, 0x01), /* Roland QUAD-CAPTURE */ IMPLICIT_FB_FIXED_DEV(0x0582, 0x0130, 0x0d, 0x01), /* BOSS BR-80 */ + IMPLICIT_FB_FIXED_DEV(0x0582, 0x0132, 0x0d, 0x01), /* Roland TRI-CAPTURE */ + IMPLICIT_FB_FIXED_DEV(0x0582, 0x0138, 0x0d, 0x01), /* BOSS RC-300 */ + IMPLICIT_FB_FIXED_DEV(0x0582, 0x013e, 0x0d, 0x01), /* Roland R-26 */ + IMPLICIT_FB_FIXED_DEV(0x0582, 0x014d, 0x0d, 0x01), /* BOSS GT-100 */ + IMPLICIT_FB_FIXED_DEV(0x0582, 0x0150, 0x0d, 0x01), /* Roland TD-15 */ + IMPLICIT_FB_FIXED_DEV(0x0582, 0x0151, 0x0d, 0x01), /* Roland TD-11 */ + IMPLICIT_FB_FIXED_DEV(0x0582, 0x0158, 0x0d, 0x01), /* Roland TD-30 */ + IMPLICIT_FB_FIXED_DEV(0x0582, 0x0159, 0x0d, 0x01), /* Roland DUO-CAPTURE EX */ + IMPLICIT_FB_FIXED_DEV(0x0582, 0x015b, 0x0d, 0x01), /* Roland INTEGRA-7 */ + IMPLICIT_FB_FIXED_DEV(0x0582, 0x015d, 0x0d, 0x01), /* Roland R-88 */ IMPLICIT_FB_FIXED_DEV(0x0582, 0x0171, 0x0d, 0x01), /* BOSS RC-505 */ + IMPLICIT_FB_FIXED_DEV(0x0582, 0x017c, 0x0d, 0x01), /* Roland TR-8 */ IMPLICIT_FB_FIXED_DEV(0x0582, 0x0185, 0x0d, 0x01), /* BOSS GP-10 */ IMPLICIT_FB_FIXED_DEV(0x0582, 0x0189, 0x0d, 0x01), /* BOSS GT-100v2 */ + IMPLICIT_FB_FIXED_DEV(0x0582, 0x01b5, 0x0d, 0x01), /* Roland Boutique Series Synthesizer */ IMPLICIT_FB_FIXED_DEV(0x0582, 0x01d6, 0x0d, 0x01), /* BOSS GT-1 */ IMPLICIT_FB_FIXED_DEV(0x0582, 0x01d8, 0x0d, 0x01), /* BOSS Katana */ IMPLICIT_FB_FIXED_DEV(0x0582, 0x01e5, 0x0d, 0x01), /* BOSS GT-001 */ + IMPLICIT_FB_FIXED_DEV(0x0582, 0x01ff, 0x0d, 0x01), /* Roland D-05 */ IMPLICIT_FB_FIXED_DEV(0x0582, 0x0203, 0x0d, 0x01), /* BOSS AD-10 */ {} /* terminator */

2 6

[PATCH] ALSA: hda/conexant: Apply quirk for another HP ZBook G5 model
by Takashi Iwai 01 Apr '21

01 Apr '21

There is another HP ZBook G5 model with the PCI SSID 103c:844f that requires the same quirk for controlling the mute LED. Add the corresponding entry to the quirk table. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212407 Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/pci/hda/patch_conexant.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index c20dad46a7c9..dfef9c17e140 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -944,6 +944,7 @@ static const struct snd_pci_quirk cxt5066_fixups[] = { SND_PCI_QUIRK(0x103c, 0x829a, "HP 800 G3 DM", CXT_FIXUP_HP_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x103c, 0x8402, "HP ProBook 645 G4", CXT_FIXUP_MUTE_LED_GPIO), SND_PCI_QUIRK(0x103c, 0x8427, "HP ZBook Studio G5", CXT_FIXUP_HP_ZBOOK_MUTE_LED), + SND_PCI_QUIRK(0x103c, 0x844f, "HP ZBook Studio G5", CXT_FIXUP_HP_ZBOOK_MUTE_LED), SND_PCI_QUIRK(0x103c, 0x8455, "HP Z2 G4", CXT_FIXUP_HP_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x103c, 0x8456, "HP Z2 G4 SFF", CXT_FIXUP_HP_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x103c, 0x8457, "HP Z2 G4 mini", CXT_FIXUP_HP_MIC_NO_PRESENCE), -- 2.26.2

