October 2021 - Alsa-devel - mailman.alsa-project.org

[PATCH] ALSA: usb-audio: Always apply the hw constraints for implicit fb sync
by Takashi Iwai 22 Apr '22

22 Apr '22

Since the commit 5a6c3e11c9c9 ("ALSA: usb-audio: Add hw constraint for implicit fb sync"), we apply the hw constraints for the implicit feedback sync to make the secondary open aligned with the already opened stream setup. This change assumed that the secondary open is performed after the first stream has been already set up, and adds the hw constraints to sync with the first stream's parameters only when the EP setup for the first stream was confirmed at the open time. However, most of applications handling the full-duplex operations do open both playback and capture streams at first, then set up both streams. This results in skipping the additional hw constraints since the counter-part stream hasn't been set up yet at the open of the second stream, and it eventually leads to "incompatible EP" error in the end. This patch corrects the behavior by always applying the hw constraints for the implicit fb sync. The hw constraint rules are defined so that they check the sync EP dynamically at each invocation, instead. This covers the concurrent stream setups better and lets the hw refine calls resolving to the right configuration. Also this patch corrects a minor error that has existed in the debug print that isn't built as default. Fixes: 5a6c3e11c9c9 ("ALSA: usb-audio: Add hw constraint for implicit fb sync") Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- This patched was developed primarily as an attemp for the regression of Pioneer devices. Although Pioneer devices have still some issues after this patch, this one itself should be good for all devices in general. Keith, Dylan, could you verify that this doesn't break things for your devices? sound/usb/pcm.c | 171 ++++++++++++++++++++++++++++++------------------ 1 file changed, 108 insertions(+), 63 deletions(-) diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index 56079901769f..f71965bf815f 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -663,7 +663,7 @@ static int hw_check_valid_format(struct snd_usb_substream *subs, check_fmts.bits[1] = (u32)(fp->formats >> 32); snd_mask_intersect(&check_fmts, fmts); if (snd_mask_empty(&check_fmts)) { - hwc_debug(" > check: no supported format %d\n", fp->format); + hwc_debug(" > check: no supported format 0x%llx\n", fp->formats); return 0; } /* check the channels */ @@ -775,24 +775,11 @@ static int hw_rule_channels(struct snd_pcm_hw_params *params, return apply_hw_params_minmax(it, rmin, rmax); } -static int hw_rule_format(struct snd_pcm_hw_params *params, - struct snd_pcm_hw_rule *rule) +static int apply_hw_params_format_bits(struct snd_mask *fmt, u64 fbits) { - struct snd_usb_substream *subs = rule->private; - const struct audioformat *fp; - struct snd_mask *fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); - u64 fbits; u32 oldbits[2]; int changed; - hwc_debug("hw_rule_format: %x:%x\n", fmt->bits[0], fmt->bits[1]); - fbits = 0; - list_for_each_entry(fp, &subs->fmt_list, list) { - if (!hw_check_valid_format(subs, params, fp)) - continue; - fbits |= fp->formats; - } - oldbits[0] = fmt->bits[0]; oldbits[1] = fmt->bits[1]; fmt->bits[0] &= (u32)fbits; @@ -806,6 +793,24 @@ static int hw_rule_format(struct snd_pcm_hw_params *params, return changed; } +static int hw_rule_format(struct snd_pcm_hw_params *params, + struct snd_pcm_hw_rule *rule) +{ + struct snd_usb_substream *subs = rule->private; + const struct audioformat *fp; + struct snd_mask *fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); + u64 fbits; + + hwc_debug("hw_rule_format: %x:%x\n", fmt->bits[0], fmt->bits[1]); + fbits = 0; + list_for_each_entry(fp, &subs->fmt_list, list) { + if (!hw_check_valid_format(subs, params, fp)) + continue; + fbits |= fp->formats; + } + return apply_hw_params_format_bits(fmt, fbits); +} + static int hw_rule_period_time(struct snd_pcm_hw_params *params, struct snd_pcm_hw_rule *rule) { @@ -833,64 +838,92 @@ static int hw_rule_period_time(struct snd_pcm_hw_params *params, return apply_hw_params_minmax(it, pmin, UINT_MAX); } -/* apply PCM hw constraints from the concurrent sync EP */ -static int apply_hw_constraint_from_sync(struct snd_pcm_runtime *runtime, - struct snd_usb_substream *subs) +/* get the EP or the sync EP for implicit fb when it's already set up */ +static const struct snd_usb_endpoint * +get_sync_ep_from_substream(struct snd_usb_substream *subs) { struct snd_usb_audio *chip = subs->stream->chip; - struct snd_usb_endpoint *ep; const struct audioformat *fp; - int err; + const struct snd_usb_endpoint *ep; list_for_each_entry(fp, &subs->fmt_list, list) { ep = snd_usb_get_endpoint(chip, fp->endpoint); if (ep && ep->cur_rate) - goto found; + return ep; if (!fp->implicit_fb) continue; /* for the implicit fb, check the sync ep as well */ ep = snd_usb_get_endpoint(chip, fp->sync_ep); if (ep && ep->cur_rate) - goto found; + return ep; } - return 0; + return NULL; +} + +/* additional hw constraints for implicit feedback mode */ +static int hw_rule_format_implicit_fb(struct snd_pcm_hw_params *params, + struct snd_pcm_hw_rule *rule) +{ + struct snd_usb_substream *subs = rule->private; + const struct snd_usb_endpoint *ep; + struct snd_mask *fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); - found: - if (!find_format(&subs->fmt_list, ep->cur_format, ep->cur_rate, - ep->cur_channels, false, NULL)) { - usb_audio_dbg(chip, "EP 0x%x being used, but not applicable\n", - ep->ep_num); + ep = get_sync_ep_from_substream(subs); + if (!ep) return 0; - } - usb_audio_dbg(chip, "EP 0x%x being used, using fixed params:\n", - ep->ep_num); - usb_audio_dbg(chip, "rate=%d, period_size=%d, periods=%d\n", - ep->cur_rate, ep->cur_period_frames, - ep->cur_buffer_periods); + hwc_debug("applying %s\n", __func__); + return apply_hw_params_format_bits(fmt, pcm_format_to_bits(ep->cur_format)); +} - runtime->hw.formats = subs->formats; - runtime->hw.rate_min = runtime->hw.rate_max = ep->cur_rate; - runtime->hw.rates = SNDRV_PCM_RATE_KNOT; - runtime->hw.periods_min = runtime->hw.periods_max = - ep->cur_buffer_periods; +static int hw_rule_rate_implicit_fb(struct snd_pcm_hw_params *params, + struct snd_pcm_hw_rule *rule) +{ + struct snd_usb_substream *subs = rule->private; + const struct snd_usb_endpoint *ep; + struct snd_interval *it; - err = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS, - hw_rule_channels, subs, - SNDRV_PCM_HW_PARAM_FORMAT, - SNDRV_PCM_HW_PARAM_RATE, - -1); - if (err < 0) - return err; + ep = get_sync_ep_from_substream(subs); + if (!ep) + return 0; - err = snd_pcm_hw_constraint_minmax(runtime, - SNDRV_PCM_HW_PARAM_PERIOD_SIZE, - ep->cur_period_frames, - ep->cur_period_frames); - if (err < 0) - return err; + hwc_debug("applying %s\n", __func__); + it = hw_param_interval(params, SNDRV_PCM_HW_PARAM_RATE); + return apply_hw_params_minmax(it, ep->cur_rate, ep->cur_rate); +} + +static int hw_rule_period_size_implicit_fb(struct snd_pcm_hw_params *params, + struct snd_pcm_hw_rule *rule) +{ + struct snd_usb_substream *subs = rule->private; + const struct snd_usb_endpoint *ep; + struct snd_interval *it; - return 1; /* notify the finding */ + ep = get_sync_ep_from_substream(subs); + if (!ep) + return 0; + + hwc_debug("applying %s\n", __func__); + it = hw_param_interval(params, SNDRV_PCM_HW_PARAM_PERIOD_SIZE); + return apply_hw_params_minmax(it, ep->cur_period_frames, + ep->cur_period_frames); +} + +static int hw_rule_periods_implicit_fb(struct snd_pcm_hw_params *params, + struct snd_pcm_hw_rule *rule) +{ + struct snd_usb_substream *subs = rule->private; + const struct snd_usb_endpoint *ep; + struct snd_interval *it; + + ep = get_sync_ep_from_substream(subs); + if (!ep) + return 0; + + hwc_debug("applying %s\n", __func__); + it = hw_param_interval(params, SNDRV_PCM_HW_PARAM_PERIODS); + return apply_hw_params_minmax(it, ep->cur_buffer_periods, + ep->cur_buffer_periods); } /* @@ -899,20 +932,11 @@ static int apply_hw_constraint_from_sync(struct snd_pcm_runtime *runtime, static int setup_hw_info(struct snd_pcm_runtime *runtime, struct snd_usb_substream *subs) { - struct snd_usb_audio *chip = subs->stream->chip; const struct audioformat *fp; unsigned int pt, ptmin; int param_period_time_if_needed = -1; int err; - mutex_lock(&chip->mutex); - err = apply_hw_constraint_from_sync(runtime, subs); - mutex_unlock(&chip->mutex); - if (err < 0) - return err; - if (err > 0) /* found the matching? */ - goto add_extra_rules; - runtime->hw.formats = subs->formats; runtime->hw.rate_min = 0x7fffffff; @@ -964,7 +988,6 @@ static int setup_hw_info(struct snd_pcm_runtime *runtime, struct snd_usb_substre if (err < 0) return err; -add_extra_rules: err = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS, hw_rule_channels, subs, SNDRV_PCM_HW_PARAM_FORMAT, @@ -993,6 +1016,28 @@ static int setup_hw_info(struct snd_pcm_runtime *runtime, struct snd_usb_substre return err; } + /* additional hw constraints for implicit fb */ + err = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_FORMAT, + hw_rule_format_implicit_fb, subs, + SNDRV_PCM_HW_PARAM_FORMAT, -1); + if (err < 0) + return err; + err = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, + hw_rule_rate_implicit_fb, subs, + SNDRV_PCM_HW_PARAM_RATE, -1); + if (err < 0) + return err; + err = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_SIZE, + hw_rule_period_size_implicit_fb, subs, + SNDRV_PCM_HW_PARAM_PERIOD_SIZE, -1); + if (err < 0) + return err; + err = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_PERIODS, + hw_rule_periods_implicit_fb, subs, + SNDRV_PCM_HW_PARAM_PERIODS, -1); + if (err < 0) + return err; + return 0; } -- 2.26.2