1 0

[PATCH 1/2] ASoC: codecs: lpass-tx-macro: set npl clock rate correctly
by Srinivas Kandagatla 01 Apr '21

01 Apr '21

NPL clock rate is twice the MCLK rate, so set this correctly to avoid soundwire timeouts. Fixes: c39667ddcfc5 ("ASoC: codecs: lpass-tx-macro: add support for lpass tx macro") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> --- sound/soc/codecs/lpass-tx-macro.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/lpass-tx-macro.c b/sound/soc/codecs/lpass-tx-macro.c index 36d7a6442cdb..e8c6c738bbaa 100644 --- a/sound/soc/codecs/lpass-tx-macro.c +++ b/sound/soc/codecs/lpass-tx-macro.c @@ -1811,7 +1811,7 @@ static int tx_macro_probe(struct platform_device *pdev) /* set MCLK and NPL rates */ clk_set_rate(tx->clks[2].clk, MCLK_FREQ); - clk_set_rate(tx->clks[3].clk, MCLK_FREQ); + clk_set_rate(tx->clks[3].clk, 2 * MCLK_FREQ); ret = clk_bulk_prepare_enable(TX_NUM_CLKS_MAX, tx->clks); if (ret) -- 2.21.0

2 2

[PATCH] ASoC: Intel: Fix a typo
by Bhaskar Chowdhury 01 Apr '21

01 Apr '21

s/struture/structure/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar(a)gmail.com> --- sound/soc/intel/atom/sst/sst.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/intel/atom/sst/sst.h b/sound/soc/intel/atom/sst/sst.h index 4d37d39fd8f4..978bf4255888 100644 --- a/sound/soc/intel/atom/sst/sst.h +++ b/sound/soc/intel/atom/sst/sst.h @@ -344,7 +344,7 @@ struct sst_fw_save { * @block_lock : spin lock to add block to block_list and assign pvt_id * @rx_msg_lock : spin lock to handle the rx messages from the DSP * @scard_ops : sst card ops - * @pci : sst pci device struture + * @pci : sst pci device structure * @dev : pointer to current device struct * @sst_lock : sst device lock * @pvt_id : sst private id -- 2.31.0

2 1

[PATCH 1/1] ASoC: intel, keembay-i2s: Fix a dt_binding_check warning
by Zhen Lei 01 Apr '21

01 Apr '21

The property "dmas" contains two items: DMA "TX" and "RX" channel, Therefore, its value also needs to be written in two parts. Otherwise, below YAML check warning is reported: Documentation/devicetree/bindings/sound/intel,keembay-i2s.example.dt.yaml:\ i2s@20140000: dmas: [[4294967295, 29, 4294967295, 33]] is too short Signed-off-by: Zhen Lei <thunder.leizhen(a)huawei.com> --- Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml index 6f71294909a5fb4..803627e984f6089 100644 --- a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml @@ -81,6 +81,6 @@ examples: interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; clock-names = "osc", "apb_clk"; clocks = <&scmi_clk KEEM_BAY_PSS_AUX_I2S3>, <&scmi_clk KEEM_BAY_PSS_I2S3>; - dmas = <&axi_dma0 29 &axi_dma0 33>; + dmas = <&axi_dma0 29>, <&axi_dma0 33>; dma-names = "tx", "rx"; }; -- 1.8.3

3 2

[PATCH] soundwire: intel_init: test link->cdns
by Bard Liao 01 Apr '21

01 Apr '21

intel_link_probe() could return error and dev_get_drvdata() will return null in such case. So we have to test link->cdns after link->cdns = dev_get_drvdata(&ldev->auxdev.dev); Otherwise, we will meet the "kernel NULL pointer dereference" error. Signed-off-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Reviewed-by: Rander Wang <rander.wang(a)intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> --- drivers/soundwire/intel_init.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/soundwire/intel_init.c b/drivers/soundwire/intel_init.c index 5b32a2ffd376..5ef5bd0defab 100644 --- a/drivers/soundwire/intel_init.c +++ b/drivers/soundwire/intel_init.c @@ -250,6 +250,15 @@ static struct sdw_intel_ctx link = &ldev->link_res; link->cdns = dev_get_drvdata(&ldev->auxdev.dev); + if (!link->cdns) { + dev_err(&adev->dev, "failed to get link->cdns\n"); + /* + * 1 will be subtracted from i in the err label, but we need to call + * intel_link_dev_unregister for this ldev, so plus 1 now + */ + i++; + goto err; + } list_add_tail(&link->list, &ctx->link_list); bus = &link->cdns->bus; /* Calculate number of slaves */ -- 2.17.1