2 1

[alsa-devel] [PATCH 00/46] ARM: pxa: towards multiplatform support
by Arnd Bergmann 19 Apr '22

19 Apr '22

Hi PXA maintainers, I'm in the process of getting the old ARM platforms to all build in a single kernel. The largest part of that work is changing all the device drivers to no longer require mach/*.h header files. This series does it for arch/pxa/. As with the omap1 and s3c24xx series I sent before, I don't expect this all to be correct in the first version, though a lot of the patches are fairly simple and I did exhaustive compile-time testing on them. Please test if you have the hardware, or review! Arnd Bcc: Alexandre Belloni <alexandre.belloni(a)bootlin.com> Bcc: alsa-devel(a)alsa-project.org Bcc: Bartlomiej Zolnierkiewicz <b.zolnierkie(a)samsung.com> Bcc: Brian Norris <computersforpeace(a)gmail.com> Bcc: Daniel Thompson <daniel.thompson(a)linaro.org> Bcc: David Woodhouse <dwmw2(a)infradead.org> Bcc: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Bcc: Dominik Brodowski <linux(a)dominikbrodowski.net> Bcc: dri-devel(a)lists.freedesktop.org Bcc: Felipe Balbi <balbi(a)kernel.org> Bcc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Bcc: Guenter Roeck <linux(a)roeck-us.net> Bcc: Jacek Anaszewski <jacek.anaszewski(a)gmail.com> Bcc: Jens Axboe <axboe(a)kernel.dk> Bcc: Jingoo Han <jingoohan1(a)gmail.com> Bcc: Jonathan Cameron <jic23(a)cam.ac.uk> Bcc: Lee Jones <lee.jones(a)linaro.org> Bcc: Lubomir Rintel <lkundrak(a)v3.sk> Bcc: Marek Vasut <marek.vasut(a)gmail.com> Bcc: Mark Brown <broonie(a)kernel.org> Bcc: Michael Turquette <mturquette(a)baylibre.com> Bcc: Miquel Raynal <miquel.raynal(a)bootlin.com> Bcc: Paul Parsons <lost.distance(a)yahoo.com> Bcc: Pavel Machek <pavel(a)ucw.cz> Bcc: Philipp Zabel <philipp.zabel(a)gmail.com> Bcc: "Rafael J. Wysocki" <rjw(a)rjwysocki.net> Bcc: Richard Weinberger <richard(a)nod.at> Bcc: Russell King <linux(a)armlinux.org.uk> Bcc: Sebastian Reichel <sre(a)kernel.org> Bcc: Sergey Lapin <slapin(a)ossfans.org> Bcc: Stephen Boyd <sboyd(a)kernel.org> Bcc: Tomas Cech <sleep_walker(a)suse.com> Bcc: Ulf Hansson <ulf.hansson(a)linaro.org> Bcc: Vignesh Raghavendra <vigneshr(a)ti.com> Bcc: Viresh Kumar <viresh.kumar(a)linaro.org> Bcc: Wim Van Sebroeck <wim(a)linux-watchdog.org> Cc: linux-clk(a)vger.kernel.org Cc: linux-fbdev(a)vger.kernel.org Cc: linux-ide(a)vger.kernel.org Cc: linux-input(a)vger.kernel.org Cc: linux-leds(a)vger.kernel.org Cc: linux-mmc(a)vger.kernel.org Cc: linux-mtd(a)lists.infradead.org Cc: linux-pm(a)vger.kernel.org Cc: linux-rtc(a)vger.kernel.org Cc: linux-usb(a)vger.kernel.org Cc: linux-watchdog(a)vger.kernel.org Arnd Bergmann (46): ARM: pxa: split mach/generic.h ARM: pxa: make mainstone.h private ARM: pxa: make mach/regs-uart.h private ARM: pxa: remove mach/dma.h ARM: pxa: split up mach/hardware.h ARM: pxa: stop using mach/bitfield.h ARM: pxa: move mach/sound.h to linux/platform_data/ ARM: pxa: move regs-lcd.h into driver watchdog: sa1100: use platform device registration ARM: pxa: pxa2xx-ac97-lib: use IRQ resource ARM: pxa: cmx270: use platform device for nand ARM: pxa: make addr-map.h header local ARM: pxa: move pcmcia board data into mach-pxa ARM: pxa: use pdev resource for palmld mmio ARM: pxa: maybe fix gpio lookup tables ARM: pxa: tosa: use gpio descriptor for audio ARM: pxa: poodle: use platform data for poodle asoc driver ARM: pxa: corgi: use gpio descriptors for audio ARM: pxa: hx4700: use gpio descriptors for audio ARM: pxa: lubbock: pass udc irqs as resource ARM: pxa: spitz: use gpio descriptors for audio ARM: pxa: eseries: use gpio lookup for audio ARM: pxa: z2: use gpio lookup for audio device ARM: pxa: magician: use platform driver for audio ARM: pxa: mainstone-wm97xx: use gpio lookup table ARM: pxa: zylonite: use gpio lookup instead mfp header input: touchscreen: mainstone: fix pxa2xx+pxa3xx configuration input: touchscreen: mainstone: sync with zylonite driver Input: touchscreen: use wrapper for pxa2xx ac97 registers SoC: pxa: use pdev resource for FIFO regs ASoC: pxa: ac97: use normal MMIO accessors ASoC: pxa: i2s: use normal MMIO accessors ARM: pxa: pcmcia: move smemc configuration back to arch ARM: pxa: remove get_clk_frequency_khz() cpufreq: pxa3: move clk register access to clk driver ARM: pxa: move smemc register access from clk to platform ARM: pxa: move clk register definitions to driver video: backlight: tosa: use gpio lookup table power: tosa: simplify probe function ARM: pxa: tosa: use gpio lookup for battery ARM: pxa: move it8152 PCI support into machine ARM: pxa: remove unused mach/bitfield.h ARM: pxa: pci-it8152: add platform checks ARM: mmp: remove tavorevb board support ARM: mmp: rename pxa_register_device ARM: pxa: move plat-pxa to drivers/soc/ arch/arm/Kconfig | 9 - arch/arm/Makefile | 1 - arch/arm/common/Makefile | 1 - arch/arm/common/locomo.c | 1 - arch/arm/common/sa1111.c | 5 +- arch/arm/include/asm/hardware/sa1111.h | 2 - arch/arm/mach-mmp/Kconfig | 10 +- arch/arm/mach-mmp/Makefile | 1 - arch/arm/mach-mmp/devices.c | 2 +- arch/arm/mach-mmp/devices.h | 10 +- arch/arm/mach-mmp/mfp.h | 2 +- arch/arm/mach-mmp/mmp2.h | 48 ++--- arch/arm/mach-mmp/pxa168.h | 60 +++--- arch/arm/mach-mmp/pxa910.h | 38 ++-- arch/arm/mach-mmp/tavorevb.c | 113 ----------- arch/arm/mach-mmp/ttc_dkb.c | 6 +- arch/arm/mach-pxa/Kconfig | 8 +- arch/arm/mach-pxa/Makefile | 22 +- .../mach-pxa/{include/mach => }/addr-map.h | 0 .../arm/mach-pxa/balloon3-pcmcia.c | 4 +- arch/arm/mach-pxa/balloon3.c | 4 +- .../mach-pxa/{include/mach => }/balloon3.h | 2 +- arch/arm/mach-pxa/cm-x270.c | 25 +++ arch/arm/mach-pxa/cm-x2xx-pci.c | 2 +- arch/arm/mach-pxa/cm-x2xx.c | 7 +- arch/arm/mach-pxa/cm-x300.c | 12 +- .../arm/mach-pxa/cm_x255-pcmcia.c | 2 +- .../arm/mach-pxa/cm_x270-pcmcia.c | 2 +- .../arm/mach-pxa/cm_x2xx-pcmcia.c | 2 +- arch/arm/mach-pxa/colibri-evalboard.c | 1 - .../arm/mach-pxa/colibri-pcmcia.c | 2 +- arch/arm/mach-pxa/colibri-pxa270-income.c | 1 - arch/arm/mach-pxa/colibri-pxa270.c | 2 +- arch/arm/mach-pxa/colibri-pxa300.c | 3 +- arch/arm/mach-pxa/colibri-pxa320.c | 2 +- arch/arm/mach-pxa/colibri-pxa3xx.c | 1 - arch/arm/mach-pxa/corgi.c | 23 ++- arch/arm/mach-pxa/{include/mach => }/corgi.h | 2 +- arch/arm/mach-pxa/corgi_pm.c | 3 +- arch/arm/mach-pxa/csb726.c | 3 +- arch/arm/mach-pxa/devices.c | 15 +- .../arm/mach-pxa/e740-pcmcia.c | 2 +- arch/arm/mach-pxa/em-x270.c | 2 +- arch/arm/mach-pxa/eseries.c | 34 +++- arch/arm/mach-pxa/ezx.c | 1 - arch/arm/mach-pxa/generic.c | 78 ++++++-- arch/arm/mach-pxa/generic.h | 9 - arch/arm/mach-pxa/gumstix.c | 1 - .../arm/mach-pxa/hx4700-pcmcia.c | 4 +- arch/arm/mach-pxa/hx4700.c | 18 +- arch/arm/mach-pxa/{include/mach => }/hx4700.h | 2 +- arch/arm/mach-pxa/idp.c | 2 - arch/arm/mach-pxa/include/mach/bitfield.h | 114 ----------- arch/arm/mach-pxa/include/mach/dma.h | 17 -- arch/arm/mach-pxa/include/mach/generic.h | 1 - arch/arm/mach-pxa/include/mach/mfp.h | 2 +- arch/arm/mach-pxa/include/mach/pxa-regs.h | 52 +++++ arch/arm/mach-pxa/include/mach/pxa2xx-regs.h | 47 +---- arch/arm/mach-pxa/include/mach/pxa3xx-regs.h | 71 +------ arch/arm/mach-pxa/include/mach/regs-ost.h | 4 +- arch/arm/mach-pxa/include/mach/reset.h | 2 +- arch/arm/mach-pxa/include/mach/tosa.h | 15 -- arch/arm/mach-pxa/irq.c | 3 +- arch/arm/mach-pxa/littleton.c | 1 - arch/arm/mach-pxa/lpd270.c | 4 +- arch/arm/mach-pxa/lubbock.c | 15 +- .../arm/mach-pxa/{include/mach => }/lubbock.h | 2 - arch/arm/mach-pxa/magician.c | 54 ++++- arch/arm/mach-pxa/mainstone.c | 15 +- .../mach-pxa/{include/mach => }/mainstone.h | 2 - arch/arm/mach-pxa/mfp-pxa2xx.c | 1 + arch/arm/mach-pxa/mfp-pxa2xx.h | 2 +- arch/arm/mach-pxa/mfp-pxa3xx.c | 1 - arch/arm/mach-pxa/mfp-pxa3xx.h | 2 +- arch/arm/mach-pxa/mioa701.c | 2 +- arch/arm/mach-pxa/mxm8x10.c | 8 +- arch/arm/mach-pxa/palm27x.c | 2 +- .../arm/mach-pxa/palmld-pcmcia.c | 5 +- arch/arm/mach-pxa/palmld.c | 23 ++- arch/arm/mach-pxa/{include/mach => }/palmld.h | 2 +- arch/arm/mach-pxa/palmt5.c | 11 +- .../arm/mach-pxa/palmtc-pcmcia.c | 4 +- arch/arm/mach-pxa/palmtc.c | 4 +- arch/arm/mach-pxa/{include/mach => }/palmtc.h | 2 +- arch/arm/mach-pxa/palmte2.c | 2 +- arch/arm/mach-pxa/palmtreo.c | 2 +- .../arm/mach-pxa/palmtx-pcmcia.c | 4 +- arch/arm/mach-pxa/palmtx.c | 13 +- arch/arm/mach-pxa/{include/mach => }/palmtx.h | 2 +- arch/arm/mach-pxa/palmz72.c | 2 +- .../it8152.c => mach-pxa/pci-it8152.c} | 25 ++- .../it8152.h => mach-pxa/pci-it8152.h} | 2 - arch/arm/mach-pxa/pcm990-baseboard.c | 2 +- arch/arm/mach-pxa/poodle.c | 31 ++- arch/arm/mach-pxa/{include/mach => }/poodle.h | 4 +- arch/arm/mach-pxa/pxa-regs.h | 1 + arch/arm/mach-pxa/pxa25x.c | 6 +- arch/arm/mach-pxa/pxa25x.h | 2 +- arch/arm/mach-pxa/pxa27x-udc.h | 2 + arch/arm/mach-pxa/pxa27x.c | 6 +- arch/arm/mach-pxa/pxa27x.h | 2 +- arch/arm/mach-pxa/pxa2xx.c | 1 - arch/arm/mach-pxa/pxa300.c | 1 + arch/arm/mach-pxa/pxa320.c | 1 + arch/arm/mach-pxa/pxa3xx-ulpi.c | 2 +- arch/arm/mach-pxa/pxa3xx.c | 11 +- arch/arm/mach-pxa/pxa3xx.h | 2 +- arch/arm/mach-pxa/pxa930.c | 1 + arch/arm/mach-pxa/regs-rtc.h | 2 +- arch/arm/mach-pxa/regs-u2d.h | 2 - .../mach-pxa/{include/mach => }/regs-uart.h | 2 + arch/arm/mach-pxa/reset.c | 3 - arch/arm/mach-pxa/sleep.S | 5 +- arch/arm/mach-pxa/smemc.c | 11 +- arch/arm/mach-pxa/spitz.c | 33 ++- arch/arm/mach-pxa/{include/mach => }/spitz.h | 2 +- arch/arm/mach-pxa/spitz_pm.c | 3 +- arch/arm/mach-pxa/standby.S | 1 - .../arm/mach-pxa/stargate2-pcmcia.c | 2 +- arch/arm/mach-pxa/tosa.c | 63 +++++- .../arm/mach-pxa/trizeps4-pcmcia.c | 4 +- arch/arm/mach-pxa/trizeps4.c | 4 +- .../mach-pxa/{include/mach => }/trizeps4.h | 3 +- .../arm/mach-pxa/viper-pcmcia.c | 6 +- .../arm/mach-pxa/viper-pcmcia.h | 0 arch/arm/mach-pxa/viper.c | 8 +- .../arm/mach-pxa/vpac270-pcmcia.c | 4 +- arch/arm/mach-pxa/vpac270.c | 4 +- .../arm/mach-pxa/{include/mach => }/vpac270.h | 0 arch/arm/mach-pxa/xcep.c | 2 +- arch/arm/mach-pxa/z2.c | 11 + arch/arm/mach-pxa/zeus.c | 6 +- arch/arm/mach-pxa/zylonite.c | 34 +++- arch/arm/mach-pxa/zylonite.h | 2 + arch/arm/mach-pxa/zylonite_pxa300.c | 1 + arch/arm/mach-pxa/zylonite_pxa320.c | 1 + arch/arm/mach-sa1100/generic.c | 6 +- arch/arm/mach-sa1100/include/mach/reset.h | 1 - drivers/ata/pata_palmld.c | 3 +- drivers/clk/pxa/clk-pxa.c | 8 +- drivers/clk/pxa/clk-pxa.h | 9 +- drivers/clk/pxa/clk-pxa25x.c | 46 ++--- drivers/clk/pxa/clk-pxa27x.c | 68 +++---- drivers/clk/pxa/clk-pxa3xx.c | 139 +++++++++++-- drivers/cpufreq/pxa2xx-cpufreq.c | 6 +- drivers/cpufreq/pxa3xx-cpufreq.c | 65 +++--- drivers/input/mouse/pxa930_trkball.c | 1 - drivers/input/touchscreen/Kconfig | 2 + drivers/input/touchscreen/mainstone-wm97xx.c | 123 ++++++------ drivers/input/touchscreen/zylonite-wm97xx.c | 34 ++-- drivers/leds/leds-locomo.c | 1 - drivers/mmc/host/pxamci.c | 2 +- drivers/mtd/maps/pxa2xx-flash.c | 2 - drivers/mtd/nand/raw/cmx270_nand.c | 89 +++------ drivers/pcmcia/Makefile | 16 -- drivers/pcmcia/pxa2xx_base.c | 48 ++--- drivers/pcmcia/pxa2xx_sharpsl.c | 3 +- drivers/pcmcia/sa1111_generic.c | 1 - drivers/pcmcia/sa1111_lubbock.c | 1 - drivers/pcmcia/soc_common.c | 2 - drivers/pcmcia/soc_common.h | 120 +---------- drivers/power/supply/tosa_battery.c | 189 ++++++++++-------- drivers/rtc/rtc-pxa.c | 2 - drivers/soc/Kconfig | 1 + drivers/soc/Makefile | 1 + .../arm/plat-pxa => drivers/soc/pxa}/Kconfig | 5 +- .../arm/plat-pxa => drivers/soc/pxa}/Makefile | 4 - {arch/arm/plat-pxa => drivers/soc/pxa}/mfp.c | 2 +- {arch/arm/plat-pxa => drivers/soc/pxa}/ssp.c | 0 drivers/usb/gadget/udc/pxa25x_udc.c | 37 ++-- drivers/usb/gadget/udc/pxa25x_udc.h | 7 +- drivers/usb/host/ohci-pxa27x.c | 3 +- drivers/video/backlight/tosa_bl.c | 10 +- drivers/video/backlight/tosa_bl.h | 8 + drivers/video/backlight/tosa_lcd.c | 28 ++- .../video/fbdev/pxa3xx-regs.h | 24 +-- drivers/video/fbdev/pxafb.c | 4 +- drivers/watchdog/sa1100_wdt.c | 88 +++++--- include/linux/clk/pxa.h | 16 ++ include/linux/platform_data/asoc-poodle.h | 16 ++ .../linux/platform_data/asoc-pxa.h | 4 +- include/linux/platform_data/video-pxafb.h | 22 +- .../hardware.h => include/linux/soc/pxa/cpu.h | 61 +----- .../plat => include/linux/soc/pxa}/mfp.h | 6 +- include/linux/soc/pxa/smemc.h | 13 ++ include/pcmcia/soc_common.h | 125 ++++++++++++ include/sound/pxa2xx-lib.h | 4 + sound/arm/pxa2xx-ac97-lib.c | 145 +++++++++----- .../arm/pxa2xx-ac97-regs.h | 42 ++-- sound/arm/pxa2xx-ac97.c | 3 +- sound/soc/pxa/corgi.c | 42 ++-- sound/soc/pxa/e740_wm9705.c | 37 ++-- sound/soc/pxa/e750_wm9705.c | 33 ++- sound/soc/pxa/e800_wm9712.c | 33 ++- sound/soc/pxa/em-x270.c | 2 +- sound/soc/pxa/hx4700.c | 34 ++-- sound/soc/pxa/magician.c | 141 ++++--------- sound/soc/pxa/mioa701_wm9713.c | 2 +- sound/soc/pxa/palm27x.c | 2 +- sound/soc/pxa/poodle.c | 51 ++--- sound/soc/pxa/pxa2xx-ac97.c | 24 ++- sound/soc/pxa/pxa2xx-i2s.c | 112 ++++++----- sound/soc/pxa/spitz.c | 58 +++--- sound/soc/pxa/tosa.c | 18 +- sound/soc/pxa/z2.c | 8 +- 205 files changed, 1916 insertions(+), 1795 deletions(-) delete mode 100644 arch/arm/mach-mmp/tavorevb.c rename arch/arm/mach-pxa/{include/mach => }/addr-map.h (100%) rename drivers/pcmcia/pxa2xx_balloon3.c => arch/arm/mach-pxa/balloon3-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/balloon3.h (99%) rename drivers/pcmcia/pxa2xx_cm_x255.c => arch/arm/mach-pxa/cm_x255-pcmcia.c (98%) rename drivers/pcmcia/pxa2xx_cm_x270.c => arch/arm/mach-pxa/cm_x270-pcmcia.c (98%) rename drivers/pcmcia/pxa2xx_cm_x2xx.c => arch/arm/mach-pxa/cm_x2xx-pcmcia.c (96%) rename drivers/pcmcia/pxa2xx_colibri.c => arch/arm/mach-pxa/colibri-pcmcia.c (99%) rename arch/arm/mach-pxa/{include/mach => }/corgi.h (98%) rename drivers/pcmcia/pxa2xx_e740.c => arch/arm/mach-pxa/e740-pcmcia.c (98%) rename drivers/pcmcia/pxa2xx_hx4700.c => arch/arm/mach-pxa/hx4700-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/hx4700.h (99%) delete mode 100644 arch/arm/mach-pxa/include/mach/bitfield.h delete mode 100644 arch/arm/mach-pxa/include/mach/dma.h delete mode 100644 arch/arm/mach-pxa/include/mach/generic.h create mode 100644 arch/arm/mach-pxa/include/mach/pxa-regs.h rename arch/arm/mach-pxa/{include/mach => }/lubbock.h (97%) rename arch/arm/mach-pxa/{include/mach => }/mainstone.h (99%) rename drivers/pcmcia/pxa2xx_palmld.c => arch/arm/mach-pxa/palmld-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/palmld.h (98%) rename drivers/pcmcia/pxa2xx_palmtc.c => arch/arm/mach-pxa/palmtc-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/palmtc.h (98%) rename drivers/pcmcia/pxa2xx_palmtx.c => arch/arm/mach-pxa/palmtx-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/palmtx.h (98%) rename arch/arm/{common/it8152.c => mach-pxa/pci-it8152.c} (95%) rename arch/arm/{include/asm/hardware/it8152.h => mach-pxa/pci-it8152.h} (98%) rename arch/arm/mach-pxa/{include/mach => }/poodle.h (97%) create mode 100644 arch/arm/mach-pxa/pxa-regs.h rename arch/arm/mach-pxa/{include/mach => }/regs-uart.h (99%) rename arch/arm/mach-pxa/{include/mach => }/spitz.h (99%) rename drivers/pcmcia/pxa2xx_stargate2.c => arch/arm/mach-pxa/stargate2-pcmcia.c (99%) rename drivers/pcmcia/pxa2xx_trizeps4.c => arch/arm/mach-pxa/trizeps4-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/trizeps4.h (98%) rename drivers/pcmcia/pxa2xx_viper.c => arch/arm/mach-pxa/viper-pcmcia.c (97%) rename include/linux/platform_data/pcmcia-pxa2xx_viper.h => arch/arm/mach-pxa/viper-pcmcia.h (100%) rename drivers/pcmcia/pxa2xx_vpac270.c => arch/arm/mach-pxa/vpac270-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/vpac270.h (100%) rename {arch/arm/plat-pxa => drivers/soc/pxa}/Kconfig (83%) rename {arch/arm/plat-pxa => drivers/soc/pxa}/Makefile (51%) rename {arch/arm/plat-pxa => drivers/soc/pxa}/mfp.c (99%) rename {arch/arm/plat-pxa => drivers/soc/pxa}/ssp.c (100%) create mode 100644 drivers/video/backlight/tosa_bl.h rename arch/arm/mach-pxa/include/mach/regs-lcd.h => drivers/video/fbdev/pxa3xx-regs.h (90%) create mode 100644 include/linux/clk/pxa.h create mode 100644 include/linux/platform_data/asoc-poodle.h rename arch/arm/mach-pxa/include/mach/audio.h => include/linux/platform_data/asoc-pxa.h (93%) rename arch/arm/mach-pxa/include/mach/hardware.h => include/linux/soc/pxa/cpu.h (75%) rename {arch/arm/plat-pxa/include/plat => include/linux/soc/pxa}/mfp.h (98%) create mode 100644 include/linux/soc/pxa/smemc.h create mode 100644 include/pcmcia/soc_common.h rename arch/arm/mach-pxa/include/mach/regs-ac97.h => sound/arm/pxa2xx-ac97-regs.h (71%) -- 2.20.0