3 2

Fwd: [Bug 212477] EDIROL UA-101: midi is not recognized
by nick83ola 01 Apr '21

01 Apr '21

Anyone can help to debug this? ---------- Forwarded message --------- From: <bugzilla-daemon(a)bugzilla.kernel.org> Date: Thu, 1 Apr 2021 at 07:34 Subject: [Bug 212477] EDIROL UA-101: midi is not recognized To: <nick83ola(a)gmail.com> https://bugzilla.kernel.org/show_bug.cgi?id=212477 --- Comment #2 from Lucas Endres (jaffa225man(a)gmail.com) --- I hadn't realized it was working previously as I use my other Edirol UA-4FX most of the time, but I do remember the UA-101's MIDI not working for me when I tried using it too. Sure, enough, that's the case on debian's 5.9.0-1-rt-amd64 kernel now: aconnect -l | grep -i ua client 28: 'UA-4FX' [type=kernel,card=3] 0 'UA-4FX MIDI 1 ' I would've thought the two Edirol devices would use the same MIDI kernel module (snd_seq_midi and/or snd_usbmidi_lib) lsmod | grep -i snd snd_seq_dummy 16384 0 snd_ua101 28672 0 snd_seq_midi 20480 0 snd_seq_midi_event 16384 1 snd_seq_midi snd_seq 90112 4 snd_seq_midi,snd_seq_midi_event,snd_seq_dummy snd_usb_audio 319488 3 snd_usbmidi_lib 40960 2 snd_usb_audio,snd_ua101 snd_rawmidi 45056 2 snd_seq_midi,snd_usbmidi_lib snd_seq_device 16384 3 snd_seq,snd_seq_midi,snd_rawmidi mc 61440 1 snd_usb_audio snd_hda_codec_realtek 139264 1 snd_hda_codec_generic 98304 1 snd_hda_codec_realtek ledtrig_audio 16384 1 snd_hda_codec_generic snd_hda_codec_hdmi 73728 1 snd_hda_intel 57344 4 snd_intel_dspcfg 24576 1 snd_hda_intel snd_hda_codec 163840 4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek snd_hda_core 106496 5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek snd_hwdep 16384 2 snd_usb_audio,snd_hda_codec snd_pcm 135168 7 snd_hda_codec_hdmi,snd_hda_intel,snd_usb_audio,snd_hda_codec,snd_ua101,snd_hda_core snd_hrtimer 16384 1 snd_timer 45056 4 snd_seq,snd_hrtimer,snd_pcm snd 110592 27 snd_hda_codec_generic,snd_seq,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_usb_audio,snd_usbmidi_lib,snd_hda_codec,snd_hda_codec_realtek,snd_ua101,snd_timer,snd_pcm,snd_rawmidi soundcore 16384 1 snd usbcore 323584 10 xhci_hcd,ehci_pci,snd_usb_audio,usbhid,snd_usbmidi_lib,snd_ua101,usb_storage,ehci_hcd,xhci_pci,uas lsusb -vvv Bus 004 Device 003: ID 0582:007d Roland Corp. EDIROL UA-101 Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 0 bDeviceProtocol 255 bMaxPacketSize0 64 idVendor 0x0582 Roland Corp. idProduct 0x007d EDIROL UA-101 bcdDevice 1.03 iManufacturer 1 EDIROL iProduct 2 UA-101 iSerial 3 AX85615 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x009b bNumInterfaces 3 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 1 bInterfaceProtocol 2 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 1 bInterfaceProtocol 2 iInterface 0 ** UNRECOGNIZED: 07 24 01 01 00 01 00 ** UNRECOGNIZED: 0b 24 02 01 0a 04 18 01 80 bb 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0118 1x 280 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 1 bInterfaceProtocol 2 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 1 bInterfaceProtocol 2 iInterface 0 ** UNRECOGNIZED: 07 24 01 07 00 01 00 ** UNRECOGNIZED: 0b 24 02 01 0c 04 18 01 80 bb 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 37 Transfer Type Isochronous Synch Type Asynchronous Usage Type Implicit feedback Data wMaxPacketSize 0x0150 1x 336 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 1 bInterfaceProtocol 3 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 1 bInterfaceProtocol 3 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Bus 002 Device 004: ID 0582:00a3 Roland Corp. EDIROL UA-4FX Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 0 bDeviceProtocol 255 bMaxPacketSize0 8 idVendor 0x0582 Roland Corp. idProduct 0x00a3 EDIROL UA-4FX bcdDevice 1.00 iManufacturer 1 EDIROL iProduct 2 UA-4FX iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x00ca bNumInterfaces 3 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 360mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 2 bInterfaceProtocol 2 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 2 bInterfaceProtocol 2 iInterface 0 ** UNRECOGNIZED: 07 24 01 01 00 01 00 ** UNRECOGNIZED: 0b 24 02 01 02 03 18 01 80 bb 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 9 Transfer Type Isochronous Synch Type Adaptive Usage Type Data wMaxPacketSize 0x0140 1x 320 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 2 bNumEndpoints 1 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 2 bInterfaceProtocol 2 iInterface 0 ** UNRECOGNIZED: 07 24 01 02 00 01 20 ** UNRECOGNIZED: 0b 24 02 03 02 03 18 01 80 bb 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 9 Transfer Type Isochronous Synch Type Adaptive Usage Type Data wMaxPacketSize 0x0138 1x 312 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 2 bInterfaceProtocol 1 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 2 bInterfaceProtocol 1 iInterface 0 ** UNRECOGNIZED: 07 24 01 07 00 01 00 ** UNRECOGNIZED: 0b 24 02 01 02 03 18 01 80 bb 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0140 1x 320 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 3 bInterfaceProtocol 0 iInterface 0 ** UNRECOGNIZED: 06 24 f1 02 01 01 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 3 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 1 I, too, would be glad to help however possible, but don't know where to begin. I have the source for the latest mainline kernel (5.11.9), so I'd be happy to test proposed patches. -- You may reply to this email to add a comment. You are receiving this mail because: You reported the bug.

1 0

Re: [PATCH] rcar/rsnd.h: Remove repeated struct declaration
by Mark Brown 01 Apr '21

01 Apr '21

On Thu, Apr 01, 2021 at 06:37:58PM +0800, Wan Jiabing wrote: > struct rsnd_dai_stream is declared twice. One is declared > at 254th line. The blew one is not needed. Remove the duplicate. Please submit patches using subject lines reflecting the style for the subsystem, this makes it easier for people to identify relevant patches. Look at what existing commits in the area you're changing are doing and make sure your subject lines visually resemble what they're doing. There's no need to resubmit to fix this alone.