9 53

[PATCH v2] ASoC: soc-compress: prevent the potentially use of null pointer
by Jiasheng Jiang 02 Mar '22

02 Mar '22

There is one call trace that snd_soc_register_card() ->snd_soc_bind_card()->soc_init_pcm_runtime() ->snd_soc_dai_compress_new()->snd_soc_new_compress(). In the trace the 'codec_dai' transfers from card->dai_link, and we can see from the snd_soc_add_pcm_runtime() in snd_soc_bind_card() that, if value of card->dai_link->num_codecs is 0, then 'codec_dai' could be null pointer caused by index out of bound in 'asoc_rtd_to_codec(rtd, 0)'. And snd_soc_register_card() is called by various platforms. Therefore, it is better to add the check in the case of misusing. And because 'cpu_dai' has already checked in soc_init_pcm_runtime(), there is no need to check again. Adding the check as follow, then if 'codec_dai' is null, snd_soc_new_compress() will not pass through the check 'if (playback + capture != 1)', avoiding the leftover use of 'codec_dai'. Fixes: 467fece ("ASoC: soc-dai: move snd_soc_dai_stream_valid() to soc-dai.c") Signed-off-by: Jiasheng Jiang <jiasheng(a)iscas.ac.cn> Reported-by: kernel test robot <lkp(a)intel.com> Reported-by: Dan Carpenter <dan.carpenter(a)oracle.com> --- sound/soc/soc-compress.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/sound/soc/soc-compress.c b/sound/soc/soc-compress.c index b4f5935..67c3df1 100644 --- a/sound/soc/soc-compress.c +++ b/sound/soc/soc-compress.c @@ -535,12 +535,14 @@ int snd_soc_new_compress(struct snd_soc_pcm_runtime *rtd, int num) } /* check client and interface hw capabilities */ - if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_PLAYBACK) && - snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_PLAYBACK)) - playback = 1; - if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_CAPTURE) && - snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_CAPTURE)) - capture = 1; + if (codec_dai) { + if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_PLAYBACK) && + snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_PLAYBACK)) + playback = 1; + if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_CAPTURE) && + snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_CAPTURE)) + capture = 1; + } /* * Compress devices are unidirectional so only one of the directions -- 2.7.4

2 1

[PATCH 1/4] ALSA: hda/realtek: fix mute/micmute LEDs for HP 855 G8
by Jeremy Szu 08 Feb '22

08 Feb '22

The HP EliteBook 855 G8 Notebook PC is using ALC285 codec which needs ALC285_FIXUP_HP_MUTE_LED fixup to make it works. After applying the fixup, the mute/micmute LEDs work good. Signed-off-by: Jeremy Szu <jeremy.szu(a)canonical.com> --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 552e2cb73291..9d68f591c6bf 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8291,6 +8291,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x87f7, "HP Spectre x360 14", ALC245_FIXUP_HP_X360_AMP), SND_PCI_QUIRK(0x103c, 0x8846, "HP EliteBook 850 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x884c, "HP EliteBook 840 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED), + SND_PCI_QUIRK(0x103c, 0x8896, "HP EliteBook 855 G8 Notebook PC", ALC285_FIXUP_HP_MUTE_LED), SND_PCI_QUIRK(0x103c, 0x8898, "HP EliteBook 845 G8 Notebook PC", ALC285_FIXUP_HP_LIMIT_INT_MIC_BOOST), SND_PCI_QUIRK(0x1043, 0x103e, "ASUS X540SA", ALC256_FIXUP_ASUS_MIC), SND_PCI_QUIRK(0x1043, 0x103f, "ASUS TX300", ALC282_FIXUP_ASUS_TX300), -- 2.31.1

3 5

[PATCH 0/5] ASoC: Intel: machine driver updates for 5.16
by Pierre-Louis Bossart 23 Dec '21

23 Dec '21

One quirk for a Dell TigerLake/SoundWire device, and initial support for platforms based on the ES8336 codec (aka ES8316). For full functionality, an update of the codec driver will be needed. Pierre-Louis Bossart (5): ASoC: Intel: soc-acpi: apl/glk/tgl: add entry for devices based on ES8336 codec ALSA: intel-dsp-config: add quirk for APL/GLK/TGL devices based on ES8336 codec ASoC: Intel: add machine driver for SOF+ES8336 ASoC: Intel: soc-acpi: add missing quirk for TGL SDCA single amp ASoC: Intel: sof_sdw: add missing quirk for Dell SKU 0A45 sound/hda/intel-dsp-config.c | 22 +- sound/soc/intel/boards/Kconfig | 14 + sound/soc/intel/boards/Makefile | 2 + sound/soc/intel/boards/sof_es8336.c | 569 ++++++++++++++++++ sound/soc/intel/boards/sof_sdw.c | 10 + .../intel/common/soc-acpi-intel-bxt-match.c | 6 + .../intel/common/soc-acpi-intel-glk-match.c | 7 +- .../intel/common/soc-acpi-intel-tgl-match.c | 47 ++ 8 files changed, 674 insertions(+), 3 deletions(-) create mode 100644 sound/soc/intel/boards/sof_es8336.c -- 2.25.1

3 10

[PATCH] ALSA: pcm: comment about relation between msbits hw parameter and [S|U32] formats
by Takashi Sakamoto 13 Dec '21

13 Dec '21

Regarding to handling [U|S][32|24] PCM formats, many userspace application developers and driver developers have confusion, since they require them to understand justification or padding. It easily loses consistency and soundness to operate with many type of devices. In this commit, I attempt to solve the situation by adding comment about relation between [S|U]32 formats and 'msbits' hardware parameter. The formats are used for 'left-justified' sample format, and the available bit count in most significant bit is delivered to userspace in msbits hardware parameter (struct snd_pcm_hw_params.msbits), which is decided by msbits constraint added by pcm drivers (snd_pcm_hw_constraint_msbits()). In driver side, the msbits constraint includes two elements; the physical width of format and the available width of the format in most significant bit. The former is used to match SAMPLE_BITS of format. (For my convenience, I ignore wildcard in the usage of the constraint.) As a result of interaction between ALSA pcm core and ALSA pcm application, when the format in which SAMPLE_BITS equals to physical width of the msbits constaint, the msbits parameter is set by referring to the available width of the constraint. When the msbits parameter is not changed in the above process, ALSA pcm core set it alternatively with SAMPLE_BIT of chosen format. In userspace application side, the msbits is only available after calling ioctl(2) with SNDRV_PCM_IOCTL_HW_PARAMS request. Even if the hardware parameter structure includes somewhat value of SAMPLE_BITS interval parameter as width of format, all of the width is not always available since msbits can be less than the width. I note that [S|U24] formats are used for 'right-justified' 24 bit sample formats within 32 bit frame. The first byte in most significant bit should be invalidated. Although the msbits exposed to userspace should be zero as invalid value, actually it is 32 from physical width of format. Signed-off-by: Takashi Sakamoto <o-takashi(a)sakamocchi.jp> --- include/sound/pcm.h | 3 +++ include/uapi/sound/asound.h | 3 +++ 2 files changed, 6 insertions(+) diff --git a/include/sound/pcm.h b/include/sound/pcm.h index 2e1200d17d0c..b84ff6e4ee53 100644 --- a/include/sound/pcm.h +++ b/include/sound/pcm.h @@ -147,6 +147,9 @@ struct snd_pcm_ops { #define SNDRV_PCM_FMTBIT_S24_BE _SNDRV_PCM_FMTBIT(S24_BE) #define SNDRV_PCM_FMTBIT_U24_LE _SNDRV_PCM_FMTBIT(U24_LE) #define SNDRV_PCM_FMTBIT_U24_BE _SNDRV_PCM_FMTBIT(U24_BE) +// For S32/U32 formats, 'msbits' hardware parameter is often used to deliver information about the +// available bit count in most significant bit. It's for the case of so-called 'left-justified' or +// `right-padding` sample which has less width than 32 bit. #define SNDRV_PCM_FMTBIT_S32_LE _SNDRV_PCM_FMTBIT(S32_LE) #define SNDRV_PCM_FMTBIT_S32_BE _SNDRV_PCM_FMTBIT(S32_BE) #define SNDRV_PCM_FMTBIT_U32_LE _SNDRV_PCM_FMTBIT(U32_LE) diff --git a/include/uapi/sound/asound.h b/include/uapi/sound/asound.h index d17c061950df..b43ea0067e1f 100644 --- a/include/uapi/sound/asound.h +++ b/include/uapi/sound/asound.h @@ -202,6 +202,9 @@ typedef int __bitwise snd_pcm_format_t; #define SNDRV_PCM_FORMAT_S24_BE ((__force snd_pcm_format_t) 7) /* low three bytes */ #define SNDRV_PCM_FORMAT_U24_LE ((__force snd_pcm_format_t) 8) /* low three bytes */ #define SNDRV_PCM_FORMAT_U24_BE ((__force snd_pcm_format_t) 9) /* low three bytes */ +// For S32/U32 formats, 'msbits' hardware parameter is often used to deliver information about the +// available bit count in most significant bit. It's for the case of so-called 'left-justified' or +// `right-padding` sample which has less width than 32 bit. #define SNDRV_PCM_FORMAT_S32_LE ((__force snd_pcm_format_t) 10) #define SNDRV_PCM_FORMAT_S32_BE ((__force snd_pcm_format_t) 11) #define SNDRV_PCM_FORMAT_U32_LE ((__force snd_pcm_format_t) 12) -- 2.27.0

2 5

[PATCH v2] ASoC: amd: Convert to new style DAI format definitions
by Mark Brown 09 Dec '21