1 0

[PATCH 00/17] ASoC: remove cppcheck warnings for multiple SOCs
by Pierre-Louis Bossart 01 Apr '21

01 Apr '21

Trivial cleanups to make cppcheck less verbose. There should be no functionality change, except for the 'sti_uniperif' patch where an error check was added. Pierre-Louis Bossart (17): ASoC: amd: renoir: acp3x-pdm-dma: remove unnecessary assignments ASoC: atmel: fix shadowed variable ASoC: atmel: atmel-i2s: remove useless initialization ASoC: bcm: cygnus_ssp: remove useless initialization ASoC: meson: axg-tdmin: remove useless assignment ASoC: meson: axg-tdmout: remove useless assignment ASoC: pxa: remove useless assignment ASoC: sti: sti_uniperif: add missing error check ASoC: sti: uniperif: align function prototypes ASoC: stm: stm32_adfsdm: fix snprintf format string ASoC: sunxi: sun8i-codec: clarify expression ASoC: tegra: tegra20_das: clarify expression ASoC: tegra: tegra20_das: align function prototypes ASoC: ti: omap-abe-twl6040: remove useless assignment ASoC: ti: omap-mcsp: remove duplicate test ASoC: ux500: mop500: rename shadowing variable ASoC: ux500: mop500: align function prototype sound/soc/amd/renoir/acp3x-pdm-dma.c | 2 -- sound/soc/atmel/atmel-classd.c | 6 +++--- sound/soc/atmel/atmel-i2s.c | 2 +- sound/soc/bcm/cygnus-ssp.c | 2 +- sound/soc/meson/axg-tdmin.c | 2 +- sound/soc/meson/axg-tdmout.c | 2 +- sound/soc/pxa/mmp-pcm.c | 2 +- sound/soc/sti/sti_uniperif.c | 2 ++ sound/soc/sti/uniperif.h | 4 ++-- sound/soc/stm/stm32_adfsdm.c | 2 +- sound/soc/sunxi/sun8i-codec.c | 2 +- sound/soc/tegra/tegra20_das.c | 8 ++++---- sound/soc/tegra/tegra20_das.h | 6 +++--- sound/soc/ti/omap-abe-twl6040.c | 2 +- sound/soc/ti/omap-mcbsp.c | 3 +-- sound/soc/ux500/mop500.c | 6 +++--- sound/soc/ux500/mop500_ab8500.h | 2 +- 17 files changed, 27 insertions(+), 28 deletions(-) -- 2.25.1

7 27

[PATCH 0/3] ASoC: dt-bindings: Rework audio-graph-port schema
by Rob Herring 01 Apr '21

01 Apr '21

This series refactors the audio-graph-port.yaml schema moving the 'port' node out of the schema and updating to use graph.yaml schema. This allows users to define what each 'port' node is like other graph binding users. Rob Cc: alsa-devel(a)alsa-project.org Cc: linux-tegra(a)vger.kernel.org Cc: Jonathan Hunter <jonathanh(a)nvidia.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Cc: Liam Girdwood <lgirdwood(a)gmail.com> Cc: Lubomir Rintel <lkundrak(a)v3.sk> Cc: Mark Brown <broonie(a)kernel.org> Cc: Masahiro Yamada <yamada.masahiro(a)socionext.com> Cc: Sameer Pujar <spujar(a)nvidia.com> Cc: Thierry Reding <thierry.reding(a)gmail.com> Rob Herring (3): ASoC: dt-bindings: Move port/ports properties out of audio-graph-port.yaml ASoC: dt-bindings: Use OF graph schema ASoC: dt-bindings: socionext: Use audio-graph-port schema .../bindings/sound/audio-graph-port.yaml | 104 ++++++++---------- .../bindings/sound/marvell,mmp-sspa.yaml | 6 +- .../bindings/sound/nvidia,tegra186-dspk.yaml | 11 +- .../sound/nvidia,tegra210-admaif.yaml | 11 +- .../bindings/sound/nvidia,tegra210-ahub.yaml | 11 +- .../bindings/sound/nvidia,tegra210-dmic.yaml | 11 +- .../bindings/sound/nvidia,tegra210-i2s.yaml | 11 +- .../bindings/sound/renesas,rsnd.yaml | 5 +- .../sound/socionext,uniphier-aio.yaml | 8 +- .../sound/socionext,uniphier-evea.yaml | 8 +- 10 files changed, 89 insertions(+), 97 deletions(-) -- 2.27.0

2 6