09 Dec '21

Convert the AMD machine drivers to use the new style defines for clocking in DAI formats. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- sound/soc/amd/acp-da7219-max98357a.c | 20 ++++++++++---------- sound/soc/amd/acp-rt5645.c | 4 ++-- sound/soc/amd/acp3x-rt5682-max9836.c | 8 ++++---- 3 files changed, 16 insertions(+), 16 deletions(-) diff --git a/sound/soc/amd/acp-da7219-max98357a.c b/sound/soc/amd/acp-da7219-max98357a.c index b2065f3fe42c..3bf86c2424ae 100644 --- a/sound/soc/amd/acp-da7219-max98357a.c +++ b/sound/soc/amd/acp-da7219-max98357a.c @@ -522,7 +522,7 @@ static struct snd_soc_dai_link cz_dai_7219_98357[] = { .name = "amd-da7219-play", .stream_name = "Playback", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM, + | SND_SOC_DAIFMT_CBP_CFP, .init = cz_da7219_init, .dpcm_playback = 1, .stop_dma_first = 1, @@ -533,7 +533,7 @@ static struct snd_soc_dai_link cz_dai_7219_98357[] = { .name = "amd-da7219-cap", .stream_name = "Capture", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM, + | SND_SOC_DAIFMT_CBP_CFP, .dpcm_capture = 1, .stop_dma_first = 1, .ops = &cz_da7219_cap_ops, @@ -543,7 +543,7 @@ static struct snd_soc_dai_link cz_dai_7219_98357[] = { .name = "amd-max98357-play", .stream_name = "HiFi Playback", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM, + | SND_SOC_DAIFMT_CBP_CFP, .dpcm_playback = 1, .stop_dma_first = 1, .ops = &cz_max_play_ops, @@ -554,7 +554,7 @@ static struct snd_soc_dai_link cz_dai_7219_98357[] = { .name = "dmic0", .stream_name = "DMIC0 Capture", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM, + | SND_SOC_DAIFMT_CBP_CFP, .dpcm_capture = 1, .stop_dma_first = 1, .ops = &cz_dmic0_cap_ops, @@ -565,7 +565,7 @@ static struct snd_soc_dai_link cz_dai_7219_98357[] = { .name = "dmic1", .stream_name = "DMIC1 Capture", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM, + | SND_SOC_DAIFMT_CBP_CFP, .dpcm_capture = 1, .stop_dma_first = 1, .ops = &cz_dmic1_cap_ops, @@ -578,7 +578,7 @@ static struct snd_soc_dai_link cz_dai_5682_98357[] = { .name = "amd-rt5682-play", .stream_name = "Playback", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM, + | SND_SOC_DAIFMT_CBP_CFP, .init = cz_rt5682_init, .dpcm_playback = 1, .stop_dma_first = 1, @@ -589,7 +589,7 @@ static struct snd_soc_dai_link cz_dai_5682_98357[] = { .name = "amd-rt5682-cap", .stream_name = "Capture", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM, + | SND_SOC_DAIFMT_CBP_CFP, .dpcm_capture = 1, .stop_dma_first = 1, .ops = &cz_rt5682_cap_ops, @@ -599,7 +599,7 @@ static struct snd_soc_dai_link cz_dai_5682_98357[] = { .name = "amd-max98357-play", .stream_name = "HiFi Playback", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM, + | SND_SOC_DAIFMT_CBP_CFP, .dpcm_playback = 1, .stop_dma_first = 1, .ops = &cz_rt5682_max_play_ops, @@ -610,7 +610,7 @@ static struct snd_soc_dai_link cz_dai_5682_98357[] = { .name = "dmic0", .stream_name = "DMIC0 Capture", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM, + | SND_SOC_DAIFMT_CBP_CFP, .dpcm_capture = 1, .stop_dma_first = 1, .ops = &cz_rt5682_dmic0_cap_ops, @@ -621,7 +621,7 @@ static struct snd_soc_dai_link cz_dai_5682_98357[] = { .name = "dmic1", .stream_name = "DMIC1 Capture", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM, + | SND_SOC_DAIFMT_CBP_CFP, .dpcm_capture = 1, .stop_dma_first = 1, .ops = &cz_rt5682_dmic1_cap_ops, diff --git a/sound/soc/amd/acp-rt5645.c b/sound/soc/amd/acp-rt5645.c index d6ba94677ac2..58b75cf399fc 100644 --- a/sound/soc/amd/acp-rt5645.c +++ b/sound/soc/amd/acp-rt5645.c @@ -111,7 +111,7 @@ static struct snd_soc_dai_link cz_dai_rt5650[] = { .name = "amd-rt5645-play", .stream_name = "RT5645_AIF1", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM, + | SND_SOC_DAIFMT_CBP_CFP, .init = cz_init, .ops = &cz_aif1_ops, SND_SOC_DAILINK_REG(designware1, codec, platform), @@ -120,7 +120,7 @@ static struct snd_soc_dai_link cz_dai_rt5650[] = { .name = "amd-rt5645-cap", .stream_name = "RT5645_AIF1", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM, + | SND_SOC_DAIFMT_CBP_CFP, .ops = &cz_aif1_ops, SND_SOC_DAILINK_REG(designware2, codec, platform), }, diff --git a/sound/soc/amd/acp3x-rt5682-max9836.c b/sound/soc/amd/acp3x-rt5682-max9836.c index e561464f7d60..dad70436d063 100644 --- a/sound/soc/amd/acp3x-rt5682-max9836.c +++ b/sound/soc/amd/acp3x-rt5682-max9836.c @@ -51,7 +51,7 @@ static int acp3x_5682_init(struct snd_soc_pcm_runtime *rtd) /* set rt5682 dai fmt */ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM); + | SND_SOC_DAIFMT_CBP_CFP); if (ret < 0) { dev_err(rtd->card->dev, "Failed to set rt5682 dai fmt: %d\n", ret); @@ -302,7 +302,7 @@ static struct snd_soc_dai_link acp3x_dai[] = { .name = "acp3x-5682-play", .stream_name = "Playback", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM, + | SND_SOC_DAIFMT_CBP_CFP, .init = acp3x_5682_init, .dpcm_playback = 1, .dpcm_capture = 1, @@ -313,7 +313,7 @@ static struct snd_soc_dai_link acp3x_dai[] = { .name = "acp3x-max98357-play", .stream_name = "HiFi Playback", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBS_CFS, + | SND_SOC_DAIFMT_CBC_CFC, .dpcm_playback = 1, .ops = &acp3x_max_play_ops, .cpus = acp3x_bt, @@ -325,7 +325,7 @@ static struct snd_soc_dai_link acp3x_dai[] = { .name = "acp3x-ec-dmic0-capture", .stream_name = "Capture DMIC0", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBS_CFS, + | SND_SOC_DAIFMT_CBC_CFC, .dpcm_capture = 1, .ops = &acp3x_ec_cap0_ops, SND_SOC_DAILINK_REG(acp3x_bt, cros_ec, platform), -- 2.20.1

1 1

[PATCH] Sound: Add support for the Pioneer DJM 750MK2 Mixer/Soundcard
by William Overton 02 Dec '21

02 Dec '21

The kernel already has support for very similar Pioneer djm products and this work is based on that. Added device to quirks-table.h and added control info to mixer_quirks.c. Tested on my hardware and all working. Signed-off-by: William Overton <willovertonuk(a)gmail.com> --- sound/usb/mixer_quirks.c | 34 +++++++++++++++++++++++ sound/usb/quirks-table.h | 58 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 92 insertions(+) diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index 46082dc57be0..d489c1de3bae 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -2795,6 +2795,7 @@ static int snd_bbfpro_controls_create(struct usb_mixer_interface *mixer) #define SND_DJM_750_IDX 0x1 #define SND_DJM_850_IDX 0x2 #define SND_DJM_900NXS2_IDX 0x3 +#define SND_DJM_750MK2_IDX 0x4 #define SND_DJM_CTL(_name, suffix, _default_value, _windex) { \ @@ -2984,10 +2985,40 @@ static const struct snd_djm_ctl snd_djm_ctls_900nxs2[] = { SND_DJM_CTL("Ch5 Input", 900nxs2_cap5, 3, SND_DJM_WINDEX_CAP) }; +// DJM-750MK2 +static const u16 snd_djm_opts_750mk2_cap1[] = { + 0x0100, 0x0102, 0x0103, 0x0106, 0x0107, 0x0108, 0x0109, 0x010a }; +static const u16 snd_djm_opts_750mk2_cap2[] = { + 0x0200, 0x0202, 0x0203, 0x0206, 0x0207, 0x0208, 0x0209, 0x020a }; +static const u16 snd_djm_opts_750mk2_cap3[] = { + 0x0300, 0x0302, 0x0303, 0x0306, 0x0307, 0x0308, 0x0309, 0x030a }; +static const u16 snd_djm_opts_750mk2_cap4[] = { + 0x0400, 0x0402, 0x0403, 0x0406, 0x0407, 0x0408, 0x0409, 0x040a }; +static const u16 snd_djm_opts_750mk2_cap5[] = { + 0x0507, 0x0508, 0x0509, 0x050a, 0x0511, 0x0512, 0x0513, 0x0514 }; + +static const u16 snd_djm_opts_750mk2_pb1[] = { 0x0100, 0x0101, 0x0104 }; +static const u16 snd_djm_opts_750mk2_pb2[] = { 0x0200, 0x0201, 0x0204 }; +static const u16 snd_djm_opts_750mk2_pb3[] = { 0x0300, 0x0301, 0x0304 }; + + +static const struct snd_djm_ctl snd_djm_ctls_750mk2[] = { + SND_DJM_CTL("Capture Level", cap_level, 0, SND_DJM_WINDEX_CAPLVL), + SND_DJM_CTL("Ch1 Input", 750mk2_cap1, 2, SND_DJM_WINDEX_CAP), + SND_DJM_CTL("Ch2 Input", 750mk2_cap2, 2, SND_DJM_WINDEX_CAP), + SND_DJM_CTL("Ch3 Input", 750mk2_cap3, 2, SND_DJM_WINDEX_CAP), + SND_DJM_CTL("Ch4 Input", 750mk2_cap4, 2, SND_DJM_WINDEX_CAP), + SND_DJM_CTL("Ch5 Input", 750mk2_cap5, 3, SND_DJM_WINDEX_CAP), + SND_DJM_CTL("Ch1 Output", 750mk2_pb1, 0, SND_DJM_WINDEX_PB), + SND_DJM_CTL("Ch2 Output", 750mk2_pb2, 1, SND_DJM_WINDEX_PB), + SND_DJM_CTL("Ch3 Output", 750mk2_pb3, 2, SND_DJM_WINDEX_PB) +}; + static const struct snd_djm_device snd_djm_devices[] = { SND_DJM_DEVICE(250mk2), SND_DJM_DEVICE(750), + SND_DJM_DEVICE(750mk2), SND_DJM_DEVICE(850), SND_DJM_DEVICE(900nxs2) }; @@ -3235,6 +3266,9 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer) case USB_ID(0x08e4, 0x017f): /* Pioneer DJ DJM-750 */ err = snd_djm_controls_create(mixer, SND_DJM_750_IDX); break; + case USB_ID(0x2b73, 0x001b): /* Pioneer DJ DJM-750MK2 */ + err = snd_djm_controls_create(mixer, SND_DJM_750MK2_IDX); + break; case USB_ID(0x08e4, 0x0163): /* Pioneer DJ DJM-850 */ err = snd_djm_controls_create(mixer, SND_DJM_850_IDX); break; diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index e03043f7dad3..bc0116273e94 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3850,6 +3850,64 @@ YAMAHA_DEVICE(0x7010, "UB99"), } } }, +{ + /* + * Pioneer DJ DJM-750MK2 + * 10 channels playback & 12 channels capture @ 48kHz S24LE + */ + USB_DEVICE_VENDOR_SPEC(0x2b73, 0x001b), + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_COMPOSITE, + .data = (const struct snd_usb_audio_quirk[]) { + { + .ifnum = 0, + .type = QUIRK_AUDIO_FIXED_ENDPOINT, + .data = &(const struct audioformat) { + .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .channels = 10, + .iface = 0, + .altsetting = 1, + .altset_idx = 1, + .endpoint = 0x01, + .ep_attr = USB_ENDPOINT_XFER_ISOC| + USB_ENDPOINT_SYNC_ASYNC, + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, + .nr_rates = 1, + .rate_table = (unsigned int[]) { + 48000 + } + } + }, + { + .ifnum = 0, + .type = QUIRK_AUDIO_FIXED_ENDPOINT, + .data = &(const struct audioformat) { + .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .channels = 12, + .iface = 0, + .altsetting = 1, + .altset_idx = 1, + .endpoint = 0x82, + .ep_idx = 1, + .ep_attr = USB_ENDPOINT_XFER_ISOC| + USB_ENDPOINT_SYNC_ASYNC| + USB_ENDPOINT_USAGE_IMPLICIT_FB, + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, + .nr_rates = 1, + .rate_table = (unsigned int[]) { 48000 } + } + }, + { + .ifnum = -1 + } + } + } +}, { /* * Pioneer DJ DJM-850 -- 2.30.2

3 2

[PATCH v5 0/6] Multiple headphone codec driver support
by Brent Lu 30 Nov '21

30 Nov '21

Support multiple headphone drivers in same machine driver. In this case, both rt5682 and rt5682s are supported and enumerated by different ACPI HID "10EC5682" and "RTL5682". V2 Changes: - remove useless 'NULL', 'false' in if-condition - can use 'comp_ids' field alone to enumerate driver - add comma to the end of entry in structure initialization - keep the table of byt/cht/cml/icl untouched V3 Changes: - upstreamd from SOF github, PR#3200 - use new compatiable IDs to shrink the enumerate table of BYT and CHT - add 'const' to snd_soc_acpi_codecs structures V4 Changes: - add signoff to patch 4~6 V5 Changes: - none, just rebase for patch 3 conflict Brent Lu (3): ASoC: soc-acpi: add comp_ids field for machine driver matching ASoC: Intel: sof_rt5682: detect codec variant in probe function ASoC: Intel: sof_rt5682: use comp_ids to enumerate rt5682s Pierre-Louis Bossart (3): ASoC: Intel: soc-acpi-byt: shrink tables using compatible IDs ASoC: Intel: soc-acpi-cht: shrink tables using compatible IDs ASoC: Intel: soc-acpi: use const for all uses of snd_soc_acpi_codecs include/sound/soc-acpi.h | 3 + sound/soc/intel/boards/sof_rt5682.c | 34 ++------- .../intel/common/soc-acpi-intel-adl-match.c | 11 ++- .../intel/common/soc-acpi-intel-bxt-match.c | 2 +- .../intel/common/soc-acpi-intel-byt-match.c | 68 +++++++----------- .../intel/common/soc-acpi-intel-cht-match.c | 69 +++++++------------ .../intel/common/soc-acpi-intel-cml-match.c | 8 +-- .../intel/common/soc-acpi-intel-glk-match.c | 2 +- .../intel/common/soc-acpi-intel-jsl-match.c | 43 ++++-------- .../intel/common/soc-acpi-intel-kbl-match.c | 12 ++-- .../intel/common/soc-acpi-intel-skl-match.c | 2 +- .../intel/common/soc-acpi-intel-tgl-match.c | 11 ++- sound/soc/soc-acpi.c | 24 ++++++- 13 files changed, 119 insertions(+), 170 deletions(-) -- 2.25.1

4 9

[PATCH 0/5] xen: cleanup detection of non-essential pv devices
by Juergen Gross 25 Nov '21

25 Nov '21

Today the non-essential pv devices are hard coded in the xenbus driver and this list is lacking multiple entries. This series reworks the detection logic of non-essential devices by adding a flag for that purpose to struct xenbus_driver. Juergen Gross (5): xen: add "not_essential" flag to struct xenbus_driver xen: flag xen_drm_front to be not essential for system boot xen: flag hvc_xen to be not essential for system boot xen: flag pvcalls-front to be not essential for system boot xen: flag xen_snd_front to be not essential for system boot drivers/gpu/drm/xen/xen_drm_front.c | 1 + drivers/input/misc/xen-kbdfront.c | 1 + drivers/tty/hvc/hvc_xen.c | 1 + drivers/video/fbdev/xen-fbfront.c | 1 + drivers/xen/pvcalls-front.c | 1 + drivers/xen/xenbus/xenbus_probe_frontend.c | 14 +++----------- include/xen/xenbus.h | 1 + sound/xen/xen_snd_front.c | 1 + 8 files changed, 10 insertions(+), 11 deletions(-) -- 2.26.2

5 8